January 2025 - Linux-stable-mirror

[PATCH] usb: chipidea: ci_hdrc_imx: decrement device's refcount on the error path of .probe()

by Joe Hattori

Current implementation of ci_hdrc_imx_probe() does not decrement the refcount of the device obtained in usbmisc_get_init_data(). Add a put_device() call before returning an error after the call. This bug was found by an experimental static analysis tool that I am developing. Cc: stable(a)vger.kernel.org Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs") Signed-off-by: Joe Hattori <joe(a)pf.is.s.u-tokyo.ac.jp> --- drivers/usb/chipidea/ci_hdrc_imx.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index f2801700be8e..6418052264f2 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -370,25 +370,29 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) data->pinctrl = devm_pinctrl_get(dev); if (PTR_ERR(data->pinctrl) == -ENODEV) data->pinctrl = NULL; - else if (IS_ERR(data->pinctrl)) - return dev_err_probe(dev, PTR_ERR(data->pinctrl), + else if (IS_ERR(data->pinctrl)) { + ret = dev_err_probe(dev, PTR_ERR(data->pinctrl), "pinctrl get failed\n"); + goto err_put; + } data->hsic_pad_regulator = devm_regulator_get_optional(dev, "hsic"); if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) { /* no pad regulator is needed */ data->hsic_pad_regulator = NULL; - } else if (IS_ERR(data->hsic_pad_regulator)) - return dev_err_probe(dev, PTR_ERR(data->hsic_pad_regulator), + } else if (IS_ERR(data->hsic_pad_regulator)) { + ret = dev_err_probe(dev, PTR_ERR(data->hsic_pad_regulator), "Get HSIC pad regulator error\n"); + goto err_put; + } if (data->hsic_pad_regulator) { ret = regulator_enable(data->hsic_pad_regulator); if (ret) { dev_err(dev, "Failed to enable HSIC pad regulator\n"); - return ret; + goto err_put; } } } @@ -402,13 +406,14 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) dev_err(dev, "pinctrl_hsic_idle lookup failed, err=%ld\n", PTR_ERR(pinctrl_hsic_idle)); - return PTR_ERR(pinctrl_hsic_idle); + ret = PTR_ERR(pinctrl_hsic_idle); + goto err_put; } ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle); if (ret) { dev_err(dev, "hsic_idle select failed, err=%d\n", ret); - return ret; + goto err_put; } data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl, @@ -417,7 +422,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) dev_err(dev, "pinctrl_hsic_active lookup failed, err=%ld\n", PTR_ERR(data->pinctrl_hsic_active)); - return PTR_ERR(data->pinctrl_hsic_active); + ret = PTR_ERR(data->pinctrl_hsic_active); + goto err_put; } } @@ -527,6 +533,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) if (pdata.flags & CI_HDRC_PMQOS) cpu_latency_qos_remove_request(&data->pm_qos_req); data->ci_pdev = NULL; +err_put: + put_device(data->usbmisc_data->dev); return ret; } -- 2.34.1

9 months

3
3
0 0

[PATCH 2/3] vfs: Fix implicit conversion problem when testing overflow case

by Julian Sun

The overflow check in generic_copy_file_checks() and generic_remap_checks() is now broken because the result of the addition is implicitly converted to an unsigned type, which disrupts the comparison with signed numbers. This caused the kernel to not return EOVERFLOW in copy_file_range() call with len is set to 0xffffffffa003e45bul. Use the check_add_overflow() macro to fix this issue. Reported-and-tested-by: syzbot+296b1c84b9cbf306e5a0(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=296b1c84b9cbf306e5a0 Fixes: 1383a7ed6749 ("vfs: check file ranges before cloning files") Fixes: 96e6e8f4a68d ("vfs: add missing checks to copy_file_range") Inspired-by: Dave Chinner <david(a)fromorbit.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Julian Sun <sunjunchao2870(a)gmail.com> --- fs/read_write.c | 5 +++-- fs/remap_range.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/read_write.c b/fs/read_write.c index 070a7c33b9dd..5211246edc2e 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -1509,7 +1509,7 @@ static int generic_copy_file_checks(struct file *file_in, loff_t pos_in, struct inode *inode_in = file_inode(file_in); struct inode *inode_out = file_inode(file_out); uint64_t count = *req_count; - loff_t size_in; + loff_t size_in, tmp; int ret; ret = generic_file_rw_checks(file_in, file_out); @@ -1544,7 +1544,8 @@ static int generic_copy_file_checks(struct file *file_in, loff_t pos_in, return -ETXTBSY; /* Ensure offsets don't wrap. */ - if (pos_in + count < pos_in || pos_out + count < pos_out) + if (check_add_overflow(pos_in, count, &tmp) || + check_add_overflow(pos_out, count, &tmp)) return -EOVERFLOW; /* Shorten the copy to EOF */ diff --git a/fs/remap_range.c b/fs/remap_range.c index 28246dfc8485..6fdeb3c8cb70 100644 --- a/fs/remap_range.c +++ b/fs/remap_range.c @@ -36,7 +36,7 @@ static int generic_remap_checks(struct file *file_in, loff_t pos_in, struct inode *inode_out = file_out->f_mapping->host; uint64_t count = *req_count; uint64_t bcount; - loff_t size_in, size_out; + loff_t size_in, size_out, tmp; loff_t bs = inode_out->i_sb->s_blocksize; int ret; @@ -45,7 +45,8 @@ static int generic_remap_checks(struct file *file_in, loff_t pos_in, return -EINVAL; /* Ensure offsets don't wrap. */ - if (pos_in + count < pos_in || pos_out + count < pos_out) + if (check_add_overflow(pos_in, count, &tmp) || + check_add_overflow(pos_out, count, &tmp)) return -EINVAL; size_in = i_size_read(inode_in); -- 2.39.2

9 months

5
7
0 0

[PATCH 6.1.y] i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition

by jianqi.ren.cn＠windriver.com

From: Kaixin Wang <kxwang23(a)m.fudan.edu.cn> [ Upstream commit 609366e7a06d035990df78f1562291c3bf0d4a12 ] In the cdns_i3c_master_probe function, &master->hj_work is bound with cdns_i3c_master_hj. And cdns_i3c_master_interrupt can call cnds_i3c_master_demux_ibis function to start the work. If we remove the module which will call cdns_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cdns_i3c_master_hj cdns_i3c_master_remove | i3c_master_unregister(&master->base) | device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in cdns_i3c_master_remove. Signed-off-by: Kaixin Wang <kxwang23(a)m.fudan.edu.cn> Link: https://lore.kernel.org/r/20240911153544.848398-1-kxwang23@m.fudan.edu.cn Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com> --- drivers/i3c/master/i3c-master-cdns.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c index 35b90bb686ad..c5a37f58079a 100644 --- a/drivers/i3c/master/i3c-master-cdns.c +++ b/drivers/i3c/master/i3c-master-cdns.c @@ -1667,6 +1667,7 @@ static int cdns_i3c_master_remove(struct platform_device *pdev) { struct cdns_i3c_master *master = platform_get_drvdata(pdev); + cancel_work_sync(&master->hj_work); i3c_master_unregister(&master->base); clk_disable_unprepare(master->sysclk); -- 2.25.1

9 months

2
1
0 0

[PATCH] Input: Fix error handling in input_register_device()

by Ma Ke

When device_add(&dev->dev) failed, calling put_device() to explicitly release dev->dev. Otherwise, it could cause double free problem. As comment of device_add() says, if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 0cd587735205 ("Input: preallocate memory to hold event values") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- drivers/input/input.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index 7f0477e04ad2..a0a36aa90ecc 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -2456,8 +2456,10 @@ int input_register_device(struct input_dev *dev) input_dev_poller_finalize(dev->poller); error = device_add(&dev->dev); - if (error) + if (error) { + put_device(&dev->dev); goto err_devres_free; + } path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL); pr_info("%s as %s\n", -- 2.25.1

9 months

2
1
0 0

[PATCH] hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode

by Muchun Song

hugetlb_file_setup() will pass a NULL @dir to hugetlbfs_get_inode(), so we will access a NULL pointer for @dir. Fix it and set __entry->dr to 0 if @dir is NULL. Because ->i_ino cannot be 0 (see get_next_ino()), there is no confusing if user sees a 0 inode number. Fixes: 318580ad7f28 ("hugetlbfs: support tracepoint") Cc: stable(a)vger.kernel.org Reported-by: Cheung Wall <zzqq0103.hey(a)gmail.com> Closes: https://lore.kernel.org/linux-mm/02858D60-43C1-4863-A84F-3C76A8AF1F15@linux… Signed-off-by: Muchun Song <songmuchun(a)bytedance.com> --- include/trace/events/hugetlbfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/trace/events/hugetlbfs.h b/include/trace/events/hugetlbfs.h index 8331c904a9ba8..59605dfaeeb43 100644 --- a/include/trace/events/hugetlbfs.h +++ b/include/trace/events/hugetlbfs.h @@ -23,7 +23,7 @@ TRACE_EVENT(hugetlbfs_alloc_inode, TP_fast_assign( __entry->dev = inode->i_sb->s_dev; __entry->ino = inode->i_ino; - __entry->dir = dir->i_ino; + __entry->dir = dir ? dir->i_ino : 0; __entry->mode = mode; ), -- 2.20.1

9 months

2
1
0 0

[REGRESSION] amdgpu: thinkpad e495 backlight brightness resets after suspend

by Siva Mahadevan

#regzbot introduced: 99a02eab8 Observed behaviour: linux-stable v6.12.5 has a regression on my thinkpad e495 where suspend/resume of the laptop results in my backlight brightness settings to be reset to some very high value. After resume, I'm able to increase brightness further until max brightness, but I'm not able to decrease it anymore. Behaviour prior to regression: linux-stable v6.12.4 correctly maintains the same brightness setting on the backlight that was set prior to suspend/resume. Notes: I bisected this issue between v6.12.4 and v6.12.5 to commit 99a02eab8 titled "drm/amdgpu: rework resume handling for display (v2)". Hardware: * lenovo thinkpad e495 * AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx * VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Picasso/Raven 2 [Radeon Vega Series / Radeon Vega Mobile Series] (rev c2)

9 months

3
4
0 0

[PATCH stable 6.6] bpf: support non-r10 register spill/fill to/from stack in precision tracking

by Shung-Hsi Yu

From: Andrii Nakryiko <andrii(a)kernel.org> [ Upstream commit 41f6f64e6999a837048b1bd13a2f8742964eca6b ] Use instruction (jump) history to record instructions that performed register spill/fill to/from stack, regardless if this was done through read-only r10 register, or any other register after copying r10 into it *and* potentially adjusting offset. To make this work reliably, we push extra per-instruction flags into instruction history, encoding stack slot index (spi) and stack frame number in extra 10 bit flags we take away from prev_idx in instruction history. We don't touch idx field for maximum performance, as it's checked most frequently during backtracking. This change removes basically the last remaining practical limitation of precision backtracking logic in BPF verifier. It fixes known deficiencies, but also opens up new opportunities to reduce number of verified states, explored in the subsequent patches. There are only three differences in selftests' BPF object files according to veristat, all in the positive direction (less states). File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) -------------------------------------- ------------- --------- --------- ------------- ---------- ---------- ------------- test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%) Note, I avoided renaming jmp_history to more generic insn_hist to minimize number of lines changed and potential merge conflicts between bpf and bpf-next trees. Notice also cur_hist_entry pointer reset to NULL at the beginning of instruction verification loop. This pointer avoids the problem of relying on last jump history entry's insn_idx to determine whether we already have entry for current instruction or not. It can happen that we added jump history entry because current instruction is_jmp_point(), but also we need to add instruction flags for stack access. In this case, we don't want to entries, so we need to reuse last added entry, if it is present. Relying on insn_idx comparison has the same ambiguity problem as the one that was fixed recently in [0], so we avoid that. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352… Acked-by: Eduard Zingerman <eddyz87(a)gmail.com> Reported-by: Tao Lyu <tao.lyu(a)epfl.ch> Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org> Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Shung-Hsi Yu <shung-hsi.yu(a)suse.com> --- This is a backport to fix CVE-2023-52920[1] 1: https://lore.kernel.org/linux-cve-announce/2024110518-CVE-2023-52920-17f6@g… --- include/linux/bpf_verifier.h | 33 +++- kernel/bpf/verifier.c | 175 ++++++++++-------- .../bpf/progs/verifier_subprog_precision.c | 23 ++- .../testing/selftests/bpf/verifier/precise.c | 38 ++-- 4 files changed, 170 insertions(+), 99 deletions(-) diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index 92919d52f7e1..cb8e97665eaa 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -319,12 +319,34 @@ struct bpf_func_state { struct bpf_stack_state *stack; }; -struct bpf_idx_pair { - u32 prev_idx; - u32 idx; +#define MAX_CALL_FRAMES 8 + +/* instruction history flags, used in bpf_jmp_history_entry.flags field */ +enum { + /* instruction references stack slot through PTR_TO_STACK register; + * we also store stack's frame number in lower 3 bits (MAX_CALL_FRAMES is 8) + * and accessed stack slot's index in next 6 bits (MAX_BPF_STACK is 512, + * 8 bytes per slot, so slot index (spi) is [0, 63]) + */ + INSN_F_FRAMENO_MASK = 0x7, /* 3 bits */ + + INSN_F_SPI_MASK = 0x3f, /* 6 bits */ + INSN_F_SPI_SHIFT = 3, /* shifted 3 bits to the left */ + + INSN_F_STACK_ACCESS = BIT(9), /* we need 10 bits total */ +}; + +static_assert(INSN_F_FRAMENO_MASK + 1 >= MAX_CALL_FRAMES); +static_assert(INSN_F_SPI_MASK + 1 >= MAX_BPF_STACK / 8); + +struct bpf_jmp_history_entry { + u32 idx; + /* insn idx can't be bigger than 1 million */ + u32 prev_idx : 22; + /* special flags, e.g., whether insn is doing register stack spill/load */ + u32 flags : 10; }; -#define MAX_CALL_FRAMES 8 /* Maximum number of register states that can exist at once */ #define BPF_ID_MAP_SIZE ((MAX_BPF_REG + MAX_BPF_STACK / BPF_REG_SIZE) * MAX_CALL_FRAMES) struct bpf_verifier_state { @@ -407,7 +429,7 @@ struct bpf_verifier_state { * For most states jmp_history_cnt is [0-3]. * For loops can go up to ~40. */ - struct bpf_idx_pair *jmp_history; + struct bpf_jmp_history_entry *jmp_history; u32 jmp_history_cnt; u32 dfs_depth; u32 callback_unroll_depth; @@ -640,6 +662,7 @@ struct bpf_verifier_env { int cur_stack; } cfg; struct backtrack_state bt; + struct bpf_jmp_history_entry *cur_hist_ent; u32 pass_cnt; /* number of times do_check() was called */ u32 subprog_cnt; /* number of instructions analyzed by the verifier */ diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 4f19a091571b..5ca02af3a872 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1762,8 +1762,8 @@ static int copy_verifier_state(struct bpf_verifier_state *dst_state, int i, err; dst_state->jmp_history = copy_array(dst_state->jmp_history, src->jmp_history, - src->jmp_history_cnt, sizeof(struct bpf_idx_pair), - GFP_USER); + src->jmp_history_cnt, sizeof(*dst_state->jmp_history), + GFP_USER); if (!dst_state->jmp_history) return -ENOMEM; dst_state->jmp_history_cnt = src->jmp_history_cnt; @@ -3397,6 +3397,21 @@ static int check_reg_arg(struct bpf_verifier_env *env, u32 regno, return __check_reg_arg(env, state->regs, regno, t); } +static int insn_stack_access_flags(int frameno, int spi) +{ + return INSN_F_STACK_ACCESS | (spi << INSN_F_SPI_SHIFT) | frameno; +} + +static int insn_stack_access_spi(int insn_flags) +{ + return (insn_flags >> INSN_F_SPI_SHIFT) & INSN_F_SPI_MASK; +} + +static int insn_stack_access_frameno(int insn_flags) +{ + return insn_flags & INSN_F_FRAMENO_MASK; +} + static void mark_jmp_point(struct bpf_verifier_env *env, int idx) { env->insn_aux_data[idx].jmp_point = true; @@ -3408,28 +3423,51 @@ static bool is_jmp_point(struct bpf_verifier_env *env, int insn_idx) } /* for any branch, call, exit record the history of jmps in the given state */ -static int push_jmp_history(struct bpf_verifier_env *env, - struct bpf_verifier_state *cur) +static int push_jmp_history(struct bpf_verifier_env *env, struct bpf_verifier_state *cur, + int insn_flags) { u32 cnt = cur->jmp_history_cnt; - struct bpf_idx_pair *p; + struct bpf_jmp_history_entry *p; size_t alloc_size; - if (!is_jmp_point(env, env->insn_idx)) + /* combine instruction flags if we already recorded this instruction */ + if (env->cur_hist_ent) { + /* atomic instructions push insn_flags twice, for READ and + * WRITE sides, but they should agree on stack slot + */ + WARN_ONCE((env->cur_hist_ent->flags & insn_flags) && + (env->cur_hist_ent->flags & insn_flags) != insn_flags, + "verifier insn history bug: insn_idx %d cur flags %x new flags %x\n", + env->insn_idx, env->cur_hist_ent->flags, insn_flags); + env->cur_hist_ent->flags |= insn_flags; return 0; + } cnt++; alloc_size = kmalloc_size_roundup(size_mul(cnt, sizeof(*p))); p = krealloc(cur->jmp_history, alloc_size, GFP_USER); if (!p) return -ENOMEM; - p[cnt - 1].idx = env->insn_idx; - p[cnt - 1].prev_idx = env->prev_insn_idx; cur->jmp_history = p; + + p = &cur->jmp_history[cnt - 1]; + p->idx = env->insn_idx; + p->prev_idx = env->prev_insn_idx; + p->flags = insn_flags; cur->jmp_history_cnt = cnt; + env->cur_hist_ent = p; + return 0; } +static struct bpf_jmp_history_entry *get_jmp_hist_entry(struct bpf_verifier_state *st, + u32 hist_end, int insn_idx) +{ + if (hist_end > 0 && st->jmp_history[hist_end - 1].idx == insn_idx) + return &st->jmp_history[hist_end - 1]; + return NULL; +} + /* Backtrack one insn at a time. If idx is not at the top of recorded * history then previous instruction came from straight line execution. * Return -ENOENT if we exhausted all instructions within given state. @@ -3591,9 +3629,14 @@ static inline bool bt_is_reg_set(struct backtrack_state *bt, u32 reg) return bt->reg_masks[bt->frame] & (1 << reg); } +static inline bool bt_is_frame_slot_set(struct backtrack_state *bt, u32 frame, u32 slot) +{ + return bt->stack_masks[frame] & (1ull << slot); +} + static inline bool bt_is_slot_set(struct backtrack_state *bt, u32 slot) { - return bt->stack_masks[bt->frame] & (1ull << slot); + return bt_is_frame_slot_set(bt, bt->frame, slot); } /* format registers bitmask, e.g., "r0,r2,r4" for 0x15 mask */ @@ -3647,7 +3690,7 @@ static bool calls_callback(struct bpf_verifier_env *env, int insn_idx); * - *was* processed previously during backtracking. */ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, - struct backtrack_state *bt) + struct bpf_jmp_history_entry *hist, struct backtrack_state *bt) { const struct bpf_insn_cbs cbs = { .cb_call = disasm_kfunc_name, @@ -3660,7 +3703,7 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, u8 mode = BPF_MODE(insn->code); u32 dreg = insn->dst_reg; u32 sreg = insn->src_reg; - u32 spi, i; + u32 spi, i, fr; if (insn->code == 0) return 0; @@ -3723,20 +3766,15 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, * by 'precise' mark in corresponding register of this state. * No further tracking necessary. */ - if (insn->src_reg != BPF_REG_FP) + if (!hist || !(hist->flags & INSN_F_STACK_ACCESS)) return 0; - /* dreg = *(u64 *)[fp - off] was a fill from the stack. * that [fp - off] slot contains scalar that needs to be * tracked with precision */ - spi = (-insn->off - 1) / BPF_REG_SIZE; - if (spi >= 64) { - verbose(env, "BUG spi %d\n", spi); - WARN_ONCE(1, "verifier backtracking bug"); - return -EFAULT; - } - bt_set_slot(bt, spi); + spi = insn_stack_access_spi(hist->flags); + fr = insn_stack_access_frameno(hist->flags); + bt_set_frame_slot(bt, fr, spi); } else if (class == BPF_STX || class == BPF_ST) { if (bt_is_reg_set(bt, dreg)) /* stx & st shouldn't be using _scalar_ dst_reg @@ -3745,17 +3783,13 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, */ return -ENOTSUPP; /* scalars can only be spilled into stack */ - if (insn->dst_reg != BPF_REG_FP) + if (!hist || !(hist->flags & INSN_F_STACK_ACCESS)) return 0; - spi = (-insn->off - 1) / BPF_REG_SIZE; - if (spi >= 64) { - verbose(env, "BUG spi %d\n", spi); - WARN_ONCE(1, "verifier backtracking bug"); - return -EFAULT; - } - if (!bt_is_slot_set(bt, spi)) + spi = insn_stack_access_spi(hist->flags); + fr = insn_stack_access_frameno(hist->flags); + if (!bt_is_frame_slot_set(bt, fr, spi)) return 0; - bt_clear_slot(bt, spi); + bt_clear_frame_slot(bt, fr, spi); if (class == BPF_STX) bt_set_reg(bt, sreg); } else if (class == BPF_JMP || class == BPF_JMP32) { @@ -3799,10 +3833,14 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, WARN_ONCE(1, "verifier backtracking bug"); return -EFAULT; } - /* we don't track register spills perfectly, - * so fallback to force-precise instead of failing */ - if (bt_stack_mask(bt) != 0) - return -ENOTSUPP; + /* we are now tracking register spills correctly, + * so any instance of leftover slots is a bug + */ + if (bt_stack_mask(bt) != 0) { + verbose(env, "BUG stack slots %llx\n", bt_stack_mask(bt)); + WARN_ONCE(1, "verifier backtracking bug (subprog leftover stack slots)"); + return -EFAULT; + } /* propagate r1-r5 to the caller */ for (i = BPF_REG_1; i <= BPF_REG_5; i++) { if (bt_is_reg_set(bt, i)) { @@ -3827,8 +3865,11 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, WARN_ONCE(1, "verifier backtracking bug"); return -EFAULT; } - if (bt_stack_mask(bt) != 0) - return -ENOTSUPP; + if (bt_stack_mask(bt) != 0) { + verbose(env, "BUG stack slots %llx\n", bt_stack_mask(bt)); + WARN_ONCE(1, "verifier backtracking bug (callback leftover stack slots)"); + return -EFAULT; + } /* clear r1-r5 in callback subprog's mask */ for (i = BPF_REG_1; i <= BPF_REG_5; i++) bt_clear_reg(bt, i); @@ -4265,6 +4306,7 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno) for (;;) { DECLARE_BITMAP(mask, 64); u32 history = st->jmp_history_cnt; + struct bpf_jmp_history_entry *hist; if (env->log.level & BPF_LOG_LEVEL2) { verbose(env, "mark_precise: frame%d: last_idx %d first_idx %d subseq_idx %d \n", @@ -4328,7 +4370,8 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno) err = 0; skip_first = false; } else { - err = backtrack_insn(env, i, subseq_idx, bt); + hist = get_jmp_hist_entry(st, history, i); + err = backtrack_insn(env, i, subseq_idx, hist, bt); } if (err == -ENOTSUPP) { mark_all_scalars_precise(env, env->cur_state); @@ -4381,22 +4424,10 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno) bitmap_from_u64(mask, bt_frame_stack_mask(bt, fr)); for_each_set_bit(i, mask, 64) { if (i >= func->allocated_stack / BPF_REG_SIZE) { - /* the sequence of instructions: - * 2: (bf) r3 = r10 - * 3: (7b) *(u64 *)(r3 -8) = r0 - * 4: (79) r4 = *(u64 *)(r10 -8) - * doesn't contain jmps. It's backtracked - * as a single block. - * During backtracking insn 3 is not recognized as - * stack access, so at the end of backtracking - * stack slot fp-8 is still marked in stack_mask. - * However the parent state may not have accessed - * fp-8 and it's "unallocated" stack space. - * In such case fallback to conservative. - */ - mark_all_scalars_precise(env, env->cur_state); - bt_reset(bt); - return 0; + verbose(env, "BUG backtracking (stack slot %d, total slots %d)\n", + i, func->allocated_stack / BPF_REG_SIZE); + WARN_ONCE(1, "verifier backtracking bug (stack slot out of bounds)"); + return -EFAULT; } if (!is_spilled_scalar_reg(&func->stack[i])) { @@ -4561,7 +4592,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env, int i, slot = -off - 1, spi = slot / BPF_REG_SIZE, err; struct bpf_insn *insn = &env->prog->insnsi[insn_idx]; struct bpf_reg_state *reg = NULL; - u32 dst_reg = insn->dst_reg; + int insn_flags = insn_stack_access_flags(state->frameno, spi); /* caller checked that off % size == 0 and -MAX_BPF_STACK <= off < 0, * so it's aligned access and [off, off + size) are within stack limits @@ -4599,17 +4630,6 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env, mark_stack_slot_scratched(env, spi); if (reg && !(off % BPF_REG_SIZE) && register_is_bounded(reg) && !register_is_null(reg) && env->bpf_capable) { - if (dst_reg != BPF_REG_FP) { - /* The backtracking logic can only recognize explicit - * stack slot address like [fp - 8]. Other spill of - * scalar via different register has to be conservative. - * Backtrack from here and mark all registers as precise - * that contributed into 'reg' being a constant. - */ - err = mark_chain_precision(env, value_regno); - if (err) - return err; - } save_register_state(state, spi, reg, size); /* Break the relation on a narrowing spill. */ if (fls64(reg->umax_value) > BITS_PER_BYTE * size) @@ -4621,6 +4641,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env, __mark_reg_known(&fake_reg, insn->imm); fake_reg.type = SCALAR_VALUE; save_register_state(state, spi, &fake_reg, size); + insn_flags = 0; /* not a register spill */ } else if (reg && is_spillable_regtype(reg->type)) { /* register containing pointer is being spilled into stack */ if (size != BPF_REG_SIZE) { @@ -4666,9 +4687,12 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env, /* Mark slots affected by this stack write. */ for (i = 0; i < size; i++) - state->stack[spi].slot_type[(slot - i) % BPF_REG_SIZE] = - type; + state->stack[spi].slot_type[(slot - i) % BPF_REG_SIZE] = type; + insn_flags = 0; /* not a register spill */ } + + if (insn_flags) + return push_jmp_history(env, env->cur_state, insn_flags); return 0; } @@ -4857,6 +4881,7 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env, int i, slot = -off - 1, spi = slot / BPF_REG_SIZE; struct bpf_reg_state *reg; u8 *stype, type; + int insn_flags = insn_stack_access_flags(reg_state->frameno, spi); stype = reg_state->stack[spi].slot_type; reg = &reg_state->stack[spi].spilled_ptr; @@ -4902,12 +4927,10 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env, return -EACCES; } mark_reg_unknown(env, state->regs, dst_regno); + insn_flags = 0; /* not restoring original register state */ } state->regs[dst_regno].live |= REG_LIVE_WRITTEN; - return 0; - } - - if (dst_regno >= 0) { + } else if (dst_regno >= 0) { /* restore register state from stack */ copy_register_state(&state->regs[dst_regno], reg); /* mark reg as written since spilled pointer state likely @@ -4943,7 +4966,10 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env, mark_reg_read(env, reg, reg->parent, REG_LIVE_READ64); if (dst_regno >= 0) mark_reg_stack_read(env, reg_state, off, off + size, dst_regno); + insn_flags = 0; /* we are not restoring spilled register */ } + if (insn_flags) + return push_jmp_history(env, env->cur_state, insn_flags); return 0; } @@ -7027,7 +7053,6 @@ static int check_atomic(struct bpf_verifier_env *env, int insn_idx, struct bpf_i BPF_SIZE(insn->code), BPF_WRITE, -1, true, false); if (err) return err; - return 0; } @@ -16773,7 +16798,8 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx) * the precision needs to be propagated back in * the current state. */ - err = err ? : push_jmp_history(env, cur); + if (is_jmp_point(env, env->insn_idx)) + err = err ? : push_jmp_history(env, cur, 0); err = err ? : propagate_precision(env, &sl->state); if (err) return err; @@ -16997,6 +17023,9 @@ static int do_check(struct bpf_verifier_env *env) u8 class; int err; + /* reset current history entry on each new instruction */ + env->cur_hist_ent = NULL; + env->prev_insn_idx = prev_insn_idx; if (env->insn_idx >= insn_cnt) { verbose(env, "invalid insn idx %d insn_cnt %d\n", @@ -17036,7 +17065,7 @@ static int do_check(struct bpf_verifier_env *env) } if (is_jmp_point(env, env->insn_idx)) { - err = push_jmp_history(env, state); + err = push_jmp_history(env, state, 0); if (err) return err; } diff --git a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c index f61d623b1ce8..f87365f7599b 100644 --- a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c +++ b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c @@ -541,11 +541,24 @@ static __u64 subprog_spill_reg_precise(void) SEC("?raw_tp") __success __log_level(2) -/* precision backtracking can't currently handle stack access not through r10, - * so we won't be able to mark stack slot fp-8 as precise, and so will - * fallback to forcing all as precise - */ -__msg("mark_precise: frame0: falling back to forcing all scalars precise") +__msg("10: (0f) r1 += r7") +__msg("mark_precise: frame0: last_idx 10 first_idx 7 subseq_idx -1") +__msg("mark_precise: frame0: regs=r7 stack= before 9: (bf) r1 = r8") +__msg("mark_precise: frame0: regs=r7 stack= before 8: (27) r7 *= 4") +__msg("mark_precise: frame0: regs=r7 stack= before 7: (79) r7 = *(u64 *)(r10 -8)") +__msg("mark_precise: frame0: parent state regs= stack=-8: R0_w=2 R6_w=1 R8_rw=map_value(map=.data.vals,ks=4,vs=16) R10=fp0 fp-8_rw=P1") +__msg("mark_precise: frame0: last_idx 18 first_idx 0 subseq_idx 7") +__msg("mark_precise: frame0: regs= stack=-8 before 18: (95) exit") +__msg("mark_precise: frame1: regs= stack= before 17: (0f) r0 += r2") +__msg("mark_precise: frame1: regs= stack= before 16: (79) r2 = *(u64 *)(r1 +0)") +__msg("mark_precise: frame1: regs= stack= before 15: (79) r0 = *(u64 *)(r10 -16)") +__msg("mark_precise: frame1: regs= stack= before 14: (7b) *(u64 *)(r10 -16) = r2") +__msg("mark_precise: frame1: regs= stack= before 13: (7b) *(u64 *)(r1 +0) = r2") +__msg("mark_precise: frame1: regs=r2 stack= before 6: (85) call pc+6") +__msg("mark_precise: frame0: regs=r2 stack= before 5: (bf) r2 = r6") +__msg("mark_precise: frame0: regs=r6 stack= before 4: (07) r1 += -8") +__msg("mark_precise: frame0: regs=r6 stack= before 3: (bf) r1 = r10") +__msg("mark_precise: frame0: regs=r6 stack= before 2: (b7) r6 = 1") __naked int subprog_spill_into_parent_stack_slot_precise(void) { asm volatile ( diff --git a/tools/testing/selftests/bpf/verifier/precise.c b/tools/testing/selftests/bpf/verifier/precise.c index 0d84dd1f38b6..8a2ff81d8350 100644 --- a/tools/testing/selftests/bpf/verifier/precise.c +++ b/tools/testing/selftests/bpf/verifier/precise.c @@ -140,10 +140,11 @@ .result = REJECT, }, { - "precise: ST insn causing spi > allocated_stack", + "precise: ST zero to stack insn is supported", .insns = { BPF_MOV64_REG(BPF_REG_3, BPF_REG_10), BPF_JMP_IMM(BPF_JNE, BPF_REG_3, 123, 0), + /* not a register spill, so we stop precision propagation for R4 here */ BPF_ST_MEM(BPF_DW, BPF_REG_3, -8, 0), BPF_LDX_MEM(BPF_DW, BPF_REG_4, BPF_REG_10, -8), BPF_MOV64_IMM(BPF_REG_0, -1), @@ -157,11 +158,11 @@ mark_precise: frame0: last_idx 4 first_idx 2\ mark_precise: frame0: regs=r4 stack= before 4\ mark_precise: frame0: regs=r4 stack= before 3\ - mark_precise: frame0: regs= stack=-8 before 2\ - mark_precise: frame0: falling back to forcing all scalars precise\ - force_precise: frame0: forcing r0 to be precise\ mark_precise: frame0: last_idx 5 first_idx 5\ - mark_precise: frame0: parent state regs= stack=:", + mark_precise: frame0: parent state regs=r0 stack=:\ + mark_precise: frame0: last_idx 4 first_idx 2\ + mark_precise: frame0: regs=r0 stack= before 4\ + 5: R0=-1 R4=0", .result = VERBOSE_ACCEPT, .retval = -1, }, @@ -169,6 +170,8 @@ "precise: STX insn causing spi > allocated_stack", .insns = { BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_get_prandom_u32), + /* make later reg spill more interesting by having somewhat known scalar */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 0xff), BPF_MOV64_REG(BPF_REG_3, BPF_REG_10), BPF_JMP_IMM(BPF_JNE, BPF_REG_3, 123, 0), BPF_STX_MEM(BPF_DW, BPF_REG_3, BPF_REG_0, -8), @@ -179,18 +182,21 @@ }, .prog_type = BPF_PROG_TYPE_XDP, .flags = BPF_F_TEST_STATE_FREQ, - .errstr = "mark_precise: frame0: last_idx 6 first_idx 6\ + .errstr = "mark_precise: frame0: last_idx 7 first_idx 7\ mark_precise: frame0: parent state regs=r4 stack=:\ - mark_precise: frame0: last_idx 5 first_idx 3\ - mark_precise: frame0: regs=r4 stack= before 5\ - mark_precise: frame0: regs=r4 stack= before 4\ - mark_precise: frame0: regs= stack=-8 before 3\ - mark_precise: frame0: falling back to forcing all scalars precise\ - force_precise: frame0: forcing r0 to be precise\ - force_precise: frame0: forcing r0 to be precise\ - force_precise: frame0: forcing r0 to be precise\ - force_precise: frame0: forcing r0 to be precise\ - mark_precise: frame0: last_idx 6 first_idx 6\ + mark_precise: frame0: last_idx 6 first_idx 4\ + mark_precise: frame0: regs=r4 stack= before 6: (b7) r0 = -1\ + mark_precise: frame0: regs=r4 stack= before 5: (79) r4 = *(u64 *)(r10 -8)\ + mark_precise: frame0: regs= stack=-8 before 4: (7b) *(u64 *)(r3 -8) = r0\ + mark_precise: frame0: parent state regs=r0 stack=:\ + mark_precise: frame0: last_idx 3 first_idx 3\ + mark_precise: frame0: regs=r0 stack= before 3: (55) if r3 != 0x7b goto pc+0\ + mark_precise: frame0: regs=r0 stack= before 2: (bf) r3 = r10\ + mark_precise: frame0: regs=r0 stack= before 1: (57) r0 &= 255\ + mark_precise: frame0: parent state regs=r0 stack=:\ + mark_precise: frame0: last_idx 0 first_idx 0\ + mark_precise: frame0: regs=r0 stack= before 0: (85) call bpf_get_prandom_u32#7\ + mark_precise: frame0: last_idx 7 first_idx 7\ mark_precise: frame0: parent state regs= stack=:", .result = VERBOSE_ACCEPT, .retval = -1, -- 2.47.0

9 months

3
5
0 0

[PATCH] PCI: fix reference leak in pci_register_host_bridge()

by Ma Ke

Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it could cause memory leak. device_register() includes device_add(). As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- drivers/pci/probe.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2e81ab0f5a25..73464ffbb0fc 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -974,8 +974,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge) name = dev_name(&bus->dev); err = device_register(&bus->dev); - if (err) + if (err) { + put_device(&bus->dev); goto unregister; + } pcibios_add_bus(bus); -- 2.25.1

9 months

2
1
0 0

[PATCH v2, 2/2] usb: typec: tcpm: fix the sender response time issue

by joswang

From: Jos Wang <joswang(a)lenovo.com> According to the USB PD3 CTS specification (https://usb.org/document-library/ usb-power-delivery-compliance-test-specification-0/ USB_PD3_CTS_Q4_2024_OR.zip), the requirements for tSenderResponse are different in PD2 and PD3 modes, see Table 19 Timing Table & Calculations. For PD2 mode, the tSenderResponse min 24ms and max 30ms; for PD3 mode, the tSenderResponse min 27ms and max 33ms. For the "TEST.PD.PROT.SRC.2 Get_Source_Cap No Request" test item, after receiving the Source_Capabilities Message sent by the UUT, the tester deliberately does not send a Request Message in order to force the SenderResponse timer on the Source UUT to timeout. The Tester checks that a Hard Reset is detected between tSenderResponse min and max，the delay is between the last bit of the GoodCRC Message EOP has been sent and the first bit of Hard Reset SOP has been received. The current code does not distinguish between PD2 and PD3 modes, and tSenderResponse defaults to 60ms. This will cause this test item and the following tests to fail: TEST.PD.PROT.SRC3.2 SenderResponseTimer Timeout TEST.PD.PROT.SNK.6 SenderResponseTimer Timeout Considering factors such as SOC performance, i2c rate, and the speed of PD chip sending data, "pd2-sender-response-time-ms" and "pd3-sender-response-time-ms" DT time properties are added to allow users to define platform timing. For values that have not been explicitly defined in DT using this property, a default value of 27ms for PD2 tSenderResponse and 30ms for PD3 tSenderResponse is set. Fixes: 2eadc33f40d4 ("typec: tcpm: Add core support for sink side PPS") Cc: stable(a)vger.kernel.org Signed-off-by: Jos Wang <joswang(a)lenovo.com> --- v1 -> v2: - modify the commit message - patch 1/2 and patch 2/2 are placed in the same thread drivers/usb/typec/tcpm/tcpm.c | 50 +++++++++++++++++++++++------------ include/linux/usb/pd.h | 3 ++- 2 files changed, 35 insertions(+), 18 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 6021eeb903fe..3a159bfcf382 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -314,12 +314,16 @@ struct pd_data { * @sink_wait_cap_time: Deadline (in ms) for tTypeCSinkWaitCap timer * @ps_src_wait_off_time: Deadline (in ms) for tPSSourceOff timer * @cc_debounce_time: Deadline (in ms) for tCCDebounce timer + * @pd2_sender_response_time: Deadline (in ms) for pd20 tSenderResponse timer + * @pd3_sender_response_time: Deadline (in ms) for pd30 tSenderResponse timer */ struct pd_timings { u32 sink_wait_cap_time; u32 ps_src_off_time; u32 cc_debounce_time; u32 snk_bc12_cmpletion_time; + u32 pd2_sender_response_time; + u32 pd3_sender_response_time; }; struct tcpm_port { @@ -3776,7 +3780,9 @@ static bool tcpm_send_queued_message(struct tcpm_port *port) } else if (port->pwr_role == TYPEC_SOURCE) { tcpm_ams_finish(port); tcpm_set_state(port, HARD_RESET_SEND, - PD_T_SENDER_RESPONSE); + port->negotiated_rev >= PD_REV30 ? + port->timings.pd3_sender_response_time : + port->timings.pd2_sender_response_time); } else { tcpm_ams_finish(port); } @@ -4619,6 +4625,9 @@ static void run_state_machine(struct tcpm_port *port) enum typec_pwr_opmode opmode; unsigned int msecs; enum tcpm_state upcoming_state; + u32 sender_response_time = port->negotiated_rev >= PD_REV30 ? + port->timings.pd3_sender_response_time : + port->timings.pd2_sender_response_time; if (port->tcpc->check_contaminant && port->state != CHECK_CONTAMINANT) port->potential_contaminant = ((port->enter_state == SRC_ATTACH_WAIT && @@ -5113,7 +5122,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); } else { tcpm_set_state_cond(port, hard_reset_state(port), - PD_T_SENDER_RESPONSE); + sender_response_time); } break; case SNK_NEGOTIATE_PPS_CAPABILITIES: @@ -5135,7 +5144,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, SNK_READY, 0); } else { tcpm_set_state_cond(port, hard_reset_state(port), - PD_T_SENDER_RESPONSE); + sender_response_time); } break; case SNK_TRANSITION_SINK: @@ -5387,7 +5396,7 @@ static void run_state_machine(struct tcpm_port *port) port->message_id_prime = 0; port->rx_msgid_prime = -1; tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP_PRIME); - tcpm_set_state_cond(port, ready_state(port), PD_T_SENDER_RESPONSE); + tcpm_set_state_cond(port, ready_state(port), sender_response_time); } else { port->message_id = 0; port->rx_msgid = -1; @@ -5398,7 +5407,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state_cond(port, hard_reset_state(port), 0); else tcpm_set_state_cond(port, hard_reset_state(port), - PD_T_SENDER_RESPONSE); + sender_response_time); } break; @@ -5409,8 +5418,7 @@ static void run_state_machine(struct tcpm_port *port) port->send_discover = true; port->send_discover_prime = false; } - tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT, - PD_T_SENDER_RESPONSE); + tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT, sender_response_time); break; case DR_SWAP_ACCEPT: tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP); @@ -5444,7 +5452,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, ERROR_RECOVERY, 0); break; } - tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); + tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, sender_response_time); break; case FR_SWAP_SEND_TIMEOUT: tcpm_set_state(port, ERROR_RECOVERY, 0); @@ -5475,8 +5483,7 @@ static void run_state_machine(struct tcpm_port *port) break; case PR_SWAP_SEND: tcpm_pd_send_control(port, PD_CTRL_PR_SWAP, TCPC_TX_SOP); - tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT, - PD_T_SENDER_RESPONSE); + tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT, sender_response_time); break; case PR_SWAP_SEND_TIMEOUT: tcpm_swap_complete(port, -ETIMEDOUT); @@ -5574,8 +5581,7 @@ static void run_state_machine(struct tcpm_port *port) break; case VCONN_SWAP_SEND: tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP, TCPC_TX_SOP); - tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT, - PD_T_SENDER_RESPONSE); + tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT, sender_response_time); break; case VCONN_SWAP_SEND_TIMEOUT: tcpm_swap_complete(port, -ETIMEDOUT); @@ -5656,23 +5662,21 @@ static void run_state_machine(struct tcpm_port *port) break; case GET_STATUS_SEND: tcpm_pd_send_control(port, PD_CTRL_GET_STATUS, TCPC_TX_SOP); - tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT, - PD_T_SENDER_RESPONSE); + tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT, sender_response_time); break; case GET_STATUS_SEND_TIMEOUT: tcpm_set_state(port, ready_state(port), 0); break; case GET_PPS_STATUS_SEND: tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS, TCPC_TX_SOP); - tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT, - PD_T_SENDER_RESPONSE); + tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT, sender_response_time); break; case GET_PPS_STATUS_SEND_TIMEOUT: tcpm_set_state(port, ready_state(port), 0); break; case GET_SINK_CAP: tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP, TCPC_TX_SOP); - tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE); + tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, sender_response_time); break; case GET_SINK_CAP_TIMEOUT: port->sink_cap_done = true; @@ -7109,6 +7113,18 @@ static void tcpm_fw_get_timings(struct tcpm_port *port, struct fwnode_handle *fw ret = fwnode_property_read_u32(fwnode, "sink-bc12-completion-time-ms", &val); if (!ret) port->timings.snk_bc12_cmpletion_time = val; + + ret = fwnode_property_read_u32(fwnode, "pd2-sender-response-time-ms", &val); + if (!ret) + port->timings.pd2_sender_response_time = val; + else + port->timings.pd2_sender_response_time = PD_T_PD2_SENDER_RESPONSE; + + ret = fwnode_property_read_u32(fwnode, "pd3-sender-response-time-ms", &val); + if (!ret) + port->timings.pd3_sender_response_time = val; + else + port->timings.pd3_sender_response_time = PD_T_PD3_SENDER_RESPONSE; } static int tcpm_fw_get_caps(struct tcpm_port *port, struct fwnode_handle *fwnode) diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index d50098fb16b5..9c599e851b9a 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -457,7 +457,6 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_NO_RESPONSE 5000 /* 4.5 - 5.5 seconds */ #define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ #define PD_T_SEND_SOURCE_CAP 150 /* 100 - 200 ms */ -#define PD_T_SENDER_RESPONSE 60 /* 24 - 30 ms, relaxed */ #define PD_T_RECEIVER_RESPONSE 15 /* 15ms max */ #define PD_T_SOURCE_ACTIVITY 45 #define PD_T_SINK_ACTIVITY 135 @@ -491,6 +490,8 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_CC_DEBOUNCE 200 /* 100 - 200 ms */ #define PD_T_PD_DEBOUNCE 20 /* 10 - 20 ms */ #define PD_T_TRY_CC_DEBOUNCE 15 /* 10 - 20 ms */ +#define PD_T_PD2_SENDER_RESPONSE 27 /* PD20 spec 24 - 30 ms */ +#define PD_T_PD3_SENDER_RESPONSE 30 /* PD30 spec 27 - 33 ms */ #define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP) #define PD_N_HARD_RESET_COUNT 2 -- 2.17.1

9 months

3
7
0 0

[PATCH] [ARM] fix reference leak in locomo_init_one_child()

by Ma Ke

Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it could cause memory leak. device_register() includes device_add(). As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- arch/arm/common/locomo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index cb6ef449b987..7274010218ec 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -255,6 +255,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) ret = device_register(&dev->dev); if (ret) { + put_device(&dev->dev); out: kfree(dev); } -- 2.25.1

9 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2025