January 2025 - Linux-stable-mirror

[PATCH 6.1.y] scsi: storvsc: Ratelimit warning logs to prevent VM denial of service

by Easwar Hariharan

commit d2138eab8cde61e0e6f62d0713e45202e8457d6d upstream If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. Closes: https://github.com/microsoft/WSL/issues/9173 Signed-off-by: Easwar Hariharan <eahariha(a)linux.microsoft.com> Link: https://lore.kernel.org/r/20250107-eahariha-ratelimit-storvsc-v1-1-7fc193d1… Reviewed-by: Michael Kelley <mhklinux(a)outlook.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Easwar Hariharan <eahariha(a)linux.microsoft.com> --- drivers/scsi/storvsc_drv.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 0685cbe7f0eb..d47adab00f04 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -171,6 +171,12 @@ do { \ dev_warn(&(dev)->device, fmt, ##__VA_ARGS__); \ } while (0) +#define storvsc_log_ratelimited(dev, level, fmt, ...) \ +do { \ + if (do_logging(level)) \ + dev_warn_ratelimited(&(dev)->device, fmt, ##__VA_ARGS__); \ +} while (0) + struct vmscsi_request { u16 length; u8 srb_status; @@ -1168,7 +1174,7 @@ static void storvsc_on_io_completion(struct storvsc_device *stor_device, int loglevel = (stor_pkt->vm_srb.cdb[0] == TEST_UNIT_READY) ? STORVSC_LOGGING_WARN : STORVSC_LOGGING_ERROR; - storvsc_log(device, loglevel, + storvsc_log_ratelimited(device, loglevel, "tag#%d cmd 0x%x status: scsi 0x%x srb 0x%x hv 0x%x\n", scsi_cmd_to_rq(request->cmd)->tag, stor_pkt->vm_srb.cdb[0], -- 2.43.0

5 months, 1 week

2
1
0 0

[PATCH v2 2/3] misc: pci_endpoint_test: Fix disyplaying irq_type after request_irq error

by Kunihiko Hayashi

There are two variables that indicate the interrupt type to be used in the next test execution, global "irq_type" and test->irq_type. The former is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). In pci_endpoint_test_request_irq(), since this global variable is referenced when an error occurs, the unintended error message is displayed. For example, the following message shows "MSI 3" even if the current irq type becomes "MSI-X". # pcitest -i 2 pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3 SET IRQ TYPE TO MSI-X: NOT OKAY Fix this issue by using test->irq_type instead of global "irq_type". Cc: stable(a)vger.kernel.org Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> --- drivers/misc/pci_endpoint_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 302955c20979..a342587fc78a 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -235,7 +235,7 @@ static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test) return true; fail: - switch (irq_type) { + switch (test->irq_type) { case IRQ_TYPE_INTX: dev_err(dev, "Failed to request IRQ %d for Legacy\n", pci_irq_vector(pdev, i)); -- 2.25.1

5 months, 1 week

2
1
0 0

Supplier Needed............

by Cesandra Pace

Attention: Sir/Madam, I am Cesandra Pace, a Research Assistant working with Pharma CURE Laboratory Ltd. We are Bio-pharmaceutical Company here in the U.K.I'm looking for a reliable businessman/individual in your region to represent this company in sourcing some of our basic raw materials used for the manufacturing of high quality Anti-Viral Vaccines, Cancer treatment medications and other lifesaving Pharmaceutical Products. When I receive a response from you, I shall divulge to you my intent for your consideration. Best regards, Cesandra Pace Research & Dev Dept- Pharma CURE Laboratory Ltd UK

5 months, 1 week

1
0
0 0

Supplier Needed............

by Cesandra Pace

Attention: Sir/Madam, I am Cesandra Pace, a Research Assistant working with Pharma CURE Laboratory Ltd. We are Bio-pharmaceutical Company here in the U.K.I'm looking for a reliable businessman/individual in your region to represent this company in sourcing some of our basic raw materials used for the manufacturing of high quality Anti-Viral Vaccines, Cancer treatment medications and other lifesaving Pharmaceutical Products. When I receive a response from you, I shall divulge to you my intent for your consideration. Best regards, Cesandra Pace Research & Dev Dept- Pharma CURE Laboratory Ltd UK

5 months, 1 week

1
0
0 0

[PATCH v2] xfs: Add error handling for xfs_reflink_cancel_cow_range

by Wentao Liang

In xfs_inactive(), xfs_reflink_cancel_cow_range() is called without error handling, risking unnoticed failures and inconsistent behavior compared to other parts of the code. Fix this issue by adding an error handling for the xfs_reflink_cancel_cow_range(), improving code robustness. Fixes: 6231848c3aa5 ("xfs: check for cow blocks before trying to clear them") Cc: <stable(a)vger.kernel.org> # v4.17 Reviewed-by: "Darrick J. Wong" <djwong(a)kernel.org> Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- fs/xfs/xfs_inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index c8ad2606f928..1ff514b6c035 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1404,8 +1404,11 @@ xfs_inactive( goto out; /* Try to clean out the cow blocks if there are any. */ - if (xfs_inode_has_cow_data(ip)) - xfs_reflink_cancel_cow_range(ip, 0, NULLFILEOFF, true); + if (xfs_inode_has_cow_data(ip)) { + error = xfs_reflink_cancel_cow_range(ip, 0, NULLFILEOFF, true); + if (error) + goto out; + } if (VFS_I(ip)->i_nlink != 0) { /* -- 2.42.0.windows.2

5 months, 1 week

2
1
0 0

[PATCH v2] xfs: Propagate errors from xfs_reflink_cancel_cow_range in xfs_dax_write_iomap_end

by Wentao Liang

In xfs_dax_write_iomap_end(), directly return the result of xfs_reflink_cancel_cow_range() when !written, ensuring proper error propagation and improving code robustness. Fixes: ea6c49b784f0 ("xfs: support CoW in fsdax mode") Cc: <stable(a)vger.kernel.org> # v6.0 Reviewed-by: "Darrick J. Wong" <djwong(a)kernel.org> Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- fs/xfs/xfs_iomap.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 50fa3ef89f6c..d61460309a78 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -976,10 +976,8 @@ xfs_dax_write_iomap_end( if (!xfs_is_cow_inode(ip)) return 0; - if (!written) { - xfs_reflink_cancel_cow_range(ip, pos, length, true); - return 0; - } + if (!written) + return xfs_reflink_cancel_cow_range(ip, pos, length, true); return xfs_reflink_end_cow(ip, pos, written); } -- 2.42.0.windows.2

5 months, 1 week

2
1
0 0

[PATCH v2] ata: libata-sff: Ensure that we cannot write outside the allocated buffer

by Niklas Cassel

reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer. Cc: stable(a)vger.kernel.org Reported-by: reveliofuzzing <reveliofuzzing(a)gmail.com> Closes: https://lore.kernel.org/linux-ide/CA+-ZZ_jTgxh3bS7m+KX07_EWckSnW3N2adX3KV63… Signed-off-by: Niklas Cassel <cassel(a)kernel.org> --- Changes since v1: -Add stable to Cc. drivers/ata/libata-sff.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 67f277e1c3bf..5a46c066abc3 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -601,7 +601,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct page *page; - unsigned int offset; + unsigned int offset, count; if (!qc->cursg) { qc->curbytes = qc->nbytes; @@ -617,25 +617,27 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - trace_ata_sff_pio_transfer_data(qc, offset, qc->sect_size); + /* don't overrun current sg */ + count = min(qc->cursg->length - qc->cursg_ofs, qc->sect_size); + + trace_ata_sff_pio_transfer_data(qc, offset, count); /* * Split the transfer when it splits a page boundary. Note that the * split still has to be dword aligned like all ATA data transfers. */ WARN_ON_ONCE(offset % 4); - if (offset + qc->sect_size > PAGE_SIZE) { + if (offset + count > PAGE_SIZE) { unsigned int split_len = PAGE_SIZE - offset; ata_pio_xfer(qc, page, offset, split_len); - ata_pio_xfer(qc, nth_page(page, 1), 0, - qc->sect_size - split_len); + ata_pio_xfer(qc, nth_page(page, 1), 0, count - split_len); } else { - ata_pio_xfer(qc, page, offset, qc->sect_size); + ata_pio_xfer(qc, page, offset, count); } - qc->curbytes += qc->sect_size; - qc->cursg_ofs += qc->sect_size; + qc->curbytes += count; + qc->cursg_ofs += count; if (qc->cursg_ofs == qc->cursg->length) { qc->cursg = sg_next(qc->cursg); -- 2.48.1

5 months, 1 week

1
1
0 0

[PATCH] arm64: dts: rockchip: Fix broken tsadc pinctrl binding for rk3588

by Alexander Shiyan

There is no pinctrl "gpio" and "otpout" (probably designed as "output") handling in the tsadc driver. Let's use proper binding "default" and "sleep". Fixes: 32641b8ab1a5 ("arm64: dts: rockchip: add rk3588 thermal sensor") Cc: stable(a)vger.kernel.org Signed-off-by: Alexander Shiyan <eagle.alexander923(a)gmail.com> --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index a337f3fb8377..f141065eb69d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -2667,9 +2667,9 @@ tsadc: tsadc@fec00000 { rockchip,hw-tshut-temp = <120000>; rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ - pinctrl-0 = <&tsadc_gpio_func>; - pinctrl-1 = <&tsadc_shut>; - pinctrl-names = "gpio", "otpout"; + pinctrl-0 = <&tsadc_shut>; + pinctrl-1 = <&tsadc_gpio_func>; + pinctrl-names = "default", "sleep"; #thermal-sensor-cells = <1>; status = "disabled"; }; -- 2.39.1

5 months, 1 week

3
14
0 0

[PATCH v2] clk: renesas: r9a07g043: Fix HP clock source for RZ/Five SoC

by Prabhakar

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock source for HP is derived from PLL6 divided by 2. This patch corrects the implementation by configuring HP as a fixed clock source instead of a MUX. The `CPG_PL6_ETH_SSEL` register, which is available on the RZ/G2UL SoC, is not present on the RZ/Five SoC, necessitating this change. Fixes: 95d48d270305ad2c ("clk: renesas: r9a07g043: Add support for RZ/Five SoC") Cc: stable(a)vger.kernel.org Reported-by: Hien Huynh <hien.huynh.px(a)renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> --- v1->v2 - Fixed build warning for non-ARM64 arch, sel_pll6_2 defined but not used. --- drivers/clk/renesas/r9a07g043-cpg.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/clk/renesas/r9a07g043-cpg.c b/drivers/clk/renesas/r9a07g043-cpg.c index b97e9a7b9708..ad712e530328 100644 --- a/drivers/clk/renesas/r9a07g043-cpg.c +++ b/drivers/clk/renesas/r9a07g043-cpg.c @@ -90,7 +90,9 @@ static const struct clk_div_table dtable_1_32[] = { /* Mux clock tables */ static const char * const sel_pll3_3[] = { ".pll3_533", ".pll3_400" }; +#ifdef CONFIG_ARM64 static const char * const sel_pll6_2[] = { ".pll6_250", ".pll5_250" }; +#endif static const char * const sel_sdhi[] = { ".clk_533", ".clk_400", ".clk_266" }; static const u32 mtable_sdhi[] = { 1, 2, 3 }; @@ -138,7 +140,12 @@ static const struct cpg_core_clk r9a07g043_core_clks[] __initconst = { DEF_DIV("P2", R9A07G043_CLK_P2, CLK_PLL3_DIV2_4_2, DIVPL3A, dtable_1_32), DEF_FIXED("M0", R9A07G043_CLK_M0, CLK_PLL3_DIV2_4, 1, 1), DEF_FIXED("ZT", R9A07G043_CLK_ZT, CLK_PLL3_DIV2_4_2, 1, 1), +#ifdef CONFIG_ARM64 DEF_MUX("HP", R9A07G043_CLK_HP, SEL_PLL6_2, sel_pll6_2), +#endif +#ifdef CONFIG_RISCV + DEF_FIXED("HP", R9A07G043_CLK_HP, CLK_PLL6_250, 1, 1), +#endif DEF_FIXED("SPI0", R9A07G043_CLK_SPI0, CLK_DIV_PLL3_C, 1, 2), DEF_FIXED("SPI1", R9A07G043_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4), DEF_SD_MUX("SD0", R9A07G043_CLK_SD0, SEL_SDHI0, SEL_SDHI0_STS, sel_sdhi, -- 2.43.0

5 months, 1 week

2
1
0 0

[PATCH v3 0/4] Venus driver fixes to avoid possible OOB accesses

by Vikash Garodia

This series primarily adds check at relevant places in venus driver where there are possible OOB accesses due to unexpected payload from venus firmware. The patches describes the specific OOB possibility. Please review and share your feedback. Validated on sc7180(v4), rb5(v6) and db410c(v1). Changes in v3: - update the packet parsing logic in hfi_parser. The utility parsing api now returns the size of data parsed, accordingly the parser adjust the remaining bytes, taking care of OOB scenario as well (Bryan) - Link to v2: https://lore.kernel.org/r/20241128-venus_oob_2-v2-0-483ae0a464b8@quicinc.com Changes in v2: - init_codec to always update with latest payload from firmware (Dmitry/Bryan) - Rewrite the logic of packet parsing to consider payload size for different packet type (Bryan) - Consider reading sfr data till available space (Dmitry) - Add reviewed-by tags - Link to v1: https://lore.kernel.org/all/20241105-venus_oob-v1-0-8d4feedfe2bb@quicinc.co… Signed-off-by: Vikash Garodia <quic_vgarodia(a)quicinc.com> --- Vikash Garodia (4): media: venus: hfi_parser: add check to avoid out of bound access media: venus: hfi_parser: refactor hfi packet parsing logic media: venus: hfi: add check to handle incorrect queue size media: venus: hfi: add a check to handle OOB in sfr region drivers/media/platform/qcom/venus/hfi_parser.c | 94 +++++++++++++++++++------- drivers/media/platform/qcom/venus/hfi_venus.c | 15 +++- 2 files changed, 82 insertions(+), 27 deletions(-) --- base-commit: c7ccf3683ac9746b263b0502255f5ce47f64fe0a change-id: 20241115-venus_oob_2-21708239176a Best regards, -- Vikash Garodia <quic_vgarodia(a)quicinc.com>

5 months, 1 week

1
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2025