July 2024 - Linux-stable-mirror

[PATCH 6.10 1/2] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables

by Erpeng Xu

From: Hilda Wu <hildawu(a)realtek.com> commit 295ef07a9dae6182ad4b689aa8c6a7dbba21474c upstream Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu(a)realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Erpeng Xu <xuerpeng(a)uniontech.com> --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index e384ef6ff050..aec6da3e37ef 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -555,6 +555,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852BT/8852BE-VT Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | -- 2.45.2

7 months, 2 weeks

1
0
0 0

[PATCH] [DEBUG] md/raid1: check recovery_offset in raid1_check_read_range

by Mateusz Jończyk

This should fix the filesystem corruption during RAID resync. Checking this condition in raid1_check_read_range is not ideal, but this is only a debug patch. Link: https://lore.kernel.org/lkml/20240724141906.10b4fc4e@peluse-desk5/T/#m671d6… Signed-off-by: Mateusz Jończyk <mat.jonczyk(a)o2.pl> Cc: Yu Kuai <yukuai3(a)huawei.com> Cc: Song Liu <song(a)kernel.org> Cc: stable(a)vger.kernel.org --- drivers/md/raid1-10.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/raid1-10.c b/drivers/md/raid1-10.c index 2ea1710a3b70..4ab896e8cb12 100644 --- a/drivers/md/raid1-10.c +++ b/drivers/md/raid1-10.c @@ -252,6 +252,10 @@ static inline int raid1_check_read_range(struct md_rdev *rdev, sector_t first_bad; int bad_sectors; + if (!test_bit(In_sync, &rdev->flags) && + rdev->recovery_offset < this_sector + *len) + return 0; + /* no bad block overlap */ if (!is_badblock(rdev, this_sector, *len, &first_bad, &bad_sectors)) return *len; -- 2.25.1

7 months, 2 weeks

2
1
0 0

[PATCH v2 0/2] ALSA: firewire-lib: restore process context workqueue to prevent deadlock

by Edmund Raile

This patchset serves to prevent a deadlock between process context and softIRQ context: A. In the process context * (lock A) Acquiring spin_lock by snd_pcm_stream_lock_irq() in snd_pcm_status64() * (lock B) Then attempt to enter tasklet B. In the softIRQ context * (lock B) Enter tasklet * (lock A) Attempt to acquire spin_lock by snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed() ? tasklet_unlock_spin_wait </NMI> <TASK> ohci_flush_iso_completions firewire_ohci amdtp_domain_stream_pcm_pointer snd_firewire_lib snd_pcm_update_hw_ptr0 snd_pcm snd_pcm_status64 snd_pcm ? native_queued_spin_lock_slowpath </NMI> <IRQ> _raw_spin_lock_irqsave snd_pcm_period_elapsed snd_pcm process_rx_packets snd_firewire_lib irq_target_callback snd_firewire_lib handle_it_packet firewire_ohci context_tasklet firewire_ohci The issue has been reported as a regression of kernel 5.14: Link: https://lore.kernel.org/regressions/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg7… ("[REGRESSION] ALSA: firewire-lib: snd_pcm_period_elapsed deadlock with Fireface 800") Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context") removed the process context workqueue from amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove its overhead. Commit b5b519965c4c ("ALSA: firewire-lib: obsolete workqueue for period update") belongs to the same patch series and removed the now-unused workqueue entirely. Though being observed on RME Fireface 800, this issue would affect all Firewire audio interfaces using ohci amdtp + pcm streaming. ALSA streaming, especially under intensive CPU load will reveal this issue the soonest due to issuing more hardIRQs, with time to occurrence ranging from 2 secons to 30 minutes after starting playback. to reproduce the issue: direct ALSA playback to the device: mpv --audio-device=alsa/sysdefault:CARD=Fireface800 Spor-Ignition.flac Time to occurrence: 2s to 30m Likelihood increased by: - high CPU load stress --cpu $(nproc) - switching between applications via workspaces tested with i915 in Xfce PulsaAudio / PipeWire conceal the issue as they run PCM substream without period wakeup mode, issuing less hardIRQs. Backport note: Also applies to and fixes on (tested): 6.10.2, 6.9.12, 6.6.43, 6.1.102, 5.15.164 Edmund Raile (2): ALSA: firewire-lib: restore workqueue for process context ALSA: firewire-lib: prevent deadlock between process and softIRQ context sound/firewire/amdtp-stream.c | 36 ++++++++++++++++++++++------------- sound/firewire/amdtp-stream.h | 1 + 2 files changed, 24 insertions(+), 13 deletions(-) -- 2.45.2

7 months, 2 weeks

2
3
0 0

+ mm-vmalloc-combine-all-tlb-flush-operations-of-kasan-shadow-virtual-address-into-one-operation.patch added to mm-unstable branch

by Andrew Morton

The patch titled Subject: mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation has been added to the -mm mm-unstable branch. Its filename is mm-vmalloc-combine-all-tlb-flush-operations-of-kasan-shadow-virtual-address-into-one-operation.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Adrian Huang <ahuang12(a)lenovo.com> Subject: mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation Date: Sat, 27 Jul 2024 00:52:46 +0800 When compiling kernel source 'make -j $(nproc)' with the up-and-running KASAN-enabled kernel on a 256-core machine, the following soft lockup is shown: watchdog: BUG: soft lockup - CPU#28 stuck for 22s! [kworker/28:1:1760] CPU: 28 PID: 1760 Comm: kworker/28:1 Kdump: loaded Not tainted 6.10.0-rc5 #95 Workqueue: events drain_vmap_area_work RIP: 0010:smp_call_function_many_cond+0x1d8/0xbb0 Code: 38 c8 7c 08 84 c9 0f 85 49 08 00 00 8b 45 08 a8 01 74 2e 48 89 f1 49 89 f7 48 c1 e9 03 41 83 e7 07 4c 01 e9 41 83 c7 03 f3 90 <0f> b6 01 41 38 c7 7c 08 84 c0 0f 85 d4 06 00 00 8b 45 08 a8 01 75 RSP: 0018:ffffc9000cb3fb60 EFLAGS: 00000202 RAX: 0000000000000011 RBX: ffff8883bc4469c0 RCX: ffffed10776e9949 RDX: 0000000000000002 RSI: ffff8883bb74ca48 RDI: ffffffff8434dc50 RBP: ffff8883bb74ca40 R08: ffff888103585dc0 R09: ffff8884533a1800 R10: 0000000000000004 R11: ffffffffffffffff R12: ffffed1077888d39 R13: dffffc0000000000 R14: ffffed1077888d38 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8883bc400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005577b5c8d158 CR3: 0000000004850000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? watchdog_timer_fn+0x2cd/0x390 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x300/0x6d0 ? sched_clock_cpu+0x69/0x4e0 ? __pfx___hrtimer_run_queues+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? ktime_get_update_offsets_now+0x7f/0x2a0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? hrtimer_interrupt+0x2ca/0x760 ? __sysvec_apic_timer_interrupt+0x8c/0x2b0 ? sysvec_apic_timer_interrupt+0x6a/0x90 </IRQ> <TASK> ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? smp_call_function_many_cond+0x1d8/0xbb0 ? __pfx_do_kernel_range_flush+0x10/0x10 on_each_cpu_cond_mask+0x20/0x40 flush_tlb_kernel_range+0x19b/0x250 ? srso_return_thunk+0x5/0x5f ? kasan_release_vmalloc+0xa7/0xc0 purge_vmap_node+0x357/0x820 ? __pfx_purge_vmap_node+0x10/0x10 __purge_vmap_area_lazy+0x5b8/0xa10 drain_vmap_area_work+0x21/0x30 process_one_work+0x661/0x10b0 worker_thread+0x844/0x10e0 ? srso_return_thunk+0x5/0x5f ? __kthread_parkme+0x82/0x140 ? __pfx_worker_thread+0x10/0x10 kthread+0x2a5/0x370 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Debugging Analysis: 1. The following ftrace log shows that the lockup CPU spends too much time iterating vmap_nodes and flushing TLB when purging vm_area structures. (Some info is trimmed). kworker: funcgraph_entry: | drain_vmap_area_work() { kworker: funcgraph_entry: | mutex_lock() { kworker: funcgraph_entry: 1.092 us | __cond_resched(); kworker: funcgraph_exit: 3.306 us | } ... ... kworker: funcgraph_entry: | flush_tlb_kernel_range() { ... ... kworker: funcgraph_exit: # 7533.649 us | } ... ... kworker: funcgraph_entry: 2.344 us | mutex_unlock(); kworker: funcgraph_exit: $ 23871554 us | } The drain_vmap_area_work() spends over 23 seconds. There are 2805 flush_tlb_kernel_range() calls in the ftrace log. * One is called in __purge_vmap_area_lazy(). * Others are called by purge_vmap_node->kasan_release_vmalloc. purge_vmap_node() iteratively releases kasan vmalloc allocations and flushes TLB for each vmap_area. - [Rough calculation] Each flush_tlb_kernel_range() runs about 7.5ms. -- 2804 * 7.5ms = 21.03 seconds. -- That's why a soft lock is triggered. 2. Extending the soft lockup time can work around the issue (For example, # echo 60 > /proc/sys/kernel/watchdog_thresh). This confirms the above-mentioned speculation: drain_vmap_area_work() spends too much time. If we combine all TLB flush operations of the KASAN shadow virtual address into one operation in the call path 'purge_vmap_node()->kasan_release_vmalloc()', the running time of drain_vmap_area_work() can be saved greatly. The idea is from the flush_tlb_kernel_range() call in __purge_vmap_area_lazy(). And, the soft lockup won't not be triggered. Here is the test result based on 6.10: [6.10 wo/ the patch] 1. ftrace latency profiling (record a trace if the latency > 20s). echo 20000000 > /sys/kernel/debug/tracing/tracing_thresh echo drain_vmap_area_work > /sys/kernel/debug/tracing/set_graph_function echo function_graph > /sys/kernel/debug/tracing/current_tracer echo 1 > /sys/kernel/debug/tracing/tracing_on 2. Run `make -j $(nproc)` to compile the kernel source 3. Once the soft lockup is reproduced, check the ftrace log: cat /sys/kernel/debug/tracing/trace # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 76) $ 50412985 us | } /* __purge_vmap_area_lazy */ 76) $ 50412997 us | } /* drain_vmap_area_work */ 76) $ 29165911 us | } /* __purge_vmap_area_lazy */ 76) $ 29165926 us | } /* drain_vmap_area_work */ 91) $ 53629423 us | } /* __purge_vmap_area_lazy */ 91) $ 53629434 us | } /* drain_vmap_area_work */ 91) $ 28121014 us | } /* __purge_vmap_area_lazy */ 91) $ 28121026 us | } /* drain_vmap_area_work */ [6.10 w/ the patch] 1. Repeat step 1-2 in "[6.10 wo/ the patch]" 2. The soft lockup is not triggered and ftrace log is empty. cat /sys/kernel/debug/tracing/trace # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 3. Setting 'tracing_thresh' to 10/5 seconds does not get any ftrace log. 4. Setting 'tracing_thresh' to 1 second gets ftrace log. cat /sys/kernel/debug/tracing/trace # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 23) $ 1074942 us | } /* __purge_vmap_area_lazy */ 23) $ 1074950 us | } /* drain_vmap_area_work */ The worst execution time of drain_vmap_area_work() is about 1 second. Link: https://lore.kernel.org/lkml/ZqFlawuVnOMY2k3E@pc638.lan/ Link: https://lkml.kernel.org/r/20240726165246.31326-1-ahuang12@lenovo.com Fixes: 282631cb2447 ("mm: vmalloc: remove global purge_vmap_area_root rb-tree") Signed-off-by: Adrian Huang <ahuang12(a)lenovo.com> Co-developed-by: Uladzislau Rezki (Sony) <urezki(a)gmail.com> Signed-off-by: Uladzislau Rezki (Sony) <urezki(a)gmail.com> Tested-by: Jiwei Sun <sunjw10(a)lenovo.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Konovalov <andreyknvl(a)gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a(a)gmail.com> Cc: Baoquan He <bhe(a)redhat.com> Cc: Christoph Hellwig <hch(a)infradead.org> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- include/linux/kasan.h | 12 +++++++++--- mm/kasan/shadow.c | 14 ++++++++++---- mm/vmalloc.c | 34 ++++++++++++++++++++++++++-------- 3 files changed, 45 insertions(+), 15 deletions(-) --- a/include/linux/kasan.h~mm-vmalloc-combine-all-tlb-flush-operations-of-kasan-shadow-virtual-address-into-one-operation +++ a/include/linux/kasan.h @@ -29,6 +29,9 @@ typedef unsigned int __bitwise kasan_vma #define KASAN_VMALLOC_VM_ALLOC ((__force kasan_vmalloc_flags_t)0x02u) #define KASAN_VMALLOC_PROT_NORMAL ((__force kasan_vmalloc_flags_t)0x04u) +#define KASAN_VMALLOC_PAGE_RANGE 0x1 /* Apply exsiting page range */ +#define KASAN_VMALLOC_TLB_FLUSH 0x2 /* TLB flush */ + #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) #include <linux/pgtable.h> @@ -531,7 +534,8 @@ void kasan_populate_early_vm_area_shadow int kasan_populate_vmalloc(unsigned long addr, unsigned long size); void kasan_release_vmalloc(unsigned long start, unsigned long end, unsigned long free_region_start, - unsigned long free_region_end); + unsigned long free_region_end, + unsigned long flags); #else /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */ @@ -546,7 +550,8 @@ static inline int kasan_populate_vmalloc static inline void kasan_release_vmalloc(unsigned long start, unsigned long end, unsigned long free_region_start, - unsigned long free_region_end) { } + unsigned long free_region_end, + unsigned long flags) { } #endif /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */ @@ -581,7 +586,8 @@ static inline int kasan_populate_vmalloc static inline void kasan_release_vmalloc(unsigned long start, unsigned long end, unsigned long free_region_start, - unsigned long free_region_end) { } + unsigned long free_region_end, + unsigned long flags) { } static inline void *kasan_unpoison_vmalloc(const void *start, unsigned long size, --- a/mm/kasan/shadow.c~mm-vmalloc-combine-all-tlb-flush-operations-of-kasan-shadow-virtual-address-into-one-operation +++ a/mm/kasan/shadow.c @@ -489,7 +489,8 @@ static int kasan_depopulate_vmalloc_pte( */ void kasan_release_vmalloc(unsigned long start, unsigned long end, unsigned long free_region_start, - unsigned long free_region_end) + unsigned long free_region_end, + unsigned long flags) { void *shadow_start, *shadow_end; unsigned long region_start, region_end; @@ -522,12 +523,17 @@ void kasan_release_vmalloc(unsigned long __memset(shadow_start, KASAN_SHADOW_INIT, shadow_end - shadow_start); return; } - apply_to_existing_page_range(&init_mm, + + + if (flags & KASAN_VMALLOC_PAGE_RANGE) + apply_to_existing_page_range(&init_mm, (unsigned long)shadow_start, size, kasan_depopulate_vmalloc_pte, NULL); - flush_tlb_kernel_range((unsigned long)shadow_start, - (unsigned long)shadow_end); + + if (flags & KASAN_VMALLOC_TLB_FLUSH) + flush_tlb_kernel_range((unsigned long)shadow_start, + (unsigned long)shadow_end); } } --- a/mm/vmalloc.c~mm-vmalloc-combine-all-tlb-flush-operations-of-kasan-shadow-virtual-address-into-one-operation +++ a/mm/vmalloc.c @@ -2187,6 +2187,25 @@ decay_va_pool_node(struct vmap_node *vn, reclaim_list_global(&decay_list); } +static void +kasan_release_vmalloc_node(struct vmap_node *vn) +{ + struct vmap_area *va; + unsigned long start, end; + + start = list_first_entry(&vn->purge_list, struct vmap_area, list)->va_start; + end = list_last_entry(&vn->purge_list, struct vmap_area, list)->va_end; + + list_for_each_entry(va, &vn->purge_list, list) { + if (is_vmalloc_or_module_addr((void *) va->va_start)) + kasan_release_vmalloc(va->va_start, va->va_end, + va->va_start, va->va_end, + KASAN_VMALLOC_PAGE_RANGE); + } + + kasan_release_vmalloc(start, end, start, end, KASAN_VMALLOC_TLB_FLUSH); +} + static void purge_vmap_node(struct work_struct *work) { struct vmap_node *vn = container_of(work, @@ -2194,20 +2213,17 @@ static void purge_vmap_node(struct work_ struct vmap_area *va, *n_va; LIST_HEAD(local_list); + if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) + kasan_release_vmalloc_node(vn); + vn->nr_purged = 0; list_for_each_entry_safe(va, n_va, &vn->purge_list, list) { unsigned long nr = (va->va_end - va->va_start) >> PAGE_SHIFT; - unsigned long orig_start = va->va_start; - unsigned long orig_end = va->va_end; unsigned int vn_id = decode_vn_id(va->flags); list_del_init(&va->list); - if (is_vmalloc_or_module_addr((void *)orig_start)) - kasan_release_vmalloc(orig_start, orig_end, - va->va_start, va->va_end); - atomic_long_sub(nr, &vmap_lazy_nr); vn->nr_purged++; @@ -4789,7 +4805,8 @@ recovery: &free_vmap_area_list); if (va) kasan_release_vmalloc(orig_start, orig_end, - va->va_start, va->va_end); + va->va_start, va->va_end, + KASAN_VMALLOC_PAGE_RANGE | KASAN_VMALLOC_TLB_FLUSH); vas[area] = NULL; } @@ -4839,7 +4856,8 @@ err_free_shadow: &free_vmap_area_list); if (va) kasan_release_vmalloc(orig_start, orig_end, - va->va_start, va->va_end); + va->va_start, va->va_end, + KASAN_VMALLOC_PAGE_RANGE | KASAN_VMALLOC_TLB_FLUSH); vas[area] = NULL; kfree(vms[area]); } _ Patches currently in -mm which might be from ahuang12(a)lenovo.com are mm-vmalloc-combine-all-tlb-flush-operations-of-kasan-shadow-virtual-address-into-one-operation.patch

7 months, 2 weeks

1
0
0 0

[PATCH] kbuild: Fix '-S -c' in x86 stack protector scripts

by Nathan Chancellor

After a recent change in clang to stop consuming all instances of '-S' and '-c' [1], the stack protector scripts break due to the kernel's use of -Werror=unused-command-line-argument to catch cases where flags are not being properly consumed by the compiler driver: $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument] This results in CONFIG_STACKPROTECTOR getting disabled because CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set. '-c' and '-S' both instruct the compiler to stop at different stages of the pipeline ('-S' after compiling, '-c' after assembling), so having them present together in the same command makes little sense. In this case, the test wants to stop before assembling because it is looking at the textual assembly output of the compiler for either '%fs' or '%gs', so remove '-c' from the list of arguments to resolve the error. All versions of GCC continue to work after this change, along with versions of clang that do or do not contain the change mentioned above. Cc: stable(a)vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353… [1] Signed-off-by: Nathan Chancellor <nathan(a)kernel.org> --- I think this could go via either -tip or Kbuild? Perhaps this is an issue in the clang commit mentioned in the message above since it deviates from GCC (Fangrui is on CC here) but I think the combination of these options is a little dubious to begin with, hence this change. --- scripts/gcc-x86_32-has-stack-protector.sh | 2 +- scripts/gcc-x86_64-has-stack-protector.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/gcc-x86_32-has-stack-protector.sh b/scripts/gcc-x86_32-has-stack-protector.sh index 825c75c5b715..9459ca4f0f11 100755 --- a/scripts/gcc-x86_32-has-stack-protector.sh +++ b/scripts/gcc-x86_32-has-stack-protector.sh @@ -5,4 +5,4 @@ # -mstack-protector-guard-reg, added by # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81708 -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m32 -O0 -fstack-protector -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard - -o - 2> /dev/null | grep -q "%fs" +echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -m32 -O0 -fstack-protector -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard - -o - 2> /dev/null | grep -q "%fs" diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh index 75e4e22b986a..f680bb01aeeb 100755 --- a/scripts/gcc-x86_64-has-stack-protector.sh +++ b/scripts/gcc-x86_64-has-stack-protector.sh @@ -1,4 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" +echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" --- base-commit: 1722389b0d863056d78287a120a1d6cadb8d4f7b change-id: 20240726-fix-x86-stack-protector-tests-b542b1b9416b Best regards, -- Nathan Chancellor <nathan(a)kernel.org>

7 months, 2 weeks

3
7
0 0

[PATCH AUTOSEL 4.19 1/4] PCI: Add ACS quirk for Broadcom BCM5760X NIC

by Sasha Levin

From: Ajit Khaparde <ajit.khaparde(a)broadcom.com> [ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ] The Broadcom BCM5760X NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broa… Signed-off-by: Ajit Khaparde <ajit.khaparde(a)broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Andy Gospodarek <gospo(a)broadcom.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bb51820890965..a3a4c4724b6c9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4822,6 +4822,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, { 0 } }; -- 2.43.0

7 months, 2 weeks

1
3
0 0

[PATCH AUTOSEL 5.4 1/7] PCI: Add ACS quirk for Broadcom BCM5760X NIC

by Sasha Levin

From: Ajit Khaparde <ajit.khaparde(a)broadcom.com> [ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ] The Broadcom BCM5760X NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broa… Signed-off-by: Ajit Khaparde <ajit.khaparde(a)broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Andy Gospodarek <gospo(a)broadcom.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 3bc7058404156..aef73bc36ee98 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4986,6 +4986,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, -- 2.43.0

7 months, 2 weeks

1
6
0 0

[PATCH AUTOSEL 6.1 01/15] PCI: Add ACS quirk for Broadcom BCM5760X NIC

by Sasha Levin

From: Ajit Khaparde <ajit.khaparde(a)broadcom.com> [ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ] The Broadcom BCM5760X NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broa… Signed-off-by: Ajit Khaparde <ajit.khaparde(a)broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Andy Gospodarek <gospo(a)broadcom.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 56dce858a6934..e02a1e513f989 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4997,6 +4997,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, -- 2.43.0

7 months, 2 weeks

1
14
0 0

[PATCH AUTOSEL 6.6 01/17] PCI: Add ACS quirk for Broadcom BCM5760X NIC

by Sasha Levin

From: Ajit Khaparde <ajit.khaparde(a)broadcom.com> [ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ] The Broadcom BCM5760X NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broa… Signed-off-by: Ajit Khaparde <ajit.khaparde(a)broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Andy Gospodarek <gospo(a)broadcom.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index ec4277d7835b2..1bf1a83dabb93 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5092,6 +5092,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, -- 2.43.0

7 months, 2 weeks

1
16
0 0

[PATCH AUTOSEL 6.10 01/23] PCI: Add ACS quirk for Broadcom BCM5760X NIC

by Sasha Levin

From: Ajit Khaparde <ajit.khaparde(a)broadcom.com> [ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ] The Broadcom BCM5760X NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broa… Signed-off-by: Ajit Khaparde <ajit.khaparde(a)broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Andy Gospodarek <gospo(a)broadcom.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 568410e64ce64..a2ce4e08edf5a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5099,6 +5099,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, -- 2.43.0

7 months, 2 weeks

1
22
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2024