From: Josef Bacik <josef(a)toxicpanda.com>
[ Upstream commit e03418abde871314e1a3a550f4c8afb7b89cb273 ]
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95abe2 ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
[2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2
[2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
[2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f]
[2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1
[2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0
[2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206
[2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0
[2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748
[2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9
[2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a
[2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8
[2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
[2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0
[2.621] Call Trace:
[2.621] <TASK>
[2.621] ? show_regs+0x74/0x80
[2.621] ? die_addr+0x46/0xc0
[2.621] ? exc_general_protection+0x161/0x2a0
[2.621] ? asm_exc_general_protection+0x26/0x30
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? btrfs_get_16+0x34b/0x6d0
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? __pfx_btrfs_get_16+0x10/0x10
[2.621] ? __pfx_mutex_unlock+0x10/0x10
[2.621] btrfs_match_dir_item_name+0x101/0x1a0
[2.621] btrfs_lookup_dir_item+0x1f3/0x280
[2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10
[2.621] btrfs_get_tree+0xd25/0x1910
Reported-by: lei lu <llfamsec(a)gmail.com>
CC: stable(a)vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu(a)suse.com>
Signed-off-by: Josef Bacik <josef(a)toxicpanda.com>
Reviewed-by: David Sterba <dsterba(a)suse.com>
[ copy more details from report ]
Signed-off-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
fs/btrfs/tree-checker.c | 30 +++++++++++++++---------------
fs/btrfs/tree-checker.h | 1 +
2 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c
index 53c74010140e..6d16506bbdc0 100644
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -1889,6 +1889,11 @@ enum btrfs_tree_block_status __btrfs_check_leaf(struct extent_buffer *leaf)
return BTRFS_TREE_BLOCK_INVALID_LEVEL;
}
+ if (unlikely(!btrfs_header_flag(leaf, BTRFS_HEADER_FLAG_WRITTEN))) {
+ generic_err(leaf, 0, "invalid flag for leaf, WRITTEN not set");
+ return BTRFS_TREE_BLOCK_WRITTEN_NOT_SET;
+ }
+
/*
* Extent buffers from a relocation tree have a owner field that
* corresponds to the subvolume tree they are based on. So just from an
@@ -1950,6 +1955,7 @@ enum btrfs_tree_block_status __btrfs_check_leaf(struct extent_buffer *leaf)
for (slot = 0; slot < nritems; slot++) {
u32 item_end_expected;
u64 item_data_end;
+ enum btrfs_tree_block_status ret;
btrfs_item_key_to_cpu(leaf, &key, slot);
@@ -2005,21 +2011,10 @@ enum btrfs_tree_block_status __btrfs_check_leaf(struct extent_buffer *leaf)
return BTRFS_TREE_BLOCK_INVALID_OFFSETS;
}
- /*
- * We only want to do this if WRITTEN is set, otherwise the leaf
- * may be in some intermediate state and won't appear valid.
- */
- if (btrfs_header_flag(leaf, BTRFS_HEADER_FLAG_WRITTEN)) {
- enum btrfs_tree_block_status ret;
-
- /*
- * Check if the item size and content meet other
- * criteria
- */
- ret = check_leaf_item(leaf, &key, slot, &prev_key);
- if (unlikely(ret != BTRFS_TREE_BLOCK_CLEAN))
- return ret;
- }
+ /* Check if the item size and content meet other criteria. */
+ ret = check_leaf_item(leaf, &key, slot, &prev_key);
+ if (unlikely(ret != BTRFS_TREE_BLOCK_CLEAN))
+ return ret;
prev_key.objectid = key.objectid;
prev_key.type = key.type;
@@ -2049,6 +2044,11 @@ enum btrfs_tree_block_status __btrfs_check_node(struct extent_buffer *node)
int level = btrfs_header_level(node);
u64 bytenr;
+ if (unlikely(!btrfs_header_flag(node, BTRFS_HEADER_FLAG_WRITTEN))) {
+ generic_err(node, 0, "invalid flag for node, WRITTEN not set");
+ return BTRFS_TREE_BLOCK_WRITTEN_NOT_SET;
+ }
+
if (unlikely(level <= 0 || level >= BTRFS_MAX_LEVEL)) {
generic_err(node, 0,
"invalid level for node, have %d expect [1, %d]",
diff --git a/fs/btrfs/tree-checker.h b/fs/btrfs/tree-checker.h
index 3c2a02a72f64..43f2ceb78f34 100644
--- a/fs/btrfs/tree-checker.h
+++ b/fs/btrfs/tree-checker.h
@@ -51,6 +51,7 @@ enum btrfs_tree_block_status {
BTRFS_TREE_BLOCK_INVALID_BLOCKPTR,
BTRFS_TREE_BLOCK_INVALID_ITEM,
BTRFS_TREE_BLOCK_INVALID_OWNER,
+ BTRFS_TREE_BLOCK_WRITTEN_NOT_SET,
};
/*
--
2.25.1
From: Mario Limonciello <mario.limonciello(a)amd.com>
[WHY]
DMUB locking is important to make sure that registers aren't accessed
while in PSR. Previously it was enabled but caused a deadlock in
situations with multiple eDP panels.
[HOW]
Detect if multiple eDP panels are in use to decide whether to use
lock. Refactor the function so that the first check is for PSR-SU
and then replay is in use to prevent having to look up number
of eDP panels for those configurations.
Fixes: f245b400a223 ("Revert "drm/amd/display: Use HW lock mgr for PSR1"")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3965
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung(a)amd.com>
Signed-off-by: Alex Hung <alex.hung(a)amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com>
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
(cherry picked from commit acbf16a6ae775b4db86f537448cc466288aa307e)
[superm1: Adjust for missing replay support bfeefe6ea5f1,
Adjust for dc_get_edp_links not being renamed from get_edp_links()]
Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com>
---
.../gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c b/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c
index 3f32e9c3fbaf..13995b6fb865 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c
@@ -67,5 +67,17 @@ bool should_use_dmub_lock(struct dc_link *link)
{
if (link->psr_settings.psr_version == DC_PSR_VERSION_SU_1)
return true;
+
+ /* only use HW lock for PSR1 on single eDP */
+ if (link->psr_settings.psr_version == DC_PSR_VERSION_1) {
+ struct dc_link *edp_links[MAX_NUM_EDP];
+ int edp_num;
+
+ get_edp_links(link->dc, edp_links, &edp_num);
+
+ if (edp_num == 1)
+ return true;
+ }
+
return false;
}
--
2.43.0
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 38f4aa34a5f737ea8588dac320d884cc2e762c03
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025032421-charging-glucose-8b79@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 38f4aa34a5f737ea8588dac320d884cc2e762c03 Mon Sep 17 00:00:00 2001
From: Justin Klaassen <justin(a)tidylabs.net>
Date: Tue, 25 Feb 2025 17:03:58 +0000
Subject: [PATCH] arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
The u2phy1_host should always have the same status as usb_host1_ehci
and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be
initialized for a disabled usb port.
Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to
the vdd_5v regulator.
Fixes: db792e9adbf8 ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S")
Cc: stable(a)vger.kernel.org
Signed-off-by: Justin Klaassen <justin(a)tidylabs.net>
Reviewed-by: Dragan Simic <dsimic(a)manjaro.org>
Link: https://lore.kernel.org/r/20250225170420.3898-1-justin@tidylabs.net
Signed-off-by: Heiko Stuebner <heiko(a)sntech.de>
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index b1c9bd0e63ef..8d94d9f91a5c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -115,7 +115,7 @@ &u2phy0_host {
};
&u2phy1_host {
- status = "disabled";
+ phy-supply = <&vdd_5v>;
};
&uart0 {
commit 76f970ce51c80f625eb6ddbb24e9cb51b977b598 upstream.
This reverts commit eff6c8ce8d4d7faef75f66614dd20bb50595d261.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d4d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze(a)amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann(a)arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org>
Signed-off-by: Ingo Molnar <mingo(a)kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot(a)linaro.org>
Tested-by: Hagar Hemdan <hagarhem(a)amazon.com>
Cc: Linus Torvalds <torvalds(a)linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
[Hagar: clean revert of eff6c8ce8dd7 to make it work on 6.6]
Signed-off-by: Hagar Hemdan <hagarhem(a)amazon.com>
---
kernel/sched/core.c | 22 +++-------------------
1 file changed, 3 insertions(+), 19 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 942734bf7347..8c5f75af07db 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -10494,7 +10494,7 @@ void sched_release_group(struct task_group *tg)
spin_unlock_irqrestore(&task_group_lock, flags);
}
-static struct task_group *sched_get_task_group(struct task_struct *tsk)
+static void sched_change_group(struct task_struct *tsk)
{
struct task_group *tg;
@@ -10506,13 +10506,7 @@ static struct task_group *sched_get_task_group(struct task_struct *tsk)
tg = container_of(task_css_check(tsk, cpu_cgrp_id, true),
struct task_group, css);
tg = autogroup_task_group(tsk, tg);
-
- return tg;
-}
-
-static void sched_change_group(struct task_struct *tsk, struct task_group *group)
-{
- tsk->sched_task_group = group;
+ tsk->sched_task_group = tg;
#ifdef CONFIG_FAIR_GROUP_SCHED
if (tsk->sched_class->task_change_group)
@@ -10533,19 +10527,10 @@ void sched_move_task(struct task_struct *tsk)
{
int queued, running, queue_flags =
DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK;
- struct task_group *group;
struct rq_flags rf;
struct rq *rq;
rq = task_rq_lock(tsk, &rf);
- /*
- * Esp. with SCHED_AUTOGROUP enabled it is possible to get superfluous
- * group changes.
- */
- group = sched_get_task_group(tsk);
- if (group == tsk->sched_task_group)
- goto unlock;
-
update_rq_clock(rq);
running = task_current(rq, tsk);
@@ -10556,7 +10541,7 @@ void sched_move_task(struct task_struct *tsk)
if (running)
put_prev_task(rq, tsk);
- sched_change_group(tsk, group);
+ sched_change_group(tsk);
if (queued)
enqueue_task(rq, tsk, queue_flags);
@@ -10570,7 +10555,6 @@ void sched_move_task(struct task_struct *tsk)
resched_curr(rq);
}
-unlock:
task_rq_unlock(rq, tsk, &rf);
}
--
2.47.1
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 38f4aa34a5f737ea8588dac320d884cc2e762c03
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025032420-nag-conclude-f944@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 38f4aa34a5f737ea8588dac320d884cc2e762c03 Mon Sep 17 00:00:00 2001
From: Justin Klaassen <justin(a)tidylabs.net>
Date: Tue, 25 Feb 2025 17:03:58 +0000
Subject: [PATCH] arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
The u2phy1_host should always have the same status as usb_host1_ehci
and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be
initialized for a disabled usb port.
Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to
the vdd_5v regulator.
Fixes: db792e9adbf8 ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S")
Cc: stable(a)vger.kernel.org
Signed-off-by: Justin Klaassen <justin(a)tidylabs.net>
Reviewed-by: Dragan Simic <dsimic(a)manjaro.org>
Link: https://lore.kernel.org/r/20250225170420.3898-1-justin@tidylabs.net
Signed-off-by: Heiko Stuebner <heiko(a)sntech.de>
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index b1c9bd0e63ef..8d94d9f91a5c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -115,7 +115,7 @@ &u2phy0_host {
};
&u2phy1_host {
- status = "disabled";
+ phy-supply = <&vdd_5v>;
};
&uart0 {
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 38f4aa34a5f737ea8588dac320d884cc2e762c03
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025032419-glaucoma-ascertain-be6e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 38f4aa34a5f737ea8588dac320d884cc2e762c03 Mon Sep 17 00:00:00 2001
From: Justin Klaassen <justin(a)tidylabs.net>
Date: Tue, 25 Feb 2025 17:03:58 +0000
Subject: [PATCH] arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
The u2phy1_host should always have the same status as usb_host1_ehci
and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be
initialized for a disabled usb port.
Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to
the vdd_5v regulator.
Fixes: db792e9adbf8 ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S")
Cc: stable(a)vger.kernel.org
Signed-off-by: Justin Klaassen <justin(a)tidylabs.net>
Reviewed-by: Dragan Simic <dsimic(a)manjaro.org>
Link: https://lore.kernel.org/r/20250225170420.3898-1-justin@tidylabs.net
Signed-off-by: Heiko Stuebner <heiko(a)sntech.de>
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index b1c9bd0e63ef..8d94d9f91a5c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -115,7 +115,7 @@ &u2phy0_host {
};
&u2phy1_host {
- status = "disabled";
+ phy-supply = <&vdd_5v>;
};
&uart0 {
From: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com>
[ Upstream commit b25e11f978b63cb7857890edb3a698599cddb10e ]
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4
("Bluetooth: Always request for user confirmation for Just Works")
always request user confirmation with confirm_hint set since the
likes of bluetoothd have dedicated policy around JUST_WORKS method
(e.g. main.conf:JustWorksRepairing).
CVE: CVE-2024-8805
Cc: stable(a)vger.kernel.org
Fixes: ba15a58b179e ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com>
Tested-by: Kiran K <kiran.k(a)intel.com>
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
net/bluetooth/hci_event.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 58c029958759..546795425119 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4751,19 +4751,16 @@ static void hci_user_confirm_request_evt(struct hci_dev *hdev,
goto unlock;
}
- /* If no side requires MITM protection; auto-accept */
+ /* If no side requires MITM protection; use JUST_CFM method */
if ((!loc_mitm || conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) &&
(!rem_mitm || conn->io_capability == HCI_IO_NO_INPUT_OUTPUT)) {
- /* If we're not the initiators request authorization to
- * proceed from user space (mgmt_user_confirm with
- * confirm_hint set to 1). The exception is if neither
- * side had MITM or if the local IO capability is
- * NoInputNoOutput, in which case we do auto-accept
+ /* If we're not the initiator of request authorization and the
+ * local IO capability is not NoInputNoOutput, use JUST_WORKS
+ * method (mgmt_user_confirm with confirm_hint set to 1).
*/
if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) &&
- conn->io_capability != HCI_IO_NO_INPUT_OUTPUT &&
- (loc_mitm || rem_mitm)) {
+ conn->io_capability != HCI_IO_NO_INPUT_OUTPUT) {
BT_DBG("Confirming auto-accept as acceptor");
confirm_hint = 1;
goto confirm;
--
2.34.1