February 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] ASoC: renesas: rz-ssi: Terminate all the DMA transactions" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 541011dc2d7c4c82523706f726f422a5e23cc86f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021036-humorist-voltage-3645@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 541011dc2d7c4c82523706f726f422a5e23cc86f Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Tue, 10 Dec 2024 19:09:33 +0200 Subject: [PATCH] ASoC: renesas: rz-ssi: Terminate all the DMA transactions The stop trigger invokes rz_ssi_stop() and rz_ssi_stream_quit(). - The purpose of rz_ssi_stop() is to disable TX/RX, terminate DMA transactions, and set the controller to idle. - The purpose of rz_ssi_stream_quit() is to reset the substream-specific software data by setting strm->running and strm->substream appropriately. The function rz_ssi_is_stream_running() checks if both strm->substream and strm->running are valid and returns true if so. Its implementation is as follows: static inline bool rz_ssi_is_stream_running(struct rz_ssi_stream *strm) { return strm->substream && strm->running; } When the controller is configured in full-duplex mode (with both playback and capture active), the rz_ssi_stop() function does not modify the controller settings when called for the first substream in the full-duplex setup. Instead, it simply sets strm->running = 0 and returns if the companion substream is still running. The following code illustrates this: static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm) { strm->running = 0; if (rz_ssi_is_stream_running(&ssi->playback) || rz_ssi_is_stream_running(&ssi->capture)) return 0; // ... } The controller settings, along with the DMA termination (for the last stopped substream), are only applied when the last substream in the full-duplex setup is stopped. While applying the controller settings only when the last substream stops is not problematic, terminating the DMA operations for only one substream causes failures when starting and stopping full-duplex operations multiple times in a loop. To address this issue, call dmaengine_terminate_async() for both substreams involved in the full-duplex setup when the last substream in the setup is stopped. Fixes: 4f8cd05a4305 ("ASoC: sh: rz-ssi: Add full duplex support") Cc: stable(a)vger.kernel.org Reviewed-by: Biju Das <biju.das.jz(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Link: https://patch.msgid.link/20241210170953.2936724-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/sound/soc/renesas/rz-ssi.c b/sound/soc/renesas/rz-ssi.c index 6efd017aaa7f..2d8721156099 100644 --- a/sound/soc/renesas/rz-ssi.c +++ b/sound/soc/renesas/rz-ssi.c @@ -415,8 +415,12 @@ static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm) rz_ssi_reg_mask_setl(ssi, SSICR, SSICR_TEN | SSICR_REN, 0); /* Cancel all remaining DMA transactions */ - if (rz_ssi_is_dma_enabled(ssi)) - dmaengine_terminate_async(strm->dma_ch); + if (rz_ssi_is_dma_enabled(ssi)) { + if (ssi->playback.dma_ch) + dmaengine_terminate_async(ssi->playback.dma_ch); + if (ssi->capture.dma_ch) + dmaengine_terminate_async(ssi->capture.dma_ch); + } rz_ssi_set_idle(ssi);

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] wifi: mt76: mt7915: add module param to select 5 GHz or 6 GHz" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 57af267d2b8f5d88485c6372761386d79c5e6a1a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021037-retype-jaunt-6b0b@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 57af267d2b8f5d88485c6372761386d79c5e6a1a Mon Sep 17 00:00:00 2001 From: Shayne Chen <shayne.chen(a)mediatek.com> Date: Thu, 10 Oct 2024 10:38:16 +0200 Subject: [PATCH] wifi: mt76: mt7915: add module param to select 5 GHz or 6 GHz on MT7916 Due to a limitation in available memory, the MT7916 firmware can only handle either 5 GHz or 6 GHz at a time. It does not support runtime switching without a full restart. On older firmware, this accidentally worked to some degree due to missing checks, but couldn't be supported properly, because it left the 6 GHz channels uncalibrated. Newer firmware refuses to start on either band if the passed EEPROM data indicates support for both. Deal with this limitation by using a module parameter to specify the preferred band in case both are supported. Fixes: b4d093e321bd ("mt76: mt7915: add 6 GHz support") Cc: stable(a)vger.kernel.org Signed-off-by: Shayne Chen <shayne.chen(a)mediatek.com> Link: https://patch.msgid.link/20241010083816.51880-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd(a)nbd.name> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c index bfdbc15abaa9..928e0b07a9bf 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c @@ -2,9 +2,14 @@ /* Copyright (C) 2020 MediaTek Inc. */ #include <linux/firmware.h> +#include <linux/moduleparam.h> #include "mt7915.h" #include "eeprom.h" +static bool enable_6ghz; +module_param(enable_6ghz, bool, 0644); +MODULE_PARM_DESC(enable_6ghz, "Enable 6 GHz instead of 5 GHz on hardware that supports both"); + static int mt7915_eeprom_load_precal(struct mt7915_dev *dev) { struct mt76_dev *mdev = &dev->mt76; @@ -170,8 +175,20 @@ static void mt7915_eeprom_parse_band_config(struct mt7915_phy *phy) phy->mt76->cap.has_6ghz = true; return; case MT_EE_V2_BAND_SEL_5GHZ_6GHZ: - phy->mt76->cap.has_5ghz = true; - phy->mt76->cap.has_6ghz = true; + if (enable_6ghz) { + phy->mt76->cap.has_6ghz = true; + u8p_replace_bits(&eeprom[MT_EE_WIFI_CONF + band], + MT_EE_V2_BAND_SEL_6GHZ, + MT_EE_WIFI_CONF0_BAND_SEL); + } else { + phy->mt76->cap.has_5ghz = true; + u8p_replace_bits(&eeprom[MT_EE_WIFI_CONF + band], + MT_EE_V2_BAND_SEL_5GHZ, + MT_EE_WIFI_CONF0_BAND_SEL); + } + /* force to buffer mode */ + dev->flash_mode = true; + return; default: phy->mt76->cap.has_2ghz = true; diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c index 6bef96e3d2a3..f82216d1bda0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c @@ -1239,14 +1239,14 @@ int mt7915_register_device(struct mt7915_dev *dev) if (ret) goto unreg_dev; - ieee80211_queue_work(mt76_hw(dev), &dev->init_work); - if (phy2) { ret = mt7915_register_ext_phy(dev, phy2); if (ret) goto unreg_thermal; } + ieee80211_queue_work(mt76_hw(dev), &dev->init_work); + dev->recovery.hw_init_done = true; ret = mt7915_init_debugfs(&dev->phy);

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] Input: bbnsm_pwrkey - add remove hook" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 55b75306c3edf369285ce22ba1ced45e335094c2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021047-wiry-tweed-c09f@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55b75306c3edf369285ce22ba1ced45e335094c2 Mon Sep 17 00:00:00 2001 From: Peng Fan <peng.fan(a)nxp.com> Date: Thu, 12 Dec 2024 11:03:22 +0800 Subject: [PATCH] Input: bbnsm_pwrkey - add remove hook Without remove hook to clear wake irq, there will be kernel dump when doing module test. "bbnsm_pwrkey 44440000.bbnsm:pwrkey: wake irq already initialized" Add remove hook to clear wake irq and set wakeup to false. Signed-off-by: Peng Fan <peng.fan(a)nxp.com> Fixes: 40e40fdfec3f ("Input: bbnsm_pwrkey - add bbnsm power key support") Link: https://lore.kernel.org/r/20241212030322.3110017-1-peng.fan@oss.nxp.com Cc: stable(a)vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> diff --git a/drivers/input/misc/nxp-bbnsm-pwrkey.c b/drivers/input/misc/nxp-bbnsm-pwrkey.c index eb4173f9c820..7ba8d166d68c 100644 --- a/drivers/input/misc/nxp-bbnsm-pwrkey.c +++ b/drivers/input/misc/nxp-bbnsm-pwrkey.c @@ -187,6 +187,12 @@ static int bbnsm_pwrkey_probe(struct platform_device *pdev) return 0; } +static void bbnsm_pwrkey_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); +} + static int __maybe_unused bbnsm_pwrkey_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -223,6 +229,8 @@ static struct platform_driver bbnsm_pwrkey_driver = { .of_match_table = bbnsm_pwrkey_ids, }, .probe = bbnsm_pwrkey_probe, + .remove = bbnsm_pwrkey_remove, + }; module_platform_driver(bbnsm_pwrkey_driver);

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] Input: synaptics - fix crash when enabling pass-through port" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 08bd5b7c9a2401faabdaa1472d45c7de0755fd7e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021059-splice-blush-823b@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 08bd5b7c9a2401faabdaa1472d45c7de0755fd7e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Date: Fri, 17 Jan 2025 09:23:40 -0800 Subject: [PATCH] Input: synaptics - fix crash when enabling pass-through port When enabling a pass-through port an interrupt might come before psmouse driver binds to the pass-through port. However synaptics sub-driver tries to access psmouse instance presumably associated with the pass-through port to figure out if only 1 byte of response or entire protocol packet needs to be forwarded to the pass-through port and may crash if psmouse instance has not been attached to the port yet. Fix the crash by introducing open() and close() methods for the port and check if the port is open before trying to access psmouse instance. Because psmouse calls serio_open() only after attaching psmouse instance to serio port instance this prevents the potential crash. Reported-by: Takashi Iwai <tiwai(a)suse.de> Fixes: 100e16959c3c ("Input: libps2 - attach ps2dev instances as serio port's drvdata") Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522 Cc: stable(a)vger.kernel.org Reviewed-by: Takashi Iwai <tiwai(a)suse.de> Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 2735f86c23cc..aba57abe6978 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -665,23 +665,50 @@ static void synaptics_pt_stop(struct serio *serio) priv->pt_port = NULL; } +static int synaptics_pt_open(struct serio *serio) +{ + struct psmouse *parent = psmouse_from_serio(serio->parent); + struct synaptics_data *priv = parent->private; + + guard(serio_pause_rx)(parent->ps2dev.serio); + priv->pt_port_open = true; + + return 0; +} + +static void synaptics_pt_close(struct serio *serio) +{ + struct psmouse *parent = psmouse_from_serio(serio->parent); + struct synaptics_data *priv = parent->private; + + guard(serio_pause_rx)(parent->ps2dev.serio); + priv->pt_port_open = false; +} + static int synaptics_is_pt_packet(u8 *buf) { return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4; } -static void synaptics_pass_pt_packet(struct serio *ptport, u8 *packet) +static void synaptics_pass_pt_packet(struct synaptics_data *priv, u8 *packet) { - struct psmouse *child = psmouse_from_serio(ptport); + struct serio *ptport; - if (child && child->state == PSMOUSE_ACTIVATED) { - serio_interrupt(ptport, packet[1], 0); - serio_interrupt(ptport, packet[4], 0); - serio_interrupt(ptport, packet[5], 0); - if (child->pktsize == 4) - serio_interrupt(ptport, packet[2], 0); - } else { - serio_interrupt(ptport, packet[1], 0); + ptport = priv->pt_port; + if (!ptport) + return; + + serio_interrupt(ptport, packet[1], 0); + + if (priv->pt_port_open) { + struct psmouse *child = psmouse_from_serio(ptport); + + if (child->state == PSMOUSE_ACTIVATED) { + serio_interrupt(ptport, packet[4], 0); + serio_interrupt(ptport, packet[5], 0); + if (child->pktsize == 4) + serio_interrupt(ptport, packet[2], 0); + } } } @@ -720,6 +747,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) serio->write = synaptics_pt_write; serio->start = synaptics_pt_start; serio->stop = synaptics_pt_stop; + serio->open = synaptics_pt_open; + serio->close = synaptics_pt_close; serio->parent = psmouse->ps2dev.serio; psmouse->pt_activate = synaptics_pt_activate; @@ -1216,11 +1245,10 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) if (SYN_CAP_PASS_THROUGH(priv->info.capabilities) && synaptics_is_pt_packet(psmouse->packet)) { - if (priv->pt_port) - synaptics_pass_pt_packet(priv->pt_port, - psmouse->packet); - } else + synaptics_pass_pt_packet(priv, psmouse->packet); + } else { synaptics_process_packet(psmouse); + } return PSMOUSE_FULL_PACKET; } diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 899aee598632..3853165b6b3a 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -188,6 +188,7 @@ struct synaptics_data { bool disable_gesture; /* disable gestures */ struct serio *pt_port; /* Pass-through serio port */ + bool pt_port_open; /* * Last received Advanced Gesture Mode (AGM) packet. An AGM packet

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] Input: synaptics - fix crash when enabling pass-through port" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 08bd5b7c9a2401faabdaa1472d45c7de0755fd7e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021058-unthread-acutely-f430@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 08bd5b7c9a2401faabdaa1472d45c7de0755fd7e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Date: Fri, 17 Jan 2025 09:23:40 -0800 Subject: [PATCH] Input: synaptics - fix crash when enabling pass-through port When enabling a pass-through port an interrupt might come before psmouse driver binds to the pass-through port. However synaptics sub-driver tries to access psmouse instance presumably associated with the pass-through port to figure out if only 1 byte of response or entire protocol packet needs to be forwarded to the pass-through port and may crash if psmouse instance has not been attached to the port yet. Fix the crash by introducing open() and close() methods for the port and check if the port is open before trying to access psmouse instance. Because psmouse calls serio_open() only after attaching psmouse instance to serio port instance this prevents the potential crash. Reported-by: Takashi Iwai <tiwai(a)suse.de> Fixes: 100e16959c3c ("Input: libps2 - attach ps2dev instances as serio port's drvdata") Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522 Cc: stable(a)vger.kernel.org Reviewed-by: Takashi Iwai <tiwai(a)suse.de> Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 2735f86c23cc..aba57abe6978 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -665,23 +665,50 @@ static void synaptics_pt_stop(struct serio *serio) priv->pt_port = NULL; } +static int synaptics_pt_open(struct serio *serio) +{ + struct psmouse *parent = psmouse_from_serio(serio->parent); + struct synaptics_data *priv = parent->private; + + guard(serio_pause_rx)(parent->ps2dev.serio); + priv->pt_port_open = true; + + return 0; +} + +static void synaptics_pt_close(struct serio *serio) +{ + struct psmouse *parent = psmouse_from_serio(serio->parent); + struct synaptics_data *priv = parent->private; + + guard(serio_pause_rx)(parent->ps2dev.serio); + priv->pt_port_open = false; +} + static int synaptics_is_pt_packet(u8 *buf) { return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4; } -static void synaptics_pass_pt_packet(struct serio *ptport, u8 *packet) +static void synaptics_pass_pt_packet(struct synaptics_data *priv, u8 *packet) { - struct psmouse *child = psmouse_from_serio(ptport); + struct serio *ptport; - if (child && child->state == PSMOUSE_ACTIVATED) { - serio_interrupt(ptport, packet[1], 0); - serio_interrupt(ptport, packet[4], 0); - serio_interrupt(ptport, packet[5], 0); - if (child->pktsize == 4) - serio_interrupt(ptport, packet[2], 0); - } else { - serio_interrupt(ptport, packet[1], 0); + ptport = priv->pt_port; + if (!ptport) + return; + + serio_interrupt(ptport, packet[1], 0); + + if (priv->pt_port_open) { + struct psmouse *child = psmouse_from_serio(ptport); + + if (child->state == PSMOUSE_ACTIVATED) { + serio_interrupt(ptport, packet[4], 0); + serio_interrupt(ptport, packet[5], 0); + if (child->pktsize == 4) + serio_interrupt(ptport, packet[2], 0); + } } } @@ -720,6 +747,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) serio->write = synaptics_pt_write; serio->start = synaptics_pt_start; serio->stop = synaptics_pt_stop; + serio->open = synaptics_pt_open; + serio->close = synaptics_pt_close; serio->parent = psmouse->ps2dev.serio; psmouse->pt_activate = synaptics_pt_activate; @@ -1216,11 +1245,10 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) if (SYN_CAP_PASS_THROUGH(priv->info.capabilities) && synaptics_is_pt_packet(psmouse->packet)) { - if (priv->pt_port) - synaptics_pass_pt_packet(priv->pt_port, - psmouse->packet); - } else + synaptics_pass_pt_packet(priv, psmouse->packet); + } else { synaptics_process_packet(psmouse); + } return PSMOUSE_FULL_PACKET; } diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 899aee598632..3853165b6b3a 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -188,6 +188,7 @@ struct synaptics_data { bool disable_gesture; /* disable gestures */ struct serio *pt_port; /* Pass-through serio port */ + bool pt_port_open; /* * Last received Advanced Gesture Mode (AGM) packet. An AGM packet

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] clk: mediatek: mt2701-img: add missing dummy clk" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 366640868ccb4a7991aebe8442b01340fab218e2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021028-sanctity-giving-9e31@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 366640868ccb4a7991aebe8442b01340fab218e2 Mon Sep 17 00:00:00 2001 From: Daniel Golle <daniel(a)makrotopia.org> Date: Sun, 15 Dec 2024 22:14:48 +0000 Subject: [PATCH] clk: mediatek: mt2701-img: add missing dummy clk Add dummy clk for index 0 which was missed during the conversion to mtk_clk_simple_probe(). Fixes: 973d1607d936 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver") Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Golle <daniel(a)makrotopia.org> Link: https://lore.kernel.org/r/d677486a5c563fe5c47aa995841adc2aaa183b8a.17343006… Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> diff --git a/drivers/clk/mediatek/clk-mt2701-img.c b/drivers/clk/mediatek/clk-mt2701-img.c index 875594bc9dcb..c158e54c4652 100644 --- a/drivers/clk/mediatek/clk-mt2701-img.c +++ b/drivers/clk/mediatek/clk-mt2701-img.c @@ -22,6 +22,7 @@ static const struct mtk_gate_regs img_cg_regs = { GATE_MTK(_id, _name, _parent, &img_cg_regs, _shift, &mtk_clk_gate_ops_setclr) static const struct mtk_gate img_clks[] = { + GATE_DUMMY(CLK_DUMMY, "img_dummy"), GATE_IMG(CLK_IMG_SMI_COMM, "img_smi_comm", "mm_sel", 0), GATE_IMG(CLK_IMG_RESZ, "img_resz", "mm_sel", 1), GATE_IMG(CLK_IMG_JPGDEC_SMI, "img_jpgdec_smi", "mm_sel", 5),

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] clk: mediatek: mt2701-bdp: add missing dummy clk" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x fd291adc5e9a4ee6cd91e57f148f3b427f80647b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021017-tyke-stiffness-35bf@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From fd291adc5e9a4ee6cd91e57f148f3b427f80647b Mon Sep 17 00:00:00 2001 From: Daniel Golle <daniel(a)makrotopia.org> Date: Sun, 15 Dec 2024 22:14:24 +0000 Subject: [PATCH] clk: mediatek: mt2701-bdp: add missing dummy clk Add dummy clk for index 0 which was missed during the conversion to mtk_clk_simple_probe(). Fixes: 973d1607d936 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver") Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Golle <daniel(a)makrotopia.org> Link: https://lore.kernel.org/r/b8526c882a50f2b158df0eccb4a165956fd8fa13.17343006… Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> diff --git a/drivers/clk/mediatek/clk-mt2701-bdp.c b/drivers/clk/mediatek/clk-mt2701-bdp.c index 5da3eabffd3e..f11c7a4fa37b 100644 --- a/drivers/clk/mediatek/clk-mt2701-bdp.c +++ b/drivers/clk/mediatek/clk-mt2701-bdp.c @@ -31,6 +31,7 @@ static const struct mtk_gate_regs bdp1_cg_regs = { GATE_MTK(_id, _name, _parent, &bdp1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv) static const struct mtk_gate bdp_clks[] = { + GATE_DUMMY(CLK_DUMMY, "bdp_dummy"), GATE_BDP0(CLK_BDP_BRG_BA, "brg_baclk", "mm_sel", 0), GATE_BDP0(CLK_BDP_BRG_DRAM, "brg_dram", "mm_sel", 1), GATE_BDP0(CLK_BDP_LARB_DRAM, "larb_dram", "mm_sel", 2),

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] clk: mediatek: mt2701-vdec: fix conversion to" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 7c8746126a4e256fcf1af9174ee7d92cc3f3bc31 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021049-dipper-royal-a0b9@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7c8746126a4e256fcf1af9174ee7d92cc3f3bc31 Mon Sep 17 00:00:00 2001 From: Daniel Golle <daniel(a)makrotopia.org> Date: Sun, 15 Dec 2024 22:13:49 +0000 Subject: [PATCH] clk: mediatek: mt2701-vdec: fix conversion to mtk_clk_simple_probe Commit 973d1607d936 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver") broke DT bindings as the highest index was reduced by 1 because the id count starts from 1 and not from 0. Fix this, like for other drivers which had the same issue, by adding a dummy clk at index 0. Fixes: 973d1607d936 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver") Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Golle <daniel(a)makrotopia.org> Link: https://lore.kernel.org/r/b126a5577f3667ef19b1b5feea5e70174084fb03.17343006… Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> diff --git a/drivers/clk/mediatek/clk-mt2701-vdec.c b/drivers/clk/mediatek/clk-mt2701-vdec.c index 94db86f8d0a4..5299d92f3aba 100644 --- a/drivers/clk/mediatek/clk-mt2701-vdec.c +++ b/drivers/clk/mediatek/clk-mt2701-vdec.c @@ -31,6 +31,7 @@ static const struct mtk_gate_regs vdec1_cg_regs = { GATE_MTK(_id, _name, _parent, &vdec1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv) static const struct mtk_gate vdec_clks[] = { + GATE_DUMMY(CLK_DUMMY, "vdec_dummy"), GATE_VDEC0(CLK_VDEC_CKGEN, "vdec_cken", "vdec_sel", 0), GATE_VDEC1(CLK_VDEC_LARB, "vdec_larb_cken", "mm_sel", 0), };

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] Bluetooth: qca: Fix poor RF performance for WCN6855" failed to apply to 6.13-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.13.y git checkout FETCH_HEAD git cherry-pick -x a2fad248947d702ed3dcb52b8377c1a3ae201e44 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021049-during-buddhist-0ffa@gregkh' --subject-prefix 'PATCH 6.13.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a2fad248947d702ed3dcb52b8377c1a3ae201e44 Mon Sep 17 00:00:00 2001 From: Zijun Hu <quic_zijuhu(a)quicinc.com> Date: Mon, 13 Jan 2025 22:43:23 +0800 Subject: [PATCH] Bluetooth: qca: Fix poor RF performance for WCN6855 For WCN6855, board ID specific NVM needs to be downloaded once board ID is available, but the default NVM is always downloaded currently. The wrong NVM causes poor RF performance, and effects user experience for several types of laptop with WCN6855 on the market. Fix by downloading board ID specific NVM if board ID is available. Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855") Cc: stable(a)vger.kernel.org # 6.4 Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com> Tested-by: Johan Hovold <johan+linaro(a)kernel.org> Reviewed-by: Johan Hovold <johan+linaro(a)kernel.org> Tested-by: Steev Klimaszewski <steev(a)kali.org> #Thinkpad X13s Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index a6b53d1f23db..cdf09d9a9ad2 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -909,8 +909,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, "qca/msnv%02x.bin", rom_ver); break; case QCA_WCN6855: - snprintf(config.fwname, sizeof(config.fwname), - "qca/hpnv%02x.bin", rom_ver); + qca_read_fw_board_id(hdev, &boardid); + qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname), + "hpnv", soc_type, ver, rom_ver, boardid); break; case QCA_WCN7850: qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname),

4 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] Bluetooth: qca: Fix poor RF performance for WCN6855" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x a2fad248947d702ed3dcb52b8377c1a3ae201e44 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021049-unrated-entering-7761@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a2fad248947d702ed3dcb52b8377c1a3ae201e44 Mon Sep 17 00:00:00 2001 From: Zijun Hu <quic_zijuhu(a)quicinc.com> Date: Mon, 13 Jan 2025 22:43:23 +0800 Subject: [PATCH] Bluetooth: qca: Fix poor RF performance for WCN6855 For WCN6855, board ID specific NVM needs to be downloaded once board ID is available, but the default NVM is always downloaded currently. The wrong NVM causes poor RF performance, and effects user experience for several types of laptop with WCN6855 on the market. Fix by downloading board ID specific NVM if board ID is available. Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855") Cc: stable(a)vger.kernel.org # 6.4 Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com> Tested-by: Johan Hovold <johan+linaro(a)kernel.org> Reviewed-by: Johan Hovold <johan+linaro(a)kernel.org> Tested-by: Steev Klimaszewski <steev(a)kali.org> #Thinkpad X13s Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index a6b53d1f23db..cdf09d9a9ad2 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -909,8 +909,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, "qca/msnv%02x.bin", rom_ver); break; case QCA_WCN6855: - snprintf(config.fwname, sizeof(config.fwname), - "qca/hpnv%02x.bin", rom_ver); + qca_read_fw_board_id(hdev, &boardid); + qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname), + "hpnv", soc_type, ver, rom_ver, boardid); break; case QCA_WCN7850: qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname),

4 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025