October 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] media: tuner: xc5000: Fix use-after-free in xc5000_release

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 40b7a19f321e65789612ebaca966472055dab48c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025100338-ambulance-swaddling-4b2b@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40b7a19f321e65789612ebaca966472055dab48c Mon Sep 17 00:00:00 2001 From: Duoming Zhou <duoming(a)zju.edu.cn> Date: Wed, 17 Sep 2025 17:56:08 +0800 Subject: [PATCH] media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated. A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was initially identified through static analysis. Fixes: f7a27ff1fb77 ("[media] xc5000: delay tuner sleep to 5 seconds") Cc: stable(a)vger.kernel.org Signed-off-by: Duoming Zhou <duoming(a)zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> [hverkuil: fix typo in Subject: tunner -> tuner] diff --git a/drivers/media/tuners/xc5000.c b/drivers/media/tuners/xc5000.c index bf4ff461e082..a28481edd22e 100644 --- a/drivers/media/tuners/xc5000.c +++ b/drivers/media/tuners/xc5000.c @@ -1304,7 +1304,7 @@ static void xc5000_release(struct dvb_frontend *fe) mutex_lock(&xc5000_list_mutex); if (priv) { - cancel_delayed_work(&priv->timer_sleep); + cancel_delayed_work_sync(&priv->timer_sleep); hybrid_tuner_release_state(priv); }

3 weeks, 4 days

2
2
0 0

S/PDIF not detected anymore / regression on recent kernel 6.7 ?

by Serge SIMON

Dear Kernel maintainers, I think i'm encountering (for the first time in years !) a regression with the "6.7.arch3-1" kernel (whereas no issues with "6.6.10.arch1-1", on which i reverted). I'm running a (up-to-date, and non-LTS) ARCHLINUX desktop, on a ASUS B560-I motherboard, with 3 monitors (attached to a 4-HDMI outputs card), plus an audio S/PDIF optic output at motherboard level. With the latest kernel, the S/PIDF optic output of the motherboard is NOT detected anymore (and i haven't been able to see / find anything in the logs at quick glance, neither journalctl -xe nor dmesg). Once reverted to 6.6.10, everything is fine again. For example, in a working situation (6.6.10), i have : cat /proc/asound/pcm 00-00: ALC1220 Analog : ALC1220 Analog : playback 1 : capture 1 00-01: ALC1220 Digital : ALC1220 Digital : playback 1 00-02: ALC1220 Alt Analog : ALC1220 Alt Analog : capture 1 01-03: HDMI 0 : HDMI 0 : playback 1 01-07: HDMI 1 : HDMI 1 : playback 1 01-08: HDMI 2 : HDMI 2 : playback 1 01-09: HDMI 3 : HDMI 3 : playback 1 Whereas while on the latest 6.7 kernel, i only had the 4 HDMI lines (linked to a NVIDIA T600 card, with 4 HDMI outputs) and not the three first ones (attached to the motherboard). (of course i did several tests with 6.7, reboot, ... without any changes) Any idea ? Best regards -- Serge.

3 weeks, 4 days

4
7
0 0

FAILED: patch "[PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 79d10f4f21a92e459b2276a77be62c59c1502c9d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025100331-junior-federal-3e04@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 79d10f4f21a92e459b2276a77be62c59c1502c9d Mon Sep 17 00:00:00 2001 From: Duoming Zhou <duoming(a)zju.edu.cn> Date: Wed, 17 Sep 2025 17:57:42 +0800 Subject: [PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. Fixes: 869f38ae07f7 ("media: i2c: tc358743: Fix crash in the probe error path when using polling") Fixes: d32d98642de6 ("[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge") Cc: stable(a)vger.kernel.org Signed-off-by: Duoming Zhou <duoming(a)zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index aa02a5a6ae3e..a0ca19359c43 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -2326,10 +2326,10 @@ static int tc358743_probe(struct i2c_client *client) err_work_queues: cec_unregister_adapter(state->cec_adap); if (!state->i2c_client->irq) { - timer_delete(&state->timer); + timer_delete_sync(&state->timer); flush_work(&state->work_i2c_poll); } - cancel_delayed_work(&state->delayed_work_enable_hotplug); + cancel_delayed_work_sync(&state->delayed_work_enable_hotplug); mutex_destroy(&state->confctl_mutex); err_hdl: media_entity_cleanup(&sd->entity);

3 weeks, 4 days

2
1
0 0

FAILED: patch "[PATCH] wifi: rtw89: fix use-after-free in" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 3e31a6bc07312b448fad3b45de578471f86f0e77 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025100342-eternity-attractor-07ca@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3e31a6bc07312b448fad3b45de578471f86f0e77 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin <pchelkin(a)ispras.ru> Date: Sat, 20 Sep 2025 00:08:47 +0300 Subject: [PATCH] wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait() There is a bug observed when rtw89_core_tx_kick_off_and_wait() tries to access already freed skb_data: BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110 CPU: 6 UID: 0 PID: 41377 Comm: kworker/u64:24 Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025 Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] Use-after-free write at 0x0000000020309d9d (in kfence-#251): rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110 rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338 rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979 rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165 rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.h:141 rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012 rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059 rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758 process_one_work kernel/workqueue.c:3241 worker_thread kernel/workqueue.c:3400 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 kfence-#251: 0x0000000056e2393d-0x000000009943cb62, size=232, cache=skbuff_head_cache allocated by task 41377 on cpu 6 at 77869.159548s (0.009551s ago): __alloc_skb net/core/skbuff.c:659 __netdev_alloc_skb net/core/skbuff.c:734 ieee80211_nullfunc_get net/mac80211/tx.c:5844 rtw89_core_send_nullfunc drivers/net/wireless/realtek/rtw89/core.c:3431 rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338 rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979 rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165 rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.c:3194 rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012 rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059 rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758 process_one_work kernel/workqueue.c:3241 worker_thread kernel/workqueue.c:3400 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 freed by task 1045 on cpu 9 at 77869.168393s (0.001557s ago): ieee80211_tx_status_skb net/mac80211/status.c:1117 rtw89_pci_release_txwd_skb drivers/net/wireless/realtek/rtw89/pci.c:564 rtw89_pci_release_tx_skbs.isra.0 drivers/net/wireless/realtek/rtw89/pci.c:651 rtw89_pci_release_tx drivers/net/wireless/realtek/rtw89/pci.c:676 rtw89_pci_napi_poll drivers/net/wireless/realtek/rtw89/pci.c:4238 __napi_poll net/core/dev.c:7495 net_rx_action net/core/dev.c:7557 net/core/dev.c:7684 handle_softirqs kernel/softirq.c:580 do_softirq.part.0 kernel/softirq.c:480 __local_bh_enable_ip kernel/softirq.c:407 rtw89_pci_interrupt_threadfn drivers/net/wireless/realtek/rtw89/pci.c:927 irq_thread_fn kernel/irq/manage.c:1133 irq_thread kernel/irq/manage.c:1257 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 It is a consequence of a race between the waiting and the signaling side of the completion: Waiting thread Completing thread rtw89_core_tx_kick_off_and_wait() rcu_assign_pointer(skb_data->wait, wait) /* start waiting */ wait_for_completion_timeout() rtw89_pci_tx_status() rtw89_core_tx_wait_complete() rcu_read_lock() /* signals completion and * proceeds further */ complete(&wait->completion) rcu_read_unlock() ... /* frees skb_data */ ieee80211_tx_status_ni() /* returns (exit status doesn't matter) */ wait_for_completion_timeout() ... /* accesses the already freed skb_data */ rcu_assign_pointer(skb_data->wait, NULL) The completing side might proceed and free the underlying skb even before the waiting side is fully awoken and run to execution. Actually the race happens regardless of wait_for_completion_timeout() exit status, e.g. the waiting side may hit a timeout and the concurrent completing side is still able to free the skb. Skbs which are sent by rtw89_core_tx_kick_off_and_wait() are owned by the driver. They don't come from core ieee80211 stack so no need to pass them to ieee80211_tx_status_ni() on completing side. Introduce a work function which will act as a garbage collector for rtw89_tx_wait_info objects and the associated skbs. Thus no potentially heavy locks are required on the completing side. Found by Linux Verification Center (linuxtesting.org). Fixes: 1ae5ca615285 ("wifi: rtw89: add function to wait for completion of TX skbs") Cc: stable(a)vger.kernel.org Suggested-by: Zong-Zhe Yang <kevin_yang(a)realtek.com> Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> Acked-by: Ping-Ke Shih <pkshih(a)realtek.com> Signed-off-by: Ping-Ke Shih <pkshih(a)realtek.com> Link: https://patch.msgid.link/20250919210852.823912-2-pchelkin@ispras.ru diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c index fe059c4a6b55..ec467ae0e9e6 100644 --- a/drivers/net/wireless/realtek/rtw89/core.c +++ b/drivers/net/wireless/realtek/rtw89/core.c @@ -1135,6 +1135,14 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev, } } +static void rtw89_tx_wait_work(struct wiphy *wiphy, struct wiphy_work *work) +{ + struct rtw89_dev *rtwdev = container_of(work, struct rtw89_dev, + tx_wait_work.work); + + rtw89_tx_wait_list_clear(rtwdev); +} + void rtw89_core_tx_kick_off(struct rtw89_dev *rtwdev, u8 qsel) { u8 ch_dma; @@ -1152,6 +1160,8 @@ int rtw89_core_tx_kick_off_and_wait(struct rtw89_dev *rtwdev, struct sk_buff *sk unsigned long time_left; int ret = 0; + lockdep_assert_wiphy(rtwdev->hw->wiphy); + wait = kzalloc(sizeof(*wait), GFP_KERNEL); if (!wait) { rtw89_core_tx_kick_off(rtwdev, qsel); @@ -1159,18 +1169,23 @@ int rtw89_core_tx_kick_off_and_wait(struct rtw89_dev *rtwdev, struct sk_buff *sk } init_completion(&wait->completion); + wait->skb = skb; rcu_assign_pointer(skb_data->wait, wait); rtw89_core_tx_kick_off(rtwdev, qsel); time_left = wait_for_completion_timeout(&wait->completion, msecs_to_jiffies(timeout)); - if (time_left == 0) - ret = -ETIMEDOUT; - else if (!wait->tx_done) - ret = -EAGAIN; - rcu_assign_pointer(skb_data->wait, NULL); - kfree_rcu(wait, rcu_head); + if (time_left == 0) { + ret = -ETIMEDOUT; + list_add_tail(&wait->list, &rtwdev->tx_waits); + wiphy_delayed_work_queue(rtwdev->hw->wiphy, &rtwdev->tx_wait_work, + RTW89_TX_WAIT_WORK_TIMEOUT); + } else { + if (!wait->tx_done) + ret = -EAGAIN; + rtw89_tx_wait_release(wait); + } return ret; } @@ -5548,6 +5563,7 @@ void rtw89_core_stop(struct rtw89_dev *rtwdev) wiphy_work_cancel(wiphy, &btc->dhcp_notify_work); wiphy_work_cancel(wiphy, &btc->icmp_notify_work); cancel_delayed_work_sync(&rtwdev->txq_reinvoke_work); + wiphy_delayed_work_cancel(wiphy, &rtwdev->tx_wait_work); wiphy_delayed_work_cancel(wiphy, &rtwdev->track_work); wiphy_delayed_work_cancel(wiphy, &rtwdev->track_ps_work); wiphy_delayed_work_cancel(wiphy, &rtwdev->chanctx_work); @@ -5773,6 +5789,7 @@ int rtw89_core_init(struct rtw89_dev *rtwdev) INIT_LIST_HEAD(&rtwdev->scan_info.pkt_list[band]); } INIT_LIST_HEAD(&rtwdev->scan_info.chan_list); + INIT_LIST_HEAD(&rtwdev->tx_waits); INIT_WORK(&rtwdev->ba_work, rtw89_core_ba_work); INIT_WORK(&rtwdev->txq_work, rtw89_core_txq_work); INIT_DELAYED_WORK(&rtwdev->txq_reinvoke_work, rtw89_core_txq_reinvoke_work); @@ -5784,6 +5801,7 @@ int rtw89_core_init(struct rtw89_dev *rtwdev) wiphy_delayed_work_init(&rtwdev->coex_rfk_chk_work, rtw89_coex_rfk_chk_work); wiphy_delayed_work_init(&rtwdev->cfo_track_work, rtw89_phy_cfo_track_work); wiphy_delayed_work_init(&rtwdev->mcc_prepare_done_work, rtw89_mcc_prepare_done_work); + wiphy_delayed_work_init(&rtwdev->tx_wait_work, rtw89_tx_wait_work); INIT_DELAYED_WORK(&rtwdev->forbid_ba_work, rtw89_forbid_ba_work); wiphy_delayed_work_init(&rtwdev->antdiv_work, rtw89_phy_antdiv_work); rtwdev->txq_wq = alloc_workqueue("rtw89_tx_wq", WQ_UNBOUND | WQ_HIGHPRI, 0); diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h index 3d4ad2ffb75c..d15fa70eb4dc 100644 --- a/drivers/net/wireless/realtek/rtw89/core.h +++ b/drivers/net/wireless/realtek/rtw89/core.h @@ -3507,9 +3507,12 @@ struct rtw89_phy_rate_pattern { bool enable; }; +#define RTW89_TX_WAIT_WORK_TIMEOUT msecs_to_jiffies(500) struct rtw89_tx_wait_info { struct rcu_head rcu_head; + struct list_head list; struct completion completion; + struct sk_buff *skb; bool tx_done; }; @@ -6000,6 +6003,9 @@ struct rtw89_dev { /* used to protect rpwm */ spinlock_t rpwm_lock; + struct list_head tx_waits; + struct wiphy_delayed_work tx_wait_work; + struct rtw89_cam_info cam_info; struct sk_buff_head c2h_queue; @@ -6256,6 +6262,26 @@ rtw89_assoc_link_rcu_dereference(struct rtw89_dev *rtwdev, u8 macid) list_first_entry_or_null(&p->dlink_pool, typeof(*p->links_inst), dlink_schd); \ }) +static inline void rtw89_tx_wait_release(struct rtw89_tx_wait_info *wait) +{ + dev_kfree_skb_any(wait->skb); + kfree_rcu(wait, rcu_head); +} + +static inline void rtw89_tx_wait_list_clear(struct rtw89_dev *rtwdev) +{ + struct rtw89_tx_wait_info *wait, *tmp; + + lockdep_assert_wiphy(rtwdev->hw->wiphy); + + list_for_each_entry_safe(wait, tmp, &rtwdev->tx_waits, list) { + if (!completion_done(&wait->completion)) + continue; + list_del(&wait->list); + rtw89_tx_wait_release(wait); + } +} + static inline int rtw89_hci_tx_write(struct rtw89_dev *rtwdev, struct rtw89_core_tx_request *tx_req) { @@ -6265,6 +6291,7 @@ static inline int rtw89_hci_tx_write(struct rtw89_dev *rtwdev, static inline void rtw89_hci_reset(struct rtw89_dev *rtwdev) { rtwdev->hci.ops->reset(rtwdev); + rtw89_tx_wait_list_clear(rtwdev); } static inline int rtw89_hci_start(struct rtw89_dev *rtwdev) @@ -7345,11 +7372,12 @@ static inline struct sk_buff *rtw89_alloc_skb_for_rx(struct rtw89_dev *rtwdev, return dev_alloc_skb(length); } -static inline void rtw89_core_tx_wait_complete(struct rtw89_dev *rtwdev, +static inline bool rtw89_core_tx_wait_complete(struct rtw89_dev *rtwdev, struct rtw89_tx_skb_data *skb_data, bool tx_done) { struct rtw89_tx_wait_info *wait; + bool ret = false; rcu_read_lock(); @@ -7357,11 +7385,14 @@ static inline void rtw89_core_tx_wait_complete(struct rtw89_dev *rtwdev, if (!wait) goto out; + ret = true; wait->tx_done = tx_done; - complete(&wait->completion); + /* Don't access skb anymore after completion */ + complete_all(&wait->completion); out: rcu_read_unlock(); + return ret; } static inline bool rtw89_is_mlo_1_1(struct rtw89_dev *rtwdev) diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c index c8286eb84276..8dd91d867ea6 100644 --- a/drivers/net/wireless/realtek/rtw89/pci.c +++ b/drivers/net/wireless/realtek/rtw89/pci.c @@ -464,7 +464,8 @@ static void rtw89_pci_tx_status(struct rtw89_dev *rtwdev, struct rtw89_tx_skb_data *skb_data = RTW89_TX_SKB_CB(skb); struct ieee80211_tx_info *info; - rtw89_core_tx_wait_complete(rtwdev, skb_data, tx_status == RTW89_TX_DONE); + if (rtw89_core_tx_wait_complete(rtwdev, skb_data, tx_status == RTW89_TX_DONE)) + return; info = IEEE80211_SKB_CB(skb); ieee80211_tx_info_clear_status(info); diff --git a/drivers/net/wireless/realtek/rtw89/ser.c b/drivers/net/wireless/realtek/rtw89/ser.c index bb39fdbcba0d..fe7beff8c424 100644 --- a/drivers/net/wireless/realtek/rtw89/ser.c +++ b/drivers/net/wireless/realtek/rtw89/ser.c @@ -502,7 +502,9 @@ static void ser_reset_trx_st_hdl(struct rtw89_ser *ser, u8 evt) } drv_stop_rx(ser); + wiphy_lock(wiphy); drv_trx_reset(ser); + wiphy_unlock(wiphy); /* wait m3 */ hal_send_m2_event(ser);

3 weeks, 4 days

2
1
0 0

FAILED: patch "[PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 79d10f4f21a92e459b2276a77be62c59c1502c9d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025100330-bootie-slurp-7058@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 79d10f4f21a92e459b2276a77be62c59c1502c9d Mon Sep 17 00:00:00 2001 From: Duoming Zhou <duoming(a)zju.edu.cn> Date: Wed, 17 Sep 2025 17:57:42 +0800 Subject: [PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. Fixes: 869f38ae07f7 ("media: i2c: tc358743: Fix crash in the probe error path when using polling") Fixes: d32d98642de6 ("[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge") Cc: stable(a)vger.kernel.org Signed-off-by: Duoming Zhou <duoming(a)zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index aa02a5a6ae3e..a0ca19359c43 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -2326,10 +2326,10 @@ static int tc358743_probe(struct i2c_client *client) err_work_queues: cec_unregister_adapter(state->cec_adap); if (!state->i2c_client->irq) { - timer_delete(&state->timer); + timer_delete_sync(&state->timer); flush_work(&state->work_i2c_poll); } - cancel_delayed_work(&state->delayed_work_enable_hotplug); + cancel_delayed_work_sync(&state->delayed_work_enable_hotplug); mutex_destroy(&state->confctl_mutex); err_hdl: media_entity_cleanup(&sd->entity);

3 weeks, 4 days

2
1
0 0

FAILED: patch "[PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 79d10f4f21a92e459b2276a77be62c59c1502c9d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025100329-icy-unbroken-b3bb@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 79d10f4f21a92e459b2276a77be62c59c1502c9d Mon Sep 17 00:00:00 2001 From: Duoming Zhou <duoming(a)zju.edu.cn> Date: Wed, 17 Sep 2025 17:57:42 +0800 Subject: [PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. Fixes: 869f38ae07f7 ("media: i2c: tc358743: Fix crash in the probe error path when using polling") Fixes: d32d98642de6 ("[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge") Cc: stable(a)vger.kernel.org Signed-off-by: Duoming Zhou <duoming(a)zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index aa02a5a6ae3e..a0ca19359c43 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -2326,10 +2326,10 @@ static int tc358743_probe(struct i2c_client *client) err_work_queues: cec_unregister_adapter(state->cec_adap); if (!state->i2c_client->irq) { - timer_delete(&state->timer); + timer_delete_sync(&state->timer); flush_work(&state->work_i2c_poll); } - cancel_delayed_work(&state->delayed_work_enable_hotplug); + cancel_delayed_work_sync(&state->delayed_work_enable_hotplug); mutex_destroy(&state->confctl_mutex); err_hdl: media_entity_cleanup(&sd->entity);

3 weeks, 4 days

2
1
0 0

[PATCH] mm/mmap: Fix fsnotify_mmap_perm() call in vm_mmap_pgoff()

by Kiryl Shutsemau

From: Kiryl Shutsemau <kas(a)kernel.org> vm_mmap_pgoff() includes a fsnotify call that allows for pre-content hooks on mmap(). The fsnotify_mmap_perm() function takes, among other arguments, an offset in the file in the form of loff_t. However, vm_mmap_pgoff() has file offset in the form of pgoff. This offset needs to be converted before being passed to fsnotify_mmap_perm(). The conversion from pgoff to loff_t is incorrect. The pgoff value needs to be shifted left by PAGE_SHIFT to obtain loff_t, not right. This issue was identified through code inspection. Signed-off-by: Kiryl Shutsemau <kas(a)kernel.org> Fixes: 066e053fe208 ("fsnotify: add pre-content hooks on mmap()") Cc: stable(a)vger.kernel.org Cc: Josef Bacik <josef(a)toxicpanda.com> Cc: Amir Goldstein <amir73il(a)gmail.com> Cc: Jan Kara <jack(a)suse.cz> --- mm/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/util.c b/mm/util.c index f814e6a59ab1..52a667157264 100644 --- a/mm/util.c +++ b/mm/util.c @@ -573,7 +573,7 @@ unsigned long vm_mmap_pgoff(struct file *file, unsigned long addr, ret = security_mmap_file(file, prot, flag); if (!ret) - ret = fsnotify_mmap_perm(file, prot, pgoff >> PAGE_SHIFT, len); + ret = fsnotify_mmap_perm(file, prot, pgoff << PAGE_SHIFT, len); if (!ret) { if (mmap_write_lock_killable(mm)) return -EINTR; -- 2.50.1

3 weeks, 5 days

3
3
0 0

[REGRESSION] stable-rc/linux-5.4.y: (build) ./arch/arm64/include/asm/memory.h:85:50: error: ‘KASAN_SHADOW_SCAL...

by KernelCI bot

Hello, New build issue found on stable-rc/linux-5.4.y: --- ./arch/arm64/include/asm/memory.h:85:50: error: ‘KASAN_SHADOW_SCALE_SHIFT’ undeclared (first use in this function) in arch/arm64/kernel/vdso32/vgettimeofday.o (arch/arm64/kernel/vdso32/Makefile:166) [logspec:kbuild,kbuild.compiler.error] --- - dashboard: https://d.kernelci.org/i/maestro:35fc997ccf1864d670c66eb7815463e470fe1fa9 - giturl: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git - commit HEAD: 2c0548712531f8b879edccf67949a8e5abe4e5e4 Log excerpt: ===================================================== CC32 arch/arm64/kernel/vdso32/vgettimeofday.o AS32 arch/arm64/kernel/vdso32/sigreturn.o HOSTCC arch/arm64/kernel/vdso32/../../../arm/vdso/vdsomunge In file included from ./arch/arm64/include/asm/thread_info.h:17, from ./include/linux/thread_info.h:39, from ./arch/arm64/include/asm/preempt.h:5, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:51, from ./include/linux/seqlock.h:36, from ./include/linux/time.h:6, from /tmp/kci/linux/lib/vdso/gettimeofday.c:7, from <command-line>: ./arch/arm64/include/asm/memory.h: In function ‘kaslr_offset’: ./arch/arm64/include/asm/memory.h:85:50: error: ‘KASAN_SHADOW_SCALE_SHIFT’ undeclared (first use in this function) 85 | #define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ | ^~~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:50:34: note: in expansion of macro ‘KASAN_SHADOW_END’ 50 | #define BPF_JIT_REGION_START (KASAN_SHADOW_END) | ^~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:52:34: note: in expansion of macro ‘BPF_JIT_REGION_START’ 52 | #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) | ^~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:54:34: note: in expansion of macro ‘BPF_JIT_REGION_END’ 54 | #define MODULES_VADDR (BPF_JIT_REGION_END) | ^~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:53:34: note: in expansion of macro ‘MODULES_VADDR’ 53 | #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) | ^~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:49:34: note: in expansion of macro ‘MODULES_END’ 49 | #define KIMAGE_VADDR (MODULES_END) | ^~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:193:31: note: in expansion of macro ‘KIMAGE_VADDR’ 193 | return kimage_vaddr - KIMAGE_VADDR; | ^~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:85:50: note: each undeclared identifier is reported only once for each function it appears in 85 | #define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ | ^~~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:50:34: note: in expansion of macro ‘KASAN_SHADOW_END’ 50 | #define BPF_JIT_REGION_START (KASAN_SHADOW_END) | ^~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:52:34: note: in expansion of macro ‘BPF_JIT_REGION_START’ 52 | #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) | ^~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:54:34: note: in expansion of macro ‘BPF_JIT_REGION_END’ 54 | #define MODULES_VADDR (BPF_JIT_REGION_END) | ^~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:53:34: note: in expansion of macro ‘MODULES_VADDR’ 53 | #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) | ^~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:49:34: note: in expansion of macro ‘MODULES_END’ 49 | #define KIMAGE_VADDR (MODULES_END) | ^~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:193:31: note: in expansion of macro ‘KIMAGE_VADDR’ 193 | return kimage_vaddr - KIMAGE_VADDR; | ^~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h: In function ‘__tag_set’: ./arch/arm64/include/asm/memory.h:238:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 238 | u64 __addr = (u64)addr & ~__tag_shifted(0xff); | ^ In file included from ./arch/arm64/include/asm/pgtable-hwdef.h:8, from ./arch/arm64/include/asm/processor.h:34, from ./arch/arm64/include/asm/elf.h:118, from ./include/linux/elf.h:5, from ./include/linux/elfnote.h:62, from arch/arm64/kernel/vdso32/note.c:11: ./arch/arm64/include/asm/memory.h: In function ‘kaslr_offset’: ./arch/arm64/include/asm/memory.h:85:50: error: ‘KASAN_SHADOW_SCALE_SHIFT’ undeclared (first use in this function) 85 | #define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ | ^~~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:50:34: note: in expansion of macro ‘KASAN_SHADOW_END’ 50 | #define BPF_JIT_REGION_START (KASAN_SHADOW_END) | ^~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:52:34: note: in expansion of macro ‘BPF_JIT_REGION_START’ 52 | #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) | ^~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:54:34: note: in expansion of macro ‘BPF_JIT_REGION_END’ 54 | #define MODULES_VADDR (BPF_JIT_REGION_END) | ^~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:53:34: note: in expansion of macro ‘MODULES_VADDR’ 53 | #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) | ^~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:49:34: note: in expansion of macro ‘MODULES_END’ 49 | #define KIMAGE_VADDR (MODULES_END) | ^~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:193:31: note: in expansion of macro ‘KIMAGE_VADDR’ 193 | return kimage_vaddr - KIMAGE_VADDR; | ^~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:85:50: note: each undeclared identifier is reported only once for each function it appears in 85 | #define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ | ^~~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:50:34: note: in expansion of macro ‘KASAN_SHADOW_END’ 50 | #define BPF_JIT_REGION_START (KASAN_SHADOW_END) | ^~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:52:34: note: in expansion of macro ‘BPF_JIT_REGION_START’ 52 | #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) | ^~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:54:34: note: in expansion of macro ‘BPF_JIT_REGION_END’ 54 | #define MODULES_VADDR (BPF_JIT_REGION_END) | ^~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:53:34: note: in expansion of macro ‘MODULES_VADDR’ 53 | #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) | ^~~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:49:34: note: in expansion of macro ‘MODULES_END’ 49 | #define KIMAGE_VADDR (MODULES_END) | ^~~~~~~~~~~ ./arch/arm64/include/asm/memory.h:193:31: note: in expansion of macro ‘KIMAGE_VADDR’ 193 | return kimage_vaddr - KIMAGE_VADDR; | ^~~~~~~~~~~~ ./arch/arm64/include/asm/memory.h: In function ‘__tag_set’: ./arch/arm64/include/asm/memory.h:238:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 238 | u64 __addr = (u64)addr & ~__tag_shifted(0xff); | ^ ===================================================== # Builds where the incident occurred: ## defconfig+arm64-chromebook+kcidebug+lab-setup on (arm64): - compiler: gcc-12 - dashboard: https://d.kernelci.org/build/maestro:68dffa7e841b167e8d3e0d0c #kernelci issue maestro:35fc997ccf1864d670c66eb7815463e470fe1fa9 Reported-by: kernelci.org bot <bot(a)kernelci.org> -- This is an experimental report format. Please send feedback in! Talk to us at kernelci(a)lists.linux.dev Made with love by the KernelCI team - https://kernelci.org

3 weeks, 5 days

1
0
0 0

FAILED: patch "[PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 79d10f4f21a92e459b2276a77be62c59c1502c9d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025100327-municipal-zone-0d8a@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 79d10f4f21a92e459b2276a77be62c59c1502c9d Mon Sep 17 00:00:00 2001 From: Duoming Zhou <duoming(a)zju.edu.cn> Date: Wed, 17 Sep 2025 17:57:42 +0800 Subject: [PATCH] media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. Fixes: 869f38ae07f7 ("media: i2c: tc358743: Fix crash in the probe error path when using polling") Fixes: d32d98642de6 ("[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge") Cc: stable(a)vger.kernel.org Signed-off-by: Duoming Zhou <duoming(a)zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index aa02a5a6ae3e..a0ca19359c43 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -2326,10 +2326,10 @@ static int tc358743_probe(struct i2c_client *client) err_work_queues: cec_unregister_adapter(state->cec_adap); if (!state->i2c_client->irq) { - timer_delete(&state->timer); + timer_delete_sync(&state->timer); flush_work(&state->work_i2c_poll); } - cancel_delayed_work(&state->delayed_work_enable_hotplug); + cancel_delayed_work_sync(&state->delayed_work_enable_hotplug); mutex_destroy(&state->confctl_mutex); err_hdl: media_entity_cleanup(&sd->entity);

3 weeks, 5 days

2
1
0 0

[PATCH v2] media: mtk-mdp: Fix some issues in mtk_mdp_core.c

by Haoxiang Li

Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak. Also add platform_device_put() in mtk_mdp_remove(). Add mtk_mdp_unregister_m2m_device() on the error handling path. Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- Changes in v2: - Add check for vpu_get_plat_device() - Add platform_device_put() in mtk_mdp_remove() - Add mtk_mdp_unregister_m2m_device() on the error handling path. - Modify the patch title and description. I think you are right. Thanks, CJ! --- .../media/platform/mediatek/mdp/mtk_mdp_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c b/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c index 80fdc6ff57e0..8432833814f3 100644 --- a/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c +++ b/drivers/media/platform/mediatek/mdp/mtk_mdp_core.c @@ -194,11 +194,17 @@ static int mtk_mdp_probe(struct platform_device *pdev) } mdp->vpu_dev = vpu_get_plat_device(pdev); + if (!mdp->vpu_dev) { + dev_err(&pdev->dev, "Failed to get vpu device\n"); + ret = -ENODEV; + goto err_vpu_get_dev; + } + ret = vpu_wdt_reg_handler(mdp->vpu_dev, mtk_mdp_reset_handler, mdp, VPU_RST_MDP); if (ret) { dev_err(&pdev->dev, "Failed to register reset handler\n"); - goto err_m2m_register; + goto err_reg_handler; } platform_set_drvdata(pdev, mdp); @@ -206,7 +212,7 @@ static int mtk_mdp_probe(struct platform_device *pdev) ret = vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { dev_err(&pdev->dev, "Failed to set vb2 dma mag seg size\n"); - goto err_m2m_register; + goto err_reg_handler; } pm_runtime_enable(dev); @@ -214,6 +220,12 @@ static int mtk_mdp_probe(struct platform_device *pdev) return 0; +err_reg_handler: + platform_device_put(mdp->vpu_dev); + +err_vpu_get_dev: + mtk_mdp_unregister_m2m_device(mdp); + err_m2m_register: v4l2_device_unregister(&mdp->v4l2_dev); @@ -242,6 +254,7 @@ static void mtk_mdp_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); vb2_dma_contig_clear_max_seg_size(&pdev->dev); + platform_device_put(mdp->vpu_dev); mtk_mdp_unregister_m2m_device(mdp); v4l2_device_unregister(&mdp->v4l2_dev); -- 2.25.1

3 weeks, 5 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2025