December 2025 - Linux-stable-mirror

[PATCH v5] w1: therm: Fix off-by-one buffer overflow in alarms_store

by Thorsten Blum

The sysfs buffer passed to alarms_store() is allocated with 'size + 1' bytes and a NUL terminator is appended. However, the 'size' argument does not account for this extra byte. The original code then allocated 'size' bytes and used strcpy() to copy 'buf', which always writes one byte past the allocated buffer since strcpy() copies until the NUL terminator at index 'size'. Fix this by parsing the 'buf' parameter directly using simple_strtoll() without allocating any intermediate memory or string copying. This removes the overflow while simplifying the code. Cc: stable(a)vger.kernel.org Fixes: e2c94d6f5720 ("w1_therm: adding alarm sysfs entry") Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- Compile-tested only. Changes in v5: - Replace gotos with return size (Krzysztof) - Link to v4: https://lore.kernel.org/lkml/20251111204422.41993-2-thorsten.blum@linux.dev/ Changes in v4: - Use simple_strtoll because kstrtoint also parses long long internally - Return -ERANGE in addition to -EINVAL to match kstrtoint's behavior - Remove any changes unrelated to fixing the buffer overflow (Krzysztof) while maintaining the same behavior and return values as before - Link to v3: https://lore.kernel.org/lkml/20251030155614.447905-1-thorsten.blum@linux.de… Changes in v3: - Add integer range check for 'temp' to match kstrtoint() behavior - Explicitly cast 'temp' to int when calling int_to_short() - Link to v2: https://lore.kernel.org/lkml/20251029130045.70127-2-thorsten.blum@linux.dev/ Changes in v2: - Fix buffer overflow instead of truncating the copy using strscpy() - Parse buffer directly using simple_strtol() as suggested by David - Update patch subject and description - Link to v1: https://lore.kernel.org/lkml/20251017170047.114224-2-thorsten.blum@linux.de… --- drivers/w1/slaves/w1_therm.c | 63 ++++++++++++------------------------ 1 file changed, 20 insertions(+), 43 deletions(-) diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 9ccedb3264fb..5c4e40883400 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -1836,55 +1836,36 @@ static ssize_t alarms_store(struct device *device, struct w1_slave *sl = dev_to_w1_slave(device); struct therm_info info; u8 new_config_register[3]; /* array of data to be written */ - int temp, ret; - char *token = NULL; + long long temp; + int ret = 0; s8 tl, th; /* 1 byte per value + temp ring order */ - char *p_args, *orig; - - p_args = orig = kmalloc(size, GFP_KERNEL); - /* Safe string copys as buf is const */ - if (!p_args) { - dev_warn(device, - "%s: error unable to allocate memory %d\n", - __func__, -ENOMEM); - return size; - } - strcpy(p_args, buf); - - /* Split string using space char */ - token = strsep(&p_args, " "); - - if (!token) { - dev_info(device, - "%s: error parsing args %d\n", __func__, -EINVAL); - goto free_m; - } - - /* Convert 1st entry to int */ - ret = kstrtoint (token, 10, &temp); + const char *p = buf; + char *endp; + + temp = simple_strtoll(p, &endp, 10); + if (p == endp || *endp != ' ') + ret = -EINVAL; + else if (temp < INT_MIN || temp > INT_MAX) + ret = -ERANGE; if (ret) { dev_info(device, "%s: error parsing args %d\n", __func__, ret); - goto free_m; + return size; } tl = int_to_short(temp); - /* Split string using space char */ - token = strsep(&p_args, " "); - if (!token) { - dev_info(device, - "%s: error parsing args %d\n", __func__, -EINVAL); - goto free_m; - } - /* Convert 2nd entry to int */ - ret = kstrtoint (token, 10, &temp); + p = endp + 1; + temp = simple_strtoll(p, &endp, 10); + if (p == endp) + ret = -EINVAL; + else if (temp < INT_MIN || temp > INT_MAX) + ret = -ERANGE; if (ret) { dev_info(device, "%s: error parsing args %d\n", __func__, ret); - goto free_m; + return size; } - /* Prepare to cast to short by eliminating out of range values */ th = int_to_short(temp); @@ -1905,7 +1886,7 @@ static ssize_t alarms_store(struct device *device, dev_info(device, "%s: error reading from the slave device %d\n", __func__, ret); - goto free_m; + return size; } /* Write data in the device RAM */ @@ -1913,7 +1894,7 @@ static ssize_t alarms_store(struct device *device, dev_info(device, "%s: Device not supported by the driver %d\n", __func__, -ENODEV); - goto free_m; + return size; } ret = SLAVE_SPECIFIC_FUNC(sl)->write_data(sl, new_config_register); @@ -1922,10 +1903,6 @@ static ssize_t alarms_store(struct device *device, "%s: error writing to the slave device %d\n", __func__, ret); -free_m: - /* free allocated memory */ - kfree(orig); - return size; } -- Thorsten Blum <thorsten.blum(a)linux.dev> GPG: 1D60 735E 8AEF 3BE4 73B6 9D84 7336 78FD 8DFE EAD4

6 days, 22 hours

2
2
0 0

[PATCH v2] net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write

by Deepanshu Kartikey

A deadlock can occur between nfc_unregister_device() and rfkill_fop_write() due to lock ordering inversion between device_lock and rfkill_global_mutex. The problematic lock order is: Thread A (rfkill_fop_write): rfkill_fop_write() mutex_lock(&rfkill_global_mutex) rfkill_set_block() nfc_rfkill_set_block() nfc_dev_down() device_lock(&dev->dev) <- waits for device_lock Thread B (nfc_unregister_device): nfc_unregister_device() device_lock(&dev->dev) rfkill_unregister() mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutex This creates a classic ABBA deadlock scenario. Fix this by moving rfkill_unregister() and rfkill_destroy() outside the device_lock critical section. Store the rfkill pointer in a local variable before releasing the lock, then call rfkill_unregister() after releasing device_lock. This change is safe because rfkill_fop_write() holds rfkill_global_mutex while calling the rfkill callbacks, and rfkill_unregister() also acquires rfkill_global_mutex before cleanup. Therefore, rfkill_unregister() will wait for any ongoing callback to complete before proceeding, and device_del() is only called after rfkill_unregister() returns, preventing any use-after-free. The similar lock ordering in nfc_register_device() (device_lock -> rfkill_global_mutex via rfkill_register) is safe because during registration the device is not yet in rfkill_list, so no concurrent rfkill operations can occur on this device. Fixes: 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") Cc: stable(a)vger.kernel.org Reported-by: syzbot+4ef89409a235d804c6c2(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4ef89409a235d804c6c2 Link: https://lore.kernel.org/all/20251217054908.178907-1-kartikey406@gmail.com/T/ [v1] Signed-off-by: Deepanshu Kartikey <kartikey406(a)gmail.com> --- v2: - Added explanation of why UAF is not possible - Added explanation of why nfc_register_device() is safe - Added Fixes and Cc: stable tags - Fixed blank line after variable declaration (kept it) --- net/nfc/core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/nfc/core.c b/net/nfc/core.c index ae1c842f9c64..82f023f37754 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -1154,6 +1154,7 @@ EXPORT_SYMBOL(nfc_register_device); void nfc_unregister_device(struct nfc_dev *dev) { int rc; + struct rfkill *rfk = NULL; pr_debug("dev_name=%s\n", dev_name(&dev->dev)); @@ -1164,13 +1165,17 @@ void nfc_unregister_device(struct nfc_dev *dev) device_lock(&dev->dev); if (dev->rfkill) { - rfkill_unregister(dev->rfkill); - rfkill_destroy(dev->rfkill); + rfk = dev->rfkill; dev->rfkill = NULL; } dev->shutting_down = true; device_unlock(&dev->dev); + if (rfk) { + rfkill_unregister(rfk); + rfkill_destroy(rfk); + } + if (dev->ops->check_presence) { timer_delete_sync(&dev->check_pres_timer); cancel_work_sync(&dev->check_pres_work); -- 2.43.0

6 days, 22 hours

2
1
0 0

[PATCH] ext4: xattr: fix wrong search.here in clone_block

by Jinchao Wang

syzbot reported a KASAN out-of-bounds Read in ext4_xattr_set_entry()[1]. When xattr_find_entry() returns -ENODATA, search.here still points to the position after the last valid entry. ext4_xattr_block_set() clones the xattr block because the original block maybe shared and must not be modified in place. In the clone_block, search.here is recomputed unconditionally from the old offset, which may place it past search.first. This results in a negative reset size and an out-of-bounds memmove() in ext4_xattr_set_entry(). Fix this by initializing search.here correctly when search.not_found is set. [1] https://syzkaller.appspot.com/bug?extid=f792df426ff0f5ceb8d1 Fixes: fd48e9acdf2 (ext4: Unindent codeblock in ext4_xattr_block_set) Cc: stable(a)vger.kernel.org Reported-by: syzbot+f792df426ff0f5ceb8d1(a)syzkaller.appspotmail.com Signed-off-by: Jinchao Wang <wangjinchao600(a)gmail.com> --- fs/ext4/xattr.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 2e02efbddaac..cc30abeb7f30 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1980,7 +1980,10 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode, goto cleanup; s->first = ENTRY(header(s->base)+1); header(s->base)->h_refcount = cpu_to_le32(1); - s->here = ENTRY(s->base + offset); + if (s->not_found) + s->here = s->first; + else + s->here = ENTRY(s->base + offset); s->end = s->base + bs->bh->b_size; /* -- 2.43.0

6 days, 23 hours

3
5
0 0

[PATCH v2] net: nfc: nci: Fix parameter validation for packet data

by Michael Thalmeier

Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct). For these cases it is only possible to check for minimum packet length. Fixes: 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") Cc: stable(a)vger.kernel.org Signed-off-by: Michael Thalmeier <michael.thalmeier(a)hale.at> --- Changes in v2: - Reference correct commit hash --- net/nfc/nci/ntf.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/nfc/nci/ntf.c b/net/nfc/nci/ntf.c index 418b84e2b260..5161e94f067f 100644 --- a/net/nfc/nci/ntf.c +++ b/net/nfc/nci/ntf.c @@ -58,7 +58,8 @@ static int nci_core_conn_credits_ntf_packet(struct nci_dev *ndev, struct nci_conn_info *conn_info; int i; - if (skb->len < sizeof(struct nci_core_conn_credit_ntf)) + /* Minimal packet size for num_entries=1 is 1 x __u8 + 1 x conn_credit_entry */ + if (skb->len < (sizeof(__u8) + sizeof(struct conn_credit_entry))) return -EINVAL; ntf = (struct nci_core_conn_credit_ntf *)skb->data; @@ -364,7 +365,8 @@ static int nci_rf_discover_ntf_packet(struct nci_dev *ndev, const __u8 *data; bool add_target = true; - if (skb->len < sizeof(struct nci_rf_discover_ntf)) + /* Minimal packet size is 5 if rf_tech_specific_params_len=0 */ + if (skb->len < (5 * sizeof(__u8))) return -EINVAL; data = skb->data; @@ -596,7 +598,10 @@ static int nci_rf_intf_activated_ntf_packet(struct nci_dev *ndev, const __u8 *data; int err = NCI_STATUS_OK; - if (skb->len < sizeof(struct nci_rf_intf_activated_ntf)) + /* Minimal packet size is 11 if + * f_tech_specific_params_len=0 and activation_params_len=0 + */ + if (skb->len < (11 * sizeof(__u8))) return -EINVAL; data = skb->data; -- 2.52.0

6 days, 23 hours

2
1
0 0

[PATCH v2] i2c: riic: Move suspend handling to NOIRQ phase

by Tommaso Merciai

Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added suspend support for the Renesas I2C driver and following this change on RZ/G3E the following WARNING is seen on entering suspend ... [ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 134.285536] ------------[ cut here ]------------ [ 134.290298] i2c i2c-2: Transfer while suspended [ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388 [ 134.365507] Tainted: [W]=WARN [ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT) [ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214 [ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214 [ 134.391717] sp : ffff800083f23860 [ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60 [ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001 [ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936 [ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006 [ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280 [ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09 [ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8 [ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000 [ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000 [ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80 [ 134.466851] Call trace: [ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P) [ 134.473715] i2c_smbus_xfer+0xbc/0x120 [ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84 [ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208] [ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208] [ 134.493226] __rtc_read_time+0x44/0x88 [ 134.497012] rtc_read_time+0x3c/0x68 [ 134.500622] rtc_suspend+0x9c/0x170 The warning is triggered because I2C transfers can still be attempted while the controller is already suspended, due to inappropriate ordering of the system sleep callbacks. If the controller is autosuspended, there is no way to wake it up once runtime PM disabled (in suspend_late()). During system resume, the I2C controller will be available only after runtime PM is re-enabled (in resume_early()). However, this may be too late for some devices. Wake up the controller in the suspend() callback while runtime PM is still enabled. The I2C controller will remain available until the suspend_noirq() callback (pm_runtime_force_suspend()) is called. During resume, the I2C controller can be restored by the resume_noirq() callback (pm_runtime_force_resume()). Finally, the resume() callback re-enables autosuspend. As a result, the I2C controller can remain available until the system enters suspend_noirq() and from resume_noirq(). Cc: stable(a)vger.kernel.org Fixes: 53326135d0e0 ("i2c: riic: Add suspend/resume support") Signed-off-by: Tommaso Merciai <tommaso.merciai.xr(a)bp.renesas.com> --- v1->v2: - Taking as reference commit: 4262df2a69c3 ("i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().") reworked the patch with a similar approach. Updated commit body accordingly. drivers/i2c/busses/i2c-riic.c | 46 +++++++++++++++++++++++++++++------ 1 file changed, 39 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 3e8f126cb7f7..9e3595b3623e 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -670,12 +670,39 @@ static const struct riic_of_data riic_rz_t2h_info = { static int riic_i2c_suspend(struct device *dev) { - struct riic_dev *riic = dev_get_drvdata(dev); - int ret; + /* + * Some I2C devices may need the I2C controller to remain active + * during resume_noirq() or suspend_noirq(). If the controller is + * autosuspended, there is no way to wake it up once runtime PM is + * disabled (in suspend_late()). + * + * During system resume, the I2C controller will be available only + * after runtime PM is re-enabled (in resume_early()). However, this + * may be too late for some devices. + * + * Wake up the controller in the suspend() callback while runtime PM + * is still enabled. The I2C controller will remain available until + * the suspend_noirq() callback (pm_runtime_force_suspend()) is + * called. During resume, the I2C controller can be restored by the + * resume_noirq() callback (pm_runtime_force_resume()). + * + * Finally, the resume() callback re-enables autosuspend, ensuring + * the I2C controller remains available until the system enters + * suspend_noirq() and from resume_noirq(). + */ + return pm_runtime_resume_and_get(dev); +} - ret = pm_runtime_resume_and_get(dev); - if (ret) - return ret; +static int riic_i2c_resume(struct device *dev) +{ + pm_runtime_put_autosuspend(dev); + + return 0; +} + +static int riic_i2c_suspend_noirq(struct device *dev) +{ + struct riic_dev *riic = dev_get_drvdata(dev); i2c_mark_adapter_suspended(&riic->adapter); @@ -683,12 +710,12 @@ static int riic_i2c_suspend(struct device *dev) riic_clear_set_bit(riic, ICCR1_ICE, 0, RIIC_ICCR1); pm_runtime_mark_last_busy(dev); - pm_runtime_put_sync(dev); + pm_runtime_force_suspend(dev); return reset_control_assert(riic->rstc); } -static int riic_i2c_resume(struct device *dev) +static int riic_i2c_resume_noirq(struct device *dev) { struct riic_dev *riic = dev_get_drvdata(dev); int ret; @@ -697,6 +724,10 @@ static int riic_i2c_resume(struct device *dev) if (ret) return ret; + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + ret = riic_init_hw(riic); if (ret) { /* @@ -714,6 +745,7 @@ static int riic_i2c_resume(struct device *dev) } static const struct dev_pm_ops riic_i2c_pm_ops = { + NOIRQ_SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend_noirq, riic_i2c_resume_noirq) SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend, riic_i2c_resume) }; -- 2.43.0

6 days, 23 hours

1
0
0 0

[PATCH v5 0/2] Enable 1GHz OPP am335x-bonegreen-eco

by Kory Maincent (TI.com)

The vdd_mpu regulator maximum voltage was previously limited to 1.2985V, which prevented the CPU from reaching the 1GHz operating point. This limitation was put in place because voltage changes were not working correctly, causing the board to stall when attempting higher frequencies. Increase the maximum voltage to 1.3515V to allow the full 1GHz OPP to be used. Add a TPS65219 PMIC driver fixes that properly implement the LOCK register handling, to make voltage transitions work reliably. Changes in v5: - Add a error message. - Link to v4: https://lore.kernel.org/r/20251112-fix_tps65219-v4-0-696a0f55d5d8@bootlin.c… Changes in v4: - Move the registers unlock in the probe instead of a custom regmap write operation. - Link to v3: https://lore.kernel.org/r/20251112-fix_tps65219-v3-0-e49bab4c01ce@bootlin.c… Changes in v3: - Remove an unused variable - Link to v2: https://lore.kernel.org/r/20251106-fix_tps65219-v2-0-a7d608c4272f@bootlin.c… Changes in v2: - Setup a custom regmap_bus only for the TPS65214 instead of checking the chip_id every time reg_write is called. - Add the am335x-bonegreen-eco devicetree change in the same patch series. Signed-off-by: Kory Maincent (TI.com) <kory.maincent(a)bootlin.com> --- Kory Maincent (TI.com) (2): mfd: tps65219: Implement LOCK register handling for TPS65214 ARM: dts: am335x-bonegreen-eco: Enable 1GHz OPP by increasing vdd_mpu voltage arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts | 2 +- drivers/mfd/tps65219.c | 9 +++++++++ include/linux/mfd/tps65219.h | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-) --- base-commit: 2bb202416d33347102b12bbd1db4837fb6685617 change-id: 20251106-fix_tps65219-dd62141d22cf Best regards, -- Köry Maincent, Bootlin Embedded Linux and kernel engineering https://bootlin.com

6 days, 23 hours

1
1
0 0

[PATCH 2/2] af_unix: only post SO_INQ cmsg for non-error case

by Jens Axboe

As is done for TCP sockets, don't post an SCM_INQ cmsg for an error case. Only post them for the non-error case, which is when unix_stream_read_generic will return >= 0. Cc: stable(a)vger.kernel.org Fixes: df30285b3670 ("af_unix: Introduce SO_INQ.") Reported-by: Julian Orth <ju.orth(a)gmail.com> Link: https://github.com/axboe/liburing/issues/1509 Signed-off-by: Jens Axboe <axboe(a)kernel.dk> --- net/unix/af_unix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 110d716087b5..72dc5d5bcac8 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -3091,7 +3091,7 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state, scm_recv_unix(sock, msg, &scm, flags); do_cmsg = READ_ONCE(u->recvmsg_inq); - if (do_cmsg || msg->msg_get_inq) { + if ((do_cmsg || msg->msg_get_inq) && (copied ?: err) >= 0) { msg->msg_inq = READ_ONCE(u->inq_len); if (do_cmsg) put_cmsg(msg, SOL_SOCKET, SCM_INQ, -- 2.51.0

6 days, 23 hours

1
0
0 0

[PATCH REGRESSION v3] drm/panel: simple: restore connector_type fallback

by Ludovic Desroches

The switch from devm_kzalloc() + drm_panel_init() to devm_drm_panel_alloc() introduced a regression. Several panel descriptors do not set connector_type. For those panels, panel_simple_probe() used to compute a connector type (currently DPI as a fallback) and pass that value to drm_panel_init(). After the conversion to devm_drm_panel_alloc(), the call unconditionally used desc->connector_type instead, ignoring the computed fallback and potentially passing DRM_MODE_CONNECTOR_Unknown, which drm_panel_bridge_add() does not allow. Move the connector_type validation / fallback logic before the devm_drm_panel_alloc() call and pass the computed connector_type to devm_drm_panel_alloc(), so panels without an explicit connector_type once again get the DPI default. Signed-off-by: Ludovic Desroches <ludovic.desroches(a)microchip.com> Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") Cc: stable(a)vger.kernel.org --- Changes in v3: - Add the tag "Cc: stable(a)vger.kernel.org" in the sign-off area. - Link to v2: https://lore.kernel.org/r/20251126-lcd_panel_connector_type_fix-v2-1-c15835… Changes in v2: - Fix a warning introduced by the code move. There is no need to jump to free_ddc, we can directly return from the function. - Link to v1: https://lore.kernel.org/r/20251121-lcd_panel_connector_type_fix-v1-1-fdbbef… --- drivers/gpu/drm/panel/panel-simple.c | 89 ++++++++++++++++++------------------ 1 file changed, 44 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 0019de93be1b663f55b04160606363cd043ab38b..5fd75b3939c635ca3e5b293ea37a759f479fa3f8 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -623,49 +623,6 @@ static struct panel_simple *panel_simple_probe(struct device *dev) if (IS_ERR(desc)) return ERR_CAST(desc); - panel = devm_drm_panel_alloc(dev, struct panel_simple, base, - &panel_simple_funcs, desc->connector_type); - if (IS_ERR(panel)) - return ERR_CAST(panel); - - panel->desc = desc; - - panel->supply = devm_regulator_get(dev, "power"); - if (IS_ERR(panel->supply)) - return ERR_CAST(panel->supply); - - panel->enable_gpio = devm_gpiod_get_optional(dev, "enable", - GPIOD_OUT_LOW); - if (IS_ERR(panel->enable_gpio)) - return dev_err_cast_probe(dev, panel->enable_gpio, - "failed to request GPIO\n"); - - err = of_drm_get_panel_orientation(dev->of_node, &panel->orientation); - if (err) { - dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err); - return ERR_PTR(err); - } - - ddc = of_parse_phandle(dev->of_node, "ddc-i2c-bus", 0); - if (ddc) { - panel->ddc = of_find_i2c_adapter_by_node(ddc); - of_node_put(ddc); - - if (!panel->ddc) - return ERR_PTR(-EPROBE_DEFER); - } - - if (!of_device_is_compatible(dev->of_node, "panel-dpi") && - !of_get_display_timing(dev->of_node, "panel-timing", &dt)) - panel_simple_parse_panel_timing_node(dev, panel, &dt); - - if (desc->connector_type == DRM_MODE_CONNECTOR_LVDS) { - /* Optional data-mapping property for overriding bus format */ - err = panel_simple_override_nondefault_lvds_datamapping(dev, panel); - if (err) - goto free_ddc; - } - connector_type = desc->connector_type; /* Catch common mistakes for panels. */ switch (connector_type) { @@ -690,8 +647,7 @@ static struct panel_simple *panel_simple_probe(struct device *dev) break; case DRM_MODE_CONNECTOR_eDP: dev_warn(dev, "eDP panels moved to panel-edp\n"); - err = -EINVAL; - goto free_ddc; + return ERR_PTR(-EINVAL); case DRM_MODE_CONNECTOR_DSI: if (desc->bpc != 6 && desc->bpc != 8) dev_warn(dev, "Expected bpc in {6,8} but got: %u\n", desc->bpc); @@ -720,6 +676,49 @@ static struct panel_simple *panel_simple_probe(struct device *dev) break; } + panel = devm_drm_panel_alloc(dev, struct panel_simple, base, + &panel_simple_funcs, connector_type); + if (IS_ERR(panel)) + return ERR_CAST(panel); + + panel->desc = desc; + + panel->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(panel->supply)) + return ERR_CAST(panel->supply); + + panel->enable_gpio = devm_gpiod_get_optional(dev, "enable", + GPIOD_OUT_LOW); + if (IS_ERR(panel->enable_gpio)) + return dev_err_cast_probe(dev, panel->enable_gpio, + "failed to request GPIO\n"); + + err = of_drm_get_panel_orientation(dev->of_node, &panel->orientation); + if (err) { + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err); + return ERR_PTR(err); + } + + ddc = of_parse_phandle(dev->of_node, "ddc-i2c-bus", 0); + if (ddc) { + panel->ddc = of_find_i2c_adapter_by_node(ddc); + of_node_put(ddc); + + if (!panel->ddc) + return ERR_PTR(-EPROBE_DEFER); + } + + if (!of_device_is_compatible(dev->of_node, "panel-dpi") && + !of_get_display_timing(dev->of_node, "panel-timing", &dt)) + panel_simple_parse_panel_timing_node(dev, panel, &dt); + + if (desc->connector_type == DRM_MODE_CONNECTOR_LVDS) { + /* Optional data-mapping property for overriding bus format */ + err = panel_simple_override_nondefault_lvds_datamapping(dev, panel); + if (err) + goto free_ddc; + } + dev_set_drvdata(dev, panel); /* --- base-commit: ac3fd01e4c1efce8f2c054cdeb2ddd2fc0fb150d change-id: 20251121-lcd_panel_connector_type_fix-f00fe3766a42 Best regards, -- Ludovic Desroches <ludovic.desroches(a)microchip.com>

1 week

2
1
0 0

[PATCH 3/5] usb: ohci-nxp: fix device leak on probe failure

by Johan Hovold

Make sure to drop the reference taken when looking up the PHY I2C device during probe on probe failure (e.g. probe deferral) and on driver unbind. Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver") Cc: stable(a)vger.kernel.org # 3.5 Reported-by: Ma Ke <make24(a)iscas.ac.cn> Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/ Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/host/ohci-nxp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 24d5a1dc5056..9a05828bbba1 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -169,13 +169,13 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) - goto fail_disable; + goto err_put_client; dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { dev_err(&pdev->dev, "USB is disabled\n"); ret = -ENODEV; - goto fail_disable; + goto err_put_client; } /* Enable USB host clock */ @@ -183,7 +183,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_host_clk)) { dev_err(&pdev->dev, "failed to acquire and start USB OHCI clock\n"); ret = PTR_ERR(usb_host_clk); - goto fail_disable; + goto err_put_client; } isp1301_configure(); @@ -192,7 +192,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) if (!hcd) { dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; - goto fail_disable; + goto err_put_client; } hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); @@ -222,7 +222,8 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) ohci_nxp_stop_hc(); fail_resource: usb_put_hcd(hcd); -fail_disable: +err_put_client: + put_device(&isp1301_i2c_client->dev); isp1301_i2c_client = NULL; return ret; } @@ -234,6 +235,7 @@ static void ohci_hcd_nxp_remove(struct platform_device *pdev) usb_remove_hcd(hcd); ohci_nxp_stop_hc(); usb_put_hcd(hcd); + put_device(&isp1301_i2c_client->dev); isp1301_i2c_client = NULL; } -- 2.51.2

1 week

1
0
0 0

[PATCH 2/5] usb: phy: isp1301: fix non-OF device reference imbalance

by Johan Hovold

A recent change fixing a device reference leak in a UDC driver introduced a potential use-after-free in the non-OF case as the isp1301_get_client() helper only increases the reference count for the returned I2C device in the OF case. Increment the reference count also for non-OF so that the caller can decrement it unconditionally. Note that this is inherently racy just as using the returned I2C device is since nothing is preventing the PHY driver from being unbound while in use. Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe") Cc: stable(a)vger.kernel.org Cc: Ma Ke <make24(a)iscas.ac.cn> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/phy/phy-isp1301.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index f9b5c411aee4..2940f0c84e1b 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -149,7 +149,12 @@ struct i2c_client *isp1301_get_client(struct device_node *node) return client; /* non-DT: only one ISP1301 chip supported */ - return isp1301_i2c_client; + if (isp1301_i2c_client) { + get_device(&isp1301_i2c_client->dev); + return isp1301_i2c_client; + } + + return NULL; } EXPORT_SYMBOL_GPL(isp1301_get_client); -- 2.51.2

1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2025