Hi stable folks,
Please apply commit 2f13daee2a72 ("lib/crypto/curve25519-hacl64: Disable
KASAN with clang-17 and older") to 6.12 (and possibly 6.6), as upstream
commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing") was
backported to those trees, introducing the warning for at least 6.12. It
applies cleanly for me. If there are any issues, please let me know.
Cheers,
Nathan
[Upstream commit ba0c67d3c4b0ce5ec5e6de35e6433b22eecb1f6a]
All firmware for the Lemans platform aka QCS9100 aka QCS9075 is for
historical reasons located in the qcom/sa8775p/ subdir inside
linux-firmware. The only exceptions to this rule are audio topology
files. While it's not too late, change the subdir to point to the
sa8775p/ subdir, so that all firmware for that platform is present at
the same location.
Fixes: 5b5bf5922f4c ("ASoC: qcom: sc8280xp: Add sound card support for QCS9100 and QCS9075")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla(a)oss.qualcomm.com>
Link: https://patch.msgid.link/20250924-lemans-evk-topo-v2-1-7d44909a5758@oss.qua…
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)oss.qualcomm.com>
---
sound/soc/qcom/sc8280xp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
index 288ccd7f8866..6847ae4acbd1 100644
--- a/sound/soc/qcom/sc8280xp.c
+++ b/sound/soc/qcom/sc8280xp.c
@@ -191,8 +191,8 @@ static const struct of_device_id snd_sc8280xp_dt_match[] = {
{.compatible = "qcom,qcm6490-idp-sndcard", "qcm6490"},
{.compatible = "qcom,qcs6490-rb3gen2-sndcard", "qcs6490"},
{.compatible = "qcom,qcs8275-sndcard", "qcs8300"},
- {.compatible = "qcom,qcs9075-sndcard", "qcs9075"},
- {.compatible = "qcom,qcs9100-sndcard", "qcs9100"},
+ {.compatible = "qcom,qcs9075-sndcard", "sa8775p"},
+ {.compatible = "qcom,qcs9100-sndcard", "sa8775p"},
{.compatible = "qcom,sc8280xp-sndcard", "sc8280xp"},
{.compatible = "qcom,sm8450-sndcard", "sm8450"},
{.compatible = "qcom,sm8550-sndcard", "sm8550"},
--
2.47.3
On all platforms set_clock_selection() writes to a GRF register. This
requires certain clocks running and thus should happen before the
clocks are disabled.
This has been noticed on RK3576 Sige5, which hangs during system suspend
when trying to suspend the second network interface. Note, that
suspending the first interface works, because the second device ensures
that the necessary clocks for the GRF are enabled.
Cc: stable(a)vger.kernel.org
Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 51ea0caf16c1..0786816e05f0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1446,14 +1446,15 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
}
} else {
if (bsp_priv->clk_enabled) {
+ if (bsp_priv->ops && bsp_priv->ops->set_clock_selection) {
+ bsp_priv->ops->set_clock_selection(bsp_priv,
+ bsp_priv->clock_input, false);
+ }
+
clk_bulk_disable_unprepare(bsp_priv->num_clks,
bsp_priv->clks);
clk_disable_unprepare(bsp_priv->clk_phy);
- if (bsp_priv->ops && bsp_priv->ops->set_clock_selection)
- bsp_priv->ops->set_clock_selection(bsp_priv,
- bsp_priv->clock_input, false);
-
bsp_priv->clk_enabled = false;
}
}
---
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
change-id: 20251014-rockchip-network-clock-fix-2c7069a6b6ec
Best regards,
--
Sebastian Reichel <sebastian.reichel(a)collabora.com>
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x f620d66af3165838bfa845dcf9f5f9b4089bf508
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101645-unplanned-pointy-70c8@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f620d66af3165838bfa845dcf9f5f9b4089bf508 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas(a)arm.com>
Date: Wed, 24 Sep 2025 13:31:22 +0100
Subject: [PATCH] arm64: mte: Do not flag the zero page as PG_mte_tagged
Commit 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fccd "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com>
Fixes: 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2(a)arm.com>
Cc: stable(a)vger.kernel.org # 5.10.x
Cc: Will Deacon <will(a)kernel.org>
Cc: David Hildenbrand <david(a)redhat.com>
Cc: Lance Yang <lance.yang(a)linux.dev>
Acked-by: Lance Yang <lance.yang(a)linux.dev>
Reviewed-by: David Hildenbrand <david(a)redhat.com>
Tested-by: Lance Yang <lance.yang(a)linux.dev>
Signed-off-by: Will Deacon <will(a)kernel.org>
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index ecb83ab0700e..7345987a50a0 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -2303,17 +2303,21 @@ static void bti_enable(const struct arm64_cpu_capabilities *__unused)
#ifdef CONFIG_ARM64_MTE
static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
{
+ static bool cleared_zero_page = false;
+
sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0);
mte_cpu_setup();
/*
* Clear the tags in the zero page. This needs to be done via the
- * linear map which has the Tagged attribute.
+ * linear map which has the Tagged attribute. Since this page is
+ * always mapped as pte_special(), set_pte_at() will not attempt to
+ * clear the tags or set PG_mte_tagged.
*/
- if (try_page_mte_tagging(ZERO_PAGE(0))) {
+ if (!cleared_zero_page) {
+ cleared_zero_page = true;
mte_clear_page_tags(lm_alias(empty_zero_page));
- set_page_mte_tagged(ZERO_PAGE(0));
}
kasan_init_hw_tags_cpu();
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index e5e773844889..63aed49ac181 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -460,7 +460,7 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
if (folio_test_hugetlb(folio))
WARN_ON_ONCE(!folio_test_hugetlb_mte_tagged(folio));
else
- WARN_ON_ONCE(!page_mte_tagged(page));
+ WARN_ON_ONCE(!page_mte_tagged(page) && !is_zero_page(page));
/* limit access to the end of the page */
offset = offset_in_page(addr);
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x f620d66af3165838bfa845dcf9f5f9b4089bf508
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101645-blissful-snagged-feca@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f620d66af3165838bfa845dcf9f5f9b4089bf508 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas(a)arm.com>
Date: Wed, 24 Sep 2025 13:31:22 +0100
Subject: [PATCH] arm64: mte: Do not flag the zero page as PG_mte_tagged
Commit 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fccd "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com>
Fixes: 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2(a)arm.com>
Cc: stable(a)vger.kernel.org # 5.10.x
Cc: Will Deacon <will(a)kernel.org>
Cc: David Hildenbrand <david(a)redhat.com>
Cc: Lance Yang <lance.yang(a)linux.dev>
Acked-by: Lance Yang <lance.yang(a)linux.dev>
Reviewed-by: David Hildenbrand <david(a)redhat.com>
Tested-by: Lance Yang <lance.yang(a)linux.dev>
Signed-off-by: Will Deacon <will(a)kernel.org>
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index ecb83ab0700e..7345987a50a0 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -2303,17 +2303,21 @@ static void bti_enable(const struct arm64_cpu_capabilities *__unused)
#ifdef CONFIG_ARM64_MTE
static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
{
+ static bool cleared_zero_page = false;
+
sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0);
mte_cpu_setup();
/*
* Clear the tags in the zero page. This needs to be done via the
- * linear map which has the Tagged attribute.
+ * linear map which has the Tagged attribute. Since this page is
+ * always mapped as pte_special(), set_pte_at() will not attempt to
+ * clear the tags or set PG_mte_tagged.
*/
- if (try_page_mte_tagging(ZERO_PAGE(0))) {
+ if (!cleared_zero_page) {
+ cleared_zero_page = true;
mte_clear_page_tags(lm_alias(empty_zero_page));
- set_page_mte_tagged(ZERO_PAGE(0));
}
kasan_init_hw_tags_cpu();
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index e5e773844889..63aed49ac181 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -460,7 +460,7 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
if (folio_test_hugetlb(folio))
WARN_ON_ONCE(!folio_test_hugetlb_mte_tagged(folio));
else
- WARN_ON_ONCE(!page_mte_tagged(page));
+ WARN_ON_ONCE(!page_mte_tagged(page) && !is_zero_page(page));
/* limit access to the end of the page */
offset = offset_in_page(addr);