commit 968f19c5b1b7d5595423b0ac0020cc18dfed8cb5 upstream.
[BUG]
It is a long known bug that VM image on btrfs can lead to data csum
mismatch, if the qemu is using direct-io for the image (this is commonly
known as cache mode 'none').
[CAUSE]
Inside the VM, if the fs is EXT4 or XFS, or even NTFS from Windows, the
fs is allowed to dirty/modify the folio even if the folio is under
writeback (as long as the address space doesn't have AS_STABLE_WRITES
flag inherited from the block device).
This is a valid optimization to improve the concurrency, and since these
filesystems have no extra checksum on data, the content change is not a
problem at all.
Bu the final write into the image file is handled by btrfs, which needs
the content not to be modified during writeback, or the checksum will
not match the data (checksum is calculated before submitting the bio).
So EXT4/XFS/NTRFS assume they can modify the folio under writeback, but
btrfs requires no modification, this leads to the false csum mismatch.
This is only a controlled example, there are even cases where
multi-thread programs can submit a direct IO write, then another thread
modifies the direct IO buffer for whatever reason.
For such cases, btrfs has no sane way to detect such cases and leads to
false data csum mismatch.
[FIX]
I have considered the following ideas to solve the problem:
- Make direct IO to always skip data checksum
This not only requires a new incompatible flag, as it breaks the
current per-inode NODATASUM flag.
But also requires extra handling for no csum found cases.
And this also reduces our checksum protection.
- Let hardware handle all the checksum
AKA, just nodatasum mount option.
That requires trust for hardware (which is not that trustful in a lot
of cases), and it's not generic at all.
- Always fallback to buffered write if the inode requires checksum
This was suggested by Christoph, and is the solution utilized by this
patch.
The cost is obvious, the extra buffer copying into page cache, thus it
reduces the performance.
But at least it's still user configurable, if the end user still wants
the zero-copy performance, just set NODATASUM flag for the inode
(which is a common practice for VM images on btrfs).
Since we cannot trust user space programs to keep the buffer
consistent during direct IO, we have no choice but always falling back
to buffered IO. At least by this, we avoid the more deadly false data
checksum mismatch error.
CC: stable(a)vger.kernel.org # 6.12+
Suggested-by: Christoph Hellwig <hch(a)infradead.org>
Reviewed-by: Filipe Manana <fdmanana(a)suse.com>
Signed-off-by: Qu Wenruo <wqu(a)suse.com>
Reviewed-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: David Sterba <dsterba(a)suse.com>
---
fs/btrfs/direct-io.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/fs/btrfs/direct-io.c b/fs/btrfs/direct-io.c
index 8567af46e16f..eacbb74bf6bc 100644
--- a/fs/btrfs/direct-io.c
+++ b/fs/btrfs/direct-io.c
@@ -855,6 +855,22 @@ ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
btrfs_inode_unlock(BTRFS_I(inode), ilock_flags);
goto buffered;
}
+ /*
+ * We can't control the folios being passed in, applications can write
+ * to them while a direct IO write is in progress. This means the
+ * content might change after we calculated the data checksum.
+ * Therefore we can end up storing a checksum that doesn't match the
+ * persisted data.
+ *
+ * To be extra safe and avoid false data checksum mismatch, if the
+ * inode requires data checksum, just fallback to buffered IO.
+ * For buffered IO we have full control of page cache and can ensure
+ * no one is modifying the content during writeback.
+ */
+ if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) {
+ btrfs_inode_unlock(BTRFS_I(inode), ilock_flags);
+ goto buffered;
+ }
/*
* The iov_iter can be mapped to the same file range we are writing to.
--
2.49.0
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 687b2bae0efff9b25e071737d6af5004e6e35af5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051212-antirust-outshoot-07f7@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 687b2bae0efff9b25e071737d6af5004e6e35af5 Mon Sep 17 00:00:00 2001
From: Jens Axboe <axboe(a)kernel.dk>
Date: Wed, 7 May 2025 07:34:24 -0600
Subject: [PATCH] io_uring: ensure deferred completions are flushed for
multishot
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable(a)vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer(a)apple.com>
Reported-by: Christian Mazakas <christian.mazakas(a)gmail.com>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 769814d71153..541e65a1eebf 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -848,6 +848,14 @@ bool io_req_post_cqe(struct io_kiocb *req, s32 res, u32 cflags)
struct io_ring_ctx *ctx = req->ctx;
bool posted;
+ /*
+ * If multishot has already posted deferred completions, ensure that
+ * those are flushed first before posting this one. If not, CQEs
+ * could get reordered.
+ */
+ if (!wq_list_empty(&ctx->submit_state.compl_reqs))
+ __io_submit_flush_completions(ctx);
+
lockdep_assert(!io_wq_current_is_worker());
lockdep_assert_held(&ctx->uring_lock);
Hi stable(a)vger.kernel.org,
Could you please apply:
1. Commit a7208610761ae ("Bluetooth: btmtk: Remove resetting mt7921
before downloading the fw") to v6.12.x (it's already in
v6.14).
2. Commit 33634e2ab7c6 ("Bluetooth: btmtk: Remove the resetting step
before downloading the fw") to v6.12.x and v6.14.x.
These fixes address an issue with some audio interfaces failing to
initialise during boot on kernels 6.11+. As noted in my original
analysis below, the MediaTek Bluetooth controller reset increases the
device setup time from ~200ms to ~20s and can interfere with other USB
devices on the bus.
Thanks,
Geoffrey.
On Fri, Mar 28, 2025 at 08:44:49AM +1030, Geoffrey D. Bennett wrote:
> Hi all,
>
> Sorry, I see that an identical patch has already been applied to
> bluetooth-next
> https://lore.kernel.org/linux-bluetooth/20250315022730.11071-1-hao.qin@medi…
>
> While I'm glad the issue is being addressed, my original patch
> https://lore.kernel.org/linux-bluetooth/Z8ybV04CVUfVAykH@m.b4.vu/
> contained useful context and tags that didn't make it into the final
> commit.
>
> For getting this fix into current kernel releases 6.12/6.13/6.14, I
> think the patch needs the "Cc: stable(a)vger.kernel.org" tag that was in
> my original submission but missing from Hao's. Since this is causing
> significant issues for users on kernels 6.11+ (audio interfaces
> failing to work), it's important this gets backported.
>
> Hao, is this something you can do? I think the instructions at
> https://www.kernel.org/doc/html/v6.14/process/stable-kernel-rules.html#opti…
> need to be followed, but I've not done this before.
>
> Thanks,
> Geoffrey.
>
> On Fri, Mar 28, 2025 at 07:22:06AM +1030, Geoffrey D. Bennett wrote:
> > This reverts commit ccfc8948d7e4d93cab341a99774b24586717d89a.
> >
> > The MediaTek Bluetooth controller reset that was added increases the
> > Bluetooth device setup time from ~200ms to ~20s and interferes with
> > other devices on the bus.
> >
> > Three users (with Focusrite Scarlett 2nd Gen 6i6 and 3rd Gen Solo and
> > 4i4 audio interfaces) reported that since 6.11 (which added this
> > commit) their audio interface fails to initialise if connected during
> > boot. Two of the users confirmed they have an MT7922.
> >
> > Errors like this are observed in dmesg for the audio interface:
> >
> > usb 3-4: parse_audio_format_rates_v2v3(): unable to find clock source (clock -110)
> > usb 3-4: uac_clock_source_is_valid(): cannot get clock validity for id 41
> > usb 3-4: clock source 41 is not valid, cannot use
> >
> > The problem only occurs when both devices and kernel modules are
> > present and loaded during system boot, so it can be worked around by
> > connecting the audio interface after booting.
> >
> > Fixes: ccfc8948d7e4 ("Bluetooth: btusb: mediatek: reset the controller before downloading the fw")
> > Closes: https://github.com/geoffreybennett/linux-fcp/issues/24
> > Bisected-by: Benedikt Ziemons <ben(a)rs485.network>
> > Tested-by: Benedikt Ziemons <ben(a)rs485.network>
> > Cc: stable(a)vger.kernel.org
> > Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu>
> > ---
> > Changelog:
> >
> > v1 -> v2:
> >
> > - Updated commit message with additional information.
> > - No change to this patch's diff.
> > - Dropped alternate patch that only reverted for 0x7922.
> > - Chris, Sean, Hao agreed to reverting the change:
> > https://lore.kernel.org/linux-bluetooth/2025031352-octopus-quadrant-f7ca@gr…
> >
> > drivers/bluetooth/btmtk.c | 10 ----------
> > 1 file changed, 10 deletions(-)
> >
> > diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> > index 68846c5bd4f7..4390fd571dbd 100644
> > --- a/drivers/bluetooth/btmtk.c
> > +++ b/drivers/bluetooth/btmtk.c
> > @@ -1330,13 +1330,6 @@ int btmtk_usb_setup(struct hci_dev *hdev)
> > break;
> > case 0x7922:
> > case 0x7925:
> > - /* Reset the device to ensure it's in the initial state before
> > - * downloading the firmware to ensure.
> > - */
> > -
> > - if (!test_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags))
> > - btmtk_usb_subsys_reset(hdev, dev_id);
> > - fallthrough;
> > case 0x7961:
> > btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
> > fw_version, fw_flavor);
> > @@ -1345,12 +1338,9 @@ int btmtk_usb_setup(struct hci_dev *hdev)
> > btmtk_usb_hci_wmt_sync);
> > if (err < 0) {
> > bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
> > - clear_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags);
> > return err;
> > }
> >
> > - set_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags);
> > -
> > /* It's Device EndPoint Reset Option Register */
> > err = btmtk_usb_uhw_reg_write(hdev, MTK_EP_RST_OPT,
> > MTK_EP_RST_IN_OUT_OPT);
> > --
> > 2.45.0
> >
> >
> >
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 687b2bae0efff9b25e071737d6af5004e6e35af5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051212-safeness-barista-b429@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 687b2bae0efff9b25e071737d6af5004e6e35af5 Mon Sep 17 00:00:00 2001
From: Jens Axboe <axboe(a)kernel.dk>
Date: Wed, 7 May 2025 07:34:24 -0600
Subject: [PATCH] io_uring: ensure deferred completions are flushed for
multishot
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable(a)vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer(a)apple.com>
Reported-by: Christian Mazakas <christian.mazakas(a)gmail.com>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 769814d71153..541e65a1eebf 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -848,6 +848,14 @@ bool io_req_post_cqe(struct io_kiocb *req, s32 res, u32 cflags)
struct io_ring_ctx *ctx = req->ctx;
bool posted;
+ /*
+ * If multishot has already posted deferred completions, ensure that
+ * those are flushed first before posting this one. If not, CQEs
+ * could get reordered.
+ */
+ if (!wq_list_empty(&ctx->submit_state.compl_reqs))
+ __io_submit_flush_completions(ctx);
+
lockdep_assert(!io_wq_current_is_worker());
lockdep_assert_held(&ctx->uring_lock);
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs. On platforms without fixed-range MTRRs,
accessing these MSRs will trigger unchecked MSR access error. Make
sure fixed-range MTRRs are supported before access to prevent such
error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges()
is unnecessary.
Fixes: 3ebad5905609 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Cc: stable(a)vger.kernel.org
Signed-off-by: Jiaqing Zhao <jiaqing.zhao(a)linux.intel.com>
---
v2:
* Removed unnecessary boot_cpu_has(X86_FEATURE_MTRR) check.
* Updated commit message.
Link: https://lore.kernel.org/all/20250509085612.2236222-2-jiaqing.zhao@linux.int…
arch/x86/kernel/cpu/mtrr/generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index e2c6b471d230..8c18327eb10b 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -593,7 +593,7 @@ static void get_fixed_ranges(mtrr_type *frs)
void mtrr_save_fixed_ranges(void *info)
{
- if (boot_cpu_has(X86_FEATURE_MTRR))
+ if (mtrr_state.have_fixed)
get_fixed_ranges(mtrr_state.fixed_ranges);
}
--
2.43.0
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 9f657a92805cfc98e11cf5da9e8f4e02ecff2260
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051247-swarm-drinking-a5ff@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 9f657a92805cfc98e11cf5da9e8f4e02ecff2260 Mon Sep 17 00:00:00 2001
From: Lukasz Czechowski <lukasz.czechowski(a)thaumatec.com>
Date: Fri, 25 Apr 2025 17:18:06 +0200
Subject: [PATCH] usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
The Cypress HX3 USB3.0 hubs use different PID values depending
on the product variant. The comment in compatibles table is
misleading, as the currently used PIDs (0x6504 and 0x6506 for
USB 3.0 and USB 2.0, respectively) are defaults for the CYUSB331x,
while CYUSB330x and CYUSB332x variants use different values.
Based on the datasheet [1], update the compatible usb devices table
to handle different types of the hub.
The change also includes vendor mode PIDs, which are used by the
hub in I2C Master boot mode, if connected EEPROM contains invalid
signature or is blank. This allows to correctly boot the hub even
if the EEPROM will have broken content.
Number of vcc supplies and timing requirements are the same for all
HX variants, so the platform driver's match table does not have to
be extended.
[1] https://www.infineon.com/dgdl/Infineon-HX3_USB_3_0_Hub_Consumer_Industrial-…
Table 9. PID Values
Fixes: b43cd82a1a40 ("usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family")
Cc: stable <stable(a)kernel.org>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski(a)thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-1-4a76a474a010@thauma…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
index 75ac3c6aa92d..f5372dfa241a 100644
--- a/drivers/usb/misc/onboard_usb_dev.c
+++ b/drivers/usb/misc/onboard_usb_dev.c
@@ -569,8 +569,14 @@ static void onboard_dev_usbdev_disconnect(struct usb_device *udev)
}
static const struct usb_device_id onboard_dev_id_table[] = {
- { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 HUB */
- { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 HUB */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6500) }, /* CYUSB330x 3.0 HUB */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6502) }, /* CYUSB330x 2.0 HUB */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6503) }, /* CYUSB33{0,1}x 2.0 HUB, Vendor Mode */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB331x 3.0 HUB */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB331x 2.0 HUB */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6507) }, /* CYUSB332x 2.0 HUB, Vendor Mode */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6508) }, /* CYUSB332x 3.0 HUB */
+ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x650a) }, /* CYUSB332x 2.0 HUB */
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6570) }, /* CY7C6563x 2.0 HUB */
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 HUB */
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 HUB */
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 2372f1caeca433c4c01c2482f73fbe057f5168ce
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051215-spiffy-repost-d6d8@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2372f1caeca433c4c01c2482f73fbe057f5168ce Mon Sep 17 00:00:00 2001
From: Prashanth K <prashanth.k(a)oss.qualcomm.com>
Date: Tue, 22 Apr 2025 16:02:31 +0530
Subject: [PATCH] usb: dwc3: gadget: Make gadget_wakeup asynchronous
Currently gadget_wakeup() waits for U0 synchronously if it was
called from func_wakeup(), this is because we need to send the
function wakeup command soon after the link is active. And the
call is made synchronous by polling DSTS continuosly for 20000
times in __dwc3_gadget_wakeup(). But it observed that sometimes
the link is not active even after polling 20K times, leading to
remote wakeup failures. Adding a small delay between each poll
helps, but that won't guarantee resolution in future. Hence make
the gadget_wakeup completely asynchronous.
Since multiple interfaces can issue a function wakeup at once,
add a new variable wakeup_pending_funcs which will indicate the
functions that has issued func_wakup, this is represented in a
bitmap format. If the link is in U3, dwc3_gadget_func_wakeup()
will set the bit corresponding to interface_id and bail out.
Once link comes back to U0, linksts_change irq is triggered,
where the function wakeup command is sent based on bitmap.
Cc: stable <stable(a)kernel.org>
Fixes: 92c08a84b53e ("usb: dwc3: Add function suspend and function wakeup support")
Signed-off-by: Prashanth K <prashanth.k(a)oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-4-prashanth.k@oss.qualcomm…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index aaa39e663f60..27eae4cf223d 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1164,6 +1164,9 @@ struct dwc3_scratchpad_array {
* @gsbuscfg0_reqinfo: store GSBUSCFG0.DATRDREQINFO, DESRDREQINFO,
* DATWRREQINFO, and DESWRREQINFO value passed from
* glue driver.
+ * @wakeup_pending_funcs: Indicates whether any interface has requested for
+ * function wakeup in bitmap format where bit position
+ * represents interface_id.
*/
struct dwc3 {
struct work_struct drd_work;
@@ -1394,6 +1397,7 @@ struct dwc3 {
int num_ep_resized;
struct dentry *debug_root;
u32 gsbuscfg0_reqinfo;
+ u32 wakeup_pending_funcs;
};
#define INCRX_BURST_MODE 0
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8c30d86cc4e3..321361288935 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -276,8 +276,6 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
return ret;
}
-static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async);
-
/**
* dwc3_send_gadget_ep_cmd - issue an endpoint command
* @dep: the endpoint to which the command is going to be issued
@@ -2359,10 +2357,8 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g)
return __dwc3_gadget_get_frame(dwc);
}
-static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async)
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
{
- int retries;
-
int ret;
u32 reg;
@@ -2390,8 +2386,7 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async)
return -EINVAL;
}
- if (async)
- dwc3_gadget_enable_linksts_evts(dwc, true);
+ dwc3_gadget_enable_linksts_evts(dwc, true);
ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
if (ret < 0) {
@@ -2410,27 +2405,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async)
/*
* Since link status change events are enabled we will receive
- * an U0 event when wakeup is successful. So bail out.
+ * an U0 event when wakeup is successful.
*/
- if (async)
- return 0;
-
- /* poll until Link State changes to ON */
- retries = 20000;
-
- while (retries--) {
- reg = dwc3_readl(dwc->regs, DWC3_DSTS);
-
- /* in HS, means ON */
- if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
- break;
- }
-
- if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
- dev_err(dwc->dev, "failed to send remote wakeup\n");
- return -EINVAL;
- }
-
return 0;
}
@@ -2451,7 +2427,7 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
spin_unlock_irqrestore(&dwc->lock, flags);
return -EINVAL;
}
- ret = __dwc3_gadget_wakeup(dwc, true);
+ ret = __dwc3_gadget_wakeup(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -2479,14 +2455,10 @@ static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
*/
link_state = dwc3_gadget_get_link_state(dwc);
if (link_state == DWC3_LINK_STATE_U3) {
- ret = __dwc3_gadget_wakeup(dwc, false);
- if (ret) {
- spin_unlock_irqrestore(&dwc->lock, flags);
- return -EINVAL;
- }
- dwc3_resume_gadget(dwc);
- dwc->suspended = false;
- dwc->link_state = DWC3_LINK_STATE_U0;
+ dwc->wakeup_pending_funcs |= BIT(intf_id);
+ ret = __dwc3_gadget_wakeup(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ return ret;
}
ret = dwc3_send_gadget_generic_command(dwc, DWC3_DGCMD_DEV_NOTIFICATION,
@@ -4353,6 +4325,8 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
{
enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
unsigned int pwropt;
+ int ret;
+ int intf_id;
/*
* WORKAROUND: DWC3 < 2.50a have an issue when configured without
@@ -4428,7 +4402,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
switch (next) {
case DWC3_LINK_STATE_U0:
- if (dwc->gadget->wakeup_armed) {
+ if (dwc->gadget->wakeup_armed || dwc->wakeup_pending_funcs) {
dwc3_gadget_enable_linksts_evts(dwc, false);
dwc3_resume_gadget(dwc);
dwc->suspended = false;
@@ -4451,6 +4425,18 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
}
dwc->link_state = next;
+
+ /* Proceed with func wakeup if any interfaces that has requested */
+ while (dwc->wakeup_pending_funcs && (next == DWC3_LINK_STATE_U0)) {
+ intf_id = ffs(dwc->wakeup_pending_funcs) - 1;
+ ret = dwc3_send_gadget_generic_command(dwc, DWC3_DGCMD_DEV_NOTIFICATION,
+ DWC3_DGCMDPAR_DN_FUNC_WAKE |
+ DWC3_DGCMDPAR_INTF_SEL(intf_id));
+ if (ret)
+ dev_err(dwc->dev, "Failed to send DN wake for intf %d\n", intf_id);
+
+ dwc->wakeup_pending_funcs &= ~BIT(intf_id);
+ }
}
static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x ffcd19e9f4cca0c8f9e23e88f968711acefbb37b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051255-frequency-concept-f9f5@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ffcd19e9f4cca0c8f9e23e88f968711acefbb37b Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Fri, 18 Apr 2025 11:17:14 -0500
Subject: [PATCH] iio: pressure: mprls0025pa: use aligned_s64 for timestamp
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure the struct itself it also 8-byte aligned.
While touching this, convert struct mpr_chan to an anonymous struct
to consolidate the code a bit to make it easier for future readers.
Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-2-d6a5d2b…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/pressure/mprls0025pa.h b/drivers/iio/pressure/mprls0025pa.h
index 9d5c30afa9d6..d62a018eaff3 100644
--- a/drivers/iio/pressure/mprls0025pa.h
+++ b/drivers/iio/pressure/mprls0025pa.h
@@ -34,16 +34,6 @@ struct iio_dev;
struct mpr_data;
struct mpr_ops;
-/**
- * struct mpr_chan
- * @pres: pressure value
- * @ts: timestamp
- */
-struct mpr_chan {
- s32 pres;
- s64 ts;
-};
-
enum mpr_func_id {
MPR_FUNCTION_A,
MPR_FUNCTION_B,
@@ -69,6 +59,8 @@ enum mpr_func_id {
* reading in a loop until data is ready
* @completion: handshake from irq to read
* @chan: channel values for buffered mode
+ * @chan.pres: pressure value
+ * @chan.ts: timestamp
* @buffer: raw conversion data
*/
struct mpr_data {
@@ -87,7 +79,10 @@ struct mpr_data {
struct gpio_desc *gpiod_reset;
int irq;
struct completion completion;
- struct mpr_chan chan;
+ struct {
+ s32 pres;
+ aligned_s64 ts;
+ } chan;
u8 buffer[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN);
};
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 6ffa698674053e82e811520642db2650d00d2c01
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051248-cabana-diaphragm-f579@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6ffa698674053e82e811520642db2650d00d2c01 Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:36 -0500
Subject: [PATCH] iio: chemical: pms7003: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c
index d0bd94912e0a..e05ce1f12065 100644
--- a/drivers/iio/chemical/pms7003.c
+++ b/drivers/iio/chemical/pms7003.c
@@ -5,7 +5,6 @@
* Copyright (c) Tomasz Duszynski <tduszyns(a)gmail.com>
*/
-#include <linux/unaligned.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/errno.h>
@@ -19,6 +18,8 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/serdev.h>
+#include <linux/types.h>
+#include <linux/unaligned.h>
#define PMS7003_DRIVER_NAME "pms7003"
@@ -76,7 +77,7 @@ struct pms7003_state {
/* Used to construct scan to push to the IIO buffer */
struct {
u16 data[3]; /* PM1, PM2P5, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
};
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x bb49d940344bcb8e2b19e69d7ac86f567887ea9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051235-quit-circus-c6e7@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bb49d940344bcb8e2b19e69d7ac86f567887ea9a Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:37 -0500
Subject: [PATCH] iio: chemical: sps30: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 6f4f2ba2c09d..a7888146188d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -108,7 +108,7 @@ static irqreturn_t sps30_trigger_handler(int irq, void *p)
int ret;
struct {
s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
mutex_lock(&state->lock);
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x bb49d940344bcb8e2b19e69d7ac86f567887ea9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051234-respect-outgrow-ba49@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bb49d940344bcb8e2b19e69d7ac86f567887ea9a Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:37 -0500
Subject: [PATCH] iio: chemical: sps30: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 6f4f2ba2c09d..a7888146188d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -108,7 +108,7 @@ static irqreturn_t sps30_trigger_handler(int irq, void *p)
int ret;
struct {
s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
mutex_lock(&state->lock);
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x bb49d940344bcb8e2b19e69d7ac86f567887ea9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051234-swerve-tamer-8fde@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bb49d940344bcb8e2b19e69d7ac86f567887ea9a Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:37 -0500
Subject: [PATCH] iio: chemical: sps30: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 6f4f2ba2c09d..a7888146188d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -108,7 +108,7 @@ static irqreturn_t sps30_trigger_handler(int irq, void *p)
int ret;
struct {
s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
mutex_lock(&state->lock);
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x bb49d940344bcb8e2b19e69d7ac86f567887ea9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051233-captivity-mustard-1a5c@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bb49d940344bcb8e2b19e69d7ac86f567887ea9a Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:37 -0500
Subject: [PATCH] iio: chemical: sps30: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 6f4f2ba2c09d..a7888146188d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -108,7 +108,7 @@ static irqreturn_t sps30_trigger_handler(int irq, void *p)
int ret;
struct {
s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
mutex_lock(&state->lock);
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x bb49d940344bcb8e2b19e69d7ac86f567887ea9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051233-catchy-scary-b2a5@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bb49d940344bcb8e2b19e69d7ac86f567887ea9a Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:37 -0500
Subject: [PATCH] iio: chemical: sps30: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 6f4f2ba2c09d..a7888146188d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -108,7 +108,7 @@ static irqreturn_t sps30_trigger_handler(int irq, void *p)
int ret;
struct {
s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
mutex_lock(&state->lock);
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x bb49d940344bcb8e2b19e69d7ac86f567887ea9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051232-trivial-handbook-ec4c@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bb49d940344bcb8e2b19e69d7ac86f567887ea9a Mon Sep 17 00:00:00 2001
From: David Lechner <dlechner(a)baylibre.com>
Date: Thu, 17 Apr 2025 11:52:37 -0500
Subject: [PATCH] iio: chemical: sps30: use aligned_s64 for timestamp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e…
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 6f4f2ba2c09d..a7888146188d 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -108,7 +108,7 @@ static irqreturn_t sps30_trigger_handler(int irq, void *p)
int ret;
struct {
s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
- s64 ts;
+ aligned_s64 ts;
} scan;
mutex_lock(&state->lock);
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 52d349884738c346961e153f195f4c7fe186fcf4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051216-wreath-barrier-759f@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 52d349884738c346961e153f195f4c7fe186fcf4 Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
Date: Sun, 13 Apr 2025 11:34:24 +0100
Subject: [PATCH] iio: adc: ad7266: Fix potential timestamp alignment issue.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On architectures where an s64 is only 32-bit aligned insufficient padding
would be left between the earlier elements and the timestamp. Use
aligned_s64 to enforce the correct placement and ensure the storage is
large enough.
Fixes: 54e018da3141 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer.
Reported-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Reviewed-by: David Lechner <dlechner(a)baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index 18559757f908..7fef2727f89e 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -45,7 +45,7 @@ struct ad7266_state {
*/
struct {
__be16 sample[2];
- s64 timestamp;
+ aligned_s64 timestamp;
} data __aligned(IIO_DMA_MINALIGN);
};
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 52d349884738c346961e153f195f4c7fe186fcf4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051215-doorstop-corporate-98dc@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 52d349884738c346961e153f195f4c7fe186fcf4 Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
Date: Sun, 13 Apr 2025 11:34:24 +0100
Subject: [PATCH] iio: adc: ad7266: Fix potential timestamp alignment issue.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On architectures where an s64 is only 32-bit aligned insufficient padding
would be left between the earlier elements and the timestamp. Use
aligned_s64 to enforce the correct placement and ensure the storage is
large enough.
Fixes: 54e018da3141 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer.
Reported-by: David Lechner <dlechner(a)baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa(a)analog.com>
Reviewed-by: David Lechner <dlechner(a)baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org
Cc: <Stable(a)vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index 18559757f908..7fef2727f89e 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -45,7 +45,7 @@ struct ad7266_state {
*/
struct {
__be16 sample[2];
- s64 timestamp;
+ aligned_s64 timestamp;
} data __aligned(IIO_DMA_MINALIGN);
};