May 2024 - Linux-stable-mirror

[PATCH net] mptcp: only allow set existing scheduler for net.mptcp.scheduler

by Matthieu Baerts (NGI0)

From: Gregory Detal <gregory.detal(a)gmail.com> The current behavior is to accept any strings as inputs, this results in an inconsistent result where an unexisting scheduler can be set: # sysctl -w net.mptcp.scheduler=notdefault net.mptcp.scheduler = notdefault This patch changes this behavior by checking for existing scheduler before accepting the input. Fixes: e3b2870b6d22 ("mptcp: add a new sysctl scheduler") Cc: stable(a)vger.kernel.org Signed-off-by: Gregory Detal <gregory.detal(a)gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Tested-by: Geliang Tang <geliang(a)kernel.org> Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- net/mptcp/ctrl.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/net/mptcp/ctrl.c b/net/mptcp/ctrl.c index 13fe0748dde8..2963ba84e2ee 100644 --- a/net/mptcp/ctrl.c +++ b/net/mptcp/ctrl.c @@ -96,6 +96,43 @@ static void mptcp_pernet_set_defaults(struct mptcp_pernet *pernet) } #ifdef CONFIG_SYSCTL +static int mptcp_set_scheduler(const struct net *net, const char *name) +{ + struct mptcp_pernet *pernet = mptcp_get_pernet(net); + struct mptcp_sched_ops *sched; + int ret = 0; + + rcu_read_lock(); + sched = mptcp_sched_find(name); + if (sched) + strscpy(pernet->scheduler, name, MPTCP_SCHED_NAME_MAX); + else + ret = -ENOENT; + rcu_read_unlock(); + + return ret; +} + +static int proc_scheduler(struct ctl_table *ctl, int write, + void *buffer, size_t *lenp, loff_t *ppos) +{ + const struct net *net = current->nsproxy->net_ns; + char val[MPTCP_SCHED_NAME_MAX]; + struct ctl_table tbl = { + .data = val, + .maxlen = MPTCP_SCHED_NAME_MAX, + }; + int ret; + + strscpy(val, mptcp_get_scheduler(net), MPTCP_SCHED_NAME_MAX); + + ret = proc_dostring(&tbl, write, buffer, lenp, ppos); + if (write && ret == 0) + ret = mptcp_set_scheduler(net, val); + + return ret; +} + static struct ctl_table mptcp_sysctl_table[] = { { .procname = "enabled", @@ -148,7 +185,7 @@ static struct ctl_table mptcp_sysctl_table[] = { .procname = "scheduler", .maxlen = MPTCP_SCHED_NAME_MAX, .mode = 0644, - .proc_handler = proc_dostring, + .proc_handler = proc_scheduler, }, { .procname = "close_timeout", --- base-commit: a26ff37e624d12e28077e5b24d2b264f62764ad6 change-id: 20240506-upstream-net-20240506-mptcp-sched-exist-6a1b91872a32 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

1 year, 6 months

2
1
0 0

[PATCH AUTOSEL 6.6 01/43] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ] The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index e609249cc38d5..651408c6f399d 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- 2.43.0

1 year, 6 months

2
43
0 0

[PATCH AUTOSEL 4.19 1/4] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

by Sasha Levin

From: Derek Fang <derek.fang(a)realtek.com> [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 5f23369d7ccad..fbb3fca59c8cb 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -412,6 +412,7 @@ struct rt5645_priv { struct regmap *regmap; struct i2c_client *i2c; struct gpio_desc *gpiod_hp_det; + struct gpio_desc *gpiod_cbj_sleeve; struct snd_soc_jack *hp_jack; struct snd_soc_jack *mic_jack; struct snd_soc_jack *btn_jack; @@ -3206,6 +3207,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, RT5645_CBJ_MN_JD, 0); + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1); + msleep(600); regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val); val &= 0x7; @@ -3222,6 +3226,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); rt5645->jack_type = SND_JACK_HEADPHONE; + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } if (rt5645->pdata.level_trigger_irq) regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, @@ -3247,6 +3253,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse if (rt5645->pdata.level_trigger_irq) regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV); + + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } return rt5645->jack_type; @@ -3892,6 +3901,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, return ret; } + rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve", + GPIOD_OUT_LOW); + + if (IS_ERR(rt5645->gpiod_cbj_sleeve)) { + ret = PTR_ERR(rt5645->gpiod_cbj_sleeve); + dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret); + if (ret != -ENOENT) + return ret; + } + for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++) rt5645->supplies[i].supply = rt5645_supply_names[i]; @@ -4135,6 +4154,9 @@ static int rt5645_i2c_remove(struct i2c_client *i2c) cancel_delayed_work_sync(&rt5645->jack_detect_work); cancel_delayed_work_sync(&rt5645->rcclock_work); + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); + regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies); return 0; @@ -4152,6 +4174,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c) 0); msleep(20); regmap_write(rt5645->regmap, RT5645_RESET, 0); + + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } static struct i2c_driver rt5645_i2c_driver = { -- 2.43.0

1 year, 6 months

1
3
0 0

[PATCH AUTOSEL 5.4 1/6] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

by Sasha Levin

From: Derek Fang <derek.fang(a)realtek.com> [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index c78d5833c9cd9..6aab552eda777 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -414,6 +414,7 @@ struct rt5645_priv { struct regmap *regmap; struct i2c_client *i2c; struct gpio_desc *gpiod_hp_det; + struct gpio_desc *gpiod_cbj_sleeve; struct snd_soc_jack *hp_jack; struct snd_soc_jack *mic_jack; struct snd_soc_jack *btn_jack; @@ -3169,6 +3170,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, RT5645_CBJ_MN_JD, 0); + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1); + msleep(600); regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val); val &= 0x7; @@ -3185,6 +3189,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); rt5645->jack_type = SND_JACK_HEADPHONE; + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } if (rt5645->pdata.level_trigger_irq) regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, @@ -3210,6 +3216,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse if (rt5645->pdata.level_trigger_irq) regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV); + + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } return rt5645->jack_type; @@ -3861,6 +3870,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, return ret; } + rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve", + GPIOD_OUT_LOW); + + if (IS_ERR(rt5645->gpiod_cbj_sleeve)) { + ret = PTR_ERR(rt5645->gpiod_cbj_sleeve); + dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret); + if (ret != -ENOENT) + return ret; + } + for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++) rt5645->supplies[i].supply = rt5645_supply_names[i]; @@ -4104,6 +4123,9 @@ static int rt5645_i2c_remove(struct i2c_client *i2c) cancel_delayed_work_sync(&rt5645->jack_detect_work); cancel_delayed_work_sync(&rt5645->rcclock_work); + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); + regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies); return 0; @@ -4121,6 +4143,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c) 0); msleep(20); regmap_write(rt5645->regmap, RT5645_RESET, 0); + + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } static struct i2c_driver rt5645_i2c_driver = { -- 2.43.0

1 year, 6 months

1
5
0 0

[PATCH AUTOSEL 5.15 01/15] regulator: irq_helpers: duplicate IRQ name

by Sasha Levin

From: Matti Vaittinen <mazziesaccount(a)gmail.com> [ Upstream commit 7ab681ddedd4b6dd2b047c74af95221c5f827e1d ] The regulator IRQ helper requires caller to provide pointer to IRQ name which is kept in memory by caller. All other data passed to the helper in the regulator_irq_desc structure is copied. This can cause some confusion and unnecessary complexity. Make the regulator_irq_helper() to copy also the provided IRQ name information so caller can discard the name after the call to regulator_irq_helper() completes. Signed-off-by: Matti Vaittinen <mazziesaccount(a)gmail.com> Link: https://msgid.link/r/ZhJMuUYwaZbBXFGP@drtxq0yyyyyyyyyyyyydy-3.rev.dnaintern… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/regulator/irq_helpers.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/regulator/irq_helpers.c b/drivers/regulator/irq_helpers.c index 5227644355750..a44a0b30a6516 100644 --- a/drivers/regulator/irq_helpers.c +++ b/drivers/regulator/irq_helpers.c @@ -350,6 +350,9 @@ void *regulator_irq_helper(struct device *dev, h->irq = irq; h->desc = *d; + h->desc.name = devm_kstrdup(dev, d->name, GFP_KERNEL); + if (!h->desc.name) + return ERR_PTR(-ENOMEM); ret = init_rdev_state(dev, h, rdev, common_errs, per_rdev_errs, rdev_amount); -- 2.43.0

1 year, 6 months

1
14
0 0

[PATCH AUTOSEL 4.19 1/3] wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class

by Sasha Levin

From: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> [ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ] The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/wireless/trace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 54b0bb344cf93..68d547a4a5a53 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1591,7 +1591,7 @@ TRACE_EVENT(rdev_return_void_tx_rx, DECLARE_EVENT_CLASS(tx_rx_evt, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx), + TP_ARGS(wiphy, tx, rx), TP_STRUCT__entry( WIPHY_ENTRY __field(u32, tx) @@ -1608,7 +1608,7 @@ DECLARE_EVENT_CLASS(tx_rx_evt, DEFINE_EVENT(tx_rx_evt, rdev_set_antenna, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx) + TP_ARGS(wiphy, tx, rx) ); DECLARE_EVENT_CLASS(wiphy_netdev_id_evt, -- 2.43.0

1 year, 6 months

1
2
0 0

[PATCH AUTOSEL 5.4 1/3] wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class

by Sasha Levin

From: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> [ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ] The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/wireless/trace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 8677d7ab7d692..5d2cf58fec126 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1630,7 +1630,7 @@ TRACE_EVENT(rdev_return_void_tx_rx, DECLARE_EVENT_CLASS(tx_rx_evt, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx), + TP_ARGS(wiphy, tx, rx), TP_STRUCT__entry( WIPHY_ENTRY __field(u32, tx) @@ -1647,7 +1647,7 @@ DECLARE_EVENT_CLASS(tx_rx_evt, DEFINE_EVENT(tx_rx_evt, rdev_set_antenna, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx) + TP_ARGS(wiphy, tx, rx) ); DECLARE_EVENT_CLASS(wiphy_netdev_id_evt, -- 2.43.0

1 year, 6 months

1
2
0 0

[PATCH AUTOSEL 5.10 1/3] wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class

by Sasha Levin

From: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> [ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ] The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/wireless/trace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 6e218a0acd4e3..9bd6a6ef5ee47 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1660,7 +1660,7 @@ TRACE_EVENT(rdev_return_void_tx_rx, DECLARE_EVENT_CLASS(tx_rx_evt, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx), + TP_ARGS(wiphy, tx, rx), TP_STRUCT__entry( WIPHY_ENTRY __field(u32, tx) @@ -1677,7 +1677,7 @@ DECLARE_EVENT_CLASS(tx_rx_evt, DEFINE_EVENT(tx_rx_evt, rdev_set_antenna, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx) + TP_ARGS(wiphy, tx, rx) ); DECLARE_EVENT_CLASS(wiphy_netdev_id_evt, -- 2.43.0

1 year, 6 months

1
2
0 0

[PATCH AUTOSEL 5.15 1/5] wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class

by Sasha Levin

From: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> [ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ] The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev(a)mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/wireless/trace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 19b78d4722834..dfd36cba14bc6 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1687,7 +1687,7 @@ TRACE_EVENT(rdev_return_void_tx_rx, DECLARE_EVENT_CLASS(tx_rx_evt, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx), + TP_ARGS(wiphy, tx, rx), TP_STRUCT__entry( WIPHY_ENTRY __field(u32, tx) @@ -1704,7 +1704,7 @@ DECLARE_EVENT_CLASS(tx_rx_evt, DEFINE_EVENT(tx_rx_evt, rdev_set_antenna, TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx), - TP_ARGS(wiphy, rx, tx) + TP_ARGS(wiphy, tx, rx) ); DECLARE_EVENT_CLASS(wiphy_netdev_id_evt, -- 2.43.0

1 year, 6 months

1
4
0 0

[PATCH AUTOSEL 6.1 01/12] wifi: mac80211: don't use rate mask for scanning

by Sasha Levin

From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit ab9177d83c040eba58387914077ebca56f14fae6 ] The rate mask is intended for use during operation, and can be set to only have masks for the currently active band. As such, it cannot be used for scanning which can be on other bands as well. Simply ignore the rate masks during scanning to avoid warnings from incorrect settings. Reported-by: syzbot+fdc5123366fb9c3fdc6d(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fdc5123366fb9c3fdc6d Co-developed-by: Dmitry Antipov <dmantipov(a)yandex.ru> Signed-off-by: Dmitry Antipov <dmantipov(a)yandex.ru> Tested-by: Dmitry Antipov <dmantipov(a)yandex.ru> Link: https://msgid.link/20240326220854.9594cbb418ca.I7f86c0ba1f98cf7e27c2bacf6c2… Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- include/net/mac80211.h | 3 +++ net/mac80211/rate.c | 6 +++++- net/mac80211/scan.c | 1 + net/mac80211/tx.c | 13 +++++++++---- 4 files changed, 18 insertions(+), 5 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 43173204d6d5e..87a4f334c22a8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -885,6 +885,8 @@ enum mac80211_tx_info_flags { * of their QoS TID or other priority field values. * @IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX: first MLO TX, used mostly internally * for sequence number assignment + * @IEEE80211_TX_CTRL_SCAN_TX: Indicates that this frame is transmitted + * due to scanning, not in normal operation on the interface. * @IEEE80211_TX_CTRL_MLO_LINK: If not @IEEE80211_LINK_UNSPECIFIED, this * frame should be transmitted on the specific link. This really is * only relevant for frames that do not have data present, and is @@ -905,6 +907,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_NO_SEQNO = BIT(7), IEEE80211_TX_CTRL_DONT_REORDER = BIT(8), IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX = BIT(9), + IEEE80211_TX_CTRL_SCAN_TX = BIT(10), IEEE80211_TX_CTRL_MLO_LINK = 0xf0000000, }; diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 9d33fd2377c88..a2bc9c5d92b8b 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -877,6 +877,7 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, struct ieee80211_sub_if_data *sdata; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_supported_band *sband; + u32 mask = ~0; rate_control_fill_sta_table(sta, info, dest, max_rates); @@ -889,9 +890,12 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, if (ieee80211_is_tx_data(skb)) rate_control_apply_mask(sdata, sta, sband, dest, max_rates); + if (!(info->control.flags & IEEE80211_TX_CTRL_SCAN_TX)) + mask = sdata->rc_rateidx_mask[info->band]; + if (dest[0].idx < 0) __rate_control_send_low(&sdata->local->hw, sband, sta, info, - sdata->rc_rateidx_mask[info->band]); + mask); if (sta) rate_fixup_ratelist(vif, sband, info, dest, max_rates); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index c37e2576f1c13..933d02d7c1284 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -647,6 +647,7 @@ static void ieee80211_send_scan_probe_req(struct ieee80211_sub_if_data *sdata, cpu_to_le16(IEEE80211_SN_TO_SEQ(sn)); } IEEE80211_SKB_CB(skb)->flags |= tx_flags; + IEEE80211_SKB_CB(skb)->control.flags |= IEEE80211_TX_CTRL_SCAN_TX; ieee80211_tx_skb_tid_band(sdata, skb, 7, channel->band); } } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 3d62e8b718740..419baf8efddea 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -720,11 +720,16 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) txrc.bss_conf = &tx->sdata->vif.bss_conf; txrc.skb = tx->skb; txrc.reported_rate.idx = -1; - txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; - if (tx->sdata->rc_has_mcs_mask[info->band]) - txrc.rate_idx_mcs_mask = - tx->sdata->rc_rateidx_mcs_mask[info->band]; + if (unlikely(info->control.flags & IEEE80211_TX_CTRL_SCAN_TX)) { + txrc.rate_idx_mask = ~0; + } else { + txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; + + if (tx->sdata->rc_has_mcs_mask[info->band]) + txrc.rate_idx_mcs_mask = + tx->sdata->rc_rateidx_mcs_mask[info->band]; + } txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || -- 2.43.0

1 year, 6 months

1
11
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2024