June 2024 - Linux-stable-mirror

[PATCH 0/2] arm64: dts: qcom: switch RB1 and RB2 platforms to i2c2-gpio

by Dmitry Baryshkov

On the Qualcomm RB1 and RB2 platforms the I2C bus connected to the LT9611UXC bridge under some circumstances can go into a state when all transfers timeout. This causes both issues with fetching of EDID and with updating of the bridge's firmware. While we are debugging the issue, switch corresponding I2C bus to use i2c-gpio driver. While using i2c-gpio no communication issues are observed. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> --- Dmitry Baryshkov (2): arm64: dts: qcom: qrb2210-rb1: switch I2C2 to i2c-gpio arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 13 ++++++++++++- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 13 ++++++++++++- 2 files changed, 24 insertions(+), 2 deletions(-) --- base-commit: 0e1980c40b6edfa68b6acf926bab22448a6e40c9 change-id: 20240604-rb12-i2c2g-pio-f6035fa8e022 Best regards, -- Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org>

9 months, 1 week

2
3
0 0

[PATCH v2 2/2] arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode

by Krishna Kurapati

On SC7280, in host mode, it is observed that stressing out controller results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instances in park mode for SC7280 to mitigate this issue. Reported-by: Doug Anderson <dianders(a)google.com> Cc: <stable(a)vger.kernel.org> Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by: Krishna Kurapati <quic_kriskura(a)quicinc.com> --- Removed RB/TB tag from Doug as commit text was updated. arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 41f51d326111..e0d3eeb6f639 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -4131,6 +4131,7 @@ usb_1_dwc3: usb@a600000 { iommus = <&apps_smmu 0xe0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; -- 2.34.1

9 months, 1 week

2
1
0 0

[PATCH v2 1/2] arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode

by Krishna Kurapati

On SC7180, in host mode, it is observed that stressing out controller results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instances in park mode for SC7180 to mitigate this issue. Reported-by: Doug Anderson <dianders(a)google.com> Cc: <stable(a)vger.kernel.org> Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes") Signed-off-by: Krishna Kurapati <quic_kriskura(a)quicinc.com> --- Removed RB/TB tag from Doug as commit text was updated. arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 2b481e20ae38..cc93b5675d5d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3063,6 +3063,7 @@ usb_1_dwc3: usb@a600000 { iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; -- 2.34.1

9 months, 1 week

4
6
0 0

Widespread breakage in v6.9.4-rc1

by Mark Brown

I'm not seeing a test mail for v6.9.4-rc1 but it's in the stable-rc git and I'm seeing extensive breakage on many platforms with it due to the backporting of c0e0f139354 ("drm: Make drivers depends on DRM_DW_HDMI") which was reverted upstream in commit 8f7f115596d3dcced ("Revert "drm: Make drivers depends on DRM_DW_HDMI"") for a combination of the reasons outlined in that revert and the extensive breakage that it cause in -next.

9 months, 1 week

2
2
0 0

[PATCH 1/2] mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos

by Ilpo Järvinen

jmicron_pmos() and sdhci_pci_probe() use pci_{read,write}_config_byte() that return PCIBIOS_* codes. The return code is then returned as is by jmicron_probe() and sdhci_pci_probe(). Similarly, the return code is also returned as is from jmicron_resume(). Both probe and resume functions should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning them the fix these issues. Fixes: 7582041ff3d4 ("mmc: sdhci-pci: fix simple_return.cocci warnings") Fixes: 45211e215984 ("sdhci: toggle JMicron PMOS setting") Cc: stable(a)vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> --- drivers/mmc/host/sdhci-pci-core.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index ef89ec382bfe..23e6ba70144c 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1326,7 +1326,7 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) ret = pci_read_config_byte(chip->pdev, 0xAE, &scratch); if (ret) - return ret; + goto fail; /* * Turn PMOS on [bit 0], set over current detection to 2.4 V @@ -1337,7 +1337,10 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) else scratch &= ~0x47; - return pci_write_config_byte(chip->pdev, 0xAE, scratch); + ret = pci_write_config_byte(chip->pdev, 0xAE, scratch); + +fail: + return pcibios_err_to_errno(ret); } static int jmicron_probe(struct sdhci_pci_chip *chip) @@ -2202,7 +2205,7 @@ static int sdhci_pci_probe(struct pci_dev *pdev, ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); if (ret) - return ret; + return pcibios_err_to_errno(ret); slots = PCI_SLOT_INFO_SLOTS(slots) + 1; dev_dbg(&pdev->dev, "found %d slot(s)\n", slots); @@ -2211,7 +2214,7 @@ static int sdhci_pci_probe(struct pci_dev *pdev, ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar); if (ret) - return ret; + return pcibios_err_to_errno(ret); first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK; -- 2.39.2

9 months, 1 week

3
5
0 0

[PATCH 1/2] EDAC/amd64: Convert PCIBIOS_* return codes to errnos

by Ilpo Järvinen

gpu_get_node_map() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is then returned all the way into the module init function amd64_edac_init() that returns it as is. The module init functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from gpu_get_node_map(). For consistency, convert also the other similar cases which return PCIBIOS_* codes even if they do not have any bugs at the moment. Fixes: 4251566ebc1c ("EDAC/amd64: Cache and use GPU node map") Cc: stable(a)vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> --- drivers/edac/amd64_edac.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 1f3520d76861..a17f3c0cdfa6 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -81,7 +81,7 @@ int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, amd64_warn("%s: error reading F%dx%03x.\n", func, PCI_FUNC(pdev->devfn), offset); - return err; + return pcibios_err_to_errno(err); } int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, @@ -94,7 +94,7 @@ int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, amd64_warn("%s: error writing to F%dx%03x.\n", func, PCI_FUNC(pdev->devfn), offset); - return err; + return pcibios_err_to_errno(err); } /* @@ -1025,8 +1025,10 @@ static int gpu_get_node_map(struct amd64_pvt *pvt) } ret = pci_read_config_dword(pdev, REG_LOCAL_NODE_TYPE_MAP, &tmp); - if (ret) + if (ret) { + ret = pcibios_err_to_errno(ret); goto out; + } gpu_node_map.node_count = FIELD_GET(LNTM_NODE_COUNT, tmp); gpu_node_map.base_node_id = FIELD_GET(LNTM_BASE_NODE_ID, tmp); -- 2.39.2

9 months, 1 week

3
3
0 0

[PATCH] Documentation: mtd: spinand: macronix: Add support for serial NAND flash

by Cheng Ming Lin

From: Cheng Ming Lin <chengminglin(a)mxic.com.tw> MX35UF{1,2,4}GE4AD and MX35UF{1,2}GE4AC have been merge into Linux kernel mainline. Commit ID: "c374839f9b4475173e536d1eaddff45cb481dbdf". For SPI-NAND flash support on Linux kernel LTS v5.4.y, add SPI-NAND flash MX35UF{1,2,4}GE4AD and MX35UF{1,2}GE4AC in id tables. Those five flashes have been validate on Xilinx zynq-picozed board and Linux kernel LTS v5.4.y. Signed-off-by: Cheng Ming Lin <chengminglin(a)mxic.com.tw> --- drivers/mtd/nand/spi/macronix.c | 45 +++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c index f18c6cfe8ff5..e1446798bfb3 100644 --- a/drivers/mtd/nand/spi/macronix.c +++ b/drivers/mtd/nand/spi/macronix.c @@ -132,6 +132,51 @@ static const struct spinand_info macronix_spinand_table[] = { &update_cache_variants), SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)), + SPINAND_INFO("MX35UF4GE4AD", 0xb7, + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, + mx35lf1ge4ab_ecc_get_status)), + SPINAND_INFO("MX35UF2GE4AD", 0xa6, + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, + mx35lf1ge4ab_ecc_get_status)), + SPINAND_INFO("MX35UF2GE4AC", 0xa2, + NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(4, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, + mx35lf1ge4ab_ecc_get_status)), + SPINAND_INFO("MX35UF1GE4AD", 0x96, + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, + mx35lf1ge4ab_ecc_get_status)), + SPINAND_INFO("MX35UF1GE4AC", 0x92, + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(4, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, + mx35lf1ge4ab_ecc_get_status)), }; static int macronix_spinand_detect(struct spinand_device *spinand) -- 2.25.1

9 months, 1 week

4
6
0 0

[PATCH bpf v1 1/2] Compiler Attributes: Add __retain macro

by Tony Ambardar

Some code includes the __used macro to prevent functions and data from being optimized out. This macro implements __attribute__((__used__)), which operates at the compiler and IR-level, and so still allows a linker to remove objects intended to be kept. Compilers supporting __attribute__((__retain__)) can address this gap by setting the flag SHF_GNU_RETAIN on the section of a function/variable, indicating to the linker the object should be retained. This attribute is available since gcc 11, clang 13, and binutils 2.36. Provide a __retain macro implementing __attribute__((__retain__)), whose first user will be the '__bpf_kfunc' tag. Link: https://lore.kernel.org/bpf/ZlmGoT9KiYLZd91S@krava/T/ Cc: stable(a)vger.kernel.org # v6.6+ Signed-off-by: Tony Ambardar <Tony.Ambardar(a)gmail.com> --- include/linux/compiler_attributes.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/compiler_attributes.h b/include/linux/compiler_attributes.h index 32284cd26d52..1c22e1a734dc 100644 --- a/include/linux/compiler_attributes.h +++ b/include/linux/compiler_attributes.h @@ -326,6 +326,20 @@ */ #define __pure __attribute__((__pure__)) +/* + * Optional: only supported since gcc >= 11, clang >= 13 + * + * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-re… + * clang: https://clang.llvm.org/docs/AttributeReference.html#retain + */ +#if __has_attribute(__retain__) && \ + (defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || \ + defined(CONFIG_LTO_CLANG)) +# define __retain __attribute__((__retain__)) +#else +# define __retain +#endif + /* * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-se… * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-se… -- 2.34.1

9 months, 1 week

2
2
0 0

[PATCH] drm/xe: Restrict user fences to long running VMs

by Matthew Brost

User fences are intended to be used on long running VMs, enforce this restriction. This addresses possible concerns of using user fences in dma-fence and having the dma-fence signal before the user fence. Fixes: d1df9bfbf68c ("drm/xe: Only allow 1 ufence per exec / bind IOCTL") Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: stable(a)vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost(a)intel.com> --- drivers/gpu/drm/xe/xe_exec.c | 3 ++- drivers/gpu/drm/xe/xe_vm.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_exec.c b/drivers/gpu/drm/xe/xe_exec.c index 97eeb973e897..a145813ad229 100644 --- a/drivers/gpu/drm/xe/xe_exec.c +++ b/drivers/gpu/drm/xe/xe_exec.c @@ -168,7 +168,8 @@ int xe_exec_ioctl(struct drm_device *dev, void *data, struct drm_file *file) num_ufence++; } - if (XE_IOCTL_DBG(xe, num_ufence > 1)) { + if (XE_IOCTL_DBG(xe, num_ufence > 1) || + XE_IOCTL_DBG(xe, num_ufence && !xe_vm_in_lr_mode(vm))) { err = -EINVAL; goto err_syncs; } diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 26b409e1b0f0..85da3a8a83b6 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -3226,7 +3226,8 @@ int xe_vm_bind_ioctl(struct drm_device *dev, void *data, struct drm_file *file) num_ufence++; } - if (XE_IOCTL_DBG(xe, num_ufence > 1)) { + if (XE_IOCTL_DBG(xe, num_ufence > 1) || + XE_IOCTL_DBG(xe, num_ufence && !xe_vm_in_lr_mode(vm))) { err = -EINVAL; goto free_syncs; } -- 2.34.1

9 months, 1 week

2
2
0 0

[PATCH] bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone

by Manivannan Sadhasivam

MHI endpoint stack accidentally started allocating memory for objects from DMA zone since commit 62210a26cd4f ("bus: mhi: ep: Use slab allocator where applicable"). But there is no real need to allocate memory from this naturally limited DMA zone. This also causes the MHI endpoint stack to run out of memory while doing high bandwidth transfers. So let's switch over to normal memory. Cc: stable(a)vger.kernel.org # 6.8 Fixes: 62210a26cd4f ("bus: mhi: ep: Use slab allocator where applicable") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> --- drivers/bus/mhi/ep/main.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c index f8f674adf1d4..4acfac73ca9a 100644 --- a/drivers/bus/mhi/ep/main.c +++ b/drivers/bus/mhi/ep/main.c @@ -90,7 +90,7 @@ static int mhi_ep_send_completion_event(struct mhi_ep_cntrl *mhi_cntrl, struct m struct mhi_ring_element *event; int ret; - event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL | GFP_DMA); + event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL); if (!event) return -ENOMEM; @@ -109,7 +109,7 @@ int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_stat struct mhi_ring_element *event; int ret; - event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL | GFP_DMA); + event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL); if (!event) return -ENOMEM; @@ -127,7 +127,7 @@ int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ee_type exec_e struct mhi_ring_element *event; int ret; - event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL | GFP_DMA); + event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL); if (!event) return -ENOMEM; @@ -146,7 +146,7 @@ static int mhi_ep_send_cmd_comp_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_e struct mhi_ring_element *event; int ret; - event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL | GFP_DMA); + event = kmem_cache_zalloc(mhi_cntrl->ev_ring_el_cache, GFP_KERNEL); if (!event) return -ENOMEM; @@ -438,7 +438,7 @@ static int mhi_ep_read_channel(struct mhi_ep_cntrl *mhi_cntrl, read_offset = mhi_chan->tre_size - mhi_chan->tre_bytes_left; write_offset = len - buf_left; - buf_addr = kmem_cache_zalloc(mhi_cntrl->tre_buf_cache, GFP_KERNEL | GFP_DMA); + buf_addr = kmem_cache_zalloc(mhi_cntrl->tre_buf_cache, GFP_KERNEL); if (!buf_addr) return -ENOMEM; @@ -1481,14 +1481,14 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl, mhi_cntrl->ev_ring_el_cache = kmem_cache_create("mhi_ep_event_ring_el", sizeof(struct mhi_ring_element), 0, - SLAB_CACHE_DMA, NULL); + 0, NULL); if (!mhi_cntrl->ev_ring_el_cache) { ret = -ENOMEM; goto err_free_cmd; } mhi_cntrl->tre_buf_cache = kmem_cache_create("mhi_ep_tre_buf", MHI_EP_DEFAULT_MTU, 0, - SLAB_CACHE_DMA, NULL); + 0, NULL); if (!mhi_cntrl->tre_buf_cache) { ret = -ENOMEM; goto err_destroy_ev_ring_el_cache; -- 2.25.1

9 months, 1 week

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2024