I'm announcing the release of the 6.9.1 kernel.
All users of the 6.9 kernel series must upgrade.
The updated 6.9.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-6.9.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
drivers/dma/idxd/cdev.c | 77 +++++++++++++++++++++++
drivers/dma/idxd/idxd.h | 3
drivers/dma/idxd/init.c | 4 +
drivers/dma/idxd/registers.h | 3
drivers/dma/idxd/sysfs.c | 27 +++++++-
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 4 +
drivers/vfio/pci/vfio_pci.c | 2
include/linux/pci_ids.h | 2
security/keys/key.c | 3
10 files changed, 120 insertions(+), 7 deletions(-)
Arjan van de Ven (2):
VFIO: Add the SPR_DSA and SPR_IAX devices to the denylist
dmaengine: idxd: add a new security check to deal with a hardware erratum
Ben Greear (1):
wifi: mt76: mt7915: add missing chanctx ops
Greg Kroah-Hartman (1):
Linux 6.9.1
Nikhil Rao (1):
dmaengine: idxd: add a write() method for applications to submit work
Silvio Gissi (1):
keys: Fix overwrite of key expiration on instantiation
PERST# is active low according to the PCIe specification.
However, the existing pcie-dw-rockchip.c driver does:
gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1);
When asserting + deasserting PERST#.
This is of course wrong, but because all the device trees for this
compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH:
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568*
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*
The actual toggling of PERST# is correct.
(And we cannot change it anyway, since that would break device tree
compatibility.)
However, this driver does request the GPIO to be initialized as
GPIOD_OUT_HIGH, which does cause a silly sequence where PERST# gets
toggled back and forth for no good reason.
Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW
(which for this driver means PERST# asserted).
This will avoid an unnecessary signal change where PERST# gets deasserted
(by devm_gpiod_get_optional()) and then gets asserted
(by rockchip_pcie_start_link()) just a few instructions later.
Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST# asserted by host!
[ 852.483985] pci: PERST# de-asserted by host!
[ 852.503041] pci: PERST# asserted by host!
[ 852.610318] pci: PERST# de-asserted by host!
After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST# asserted by host!
[ 132.111429] pci: PERST# de-asserted by host!
This extra, very short, PERST# assertion + deassertion has been reported
to cause issues with certain WLAN controllers, e.g. RTL8822CE.
Fixes: 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Tested-by: Jianfeng Liu <liujianfeng1994(a)gmail.com>
Tested-by: Heiko Stuebner <heiko(a)sntech.de>
Signed-off-by: Niklas Cassel <cassel(a)kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org>
Cc: stable(a)vger.kernel.org # 5.15+
---
Changes since v2:
-Picked up tag from Heiko.
-Change subject (Bjorn).
-s/PERST/PERST#/ (Bjorn).
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index d6842141d384..a909e42b4273 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -240,7 +240,7 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev,
return PTR_ERR(rockchip->apb_base);
rockchip->rst_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
- GPIOD_OUT_HIGH);
+ GPIOD_OUT_LOW);
if (IS_ERR(rockchip->rst_gpio))
return PTR_ERR(rockchip->rst_gpio);
--
2.44.0