March 2025 - Linux-stable-mirror

[PATCH v5 4/5] ASoC: qdsp6: q6apm-dai: set 10 ms period and buffer alignment.

by srinivas.kandagatla＠linaro.org

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> DSP expects the periods to be aligned to fragment sizes, currently setting up to hw constriants on periods bytes is not going to work correctly as we can endup with periods sizes aligned to 32 bytes however not aligned to fragment size. Update the constriants to use fragment size, and also set at step of 10ms for period size to accommodate DSP requirements of 10ms latency. Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support") Cc: stable(a)vger.kernel.org Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Tested-by: Johan Hovold <johan+linaro(a)kernel.org> --- sound/soc/qcom/qdsp6/q6apm-dai.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c index 90cb24947f31..180ff24041bf 100644 --- a/sound/soc/qcom/qdsp6/q6apm-dai.c +++ b/sound/soc/qcom/qdsp6/q6apm-dai.c @@ -385,13 +385,14 @@ static int q6apm_dai_open(struct snd_soc_component *component, } } - ret = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32); + /* setup 10ms latency to accommodate DSP restrictions */ + ret = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 480); if (ret < 0) { dev_err(dev, "constraint for period bytes step ret = %d\n", ret); goto err; } - ret = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32); + ret = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 480); if (ret < 0) { dev_err(dev, "constraint for buffer bytes step ret = %d\n", ret); goto err; -- 2.39.5

8 months

1
0
0 0

[PATCH v5 1/5] ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs

by srinivas.kandagatla＠linaro.org

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> With the existing code, we are only setting up one period at a time, in a ping-pong buffer style. This triggers lot of underruns in the dsp leading to jitter noise during audio playback. Fix this by scheduling all available periods, this will ensure that the dsp has enough buffer feed and ultimatley fixing the underruns and audio distortion. Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support") Cc: stable(a)vger.kernel.org Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Tested-by: Johan Hovold <johan+linaro(a)kernel.org> --- sound/soc/qcom/qdsp6/q6apm-dai.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c index c9404b5934c7..9d8e8e37c6de 100644 --- a/sound/soc/qcom/qdsp6/q6apm-dai.c +++ b/sound/soc/qcom/qdsp6/q6apm-dai.c @@ -70,6 +70,7 @@ struct q6apm_dai_rtd { unsigned int bytes_received; unsigned int copied_total; uint16_t bits_per_sample; + snd_pcm_uframes_t queue_ptr; bool next_track; enum stream_state state; struct q6apm_graph *graph; @@ -134,8 +135,6 @@ static void event_handler(uint32_t opcode, uint32_t token, void *payload, void * prtd->pos += prtd->pcm_count; spin_unlock_irqrestore(&prtd->lock, flags); snd_pcm_period_elapsed(substream); - if (prtd->state == Q6APM_STREAM_RUNNING) - q6apm_write_async(prtd->graph, prtd->pcm_count, 0, 0, 0); break; case APM_CLIENT_EVENT_DATA_READ_DONE: @@ -294,6 +293,27 @@ static int q6apm_dai_prepare(struct snd_soc_component *component, return 0; } +static int q6apm_dai_ack(struct snd_soc_component *component, struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct q6apm_dai_rtd *prtd = runtime->private_data; + int i, ret = 0, avail_periods; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + avail_periods = (runtime->control->appl_ptr - prtd->queue_ptr)/runtime->period_size; + for (i = 0; i < avail_periods; i++) { + ret = q6apm_write_async(prtd->graph, prtd->pcm_count, 0, 0, NO_TIMESTAMP); + if (ret < 0) { + dev_err(component->dev, "Error queuing playback buffer %d\n", ret); + return ret; + } + prtd->queue_ptr += runtime->period_size; + } + } + + return ret; +} + static int q6apm_dai_trigger(struct snd_soc_component *component, struct snd_pcm_substream *substream, int cmd) { @@ -305,9 +325,6 @@ static int q6apm_dai_trigger(struct snd_soc_component *component, case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - /* start writing buffers for playback only as we already queued capture buffers */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - ret = q6apm_write_async(prtd->graph, prtd->pcm_count, 0, 0, 0); break; case SNDRV_PCM_TRIGGER_STOP: /* TODO support be handled via SoftPause Module */ @@ -836,6 +853,7 @@ static const struct snd_soc_component_driver q6apm_fe_dai_component = { .hw_params = q6apm_dai_hw_params, .pointer = q6apm_dai_pointer, .trigger = q6apm_dai_trigger, + .ack = q6apm_dai_ack, .compress_ops = &q6apm_dai_compress_ops, .use_dai_pcm_id = true, }; -- 2.39.5

8 months

1
0
0 0

[PATCH] x86/Hyperv: Fix check of return value from snp_set_vmsa()

by Tianyu Lan

From: Tianyu Lan <tiala(a)microsoft.com> snp_set_vmsa() returns 0 as success result and so fix it. Cc: stable(a)vger.kernel.org Fixes: 44676bb9d566 ("x86/hyperv: Add smp support for SEV-SNP guest") Signed-off-by: Tianyu Lan <tiala(a)microsoft.com> --- arch/x86/hyperv/ivm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c index ec7880271cf9..77bf05f06b9e 100644 --- a/arch/x86/hyperv/ivm.c +++ b/arch/x86/hyperv/ivm.c @@ -338,7 +338,7 @@ int hv_snp_boot_ap(u32 cpu, unsigned long start_ip) vmsa->sev_features = sev_status >> 2; ret = snp_set_vmsa(vmsa, true); - if (!ret) { + if (ret) { pr_err("RMPADJUST(%llx) failed: %llx\n", (u64)vmsa, ret); free_page((u64)vmsa); return ret; -- 2.25.1

8 months

3
3
0 0

RE: Get premium contact lists

by Kevin Martin

Hi there, I wanted to check in to see if you've had a chance to review my previous message. Your feedback would be greatly appreciated. Best regards, Kevin ________________________________ From: Kevin Martin Sent: 12 March 2025 08:08 To: linux-stable-mirror(a)lists.linaro.org<mailto:linux-stable-mirror@lists.linaro.org> Subject: Get premium contact lists Hi there, Hope you're having a great day! Would you be interested in a recently verified list of NetApp clients to support your outreach? Let me know, and I'll be happy to share the details. Best regards, Kevin Martin Demand Consultant If you wish to stop receiving emails, reply with Abolish.

8 months

1
0
0 0

[PATCH v2 1/8] arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Cc: stable(a)vger.kernel.org # 6.8 Cc: Abel Vesa <abel.vesa(a)linaro.org> Cc: Rajendra Nayak <quic_rjendra(a)quicinc.com> Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1-crd.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index 9e587dc57532..22ebcbe54e24 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -610,6 +610,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -631,6 +632,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

8 months

3
2
0 0

[PATCH 2/4] netfs: Call `invalidate_cache` only if implemented

by David Howells

From: Max Kellermann <max.kellermann(a)ionos.com> Many filesystems such as NFS and Ceph do not implement the `invalidate_cache` method. On those filesystems, if writing to the cache (`NETFS_WRITE_TO_CACHE`) fails for some reason, the kernel crashes like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP PTI CPU: 9 UID: 0 PID: 3380 Comm: kworker/u193:11 Not tainted 6.13.3-cm4all1-hp #437 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_write_collection_worker RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffff9b86e2ca7dc0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 7fffffffffffffff RDX: 0000000000000001 RSI: ffff89259d576a18 RDI: ffff89259d576900 RBP: ffff89259d5769b0 R08: ffff9b86e2ca7d28 R09: 0000000000000002 R10: ffff89258ceaca80 R11: 0000000000000001 R12: 0000000000000020 R13: ffff893d158b9338 R14: ffff89259d576900 R15: ffff89259d5769b0 FS: 0000000000000000(0000) GS:ffff893c9fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000054442e003 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x15c/0x460 ? try_to_wake_up+0x2d2/0x530 ? exc_page_fault+0x5e/0x100 ? asm_exc_page_fault+0x22/0x30 netfs_write_collection_worker+0xe9f/0x12b0 ? xs_poll_check_readable+0x3f/0x80 ? xs_stream_data_receive_workfn+0x8d/0x110 process_one_work+0x134/0x2d0 worker_thread+0x299/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xba/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000000 This patch adds the missing `NULL` check. Fixes: 0e0f2dfe880f ("netfs: Dispatch write requests to process a writeback slice") Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Signed-off-by: Max Kellermann <max.kellermann(a)ionos.com> Signed-off-by: David Howells <dhowells(a)redhat.com> cc: netfs(a)lists.linux.dev cc: linux-cifs(a)vger.kernel.org cc: linux-fsdevel(a)vger.kernel.org cc: stable(a)vger.kernel.org --- fs/netfs/write_collect.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/netfs/write_collect.c b/fs/netfs/write_collect.c index 294f67795f79..3fca59e6475d 100644 --- a/fs/netfs/write_collect.c +++ b/fs/netfs/write_collect.c @@ -400,7 +400,8 @@ void netfs_write_collection_worker(struct work_struct *work) trace_netfs_rreq(wreq, netfs_rreq_trace_write_done); if (wreq->io_streams[1].active && - wreq->io_streams[1].failed) { + wreq->io_streams[1].failed && + ictx->ops->invalidate_cache) { /* Cache write failure doesn't prevent writeback completion * unless we're in disconnected mode. */

8 months

1
0
0 0

[PATCH v2 8/8] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies

by Johan Hovold

Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- .../qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 160c052db1ec..962fb050c55c 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -169,6 +170,23 @@ vreg_edp_3p3: regulator-edp-3p3 { regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -692,6 +710,9 @@ touchpad@15 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -703,6 +724,9 @@ touchpad@2c { hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -714,6 +738,9 @@ keyboard@3a { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default"; @@ -896,6 +923,9 @@ touchscreen@10 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; }; @@ -1037,6 +1067,19 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state { }; }; +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8"; -- 2.48.1

8 months

1
0
0 0

[PATCH v2 7/8] arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts") Cc: stable(a)vger.kernel.org # 6.8 Cc: Rajendra Nayak <quic_rjendra(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index ec594628304a..8f366bf61bbd 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -437,6 +437,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -458,6 +459,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

8 months

1
0
0 0

[PATCH v2 6/8] arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree") Cc: stable(a)vger.kernel.org # 6.11 Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index a3d53f2ba2c3..9d4ba9728355 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -290,6 +290,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l14b_3p0: ldo14 { @@ -304,8 +305,8 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; - }; regulators-1 { -- 2.48.1

8 months

1
0
0 0

[PATCH v2 5/8] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14") Cc: stable(a)vger.kernel.org # 6.14 Cc: Jens Glathe <jens.glathe(a)oldschoolsolutions.biz> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index cd860a246c45..ab5addb33b7a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -633,6 +633,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -654,6 +655,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.48.1

8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2025