November 2025 - Linux-stable-mirror

[PATCH net 2/8] can: sja1000: fix max irq loop handling

by Marc Kleine-Budde

From: Thomas Mühlbacher <tmuehlbacher(a)posteo.net> Reading the interrupt register `SJA1000_IR` causes all of its bits to be reset. If we ever reach the condition of handling more than `SJA1000_MAX_IRQ` IRQs, we will have read the register and reset all its bits but without actually handling the interrupt inside of the loop body. This may, among other issues, cause us to never `netif_wake_queue()` again after a transmission interrupt. Fixes: 429da1cc841b ("can: Driver for the SJA1000 CAN controller") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Mühlbacher <tmuehlbacher(a)posteo.net> Acked-by: Oliver Hartkopp <socketcan(a)hartkopp.net> Link: https://patch.msgid.link/20251115153437.11419-1-tmuehlbacher@posteo.net Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/sja1000/sja1000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 4d245857ef1c..83476af8adb5 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -548,8 +548,8 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) goto out; - while ((isrc = priv->read_reg(priv, SJA1000_IR)) && - (n < SJA1000_MAX_IRQ)) { + while ((n < SJA1000_MAX_IRQ) && + (isrc = priv->read_reg(priv, SJA1000_IR))) { status = priv->read_reg(priv, SJA1000_SR); /* check for absent controller due to hw unplug */ -- 2.51.0

2 weeks, 5 days

1
0
0 0

[PATCH] can: rcar_canfd: Fix CAN-FD mode as default

by Biju

From: Biju Das <biju.das.jz(a)bp.renesas.com> The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") has aligned with the flow mentioned in the hardware manual for all SoCs except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to the wrong logic in the commit[1] sets the default mode to FD-Only mode instead of CAN-FD mode. This patch sets the CAN-FD mode as the default for all SoCs by dropping the rcar_canfd_set_mode() as some SoC requires mode setting in global reset mode, and the rest of the SoCs in channel reset mode and update the rcar_canfd_reset_controller() to take care of these constraints. Moreover, the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to simplify the code later to support FD-only mode. [1] commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") Cc: stable(a)vger.kernel.org Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> --- drivers/net/can/rcar/rcar_canfd.c | 53 ++++++++++++++++++------------- 1 file changed, 31 insertions(+), 22 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 49ab65274b51..05dbdf46dd6f 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val) rcar_canfd_update(val, val, addr); } +static void rcar_canfd_clear_bit_reg(void __iomem *addr, u32 val) +{ + rcar_canfd_update(val, 0, addr); +} + static void rcar_canfd_update_bit_reg(void __iomem *addr, u32 mask, u32 val) { rcar_canfd_update(mask, val, addr); @@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch, rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLCFG(w), rnc); } -static void rcar_canfd_set_mode(struct rcar_canfd_global *gpriv) -{ - if (gpriv->info->ch_interface_mode) { - u32 ch, val = gpriv->fdmode ? RCANFD_GEN4_FDCFG_FDOE - : RCANFD_GEN4_FDCFG_CLOE; - - for_each_set_bit(ch, &gpriv->channels_mask, - gpriv->info->max_channels) - rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, val); - } else { - if (gpriv->fdmode) - rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG, - RCANFD_GRMCFG_RCMC); - else - rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG, - RCANFD_GRMCFG_RCMC); - } -} - static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) { struct device *dev = &gpriv->pdev->dev; @@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) /* Reset Global error flags */ rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0); + /* Set the controller into appropriate mode */ + if (!gpriv->info->ch_interface_mode) { + if (gpriv->fdmode) + rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG, + RCANFD_GRMCFG_RCMC); + else + rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG, + RCANFD_GRMCFG_RCMC); + } + /* Transition all Channels to reset mode */ for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) { rcar_canfd_clear_bit(gpriv->base, @@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) dev_dbg(dev, "channel %u reset failed\n", ch); return err; } - } - /* Set the controller into appropriate mode */ - rcar_canfd_set_mode(gpriv); + /* Set the controller into appropriate mode */ + if (gpriv->info->ch_interface_mode) { + /* Do not set CLOE and FDOE simultaneously */ + if (!gpriv->fdmode) { + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_FDOE); + rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_CLOE); + } else { + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_FDOE); + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_CLOE); + } + } + } return 0; } -- 2.43.0

2 weeks, 5 days

3
3
0 0

[PATCH 1/2] HID: logitech-dj: Remove duplicate error logging

by Hans de Goede

logi_dj_recv_query_paired_devices() and logi_dj_recv_switch_to_dj_mode() both have 2 callers which all log an error if the function fails. Move the error logging to inside these 2 functions to remove the duplicated error logging in the callers. While at it also move the logi_dj_recv_send_report() call error handling in logi_dj_recv_switch_to_dj_mode() to directly after the call. That call only fails if the report cannot be found and in that case it does nothing, so the msleep() is not necessary on failures. Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()") Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <johannes.goede(a)oss.qualcomm.com> --- drivers/hid/hid-logitech-dj.c | 56 ++++++++++++++--------------------- 1 file changed, 23 insertions(+), 33 deletions(-) diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index d66f4807311a..58a848ed248d 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -889,7 +889,6 @@ static void delayedwork_callback(struct work_struct *work) struct dj_workitem workitem; unsigned long flags; int count; - int retval; dbg_hid("%s\n", __func__); @@ -926,11 +925,7 @@ static void delayedwork_callback(struct work_struct *work) logi_dj_recv_destroy_djhid_device(djrcv_dev, &workitem); break; case WORKITEM_TYPE_UNKNOWN: - retval = logi_dj_recv_query_paired_devices(djrcv_dev); - if (retval) { - hid_err(djrcv_dev->hidpp, "%s: logi_dj_recv_query_paired_devices error: %d\n", - __func__, retval); - } + logi_dj_recv_query_paired_devices(djrcv_dev); break; case WORKITEM_TYPE_EMPTY: dbg_hid("%s: device list is empty\n", __func__); @@ -1323,8 +1318,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) djrcv_dev->last_query = jiffies; - if (djrcv_dev->type != recvr_type_dj) - return logi_dj_recv_query_hidpp_devices(djrcv_dev); + if (djrcv_dev->type != recvr_type_dj) { + retval = logi_dj_recv_query_hidpp_devices(djrcv_dev); + goto out; + } dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) @@ -1334,6 +1331,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); kfree(dj_report); +out: + if (retval < 0) + hid_err(djrcv_dev->hidpp, "%s error:%d\n", __func__, retval); + return retval; } @@ -1359,6 +1360,8 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, (u8)timeout; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); + if (retval) + goto out; /* * Ugly sleep to work around a USB 3.0 bug when the receiver is @@ -1367,11 +1370,6 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, * 50 msec should gives enough time to the receiver to be ready. */ msleep(50); - - if (retval) { - kfree(dj_report); - return retval; - } } /* @@ -1397,7 +1395,12 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, HIDPP_REPORT_SHORT_LENGTH, HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); +out: kfree(dj_report); + + if (retval < 0) + hid_err(hdev, "%s error:%d\n", __func__, retval); + return retval; } @@ -1935,11 +1938,8 @@ static int logi_dj_probe(struct hid_device *hdev, if (has_hidpp) { retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); - if (retval < 0) { - hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n", - __func__, retval); + if (retval < 0) goto switch_to_dj_mode_fail; - } } /* This is enabling the polling urb on the IN endpoint */ @@ -1957,15 +1957,11 @@ static int logi_dj_probe(struct hid_device *hdev, spin_lock_irqsave(&djrcv_dev->lock, flags); djrcv_dev->ready = true; spin_unlock_irqrestore(&djrcv_dev->lock, flags); - retval = logi_dj_recv_query_paired_devices(djrcv_dev); - if (retval < 0) { - hid_err(hdev, "%s: logi_dj_recv_query_paired_devices error:%d\n", - __func__, retval); - /* - * This can happen with a KVM, let the probe succeed, - * logi_dj_recv_queue_unknown_work will retry later. - */ - } + /* + * This can fail with a KVM. Ignore errors to let the probe + * succeed, logi_dj_recv_queue_unknown_work will retry later. + */ + logi_dj_recv_query_paired_devices(djrcv_dev); } return 0; @@ -1982,18 +1978,12 @@ static int logi_dj_probe(struct hid_device *hdev, #ifdef CONFIG_PM static int logi_dj_reset_resume(struct hid_device *hdev) { - int retval; struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); if (!djrcv_dev || djrcv_dev->hidpp != hdev) return 0; - retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); - if (retval < 0) { - hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n", - __func__, retval); - } - + logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); return 0; } #endif -- 2.51.1

2 weeks, 5 days

2
1
0 0

[PATCH 3/6] slimbus: core: fix device reference leak on report present

by Johan Hovold

Slimbus devices can be allocated dynamically upon reception of report-present messages. Make sure to drop the reference taken when looking up already registered devices. Note that this requires taking an extra reference in case the device has not yet been registered and has to be allocated. Fixes: 46a2bb5a7f7e ("slimbus: core: Add slim controllers support") Cc: stable(a)vger.kernel.org # 4.16 Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/slimbus/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index 9f85c4280171..b4ab9a5d44b3 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -379,6 +379,8 @@ struct slim_device *slim_get_device(struct slim_controller *ctrl, sbdev = slim_alloc_device(ctrl, e_addr, NULL); if (!sbdev) return ERR_PTR(-ENOMEM); + + get_device(&sbdev->dev); } return sbdev; @@ -505,6 +507,7 @@ int slim_device_report_present(struct slim_controller *ctrl, ret = slim_device_alloc_laddr(sbdev, true); } + put_device(&sbdev->dev); out_put_rpm: pm_runtime_mark_last_busy(ctrl->dev); pm_runtime_put_autosuspend(ctrl->dev); -- 2.51.2

2 weeks, 5 days

1
0
0 0

[PATCH 2/6] slimbus: core: fix runtime PM imbalance on report present

by Johan Hovold

Make sure to balance the runtime PM usage count in case slimbus device or address allocation fails on report present, which would otherwise prevent the controller from suspending. Fixes: 4b14e62ad3c9 ("slimbus: Add support for 'clock-pause' feature") Cc: stable(a)vger.kernel.org # 4.16 Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/slimbus/core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index c808233692ee..9f85c4280171 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -489,21 +489,23 @@ int slim_device_report_present(struct slim_controller *ctrl, if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { dev_err(ctrl->dev, "slim ctrl not active,state:%d, ret:%d\n", ctrl->sched.clk_state, ret); - goto slimbus_not_active; + goto out_put_rpm; } sbdev = slim_get_device(ctrl, e_addr); - if (IS_ERR(sbdev)) - return -ENODEV; + if (IS_ERR(sbdev)) { + ret = -ENODEV; + goto out_put_rpm; + } if (sbdev->is_laddr_valid) { *laddr = sbdev->laddr; - return 0; + ret = 0; + } else { + ret = slim_device_alloc_laddr(sbdev, true); } - ret = slim_device_alloc_laddr(sbdev, true); - -slimbus_not_active: +out_put_rpm: pm_runtime_mark_last_busy(ctrl->dev); pm_runtime_put_autosuspend(ctrl->dev); return ret; -- 2.51.2

2 weeks, 5 days

1
0
0 0

Account closing Notice: Retain same Password linux-stable-mirror@lists.linaro.org

by Lists Helpdesk__

2 weeks, 5 days

1
0
0 0

[PATCH] clocksource/drivers/stm: Fix section mismatches

by Johan Hovold

Platform drivers can be probed after their init sections have been discarded (e.g. on probe deferral or manual rebind through sysfs) so the probe function must not live in init. Device managed resource actions similarly cannot be discarded. The "_probe" suffix of the driver structure name prevents modpost from warning about this so replace it to catch any similar future issues. Fixes: cec32ac75827 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms") Cc: stable(a)vger.kernel.org # 6.16 Cc: Daniel Lezcano <daniel.lezcano(a)linaro.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/clocksource/timer-nxp-stm.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/clocksource/timer-nxp-stm.c b/drivers/clocksource/timer-nxp-stm.c index bbc40623728f..ce10bdcfc76b 100644 --- a/drivers/clocksource/timer-nxp-stm.c +++ b/drivers/clocksource/timer-nxp-stm.c @@ -177,15 +177,15 @@ static void nxp_stm_clocksource_resume(struct clocksource *cs) nxp_stm_clocksource_enable(cs); } -static void __init devm_clocksource_unregister(void *data) +static void devm_clocksource_unregister(void *data) { struct stm_timer *stm_timer = data; clocksource_unregister(&stm_timer->cs); } -static int __init nxp_stm_clocksource_init(struct device *dev, struct stm_timer *stm_timer, - const char *name, void __iomem *base, struct clk *clk) +static int nxp_stm_clocksource_init(struct device *dev, struct stm_timer *stm_timer, + const char *name, void __iomem *base, struct clk *clk) { int ret; @@ -298,9 +298,9 @@ static void nxp_stm_clockevent_resume(struct clock_event_device *ced) nxp_stm_module_get(stm_timer); } -static int __init nxp_stm_clockevent_per_cpu_init(struct device *dev, struct stm_timer *stm_timer, - const char *name, void __iomem *base, int irq, - struct clk *clk, int cpu) +static int nxp_stm_clockevent_per_cpu_init(struct device *dev, struct stm_timer *stm_timer, + const char *name, void __iomem *base, int irq, + struct clk *clk, int cpu) { stm_timer->base = base; stm_timer->rate = clk_get_rate(clk); @@ -388,7 +388,7 @@ static irqreturn_t nxp_stm_module_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init nxp_stm_timer_probe(struct platform_device *pdev) +static int nxp_stm_timer_probe(struct platform_device *pdev) { struct stm_timer *stm_timer; struct device *dev = &pdev->dev; @@ -484,14 +484,14 @@ static const struct of_device_id nxp_stm_of_match[] = { }; MODULE_DEVICE_TABLE(of, nxp_stm_of_match); -static struct platform_driver nxp_stm_probe = { +static struct platform_driver nxp_stm_driver = { .probe = nxp_stm_timer_probe, .driver = { .name = "nxp-stm", .of_match_table = nxp_stm_of_match, }, }; -module_platform_driver(nxp_stm_probe); +module_platform_driver(nxp_stm_driver); MODULE_DESCRIPTION("NXP System Timer Module driver"); MODULE_LICENSE("GPL"); -- 2.49.1

2 weeks, 5 days

4
9
0 0

[PATCH] pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG(): [ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker) [ 9.233669] preempt_count: 1, expected: 0 [ 9.233673] RCU nest depth: 0, expected: 0 [ 9.233688] Tainted: [W]=WARN [ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025 [ 9.233694] Call trace: [ 9.233696] show_stack+0x24/0x38 (C) [ 9.233709] dump_stack_lvl+0x40/0x88 [ 9.233716] dump_stack+0x18/0x24 [ 9.233722] __might_resched+0x148/0x160 [ 9.233731] __might_sleep+0x38/0x98 [ 9.233736] mutex_lock+0x30/0xd8 [ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi] [ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi] [ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233772] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233779] gpiod_direction_output+0x38/0xd0 [ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy] [ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233799] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233806] gpiod_configure_flags+0x2c0/0x580 [ 9.233812] gpiod_find_and_request+0x358/0x4f8 [ 9.233819] gpiod_get_index+0x7c/0x98 [ 9.233826] devm_gpiod_get+0x34/0xb0 [ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio] [ 9.233836] auxiliary_bus_probe+0xb0/0xf0 [ 9.233845] really_probe+0x14c/0x450 [ 9.233853] __driver_probe_device+0xb0/0x188 [ 9.233858] driver_probe_device+0x4c/0x250 [ 9.233863] __driver_attach+0xf8/0x2a0 [ 9.233868] bus_for_each_dev+0xf8/0x158 [ 9.233872] driver_attach+0x30/0x48 [ 9.233876] bus_add_driver+0x158/0x2b8 [ 9.233880] driver_register+0x74/0x118 [ 9.233886] __auxiliary_driver_register+0x94/0xe8 [ 9.233893] init_module+0x34/0xfd0 [reset_gpio] [ 9.233898] do_one_initcall+0xec/0x300 [ 9.233903] do_init_module+0x64/0x260 [ 9.233910] load_module+0x16c4/0x1900 [ 9.233915] __arm64_sys_finit_module+0x24c/0x378 [ 9.233919] invoke_syscall+0x4c/0xe8 [ 9.233925] el0_svc_common+0x8c/0xf0 [ 9.233929] do_el0_svc+0x28/0x40 [ 9.233934] el0_svc+0x38/0x100 [ 9.233938] el0t_64_sync_handler+0x84/0x130 [ 9.233943] el0t_64_sync+0x17c/0x180 Mark the controller as sleeping. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Cc: stable(a)vger.kernel.org Reported-by: Val Packett <val(a)packett.cool> Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.co… Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 1c97ec44aa5ff..78212f9928430 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -498,7 +498,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev) pctrl->chip.base = -1; pctrl->chip.ngpio = data->npins; pctrl->chip.label = dev_name(dev); - pctrl->chip.can_sleep = false; + pctrl->chip.can_sleep = true; mutex_init(&pctrl->lock); -- 2.51.0

2 weeks, 5 days

3
3
0 0

[PATCH V1] arm64: dts: qcom: talos: Correct UFS clocks ordering

by Pradeep P V K

The current UFS clocks does not align with their respective names, causing the ref_clk to be set to an incorrect frequency as below, which results in command timeouts. ufshcd-qcom 1d84000.ufshc: invalid ref_clk setting = 300000000 This commit fixes the issue by properly reordering the UFS clocks to match their names. Fixes: ea172f61f4fd ("arm64: dts: qcom: qcs615: Fix up UFS clocks") Cc: stable(a)vger.kernel.org Signed-off-by: Pradeep P V K <pradeep.pragallapati(a)oss.qualcomm.com> --- arch/arm64/boot/dts/qcom/talos.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi index d1dbfa3bd81c..95d26e313622 100644 --- a/arch/arm64/boot/dts/qcom/talos.dtsi +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -1399,10 +1399,10 @@ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; clock-names = "core_clk", "bus_aggr_clk", "iface_clk", -- 2.17.1

2 weeks, 5 days

2
1
0 0

[PATCH v2 1/2] USB: serial: option: add Telit Cinterion FE910C04 new compositions

by Fabio Porcedda

Add the following Telit Cinterion new compositions: 0x10c1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c3: ECM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c5: RNDIS + tty (AT) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c5 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c6: MBIM + tty (AT) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c6 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c9: MBIM + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10cb: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=16 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=06.18 S: Manufacturer=Linux 6.18.0-rc3-usb+ xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=11 Cnt=01 Dev#= 7 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=413c ProdID=2003 Rev=03.01 S: Manufacturer=Dell S: Product=Dell USB Keyboard C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=70mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=24ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=10000 MxCh=10 D: Ver= 3.10 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev=06.18 S: Manufacturer=Linux 6.18.0-rc3-usb+ xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms Cc: stable(a)vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda(a)gmail.com> --- drivers/usb/serial/option.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e9400727ad36..b9983e6f5eff 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1433,10 +1433,24 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c1, 0xff), /* Telit FE910C04 (RNDIS) */ + .driver_info = NCTRL(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c2, 0xff), /* Telit FE910C04 (MBIM) */ + .driver_info = NCTRL(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c3, 0xff), /* Telit FE910C04 (ECM) */ + .driver_info = NCTRL(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c5, 0xff), /* Telit FE910C04 (RNDIS) */ + .driver_info = NCTRL(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c6, 0xff), /* Telit FE910C04 (MBIM) */ + .driver_info = NCTRL(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c9, 0xff), /* Telit FE910C04 (MBIM) */ + .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10cb, 0xff), /* Telit FE910C04 (RNDIS) */ + .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30), /* Telit FN990B (rmnet) */ .driver_info = NCTRL(5) }, { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) }, -- 2.52.0

2 weeks, 5 days

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2025