March 2025 - Linux-stable-mirror

[PATCH 1/2] cifs: fix integer overflow in match_server()

by Roman Smirnov

The echo_interval is not limited in any way during mounting, which makes it possible to write a large number to it. This can cause an overflow when multiplying ctx->echo_interval by HZ in match_server(). Add constraints for echo_interval to smb3_fs_context_parse_param(). Found by Linux Verification Center (linuxtesting.org) with Svace. Fixes: adfeb3e00e8e1 ("cifs: Make echo interval tunable") Cc: stable(a)vger.kernel.org Signed-off-by: Roman Smirnov <r.smirnov(a)omp.ru> --- fs/smb/client/fs_context.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c index 8c73d4d60d1a..e38521a713a6 100644 --- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -1377,6 +1377,11 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, ctx->closetimeo = HZ * result.uint_32; break; case Opt_echo_interval: + if (result.uint_32 < SMB_ECHO_INTERVAL_MIN || + result.uint_32 > SMB_ECHO_INTERVAL_MAX) { + cifs_errorf(fc, "echo interval is out of bounds\n"); + goto cifs_parse_mount_err; + } ctx->echo_interval = result.uint_32; break; case Opt_snapshot: -- 2.34.1

9 months

1
0
0 0

[PATCH 3/3] can: kvaser_pciefd: Continue parsing DMA buf after dropped RX

by Axel Forsman

Going bus-off on a channel doing RX could result in dropped packets. As netif_running() gets cleared before the channel abort procedure, the handling of any last RDATA packets would see netif_rx() return non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt with this "error" by breaking out of processing the remaining DMA RX buffer. Only return an error from kvaser_pciefd_read_buffer() due to packet corruption, otherwise handle it internally. Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> --- drivers/net/can/kvaser_pciefd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 6251a1ddfa7e..1f4004204fa8 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1216,7 +1216,7 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, skb = alloc_canfd_skb(priv->dev, &cf); if (!skb) { priv->dev->stats.rx_dropped++; - return -ENOMEM; + return 0; } cf->len = can_fd_dlc2len(dlc); @@ -1228,7 +1228,7 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, skb = alloc_can_skb(priv->dev, (struct can_frame **)&cf); if (!skb) { priv->dev->stats.rx_dropped++; - return -ENOMEM; + return 0; } can_frame_set_cc_len((struct can_frame *)cf, dlc, priv->ctrlmode); } @@ -1246,7 +1246,9 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, priv->dev->stats.rx_packets++; kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); - return netif_rx(skb); + netif_rx(skb); + + return 0; } static void kvaser_pciefd_change_state(struct kvaser_pciefd_can *can, -- 2.47.2

9 months

1
0
0 0

[PATCH RESEND] ocfs2: Validate chain list bits per cluster to prevent div-by-zero

by Qasim Ijaz

The call trace shows that the div error occurs on the following line where the code sets the e_cpos member of the extent record while dividing bg_bits by the bits per cluster value from the chain list: rec->e_cpos = cpu_to_le32(le16_to_cpu(bg->bg_bits) / le16_to_cpu(cl->cl_bpc)); Looking at the code disassembly we see the problem occurred during the divw instruction which performs a 16-bit unsigned divide operation. The main ways a divide error can occur is if: 1) the divisor is 0 2) if the quotient is too large for the designated register (overflow). Normally the divisor being 0 is the most common cause for a division error to occur. Focusing on the bits per cluster cl->cl_bpc (since it is the divisor) we see that cl is created in ocfs2_block_group_alloc(), cl is derived from ocfs2_dinode->id2.i_chain. To fix this issue we should verify the cl_bpc member in the chain list to ensure it is valid and non-zero. Looking through the rest of the OCFS2 code it seems like there are other places which could benefit from improved checks of the cl_bpc members of chain lists like the following: In ocfs2_group_extend(): cl_bpc = le16_to_cpu(fe->id2.i_chain.cl_bpc); if (le16_to_cpu(group->bg_bits) / cl_bpc + new_clusters > le16_to_cpu(fe->id2.i_chain.cl_cpg)) { ret = -EINVAL; goto out_unlock; } Reported-by: syzbot <syzbot+e41e83af7a07a4df8051(a)syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=e41e83af7a07a4df8051 Cc: stable(a)vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00(a)gmail.com> --- fs/ocfs2/resize.c | 4 ++-- fs/ocfs2/suballoc.c | 5 +++++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/resize.c b/fs/ocfs2/resize.c index b0733c08ed13..22352c027ecd 100644 --- a/fs/ocfs2/resize.c +++ b/fs/ocfs2/resize.c @@ -329,8 +329,8 @@ int ocfs2_group_extend(struct inode * inode, int new_clusters) group = (struct ocfs2_group_desc *)group_bh->b_data; cl_bpc = le16_to_cpu(fe->id2.i_chain.cl_bpc); - if (le16_to_cpu(group->bg_bits) / cl_bpc + new_clusters > - le16_to_cpu(fe->id2.i_chain.cl_cpg)) { + if (!cl_bpc || le16_to_cpu(group->bg_bits) / cl_bpc + new_clusters > + le16_to_cpu(fe->id2.i_chain.cl_cpg)) { ret = -EINVAL; goto out_unlock; } diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index f7b483f0de2a..844cb36bd7ab 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -671,6 +671,11 @@ static int ocfs2_block_group_alloc(struct ocfs2_super *osb, BUG_ON(ocfs2_is_cluster_bitmap(alloc_inode)); cl = &fe->id2.i_chain; + if (!le16_to_cpu(cl->cl_bpc)) { + status = -EINVAL; + goto bail; + } + status = ocfs2_reserve_clusters_with_limit(osb, le16_to_cpu(cl->cl_cpg), max_block, flags, &ac); -- 2.39.5

9 months

2
1
0 0

[PATCH] iio: light: opt3001: fix deadlock due to concurrent flag access

by Luca Ceresoli

The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock. Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages. Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: stable(a)vger.kernel.org Signed-off-by: Luca Ceresoli <luca.ceresoli(a)bootlin.com> --- drivers/iio/light/opt3001.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index 65b295877b41588d40234ca7681bfee291e937c2..393a3d2fbe1d7320a243d3b6720e98b90f17baca 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -788,8 +788,9 @@ static irqreturn_t opt3001_irq(int irq, void *_iio) int ret; bool wake_result_ready_queue = false; enum iio_chan_type chan_type = opt->chip_info->chan_type; + bool ok_to_ignore_lock = opt->ok_to_ignore_lock; - if (!opt->ok_to_ignore_lock) + if (!ok_to_ignore_lock) mutex_lock(&opt->lock); ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); @@ -826,7 +827,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio) } out: - if (!opt->ok_to_ignore_lock) + if (!ok_to_ignore_lock) mutex_unlock(&opt->lock); if (wake_result_ready_queue) --- base-commit: 250a4b882cf37d9719874253f055aad211f2c317 change-id: 20250321-opt3001-irq-fix-f7eecd4e2e9c Best regards, -- Luca Ceresoli <luca.ceresoli(a)bootlin.com>

9 months

2
1
0 0

[CI] drm/xe: Invalidate L3 read-only cachelines for geometry streams too

by Rodrigo Vivi

From: Kenneth Graunke <kenneth(a)whitecape.org> Historically, the Vertex Fetcher unit has not been an L3 client. That meant that, when a buffer containing vertex data was written to, it was necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any VF L2 cachelines associated with that buffer, so the new value would be properly read from memory. Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER have included an "L3 Bypass Enable" bit which userspace drivers can set to request that the vertex fetcher unit snoop L3. However, unlike most true L3 clients, the "VF Cache Invalidate" bit continues to only invalidate the VF L2 cache - and not any associated L3 lines. To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation Bit", which according to the docs, "controls the invalidation of the Geometry streams cached in L3 cache at the top of the pipe." In other words, the vertex and index buffer data that gets cached in L3 when "L3 Bypass Disable" is set. Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only Cache Invalidate so that both L2 and L3 vertex data is invalidated. xe is issuing VF cache invalidates too (which handles cases like CPU writes to a buffer between GPU batches). Because userspace may enable L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well. Fixes significant flickering in Firefox on Meteorlake, which was writing to vertex buffers via the CPU between batches; the missing L3 Read Only invalidates were causing the vertex fetcher to read stale data from L3. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460 Cc: stable(a)vger.kernel.org # v6.13+ Signed-off-by: Kenneth Graunke <kenneth(a)whitecape.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> --- drivers/gpu/drm/xe/instructions/xe_gpu_commands.h | 1 + drivers/gpu/drm/xe/xe_ring_ops.c | 13 +++++++++---- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h b/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h index a255946b6f77..8cfcd3360896 100644 --- a/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h +++ b/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h @@ -41,6 +41,7 @@ #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|((len)-2)) +#define PIPE_CONTROL0_L3_READ_ONLY_CACHE_INVALIDATE BIT(10) /* gen12 */ #define PIPE_CONTROL0_HDC_PIPELINE_FLUSH BIT(9) /* gen12 */ #define PIPE_CONTROL_COMMAND_CACHE_INVALIDATE (1<<29) diff --git a/drivers/gpu/drm/xe/xe_ring_ops.c b/drivers/gpu/drm/xe/xe_ring_ops.c index 917fc16de866..a7582b097ae6 100644 --- a/drivers/gpu/drm/xe/xe_ring_ops.c +++ b/drivers/gpu/drm/xe/xe_ring_ops.c @@ -137,7 +137,8 @@ emit_pipe_control(u32 *dw, int i, u32 bit_group_0, u32 bit_group_1, u32 offset, static int emit_pipe_invalidate(u32 mask_flags, bool invalidate_tlb, u32 *dw, int i) { - u32 flags = PIPE_CONTROL_CS_STALL | + u32 flags0 = 0; + u32 flags1 = PIPE_CONTROL_CS_STALL | PIPE_CONTROL_COMMAND_CACHE_INVALIDATE | PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE | PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE | @@ -148,11 +149,15 @@ static int emit_pipe_invalidate(u32 mask_flags, bool invalidate_tlb, u32 *dw, PIPE_CONTROL_STORE_DATA_INDEX; if (invalidate_tlb) - flags |= PIPE_CONTROL_TLB_INVALIDATE; + flags1 |= PIPE_CONTROL_TLB_INVALIDATE; - flags &= ~mask_flags; + flags1 &= ~mask_flags; - return emit_pipe_control(dw, i, 0, flags, LRC_PPHWSP_FLUSH_INVAL_SCRATCH_ADDR, 0); + if (flags1 & PIPE_CONTROL_VF_CACHE_INVALIDATE) + flags0 |= PIPE_CONTROL0_L3_READ_ONLY_CACHE_INVALIDATE; + + return emit_pipe_control(dw, i, flags0, flags1, + LRC_PPHWSP_FLUSH_INVAL_SCRATCH_ADDR, 0); } static int emit_store_imm_ppgtt_posted(u64 addr, u64 value, -- 2.49.0

9 months

1
0
0 0

[PATCH v3 1/2] serial: sifive: lock port in startup()/shutdown() callbacks

by Ryo Takakura

startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS. The register is also accessed from write() callback. If console were printing and startup()/shutdown() callback gets called, its access to the register could be overwritten. Add port->lock to startup()/shutdown() callbacks to make sure their access to SIFIVE_SERIAL_IE_OFFS is synchronized against write() callback. Signed-off-by: Ryo Takakura <ryotkkr98(a)gmail.com> Cc: stable(a)vger.kernel.org --- drivers/tty/serial/sifive.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 5904a2d4c..054a8e630 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -563,8 +563,11 @@ static void sifive_serial_break_ctl(struct uart_port *port, int break_state) static int sifive_serial_startup(struct uart_port *port) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + unsigned long flags; + uart_port_lock_irqsave(&ssp->port, &flags); __ssp_enable_rxwm(ssp); + uart_port_unlock_irqrestore(&ssp->port, flags); return 0; } @@ -572,9 +575,12 @@ static int sifive_serial_startup(struct uart_port *port) static void sifive_serial_shutdown(struct uart_port *port) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + unsigned long flags; + uart_port_lock_irqsave(&ssp->port, &flags); __ssp_disable_rxwm(ssp); __ssp_disable_txwm(ssp); + uart_port_unlock_irqrestore(&ssp->port, flags); } /** -- 2.34.1

9 months

1
0
0 0

[PATCH v2 1/2] serial: sifive: lock port in startup()/shutdown() callbacks

by Ryo Takakura

startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS. The register is also accessed from write() callback. If console were printing and startup()/shutdown() callback gets called, its access to the register could be overwritten. Add port->lock to startup()/shutdown() callbacks to make sure their access to SIFIVE_SERIAL_IE_OFFS is synchronized against write() callback. Signed-off-by: Ryo Takakura <ryotkkr98(a)gmail.com> --- drivers/tty/serial/sifive.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 5904a2d4c..054a8e630 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -563,8 +563,11 @@ static void sifive_serial_break_ctl(struct uart_port *port, int break_state) static int sifive_serial_startup(struct uart_port *port) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + unsigned long flags; + uart_port_lock_irqsave(&ssp->port, &flags); __ssp_enable_rxwm(ssp); + uart_port_unlock_irqrestore(&ssp->port, flags); return 0; } @@ -572,9 +575,12 @@ static int sifive_serial_startup(struct uart_port *port) static void sifive_serial_shutdown(struct uart_port *port) { struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + unsigned long flags; + uart_port_lock_irqsave(&ssp->port, &flags); __ssp_disable_rxwm(ssp); __ssp_disable_txwm(ssp); + uart_port_unlock_irqrestore(&ssp->port, flags); } /** -- 2.34.1

9 months

3
4
0 0

[PATCH RESEND#2 5.10.y] KEYS: asymmetric: properly validate hash_algo and encoding

by Sergey Shtylyov

From: Eric Biggers <ebiggers(a)google.com> [ Upstream commit 590bfb57b2328951d5833979e7ca1d5fde2e609a ] It is insecure to allow arbitrary hash algorithms and signature encodings to be used with arbitrary signature algorithms. Notably, ECDSA, ECRDSA, and SM2 all sign/verify raw hash values and don't disambiguate between different hash algorithms like RSA PKCS#1 v1.5 padding does. Therefore, they need to be restricted to certain sets of hash algorithms (ideally just one, but in practice small sets are used). Additionally, the encoding is an integral part of modern signature algorithms, and is not supposed to vary. Therefore, tighten the checks of hash_algo and encoding done by software_key_determine_akcipher(). Also rearrange the parameters to software_key_determine_akcipher() to put the public_key first, as this is the most important parameter and it often determines everything else. [s.shtylyov(a)omp.ru: removed the ECDSA related code.] Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys") Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm") Cc: stable(a)vger.kernel.org Tested-by: Stefan Berger <stefanb(a)linux.ibm.com> Tested-by: Tianjia Zhang <tianjia.zhang(a)linux.alibaba.com> Signed-off-by: Eric Biggers <ebiggers(a)google.com> Reviewed-by: Vitaly Chikunov <vt(a)altlinux.org> Reviewed-by: Jarkko Sakkinen <jarkko(a)kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> Signed-off-by: Sergey Shtylyov <s.shtylyov(a)omp.ru> --- Re-sending with LKML added and testers moved from the To: to Cc:... Re-sending again with the correct stable ML address... crypto/asymmetric_keys/public_key.c | 92 ++++++++++++++++++++++-------------- 1 file changed, 58 insertions(+), 34 deletions(-) Index: linux-stable/crypto/asymmetric_keys/public_key.c =================================================================== --- linux-stable.orig/crypto/asymmetric_keys/public_key.c +++ linux-stable/crypto/asymmetric_keys/public_key.c @@ -59,38 +59,65 @@ static void public_key_destroy(void *pay } /* - * Determine the crypto algorithm name. + * Given a public_key, and an encoding and hash_algo to be used for signing + * and/or verification with that key, determine the name of the corresponding + * akcipher algorithm. Also check that encoding and hash_algo are allowed. */ -static -int software_key_determine_akcipher(const char *encoding, - const char *hash_algo, - const struct public_key *pkey, - char alg_name[CRYPTO_MAX_ALG_NAME]) +static int +software_key_determine_akcipher(const struct public_key *pkey, + const char *encoding, const char *hash_algo, + char alg_name[CRYPTO_MAX_ALG_NAME]) { int n; - if (strcmp(encoding, "pkcs1") == 0) { - /* The data wangled by the RSA algorithm is typically padded - * and encoded in some manner, such as EMSA-PKCS1-1_5 [RFC3447 - * sec 8.2]. + if (!encoding) + return -EINVAL; + + if (strcmp(pkey->pkey_algo, "rsa") == 0) { + /* + * RSA signatures usually use EMSA-PKCS1-1_5 [RFC3447 sec 8.2]. */ + if (strcmp(encoding, "pkcs1") == 0) { + if (!hash_algo) + n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME, + "pkcs1pad(%s)", + pkey->pkey_algo); + else + n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME, + "pkcs1pad(%s,%s)", + pkey->pkey_algo, hash_algo); + return n >= CRYPTO_MAX_ALG_NAME ? -EINVAL : 0; + } + if (strcmp(encoding, "raw") != 0) + return -EINVAL; + /* + * Raw RSA cannot differentiate between different hash + * algorithms. + */ + if (hash_algo) + return -EINVAL; + } else if (strcmp(pkey->pkey_algo, "sm2") == 0) { + if (strcmp(encoding, "raw") != 0) + return -EINVAL; if (!hash_algo) - n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME, - "pkcs1pad(%s)", - pkey->pkey_algo); - else - n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME, - "pkcs1pad(%s,%s)", - pkey->pkey_algo, hash_algo); - return n >= CRYPTO_MAX_ALG_NAME ? -EINVAL : 0; - } - - if (strcmp(encoding, "raw") == 0) { - strcpy(alg_name, pkey->pkey_algo); - return 0; + return -EINVAL; + if (strcmp(hash_algo, "sm3") != 0) + return -EINVAL; + } else if (strcmp(pkey->pkey_algo, "ecrdsa") == 0) { + if (strcmp(encoding, "raw") != 0) + return -EINVAL; + if (!hash_algo) + return -EINVAL; + if (strcmp(hash_algo, "streebog256") != 0 && + strcmp(hash_algo, "streebog512") != 0) + return -EINVAL; + } else { + /* Unknown public key algorithm */ + return -ENOPKG; } - - return -ENOPKG; + if (strscpy(alg_name, pkey->pkey_algo, CRYPTO_MAX_ALG_NAME) < 0) + return -EINVAL; + return 0; } static u8 *pkey_pack_u32(u8 *dst, u32 val) @@ -111,9 +138,8 @@ static int software_key_query(const stru u8 *key, *ptr; int ret, len; - ret = software_key_determine_akcipher(params->encoding, - params->hash_algo, - pkey, alg_name); + ret = software_key_determine_akcipher(pkey, params->encoding, + params->hash_algo, alg_name); if (ret < 0) return ret; @@ -177,9 +203,8 @@ static int software_key_eds_op(struct ke pr_devel("==>%s()\n", __func__); - ret = software_key_determine_akcipher(params->encoding, - params->hash_algo, - pkey, alg_name); + ret = software_key_determine_akcipher(pkey, params->encoding, + params->hash_algo, alg_name); if (ret < 0) return ret; @@ -328,9 +353,8 @@ int public_key_verify_signature(const st BUG_ON(!sig); BUG_ON(!sig->s); - ret = software_key_determine_akcipher(sig->encoding, - sig->hash_algo, - pkey, alg_name); + ret = software_key_determine_akcipher(pkey, sig->encoding, + sig->hash_algo, alg_name); if (ret < 0) return ret;

9 months

1
0
0 0

Re: [PATCH RESEND 5.10.y] KEYS: asymmetric: properly validate hash_algo and encoding

by Sergey Shtylyov

Hello! Ugh, just realized that I managed to get the stable address wrong -- another resend needed... :-/ MBR, Sergey

9 months

1
0
0 0

[PATCH V2] USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02)

by Huacai Chen

The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw. MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible keyboard/mouse interface, which confuse the OHCI controller. Since OHCI only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR is wrapped around (the second 4KB BAR space is the same as the first 4KB internally). So we can add an 4KB offset (0x1000) to the OHCI registers (from the PCI BAR resource) as a quirk. Cc: stable(a)vger.kernel.org Suggested-by: Bjorn Helgaas <bhelgaas(a)google.com> Tested-by: Mingcong Bai <baimingcong(a)loongson.cn> Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> --- V2: add a comment explaining why the quirk is needed and how it fixes. drivers/usb/host/ohci-pci.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 900ea0d368e0..bd90b2fed51b 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -165,6 +165,24 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } +static int ohci_quirk_loongson(struct usb_hcd *hcd) +{ + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Loongson's LS7A OHCI controller (rev 0x02) has a + * flaw. MMIO register with offset 0x60/64 is treated + * as legacy PS2-compatible keyboard/mouse interface. + * Since OHCI only use 4KB BAR resource, LS7A OHCI's + * 32KB BAR is wrapped around (the 2nd 4KB BAR space + * is the same as the 1st 4KB internally). So add 4KB + * offset (0x1000) to the OHCI registers as a quirk. + */ + hcd->regs += (pdev->revision == 0x2) ? 0x1000 : 0x0; + + return 0; +} + static int ohci_quirk_qemu(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); @@ -224,6 +242,10 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, + { + PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a24), + .driver_data = (unsigned long)ohci_quirk_loongson, + }, { .vendor = PCI_VENDOR_ID_APPLE, .device = 0x003f, -- 2.47.1

9 months

3
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2025