September 2024 - Linux-stable-mirror

[tip: timers/urgent] clocksource/drivers/imx-tpm: Fix next event not taking effect sometime

by tip-bot2 for Jacky Bai

The following commit has been merged into the timers/urgent branch of tip: Commit-ID: 3d5c2f8e75a55cfb11a85086c71996af0354a1fb Gitweb: https://git.kernel.org/tip/3d5c2f8e75a55cfb11a85086c71996af0354a1fb Author: Jacky Bai <ping.bai(a)nxp.com> AuthorDate: Thu, 25 Jul 2024 15:33:55 -04:00 Committer: Daniel Lezcano <daniel.lezcano(a)linaro.org> CommitterDate: Mon, 02 Sep 2024 10:04:15 +02:00 clocksource/drivers/imx-tpm: Fix next event not taking effect sometime The value written into the TPM CnV can only be updated into the hardware when the counter increases. Additional writes to the CnV write buffer are ignored until the register has been updated. Therefore, we need to check if the CnV has been updated before continuing. This may require waiting for 1 counter cycle in the worst case. Cc: stable(a)vger.kernel.org Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Jacky Bai <ping.bai(a)nxp.com> Reviewed-by: Peng Fan <peng.fan(a)nxp.com> Reviewed-by: Ye Li <ye.li(a)nxp.com> Reviewed-by: Jason Liu <jason.hui.liu(a)nxp.com> Signed-off-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> --- drivers/clocksource/timer-imx-tpm.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c index cd23caf..92c025b 100644 --- a/drivers/clocksource/timer-imx-tpm.c +++ b/drivers/clocksource/timer-imx-tpm.c @@ -91,6 +91,14 @@ static int tpm_set_next_event(unsigned long delta, now = tpm_read_counter(); /* + * Need to wait CNT increase at least 1 cycle to make sure + * the C0V has been updated into HW. + */ + if ((next & 0xffffffff) != readl(timer_base + TPM_C0V)) + while (now == tpm_read_counter()) + ; + + /* * NOTE: We observed in a very small probability, the bus fabric * contention between GPU and A7 may results a few cycles delay * of writing CNT registers which may cause the min_delta event got

3 months, 3 weeks

1
0
0 0

[PATCH v6.1] f2fs: fix to truncate preallocated blocks in f2fs_file_open()

by Shivani Agarwal

From: Chao Yu <chao(a)kernel.org> [ Upstream commit 298b1e4182d657c3e388adcc29477904e9600ed5 ] chenyuwen reports a f2fs bug as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000011 fscrypt_set_bio_crypt_ctx+0x78/0x1e8 f2fs_grab_read_bio+0x78/0x208 f2fs_submit_page_read+0x44/0x154 f2fs_get_read_data_page+0x288/0x5f4 f2fs_get_lock_data_page+0x60/0x190 truncate_partial_data_page+0x108/0x4fc f2fs_do_truncate_blocks+0x344/0x5f0 f2fs_truncate_blocks+0x6c/0x134 f2fs_truncate+0xd8/0x200 f2fs_iget+0x20c/0x5ac do_garbage_collect+0x5d0/0xf6c f2fs_gc+0x22c/0x6a4 f2fs_disable_checkpoint+0xc8/0x310 f2fs_fill_super+0x14bc/0x1764 mount_bdev+0x1b4/0x21c f2fs_mount+0x20/0x30 legacy_get_tree+0x50/0xbc vfs_get_tree+0x5c/0x1b0 do_new_mount+0x298/0x4cc path_mount+0x33c/0x5fc __arm64_sys_mount+0xcc/0x15c invoke_syscall+0x60/0x150 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec It is because inode.i_crypt_info is not initialized during below path: - mount - f2fs_fill_super - f2fs_disable_checkpoint - f2fs_gc - f2fs_iget - f2fs_truncate So, let's relocate truncation of preallocated blocks to f2fs_file_open(), after fscrypt_file_open(). Fixes: d4dd19ec1ea0 ("f2fs: do not expose unwritten blocks to user by DIO") Reported-by: chenyuwen <yuwen.chen(a)xjmz.com> Closes: https://lore.kernel.org/linux-kernel/20240517085327.1188515-1-yuwen.chen@xj… Signed-off-by: Chao Yu <chao(a)kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Shivani Agarwal <shivani.agarwal(a)broadcom.com> --- fs/f2fs/f2fs.h | 1 + fs/f2fs/file.c | 42 +++++++++++++++++++++++++++++++++++++++++- fs/f2fs/inode.c | 8 -------- 3 files changed, 42 insertions(+), 9 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index a02c74875..2b540d878 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -788,6 +788,7 @@ enum { FI_ALIGNED_WRITE, /* enable aligned write */ FI_COW_FILE, /* indicate COW file */ FI_ATOMIC_COMMITTED, /* indicate atomic commit completed except disk sync */ + FI_OPENED_FILE, /* indicate file has been opened */ FI_MAX, /* max flag, never be used */ }; diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index c6fb179f9..62f2521cd 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -538,6 +538,42 @@ static int f2fs_file_mmap(struct file *file, struct vm_area_struct *vma) return 0; } +static int finish_preallocate_blocks(struct inode *inode) +{ + int ret; + + inode_lock(inode); + if (is_inode_flag_set(inode, FI_OPENED_FILE)) { + inode_unlock(inode); + return 0; + } + + if (!file_should_truncate(inode)) { + set_inode_flag(inode, FI_OPENED_FILE); + inode_unlock(inode); + return 0; + } + + f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]); + filemap_invalidate_lock(inode->i_mapping); + + truncate_setsize(inode, i_size_read(inode)); + ret = f2fs_truncate(inode); + + filemap_invalidate_unlock(inode->i_mapping); + f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]); + + if (!ret) + set_inode_flag(inode, FI_OPENED_FILE); + + inode_unlock(inode); + if (ret) + return ret; + + file_dont_truncate(inode); + return 0; +} + static int f2fs_file_open(struct inode *inode, struct file *filp) { int err = fscrypt_file_open(inode, filp); @@ -554,7 +590,11 @@ static int f2fs_file_open(struct inode *inode, struct file *filp) filp->f_mode |= FMODE_NOWAIT; - return dquot_file_open(inode, filp); + err = dquot_file_open(inode, filp); + if (err) + return err; + + return finish_preallocate_blocks(inode); } void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count) diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index ff4a4e92a..5b672df19 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -549,14 +549,6 @@ struct inode *f2fs_iget(struct super_block *sb, unsigned long ino) } f2fs_set_inode_flags(inode); - if (file_should_truncate(inode) && - !is_sbi_flag_set(sbi, SBI_POR_DOING)) { - ret = f2fs_truncate(inode); - if (ret) - goto bad_inode; - file_dont_truncate(inode); - } - unlock_new_inode(inode); trace_f2fs_iget(inode); return inode; -- 2.39.4

3 months, 3 weeks

1
0
0 0

[PATCH 6.1 0/1] pm, restore async device resume optimization

by Yenchia Chen

We have met a deadlock issue on our device which use 5.15.y when resuming. After applying this patch which is picked from mainline, issue solved. Backport to 6.1.y also. Rafael J. Wysocki (1): PM: sleep: Restore asynchronous device resume optimization drivers/base/power/main.c | 117 +++++++++++++++++++++----------------- include/linux/pm.h | 1 + 2 files changed, 65 insertions(+), 53 deletions(-) -- 2.18.0

3 months, 3 weeks

1
1
0 0

[PATCH] pinctrl: qcom: x1e80100: Bypass PDC wakeup parent for now

by Stephan Gerhold

On X1E80100, GPIO interrupts for wakeup-capable pins have been broken since the introduction of the pinctrl driver. This prevents keyboard and touchpad from working on most of the X1E laptops. So far we have worked around this by manually building a kernel with the "wakeup-parent" removed from the pinctrl node in the device tree, but we cannot expect all users to do that. Implement a similar workaround in the driver by clearing the wakeirq_map for X1E80100. This avoids using the PDC wakeup parent for all GPIOs and handles the interrupts directly in the pinctrl driver instead. The PDC driver needs additional changes to support X1E80100 properly. Adding a workaround separately first allows to land the necessary PDC changes through the normal release cycle, while still solving the more critical problem with keyboard and touchpad on the current stable kernel versions. Bypassing the PDC is enough for now, because we have not yet enabled the deep idle states where using the PDC becomes necessary. Cc: stable(a)vger.kernel.org Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver") Signed-off-by: Stephan Gerhold <stephan.gerhold(a)linaro.org> --- Commenting out .wakeirq_map as well would give an unused declaration warning for x1e80100_pdc_map. The map itself is correct, so I just "clear" it by setting .nwakeirq_map to 0 for now. It's just temporary - this patch will be reverted after we add X1E80100 support to the PDC driver. --- drivers/pinctrl/qcom/pinctrl-x1e80100.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-x1e80100.c b/drivers/pinctrl/qcom/pinctrl-x1e80100.c index 65ed933f05ce..abfcdd3da9e8 100644 --- a/drivers/pinctrl/qcom/pinctrl-x1e80100.c +++ b/drivers/pinctrl/qcom/pinctrl-x1e80100.c @@ -1839,7 +1839,9 @@ static const struct msm_pinctrl_soc_data x1e80100_pinctrl = { .ngroups = ARRAY_SIZE(x1e80100_groups), .ngpios = 239, .wakeirq_map = x1e80100_pdc_map, - .nwakeirq_map = ARRAY_SIZE(x1e80100_pdc_map), + /* TODO: Enabling PDC currently breaks GPIO interrupts */ + .nwakeirq_map = 0, + /* .nwakeirq_map = ARRAY_SIZE(x1e80100_pdc_map), */ .egpio_func = 9, }; --- base-commit: 128f71fe014fc91efa1407ce549f94a9a9f1072c change-id: 20240830-x1e80100-bypass-pdc-39a8c1ae594f Best regards, -- Stephan Gerhold <stephan.gerhold(a)linaro.org>

3 months, 3 weeks

5
4
0 0

[PATCH] wifi: mt76: mt7925: fix a potential association failure upon resuming

by Mingyen Hsieh

From: Michael Lo <michael.lo(a)mediatek.com> In multi-channel scenarios, the granted channel must be aborted before suspending. Otherwise, the firmware will be put into a wrong state, resulting in an association failure after resuming. With this patch, the granted channel will be aborted before suspending if necessary. Cc: stable(a)vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo(a)mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh(a)mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt7925/main.c | 15 +++++++++++++++ .../net/wireless/mediatek/mt76/mt7925/mt7925.h | 1 + drivers/net/wireless/mediatek/mt76/mt7925/pci.c | 2 ++ 3 files changed, 18 insertions(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c index 8c0768bf9343..7c05aebd3c20 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c @@ -439,6 +439,19 @@ static void mt7925_roc_iter(void *priv, u8 *mac, mt7925_mcu_abort_roc(phy, &mvif->bss_conf, phy->roc_token_id); } +void mt7925_roc_abort_sync(struct mt792x_dev *dev) +{ + struct mt792x_phy *phy = &dev->phy; + + del_timer_sync(&phy->roc_timer); + cancel_work_sync(&phy->roc_work); + if (test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state)) + ieee80211_iterate_interfaces(mt76_hw(dev), + IEEE80211_IFACE_ITER_RESUME_ALL, + mt7925_roc_iter, (void *)phy); +} +EXPORT_SYMBOL_GPL(mt7925_roc_abort_sync); + void mt7925_roc_work(struct work_struct *work) { struct mt792x_phy *phy; @@ -1109,6 +1122,8 @@ static void mt7925_mac_link_sta_remove(struct mt76_dev *mdev, msta = (struct mt792x_sta *)link_sta->sta->drv_priv; mlink = mt792x_sta_to_link(msta, link_id); + mt7925_roc_abort_sync(dev); + mt76_connac_free_pending_tx_skbs(&dev->pm, &mlink->wcid); mt76_connac_pm_wake(&dev->mphy, &dev->pm); diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h b/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h index 669f3a079d04..c5ea431998e0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h @@ -307,6 +307,7 @@ int mt7925_mcu_set_roc(struct mt792x_phy *phy, struct mt792x_bss_conf *mconf, enum mt7925_roc_req type, u8 token_id); int mt7925_mcu_abort_roc(struct mt792x_phy *phy, struct mt792x_bss_conf *mconf, u8 token_id); +void mt7925_roc_abort_sync(struct mt792x_dev *dev); int mt7925_mcu_fill_message(struct mt76_dev *mdev, struct sk_buff *skb, int cmd, int *wait_seq); int mt7925_mcu_add_key(struct mt76_dev *dev, struct ieee80211_vif *vif, diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c index 6e4f4e78c350..39305c39362f 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c @@ -449,6 +449,8 @@ static int mt7925_pci_suspend(struct device *device) cancel_delayed_work_sync(&pm->ps_work); cancel_work_sync(&pm->wake_work); + mt7925_roc_abort_sync(dev); + err = mt792x_mcu_drv_pmctrl(dev); if (err < 0) goto restore_suspend; -- 2.45.2

3 months, 3 weeks

1
0
0 0

[PATCH v5.10-v5.15] rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow

by Vamsi Krishna Brahmajosyula

From: Nikita Kiryushin <kiryushin(a)ancud.ru> [ Upstream commit cc5645fddb0ce28492b15520306d092730dffa48 ] There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: edf3775f0ad6 ("rcu-tasks: Add count for idle tasks on offline CPUs") Signed-off-by: Nikita Kiryushin <kiryushin(a)ancud.ru> Reviewed-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Paul E. McKenney <paulmck(a)kernel.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki(a)gmail.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Vamsi Krishna Brahmajosyula <vamsi-krishna.brahmajosyula(a)broadcom.com> --- kernel/rcu/tasks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h index 105fdc2bb004..bede3a4f108e 100644 --- a/kernel/rcu/tasks.h +++ b/kernel/rcu/tasks.h @@ -1240,7 +1240,7 @@ static void show_rcu_tasks_trace_gp_kthread(void) { char buf[64]; - sprintf(buf, "N%d h:%lu/%lu/%lu", atomic_read(&trc_n_readers_need_end), + snprintf(buf, sizeof(buf), "N%d h:%lu/%lu/%lu", atomic_read(&trc_n_readers_need_end), data_race(n_heavy_reader_ofl_updates), data_race(n_heavy_reader_updates), data_race(n_heavy_reader_attempts)); -- 2.45.2

3 months, 3 weeks

1
0
0 0

[PATCH rdma-next v2 1/2] RDMA/mana_ib: use the correct page table index based on hardware page size

by longli＠linuxonhyperv.com

From: Long Li <longli(a)microsoft.com> MANA hardware uses 4k page size. When calculating the page table index, it should use the hardware page size, not the system page size. Cc: stable(a)vger.kernel.org Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Signed-off-by: Long Li <longli(a)microsoft.com> --- change log v2: replaced net with rdma-next tag in patch title and simplified the title drivers/infiniband/hw/mana/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mana/main.c b/drivers/infiniband/hw/mana/main.c index d13abc954d2a..f68f54aea820 100644 --- a/drivers/infiniband/hw/mana/main.c +++ b/drivers/infiniband/hw/mana/main.c @@ -383,7 +383,7 @@ static int mana_ib_gd_create_dma_region(struct mana_ib_dev *dev, struct ib_umem create_req->length = umem->length; create_req->offset_in_page = ib_umem_dma_offset(umem, page_sz); - create_req->gdma_page_type = order_base_2(page_sz) - PAGE_SHIFT; + create_req->gdma_page_type = order_base_2(page_sz) - MANA_PAGE_SHIFT; create_req->page_count = num_pages_total; ibdev_dbg(&dev->ib_dev, "size_dma_region %lu num_pages_total %lu\n", -- 2.17.1

3 months, 3 weeks

2
2
0 0

[PATCH v3 RESEND] pps: add an error check in parport_attach

by Ma Ke

In parport_attach, the return value of ida_alloc is unchecked, witch leads to the use of an invalid index value. To address this issue, index should be checked. When the index value is abnormal, the device should be freed. Found by code review, compile tested only. Cc: stable(a)vger.kernel.org Fixes: fb56d97df70e ("pps: client: use new parport device model") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- Changes in v3: - modified Fixes tag as suggestions. Changes in v2: - removed error output as suggestions. --- drivers/pps/clients/pps_parport.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c index 63d03a0df5cc..abaffb4e1c1c 100644 --- a/drivers/pps/clients/pps_parport.c +++ b/drivers/pps/clients/pps_parport.c @@ -149,6 +149,9 @@ static void parport_attach(struct parport *port) } index = ida_alloc(&pps_client_index, GFP_KERNEL); + if (index < 0) + goto err_free_device; + memset(&pps_client_cb, 0, sizeof(pps_client_cb)); pps_client_cb.private = device; pps_client_cb.irq_func = parport_irq; @@ -159,7 +162,7 @@ static void parport_attach(struct parport *port) index); if (!device->pardev) { pr_err("couldn't register with %s\n", port->name); - goto err_free; + goto err_free_ida; } if (parport_claim_or_block(device->pardev) < 0) { @@ -187,8 +190,9 @@ static void parport_attach(struct parport *port) parport_release(device->pardev); err_unregister_dev: parport_unregister_device(device->pardev); -err_free: +err_free_ida: ida_free(&pps_client_index, index); +err_free_device: kfree(device); } -- 2.25.1

3 months, 3 weeks

2
1
0 0

Fwd: [PATCH 3/9] xfs: xfs_finobt_count_blocks() walks the wrong btree

by Anders Blomdell

Dave forgot to mark the original patch for stable, so after consulting with Dave, here it comes @Greg: you might want to add the patch to all versions that received 14dd46cf31f4 ("xfs: split xfs_inobt_init_cursor") (which I think is v6.9 and v6.10) /Anders -------- Forwarded Message -------- Subject: [PATCH 3/9] xfs: xfs_finobt_count_blocks() walks the wrong btree Date: Thu, 22 Aug 2024 16:59:33 -0700 From: Darrick J. Wong <djwong(a)kernel.org> To: djwong(a)kernel.org CC: Anders Blomdell <anders.blomdell(a)gmail.com>, Dave Chinner <dchinner(a)redhat.com>, Christoph Hellwig <hch(a)lst.de>, hch(a)lst.de, linux-xfs(a)vger.kernel.org From: Dave Chinner <dchinner(a)redhat.com> As a result of the factoring in commit 14dd46cf31f4 ("xfs: split xfs_inobt_init_cursor"), mount started taking a long time on a user's filesystem. For Anders, this made mount times regress from under a second to over 15 minutes for a filesystem with only 30 million inodes in it. Anders bisected it down to the above commit, but even then the bug was not obvious. In this commit, over 20 calls to xfs_inobt_init_cursor() were modified, and some we modified to call a new function named xfs_finobt_init_cursor(). If that takes you a moment to reread those function names to see what the rename was, then you have realised why this bug wasn't spotted during review. And it wasn't spotted on inspection even after the bisect pointed at this commit - a single missing "f" isn't the easiest thing for a human eye to notice.... The result is that xfs_finobt_count_blocks() now incorrectly calls xfs_inobt_init_cursor() so it is now walking the inobt instead of the finobt. Hence when there are lots of allocated inodes in a filesystem, mount takes a -long- time run because it now walks a massive allocated inode btrees instead of the small, nearly empty free inode btrees. It also means all the finobt space reservations are wrong, so mount could potentially given ENOSPC on kernel upgrade. In hindsight, commit 14dd46cf31f4 should have been two commits - the first to convert the finobt callers to the new API, the second to modify the xfs_inobt_init_cursor() API for the inobt callers. That would have made the bug very obvious during review. Fixes: 14dd46cf31f4 ("xfs: split xfs_inobt_init_cursor") Reported-by: Anders Blomdell <anders.blomdell(a)gmail.com> Signed-off-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Signed-off-by: Darrick J. Wong <djwong(a)kernel.org> --- fs/xfs/libxfs/xfs_ialloc_btree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/libxfs/xfs_ialloc_btree.c b/fs/xfs/libxfs/xfs_ialloc_btree.c index 496e2f72a85b9..797d5b5f7b725 100644 --- a/fs/xfs/libxfs/xfs_ialloc_btree.c +++ b/fs/xfs/libxfs/xfs_ialloc_btree.c @@ -749,7 +749,7 @@ xfs_finobt_count_blocks( if (error) return error; - cur = xfs_inobt_init_cursor(pag, tp, agbp); + cur = xfs_finobt_init_cursor(pag, tp, agbp); error = xfs_btree_count_blocks(cur, tree_blocks); xfs_btree_del_cursor(cur, error); xfs_trans_brelse(tp, agbp);

3 months, 3 weeks

2
3
0 0

[merged mm-nonmm-stable] scripts-gdb-fix-lx-mounts-command-error.patch removed from -mm tree

by Andrew Morton

The quilt patch titled Subject: scripts/gdb: fix lx-mounts command error has been removed from the -mm tree. Its filename was scripts-gdb-fix-lx-mounts-command-error.patch This patch was dropped because it was merged into the mm-nonmm-stable branch of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm ------------------------------------------------------ From: Kuan-Ying Lee <kuan-ying.lee(a)canonical.com> Subject: scripts/gdb: fix lx-mounts command error Date: Tue, 23 Jul 2024 14:48:59 +0800 (gdb) lx-mounts mount super_block devname pathname fstype options Python Exception <class 'gdb.error'>: There is no member named list. Error occurred in Python: There is no member named list. We encounter the above issue after commit 2eea9ce4310d ("mounts: keep list of mounts in an rbtree"). The commit move a mount from list into rbtree. So we can instead use rbtree to iterate all mounts information. Link: https://lkml.kernel.org/r/20240723064902.124154-4-kuan-ying.lee@canonical.c… Fixes: 2eea9ce4310d ("mounts: keep list of mounts in an rbtree") Signed-off-by: Kuan-Ying Lee <kuan-ying.lee(a)canonical.com> Cc: Jan Kiszka <jan.kiszka(a)siemens.com> Cc: Kieran Bingham <kbingham(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- scripts/gdb/linux/proc.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/scripts/gdb/linux/proc.py~scripts-gdb-fix-lx-mounts-command-error +++ a/scripts/gdb/linux/proc.py @@ -18,6 +18,7 @@ from linux import utils from linux import tasks from linux import lists from linux import vfs +from linux import rbtree from struct import * @@ -172,8 +173,7 @@ values of that process namespace""" gdb.write("{:^18} {:^15} {:>9} {} {} options\n".format( "mount", "super_block", "devname", "pathname", "fstype")) - for mnt in lists.list_for_each_entry(namespace['list'], - mount_ptr_type, "mnt_list"): + for mnt in rbtree.rb_inorder_for_each_entry(namespace['mounts'], mount_ptr_type, "mnt_node"): devname = mnt['mnt_devname'].string() devname = devname if devname else "none" _ Patches currently in -mm which might be from kuan-ying.lee(a)canonical.com are

3 months, 3 weeks

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2024