From: Oleg Nesterov <oleg(a)redhat.com>
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
[ Upstream commit 5097cbcb38e6e0d2627c9dde1985e91d2c9f880e ]
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
commit 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
[ Apply only documentation changes as commit which causes boot
crash when boot CPU is nohz_full is not backported to stable
kernels - Krishanth ]
Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin(a)redhat.com>
Signed-off-by: Oleg Nesterov <oleg(a)redhat.com>
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Signed-off-by: Ingo Molnar <mingo(a)kernel.org>
Reviewed-by: Phil Auld <pauld(a)redhat.com>
Acked-by: Frederic Weisbecker <frederic(a)kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Cc: stable(a)vger.kernel.org # 5.4+
Signed-off-by: Krishanth Jagaduri <Krishanth.Jagaduri(a)sony.com>
---
Hi,
Before kernel 6.9, Documentation/timers/no_hz.rst states that
"nohz_full=" mask must not include the boot CPU, which is no longer
true after commit 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be
nohz_full").
When trying LTS kernels between 5.4 and 6.6, we noticed we could use
boot CPU as nohz_full but the information in the document was misleading.
This was fixed upstream by commit 5097cbcb38e6 ("sched/isolation: Prevent
boot crash when the boot CPU is nohz_full").
While it fixes the document description, it also fixes issue introduced
by another commit aae17ebb53cd ("workqueue: Avoid using isolated cpus'
timers on queue_delayed_work").
It is unlikely that upstream commit as a whole will be backported to
stable kernels which does not contain the commit that introduced the
issue of boot crash when boot CPU is nohz_full.
Could we fix only the document portion in stable kernels 5.4+ that
mentions boot CPU cannot be nohz_full?
---
Changes in v2:
- Add original changelog and trailers to commit message.
- Add backport note for why only document portion is modified.
- Link to v1: https://lore.kernel.org/r/20250205-send-oss-20250129-v1-1-d404921e6d7e@sony…
---
Documentation/timers/no_hz.rst | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/Documentation/timers/no_hz.rst b/Documentation/timers/no_hz.rst
index 065db217cb04fc252bbf6a05991296e7f1d3a4c5..16bda468423e88090c0dc467ca7a5c7f3fd2bf02 100644
--- a/Documentation/timers/no_hz.rst
+++ b/Documentation/timers/no_hz.rst
@@ -129,11 +129,8 @@ adaptive-tick CPUs: At least one non-adaptive-tick CPU must remain
online to handle timekeeping tasks in order to ensure that system
calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
(This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
-user processes to observe slight drifts in clock rate.) Therefore, the
-boot CPU is prohibited from entering adaptive-ticks mode. Specifying a
-"nohz_full=" mask that includes the boot CPU will result in a boot-time
-error message, and the boot CPU will be removed from the mask. Note that
-this means that your system must have at least two CPUs in order for
+user processes to observe slight drifts in clock rate.) Note that this
+means that your system must have at least two CPUs in order for
CONFIG_NO_HZ_FULL=y to do anything for you.
Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
---
base-commit: 219d54332a09e8d8741c1e1982f5eae56099de85
change-id: 20250129-send-oss-20250129-3c42dcf463eb
Best regards,
--
Krishanth Jagaduri <Krishanth.Jagaduri(a)sony.com>
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 221cd51efe4565501a3dbf04cc011b537dcce7fb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021035-alarm-cautious-b382@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 221cd51efe4565501a3dbf04cc011b537dcce7fb Mon Sep 17 00:00:00 2001
From: Ricardo Ribalda <ribalda(a)chromium.org>
Date: Tue, 3 Dec 2024 21:20:10 +0000
Subject: [PATCH] media: uvcvideo: Remove dangling pointers
When an async control is written, we copy a pointer to the file handle
that started the operation. That pointer will be used when the device is
done. Which could be anytime in the future.
If the user closes that file descriptor, its structure will be freed,
and there will be one dangling pointer per pending async control, that
the driver will try to use.
Clean all the dangling pointers during release().
To avoid adding a performance penalty in the most common case (no async
operation), a counter has been introduced with some logic to make sure
that it is properly handled.
Cc: stable(a)vger.kernel.org
Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Hans de Goede <hdegoede(a)redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda(a)chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-3-26c867231118@chromium…
Signed-off-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org>
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index b05b84887e51..4837d8df9c03 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -1579,6 +1579,40 @@ static void uvc_ctrl_send_slave_event(struct uvc_video_chain *chain,
uvc_ctrl_send_event(chain, handle, ctrl, mapping, val, changes);
}
+static void uvc_ctrl_set_handle(struct uvc_fh *handle, struct uvc_control *ctrl,
+ struct uvc_fh *new_handle)
+{
+ lockdep_assert_held(&handle->chain->ctrl_mutex);
+
+ if (new_handle) {
+ if (ctrl->handle)
+ dev_warn_ratelimited(&handle->stream->dev->udev->dev,
+ "UVC non compliance: Setting an async control with a pending operation.");
+
+ if (new_handle == ctrl->handle)
+ return;
+
+ if (ctrl->handle) {
+ WARN_ON(!ctrl->handle->pending_async_ctrls);
+ if (ctrl->handle->pending_async_ctrls)
+ ctrl->handle->pending_async_ctrls--;
+ }
+
+ ctrl->handle = new_handle;
+ handle->pending_async_ctrls++;
+ return;
+ }
+
+ /* Cannot clear the handle for a control not owned by us.*/
+ if (WARN_ON(ctrl->handle != handle))
+ return;
+
+ ctrl->handle = NULL;
+ if (WARN_ON(!handle->pending_async_ctrls))
+ return;
+ handle->pending_async_ctrls--;
+}
+
void uvc_ctrl_status_event(struct uvc_video_chain *chain,
struct uvc_control *ctrl, const u8 *data)
{
@@ -1589,7 +1623,8 @@ void uvc_ctrl_status_event(struct uvc_video_chain *chain,
mutex_lock(&chain->ctrl_mutex);
handle = ctrl->handle;
- ctrl->handle = NULL;
+ if (handle)
+ uvc_ctrl_set_handle(handle, ctrl, NULL);
list_for_each_entry(mapping, &ctrl->info.mappings, list) {
s32 value = __uvc_ctrl_get_value(mapping, data);
@@ -1863,7 +1898,7 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev,
if (!rollback && handle &&
ctrl->info.flags & UVC_CTRL_FLAG_ASYNCHRONOUS)
- ctrl->handle = handle;
+ uvc_ctrl_set_handle(handle, ctrl, handle);
}
return 0;
@@ -2772,6 +2807,26 @@ int uvc_ctrl_init_device(struct uvc_device *dev)
return 0;
}
+void uvc_ctrl_cleanup_fh(struct uvc_fh *handle)
+{
+ struct uvc_entity *entity;
+
+ guard(mutex)(&handle->chain->ctrl_mutex);
+
+ if (!handle->pending_async_ctrls)
+ return;
+
+ list_for_each_entry(entity, &handle->chain->dev->entities, list) {
+ for (unsigned int i = 0; i < entity->ncontrols; ++i) {
+ if (entity->controls[i].handle != handle)
+ continue;
+ uvc_ctrl_set_handle(handle, &entity->controls[i], NULL);
+ }
+ }
+
+ WARN_ON(handle->pending_async_ctrls);
+}
+
/*
* Cleanup device controls.
*/
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index dee6feeba274..93c6cdb23881 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -671,6 +671,8 @@ static int uvc_v4l2_release(struct file *file)
uvc_dbg(stream->dev, CALLS, "%s\n", __func__);
+ uvc_ctrl_cleanup_fh(handle);
+
/* Only free resources if this is a privileged handle. */
if (uvc_has_privileges(handle))
uvc_queue_release(&stream->queue);
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index 965a789ed03e..5690cfd61e23 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -338,7 +338,11 @@ struct uvc_video_chain {
struct uvc_entity *processing; /* Processing unit */
struct uvc_entity *selector; /* Selector unit */
- struct mutex ctrl_mutex; /* Protects ctrl.info */
+ struct mutex ctrl_mutex; /*
+ * Protects ctrl.info,
+ * ctrl.handle and
+ * uvc_fh.pending_async_ctrls
+ */
struct v4l2_prio_state prio; /* V4L2 priority state */
u32 caps; /* V4L2 chain-wide caps */
@@ -613,6 +617,7 @@ struct uvc_fh {
struct uvc_video_chain *chain;
struct uvc_streaming *stream;
enum uvc_handle_state state;
+ unsigned int pending_async_ctrls;
};
struct uvc_driver {
@@ -798,6 +803,8 @@ int uvc_ctrl_is_accessible(struct uvc_video_chain *chain, u32 v4l2_id,
int uvc_xu_ctrl_query(struct uvc_video_chain *chain,
struct uvc_xu_control_query *xqry);
+void uvc_ctrl_cleanup_fh(struct uvc_fh *handle);
+
/* Utility functions */
struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts,
u8 epaddr);
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x d9fecd096f67a4469536e040a8a10bbfb665918b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021006-sharpie-patchwork-f168@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d9fecd096f67a4469536e040a8a10bbfb665918b Mon Sep 17 00:00:00 2001
From: Ricardo Ribalda <ribalda(a)chromium.org>
Date: Tue, 3 Dec 2024 21:20:08 +0000
Subject: [PATCH] media: uvcvideo: Only save async fh if success
Now we keep a reference to the active fh for any call to uvc_ctrl_set,
regardless if it is an actual set or if it is a just a try or if the
device refused the operation.
We should only keep the file handle if the device actually accepted
applying the operation.
Cc: stable(a)vger.kernel.org
Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Suggested-by: Hans de Goede <hdegoede(a)redhat.com>
Reviewed-by: Hans de Goede <hdegoede(a)redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda(a)chromium.org>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-1-26c867231118@chromium…
Signed-off-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org>
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index bab9fdac98e6..e0806641a8d0 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -1811,7 +1811,10 @@ int uvc_ctrl_begin(struct uvc_video_chain *chain)
}
static int uvc_ctrl_commit_entity(struct uvc_device *dev,
- struct uvc_entity *entity, int rollback, struct uvc_control **err_ctrl)
+ struct uvc_fh *handle,
+ struct uvc_entity *entity,
+ int rollback,
+ struct uvc_control **err_ctrl)
{
struct uvc_control *ctrl;
unsigned int i;
@@ -1859,6 +1862,10 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev,
*err_ctrl = ctrl;
return ret;
}
+
+ if (!rollback && handle &&
+ ctrl->info.flags & UVC_CTRL_FLAG_ASYNCHRONOUS)
+ ctrl->handle = handle;
}
return 0;
@@ -1895,8 +1902,8 @@ int __uvc_ctrl_commit(struct uvc_fh *handle, int rollback,
/* Find the control. */
list_for_each_entry(entity, &chain->entities, chain) {
- ret = uvc_ctrl_commit_entity(chain->dev, entity, rollback,
- &err_ctrl);
+ ret = uvc_ctrl_commit_entity(chain->dev, handle, entity,
+ rollback, &err_ctrl);
if (ret < 0) {
if (ctrls)
ctrls->error_idx =
@@ -2046,9 +2053,6 @@ int uvc_ctrl_set(struct uvc_fh *handle,
mapping->set(mapping, value,
uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT));
- if (ctrl->info.flags & UVC_CTRL_FLAG_ASYNCHRONOUS)
- ctrl->handle = handle;
-
ctrl->dirty = 1;
ctrl->modified = 1;
return 0;
@@ -2377,7 +2381,7 @@ int uvc_ctrl_restore_values(struct uvc_device *dev)
ctrl->dirty = 1;
}
- ret = uvc_ctrl_commit_entity(dev, entity, 0, NULL);
+ ret = uvc_ctrl_commit_entity(dev, NULL, entity, 0, NULL);
if (ret < 0)
return ret;
}
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Cc: stable(a)vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng(a)uniontech.com>
Tested-by: Yuli Wang <wangyuli(a)uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn>
---
V2: Fix build for !HIBERNATION and restore to idle_play_dead() if fails.
arch/loongarch/kernel/smp.c | 47 ++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index fbf747447f13..4b24589c0b56 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -19,6 +19,7 @@
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/export.h>
+#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/time.h>
#include <linux/tracepoint.h>
@@ -423,7 +424,7 @@ void loongson_cpu_die(unsigned int cpu)
mb();
}
-void __noreturn arch_cpu_idle_dead(void)
+static void __noreturn idle_play_dead(void)
{
register uint64_t addr;
register void (*init_fn)(void);
@@ -447,6 +448,50 @@ void __noreturn arch_cpu_idle_dead(void)
BUG();
}
+#ifdef CONFIG_HIBERNATION
+static void __noreturn poll_play_dead(void)
+{
+ register uint64_t addr;
+ register void (*init_fn)(void);
+
+ idle_task_exit();
+ __this_cpu_write(cpu_state, CPU_DEAD);
+
+ __smp_mb();
+ do {
+ __asm__ __volatile__("nop\n\t");
+ addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
+ } while (addr == 0);
+
+ init_fn = (void *)TO_CACHE(addr);
+ iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
+
+ init_fn();
+ BUG();
+}
+#endif
+
+static void (*play_dead)(void) = idle_play_dead;
+
+void __noreturn arch_cpu_idle_dead(void)
+{
+ play_dead();
+ BUG(); /* play_dead() doesn't return */
+}
+
+#ifdef CONFIG_HIBERNATION
+int hibernate_resume_nonboot_cpu_disable(void)
+{
+ int ret;
+
+ play_dead = poll_play_dead;
+ ret = suspend_disable_secondary_cpus();
+ play_dead = idle_play_dead;
+
+ return ret;
+}
+#endif
+
#endif
/*
--
2.47.1
A private syzbot instance reported "KASAN: slab-use-after-free Read in
dev_map_enqueue" under some runtime environments.
Upstream patch fecef4cd42c6 ("tun: Assign missing bpf_net_context")
fixes the issue. In order to bring this patch to stable v6.6 it's also
necessary to bring upstream patch 401cb7dae813 ("net: Reference
bpf_redirect_info via task_struct on PREEMPT_RT.") as a dependency.
The dependency patch (401cb7dae813 ("net: Reference bpf_redirect_info
via task_struct on PREEMPT_RT.")) comes from a patch series [1], the
second patch addresses a missing change in the series. Only these two
patches were picked up because the purpose of this backport is to fix
the particular issue discovered by syzbot. However, maybe Sebastian may
consider it's a better idea to backport the whole series instead of only
these two patches. I'd also appreciate if you can share your opinion on
whether this backport should be applied to other stable branches as
well.
Both patches needed some manual work in order to be applied on stable,
mostly related to changes in the context lines:
In the case of 401cb7dae813 ("net: Reference bpf_redirect_info via
task_struct on PREEMPT_RT."), the backport addresses the differences in
net/core/dev.c:napi_threaded_poll(), busy_poll_stop(), napi_busy_loop()
and net_rx_action() between upstream and stable. This
allows the patch to be applied without bringing additional dependencies,
such as dad6b9770263 ("net: Allow to use SMP threads for backlog
NAPI."). The rest of the changes are made to adapt context lines and are
unrelated to the purpose of the patch.
For fecef4cd42c6 ("tun: Assign missing bpf_net_context"), the backport
addresses the changes in function parameters introduced by
7cd1107f48e2a ("bpf, xdp: constify some bpf_prog * function arguments")
and 4d2bb0bfe874 ("xdp: rely on skb pointer reference in do_xdp_generic
and netif_receive_generic_xdp").
Additionally, upstream commit 9da49aa80d68 ("tun: Add missing
bpf_net_ctx_clear() in do_xdp_generic()"), which fixes
fecef4cd42c6 ("tun: Assign missing bpf_net_context") is also backported
with trivial changes to adapt the differences in the patch context.
[1] https://lore.kernel.org/all/20240612170303.3896084-1-bigeasy@linutronix.de/
Signed-off-by: Ricardo Cañuelo Navarro <rcn(a)igalia.com>
---
Changes in v3:
- Additional patch backported:
9da49aa80d68 ("tun: Add missing bpf_net_ctx_clear() in do_xdp_generic()")
which fixes fecef4cd42c6 ("tun: Assign missing bpf_net_context.").
Suggested by Sasha's helper bot.
- Link to v2: https://lore.kernel.org/r/20250225-20250204-kasan-slab-use-after-free-read-…
Changes in v2:
- Fix backport for patch 401cb7dae813 ("net: Reference bpf_redirect_info
via task_struct on PREEMPT_RT.") in v1.
- Add context for the patches and SoB tags.
- Extend the recipient list.
- Link to v1: https://lore.kernel.org/r/20250224-20250204-kasan-slab-use-after-free-read-…
---
Jeongjun Park (1):
tun: Add missing bpf_net_ctx_clear() in do_xdp_generic()
Sebastian Andrzej Siewior (2):
net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.
tun: Assign missing bpf_net_context.
drivers/net/tun.c | 7 +++++++
include/linux/filter.h | 56 +++++++++++++++++++++++++++++++++++++++++---------
include/linux/sched.h | 3 +++
kernel/bpf/cpumap.c | 3 +++
kernel/bpf/devmap.c | 9 +++++++-
kernel/fork.c | 1 +
net/bpf/test_run.c | 11 +++++++++-
net/core/dev.c | 34 +++++++++++++++++++++++++++++-
net/core/filter.c | 44 +++++++++++----------------------------
net/core/lwt_bpf.c | 3 +++
10 files changed, 126 insertions(+), 45 deletions(-)
---
base-commit: c0249d3a0c3cf082d56f4285647ddba19ef604a7
change-id: 20250224-20250204-kasan-slab-use-after-free-read-in-dev_map_enqueue__submit-b907af839805
Cheers,
Ricardo
This fixes a regression introduced a few weeks ago in stable kernels
6.12.14 and 6.13.3. The internal microphone on ASUS Vivobook N705UD /
X705UD laptops is broken: the microphone appears in userspace (e.g.
Gnome settings) but no sound is detected.
I bisected it to commit 3b4309546b48 ("ALSA: hda: Fix headset detection
failure due to unstable sort").
I figured out the cause:
1. The initial pins enabled for the ALC256 driver are:
cfg->inputs == {
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
2. Since 2017 and commits c1732ede5e8 ("ALSA: hda/realtek - Fix headset
and mic on several ASUS laptops with ALC256") and 28e8af8a163 ("ALSA:
hda/realtek: Fix mic and headset jack sense on ASUS X705UD"), the
quirk ALC256_FIXUP_ASUS_MIC is also applied to ASUS X705UD / N705UD
laptops.
This added another internal microphone on pin 0x13:
cfg->inputs == {
{ pin=0x13, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
I don't know what this pin 0x13 corresponds to. To the best of my
knowledge, these laptops have only one internal microphone.
3. Before 2025 and commit 3b4309546b48 ("ALSA: hda: Fix headset
detection failure due to unstable sort"), the sort function would let
the microphone of pin 0x1a (the working one) *before* the microphone
of pin 0x13 (the phantom one).
4. After this commit 3b4309546b48, the fixed sort function puts the
working microphone (pin 0x1a) *after* the phantom one (pin 0x13). As
a result, no sound is detected anymore.
It looks like the quirk ALC256_FIXUP_ASUS_MIC is not needed anymore for
ASUS Vivobook X705UD / N705UD laptops. Without it, everything works
fine:
- the internal microphone is detected and records actual sound,
- plugging in a jack headset is detected and can record actual sound
with it,
- unplugging the jack headset makes the system go back to internal
microphone and can record actual sound.
Cc: stable(a)vger.kernel.org
Cc: Kuan-Wei Chiu <visitorckw(a)gmail.com>
Cc: Chris Chiu <chris.chiu(a)canonical.com>
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Tested-by: Adrien Vergé <adrienverge(a)gmail.com>
Signed-off-by: Adrien Vergé <adrienverge(a)gmail.com>
---
sound/pci/hda/patch_realtek.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 224616fbec4f..456dfa2b4b4b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10656,7 +10656,6 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE),
SND_PCI_QUIRK(0x1043, 0x19e1, "ASUS UX581LV", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
- SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x1a63, "ASUS UX3405MA", ALC245_FIXUP_CS35L41_SPI_2),
SND_PCI_QUIRK(0x1043, 0x1a83, "ASUS UM5302LA", ALC294_FIXUP_CS35L41_I2C_2),
SND_PCI_QUIRK(0x1043, 0x1a8f, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2),
base-commit: d082ecbc71e9e0bf49883ee4afd435a77a5101b6
--
2.48.1
Please apply this series to these stable trees.
This series makes it possible to backport the fix for the BUG_ON
check failure on rename operations reported by syzbot.
The first two patches are for dependency resolution.
Patch 3/3 is the target patch, and it has been tailored to avoid
extensive page/folio conversion.
This patch set has been tested against the latest stable kernels
listed in the subject prefix.
Thanks,
Ryusuke Konishi
Ryusuke Konishi (3):
nilfs2: move page release outside of nilfs_delete_entry and
nilfs_set_link
nilfs2: eliminate staggered calls to kunmap in nilfs_rename
nilfs2: handle errors that nilfs_prepare_chunk() may return
fs/nilfs2/dir.c | 24 +++++++++++-------------
fs/nilfs2/namei.c | 37 ++++++++++++++++++++-----------------
fs/nilfs2/nilfs.h | 10 ++++++++--
3 files changed, 39 insertions(+), 32 deletions(-)
--
2.43.5
From: Phillip Lougher <phillip(a)squashfs.org.uk>
[ upstream commit 9253c54e01b6505d348afbc02abaa4d9f8a01395 ]
Syskiller has produced an out of bounds access in fill_meta_index().
That out of bounds access is ultimately caused because the inode
has an inode number with the invalid value of zero, which was not checked.
The reason this causes the out of bounds access is due to following
sequence of events:
1. Fill_meta_index() is called to allocate (via empty_meta_index())
and fill a metadata index. It however suffers a data read error
and aborts, invalidating the newly returned empty metadata index.
It does this by setting the inode number of the index to zero,
which means unused (zero is not a valid inode number).
2. When fill_meta_index() is subsequently called again on another
read operation, locate_meta_index() returns the previous index
because it matches the inode number of 0. Because this index
has been returned it is expected to have been filled, and because
it hasn't been, an out of bounds access is performed.
This patch adds a sanity check which checks that the inode number
is not zero when the inode is created and returns -EINVAL if it is.
[phillip(a)squashfs.org.uk: whitespace fix]
Link: https://lkml.kernel.org/r/20240409204723.446925-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20240408220206.435788-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip(a)squashfs.org.uk>
Reported-by: "Ubisectech Sirius" <bugreport(a)ubisectech.com>
Closes: https://lore.kernel.org/lkml/87f5c007-b8a5-41ae-8b57-431e924c5915.bugreport…
Cc: Christian Brauner <brauner(a)kernel.org>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
Signed-off-by: Xiangyu Chen <xiangyu.chen(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified on qemux86-64.
The test code from https://lore.kernel.org/lkml/87f5c007-b8a5-41ae-8b57-431e924c5915.bugreport…
Test code would trigger a kernel crash (crash point at read_blocklist) and the crash won't happen anymore after
applying this commit.
---
fs/squashfs/inode.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index f31649080a88..95a9ff9e2399 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -48,6 +48,10 @@ static int squashfs_new_inode(struct super_block *sb, struct inode *inode,
gid_t i_gid;
int err;
+ inode->i_ino = le32_to_cpu(sqsh_ino->inode_number);
+ if (inode->i_ino == 0)
+ return -EINVAL;
+
err = squashfs_get_id(sb, le16_to_cpu(sqsh_ino->uid), &i_uid);
if (err)
return err;
@@ -58,7 +62,6 @@ static int squashfs_new_inode(struct super_block *sb, struct inode *inode,
i_uid_write(inode, i_uid);
i_gid_write(inode, i_gid);
- inode->i_ino = le32_to_cpu(sqsh_ino->inode_number);
inode->i_mtime.tv_sec = le32_to_cpu(sqsh_ino->mtime);
inode->i_atime.tv_sec = inode->i_mtime.tv_sec;
inode->i_ctime.tv_sec = inode->i_mtime.tv_sec;
--
2.25.1
The patch titled
Subject: rapidio: add check for rio_add_net() in rio_scan_alloc_net()
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
rapidio-add-check-for-rio_add_net-in-rio_scan_alloc_net.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche…
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Haoxiang Li <haoxiang_li2024(a)163.com>
Subject: rapidio: add check for rio_add_net() in rio_scan_alloc_net()
Date: Thu, 27 Feb 2025 12:11:31 +0800
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com>
Cc: Alexandre Bounine <alex.bou9(a)gmail.com>
Cc: Matt Porter <mporter(a)kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter(a)linaro.org>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
drivers/rapidio/rio-scan.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/rapidio/rio-scan.c~rapidio-add-check-for-rio_add_net-in-rio_scan_alloc_net
+++ a/drivers/rapidio/rio-scan.c
@@ -871,7 +871,10 @@ static struct rio_net *rio_scan_alloc_ne
dev_set_name(&net->dev, "rnet_%d", net->id);
net->dev.parent = &mport->dev;
net->dev.release = rio_scan_release_dev;
- rio_add_net(net);
+ if (rio_add_net(net)) {
+ put_device(&net->dev);
+ net = NULL;
+ }
}
return net;
_
Patches currently in -mm which might be from haoxiang_li2024(a)163.com are
m68k-sun3-add-check-for-__pgd_alloc.patch
rapidio-fix-an-api-misues-when-rio_add_net-fails.patch
rapidio-add-check-for-rio_add_net-in-rio_scan_alloc_net.patch
On Wed, Feb 26, 2025 at 02:43:31PM +0100, Andrew Lunn wrote:
> On Tue, Feb 18, 2025 at 12:19:57PM +0000, Qasim Ijaz wrote:
> > On Tue, Feb 18, 2025 at 02:10:08AM +0100, Andrew Lunn wrote:
> > > On Tue, Feb 18, 2025 at 12:24:43AM +0000, Qasim Ijaz wrote:
> > > > In mii_nway_restart() during the line:
> > > >
> > > > bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
> > > >
> > > > The code attempts to call mii->mdio_read which is ch9200_mdio_read().
> > > >
> > > > ch9200_mdio_read() utilises a local buffer, which is initialised
> > > > with control_read():
> > > >
> > > > unsigned char buff[2];
> > > >
> > > > However buff is conditionally initialised inside control_read():
> > > >
> > > > if (err == size) {
> > > > memcpy(data, buf, size);
> > > > }
> > > >
> > > > If the condition of "err == size" is not met, then buff remains
> > > > uninitialised. Once this happens the uninitialised buff is accessed
> > > > and returned during ch9200_mdio_read():
> > > >
> > > > return (buff[0] | buff[1] << 8);
> > > >
> > > > The problem stems from the fact that ch9200_mdio_read() ignores the
> > > > return value of control_read(), leading to uinit-access of buff.
> > > >
> > > > To fix this we should check the return value of control_read()
> > > > and return early on error.
> > >
> > > What about get_mac_address()?
> > >
> > > If you find a bug, it is a good idea to look around and see if there
> > > are any more instances of the same bug. I could be wrong, but it seems
> > > like get_mac_address() suffers from the same problem?
> >
> > Thank you for the feedback Andrew. I checked get_mac_address() before
> > sending this patch and to me it looks like it does check the return value of
> > control_read(). It accumulates the return value of each control_read() call into
> > rd_mac_len and then checks if it not equal to what is expected (ETH_ALEN which is 6),
> > I believe each call should return 2.
>
> It is unlikely a real device could trigger an issue, but a USB Rubber
> Ducky might be able to. So the question is, are you interested in
> protecting against malicious devices, or just making a static analyser
> happy? Feel free to submit the patch as is.
>
Hi Andrew,
How about an approach similar to the patch for ch9200_mdio_read(), where we immediately check the return value of
each control_read() call in get_mac_address(), and if one fails we stop and return an error right away?
That would ensure we don’t continue if an earlier call fails.
Let me know if you’d like me to submit a patch v2 if this sounds good.
Thanks,
Qasim
> Andrew
>
The patch titled
Subject: rapidio: fix an API misues when rio_add_net() fails
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
rapidio-fix-an-api-misues-when-rio_add_net-fails.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche…
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Haoxiang Li <haoxiang_li2024(a)163.com>
Subject: rapidio: fix an API misues when rio_add_net() fails
Date: Thu, 27 Feb 2025 15:34:09 +0800
rio_add_net() calls device_register() and fails when device_register()
fails. Thus, put_device() should be used rather than kfree(). Add
"mport->net = NULL;" to avoid a use after free issue.
Link: https://lkml.kernel.org/r/20250227073409.3696854-1-haoxiang_li2024@163.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com>
Reviewed-by: Dan Carpenter <dan.carpenter(a)linaro.org>
Cc: Alexandre Bounine <alex.bou9(a)gmail.com>
Cc: Matt Porter <mporter(a)kernel.crashing.org>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
drivers/rapidio/devices/rio_mport_cdev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/rapidio/devices/rio_mport_cdev.c~rapidio-fix-an-api-misues-when-rio_add_net-fails
+++ a/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1742,7 +1742,8 @@ static int rio_mport_add_riodev(struct m
err = rio_add_net(net);
if (err) {
rmcd_debug(RDEV, "failed to register net, err=%d", err);
- kfree(net);
+ put_device(&net->dev);
+ mport->net = NULL;
goto cleanup;
}
}
_
Patches currently in -mm which might be from haoxiang_li2024(a)163.com are
m68k-sun3-add-check-for-__pgd_alloc.patch
rapidio-fix-an-api-misues-when-rio_add_net-fails.patch
I discovered a bug that appears in any 6.13 kernel within quemu
but not in any 6.12 kernel.
I use quemu-9.2.2 to run windows10 in it and there I use a program
called sprint-layout-6.0.
This program saves and loads his files via samba,
so I have them on my linux-ext4 disk and not in the
disk-file quemu uses.
It worked for years now and it still works with all 6.12.x
kernels up to now.
But it does not work with any 6.13.x kernel up to date.
The bug shows up when I try to load a file from within this program,
then the emulated windows10 pops up a window with "exeption 8000004".
I do not know what this is trying to tell me, but under any 6.12.x
and older kernels this did not happen.
So I assume a bug in 6.13.x kernel is the cause.
I also reported this to qemu but got now answer up to now.
Any help is welcome, thanks.
--
Best regards
Klaus
I discovered a bug that appears in any 6.13 kernel within quemu
but not in any 6.12 kernel.
I use quemu-9.2.2 to run windows10 in it and there I use a program
called sprint-layout-6.0.
This program saves and loads his files via samba,
so I have them on my linux-ext4 disk and not in the
disk-file quemu uses.
It worked for years now and it still works with all 6.12.x
kernels up to now.
But it does not work with any 6.13.x kernel up to date.
The bug shows up when I try to load a file from within this program,
then the emulated windows10 pops up a window with "exeption 8000004".
I do not know what this is trying to tell me, but under any 6.12.x
and older kernels this did not happen.
So I assume a bug in 6.13.x kernel is the cause.
I also reported this to qemu but got now answer up to now.
Any help is welcome, thanks.
--
Best regards
Klaus
When device_register(&child->dev) failed, we should call put_device()
to explicitly release child->dev.
As comment of device_register() says, 'NOTE: _Never_ directly free
@dev after calling this function, even if it returned an error! Always
use put_device() to give up the reference initialized in this function
instead.'
Found by code review.
Cc: stable(a)vger.kernel.org
Fixes: 4f535093cf8f ("PCI: Put pci_dev in device tree as early as possible")
Signed-off-by: Ma Ke <make24(a)iscas.ac.cn>
---
Changes in v3:
- modified the description as suggestions.
Changes in v2:
- added the bug description about the comment of device_add();
- fixed the patch as suggestions;
- added Cc and Fixes table.
---
drivers/pci/probe.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 2e81ab0f5a25..51b78fcda4eb 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1174,7 +1174,10 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
add_dev:
pci_set_bus_msi_domain(child);
ret = device_register(&child->dev);
- WARN_ON(ret < 0);
+ if (WARN_ON(ret < 0)) {
+ put_device(&child->dev);
+ return NULL;
+ }
pcibios_add_bus(child);
--
2.25.1
Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it could cause memory leak.
device_register() includes device_add(). As comment of device_add()
says, 'if device_add() succeeds, you should call device_del() when you
want to get rid of it. If device_add() has not succeeded, use only
put_device() to drop the reference count'.
Found by code review.
Cc: stable(a)vger.kernel.org
Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface")
Signed-off-by: Ma Ke <make24(a)iscas.ac.cn>
---
Changes in v2:
- modified the patch description.
---
drivers/pci/probe.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 246744d8d268..7b1d7ce3a83e 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1018,8 +1018,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
name = dev_name(&bus->dev);
err = device_register(&bus->dev);
- if (err)
+ if (err) {
+ put_device(&bus->dev);
goto unregister;
+ }
pcibios_add_bus(bus);
--
2.25.1
This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
This commit was found responsible for issues with SD card recognition,
as users had to re-insert their cards in the readers and wait for a
while. As for some people the SD card was involved in the boot process
it also caused boot failures.
Cc: stable(a)vger.kernel.org
Link: https://bbs.archlinux.org/viewtopic.php?id=303321
Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
Reported-by: qf <quintafeira(a)tutanota.com>
Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
Signed-off-by: Christian Heusel <christian(a)heusel.eu>
---
drivers/misc/cardreader/rtsx_usb.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c
index e0174da5e9fc39ae96b70ce70d57a87dfaa2ebdb..77b0490a1b38d79134d48020bd49a9fa6f0df967 100644
--- a/drivers/misc/cardreader/rtsx_usb.c
+++ b/drivers/misc/cardreader/rtsx_usb.c
@@ -286,7 +286,6 @@ static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status)
int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status)
{
int ret;
- u8 interrupt_val = 0;
u16 *buf;
if (!status)
@@ -309,20 +308,6 @@ int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status)
ret = rtsx_usb_get_status_with_bulk(ucr, status);
}
- rtsx_usb_read_register(ucr, CARD_INT_PEND, &interrupt_val);
- /* Cross check presence with interrupts */
- if (*status & XD_CD)
- if (!(interrupt_val & XD_INT))
- *status &= ~XD_CD;
-
- if (*status & SD_CD)
- if (!(interrupt_val & SD_INT))
- *status &= ~SD_CD;
-
- if (*status & MS_CD)
- if (!(interrupt_val & MS_INT))
- *status &= ~MS_CD;
-
/* usb_control_msg may return positive when success */
if (ret < 0)
return ret;
---
base-commit: d082ecbc71e9e0bf49883ee4afd435a77a5101b6
change-id: 20250224-revert-sdcard-patch-f7a7453d4d8a
Best regards,
--
Christian Heusel <christian(a)heusel.eu>
When find_nmk_gpio_from_pin fails to find a valid GPIO chip
for the given pin, the bit variable remains uninitialized. This
uninitialized value is then passed to __nmk_gpio_set_mode,
leading to undefined behavior and undesired address access.
To fix this, add error handling to check the return value of
find_nmk_gpio_from_pin. Log an error message indicating an
invalid pin offset and return -EINVAL immediately If the function
fails.
Fixes: 75d270fda64d ("gpio: nomadik: request dynamic ID allocation")
Cc: stable(a)vger.kernel.org # 6.9+
Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn>
---
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index f4f10c60c1d2..4155137b0674 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -985,7 +985,7 @@ static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
unsigned int pin)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
- struct nmk_gpio_chip *nmk_chip;
+ struct nmk_gpio_chip *nmk_chip, *r;
struct gpio_chip *chip;
unsigned int bit;
@@ -1002,7 +1002,12 @@ static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
dev_dbg(npct->dev, "enable pin %u as GPIO\n", pin);
- find_nmk_gpio_from_pin(pin, &bit);
+ r = find_nmk_gpio_from_pin(pin, &bit);
+ if (!r) {
+ dev_err(npct->dev,
+ "invalid pin offset %d\n", pin);
+ return -EINVAL;
+ }
clk_enable(nmk_chip->clk);
/* There is no glitch when converting any pin to GPIO */
--
2.42.0.windows.2