June 2024 - Linux-stable-mirror

[PATCH AUTOSEL 6.9 01/44] scsi: core: alua: I/O errors for ALUA state transitions

by Sasha Levin

From: Martin Wilck <martin.wilck(a)suse.com> [ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVE… Co-developed-by: Rajashekhar M A <rajs(a)netapp.com> Co-developed-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Martin Wilck <martin.wilck(a)suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Mike Christie <michael.christie(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index a226dc1b65d71..4eb0837298d4d 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state) } } -static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg; + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev) retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval) -- 2.43.0

4 months, 1 week

2
44
0 0

[PATCH AUTOSEL 6.6 01/35] scsi: core: alua: I/O errors for ALUA state transitions

by Sasha Levin

From: Martin Wilck <martin.wilck(a)suse.com> [ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVE… Co-developed-by: Rajashekhar M A <rajs(a)netapp.com> Co-developed-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Martin Wilck <martin.wilck(a)suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Mike Christie <michael.christie(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index a226dc1b65d71..4eb0837298d4d 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state) } } -static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg; + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev) retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval) -- 2.43.0

4 months, 1 week

1
34
0 0

[PATCH v4] media: venus: fix use after free in vdec_close

by Dikshita Agarwal

There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close. Cc: stable(a)vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Dikshita Agarwal <quic_dikshita(a)quicinc.com> --- Changes since v3: - Fixed style issue with fixes tag Changes since v2: - Fixed email id Changes since v1: - Added fixes and stable tags drivers/media/platform/qcom/venus/vdec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c index 29130a9..56f8a25 100644 --- a/drivers/media/platform/qcom/venus/vdec.c +++ b/drivers/media/platform/qcom/venus/vdec.c @@ -1747,6 +1747,7 @@ static int vdec_close(struct file *file) vdec_pm_get(inst); + cancel_work_sync(&inst->delayed_process_work); v4l2_m2m_ctx_release(inst->m2m_ctx); v4l2_m2m_release(inst->m2m_dev); vdec_ctrl_deinit(inst); -- 2.7.4

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: update add_addr counters after connect" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 40eec1795cc27b076d49236649a29507c7ed8c2d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061753-platinum-rented-6220@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 40eec1795cc2 ("mptcp: pm: update add_addr counters after connect") 6a09788c1a66 ("mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID") e571fb09c893 ("selftests: mptcp: add speed env var") 4aadde088a58 ("selftests: mptcp: add fullmesh env var") 080b7f5733fd ("selftests: mptcp: add fastclose env var") 662aa22d7dcd ("selftests: mptcp: set all env vars as local ones") 9e9d176df8e9 ("selftests: mptcp: add pm_nl_set_endpoint helper") 1534f87ee0dc ("selftests: mptcp: drop sflags parameter") 595ef566a2ef ("selftests: mptcp: drop addr_nr_ns1/2 parameters") 0c93af1f8907 ("selftests: mptcp: drop test_linkfail parameter") be7e9786c915 ("selftests: mptcp: set FAILING_LINKS in run_tests") 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") ae947bb2c253 ("selftests: mptcp: join: skip Fastclose tests if not supported") d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") 4a0b866a3f7d ("selftests: mptcp: join: skip test if iptables/tc cmds fail") 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") 6c160b636c91 ("selftests: mptcp: update userspace pm subflow tests") 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests") 8697a258ae24 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40eec1795cc27b076d49236649a29507c7ed8c2d Mon Sep 17 00:00:00 2001 From: YonglongLi <liyonglong(a)chinatelecom.cn> Date: Fri, 7 Jun 2024 17:01:50 +0200 Subject: [PATCH] mptcp: pm: update add_addr counters after connect The creation of new subflows can fail for different reasons. If no subflow have been created using the received ADD_ADDR, the related counters should not be updated, otherwise they will never be decremented for events related to this ID later on. For the moment, the number of accepted ADD_ADDR is only decremented upon the reception of a related RM_ADDR, and only if the remote address ID is currently being used by at least one subflow. In other words, if no subflow can be created with the received address, the counter will not be decremented. In this case, it is then important not to increment pm.add_addr_accepted counter, and not to modify pm.accept_addr bit. Note that this patch does not modify the behaviour in case of failures later on, e.g. if the MP Join is dropped or rejected. The "remove invalid addresses" MP Join subtest has been modified to validate this case. The broadcast IP address is added before the "valid" address that will be used to successfully create a subflow, and the limit is decreased by one: without this patch, it was not possible to create the last subflow, because: - the broadcast address would have been accepted even if it was not usable: the creation of a subflow to this address results in an error, - the limit of 2 accepted ADD_ADDR would have then been reached. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable(a)vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: YonglongLi <liyonglong(a)chinatelecom.cn> Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1a… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 766a8409fa67..ea9e5817b9e9 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -677,6 +677,7 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) unsigned int add_addr_accept_max; struct mptcp_addr_info remote; unsigned int subflows_max; + bool sf_created = false; int i, nr; add_addr_accept_max = mptcp_pm_get_add_addr_accept_max(msk); @@ -704,15 +705,18 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) if (nr == 0) return; - msk->pm.add_addr_accepted++; - if (msk->pm.add_addr_accepted >= add_addr_accept_max || - msk->pm.subflows >= subflows_max) - WRITE_ONCE(msk->pm.accept_addr, false); - spin_unlock_bh(&msk->pm.lock); for (i = 0; i < nr; i++) - __mptcp_subflow_connect(sk, &addrs[i], &remote); + if (__mptcp_subflow_connect(sk, &addrs[i], &remote) == 0) + sf_created = true; spin_lock_bh(&msk->pm.lock); + + if (sf_created) { + msk->pm.add_addr_accepted++; + if (msk->pm.add_addr_accepted >= add_addr_accept_max || + msk->pm.subflows >= subflows_max) + WRITE_ONCE(msk->pm.accept_addr, false); + } } void mptcp_pm_nl_addr_send_ack(struct mptcp_sock *msk) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index aea314d140c9..108aeeb84ef1 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2249,10 +2249,10 @@ remove_tests() if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 flags signal - pm_nl_set_limits $ns2 3 3 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 6a09788c1a66e3d8b04b3b3e7618cc817bb60ae9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061738-bright-knelt-4f2a@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 6a09788c1a66 ("mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID") 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") c157bbe776b7 ("mptcp: allow the in kernel PM to set MPC subflow priority") 843b5e75efff ("mptcp: fix local endpoint accounting") 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs") 0530020a7c8f ("mptcp: track and update contiguous data status") 0348c690ed37 ("mptcp: add the fallback check") 1761fed25678 ("mptcp: don't send RST for single subflow") c682bf536cf4 ("mptcp: add pm_nl_pernet helpers") ae7bd9ccecc3 ("selftests: mptcp: join: option to execute specific tests") e59300ce3ff8 ("selftests: mptcp: join: reset failing links") 3afd0280e7d3 ("selftests: mptcp: join: define tests groups once") 3c082695e78b ("selftests: mptcp: drop msg argument of chk_csum_nr") 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") 4cf86ae84c71 ("mptcp: strict local address ID selection") d045b9eb95a9 ("mptcp: introduce implicit endpoints") 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation") f98c2bca7b2b ("selftests: mptcp: Rename wait function") 826d7bdca833 ("selftests: mptcp: join: allow running -cCi") ea56dcb43c20 ("mptcp: use MPTCP_SUBFLOW_NODATA") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6a09788c1a66e3d8b04b3b3e7618cc817bb60ae9 Mon Sep 17 00:00:00 2001 From: YonglongLi <liyonglong(a)chinatelecom.cn> Date: Fri, 7 Jun 2024 17:01:49 +0200 Subject: [PATCH] mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID The RmAddr MIB counter is supposed to be incremented once when a valid RM_ADDR has been received. Before this patch, it could have been incremented as many times as the number of subflows connected to the linked address ID, so it could have been 0, 1 or more than 1. The "RmSubflow" is incremented after a local operation. In this case, it is normal to tied it with the number of subflows that have been actually removed. The "remove invalid addresses" MP Join subtest has been modified to validate this case. A broadcast IP address is now used instead: the client will not be able to create a subflow to this address. The consequence is that when receiving the RM_ADDR with the ID attached to this broadcast IP address, no subflow linked to this ID will be found. Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs") Cc: stable(a)vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: YonglongLi <liyonglong(a)chinatelecom.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1a… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 7f53e022e27e..766a8409fa67 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -814,10 +814,13 @@ static void mptcp_pm_nl_rm_addr_or_subflow(struct mptcp_sock *msk, spin_lock_bh(&msk->pm.lock); removed = true; - __MPTCP_INC_STATS(sock_net(sk), rm_type); + if (rm_type == MPTCP_MIB_RMSUBFLOW) + __MPTCP_INC_STATS(sock_net(sk), rm_type); } if (rm_type == MPTCP_MIB_RMSUBFLOW) __set_bit(rm_id ? rm_id : msk->mpc_endpoint_id, msk->pm.id_avail_bitmap); + else if (rm_type == MPTCP_MIB_RMADDR) + __MPTCP_INC_STATS(sock_net(sk), rm_type); if (!removed) continue; diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 2b66c5fa71eb..aea314d140c9 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2250,7 +2250,8 @@ remove_tests() pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + # broadcast IP: no packet for this address will be received on ns1 + pm_nl_add_endpoint $ns1 224.0.0.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1

4 months, 1 week

2
1
0 0

[PATCH v5 1/1] usb: dwc3: core: Workaround for CSR read timeout

by joswang

From: Jos Wang <joswang(a)lenovo.com> This is a workaround for STAR 4846132, which only affects DWC_usb31 version2.00a operating in host mode. There is a problem in DWC_usb31 version 2.00a operating in host mode that would cause a CSR read timeout When CSR read coincides with RAM Clock Gating Entry. By disable Clock Gating, sacrificing power consumption for normal operation. Cc: stable(a)vger.kernel.org Signed-off-by: Jos Wang <joswang(a)lenovo.com> --- v4 -> v5: no change v3 -> v4: modify commit message, add Cc: stable(a)vger.kernel.org v2 -> v3: - code refactor - modify comment, add STAR number, workaround applied in host mode - modify commit message, add STAR number, workaround applied in host mode - modify Author Jos Wang v1 -> v2: no change drivers/usb/dwc3/core.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3a8fbc2d6b99..61f858f64e5a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -960,12 +960,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) static void dwc3_core_setup_global_control(struct dwc3 *dwc) { + unsigned int power_opt; + unsigned int hw_mode; u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1); - switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { + switch (power_opt) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: /** * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an @@ -998,6 +1002,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) break; } + /* + * This is a workaround for STAR#4846132, which only affects + * DWC_usb31 version2.00a operating in host mode. + * + * There is a problem in DWC_usb31 version 2.00a operating + * in host mode that would cause a CSR read timeout When CSR + * read coincides with RAM Clock Gating Entry. By disable + * Clock Gating, sacrificing power consumption for normal + * operation. + */ + if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO && + hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A)) + reg |= DWC3_GCTL_DSBLCLKGTNG; + /* check if current dwc3 is on simulation board */ if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { dev_info(dwc->dev, "Running with FPGA optimizations\n"); -- 2.17.1

4 months, 1 week

1
0
0 0

[PATCH] net: usb: ax88179_178a: improve link status logs

by Jose Ignacio Tornos Martinez

Avoid spurious link status logs that may ultimately be wrong; for example, if the link is set to down with the cable plugged, then the cable is unplugged and afer this the link is set to up, the last new log that is appearing is incorrectly telling that the link is up. In order to aovid errors, show link status logs after link_reset processing, and in order to avoid spurious as much as possible, only show the link loss when some link status change is detected. cc: stable(a)vger.kernel.org Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> --- drivers/net/usb/ax88179_178a.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index c2fb736f78b2..60357796be99 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -326,7 +326,8 @@ static void ax88179_status(struct usbnet *dev, struct urb *urb) if (netif_carrier_ok(dev->net) != link) { usbnet_link_change(dev, link, 1); - netdev_info(dev->net, "ax88179 - Link status is: %d\n", link); + if (!link) + netdev_info(dev->net, "ax88179 - Link status is: %d\n", link); } } @@ -1542,6 +1543,7 @@ static int ax88179_link_reset(struct usbnet *dev) GMII_PHY_PHYSR, 2, &tmp16); if (!(tmp16 & GMII_PHY_PHYSR_LINK)) { + netdev_info(dev->net, "ax88179 - Link status is: 0\n"); return 0; } else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) { mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ; @@ -1579,6 +1581,8 @@ static int ax88179_link_reset(struct usbnet *dev) netif_carrier_on(dev->net); + netdev_info(dev->net, "ax88179 - Link status is: 1\n"); + return 0; } -- 2.45.1

4 months, 1 week

2
3
0 0

FAILED: patch "[PATCH] mptcp: pm: update add_addr counters after connect" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 40eec1795cc27b076d49236649a29507c7ed8c2d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061752-crowbar-granddad-34da@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 40eec1795cc2 ("mptcp: pm: update add_addr counters after connect") 6a09788c1a66 ("mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID") e571fb09c893 ("selftests: mptcp: add speed env var") 4aadde088a58 ("selftests: mptcp: add fullmesh env var") 080b7f5733fd ("selftests: mptcp: add fastclose env var") 662aa22d7dcd ("selftests: mptcp: set all env vars as local ones") 9e9d176df8e9 ("selftests: mptcp: add pm_nl_set_endpoint helper") 1534f87ee0dc ("selftests: mptcp: drop sflags parameter") 595ef566a2ef ("selftests: mptcp: drop addr_nr_ns1/2 parameters") 0c93af1f8907 ("selftests: mptcp: drop test_linkfail parameter") be7e9786c915 ("selftests: mptcp: set FAILING_LINKS in run_tests") 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") ae947bb2c253 ("selftests: mptcp: join: skip Fastclose tests if not supported") d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") 4a0b866a3f7d ("selftests: mptcp: join: skip test if iptables/tc cmds fail") 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") 6c160b636c91 ("selftests: mptcp: update userspace pm subflow tests") 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests") 8697a258ae24 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40eec1795cc27b076d49236649a29507c7ed8c2d Mon Sep 17 00:00:00 2001 From: YonglongLi <liyonglong(a)chinatelecom.cn> Date: Fri, 7 Jun 2024 17:01:50 +0200 Subject: [PATCH] mptcp: pm: update add_addr counters after connect The creation of new subflows can fail for different reasons. If no subflow have been created using the received ADD_ADDR, the related counters should not be updated, otherwise they will never be decremented for events related to this ID later on. For the moment, the number of accepted ADD_ADDR is only decremented upon the reception of a related RM_ADDR, and only if the remote address ID is currently being used by at least one subflow. In other words, if no subflow can be created with the received address, the counter will not be decremented. In this case, it is then important not to increment pm.add_addr_accepted counter, and not to modify pm.accept_addr bit. Note that this patch does not modify the behaviour in case of failures later on, e.g. if the MP Join is dropped or rejected. The "remove invalid addresses" MP Join subtest has been modified to validate this case. The broadcast IP address is added before the "valid" address that will be used to successfully create a subflow, and the limit is decreased by one: without this patch, it was not possible to create the last subflow, because: - the broadcast address would have been accepted even if it was not usable: the creation of a subflow to this address results in an error, - the limit of 2 accepted ADD_ADDR would have then been reached. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable(a)vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: YonglongLi <liyonglong(a)chinatelecom.cn> Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1a… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 766a8409fa67..ea9e5817b9e9 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -677,6 +677,7 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) unsigned int add_addr_accept_max; struct mptcp_addr_info remote; unsigned int subflows_max; + bool sf_created = false; int i, nr; add_addr_accept_max = mptcp_pm_get_add_addr_accept_max(msk); @@ -704,15 +705,18 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) if (nr == 0) return; - msk->pm.add_addr_accepted++; - if (msk->pm.add_addr_accepted >= add_addr_accept_max || - msk->pm.subflows >= subflows_max) - WRITE_ONCE(msk->pm.accept_addr, false); - spin_unlock_bh(&msk->pm.lock); for (i = 0; i < nr; i++) - __mptcp_subflow_connect(sk, &addrs[i], &remote); + if (__mptcp_subflow_connect(sk, &addrs[i], &remote) == 0) + sf_created = true; spin_lock_bh(&msk->pm.lock); + + if (sf_created) { + msk->pm.add_addr_accepted++; + if (msk->pm.add_addr_accepted >= add_addr_accept_max || + msk->pm.subflows >= subflows_max) + WRITE_ONCE(msk->pm.accept_addr, false); + } } void mptcp_pm_nl_addr_send_ack(struct mptcp_sock *msk) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index aea314d140c9..108aeeb84ef1 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2249,10 +2249,10 @@ remove_tests() if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 flags signal - pm_nl_set_limits $ns2 3 3 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1

4 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 6a09788c1a66e3d8b04b3b3e7618cc817bb60ae9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061737-stove-fence-8c34@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 6a09788c1a66 ("mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID") 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") c157bbe776b7 ("mptcp: allow the in kernel PM to set MPC subflow priority") 843b5e75efff ("mptcp: fix local endpoint accounting") 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs") 0530020a7c8f ("mptcp: track and update contiguous data status") 0348c690ed37 ("mptcp: add the fallback check") 1761fed25678 ("mptcp: don't send RST for single subflow") c682bf536cf4 ("mptcp: add pm_nl_pernet helpers") ae7bd9ccecc3 ("selftests: mptcp: join: option to execute specific tests") e59300ce3ff8 ("selftests: mptcp: join: reset failing links") 3afd0280e7d3 ("selftests: mptcp: join: define tests groups once") 3c082695e78b ("selftests: mptcp: drop msg argument of chk_csum_nr") 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") 4cf86ae84c71 ("mptcp: strict local address ID selection") d045b9eb95a9 ("mptcp: introduce implicit endpoints") 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation") f98c2bca7b2b ("selftests: mptcp: Rename wait function") 826d7bdca833 ("selftests: mptcp: join: allow running -cCi") ea56dcb43c20 ("mptcp: use MPTCP_SUBFLOW_NODATA") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6a09788c1a66e3d8b04b3b3e7618cc817bb60ae9 Mon Sep 17 00:00:00 2001 From: YonglongLi <liyonglong(a)chinatelecom.cn> Date: Fri, 7 Jun 2024 17:01:49 +0200 Subject: [PATCH] mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID The RmAddr MIB counter is supposed to be incremented once when a valid RM_ADDR has been received. Before this patch, it could have been incremented as many times as the number of subflows connected to the linked address ID, so it could have been 0, 1 or more than 1. The "RmSubflow" is incremented after a local operation. In this case, it is normal to tied it with the number of subflows that have been actually removed. The "remove invalid addresses" MP Join subtest has been modified to validate this case. A broadcast IP address is now used instead: the client will not be able to create a subflow to this address. The consequence is that when receiving the RM_ADDR with the ID attached to this broadcast IP address, no subflow linked to this ID will be found. Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs") Cc: stable(a)vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: YonglongLi <liyonglong(a)chinatelecom.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1a… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 7f53e022e27e..766a8409fa67 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -814,10 +814,13 @@ static void mptcp_pm_nl_rm_addr_or_subflow(struct mptcp_sock *msk, spin_lock_bh(&msk->pm.lock); removed = true; - __MPTCP_INC_STATS(sock_net(sk), rm_type); + if (rm_type == MPTCP_MIB_RMSUBFLOW) + __MPTCP_INC_STATS(sock_net(sk), rm_type); } if (rm_type == MPTCP_MIB_RMSUBFLOW) __set_bit(rm_id ? rm_id : msk->mpc_endpoint_id, msk->pm.id_avail_bitmap); + else if (rm_type == MPTCP_MIB_RMADDR) + __MPTCP_INC_STATS(sock_net(sk), rm_type); if (!removed) continue; diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 2b66c5fa71eb..aea314d140c9 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2250,7 +2250,8 @@ remove_tests() pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + # broadcast IP: no packet for this address will be received on ns1 + pm_nl_add_endpoint $ns1 224.0.0.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1

4 months, 1 week

2
1
0 0

Re: Bluetooth kernel BUG with Intel AX211 (regression in 6.1.83)

by Linux regression tracking (Thorsten Leemhuis)

Hi stable team (and Bluetooth maintainers), I noticed a regression report about a BT problem in 6.1.y: On 21.04.24 15:54, Jeremy Lainé wrote: > > After upgrading my kernel to Debian's latest version (6.1.85), I > started encountering systematic kernel BUGs at boot, making the > bluetooth stack unusable. I initially reported this to Debian's bug > tracker: > > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1069301 > > .. but have since confirmed that this is reproducible with vanilla > kernels, including the latest 6.1.y version (6.1.87). > > I tried various kernel versions (straight from kernel.org) to pinpoint > when the problem started occurring and the resultats are: Jeremy later wrote: > # first bad commit: [6083089ab00631617f9eac678df3ab050a9d837a] > Bluetooth: hci_conn: Consolidate code for aborting connections https://lore.kernel.org/all/8eeb980a-f04a-4e94-8065-25566cfef4dd@molgen.mpg… That's a13f316e90fdb1 ("Bluetooth: hci_conn: Consolidate code for aborting connections") [v6.6-rc1, v6.1.83 (6083089ab00631)] FWIW, there is a fix for the mainline commit under review: https://lore.kernel.org/all/20240411151929.403263-1-kovalev@altlinux.org/ But it is likely unrelated, as Jeremy later also wrote: > I'm now running 6.9-rc5 and have not been able to reproduce the issue, https://lore.kernel.org/all/CADRbXaA2yFjMo=_8_ZTubPbrrmWH9yx+aG5pUadnk395ko… Makes me wonder if 6.1.y is missing some other change a13f316e90fdb1 depends on. Ciao, Thorsten > I have included a trace below, and full system details are available > in the Debian bug listed above. Can you suggest any other tests I can > perform to help diagnose the origin of the problem? > > [ 22.660847] list_del corruption, ffff94d9f6302000->prev is > LIST_POISON2 (dead000000000122) > [ 22.660887] ------------[ cut here ]------------ > [ 22.660890] kernel BUG at lib/list_debug.c:56! > [ 22.660907] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI > [ 22.660917] CPU: 10 PID: 139 Comm: kworker/u25:0 Not tainted > 6.1.0-20-amd64 #1 Debian 6.1.85-1 > [ 22.660929] Hardware name: Dell Inc. XPS 9315/00KRKP, BIOS 1.19.1 03/14/2024 > [ 22.660936] Workqueue: hci0 hci_cmd_sync_work [bluetooth] > [ 22.661128] RIP: 0010:__list_del_entry_valid.cold+0x4b/0x6f > [ 22.661147] Code: fe ff 0f 0b 48 89 f2 48 89 fe 48 c7 c7 48 18 7a > 9f e8 14 a1 fe ff 0f 0b 48 89 fe 48 89 ca 48 c7 c7 10 18 7a 9f e8 00 > a1 fe ff <0f> 0b 48 89 fe 48 c7 c7 d8 17 7a 9f e8 ef a0 fe ff 0f 0b 48 > 89 fe > [ 22.661156] RSP: 0000:ffffae0e406efde0 EFLAGS: 00010246 > [ 22.661164] RAX: 000000000000004e RBX: ffff94d9f6302000 RCX: 0000000000000027 > [ 22.661172] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff94dfaf8a03a0 > [ 22.661177] RBP: ffff94d859392000 R08: 0000000000000000 R09: ffffae0e406efc78 > [ 22.661182] R10: 0000000000000003 R11: ffffffff9fed4448 R12: ffff94d859392000 > [ 22.661187] R13: ffff94d859392770 R14: ffff94d858cb9800 R15: dead000000000100 > [ 22.661194] FS: 0000000000000000(0000) GS:ffff94dfaf880000(0000) > knlGS:0000000000000000 > [ 22.661202] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 22.661208] CR2: 00007f423c024038 CR3: 0000000799c04000 CR4: 0000000000750ee0 > [ 22.661214] PKRU: 55555554 > [ 22.661218] Call Trace: > [ 22.661225] <TASK> > [ 22.661232] ? __die_body.cold+0x1a/0x1f > [ 22.661246] ? die+0x2a/0x50 > [ 22.661257] ? do_trap+0xc5/0x110 > [ 22.661268] ? __list_del_entry_valid.cold+0x4b/0x6f > [ 22.661279] ? do_error_trap+0x6a/0x90 > [ 22.661289] ? __list_del_entry_valid.cold+0x4b/0x6f > [ 22.661298] ? exc_invalid_op+0x4c/0x60 > [ 22.661307] ? __list_del_entry_valid.cold+0x4b/0x6f > [ 22.661316] ? asm_exc_invalid_op+0x16/0x20 > [ 22.661328] ? __list_del_entry_valid.cold+0x4b/0x6f > [ 22.661337] hci_conn_del+0x136/0x3e0 [bluetooth] > [ 22.661466] hci_abort_conn_sync+0xaa/0x230 [bluetooth] > [ 22.661632] ? abort_conn_sync+0x3d/0x70 [bluetooth] > [ 22.661751] hci_cmd_sync_work+0x9f/0x150 [bluetooth] > [ 22.661915] process_one_work+0x1c4/0x380 > [ 22.661929] worker_thread+0x4d/0x380 > [ 22.661940] ? rescuer_thread+0x3a0/0x3a0 > [ 22.661950] kthread+0xd7/0x100 > [ 22.661959] ? kthread_complete_and_exit+0x20/0x20 > [ 22.661969] ret_from_fork+0x1f/0x30 > [ 22.661984] </TASK> > [ 22.661987] Modules linked in: ctr ccm nft_chain_nat xt_MASQUERADE > nf_nat nf_conntrack_netlink br_netfilter bridge stp llc xfrm_user > xfrm_algo nvme_fabrics rfcomm snd_seq_dummy snd_hrtimer snd_seq > snd_seq_device cmac algif_hash algif_skcipher af_alg snd_ctl_led > snd_soc_sof_sdw snd_soc_intel_hda_dsp_common snd_sof_probes > snd_soc_intel_sof_maxim_common snd_soc_rt715_sdca snd_soc_rt1316_sdw > regmap_sdw_mbq snd_hda_codec_hdmi regmap_sdw overlay ip6t_REJECT > nf_reject_ipv6 xt_hl ip6_tables ip6t_rt ipt_REJECT nf_reject_ipv4 > xt_LOG qrtr nf_log_syslog nft_limit bnep ipmi_devintf ipmi_msghandler > xt_limit xt_addrtype xt_tcpudp xt_conntrack nf_conntrack > nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables libcrc32c nfnetlink > binfmt_misc nls_ascii nls_cp437 vfat fat x86_pkg_temp_thermal > intel_powerclamp coretemp snd_soc_dmic snd_sof_pci_intel_tgl > snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation > soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp > snd_sof snd_sof_utils > [ 22.662122] snd_soc_hdac_hda snd_hda_ext_core > snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core kvm_intel > snd_compress btusb soundwire_bus btrtl kvm btbcm snd_hda_intel btintel > snd_intel_dspcfg btmtk dell_laptop snd_intel_sdw_acpi irqbypass > ledtrig_audio bluetooth snd_hda_codec i915 snd_hda_core rapl mei_hdcp > intel_rapl_msr snd_hwdep processor_thermal_device_pci dell_wmi joydev > hid_sensor_als intel_cstate jitterentropy_rng processor_thermal_device > snd_pcm hid_sensor_trigger processor_thermal_rfim dell_smbios > ucsi_acpi dcdbas hid_sensor_iio_common processor_thermal_mbox > drm_buddy intel_uncore iwlmvm pcspkr drbg iTCO_wdt typec_ucsi > dell_wmi_sysman snd_timer industrialio_triggered_buffer > drm_display_helper processor_thermal_rapl mei_me dell_wmi_descriptor > firmware_attributes_class kfifo_buf wmi_bmof ansi_cprng intel_pmc_bxt > cec snd roles intel_rapl_common ecdh_generic iTCO_vendor_support > int3403_thermal watchdog ecc industrialio mei soundcore typec > int3400_thermal rc_core mac80211 > [ 22.662253] int340x_thermal_zone intel_pmc_core button intel_hid > acpi_thermal_rel sparse_keymap ttm acpi_pad acpi_tad drm_kms_helper > libarc4 igen6_edac i2c_algo_bit ac evdev hid_multitouch serio_raw > iwlwifi cfg80211 rfkill msr parport_pc ppdev lp drm parport fuse loop > efi_pstore configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 > mbcache jbd2 crc32c_generic usbhid hid_sensor_custom hid_sensor_hub > dm_crypt dm_mod intel_ishtp_hid nvme nvme_core t10_pi > crc64_rocksoft_generic crc64_rocksoft crc_t10dif crct10dif_generic > crc64 ahci libahci crct10dif_pclmul crct10dif_common libata > crc32_pclmul crc32c_intel scsi_mod spi_pxa2xx_platform > ghash_clmulni_intel dw_dmac hid_generic sha512_ssse3 scsi_common > dw_dmac_core xhci_pci sha512_generic sha256_ssse3 xhci_hcd sha1_ssse3 > usbcore i2c_hid_acpi intel_lpss_pci aesni_intel video intel_ish_ipc > i2c_i801 i2c_hid intel_lpss psmouse thunderbolt crypto_simd cryptd > i2c_smbus vmd intel_ishtp usb_common idma64 hid battery wmi > [ 22.662422] ---[ end trace 0000000000000000 ]--- > > Cheers, > > Jeremy #regzbot ^introduced 6083089ab0063 #regzbot title Bluetooth kernel BUG with Intel AX211 #regzbot duplicate: https://lore.kernel.org/all/8eeb980a-f04a-4e94-8065-25566cfef4dd@molgen.mpg… #regzbot ignore-activit

4 months, 1 week

5
9
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2024