February 2025 - Linux-stable-mirror

Please Apply: Revert "drm/amd/display: Fix green screen issue after suspend"

by Mingcong Bai

The display on Lenovo Xiaoxin Pro 13 2019 (Lenovo XiaoXinPro-13API 2019) briefly shows a garbled screen upon wakeup from S3 with kernel v6.13.2, but not with v6.14-rc1. I have bisected to 04d6273faed083e619fc39a738ab0372b6a4db20 ("Revert "drm/amd/display: Fix green screen issue after suspend"") as the fix to this issue. However, it is quite strange that the title indicated a revert to the fix for the exact issue I was experiencing - despite the commit claiming that the maintainers "cannot see the issue" any more. It seems that I'm running into some sort of unexpected issue that is outside of AMD's test case. In any case, this commit fixes the issue on the device I have tested and applies cleanly on 6.13. I would therefore like to request for this commit to be backported to 6.13 (and maybe other branches, but I think the maintainers may have a better idea on this). Reported-By: Yang Wu <harico(a)yurier.net> Tested-by: Yang Wu <harico(a)yurier.net> Suggested-by: Mingcong Bai <jeffbai(a)aosc.io>

5 months, 2 weeks

1
0
0 0

Re: The business loan-

by David Song

Hello, My name is David Song, at AA4 FS, we are a consultancy and brokerage Firm specializing in Growth Financial Loan and joint partnership venture. We specialize in investments in all Private and public sectors in a broad range of areas within our Financial Investment Services. We are experts in financial and operational management, due diligence and capital planning in all markets and industries. Our Investors wish to invest in any viable Project presented by your Management after reviews on your Business Project Presentation Plan. We look forward to your Swift response. We also offer commission to consultants and brokers for any partnership referrals. Regards, David Song Senior Broker AA4 Financial Services 13 Wonersh Way, Cheam, Sutton, Surrey, SM2 7LX Email: dsong(a)aa4financialservice.com

5 months, 2 weeks

1
0
0 0

[PATCH v9 05/13] drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready

by Aradhya Bhatia

From: Aradhya Bhatia <a-bhatia1(a)ti.com> Once the DSI Link and DSI Phy are initialized, the code needs to wait for Clk and Data Lanes to be ready, before continuing configuration. This is in accordance with the DSI Start-up procedure, found in the Technical Reference Manual of Texas Instrument's J721E SoC[0] which houses this DSI TX controller. If the previous bridge (or crtc/encoder) are configured pre-maturely, the input signal FIFO gets corrupt. This introduces a color-shift on the display. Allow the driver to wait for the clk and data lanes to get ready during DSI enable. [0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM TRM Link: http://www.ti.com/lit/pdf/spruil1 Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Cc: stable(a)vger.kernel.org Tested-by: Dominik Haller <d.haller(a)phytec.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Signed-off-by: Aradhya Bhatia <a-bhatia1(a)ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia(a)linux.dev> --- drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index 87921a748cdb..6a77ca36cb9d 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -769,7 +769,7 @@ static void cdns_dsi_bridge_enable(struct drm_bridge *bridge) struct phy_configure_opts_mipi_dphy *phy_cfg = &output->phy_opts.mipi_dphy; unsigned long tx_byte_period; struct cdns_dsi_cfg dsi_cfg; - u32 tmp, reg_wakeup, div; + u32 tmp, reg_wakeup, div, status; int nlanes; if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0)) @@ -786,6 +786,19 @@ static void cdns_dsi_bridge_enable(struct drm_bridge *bridge) cdns_dsi_hs_init(dsi); cdns_dsi_init_link(dsi); + /* + * Now that the DSI Link and DSI Phy are initialized, + * wait for the CLK and Data Lanes to be ready. + */ + tmp = CLK_LANE_RDY; + for (int i = 0; i < nlanes; i++) + tmp |= DATA_LANE_RDY(i); + + if (readl_poll_timeout(dsi->regs + MCTL_MAIN_STS, status, + (tmp == (status & tmp)), 100, 500000)) + dev_err(dsi->base.dev, + "Timed Out: DSI-DPhy Clock and Data Lanes not ready.\n"); + writel(HBP_LEN(dsi_cfg.hbp) | HSA_LEN(dsi_cfg.hsa), dsi->regs + VID_HSIZE1); writel(HFP_LEN(dsi_cfg.hfp) | HACT_LEN(dsi_cfg.hact), -- 2.34.1

5 months, 2 weeks

1
0
0 0

[PATCH v9 04/13] drm/bridge: cdns-dsi: Check return value when getting default PHY config

by Aradhya Bhatia

From: Aradhya Bhatia <a-bhatia1(a)ti.com> Check for the return value of the phy_mipi_dphy_get_default_config() call, and in case of an error, return back the same. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: stable(a)vger.kernel.org Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Aradhya Bhatia <a-bhatia1(a)ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia(a)linux.dev> --- drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index 19cc8734a4c8..87921a748cdb 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -575,9 +575,11 @@ static int cdns_dsi_check_conf(struct cdns_dsi *dsi, if (ret) return ret; - phy_mipi_dphy_get_default_config(mode_clock * 1000, - mipi_dsi_pixel_format_to_bpp(output->dev->format), - nlanes, phy_cfg); + ret = phy_mipi_dphy_get_default_config(mode_clock * 1000, + mipi_dsi_pixel_format_to_bpp(output->dev->format), + nlanes, phy_cfg); + if (ret) + return ret; ret = cdns_dsi_adjust_phy_config(dsi, dsi_cfg, phy_cfg, mode, mode_valid_check); if (ret) -- 2.34.1

5 months, 2 weeks

1
0
0 0

[PATCH v9 03/13] drm/bridge: cdns-dsi: Fix the clock variable for mode_valid()

by Aradhya Bhatia

From: Aradhya Bhatia <a-bhatia1(a)ti.com> The crtc_* mode parameters do not get generated (duplicated in this case) from the regular parameters before the mode validation phase begins. The rest of the code conditionally uses the crtc_* parameters only during the bridge enable phase, but sticks to the regular parameters for mode validation. In this singular instance, however, the driver tries to use the crtc_clock parameter even during the mode validation, causing the validation to fail. Allow the D-Phy config checks to use mode->clock instead of mode->crtc_clock during mode_valid checks, like everywhere else in the driver. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: stable(a)vger.kernel.org Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Aradhya Bhatia <a-bhatia1(a)ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia(a)linux.dev> --- drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index b0a1a6774ea6..19cc8734a4c8 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -568,13 +568,14 @@ static int cdns_dsi_check_conf(struct cdns_dsi *dsi, struct phy_configure_opts_mipi_dphy *phy_cfg = &output->phy_opts.mipi_dphy; unsigned long dsi_hss_hsa_hse_hbp; unsigned int nlanes = output->dev->lanes; + int mode_clock = (mode_valid_check ? mode->clock : mode->crtc_clock); int ret; ret = cdns_dsi_mode2cfg(dsi, mode, dsi_cfg, mode_valid_check); if (ret) return ret; - phy_mipi_dphy_get_default_config(mode->crtc_clock * 1000, + phy_mipi_dphy_get_default_config(mode_clock * 1000, mipi_dsi_pixel_format_to_bpp(output->dev->format), nlanes, phy_cfg); -- 2.34.1

5 months, 2 weeks

1
0
0 0

[PATCH v9 02/13] drm/bridge: cdns-dsi: Fix phy de-init and flag it so

by Aradhya Bhatia

From: Aradhya Bhatia <a-bhatia1(a)ti.com> The driver code doesn't have a Phy de-initialization path as yet, and so it does not clear the phy_initialized flag while suspending. This is a problem because after resume the driver looks at this flag to determine if a Phy re-initialization is required or not. It is in fact required because the hardware is resuming from a suspend, but the driver does not carry out any re-initialization causing the D-Phy to not work at all. Call the counterparts of phy_init() and phy_power_on(), that are phy_exit() and phy_power_off(), from _bridge_post_disable(), and clear the flags so that the Phy can be initialized again when required. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: stable(a)vger.kernel.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Signed-off-by: Aradhya Bhatia <a-bhatia1(a)ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia(a)linux.dev> --- drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index 2f897ea5e80a..b0a1a6774ea6 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -680,6 +680,11 @@ static void cdns_dsi_bridge_post_disable(struct drm_bridge *bridge) struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge); struct cdns_dsi *dsi = input_to_dsi(input); + dsi->phy_initialized = false; + dsi->link_initialized = false; + phy_power_off(dsi->dphy); + phy_exit(dsi->dphy); + pm_runtime_put(dsi->base.dev); } @@ -1152,7 +1157,6 @@ static int __maybe_unused cdns_dsi_suspend(struct device *dev) clk_disable_unprepare(dsi->dsi_sys_clk); clk_disable_unprepare(dsi->dsi_p_clk); reset_control_assert(dsi->dsi_p_rst); - dsi->link_initialized = false; return 0; } -- 2.34.1

5 months, 2 weeks

1
0
0 0

[PATCH v9 01/13] drm/bridge: cdns-dsi: Fix connecting to next bridge

by Aradhya Bhatia

From: Aradhya Bhatia <a-bhatia1(a)ti.com> Fix the OF node pointer passed to the of_drm_find_bridge() call to find the next bridge in the display chain. The code to find the next panel (and create its panel-bridge) works fine, but to find the next (non-panel) bridge does not. To find the next bridge in the pipeline, we need to pass "np" - the OF node pointer of the next entity in the devicetree chain. Passing "of_node" to of_drm_find_bridge (which is what the code does currently) will fetch the bridge for the cdns-dsi which is not what's required. Fix that. Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Cc: stable(a)vger.kernel.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Signed-off-by: Aradhya Bhatia <a-bhatia1(a)ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia(a)linux.dev> --- drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index c7a0247e06ad..2f897ea5e80a 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -952,7 +952,7 @@ static int cdns_dsi_attach(struct mipi_dsi_host *host, bridge = drm_panel_bridge_add_typed(panel, DRM_MODE_CONNECTOR_DSI); } else { - bridge = of_drm_find_bridge(dev->dev.of_node); + bridge = of_drm_find_bridge(np); if (!bridge) bridge = ERR_PTR(-EINVAL); } -- 2.34.1

5 months, 2 weeks

1
0
0 0

[char-misc] mei: me: add panther lake P DID

by Alexander Usyskin

Add Panther Lake P device id. Cc: <stable(a)vger.kernel.org> Co-developed-by: Tomas Winkler <tomasw(a)gmail.com> Signed-off-by: Tomas Winkler <tomasw(a)gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin(a)intel.com> --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index c3a6657dcd4a..a5f88ec97df7 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -117,6 +117,8 @@ #define MEI_DEV_ID_LNL_M 0xA870 /* Lunar Lake Point M */ +#define MEI_DEV_ID_PTL_P 0xE470 /* Panther Lake P */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 6589635f8ba3..d6ff9d82ae94 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -124,6 +124,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_LNL_M, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_PTL_P, MEI_ME_PCH15_CFG)}, + /* required last entry */ {0, } }; -- 2.43.0

5 months, 2 weeks

1
0
0 0

[PATCH] crypto: ccp - Fix check for the primary ASP device

by Tom Lendacky

Currently, the ASP primary device check does not have support for PCI domains, and, as a result, when the system is configured with PCI domains (PCI segments) the wrong device can be selected as primary. This results in commands submitted to the device timing out and failing. The device check also relies on specific device and function assignments that may not hold in the future. Fix the primary ASP device check to include support for PCI domains and to perform proper checking of the Bus/Device/Function positions. Fixes: 2a6170dfe755 ("crypto: ccp: Add Platform Security Processor (PSP) device support") Cc: stable(a)vger.kernel.org Signed-off-by: Tom Lendacky <thomas.lendacky(a)amd.com> --- drivers/crypto/ccp/sp-pci.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/crypto/ccp/sp-pci.c b/drivers/crypto/ccp/sp-pci.c index 248d98fd8c48..157f9a9ed636 100644 --- a/drivers/crypto/ccp/sp-pci.c +++ b/drivers/crypto/ccp/sp-pci.c @@ -189,14 +189,17 @@ static bool sp_pci_is_master(struct sp_device *sp) pdev_new = to_pci_dev(dev_new); pdev_cur = to_pci_dev(dev_cur); - if (pdev_new->bus->number < pdev_cur->bus->number) - return true; + if (pci_domain_nr(pdev_new->bus) != pci_domain_nr(pdev_cur->bus)) + return pci_domain_nr(pdev_new->bus) < pci_domain_nr(pdev_cur->bus); - if (PCI_SLOT(pdev_new->devfn) < PCI_SLOT(pdev_cur->devfn)) - return true; + if (pdev_new->bus->number != pdev_cur->bus->number) + return pdev_new->bus->number < pdev_cur->bus->number; - if (PCI_FUNC(pdev_new->devfn) < PCI_FUNC(pdev_cur->devfn)) - return true; + if (PCI_SLOT(pdev_new->devfn) != PCI_SLOT(pdev_cur->devfn)) + return PCI_SLOT(pdev_new->devfn) < PCI_SLOT(pdev_cur->devfn); + + if (PCI_FUNC(pdev_new->devfn) != PCI_FUNC(pdev_cur->devfn)) + return PCI_FUNC(pdev_new->devfn) < PCI_FUNC(pdev_cur->devfn); return false; } base-commit: cd26cd65476711e2c69e0a049c0eeef4b743f5ac -- 2.46.2

5 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] tty: xilinx_uartps: split sysrq handling" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x b06f388994500297bb91be60ffaf6825ecfd2afe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020900-irritate-payphone-afbb@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b06f388994500297bb91be60ffaf6825ecfd2afe Mon Sep 17 00:00:00 2001 From: Sean Anderson <sean.anderson(a)linux.dev> Date: Fri, 10 Jan 2025 16:38:22 -0500 Subject: [PATCH] tty: xilinx_uartps: split sysrq handling lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock. Fixes: 74ea66d4ca06 ("tty: xuartps: Improve sysrq handling") Signed-off-by: Sean Anderson <sean.anderson(a)linux.dev> Cc: stable(a)vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers Acked-by: John Ogness <john.ogness(a)linutronix.de> Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index beb151be4d32..92ec51870d1d 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -287,7 +287,7 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) continue; } - if (uart_handle_sysrq_char(port, data)) + if (uart_prepare_sysrq_char(port, data)) continue; if (is_rxbs_support) { @@ -495,7 +495,7 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id) !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS)) cdns_uart_handle_rx(dev_id, isrstatus); - uart_port_unlock(port); + uart_unlock_and_check_sysrq(port); return IRQ_HANDLED; } @@ -1380,9 +1380,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, unsigned int imr, ctrl; int locked = 1; - if (port->sysrq) - locked = 0; - else if (oops_in_progress) + if (oops_in_progress) locked = uart_port_trylock_irqsave(port, &flags); else uart_port_lock_irqsave(port, &flags);

5 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] tty: xilinx_uartps: split sysrq handling" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x b06f388994500297bb91be60ffaf6825ecfd2afe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020957-proofs-smilingly-7fac@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b06f388994500297bb91be60ffaf6825ecfd2afe Mon Sep 17 00:00:00 2001 From: Sean Anderson <sean.anderson(a)linux.dev> Date: Fri, 10 Jan 2025 16:38:22 -0500 Subject: [PATCH] tty: xilinx_uartps: split sysrq handling lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock. Fixes: 74ea66d4ca06 ("tty: xuartps: Improve sysrq handling") Signed-off-by: Sean Anderson <sean.anderson(a)linux.dev> Cc: stable(a)vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers Acked-by: John Ogness <john.ogness(a)linutronix.de> Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index beb151be4d32..92ec51870d1d 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -287,7 +287,7 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) continue; } - if (uart_handle_sysrq_char(port, data)) + if (uart_prepare_sysrq_char(port, data)) continue; if (is_rxbs_support) { @@ -495,7 +495,7 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id) !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS)) cdns_uart_handle_rx(dev_id, isrstatus); - uart_port_unlock(port); + uart_unlock_and_check_sysrq(port); return IRQ_HANDLED; } @@ -1380,9 +1380,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, unsigned int imr, ctrl; int locked = 1; - if (port->sysrq) - locked = 0; - else if (oops_in_progress) + if (oops_in_progress) locked = uart_port_trylock_irqsave(port, &flags); else uart_port_lock_irqsave(port, &flags);

5 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] tty: xilinx_uartps: split sysrq handling" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x b06f388994500297bb91be60ffaf6825ecfd2afe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020955-handbook-simplify-cf71@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b06f388994500297bb91be60ffaf6825ecfd2afe Mon Sep 17 00:00:00 2001 From: Sean Anderson <sean.anderson(a)linux.dev> Date: Fri, 10 Jan 2025 16:38:22 -0500 Subject: [PATCH] tty: xilinx_uartps: split sysrq handling lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock. Fixes: 74ea66d4ca06 ("tty: xuartps: Improve sysrq handling") Signed-off-by: Sean Anderson <sean.anderson(a)linux.dev> Cc: stable(a)vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers Acked-by: John Ogness <john.ogness(a)linutronix.de> Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index beb151be4d32..92ec51870d1d 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -287,7 +287,7 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) continue; } - if (uart_handle_sysrq_char(port, data)) + if (uart_prepare_sysrq_char(port, data)) continue; if (is_rxbs_support) { @@ -495,7 +495,7 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id) !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS)) cdns_uart_handle_rx(dev_id, isrstatus); - uart_port_unlock(port); + uart_unlock_and_check_sysrq(port); return IRQ_HANDLED; } @@ -1380,9 +1380,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, unsigned int imr, ctrl; int locked = 1; - if (port->sysrq) - locked = 0; - else if (oops_in_progress) + if (oops_in_progress) locked = uart_port_trylock_irqsave(port, &flags); else uart_port_lock_irqsave(port, &flags);

5 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] tty: xilinx_uartps: split sysrq handling" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x b06f388994500297bb91be60ffaf6825ecfd2afe # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020952-saline-reprimand-8184@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b06f388994500297bb91be60ffaf6825ecfd2afe Mon Sep 17 00:00:00 2001 From: Sean Anderson <sean.anderson(a)linux.dev> Date: Fri, 10 Jan 2025 16:38:22 -0500 Subject: [PATCH] tty: xilinx_uartps: split sysrq handling lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock. Fixes: 74ea66d4ca06 ("tty: xuartps: Improve sysrq handling") Signed-off-by: Sean Anderson <sean.anderson(a)linux.dev> Cc: stable(a)vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers Acked-by: John Ogness <john.ogness(a)linutronix.de> Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index beb151be4d32..92ec51870d1d 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -287,7 +287,7 @@ static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) continue; } - if (uart_handle_sysrq_char(port, data)) + if (uart_prepare_sysrq_char(port, data)) continue; if (is_rxbs_support) { @@ -495,7 +495,7 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id) !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS)) cdns_uart_handle_rx(dev_id, isrstatus); - uart_port_unlock(port); + uart_unlock_and_check_sysrq(port); return IRQ_HANDLED; } @@ -1380,9 +1380,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, unsigned int imr, ctrl; int locked = 1; - if (port->sysrq) - locked = 0; - else if (oops_in_progress) + if (oops_in_progress) locked = uart_port_trylock_irqsave(port, &flags); else uart_port_lock_irqsave(port, &flags);

5 months, 2 weeks

1
0
0 0

Re: The business loan-

by David Song

Hello, My name is David Song, at AA4 FS, we are a consultancy and brokerage Firm specializing in Growth Financial Loan and joint partnership venture. We specialize in investments in all Private and public sectors in a broad range of areas within our Financial Investment Services. We are experts in financial and operational management, due diligence and capital planning in all markets and industries. Our Investors wish to invest in any viable Project presented by your Management after reviews on your Business Project Presentation Plan. We look forward to your Swift response. We also offer commission to consultants and brokers for any partnership referrals. Regards, David Song Senior Broker AA4 Financial Services 13 Wonersh Way, Cheam, Sutton, Surrey, SM2 7LX Email: dsong(a)aa4financialservice.com

5 months, 3 weeks

1
0
0 0

[PATCH v2] tpm: do not start chip while suspended

by Thadeu Lima de Souza Cascardo

Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can lead to a spurious tpm_chip_start() call: [35985.503771] i2c i2c-1: Transfer while suspended [35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810 [35985.503802] Modules linked in: [35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f [35985.503814] Tainted: [W]=WARN [35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810 [35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5 [35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246 [35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000 [35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001 [35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820 [35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120 [35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000 [35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0 [35985.503855] Call Trace: [35985.503859] <TASK> [35985.503863] ? __warn+0xd4/0x260 [35985.503868] ? __i2c_transfer+0xbe/0x810 [35985.503874] ? report_bug+0xf3/0x210 [35985.503882] ? handle_bug+0x63/0xb0 [35985.503887] ? exc_invalid_op+0x16/0x50 [35985.503892] ? asm_exc_invalid_op+0x16/0x20 [35985.503904] ? __i2c_transfer+0xbe/0x810 [35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0 [35985.503920] tpm_cr50_i2c_read+0x8e/0x120 [35985.503928] tpm_cr50_request_locality+0x75/0x170 [35985.503935] tpm_chip_start+0x116/0x160 [35985.503942] tpm_try_get_ops+0x57/0x90 [35985.503948] tpm_find_get_ops+0x26/0xd0 [35985.503955] tpm_get_random+0x2d/0x80 Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in such a failure case. Fixes: 9265fed6db60 ("tpm: Lock TPM chip in tpm_pm_suspend() first") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com> Cc: stable(a)vger.kernel.org Cc: Jerry Snitselaar <jsnitsel(a)redhat.com> Cc: Mike Seo <mikeseohyungjin(a)gmail.com> Cc: Jarkko Sakkinen <jarkko(a)kernel.org> --- Changes in v2: - Improve commit message as suggested by Jarkko Sakkinen. - Link to v1: https://lore.kernel.org/r/20250205-tpm-suspend-v1-1-fb89a29c0b69@igalia.com --- drivers/char/tpm/tpm-chip.c | 5 +++++ drivers/char/tpm/tpm-interface.c | 7 ------- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c index 7df7abaf3e526bf7e85ac9dfbaa1087a51d2ab7e..6db864696a583bf59c534ec8714900a6be7b5156 100644 --- a/drivers/char/tpm/tpm-chip.c +++ b/drivers/char/tpm/tpm-chip.c @@ -168,6 +168,11 @@ int tpm_try_get_ops(struct tpm_chip *chip) goto out_ops; mutex_lock(&chip->tpm_mutex); + + /* tmp_chip_start may issue IO that is denied while suspended */ + if (chip->flags & TPM_CHIP_FLAG_SUSPENDED) + goto out_lock; + rc = tpm_chip_start(chip); if (rc) goto out_lock; diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c index b1daa0d7b341b1a4c71a200115f0d29d2e87512d..f62f7871edbdb0181fad8af3367878308fa8a454 100644 --- a/drivers/char/tpm/tpm-interface.c +++ b/drivers/char/tpm/tpm-interface.c @@ -445,18 +445,11 @@ int tpm_get_random(struct tpm_chip *chip, u8 *out, size_t max) if (!chip) return -ENODEV; - /* Give back zero bytes, as TPM chip has not yet fully resumed: */ - if (chip->flags & TPM_CHIP_FLAG_SUSPENDED) { - rc = 0; - goto out; - } - if (chip->flags & TPM_CHIP_FLAG_TPM2) rc = tpm2_get_random(chip, out, max); else rc = tpm1_get_random(chip, out, max); -out: tpm_put_ops(chip); return rc; } --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250205-tpm-suspend-b22f745f3124 Best regards, -- Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com>

5 months, 3 weeks

3
2
0 0

[PATCH 5.10.y 1/2] netdevsim: print human readable IP address

by Harshit Mogalapalli

From: Hangbin Liu <liuhangbin(a)gmail.com> [ Upstream commit c71bc6da6198a6d88df86094f1052bb581951d65 ] Currently, IPSec addresses are printed in hexadecimal format, which is not user-friendly. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] rx ipaddr=0x00000000 00000000 00000000 0100a8c0 sa[0] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[1] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 This patch updates the code to print the IPSec address in a human-readable format for easier debug. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=4 tx=40 sa[0] tx ipaddr=0.0.0.0 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 sa[2] tx ipaddr=:: sa[2] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[2] key=0x3167608a ca4f1397 43565909 941fa627 sa[3] rx ipaddr=2000::1 sa[3] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[3] key=0x3167608a ca4f1397 43565909 941fa627 Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Link: https://patch.msgid.link/20241010040027.21440-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> (cherry picked from commit c71bc6da6198a6d88df86094f1052bb581951d65) [Harshit: backport to stable kernels] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> --- drivers/net/netdevsim/ipsec.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/netdevsim/ipsec.c b/drivers/net/netdevsim/ipsec.c index feca55eef993..ec1fc1d3ea36 100644 --- a/drivers/net/netdevsim/ipsec.c +++ b/drivers/net/netdevsim/ipsec.c @@ -39,10 +39,14 @@ static ssize_t nsim_dbg_netdev_ops_read(struct file *filp, if (!sap->used) continue; - p += scnprintf(p, bufsize - (p - buf), - "sa[%i] %cx ipaddr=0x%08x %08x %08x %08x\n", - i, (sap->rx ? 'r' : 't'), sap->ipaddr[0], - sap->ipaddr[1], sap->ipaddr[2], sap->ipaddr[3]); + if (sap->xs->props.family == AF_INET6) + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI6c\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr); + else + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI4\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr[3]); p += scnprintf(p, bufsize - (p - buf), "sa[%i] spi=0x%08x proto=0x%x salt=0x%08x crypt=%d\n", i, be32_to_cpu(sap->xs->id.spi), -- 2.46.0

5 months, 3 weeks

1
1
0 0

[PATCH 5.15.y 1/2] netdevsim: print human readable IP address

by Harshit Mogalapalli

From: Hangbin Liu <liuhangbin(a)gmail.com> [ Upstream commit c71bc6da6198a6d88df86094f1052bb581951d65 ] Currently, IPSec addresses are printed in hexadecimal format, which is not user-friendly. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] rx ipaddr=0x00000000 00000000 00000000 0100a8c0 sa[0] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[1] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 This patch updates the code to print the IPSec address in a human-readable format for easier debug. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=4 tx=40 sa[0] tx ipaddr=0.0.0.0 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 sa[2] tx ipaddr=:: sa[2] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[2] key=0x3167608a ca4f1397 43565909 941fa627 sa[3] rx ipaddr=2000::1 sa[3] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[3] key=0x3167608a ca4f1397 43565909 941fa627 Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Link: https://patch.msgid.link/20241010040027.21440-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> (cherry picked from commit c71bc6da6198a6d88df86094f1052bb581951d65) [Harshit: backport to stable kernels] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> --- drivers/net/netdevsim/ipsec.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/netdevsim/ipsec.c b/drivers/net/netdevsim/ipsec.c index feca55eef993..ec1fc1d3ea36 100644 --- a/drivers/net/netdevsim/ipsec.c +++ b/drivers/net/netdevsim/ipsec.c @@ -39,10 +39,14 @@ static ssize_t nsim_dbg_netdev_ops_read(struct file *filp, if (!sap->used) continue; - p += scnprintf(p, bufsize - (p - buf), - "sa[%i] %cx ipaddr=0x%08x %08x %08x %08x\n", - i, (sap->rx ? 'r' : 't'), sap->ipaddr[0], - sap->ipaddr[1], sap->ipaddr[2], sap->ipaddr[3]); + if (sap->xs->props.family == AF_INET6) + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI6c\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr); + else + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI4\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr[3]); p += scnprintf(p, bufsize - (p - buf), "sa[%i] spi=0x%08x proto=0x%x salt=0x%08x crypt=%d\n", i, be32_to_cpu(sap->xs->id.spi), -- 2.46.0

5 months, 3 weeks

1
1
0 0

[PATCH] mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec

by Christian Marangi

Fix broken config in qcom_param_page_type_exec caused by copy-paste error from commit 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK") In qcom_param_page_type_exec the value needs to be set to nandc->regs->cfg0 instead of host->cfg0. This wrong configuration caused the Qcom NANDC driver to malfunction on any device that makes use of it (IPQ806x, IPQ40xx, IPQ807x, IPQ60xx) with the following error: [ 0.885369] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa [ 0.885909] nand: Micron NAND 256MiB 1,8V 8-bit [ 0.892499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.896823] nand: ECC (step, strength) = (512, 8) does not fit in OOB [ 0.896836] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible [ 0.910996] bam-dma-engine 7984000.dma-controller: Cannot free busy channel [ 0.918070] qcom-nandc: probe of 79b0000.nand-controller failed with error -28 Restore original configuration fix the problem and makes the driver work again. Cc: stable(a)vger.kernel.org Fixes: 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> --- drivers/mtd/nand/raw/qcom_nandc.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index d2d2aeee42a7..4e3a3e049d9d 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -1881,18 +1881,18 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_ nandc->regs->addr0 = 0; nandc->regs->addr1 = 0; - host->cfg0 = FIELD_PREP(CW_PER_PAGE_MASK, 0) | - FIELD_PREP(UD_SIZE_BYTES_MASK, 512) | - FIELD_PREP(NUM_ADDR_CYCLES_MASK, 5) | - FIELD_PREP(SPARE_SIZE_BYTES_MASK, 0); - - host->cfg1 = FIELD_PREP(NAND_RECOVERY_CYCLES_MASK, 7) | - FIELD_PREP(BAD_BLOCK_BYTE_NUM_MASK, 17) | - FIELD_PREP(CS_ACTIVE_BSY, 0) | - FIELD_PREP(BAD_BLOCK_IN_SPARE_AREA, 1) | - FIELD_PREP(WR_RD_BSY_GAP_MASK, 2) | - FIELD_PREP(WIDE_FLASH, 0) | - FIELD_PREP(DEV0_CFG1_ECC_DISABLE, 1); + nandc->regs->cfg0 = FIELD_PREP(CW_PER_PAGE_MASK, 0) | + FIELD_PREP(UD_SIZE_BYTES_MASK, 512) | + FIELD_PREP(NUM_ADDR_CYCLES_MASK, 5) | + FIELD_PREP(SPARE_SIZE_BYTES_MASK, 0); + + nandc->regs->cfg1 = FIELD_PREP(NAND_RECOVERY_CYCLES_MASK, 7) | + FIELD_PREP(BAD_BLOCK_BYTE_NUM_MASK, 17) | + FIELD_PREP(CS_ACTIVE_BSY, 0) | + FIELD_PREP(BAD_BLOCK_IN_SPARE_AREA, 1) | + FIELD_PREP(WR_RD_BSY_GAP_MASK, 2) | + FIELD_PREP(WIDE_FLASH, 0) | + FIELD_PREP(DEV0_CFG1_ECC_DISABLE, 1); if (!nandc->props->qpic_version2) nandc->regs->ecc_buf_cfg = cpu_to_le32(ECC_CFG_ECC_DISABLE); -- 2.47.1

5 months, 3 weeks

3
2
0 0

[PATCH 6.1.y 1/2] netdevsim: print human readable IP address

by Harshit Mogalapalli

From: Hangbin Liu <liuhangbin(a)gmail.com> [ Upstream commit c71bc6da6198a6d88df86094f1052bb581951d65 ] Currently, IPSec addresses are printed in hexadecimal format, which is not user-friendly. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] rx ipaddr=0x00000000 00000000 00000000 0100a8c0 sa[0] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[1] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 This patch updates the code to print the IPSec address in a human-readable format for easier debug. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=4 tx=40 sa[0] tx ipaddr=0.0.0.0 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 sa[2] tx ipaddr=:: sa[2] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[2] key=0x3167608a ca4f1397 43565909 941fa627 sa[3] rx ipaddr=2000::1 sa[3] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[3] key=0x3167608a ca4f1397 43565909 941fa627 Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Link: https://patch.msgid.link/20241010040027.21440-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> (cherry picked from commit c71bc6da6198a6d88df86094f1052bb581951d65) [Harshit: backport to stable kernels] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> --- drivers/net/netdevsim/ipsec.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/netdevsim/ipsec.c b/drivers/net/netdevsim/ipsec.c index feca55eef993..ec1fc1d3ea36 100644 --- a/drivers/net/netdevsim/ipsec.c +++ b/drivers/net/netdevsim/ipsec.c @@ -39,10 +39,14 @@ static ssize_t nsim_dbg_netdev_ops_read(struct file *filp, if (!sap->used) continue; - p += scnprintf(p, bufsize - (p - buf), - "sa[%i] %cx ipaddr=0x%08x %08x %08x %08x\n", - i, (sap->rx ? 'r' : 't'), sap->ipaddr[0], - sap->ipaddr[1], sap->ipaddr[2], sap->ipaddr[3]); + if (sap->xs->props.family == AF_INET6) + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI6c\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr); + else + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI4\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr[3]); p += scnprintf(p, bufsize - (p - buf), "sa[%i] spi=0x%08x proto=0x%x salt=0x%08x crypt=%d\n", i, be32_to_cpu(sap->xs->id.spi), -- 2.46.0

5 months, 3 weeks

1
1
0 0

[PATCH 6.6.y 1/2] netdevsim: print human readable IP address

by Harshit Mogalapalli

From: Hangbin Liu <liuhangbin(a)gmail.com> [ Upstream commit c71bc6da6198a6d88df86094f1052bb581951d65 ] Currently, IPSec addresses are printed in hexadecimal format, which is not user-friendly. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] rx ipaddr=0x00000000 00000000 00000000 0100a8c0 sa[0] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[1] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 This patch updates the code to print the IPSec address in a human-readable format for easier debug. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=4 tx=40 sa[0] tx ipaddr=0.0.0.0 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 sa[2] tx ipaddr=:: sa[2] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[2] key=0x3167608a ca4f1397 43565909 941fa627 sa[3] rx ipaddr=2000::1 sa[3] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[3] key=0x3167608a ca4f1397 43565909 941fa627 Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Link: https://patch.msgid.link/20241010040027.21440-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> (cherry picked from commit c71bc6da6198a6d88df86094f1052bb581951d65) [Harshit: backport to stable kernels] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> --- drivers/net/netdevsim/ipsec.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/netdevsim/ipsec.c b/drivers/net/netdevsim/ipsec.c index 3612b0633bd1..88187dd4eb2d 100644 --- a/drivers/net/netdevsim/ipsec.c +++ b/drivers/net/netdevsim/ipsec.c @@ -39,10 +39,14 @@ static ssize_t nsim_dbg_netdev_ops_read(struct file *filp, if (!sap->used) continue; - p += scnprintf(p, bufsize - (p - buf), - "sa[%i] %cx ipaddr=0x%08x %08x %08x %08x\n", - i, (sap->rx ? 'r' : 't'), sap->ipaddr[0], - sap->ipaddr[1], sap->ipaddr[2], sap->ipaddr[3]); + if (sap->xs->props.family == AF_INET6) + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI6c\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr); + else + p += scnprintf(p, bufsize - (p - buf), + "sa[%i] %cx ipaddr=%pI4\n", + i, (sap->rx ? 'r' : 't'), &sap->ipaddr[3]); p += scnprintf(p, bufsize - (p - buf), "sa[%i] spi=0x%08x proto=0x%x salt=0x%08x crypt=%d\n", i, be32_to_cpu(sap->xs->id.spi), -- 2.46.0

5 months, 3 weeks

1
1
0 0

[PATCH net 6/6] can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated

by Marc Kleine-Budde

From: Robin van der Gracht <robin(a)protonic.nl> Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to bail out if skb cannot be allocated. Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Cc: stable(a)vger.kernel.org Signed-off-by: Robin van der Gracht <robin(a)protonic.nl> Link: https://patch.msgid.link/20250208-fix-rockchip-canfd-v1-1-ec533c8a9895@peng… Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/rockchip/rockchip_canfd-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/rockchip/rockchip_canfd-core.c b/drivers/net/can/rockchip/rockchip_canfd-core.c index df18c85fc078..d9a937ba126c 100644 --- a/drivers/net/can/rockchip/rockchip_canfd-core.c +++ b/drivers/net/can/rockchip/rockchip_canfd-core.c @@ -622,7 +622,7 @@ rkcanfd_handle_rx_fifo_overflow_int(struct rkcanfd_priv *priv) netdev_dbg(priv->ndev, "RX-FIFO overflow\n"); skb = rkcanfd_alloc_can_err_skb(priv, &cf, &timestamp); - if (skb) + if (!skb) return 0; rkcanfd_get_berr_counter_corrected(priv, &bec); -- 2.47.2

5 months, 3 weeks

1
0
0 0

[PATCH net 5/6] can: etas_es58x: fix potential NULL pointer dereference on udev->serial

by Marc Kleine-Budde

From: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> The driver assumed that es58x_dev->udev->serial could never be NULL. While this is true on commercially available devices, an attacker could spoof the device identity providing a NULL USB serial number. That would trigger a NULL pointer dereference. Add a check on es58x_dev->udev->serial before accessing it. Reported-by: yan kang <kangyan91(a)outlook.com> Reported-by: yue sun <samsun1006219(a)gmail.com> Closes: https://lore.kernel.org/linux-can/SY8P300MB0421E0013C0EBD2AA46BA709A1F42@SY… Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()") Signed-off-by: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> Link: https://patch.msgid.link/20250204154859.9797-2-mailhol.vincent@wanadoo.fr Cc: stable(a)vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/usb/etas_es58x/es58x_devlink.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/usb/etas_es58x/es58x_devlink.c b/drivers/net/can/usb/etas_es58x/es58x_devlink.c index eee20839d96f..0d155eb1b9e9 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_devlink.c +++ b/drivers/net/can/usb/etas_es58x/es58x_devlink.c @@ -248,7 +248,11 @@ static int es58x_devlink_info_get(struct devlink *devlink, return ret; } - return devlink_info_serial_number_put(req, es58x_dev->udev->serial); + if (es58x_dev->udev->serial) + ret = devlink_info_serial_number_put(req, + es58x_dev->udev->serial); + + return ret; } const struct devlink_ops es58x_dl_ops = { -- 2.47.2

5 months, 3 weeks

1
0
0 0

[PATCH net 4/6] can: c_can: fix unbalanced runtime PM disable in error path

by Marc Kleine-Budde

From: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Runtime PM is enabled as one of the last steps of probe(), so all earlier gotos to "exit_free_device" label were not correct and were leading to unbalanced runtime PM disable depth. Fixes: 6e2fe01dd6f9 ("can: c_can: move runtime PM enable/disable to c_can_platform") Cc: stable(a)vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Reviewed-by: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f… Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/c_can/c_can_platform.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 6cba9717a6d8..399844809bbe 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -385,15 +385,16 @@ static int c_can_plat_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "registering %s failed (err=%d)\n", KBUILD_MODNAME, ret); - goto exit_free_device; + goto exit_pm_runtime; } dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n", KBUILD_MODNAME, priv->base, dev->irq); return 0; -exit_free_device: +exit_pm_runtime: pm_runtime_disable(priv->device); +exit_free_device: free_c_can_dev(dev); exit: dev_err(&pdev->dev, "probe failed\n"); -- 2.47.2

5 months, 3 weeks

1
0
0 0

[PATCH net 3/6] can: ctucanfd: handle skb allocation failure

by Marc Kleine-Budde

From: Fedor Pchelkin <pchelkin(a)ispras.ru> If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable(a)vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> Acked-by: Pavel Pisa <pisa(a)cmp.felk.cvut.cz> Reviewed-by: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> Link: https://patch.msgid.link/20250114152138.139580-1-pchelkin@ispras.ru Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/ctucanfd/ctucanfd_base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c index 64c349fd4600..f65c1a1e05cc 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_base.c +++ b/drivers/net/can/ctucanfd/ctucanfd_base.c @@ -867,10 +867,12 @@ static void ctucan_err_interrupt(struct net_device *ndev, u32 isr) } break; case CAN_STATE_ERROR_ACTIVE: - cf->can_id |= CAN_ERR_CNT; - cf->data[1] = CAN_ERR_CRTL_ACTIVE; - cf->data[6] = bec.txerr; - cf->data[7] = bec.rxerr; + if (skb) { + cf->can_id |= CAN_ERR_CNT; + cf->data[1] = CAN_ERR_CRTL_ACTIVE; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + } break; default: netdev_warn(ndev, "unhandled error state (%d:%s)!\n", -- 2.47.2

5 months, 3 weeks

1
0
0 0

[PATCH net 2/6] can: j1939: j1939_sk_send_loop(): fix unable to send messages with data length zero

by Marc Kleine-Budde

From: Alexander Hölzl <alexander.hoelzl(a)gmx.net> The J1939 standard requires the transmission of messages of length 0. For example proprietary messages are specified with a data length of 0 to 1785. The transmission of such messages is not possible. Sending results in no error being returned but no corresponding can frame being generated. Enable the transmission of zero length J1939 messages. In order to facilitate this two changes are necessary: 1) If the transmission of a new message is requested from user space the message is segmented in j1939_sk_send_loop(). Let the segmentation take into account zero length messages, do not terminate immediately, queue the corresponding skb. 2) j1939_session_skb_get_by_offset() selects the next skb to transmit for a session. Take into account that there might be zero length skbs in the queue. Signed-off-by: Alexander Hölzl <alexander.hoelzl(a)gmx.net> Acked-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable(a)vger.kernel.org [mkl: commit message rephrased] Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- net/can/j1939/socket.c | 4 ++-- net/can/j1939/transport.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c index 305dd72c844c..17226b2341d0 100644 --- a/net/can/j1939/socket.c +++ b/net/can/j1939/socket.c @@ -1132,7 +1132,7 @@ static int j1939_sk_send_loop(struct j1939_priv *priv, struct sock *sk, todo_size = size; - while (todo_size) { + do { struct j1939_sk_buff_cb *skcb; segment_size = min_t(size_t, J1939_MAX_TP_PACKET_SIZE, @@ -1177,7 +1177,7 @@ static int j1939_sk_send_loop(struct j1939_priv *priv, struct sock *sk, todo_size -= segment_size; session->total_queued_size += segment_size; - } + } while (todo_size); switch (ret) { case 0: /* OK */ diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index 95f7a7e65a73..9b72d118d756 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -382,8 +382,9 @@ sk_buff *j1939_session_skb_get_by_offset(struct j1939_session *session, skb_queue_walk(&session->skb_queue, do_skb) { do_skcb = j1939_skb_to_cb(do_skb); - if (offset_start >= do_skcb->offset && - offset_start < (do_skcb->offset + do_skb->len)) { + if ((offset_start >= do_skcb->offset && + offset_start < (do_skcb->offset + do_skb->len)) || + (offset_start == 0 && do_skcb->offset == 0 && do_skb->len == 0)) { skb = do_skb; } } -- 2.47.2

5 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025