The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable(a)vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 2821c27f317e..d06c724f63d9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -896,14 +896,16 @@ brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen)
}
/* 1) Prepare USB boot loader for runtime image */
- brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+ err = brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+ if (err)
+ goto fail;
rdlstate = le32_to_cpu(state.state);
rdlbytes = le32_to_cpu(state.bytes);
/* 2) Check we are in the Waiting state */
if (rdlstate != DL_WAITING) {
- brcmf_err("Failed to DL_START\n");
+ brcmf_err("Invalid DL state: %u\n", rdlstate);
err = -EINVAL;
goto fail;
}
--
2.42.0.windows.2
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96fc1 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic(a)linux.ibm.com>
Cc: stable(a)vger.kernel.org # v2.6.35+
---
@Michael: I think it would be nice to add a clarification on the byte
order to be used for cols and rows when the legacy interface is used to
the spec, regardless of what we decide the right byte order is. If
it is native endian that shall be stated much like it is stated for
virtio_console_control. If it is little endian, I would like to add
a sentence that states that unlike for the fields of virtio_console_control
the byte order of the fields of struct virtio_console_resize is little
endian also when the legacy interface is used.
@Maximilian: Would you mind giving this a spin with your implementation
on the device side of things in QEMU?
---
drivers/char/virtio_console.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 18f92dd44d45..fc698e2b1da1 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1579,8 +1579,8 @@ static void handle_control_message(struct virtio_device *vdev,
break;
case VIRTIO_CONSOLE_RESIZE: {
struct {
- __u16 rows;
- __u16 cols;
+ __virtio16 rows;
+ __virtio16 cols;
} size;
if (!is_console_port(port))
@@ -1588,7 +1588,8 @@ static void handle_control_message(struct virtio_device *vdev,
memcpy(&size, buf->buf + buf->offset + sizeof(*cpkt),
sizeof(size));
- set_console_size(port, size.rows, size.cols);
+ set_console_size(port, virtio16_to_cpu(vdev, size.rows),
+ virtio16_to_cpu(vdev, size.cols));
port->cons.hvc->irq_requested = 1;
resize_console(port);
base-commit: b3ee1e4609512dfff642a96b34d7e5dfcdc92d05
--
2.45.2
Implement the settling cycles encoding as specified in the AD5933
datasheet, Table 13 ("Number of Settling Times Cycles Register"). The
previous logic did not correctly translate the user-requested effective
cycle count into the required 9-bit base + 2-bit multiplier format
(D10..D0) for values exceeding 511.
Clamp the user input for out_altvoltage0_settling_cycles to the
maximum effective value of 2044 cycles (511 * 4x multiplier).
Fixes: f94aa354d676 ("iio: impedance-analyzer: New driver for AD5933/4 Impedance Converter, Network Analyzer")
Cc: stable(a)vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi(a)gmail.com>
---
Changes in v3:
- Only include fix (remove refactoring which will be its own
separate patch).
Changes in v2:
- Fix spacing in comment around '+'.
- Define mask and values for settling cycle multipliers.
---
drivers/staging/iio/impedance-analyzer/ad5933.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index d5544fc2fe989..f8fcc10ea8150 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -411,7 +411,7 @@ static ssize_t ad5933_store(struct device *dev,
ret = ad5933_cmd(st, 0);
break;
case AD5933_OUT_SETTLING_CYCLES:
- val = clamp(val, (u16)0, (u16)0x7FF);
+ val = clamp(val, (u16)0, (u16)0x7FC);
st->settling_cycles = val;
/* 2x, 4x handling, see datasheet */
--
2.43.0
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable(a)vger.kernel.org # v5.9+
Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Alexey Nepomnyashih <sdl(a)nppct.ru>
---
drivers/net/xen-netfront.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 63fe51d0e64d..1d3ff57a6125 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -985,20 +985,27 @@ static u32 xennet_run_xdp(struct netfront_queue *queue, struct page *pdata,
act = bpf_prog_run_xdp(prog, xdp);
switch (act) {
case XDP_TX:
- get_page(pdata);
xdpf = xdp_convert_buff_to_frame(xdp);
- err = xennet_xdp_xmit(queue->info->netdev, 1, &xdpf, 0);
- if (unlikely(!err))
- xdp_return_frame_rx_napi(xdpf);
- else if (unlikely(err < 0))
+ if (unlikely(!xdpf)) {
trace_xdp_exception(queue->info->netdev, prog, act);
+ break;
+ }
+ get_page(pdata);
+ err = xennet_xdp_xmit(queue->info->netdev, 1, &xdpf, 0);
+ if (unlikely(err <= 0)) {
+ if (err < 0)
+ trace_xdp_exception(queue->info->netdev, prog, act);
+ xdp_return_frame_rx_napi(xdpf);
+ }
break;
case XDP_REDIRECT:
get_page(pdata);
err = xdp_do_redirect(queue->info->netdev, xdp, prog);
*need_xdp_flush = true;
- if (unlikely(err))
+ if (unlikely(err)) {
trace_xdp_exception(queue->info->netdev, prog, act);
+ xdp_return_buff(xdp);
+ }
break;
case XDP_PASS:
case XDP_DROP:
--
2.43.0