May 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] mm: hugetlb: fix incorrect fallback for subpool" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x a833a693a490ecff8ba377654c6d4d333718b6b1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051959-steadily-imposing-a3e6@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a833a693a490ecff8ba377654c6d4d333718b6b1 Mon Sep 17 00:00:00 2001 From: Wupeng Ma <mawupeng1(a)huawei.com> Date: Thu, 10 Apr 2025 14:26:33 +0800 Subject: [PATCH] mm: hugetlb: fix incorrect fallback for subpool During our testing with hugetlb subpool enabled, we observe that hstate->resv_huge_pages may underflow into negative values. Root cause analysis reveals a race condition in subpool reservation fallback handling as follow: hugetlb_reserve_pages() /* Attempt subpool reservation */ gbl_reserve = hugepage_subpool_get_pages(spool, chg); /* Global reservation may fail after subpool allocation */ if (hugetlb_acct_memory(h, gbl_reserve) < 0) goto out_put_pages; out_put_pages: /* This incorrectly restores reservation to subpool */ hugepage_subpool_put_pages(spool, chg); When hugetlb_acct_memory() fails after subpool allocation, the current implementation over-commits subpool reservations by returning the full 'chg' value instead of the actual allocated 'gbl_reserve' amount. This discrepancy propagates to global reservations during subsequent releases, eventually causing resv_huge_pages underflow. This problem can be trigger easily with the following steps: 1. reverse hugepage for hugeltb allocation 2. mount hugetlbfs with min_size to enable hugetlb subpool 3. alloc hugepages with two task(make sure the second will fail due to insufficient amount of hugepages) 4. with for a few seconds and repeat step 3 which will make hstate->resv_huge_pages to go below zero. To fix this problem, return corrent amount of pages to subpool during the fallback after hugepage_subpool_get_pages is called. Link: https://lkml.kernel.org/r/20250410062633.3102457-1-mawupeng1@huawei.com Fixes: 1c5ecae3a93f ("hugetlbfs: add minimum size accounting to subpools") Signed-off-by: Wupeng Ma <mawupeng1(a)huawei.com> Tested-by: Joshua Hahn <joshua.hahnjy(a)gmail.com> Reviewed-by: Oscar Salvador <osalvador(a)suse.de> Cc: David Hildenbrand <david(a)redhat.com> Cc: Ma Wupeng <mawupeng1(a)huawei.com> Cc: Muchun Song <muchun.song(a)linux.dev> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 6ea1be71aa42..7ae38bfb9096 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3010,7 +3010,7 @@ struct folio *alloc_hugetlb_folio(struct vm_area_struct *vma, struct hugepage_subpool *spool = subpool_vma(vma); struct hstate *h = hstate_vma(vma); struct folio *folio; - long retval, gbl_chg; + long retval, gbl_chg, gbl_reserve; map_chg_state map_chg; int ret, idx; struct hugetlb_cgroup *h_cg = NULL; @@ -3163,8 +3163,16 @@ struct folio *alloc_hugetlb_folio(struct vm_area_struct *vma, hugetlb_cgroup_uncharge_cgroup_rsvd(idx, pages_per_huge_page(h), h_cg); out_subpool_put: - if (map_chg) - hugepage_subpool_put_pages(spool, 1); + /* + * put page to subpool iff the quota of subpool's rsv_hpages is used + * during hugepage_subpool_get_pages. + */ + if (map_chg && !gbl_chg) { + gbl_reserve = hugepage_subpool_put_pages(spool, 1); + hugetlb_acct_memory(h, -gbl_reserve); + } + + out_end_reservation: if (map_chg != MAP_CHG_ENFORCED) vma_end_reservation(h, vma, addr); @@ -7239,7 +7247,7 @@ bool hugetlb_reserve_pages(struct inode *inode, struct vm_area_struct *vma, vm_flags_t vm_flags) { - long chg = -1, add = -1; + long chg = -1, add = -1, spool_resv, gbl_resv; struct hstate *h = hstate_inode(inode); struct hugepage_subpool *spool = subpool_inode(inode); struct resv_map *resv_map; @@ -7374,8 +7382,16 @@ bool hugetlb_reserve_pages(struct inode *inode, return true; out_put_pages: - /* put back original number of pages, chg */ - (void)hugepage_subpool_put_pages(spool, chg); + spool_resv = chg - gbl_reserve; + if (spool_resv) { + /* put sub pool's reservation back, chg - gbl_reserve */ + gbl_resv = hugepage_subpool_put_pages(spool, spool_resv); + /* + * subpool's reserved pages can not be put back due to race, + * return to hstate. + */ + hugetlb_acct_memory(h, -gbl_resv); + } out_uncharge_cgroup: hugetlb_cgroup_uncharge_cgroup_rsvd(hstate_index(h), chg * pages_per_huge_page(h), h_cg);

4 months

1
0
0 0

FAILED: patch "[PATCH] wifi: mt76: disable napi on driver removal" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 78ab4be549533432d97ea8989d2f00b508fa68d8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051939-overbuilt-leverage-7eec@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 78ab4be549533432d97ea8989d2f00b508fa68d8 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin <pchelkin(a)ispras.ru> Date: Tue, 6 May 2025 14:55:39 +0300 Subject: [PATCH] wifi: mt76: disable napi on driver removal A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org). Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup") Cc: stable(a)vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> Tested-by: Ming Yen Hsieh <mingyen.hsieh(a)mediatek.com> Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru Signed-off-by: Felix Fietkau <nbd(a)nbd.name> diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c index 844af16ee551..35b4ec91979e 100644 --- a/drivers/net/wireless/mediatek/mt76/dma.c +++ b/drivers/net/wireless/mediatek/mt76/dma.c @@ -1011,6 +1011,7 @@ void mt76_dma_cleanup(struct mt76_dev *dev) int i; mt76_worker_disable(&dev->tx_worker); + napi_disable(&dev->tx_napi); netif_napi_del(&dev->tx_napi); for (i = 0; i < ARRAY_SIZE(dev->phys); i++) {

4 months

1
0
0 0

FAILED: patch "[PATCH] scsi: sd_zbc: block: Respect bio vector limits for REPORT" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x e8007fad5457ea547ca63bb011fdb03213571c7e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051959-relieving-trifocals-0eed@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e8007fad5457ea547ca63bb011fdb03213571c7e Mon Sep 17 00:00:00 2001 From: Steve Siwinski <ssiwinski(a)atto.com> Date: Thu, 8 May 2025 16:01:22 -0400 Subject: [PATCH] scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer The REPORT ZONES buffer size is currently limited by the HBA's maximum segment count to ensure the buffer can be mapped. However, the block layer further limits the number of iovec entries to 1024 when allocating a bio. To avoid allocation of buffers too large to be mapped, further restrict the maximum buffer size to BIO_MAX_INLINE_VECS. Replace the UIO_MAXIOV symbolic name with the more contextually appropriate BIO_MAX_INLINE_VECS. Fixes: b091ac616846 ("sd_zbc: Fix report zones buffer allocation") Cc: stable(a)vger.kernel.org Signed-off-by: Steve Siwinski <ssiwinski(a)atto.com> Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/block/bio.c b/block/bio.c index 4e6c85a33d74..4be592d37fb6 100644 --- a/block/bio.c +++ b/block/bio.c @@ -611,7 +611,7 @@ struct bio *bio_kmalloc(unsigned short nr_vecs, gfp_t gfp_mask) { struct bio *bio; - if (nr_vecs > UIO_MAXIOV) + if (nr_vecs > BIO_MAX_INLINE_VECS) return NULL; return kmalloc(struct_size(bio, bi_inline_vecs, nr_vecs), gfp_mask); } diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 7a447ff600d2..a8db66428f80 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -169,6 +169,7 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, unsigned int nr_zones, size_t *buflen) { struct request_queue *q = sdkp->disk->queue; + unsigned int max_segments; size_t bufsize; void *buf; @@ -180,12 +181,15 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, * Furthermore, since the report zone command cannot be split, make * sure that the allocated buffer can always be mapped by limiting the * number of pages allocated to the HBA max segments limit. + * Since max segments can be larger than the max inline bio vectors, + * further limit the allocated buffer to BIO_MAX_INLINE_VECS. */ nr_zones = min(nr_zones, sdkp->zone_info.nr_zones); bufsize = roundup((nr_zones + 1) * 64, SECTOR_SIZE); bufsize = min_t(size_t, bufsize, queue_max_hw_sectors(q) << SECTOR_SHIFT); - bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT); + max_segments = min(BIO_MAX_INLINE_VECS, queue_max_segments(q)); + bufsize = min_t(size_t, bufsize, max_segments << PAGE_SHIFT); while (bufsize >= SECTOR_SIZE) { buf = kvzalloc(bufsize, GFP_KERNEL | __GFP_NORETRY); diff --git a/include/linux/bio.h b/include/linux/bio.h index cafc7c215de8..b786ec5bcc81 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -11,6 +11,7 @@ #include <linux/uio.h> #define BIO_MAX_VECS 256U +#define BIO_MAX_INLINE_VECS UIO_MAXIOV struct queue_limits;

4 months

1
0
0 0

FAILED: patch "[PATCH] scsi: sd_zbc: block: Respect bio vector limits for REPORT" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x e8007fad5457ea547ca63bb011fdb03213571c7e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051959-radiantly-ominous-f8f3@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e8007fad5457ea547ca63bb011fdb03213571c7e Mon Sep 17 00:00:00 2001 From: Steve Siwinski <ssiwinski(a)atto.com> Date: Thu, 8 May 2025 16:01:22 -0400 Subject: [PATCH] scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer The REPORT ZONES buffer size is currently limited by the HBA's maximum segment count to ensure the buffer can be mapped. However, the block layer further limits the number of iovec entries to 1024 when allocating a bio. To avoid allocation of buffers too large to be mapped, further restrict the maximum buffer size to BIO_MAX_INLINE_VECS. Replace the UIO_MAXIOV symbolic name with the more contextually appropriate BIO_MAX_INLINE_VECS. Fixes: b091ac616846 ("sd_zbc: Fix report zones buffer allocation") Cc: stable(a)vger.kernel.org Signed-off-by: Steve Siwinski <ssiwinski(a)atto.com> Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/block/bio.c b/block/bio.c index 4e6c85a33d74..4be592d37fb6 100644 --- a/block/bio.c +++ b/block/bio.c @@ -611,7 +611,7 @@ struct bio *bio_kmalloc(unsigned short nr_vecs, gfp_t gfp_mask) { struct bio *bio; - if (nr_vecs > UIO_MAXIOV) + if (nr_vecs > BIO_MAX_INLINE_VECS) return NULL; return kmalloc(struct_size(bio, bi_inline_vecs, nr_vecs), gfp_mask); } diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 7a447ff600d2..a8db66428f80 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -169,6 +169,7 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, unsigned int nr_zones, size_t *buflen) { struct request_queue *q = sdkp->disk->queue; + unsigned int max_segments; size_t bufsize; void *buf; @@ -180,12 +181,15 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, * Furthermore, since the report zone command cannot be split, make * sure that the allocated buffer can always be mapped by limiting the * number of pages allocated to the HBA max segments limit. + * Since max segments can be larger than the max inline bio vectors, + * further limit the allocated buffer to BIO_MAX_INLINE_VECS. */ nr_zones = min(nr_zones, sdkp->zone_info.nr_zones); bufsize = roundup((nr_zones + 1) * 64, SECTOR_SIZE); bufsize = min_t(size_t, bufsize, queue_max_hw_sectors(q) << SECTOR_SHIFT); - bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT); + max_segments = min(BIO_MAX_INLINE_VECS, queue_max_segments(q)); + bufsize = min_t(size_t, bufsize, max_segments << PAGE_SHIFT); while (bufsize >= SECTOR_SIZE) { buf = kvzalloc(bufsize, GFP_KERNEL | __GFP_NORETRY); diff --git a/include/linux/bio.h b/include/linux/bio.h index cafc7c215de8..b786ec5bcc81 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -11,6 +11,7 @@ #include <linux/uio.h> #define BIO_MAX_VECS 256U +#define BIO_MAX_INLINE_VECS UIO_MAXIOV struct queue_limits;

4 months

1
0
0 0

FAILED: patch "[PATCH] scsi: sd_zbc: block: Respect bio vector limits for REPORT" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x e8007fad5457ea547ca63bb011fdb03213571c7e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051958-canal-tidbit-2b4d@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e8007fad5457ea547ca63bb011fdb03213571c7e Mon Sep 17 00:00:00 2001 From: Steve Siwinski <ssiwinski(a)atto.com> Date: Thu, 8 May 2025 16:01:22 -0400 Subject: [PATCH] scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer The REPORT ZONES buffer size is currently limited by the HBA's maximum segment count to ensure the buffer can be mapped. However, the block layer further limits the number of iovec entries to 1024 when allocating a bio. To avoid allocation of buffers too large to be mapped, further restrict the maximum buffer size to BIO_MAX_INLINE_VECS. Replace the UIO_MAXIOV symbolic name with the more contextually appropriate BIO_MAX_INLINE_VECS. Fixes: b091ac616846 ("sd_zbc: Fix report zones buffer allocation") Cc: stable(a)vger.kernel.org Signed-off-by: Steve Siwinski <ssiwinski(a)atto.com> Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/block/bio.c b/block/bio.c index 4e6c85a33d74..4be592d37fb6 100644 --- a/block/bio.c +++ b/block/bio.c @@ -611,7 +611,7 @@ struct bio *bio_kmalloc(unsigned short nr_vecs, gfp_t gfp_mask) { struct bio *bio; - if (nr_vecs > UIO_MAXIOV) + if (nr_vecs > BIO_MAX_INLINE_VECS) return NULL; return kmalloc(struct_size(bio, bi_inline_vecs, nr_vecs), gfp_mask); } diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 7a447ff600d2..a8db66428f80 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -169,6 +169,7 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, unsigned int nr_zones, size_t *buflen) { struct request_queue *q = sdkp->disk->queue; + unsigned int max_segments; size_t bufsize; void *buf; @@ -180,12 +181,15 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, * Furthermore, since the report zone command cannot be split, make * sure that the allocated buffer can always be mapped by limiting the * number of pages allocated to the HBA max segments limit. + * Since max segments can be larger than the max inline bio vectors, + * further limit the allocated buffer to BIO_MAX_INLINE_VECS. */ nr_zones = min(nr_zones, sdkp->zone_info.nr_zones); bufsize = roundup((nr_zones + 1) * 64, SECTOR_SIZE); bufsize = min_t(size_t, bufsize, queue_max_hw_sectors(q) << SECTOR_SHIFT); - bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT); + max_segments = min(BIO_MAX_INLINE_VECS, queue_max_segments(q)); + bufsize = min_t(size_t, bufsize, max_segments << PAGE_SHIFT); while (bufsize >= SECTOR_SIZE) { buf = kvzalloc(bufsize, GFP_KERNEL | __GFP_NORETRY); diff --git a/include/linux/bio.h b/include/linux/bio.h index cafc7c215de8..b786ec5bcc81 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -11,6 +11,7 @@ #include <linux/uio.h> #define BIO_MAX_VECS 256U +#define BIO_MAX_INLINE_VECS UIO_MAXIOV struct queue_limits;

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051926-moonlit-rash-12a3@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051925-shine-trump-fcd5@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051924-cofounder-rotten-e3f9@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051923-subwoofer-bullpen-424f@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051922-retrial-capsule-56c7@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051921-mortuary-renter-2468@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051920-hemlock-tableful-9784@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:30 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index bb05fd26eb7f..00ce564463de 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */ +#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; + guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO; @@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20); writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put; - status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } } rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -479,6 +486,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val; + guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false; val = readl(usb2_base + USB2_INT_ENABLE); @@ -498,16 +507,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0; - mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; } + guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -517,7 +527,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock); return 0; } @@ -528,18 +537,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false; if (channel->vbus) ret = regulator_disable(channel->vbus); -out: - mutex_unlock(&channel->lock); - return ret; } @@ -750,7 +753,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; - mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051915-festival-pasta-654b@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051913-shaky-bamboo-9c7a@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051914-destiny-cesarean-1d44@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051914-stopwatch-crumpet-385d@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051908-smock-python-51a3@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051908-squiggle-pastrami-b849@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x 9ce71e85b29eb63e48e294479742e670513f03a0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051907-refinance-ventricle-ea1c@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce71e85b29eb63e48e294479742e670513f03a0 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Date: Wed, 7 May 2025 15:50:31 +0300 Subject: [PATCH] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.rene… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 00ce564463de..118899efda70 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -537,9 +537,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; - scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false; + if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

4 months

1
0
0 0

FAILED: patch "[PATCH] net: dsa: microchip: let phylink manage PHY EEE configuration" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 76ca05e0abe31a4f47a5b5a85041b5a22c03baf8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051904-lung-dreaded-8c5a@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 76ca05e0abe31a4f47a5b5a85041b5a22c03baf8 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel <o.rempel(a)pengutronix.de> Date: Sun, 4 May 2025 10:14:33 +0200 Subject: [PATCH] net: dsa: microchip: let phylink manage PHY EEE configuration on KSZ switches Phylink expects MAC drivers to provide LPI callbacks to properly manage Energy Efficient Ethernet (EEE) configuration. On KSZ switches with integrated PHYs, LPI is internally handled by hardware, while ports without integrated PHYs have no documented MAC-level LPI support. Provide dummy mac_disable_tx_lpi() and mac_enable_tx_lpi() callbacks to satisfy phylink requirements. Also, set default EEE capabilities during phylink initialization where applicable. Since phylink can now gracefully handle optional EEE configuration, remove the need for the MICREL_NO_EEE PHY flag. This change addresses issues caused by incomplete EEE refactoring introduced in commit fe0d4fd9285e ("net: phy: Keep track of EEE configuration"). It is not easily possible to fix all older kernels, but this patch ensures proper behavior on latest kernels and can be considered for backporting to stable kernels starting from v6.14. Fixes: fe0d4fd9285e ("net: phy: Keep track of EEE configuration") Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Cc: stable(a)vger.kernel.org # v6.14+ Link: https://patch.msgid.link/20250504081434.424489-2-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 89f0796894af..f95a9aac56ee 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -265,16 +265,70 @@ static void ksz_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface); +/** + * ksz_phylink_mac_disable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * + * This function is a dummy handler. See ksz_phylink_mac_enable_tx_lpi() for + * a detailed explanation of EEE/LPI handling in KSZ switches. + */ +static void ksz_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ +} + +/** + * ksz_phylink_mac_enable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * @timer: timer value before entering LPI (unused) + * @tx_clock_stop: whether to stop the TX clock in LPI mode (unused) + * + * This function signals to phylink that the driver architecture supports + * LPI management, enabling phylink to control EEE advertisement during + * negotiation according to IEEE Std 802.3 (Clause 78). + * + * Hardware Management of EEE/LPI State: + * For KSZ switch ports with integrated PHYs (e.g., KSZ9893R ports 1-2), + * observation and testing suggest that the actual EEE / Low Power Idle (LPI) + * state transitions are managed autonomously by the hardware based on + * the auto-negotiation results. (Note: While the datasheet describes EEE + * operation based on negotiation, it doesn't explicitly detail the internal + * MAC/PHY interaction, so autonomous hardware management of the MAC state + * for LPI is inferred from observed behavior). + * This hardware control, consistent with the switch's ability to operate + * autonomously via strapping, means MAC-level software intervention is not + * required or exposed for managing the LPI state once EEE is negotiated. + * (Ref: KSZ9893R Data Sheet DS00002420D, primarily Section 4.7.5 explaining + * EEE, also Sections 4.1.7 on Auto-Negotiation and 3.2.1 on Configuration + * Straps). + * + * Additionally, ports configured as MAC interfaces (e.g., KSZ9893R port 3) + * lack documented MAC-level LPI control. + * + * Therefore, this callback performs no action and serves primarily to inform + * phylink of LPI awareness and to document the inferred hardware behavior. + * + * Returns: 0 (Always success) + */ +static int ksz_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + return 0; +} + static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = { .mac_config = ksz88x3_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct phylink_mac_ops ksz8_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct ksz_dev_ops ksz88xx_dev_ops = { @@ -358,6 +412,8 @@ static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct ksz_dev_ops ksz9477_dev_ops = { @@ -401,6 +457,8 @@ static const struct phylink_mac_ops lan937x_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct ksz_dev_ops lan937x_dev_ops = { @@ -2016,6 +2074,18 @@ static void ksz_phylink_get_caps(struct dsa_switch *ds, int port, if (dev->dev_ops->get_caps) dev->dev_ops->get_caps(dev, port, config); + + if (ds->ops->support_eee && ds->ops->support_eee(ds, port)) { + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); + + config->lpi_capabilities = MAC_100FD; + if (dev->info->gbit_capable[port]) + config->lpi_capabilities |= MAC_1000FD; + + /* EEE is fully operational */ + config->eee_enabled_default = true; + } } void ksz_r_mib_stats64(struct ksz_device *dev, int port) @@ -3008,31 +3078,6 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) if (!port) return MICREL_KSZ8_P1_ERRATA; break; - case KSZ8567_CHIP_ID: - /* KSZ8567R Errata DS80000752C Module 4 */ - case KSZ8765_CHIP_ID: - case KSZ8794_CHIP_ID: - case KSZ8795_CHIP_ID: - /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ - case KSZ9477_CHIP_ID: - /* KSZ9477S Errata DS80000754A Module 4 */ - case KSZ9567_CHIP_ID: - /* KSZ9567S Errata DS80000756A Module 4 */ - case KSZ9896_CHIP_ID: - /* KSZ9896C Errata DS80000757A Module 3 */ - case KSZ9897_CHIP_ID: - case LAN9646_CHIP_ID: - /* KSZ9897R Errata DS80000758C Module 4 */ - /* Energy Efficient Ethernet (EEE) feature select must be manually disabled - * The EEE feature is enabled by default, but it is not fully - * operational. It must be manually disabled through register - * controls. If not disabled, the PHY ports can auto-negotiate - * to enable EEE, and this feature can cause link drops when - * linked to another device supporting EEE. - * - * The same item appears in the errata for all switches above. - */ - return MICREL_NO_EEE; } return 0; @@ -3466,6 +3511,20 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) return -EOPNOTSUPP; } +/** + * ksz_support_eee - Determine Energy Efficient Ethernet (EEE) support for a + * port + * @ds: Pointer to the DSA switch structure + * @port: Port number to check + * + * This function also documents devices where EEE was initially advertised but + * later withdrawn due to reliability issues, as described in official errata + * documents. These devices are explicitly listed to record known limitations, + * even if there is no technical necessity for runtime checks. + * + * Returns: true if the internal PHY on the given port supports fully + * operational EEE, false otherwise. + */ static bool ksz_support_eee(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; @@ -3475,15 +3534,35 @@ static bool ksz_support_eee(struct dsa_switch *ds, int port) switch (dev->chip_id) { case KSZ8563_CHIP_ID: - case KSZ8567_CHIP_ID: - case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: - case KSZ9567_CHIP_ID: case KSZ9893_CHIP_ID: + return true; + case KSZ8567_CHIP_ID: + /* KSZ8567R Errata DS80000752C Module 4 */ + case KSZ8765_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8795_CHIP_ID: + /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ + case KSZ9477_CHIP_ID: + /* KSZ9477S Errata DS80000754A Module 4 */ + case KSZ9567_CHIP_ID: + /* KSZ9567S Errata DS80000756A Module 4 */ case KSZ9896_CHIP_ID: + /* KSZ9896C Errata DS80000757A Module 3 */ case KSZ9897_CHIP_ID: case LAN9646_CHIP_ID: - return true; + /* KSZ9897R Errata DS80000758C Module 4 */ + /* Energy Efficient Ethernet (EEE) feature select must be + * manually disabled + * The EEE feature is enabled by default, but it is not fully + * operational. It must be manually disabled through register + * controls. If not disabled, the PHY ports can auto-negotiate + * to enable EEE, and this feature can cause link drops when + * linked to another device supporting EEE. + * + * The same item appears in the errata for all switches above. + */ + break; } return false;

4 months

1
0
0 0

[PATCH] gpio: sysfs: add missing mutex_destroy()

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> We initialize the data->mutex in gpiod_export() but lack the corresponding mutex_destroy() in gpiod_unexport() causing a resource leak with mutex debugging enabled. Add the call right before kfreeing the GPIO data. Fixes: 6ffcb7971486 ("gpio: sysfs: use per-gpio locking") Cc: stable(a)vger.kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- drivers/gpio/gpiolib-sysfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 4a3aa09dad9d..cd3381a4bc93 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -713,6 +713,7 @@ void gpiod_unexport(struct gpio_desc *desc) } put_device(dev); + mutex_destroy(&data->mutex); kfree(data); } EXPORT_SYMBOL_GPL(gpiod_unexport); -- 2.45.2

4 months

2
6
0 0

FAILED: patch "[PATCH] ftrace: Fix preemption accounting for stacktrace filter" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 11aff32439df6ca5b3b891b43032faf88f4a6a29 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051939-front-expediter-3ddd@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 11aff32439df6ca5b3b891b43032faf88f4a6a29 Mon Sep 17 00:00:00 2001 From: pengdonglin <pengdonglin(a)xiaomi.com> Date: Mon, 12 May 2025 17:42:46 +0800 Subject: [PATCH] ftrace: Fix preemption accounting for stacktrace filter command The preemption count of the stacktrace filter command to trace ksys_read is consistently incorrect: $ echo ksys_read:stacktrace > set_ftrace_filter <...>-453 [004] ...1. 38.308956: <stack trace> => ksys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe The root cause is that the trace framework disables preemption when invoking the filter command callback in function_trace_probe_call: preempt_disable_notrace(); probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data); preempt_enable_notrace(); Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(), which will output the correct preemption count: $ echo ksys_read:stacktrace > set_ftrace_filter <...>-410 [006] ..... 31.420396: <stack trace> => ksys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe Cc: stable(a)vger.kernel.org Fixes: 36590c50b2d07 ("tracing: Merge irqflags + preempt counter.") Link: https://lore.kernel.org/20250512094246.1167956-2-dolinux.peng@gmail.com Signed-off-by: pengdonglin <dolinux.peng(a)gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 98ccf3f00c51..4e37a0f6aaa3 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -633,11 +633,7 @@ ftrace_traceoff(unsigned long ip, unsigned long parent_ip, static __always_inline void trace_stack(struct trace_array *tr) { - unsigned int trace_ctx; - - trace_ctx = tracing_gen_ctx(); - - __trace_stack(tr, trace_ctx, FTRACE_STACK_SKIP); + __trace_stack(tr, tracing_gen_ctx_dec(), FTRACE_STACK_SKIP); } static void

4 months

1
0
0 0

FAILED: patch "[PATCH] ftrace: Fix preemption accounting for stacktrace filter" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 11aff32439df6ca5b3b891b43032faf88f4a6a29 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051938-tweezers-vendor-8ef7@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 11aff32439df6ca5b3b891b43032faf88f4a6a29 Mon Sep 17 00:00:00 2001 From: pengdonglin <pengdonglin(a)xiaomi.com> Date: Mon, 12 May 2025 17:42:46 +0800 Subject: [PATCH] ftrace: Fix preemption accounting for stacktrace filter command The preemption count of the stacktrace filter command to trace ksys_read is consistently incorrect: $ echo ksys_read:stacktrace > set_ftrace_filter <...>-453 [004] ...1. 38.308956: <stack trace> => ksys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe The root cause is that the trace framework disables preemption when invoking the filter command callback in function_trace_probe_call: preempt_disable_notrace(); probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data); preempt_enable_notrace(); Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(), which will output the correct preemption count: $ echo ksys_read:stacktrace > set_ftrace_filter <...>-410 [006] ..... 31.420396: <stack trace> => ksys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe Cc: stable(a)vger.kernel.org Fixes: 36590c50b2d07 ("tracing: Merge irqflags + preempt counter.") Link: https://lore.kernel.org/20250512094246.1167956-2-dolinux.peng@gmail.com Signed-off-by: pengdonglin <dolinux.peng(a)gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 98ccf3f00c51..4e37a0f6aaa3 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -633,11 +633,7 @@ ftrace_traceoff(unsigned long ip, unsigned long parent_ip, static __always_inline void trace_stack(struct trace_array *tr) { - unsigned int trace_ctx; - - trace_ctx = tracing_gen_ctx(); - - __trace_stack(tr, trace_ctx, FTRACE_STACK_SKIP); + __trace_stack(tr, tracing_gen_ctx_dec(), FTRACE_STACK_SKIP); } static void

4 months

1
0
0 0

FAILED: patch "[PATCH] ftrace: Fix preemption accounting for stacktrace trigger" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x e333332657f615ac2b55aa35565c4a882018bbe9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051919-daintily-bountiful-20e1@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e333332657f615ac2b55aa35565c4a882018bbe9 Mon Sep 17 00:00:00 2001 From: pengdonglin <pengdonglin(a)xiaomi.com> Date: Mon, 12 May 2025 17:42:45 +0800 Subject: [PATCH] ftrace: Fix preemption accounting for stacktrace trigger command When using the stacktrace trigger command to trace syscalls, the preemption count was consistently reported as 1 when the system call event itself had 0 ("."). For example: root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read $ echo stacktrace > trigger $ echo 1 > enable sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000) sshd-416 [002] ...1. 232.864913: <stack trace> => ftrace_syscall_enter => syscall_trace_enter => do_syscall_64 => entry_SYSCALL_64_after_hwframe The root cause is that the trace framework disables preemption in __DO_TRACE before invoking the trigger callback. Use the tracing_gen_ctx_dec() that will accommodate for the increase of the preemption count in __DO_TRACE when calling the callback. The result is the accurate reporting of: sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000) sshd-410 [004] ..... 210.117662: <stack trace> => ftrace_syscall_enter => syscall_trace_enter => do_syscall_64 => entry_SYSCALL_64_after_hwframe Cc: stable(a)vger.kernel.org Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance") Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com Signed-off-by: pengdonglin <dolinux.peng(a)gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index b66b6d235d91..6e87ae2a1a66 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1560,7 +1560,7 @@ stacktrace_trigger(struct event_trigger_data *data, struct trace_event_file *file = data->private_data; if (file) - __trace_stack(file->tr, tracing_gen_ctx(), STACK_SKIP); + __trace_stack(file->tr, tracing_gen_ctx_dec(), STACK_SKIP); else trace_dump_stack(STACK_SKIP); }

4 months

1
0
0 0

FAILED: patch "[PATCH] ftrace: Fix preemption accounting for stacktrace trigger" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x e333332657f615ac2b55aa35565c4a882018bbe9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051918-embellish-voting-0097@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e333332657f615ac2b55aa35565c4a882018bbe9 Mon Sep 17 00:00:00 2001 From: pengdonglin <pengdonglin(a)xiaomi.com> Date: Mon, 12 May 2025 17:42:45 +0800 Subject: [PATCH] ftrace: Fix preemption accounting for stacktrace trigger command When using the stacktrace trigger command to trace syscalls, the preemption count was consistently reported as 1 when the system call event itself had 0 ("."). For example: root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read $ echo stacktrace > trigger $ echo 1 > enable sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000) sshd-416 [002] ...1. 232.864913: <stack trace> => ftrace_syscall_enter => syscall_trace_enter => do_syscall_64 => entry_SYSCALL_64_after_hwframe The root cause is that the trace framework disables preemption in __DO_TRACE before invoking the trigger callback. Use the tracing_gen_ctx_dec() that will accommodate for the increase of the preemption count in __DO_TRACE when calling the callback. The result is the accurate reporting of: sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000) sshd-410 [004] ..... 210.117662: <stack trace> => ftrace_syscall_enter => syscall_trace_enter => do_syscall_64 => entry_SYSCALL_64_after_hwframe Cc: stable(a)vger.kernel.org Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance") Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com Signed-off-by: pengdonglin <dolinux.peng(a)gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index b66b6d235d91..6e87ae2a1a66 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1560,7 +1560,7 @@ stacktrace_trigger(struct event_trigger_data *data, struct trace_event_file *file = data->private_data; if (file) - __trace_stack(file->tr, tracing_gen_ctx(), STACK_SKIP); + __trace_stack(file->tr, tracing_gen_ctx_dec(), STACK_SKIP); else trace_dump_stack(STACK_SKIP); }

4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025