February 2025 - Linux-stable-mirror

[PATCH net] selftests: mptcp: connect: -f: no reconnect

by Matthieu Baerts (NGI0)

The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE by closing the connection with unread bytes in the receive queue. The xdisconnect() helper was used to stop the connection, but it does more than that: it will shut it down, then wait before reconnecting to the same address. This causes the mptcp_join's "fastclose test" to fail all the time. This failure is due to a recent change, with commit 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect"), but that went unnoticed because the test is currently ignored. The recent modification only shown an existing issue: xdisconnect() doesn't need to be used here, only the shutdown() part is needed. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable(a)vger.kernel.org Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Notes: - The failure was not clearly visible on NIPA, because the results for the two impacted sub-tests are currently ignored (unstable). Still, it looks important to fix that, as this will help when the tests will be improved not to be unstable any more. --- tools/testing/selftests/net/mptcp/mptcp_connect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index 414addef9a4514c489ecd09249143fe0ce2af649..d240d02fa443a1cd802f0e705ab36db5c22063a8 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -1302,7 +1302,7 @@ int main_loop(void) return ret; if (cfg_truncate > 0) { - xdisconnect(fd); + shutdown(fd, SHUT_WR); } else if (--cfg_repeat > 0) { xdisconnect(fd); --- base-commit: 4241a702e0d0c2ca9364cfac08dbf134264962de change-id: 20250204-net-mptcp-sft-conn-f-d1c14274ba66 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

4 months, 3 weeks

2
1
0 0

[PATCH 6.6 0/6] md/md-bitmap: move bitmap_{start, end}write to md upper layer

by Yu Kuai

From: Yu Kuai <yukuai3(a)huawei.com> This set fix reported problem: https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts… https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcirc… See details in patch 6. Benjamin Marzinski (1): md/raid5: recheck if reshape has finished with device_lock held Yu Kuai (5): md/md-bitmap: factor behind write counters out from bitmap_{start/end}write() md/md-bitmap: remove the last parameter for bimtap_ops->endwrite() md: add a new callback pers->bitmap_sector() md/raid5: implement pers->bitmap_sector() md/md-bitmap: move bitmap_{start, end}write to md upper layer drivers/md/md-bitmap.c | 75 ++++++++++------- drivers/md/md-bitmap.h | 6 +- drivers/md/md.c | 26 ++++++ drivers/md/md.h | 5 ++ drivers/md/raid1.c | 35 ++------ drivers/md/raid1.h | 1 - drivers/md/raid10.c | 26 +----- drivers/md/raid10.h | 1 - drivers/md/raid5-cache.c | 4 - drivers/md/raid5.c | 174 ++++++++++++++++++++++----------------- drivers/md/raid5.h | 4 - 11 files changed, 185 insertions(+), 172 deletions(-) -- 2.39.2

4 months, 3 weeks

3
10
0 0

[PATCH 6.13 0/5] md/md-bitmap: move bitmap_{start, end}write to md upper layer

by Yu Kuai

This set fix reported problem: https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts… https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcirc… See details in patch 5. Yu Kuai (5): md/md-bitmap: factor behind write counters out from bitmap_{start/end}write() md/md-bitmap: remove the last parameter for bimtap_ops->endwrite() md: add a new callback pers->bitmap_sector() md/raid5: implement pers->bitmap_sector() md/md-bitmap: move bitmap_{start, end}write to md upper layer drivers/md/md-bitmap.c | 74 ++++++++++++++++---------- drivers/md/md-bitmap.h | 7 ++- drivers/md/md.c | 29 ++++++++++ drivers/md/md.h | 5 ++ drivers/md/raid1.c | 34 +++--------- drivers/md/raid1.h | 1 - drivers/md/raid10.c | 26 +-------- drivers/md/raid10.h | 1 - drivers/md/raid5-cache.c | 4 -- drivers/md/raid5.c | 111 ++++++++++++++++++++------------------- drivers/md/raid5.h | 4 -- 11 files changed, 149 insertions(+), 147 deletions(-) -- 2.39.2

4 months, 3 weeks

3
9
0 0

[PATCH] drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl

by Haoyu Li

In the "pmcmd_ioctl" function, three memory objects allocated by kmalloc are initialized by "hcall_get_cpu_state", which are then copied to user space. The initializer is indeed implemented in "acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of information leakage due to uninitialized bytes. Fixes: 3d679d5aec64 ("virt: acrn: Introduce interfaces to query C-states and P-states allowed by hypervisor") Signed-off-by: Haoyu Li <lihaoyu499(a)gmail.com> Cc: stable(a)vger.kernel.org --- drivers/virt/acrn/hsm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/virt/acrn/hsm.c b/drivers/virt/acrn/hsm.c index c24036c4e51e..e4e196abdaac 100644 --- a/drivers/virt/acrn/hsm.c +++ b/drivers/virt/acrn/hsm.c @@ -49,7 +49,7 @@ static int pmcmd_ioctl(u64 cmd, void __user *uptr) switch (cmd & PMCMD_TYPE_MASK) { case ACRN_PMCMD_GET_PX_CNT: case ACRN_PMCMD_GET_CX_CNT: - pm_info = kmalloc(sizeof(u64), GFP_KERNEL); + pm_info = kzalloc(sizeof(u64), GFP_KERNEL); if (!pm_info) return -ENOMEM; @@ -64,7 +64,7 @@ static int pmcmd_ioctl(u64 cmd, void __user *uptr) kfree(pm_info); break; case ACRN_PMCMD_GET_PX_DATA: - px_data = kmalloc(sizeof(*px_data), GFP_KERNEL); + px_data = kzalloc(sizeof(*px_data), GFP_KERNEL); if (!px_data) return -ENOMEM; @@ -79,7 +79,7 @@ static int pmcmd_ioctl(u64 cmd, void __user *uptr) kfree(px_data); break; case ACRN_PMCMD_GET_CX_DATA: - cx_data = kmalloc(sizeof(*cx_data), GFP_KERNEL); + cx_data = kzalloc(sizeof(*cx_data), GFP_KERNEL); if (!cx_data) return -ENOMEM; -- 2.34.1

4 months, 3 weeks

2
1
0 0

[PATCH] usb: roles: cache usb roles received during switch registration

by Elson Roy Serrao

The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, cache the last role received and set it once the switch registration is complete. Since we are now caching the roles based on registered flag, protect this flag with the switch mutex. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") cc: stable(a)vger.kernel.org Signed-off-by: Elson Roy Serrao <quic_eserrao(a)quicinc.com> --- drivers/usb/roles/class.c | 45 ++++++++++++++++++++++++++++++++------- 1 file changed, 37 insertions(+), 8 deletions(-) diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c index c58a12c147f4..c0149c31c01b 100644 --- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -26,6 +26,8 @@ struct usb_role_switch { struct mutex lock; /* device lock*/ struct module *module; /* the module this device depends on */ enum usb_role role; + enum usb_role cached_role; + bool cached; bool registered; /* From descriptor */ @@ -65,6 +67,20 @@ static const struct component_ops connector_ops = { .unbind = connector_unbind, }; +static int __usb_role_switch_set_role(struct usb_role_switch *sw, + enum usb_role role) +{ + int ret; + + ret = sw->set(sw, role); + if (!ret) { + sw->role = role; + kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE); + } + + return ret; +} + /** * usb_role_switch_set_role - Set USB role for a switch * @sw: USB role switch @@ -79,17 +95,21 @@ int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role) if (IS_ERR_OR_NULL(sw)) return 0; - if (!sw->registered) - return -EOPNOTSUPP; - + /* + * Since we have a valid sw struct here, role switch registration might + * be in progress. Hence cache the role here and send it out once + * registration is complete. + */ mutex_lock(&sw->lock); - - ret = sw->set(sw, role); - if (!ret) { - sw->role = role; - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE); + if (!sw->registered) { + sw->cached = true; + sw->cached_role = role; + mutex_unlock(&sw->lock); + return 0; } + ret = __usb_role_switch_set_role(sw, role); + mutex_unlock(&sw->lock); return ret; @@ -399,8 +419,14 @@ usb_role_switch_register(struct device *parent, dev_warn(&sw->dev, "failed to add component\n"); } + mutex_lock(&sw->lock); sw->registered = true; + if (sw->cached) + __usb_role_switch_set_role(sw, sw->cached_role); + + mutex_unlock(&sw->lock); + /* TODO: Symlinks for the host port and the device controller. */ return sw; @@ -417,7 +443,10 @@ void usb_role_switch_unregister(struct usb_role_switch *sw) { if (IS_ERR_OR_NULL(sw)) return; + mutex_lock(&sw->lock); sw->registered = false; + sw->cached = false; + mutex_unlock(&sw->lock); if (dev_fwnode(&sw->dev)) component_del(&sw->dev, &connector_ops); device_unregister(&sw->dev); -- 2.17.1

4 months, 3 weeks

3
2
0 0

[PATCH] soc: qcom: mark pd-mapper as broken

by Johan Hovold

When using the in-kernel pd-mapper on x1e80100, client drivers often fail to communicate with the firmware during boot, which specifically breaks battery and USB-C altmode notifications. This has been observed to happen on almost every second boot (41%) but likely depends on probe order: pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to send altmode request: 0x10 (-125) pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to request altmode notifications: -125 ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI read request: -125 qcom_battmgr.pmic_glink_power_supply pmic_glink.power-supply.0: failed to request power notifications In the same setup audio also fails to probe albeit much more rarely: PDR: avs/audio get domain list txn wait failed: -110 PDR: service lookup for avs/audio failed: -110 Chris Lew has provided an analysis and is working on a fix for the ECANCELED (125) errors, but it is not yet clear whether this will also address the audio regression. Even if this was first observed on x1e80100 there is currently no reason to believe that these issues are specific to that platform. Disable the in-kernel pd-mapper for now, and make sure to backport this to stable to prevent users and distros from migrating away from the user-space service. Fixes: 1ebcde047c54 ("soc: qcom: add pd-mapper implementation") Cc: stable(a)vger.kernel.org # 6.11 Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- It's now been over two months since I reported this regression, and even if we seem to be making some progress on at least some of these issues I think we need disable the pd-mapper temporarily until the fixes are in place (e.g. to prevent distros from dropping the user-space service). Johan #regzbot introduced: 1ebcde047c54 drivers/soc/qcom/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 74b9121240f8..35ddab9338d4 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -78,6 +78,7 @@ config QCOM_PD_MAPPER select QCOM_PDR_MSG select AUXILIARY_BUS depends on NET && QRTR && (ARCH_QCOM || COMPILE_TEST) + depends on BROKEN default QCOM_RPROC_COMMON help The Protection Domain Mapper maps registered services to the domains -- 2.45.2

4 months, 3 weeks

6
18
0 0

[PATCH AUTOSEL 6.13 01/16] ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params

by Sasha Levin

From: Bard Liao <yung-chuan.liao(a)linux.intel.com> [ Upstream commit 569922b82ca660f8b24e705f6cf674e6b1f99cc7 ] Each cpu DAI should associate with a widget. However, the topology might not create the right number of DAI widgets for aggregated amps. And it will cause NULL pointer deference. Check that the DAI widget associated with the CPU DAI is valid to prevent NULL pointer deference due to missing DAI widgets in topologies with aggregated amps. Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood(a)intel.com> Link: https://patch.msgid.link/20241203104853.56956-1-yung-chuan.liao@linux.intel… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda-dai.c | 12 ++++++++++++ sound/soc/sof/intel/hda.c | 5 +++++ 2 files changed, 17 insertions(+) diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c index 0db2a3e554fb2..da12aabc1bb85 100644 --- a/sound/soc/sof/intel/hda-dai.c +++ b/sound/soc/sof/intel/hda-dai.c @@ -503,6 +503,12 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream, int ret; int i; + if (!w) { + dev_err(cpu_dai->dev, "%s widget not found, check amp link num in the topology\n", + cpu_dai->name); + return -EINVAL; + } + ops = hda_dai_get_ops(substream, cpu_dai); if (!ops) { dev_err(cpu_dai->dev, "DAI widget ops not set\n"); @@ -582,6 +588,12 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream, */ for_each_rtd_cpu_dais(rtd, i, dai) { w = snd_soc_dai_get_widget(dai, substream->stream); + if (!w) { + dev_err(cpu_dai->dev, + "%s widget not found, check amp link num in the topology\n", + dai->name); + return -EINVAL; + } ipc4_copier = widget_to_copier(w); memcpy(&ipc4_copier->dma_config_tlv[cpu_dai_id], dma_config_tlv, sizeof(*dma_config_tlv)); diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index f991785f727e9..be689f6e10c81 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -63,6 +63,11 @@ static int sdw_params_stream(struct device *dev, struct snd_soc_dapm_widget *w = snd_soc_dai_get_widget(d, params_data->substream->stream); struct snd_sof_dai_config_data data = { 0 }; + if (!w) { + dev_err(dev, "%s widget not found, check amp link num in the topology\n", + d->name); + return -EINVAL; + } data.dai_index = (params_data->link_id << 8) | d->id; data.dai_data = params_data->alh_stream_id; data.dai_node_id = data.dai_data; -- 2.39.5

4 months, 3 weeks

3
18
0 0

[PATCH] ACPI: PRM: Remove unnecessary strict handler address checks

by Aubrey Li

Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context") added unnecessary strict handler address checks, caused the PRM module to fail in translating memory error addresses. Both static data buffer address and acpi parameter buffer address may be NULL if they are not needed, as described in section 4.1.2 PRM Handler Information Structure of Platform Runtime Mechanism specification [1]. Here are two examples from real hardware: ----PRMT.dsl---- - staic data address is not used [10Ch 0268 2] Revision : 0000 [10Eh 0270 2] Length : 002C [110h 0272 16] Handler GUID : F6A58D47-E04F-4F5A-86B8-2A50D4AA109B [120h 0288 8] Handler address : 0000000065CE51F4 [128h 0296 8] Satic Data Address : 0000000000000000 [130h 0304 8] ACPI Parameter Address : 000000006522A718 - ACPI parameter address is not used [1B0h 0432 2] Revision : 0000 [1B2h 0434 2] Length : 002C [1B4h 0436 16] Handler GUID : 657E8AE6-A8FC-4877-BB28-42E7DE1899A5 [1C4h 0452 8] Handler address : 0000000065C567C8 [1CCh 0460 8] Satic Data Address : 000000006113FB98 [1D4h 0468 8] ACPI Parameter Address : 0000000000000000 Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context") Reported-and-tested-by: Shi Liu <aurelianliu(a)tencent.com> Cc: All applicable <stable(a)vger.kernel.org> Signed-off-by: Aubrey Li <aubrey.li(a)linux.intel.com> Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechani… # [1] --- drivers/acpi/prmt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/acpi/prmt.c b/drivers/acpi/prmt.c index 747f83f7114d..e549914a636c 100644 --- a/drivers/acpi/prmt.c +++ b/drivers/acpi/prmt.c @@ -287,9 +287,7 @@ static acpi_status acpi_platformrt_space_handler(u32 function, if (!handler || !module) goto invalid_guid; - if (!handler->handler_addr || - !handler->static_data_buffer_addr || - !handler->acpi_param_buffer_addr) { + if (!handler->handler_addr) { buffer->prm_status = PRM_HANDLER_ERROR; return AE_OK; } -- 2.34.1

4 months, 3 weeks

4
3
0 0

Business Help

by Calib Cassim

Good Day, How are you? My name is Calib Cassim from Eskom Holdings Ltd. SA. I got your email from my personal search. I have in my position an (over-invoice / estimated) contract amount executed by a Foreign Contractor through my Department, which the contractor has been paid, and left the (over-invoice / estimated) amount with the Payor. So, I'm asking for your help to receive $25.5 Million on my behalf for my investment in your area, I will obtain all the needed legal documents in your name for the transfer of the amount to you. If you can help, please send me your phone number for easy communication. Thanks, Mr. Calib

4 months, 3 weeks

1
0
0 0

[PATCH v2] scsi: core: Do not retry I/Os during depopulation

by Igor Pylypiv

Fail I/Os instead of retry to prevent user space processes from being blocked on the I/O completion for several minutes. Retrying I/Os during "depopulation in progress" or "depopulation restore in progress" results in a continuous retry loop until the depopulation completes or until the I/O retry loop is aborted due to a timeout by the scsi_cmd_runtime_exceeced(). Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs. Most I/Os in the depopulation retry loop end up taking several minutes before returning the failure to user space. Cc: <stable(a)vger.kernel.org> # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress Cc: <stable(a)vger.kernel.org> # 4.18.x Fixes: e37c7d9a0341 ("scsi: core: sanitize++ in progress") Signed-off-by: Igor Pylypiv <ipylypiv(a)google.com> --- Changes in v2: - Added Fixes: and Cc: stable tags. drivers/scsi/scsi_lib.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e7ea1f04164a..3ab4c958da45 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -872,13 +872,18 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result) case 0x1a: /* start stop unit in progress */ case 0x1b: /* sanitize in progress */ case 0x1d: /* configuration in progress */ - case 0x24: /* depopulation in progress */ - case 0x25: /* depopulation restore in progress */ action = ACTION_DELAYED_RETRY; break; case 0x0a: /* ALUA state transition */ action = ACTION_DELAYED_REPREP; break; + /* + * Depopulation might take many hours, + * thus it is not worthwhile to retry. + */ + case 0x24: /* depopulation in progress */ + case 0x25: /* depopulation restore in progress */ + fallthrough; default: action = ACTION_FAIL; break; -- 2.48.1.362.g079036d154-goog

4 months, 3 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025