October 2025 - Linux-stable-mirror

[PATCH] regmap: irq: Correct documentation of wake_invert flag

by Shawn Guo

From: Shawn Guo <shawnguo(a)kernel.org> Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion") the wake_invert flag is to support enable register, so cleared bits are wake disabled. Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags") Cc: stable(a)vger.kernel.org Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> --- include/linux/regmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 4e1ac1fbcec4..55343795644b 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1643,7 +1643,7 @@ struct regmap_irq_chip_data; * @status_invert: Inverted status register: cleared bits are active interrupts. * @status_is_level: Status register is actuall signal level: Xor status * register with previous value to get active interrupts. - * @wake_invert: Inverted wake register: cleared bits are wake enabled. + * @wake_invert: Inverted wake register: cleared bits are wake disabled. * @type_in_mask: Use the mask registers for controlling irq type. Use this if * the hardware provides separate bits for rising/falling edge * or low/high level interrupts and they should be combined into -- 2.43.0

3 weeks, 4 days

2
3
0 0

[PATCH] ALSA: wavefront: fix buffer overflow in longname construction

by moonafterrain＠outlook.com

From: Junrui Luo <moonafterrain(a)outlook.com> The snd_wavefront_probe() function constructs the card->longname string using unsafe sprintf() calls that can overflow the 80-byte buffer when module parameters contain large values. The vulnerability exists at wavefront.c where multiple sprintf() operations append to card->longname without length checking. Fix by replacing all sprintf() calls with scnprintf() and proper length tracking to ensure writes never exceed sizeof(card->longname). Reported-by: Yuhao Jiang <danisjiang(a)gmail.com> Reported-by: Junrui Luo <moonafterrain(a)outlook.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org Signed-off-by: Junrui Luo <moonafterrain(a)outlook.com> --- sound/isa/wavefront/wavefront.c | 40 ++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index 07c68568091d..74ea3a67620c 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -343,6 +343,7 @@ snd_wavefront_probe (struct snd_card *card, int dev) struct snd_rawmidi *ics2115_external_rmidi = NULL; struct snd_hwdep *fx_processor; int hw_dev = 0, midi_dev = 0, err; + size_t len, rem; /* --------- PCM --------------- */ @@ -492,26 +493,35 @@ snd_wavefront_probe (struct snd_card *card, int dev) length restrictions */ - sprintf(card->longname, "%s PCM 0x%lx irq %d dma %d", - card->driver, - chip->port, - cs4232_pcm_irq[dev], - dma1[dev]); + len = scnprintf(card->longname, sizeof(card->longname), + "%s PCM 0x%lx irq %d dma %d", + card->driver, + chip->port, + cs4232_pcm_irq[dev], + dma1[dev]); - if (dma2[dev] >= 0 && dma2[dev] < 8) - sprintf(card->longname + strlen(card->longname), "&%d", dma2[dev]); + if (dma2[dev] >= 0 && dma2[dev] < 8 && len < sizeof(card->longname)) { + rem = sizeof(card->longname) - len; + len += scnprintf(card->longname + len, rem, "&%d", dma2[dev]); + } if (cs4232_mpu_port[dev] > 0 && cs4232_mpu_port[dev] != SNDRV_AUTO_PORT) { - sprintf (card->longname + strlen (card->longname), - " MPU-401 0x%lx irq %d", - cs4232_mpu_port[dev], - cs4232_mpu_irq[dev]); + if (len < sizeof(card->longname)) { + rem = sizeof(card->longname) - len; + len += scnprintf(card->longname + len, rem, + " MPU-401 0x%lx irq %d", + cs4232_mpu_port[dev], + cs4232_mpu_irq[dev]); + } } - sprintf (card->longname + strlen (card->longname), - " SYNTH 0x%lx irq %d", - ics2115_port[dev], - ics2115_irq[dev]); + if (len < sizeof(card->longname)) { + rem = sizeof(card->longname) - len; + scnprintf(card->longname + len, rem, + " SYNTH 0x%lx irq %d", + ics2115_port[dev], + ics2115_irq[dev]); + } return snd_card_register(card); } -- 2.51.1.dirty

3 weeks, 4 days

2
1
0 0

[PATCH] mm/mremap: Honour writable bit in mremap pte batching

by Dev Jain

Currently mremap folio pte batch ignores the writable bit during figuring out a set of similar ptes mapping the same folio. Suppose that the first pte of the batch is writable while the others are not - set_ptes will end up setting the writable bit on the other ptes, which is a violation of mremap semantics. Therefore, use FPB_RESPECT_WRITE to check the writable bit while determining the pte batch. Cc: stable(a)vger.kernel.org #6.17 Fixes: f822a9a81a31 ("mm: optimize mremap() by PTE batching") Reported-by: David Hildenbrand <david(a)redhat.com> Debugged-by: David Hildenbrand <david(a)redhat.com> Signed-off-by: Dev Jain <dev.jain(a)arm.com> --- mm-selftests pass. Based on mm-new. Need David H. to confirm whether the repro passes. mm/mremap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mremap.c b/mm/mremap.c index a7f531c17b79..8ad06cf50783 100644 --- a/mm/mremap.c +++ b/mm/mremap.c @@ -187,7 +187,7 @@ static int mremap_folio_pte_batch(struct vm_area_struct *vma, unsigned long addr if (!folio || !folio_test_large(folio)) return 1; - return folio_pte_batch(folio, ptep, pte, max_nr); + return folio_pte_batch_flags(folio, NULL, ptep, &pte, max_nr, FPB_RESPECT_WRITE); } static int move_ptes(struct pagetable_move_control *pmc, -- 2.30.2

3 weeks, 4 days

4
3
0 0

, conoce mejor a tu candidato antes de contratar

by Valeria Pérez

Evaluaciones Psicométricas para RR.HH. body { margin: 0; padding: 0; font-family: Arial, Helvetica, sans-serif; font-size: 14px; color: #333; background-color: #ffffff; } table { border-spacing: 0; width: 100%; max-width: 600px; margin: auto; } td { padding: 12px 20px; } a { color: #1a73e8; text-decoration: none; } .footer { font-size: 12px; color: #888888; text-align: center; } Mejora tus procesos de selección con evaluaciones psicométricas fáciles y confiables. Hola, , Sabemos que encontrar al candidato ideal va más allá del currículum. Por eso quiero contarte brevemente sobre PsicoSmart, una plataforma que ayuda a equipos de RR.HH. a evaluar talento con pruebas psicométricas rápidas, confiables y fáciles de aplicar. Con PsicoSmart puedes: Aplicar evaluaciones psicométricas 100% en línea. Elegir entre más de 31 pruebas psicométricas Generar reportes automáticos, visuales y fáciles de interpretar. Comparar resultados entre candidatos en segundos. Ahorrar horas valiosas del proceso de selección. Si estás buscando mejorar tus contrataciones, te lo recomiendo muchísimo. Si quieres conocer más puedes responder este correo o simplemente contactarme, mis datos están abajo. Saludos, ----------------------------- Atte.: Valeria Pérez Ciudad de México: (55) 5018 0565 WhatsApp: +52 33 1607 2089 Si no deseas recibir más correos, haz clic aquí para darte de baja. Para remover su dirección de esta lista haga <a href="https://s1.arrobamail.com/unsuscribe.php?id=yiwtsrewisppiseup">click aquí</a>

3 weeks, 4 days

1
0
0 0

[PATCH] agp/uninorth: fix out-of-bounds access with negative pg_start

by moonafterrain＠outlook.com

From: Junrui Luo <moonafterrain(a)outlook.com> The uninorth_insert_memory and uninorth_remove_memory functions lack proper validation of the pg_start parameter before using it as an array index into the GATT (Graphics Address Translation Table). The current bounds check fails to reject negative pg_start values and potentially causes out-of-bounds writes. Fix by explicitly checking that pg_start is non-negative before performing bounds checking. This makes the security requirement clear and does not rely on implicit type conversion behavior. The uninorth_remove_memory function has no bounds checking at all, so add the same validation there. Reported-by: Yuhao Jiang <danisjiang(a)gmail.com> Reported-by: Junrui Luo <moonafterrain(a)outlook.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org Signed-off-by: Junrui Luo <moonafterrain(a)outlook.com> --- drivers/char/agp/uninorth-agp.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index b8d7115b8c9e..4e0b949016f7 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -169,7 +169,9 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int ty temp = agp_bridge->current_size; num_entries = A_SIZE_32(temp)->num_entries; - if ((pg_start + mem->page_count) > num_entries) + if (pg_start < 0 || + (pg_start + mem->page_count) > num_entries || + (pg_start + mem->page_count) < pg_start) return -EINVAL; gp = (u32 *) &agp_bridge->gatt_table[pg_start]; @@ -200,6 +202,9 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int ty static int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type) { size_t i; + int num_entries; + void *temp; + u32 *gp; int mask_type; @@ -215,6 +220,14 @@ static int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int ty if (mem->page_count == 0) return 0; + temp = agp_bridge->current_size; + num_entries = A_SIZE_32(temp)->num_entries; + + if (pg_start < 0 || + (pg_start + mem->page_count) > num_entries || + (pg_start + mem->page_count) < pg_start) + return -EINVAL; + gp = (u32 *) &agp_bridge->gatt_table[pg_start]; for (i = 0; i < mem->page_count; ++i) { gp[i] = scratch_value; -- 2.51.1.dirty

3 weeks, 4 days

1
0
0 0

FAILED: patch "[PATCH] x86/resctrl: Fix miscount of bandwidth event when" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 15292f1b4c55a3a7c940dbcb6cb8793871ed3d92 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102054-slacks-ambush-f774@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 15292f1b4c55a3a7c940dbcb6cb8793871ed3d92 Mon Sep 17 00:00:00 2001 From: Babu Moger <babu.moger(a)amd.com> Date: Fri, 10 Oct 2025 12:08:35 -0500 Subject: [PATCH] x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID Users can create as many monitoring groups as the number of RMIDs supported by the hardware. However, on AMD systems, only a limited number of RMIDs are guaranteed to be actively tracked by the hardware. RMIDs that exceed this limit are placed in an "Unavailable" state. When a bandwidth counter is read for such an RMID, the hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62). When such an RMID starts being tracked again the hardware counter is reset to zero. MSR_IA32_QM_CTR.Unavailable remains set on first read after tracking re-starts and is clear on all subsequent reads as long as the RMID is tracked. resctrl miscounts the bandwidth events after an RMID transitions from the "Unavailable" state back to being tracked. This happens because when the hardware starts counting again after resetting the counter to zero, resctrl in turn compares the new count against the counter value stored from the previous time the RMID was tracked. This results in resctrl computing an event value that is either undercounting (when new counter is more than stored counter) or a mistaken overflow (when new counter is less than stored counter). Reset the stored value (arch_mbm_state::prev_msr) of MSR_IA32_QM_CTR to zero whenever the RMID is in the "Unavailable" state to ensure accurate counting after the RMID resets to zero when it starts to be tracked again. Example scenario that results in mistaken overflow ================================================== 1. The resctrl filesystem is mounted, and a task is assigned to a monitoring group. $mount -t resctrl resctrl /sys/fs/resctrl $mkdir /sys/fs/resctrl/mon_groups/test1/ $echo 1234 > /sys/fs/resctrl/mon_groups/test1/tasks $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes 21323 <- Total bytes on domain 0 "Unavailable" <- Total bytes on domain 1 Task is running on domain 0. Counter on domain 1 is "Unavailable". 2. The task runs on domain 0 for a while and then moves to domain 1. The counter starts incrementing on domain 1. $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes 7345357 <- Total bytes on domain 0 4545 <- Total bytes on domain 1 3. At some point, the RMID in domain 0 transitions to the "Unavailable" state because the task is no longer executing in that domain. $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes "Unavailable" <- Total bytes on domain 0 434341 <- Total bytes on domain 1 4. Since the task continues to migrate between domains, it may eventually return to domain 0. $cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes 17592178699059 <- Overflow on domain 0 3232332 <- Total bytes on domain 1 In this case, the RMID on domain 0 transitions from "Unavailable" state to active state. The hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62) when the counter is read and begins tracking the RMID counting from 0. Subsequent reads succeed but return a value smaller than the previously saved MSR value (7345357). Consequently, the resctrl's overflow logic is triggered, it compares the previous value (7345357) with the new, smaller value and incorrectly interprets this as a counter overflow, adding a large delta. In reality, this is a false positive: the counter did not overflow but was simply reset when the RMID transitioned from "Unavailable" back to active state. Here is the text from APM [1] available from [2]. "In PQOS Version 2.0 or higher, the MBM hardware will set the U bit on the first QM_CTR read when it begins tracking an RMID that it was not previously tracking. The U bit will be zero for all subsequent reads from that RMID while it is still tracked by the hardware. Therefore, a QM_CTR read with the U bit set when that RMID is in use by a processor can be considered 0 when calculating the difference with a subsequent read." [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming Publication # 24593 Revision 3.41 section 19.3.3 Monitoring L3 Memory Bandwidth (MBM). [ bp: Split commit message into smaller paragraph chunks for better consumption. ] Fixes: 4d05bf71f157d ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger <babu.moger(a)amd.com> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre(a)intel.com> Tested-by: Reinette Chatre <reinette.chatre(a)intel.com> Cc: stable(a)vger.kernel.org # needs adjustments for <= v6.17 Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2] diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c index c8945610d455..2cd25a0d4637 100644 --- a/arch/x86/kernel/cpu/resctrl/monitor.c +++ b/arch/x86/kernel/cpu/resctrl/monitor.c @@ -242,7 +242,9 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mon_domain *d, u32 unused, u32 rmid, enum resctrl_event_id eventid, u64 *val, void *ignored) { + struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d); int cpu = cpumask_any(&d->hdr.cpu_mask); + struct arch_mbm_state *am; u64 msr_val; u32 prmid; int ret; @@ -251,12 +253,16 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mon_domain *d, prmid = logical_rmid_to_physical_rmid(cpu, rmid); ret = __rmid_read_phys(prmid, eventid, &msr_val); - if (ret) - return ret; - *val = get_corrected_val(r, d, rmid, eventid, msr_val); + if (!ret) { + *val = get_corrected_val(r, d, rmid, eventid, msr_val); + } else if (ret == -EINVAL) { + am = get_arch_mbm_state(hw_dom, rmid, eventid); + if (am) + am->prev_msr = 0; + } - return 0; + return ret; } static int __cntr_id_read(u32 cntr_id, u64 *val)

3 weeks, 4 days

2
1
0 0

[PATCH] iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source

by Miaoqian Lin

When simple_write_to_buffer() succeeds, it returns the number of bytes actually copied to the buffer, which may be less than the requested 'count' if the buffer size is insufficient. However, the current code incorrectly uses 'count' as the index for null termination instead of the actual bytes copied, leading to out-of-bound write. Add a check for the count and use the return value as the index. Found via static analysis. This is similar to the commit da9374819eb3 ("iio: backend: fix out-of-bound write") Fixes: b1c5d68ea66e ("iio: dac: ad3552r-hs: add support for internal ramp") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- drivers/iio/dac/ad3552r-hs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad3552r-hs.c b/drivers/iio/dac/ad3552r-hs.c index 41b96b48ba98..a9578afa7015 100644 --- a/drivers/iio/dac/ad3552r-hs.c +++ b/drivers/iio/dac/ad3552r-hs.c @@ -549,12 +549,15 @@ static ssize_t ad3552r_hs_write_data_source(struct file *f, guard(mutex)(&st->lock); + if (count >= sizeof(buf)) + return -ENOSPC; + ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, userbuf, count); if (ret < 0) return ret; - buf[count] = '\0'; + buf[ret] = '\0'; ret = match_string(dbgfs_attr_source, ARRAY_SIZE(dbgfs_attr_source), buf); -- 2.39.5 (Apple Git-154)

3 weeks, 4 days

5
12
0 0

[PATCH] drm/mediatek: fix device use-after-free on unbind

by Johan Hovold

A recent change fixed device reference leaks when looking up drm platform device driver data during bind() but failed to remove a partial fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix kobject put for component sub-drivers"). This results in a reference imbalance on component bind() failures and on unbind() which could lead to a user-after-free. Make sure to only drop the references after retrieving the driver data by effectively reverting the previous partial fix. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. Fixes: 1f403699c40f ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv") Reported-by: Sjoerd Simons <sjoerd(a)collabora.com> Link: https://lore.kernel.org/r/20251003-mtk-drm-refcount-v1-1-3b3f2813b0db@colla… Cc: stable(a)vger.kernel.org Cc: Ma Ke <make24(a)iscas.ac.cn> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 384b0510272c..a94c51a83261 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -686,10 +686,6 @@ static int mtk_drm_bind(struct device *dev) for (i = 0; i < private->data->mmsys_dev_num; i++) private->all_drm_private[i]->drm = NULL; err_put_dev: - for (i = 0; i < private->data->mmsys_dev_num; i++) { - /* For device_find_child in mtk_drm_get_all_priv() */ - put_device(private->all_drm_private[i]->dev); - } put_device(private->mutex_dev); return ret; } @@ -697,18 +693,12 @@ static int mtk_drm_bind(struct device *dev) static void mtk_drm_unbind(struct device *dev) { struct mtk_drm_private *private = dev_get_drvdata(dev); - int i; /* for multi mmsys dev, unregister drm dev in mmsys master */ if (private->drm_master) { drm_dev_unregister(private->drm); mtk_drm_kms_deinit(private->drm); drm_dev_put(private->drm); - - for (i = 0; i < private->data->mmsys_dev_num; i++) { - /* For device_find_child in mtk_drm_get_all_priv() */ - put_device(private->all_drm_private[i]->dev); - } put_device(private->mutex_dev); } private->mtk_drm_bound = false; -- 2.49.1

3 weeks, 4 days

6
6
0 0

[PATCH] drm/of: Fix device node reference leak in drm_of_panel_bridge_remove

by Miaoqian Lin

of_graph_get_remote_node() returns a device node with its reference count incremented. The caller is responsible for releasing this reference when the node is no longer needed. Add of_node_put(remote) to fix the reference leak. Found via static analysis. Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- include/drm/drm_of.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/drm/drm_of.h b/include/drm/drm_of.h index 7f0256dae3f1..5940b1cd542b 100644 --- a/include/drm/drm_of.h +++ b/include/drm/drm_of.h @@ -171,6 +171,7 @@ static inline int drm_of_panel_bridge_remove(const struct device_node *np, return -ENODEV; bridge = of_drm_find_bridge(remote); + of_node_put(remote); drm_panel_bridge_remove(bridge); return 0; -- 2.39.5 (Apple Git-154)

3 weeks, 4 days

2
3
0 0

[PATCH] iio: accel: bmc150: Fix irq assumption regression

by Linus Walleij

The code in bmc150-accel-core.c unconditionally calls bmc150_accel_set_interrupt() in the iio_buffer_setup_ops, such as on the runtime PM resume path giving a kernel splat like this if the device has no interrupts: Unable to handle kernel NULL pointer dereference at virtual address 00000001 when read CPU: 0 UID: 0 PID: 393 Comm: iio-sensor-prox Not tainted 6.18.0-rc1-postmarketos-stericsson-00001-g6b43386e3737 #73 PREEMPT Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) PC is at bmc150_accel_set_interrupt+0x98/0x194 LR is at __pm_runtime_resume+0x5c/0x64 (...) Call trace: bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108 bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc __iio_update_buffers from enable_store+0x84/0xc8 enable_store from kernfs_fop_write_iter+0x154/0x1b4 kernfs_fop_write_iter from do_iter_readv_writev+0x178/0x1e4 do_iter_readv_writev from vfs_writev+0x158/0x3f4 vfs_writev from do_writev+0x74/0xe4 do_writev from __sys_trace_return+0x0/0x10 This bug seems to have been in the driver since the beginning, but it only manifests recently, I do not know why. Cc: stable(a)vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> --- drivers/iio/accel/bmc150-accel-core.c | 5 +++++ drivers/iio/accel/bmc150-accel.h | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 3c5d1560b163..f4421a3b0ef2 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -523,6 +523,10 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, const struct bmc150_accel_interrupt_info *info = intr->info; int ret; + /* We do not always have an IRQ */ + if (!data->has_irq) + return 0; + if (state) { if (atomic_inc_return(&intr->users) > 1) return 0; @@ -1696,6 +1700,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, } if (irq > 0) { + data->has_irq = true; ret = devm_request_threaded_irq(dev, irq, bmc150_accel_irq_handler, bmc150_accel_irq_thread_handler, diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h index 7a7baf52e595..6e9bb69a1fd4 100644 --- a/drivers/iio/accel/bmc150-accel.h +++ b/drivers/iio/accel/bmc150-accel.h @@ -59,6 +59,7 @@ enum bmc150_accel_trigger_id { struct bmc150_accel_data { struct regmap *regmap; struct regulator_bulk_data regulators[2]; + bool has_irq; struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS]; struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS]; struct mutex mutex; --- base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787 change-id: 20251027-fix-bmc150-7e568122b265 Best regards, -- Linus Walleij <linus.walleij(a)linaro.org>

3 weeks, 4 days

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2025