May 2025 - Linux-stable-mirror

[PATCH] mm/hugetlb: fix a deadlock with pagecache_folio and hugetlb_fault_mutex_table

by Gavin Guo

The patch fixes a deadlock which can be triggered by an internal syzkaller [1] reproducer and captured by bpftrace script [2] and its log [3] in this scenario: Process 1 Process 2 --- --- hugetlb_fault mutex_lock(B) // take B filemap_lock_hugetlb_folio filemap_lock_folio __filemap_get_folio folio_lock(A) // take A hugetlb_wp mutex_unlock(B) // release B ... hugetlb_fault ... mutex_lock(B) // take B filemap_lock_hugetlb_folio filemap_lock_folio __filemap_get_folio folio_lock(A) // blocked unmap_ref_private ... mutex_lock(B) // retake and blocked This is a ABBA deadlock involving two locks: - Lock A: pagecache_folio lock - Lock B: hugetlb_fault_mutex_table lock The deadlock occurs between two processes as follows: 1. The first process (let’s call it Process 1) is handling a copy-on-write (COW) operation on a hugepage via hugetlb_wp. Due to insufficient reserved hugetlb pages, Process 1, owner of the reserved hugetlb page, attempts to unmap a hugepage owned by another process (non-owner) to satisfy the reservation. Before unmapping, Process 1 acquires lock B (hugetlb_fault_mutex_table lock) and then lock A (pagecache_folio lock). To proceed with the unmap, it releases Lock B but retains Lock A. After the unmap, Process 1 tries to reacquire Lock B. However, at this point, Lock B has already been acquired by another process. 2. The second process (Process 2) enters the hugetlb_fault handler during the unmap operation. It successfully acquires Lock B (hugetlb_fault_mutex_table lock) that was just released by Process 1, but then attempts to acquire Lock A (pagecache_folio lock), which is still held by Process 1. As a result, Process 1 (holding Lock A) is blocked waiting for Lock B (held by Process 2), while Process 2 (holding Lock B) is blocked waiting for Lock A (held by Process 1), constructing a ABBA deadlock scenario. The solution here is to unlock the pagecache_folio and provide the pagecache_folio_unlocked variable to the caller to have the visibility over the pagecache_folio status for subsequent handling. The error message: INFO: task repro_20250402_:13229 blocked for more than 64 seconds. Not tainted 6.15.0-rc3+ #24 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro_20250402_ state:D stack:25856 pid:13229 tgid:13228 ppid:3513 task_flags:0x400040 flags:0x00004006 Call Trace: <TASK> __schedule+0x1755/0x4f50 schedule+0x158/0x330 schedule_preempt_disabled+0x15/0x30 __mutex_lock+0x75f/0xeb0 hugetlb_wp+0xf88/0x3440 hugetlb_fault+0x14c8/0x2c30 trace_clock_x86_tsc+0x20/0x20 do_user_addr_fault+0x61d/0x1490 exc_page_fault+0x64/0x100 asm_exc_page_fault+0x26/0x30 RIP: 0010:__put_user_4+0xd/0x20 copy_process+0x1f4a/0x3d60 kernel_clone+0x210/0x8f0 __x64_sys_clone+0x18d/0x1f0 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x41b26d </TASK> INFO: task repro_20250402_:13229 is blocked on a mutex likely owned by task repro_20250402_:13250. task:repro_20250402_ state:D stack:28288 pid:13250 tgid:13228 ppid:3513 task_flags:0x400040 flags:0x00000006 Call Trace: <TASK> __schedule+0x1755/0x4f50 schedule+0x158/0x330 io_schedule+0x92/0x110 folio_wait_bit_common+0x69a/0xba0 __filemap_get_folio+0x154/0xb70 hugetlb_fault+0xa50/0x2c30 trace_clock_x86_tsc+0x20/0x20 do_user_addr_fault+0xace/0x1490 exc_page_fault+0x64/0x100 asm_exc_page_fault+0x26/0x30 RIP: 0033:0x402619 </TASK> INFO: task repro_20250402_:13250 blocked for more than 65 seconds. Not tainted 6.15.0-rc3+ #24 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro_20250402_ state:D stack:28288 pid:13250 tgid:13228 ppid:3513 task_flags:0x400040 flags:0x00000006 Call Trace: <TASK> __schedule+0x1755/0x4f50 schedule+0x158/0x330 io_schedule+0x92/0x110 folio_wait_bit_common+0x69a/0xba0 __filemap_get_folio+0x154/0xb70 hugetlb_fault+0xa50/0x2c30 trace_clock_x86_tsc+0x20/0x20 do_user_addr_fault+0xace/0x1490 exc_page_fault+0x64/0x100 asm_exc_page_fault+0x26/0x30 RIP: 0033:0x402619 </TASK> Showing all locks held in the system: 1 lock held by khungtaskd/35: #0: ffffffff879a7440 (rcu_read_lock){....}-{1:3}, at: debug_show_all_locks+0x30/0x180 2 locks held by repro_20250402_/13229: #0: ffff888017d801e0 (&mm->mmap_lock){++++}-{4:4}, at: lock_mm_and_find_vma+0x37/0x300 #1: ffff888000fec848 (&hugetlb_fault_mutex_table[i]){+.+.}-{4:4}, at: hugetlb_wp+0xf88/0x3440 3 locks held by repro_20250402_/13250: #0: ffff8880177f3d08 (vm_lock){++++}-{0:0}, at: do_user_addr_fault+0x41b/0x1490 #1: ffff888000fec848 (&hugetlb_fault_mutex_table[i]){+.+.}-{4:4}, at: hugetlb_fault+0x3b8/0x2c30 #2: ffff8880129500e8 (&resv_map->rw_sema){++++}-{4:4}, at: hugetlb_fault+0x494/0x2c30 Link: https://drive.google.com/file/d/1DVRnIW-vSayU5J1re9Ct_br3jJQU6Vpb/view?usp=… [1] Link: https://github.com/bboymimi/bpftracer/blob/master/scripts/hugetlb_lock_debu… [2] Link: https://drive.google.com/file/d/1bWq2-8o-BJAuhoHWX7zAhI6ggfhVzQUI/view?usp=… [3] Fixes: 40549ba8f8e0 ("hugetlb: use new vma_lock for pmd sharing synchronization") Cc: <stable(a)vger.kernel.org> Cc: Hugh Dickins <hughd(a)google.com> Cc: Florent Revest <revest(a)google.com> Cc: Gavin Shan <gshan(a)redhat.com> Signed-off-by: Gavin Guo <gavinguo(a)igalia.com> --- mm/hugetlb.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e3e6ac991b9c..ad54a74aa563 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -6115,7 +6115,8 @@ static void unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, * Keep the pte_same checks anyway to make transition from the mutex easier. */ static vm_fault_t hugetlb_wp(struct folio *pagecache_folio, - struct vm_fault *vmf) + struct vm_fault *vmf, + bool *pagecache_folio_unlocked) { struct vm_area_struct *vma = vmf->vma; struct mm_struct *mm = vma->vm_mm; @@ -6212,6 +6213,22 @@ static vm_fault_t hugetlb_wp(struct folio *pagecache_folio, u32 hash; folio_put(old_folio); + /* + * The pagecache_folio needs to be unlocked to avoid + * deadlock and we won't re-lock it in hugetlb_wp(). The + * pagecache_folio could be truncated after being + * unlocked. So its state should not be relied + * subsequently. + * + * Setting *pagecache_folio_unlocked to true allows the + * caller to handle any necessary logic related to the + * folio's unlocked state. + */ + if (pagecache_folio) { + folio_unlock(pagecache_folio); + if (pagecache_folio_unlocked) + *pagecache_folio_unlocked = true; + } /* * Drop hugetlb_fault_mutex and vma_lock before * unmapping. unmapping needs to hold vma_lock @@ -6566,7 +6583,7 @@ static vm_fault_t hugetlb_no_page(struct address_space *mapping, hugetlb_count_add(pages_per_huge_page(h), mm); if ((vmf->flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED)) { /* Optimization, do the COW without a second fault */ - ret = hugetlb_wp(folio, vmf); + ret = hugetlb_wp(folio, vmf, NULL); } spin_unlock(vmf->ptl); @@ -6638,6 +6655,7 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, struct hstate *h = hstate_vma(vma); struct address_space *mapping; int need_wait_lock = 0; + bool pagecache_folio_unlocked = false; struct vm_fault vmf = { .vma = vma, .address = address & huge_page_mask(h), @@ -6792,7 +6810,8 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, if (flags & (FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE)) { if (!huge_pte_write(vmf.orig_pte)) { - ret = hugetlb_wp(pagecache_folio, &vmf); + ret = hugetlb_wp(pagecache_folio, &vmf, + &pagecache_folio_unlocked); goto out_put_page; } else if (likely(flags & FAULT_FLAG_WRITE)) { vmf.orig_pte = huge_pte_mkdirty(vmf.orig_pte); @@ -6809,10 +6828,14 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, out_ptl: spin_unlock(vmf.ptl); - if (pagecache_folio) { + /* + * If the pagecache_folio is unlocked in hugetlb_wp(), we skip + * folio_unlock() here. + */ + if (pagecache_folio && !pagecache_folio_unlocked) folio_unlock(pagecache_folio); + if (pagecache_folio) folio_put(pagecache_folio); - } out_mutex: hugetlb_vma_unlock_read(vma); base-commit: d76bb1ebb5587f66b0f8b8099bfbb44722bc08b3 -- 2.43.0

1 month

5
13
0 0

Re: [PATCH v2] virtio_blk: Fix disk deletion hang on device surprise removal

by Michael S. Tsirkin

On Mon, May 26, 2025 at 02:40:33PM +0000, Parav Pandit wrote: > When the PCI device is surprise-removed, requests may not complete on > the device as the VQ is marked as broken. As a result, disk deletion > hangs. > > Fix it by aborting the requests when the VQ is broken. > > With this fix now fio completes swiftly. > An alternative of IO timeout has been considered, however > when the driver knows about unresponsive block device, swiftly clearing > them enables users and upper layers to react quickly. > > Verified with multiple device unplug iterations with pending requests in > virtio used ring and some pending with the device. > > Fixes: 43bb40c5b926 ("virtio_pci: Support surprise removal of virtio pci device") > Cc: stable(a)vger.kernel.org > Reported-by: Li RongQing <lirongqing(a)baidu.com> > Closes: https://lore.kernel.org/virtualization/c45dd68698cd47238c55fb73ca9b4741@bai… > Reviewed-by: Max Gurtovoy <mgurtovoy(a)nvidia.com> > Reviewed-by: Israel Rukshin <israelr(a)nvidia.com> > Signed-off-by: Parav Pandit <parav(a)nvidia.com> Thanks! I like the patch. Yes something to improve: > --- > v1->v2: > - Addressed comments from Stephan > - fixed spelling to 'waiting' > - Addressed comments from Michael > - Dropped checking broken vq from queue_rq() and queue_rqs() > because it is checked in lower layer routines in virtio core > > v0->v1: > - Fixed comments from Stefan to rename a cleanup function > - Improved logic for handling any outstanding requests > in bio layer > - improved cancel callback to sync with ongoing done() > --- > drivers/block/virtio_blk.c | 83 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 83 insertions(+) > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c > index 7cffea01d868..12f31e6c00cb 100644 > --- a/drivers/block/virtio_blk.c > +++ b/drivers/block/virtio_blk.c > @@ -1554,6 +1554,87 @@ static int virtblk_probe(struct virtio_device *vdev) > return err; > } > > +static bool virtblk_request_cancel(struct request *rq, void *data) > +{ > + struct virtblk_req *vbr = blk_mq_rq_to_pdu(rq); > + struct virtio_blk *vblk = data; > + struct virtio_blk_vq *vq; > + unsigned long flags; > + > + vq = &vblk->vqs[rq->mq_hctx->queue_num]; > + > + spin_lock_irqsave(&vq->lock, flags); > + > + vbr->in_hdr.status = VIRTIO_BLK_S_IOERR; My undertanding is that this is only safe to call when device is not accessing the vq anymore? Right? otherwise device can overwrite the status? But I am not sure I understand what guarantees this. Is there an assumption here that if vq is broken and we are on remove path then device is already gone? It seems to hold but I'd prefer something that makes this guarantee at the API level. > + if (blk_mq_request_started(rq) && !blk_mq_request_completed(rq)) > + blk_mq_complete_request(rq); > + > + spin_unlock_irqrestore(&vq->lock, flags); > + return true; > +} > + > +static void virtblk_broken_device_cleanup(struct virtio_blk *vblk) > +{ > + struct request_queue *q = vblk->disk->queue; > + > + if (!virtqueue_is_broken(vblk->vqs[0].vq)) > + return; can marking vqs broken be in progress such that 0 is already broken but another one is not, yet? if not pls add a comment explainging why. > + > + /* Start freezing the queue, so that new requests keeps waiting at the > + * door of bio_queue_enter(). We cannot fully freeze the queue because > + * freezed queue is an empty queue and there are pending requests, so > + * only start freezing it. > + */ > + blk_freeze_queue_start(q); > + > + /* When quiescing completes, all ongoing dispatches have completed > + * and no new dispatch will happen towards the driver. > + * This ensures that later when cancel is attempted, then are not > + * getting processed by the queue_rq() or queue_rqs() handlers. > + */ > + blk_mq_quiesce_queue(q); > + > + /* > + * Synchronize with any ongoing VQ callbacks, effectively quiescing > + * the device and preventing it from completing further requests > + * to the block layer. Any outstanding, incomplete requests will be > + * completed by virtblk_request_cancel(). I think what you really mean is: finish processing in callbacks, that might have started before vqs were marked as broken. > + */ > + virtio_synchronize_cbs(vblk->vdev); > + > + /* At this point, no new requests can enter the queue_rq() and > + * completion routine will not complete any new requests either for the > + * broken vq. Hence, it is safe to cancel all requests which are > + * started. > + */ > + blk_mq_tagset_busy_iter(&vblk->tag_set, virtblk_request_cancel, vblk); > + blk_mq_tagset_wait_completed_request(&vblk->tag_set); > + > + /* All pending requests are cleaned up. Time to resume so that disk > + * deletion can be smooth. Start the HW queues so that when queue is > + * unquiesced requests can again enter the driver. > + */ > + blk_mq_start_stopped_hw_queues(q, true); > + > + /* Unquiescing will trigger dispatching any pending requests to the > + * driver which has crossed bio_queue_enter() to the driver. > + */ > + blk_mq_unquiesce_queue(q); > + > + /* Wait for all pending dispatches to terminate which may have been > + * initiated after unquiescing. > + */ > + blk_mq_freeze_queue_wait(q); > + > + /* Mark the disk dead so that once queue unfreeze, the requests > + * waiting at the door of bio_queue_enter() can be aborted right away. > + */ > + blk_mark_disk_dead(vblk->disk); > + > + /* Unfreeze the queue so that any waiting requests will be aborted. */ > + blk_mq_unfreeze_queue_nomemrestore(q); > +} > + > static void virtblk_remove(struct virtio_device *vdev) > { > struct virtio_blk *vblk = vdev->priv; > @@ -1561,6 +1642,8 @@ static void virtblk_remove(struct virtio_device *vdev) > /* Make sure no work handler is accessing the device. */ > flush_work(&vblk->config_work); > > + virtblk_broken_device_cleanup(vblk); > + > del_gendisk(vblk->disk); > blk_mq_free_tag_set(&vblk->tag_set); > > -- > 2.34.1

1 month

2
2
0 0

[PATCH] drm/amd/display: Add null pointer check for get_first_active_display()

by Wentao Liang

The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Cc: stable(a)vger.kernel.org # v5.8 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c index 8c137d7c032e..e58e7b93810b 100644 --- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c +++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c @@ -368,6 +368,9 @@ enum mod_hdcp_status mod_hdcp_hdcp1_enable_encryption(struct mod_hdcp *hdcp) struct mod_hdcp_display *display = get_first_active_display(hdcp); enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS; + if (!display) + return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND; + mutex_lock(&psp->hdcp_context.mutex); hdcp_cmd = (struct ta_hdcp_shared_memory *)psp->hdcp_context.context.mem_context.shared_buf; memset(hdcp_cmd, 0, sizeof(struct ta_hdcp_shared_memory)); -- 2.42.0.windows.2

1 month

2
1
0 0

[PATCH AUTOSEL 5.4 1/2] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 80929380ec7e3..04ccfdd99e277 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -102,7 +102,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -450,7 +454,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -474,6 +478,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -511,6 +527,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
1
0 0

[PATCH AUTOSEL 5.10 1/2] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 80929380ec7e3..04ccfdd99e277 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -102,7 +102,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -450,7 +454,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -474,6 +478,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -511,6 +527,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
1
0 0

[PATCH AUTOSEL 5.15 1/2] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 80929380ec7e3..04ccfdd99e277 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -102,7 +102,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -450,7 +454,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -474,6 +478,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -511,6 +527,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
1
0 0

[PATCH AUTOSEL 6.1 1/3] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index b543d117b12c7..259eb2a2858f8 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -102,7 +102,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -450,7 +454,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -474,6 +478,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -511,6 +527,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
2
0 0

[PATCH AUTOSEL 6.6 1/4] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 085e044e888e4..d7ef4f046d99b 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -102,7 +102,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -450,7 +454,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -474,6 +478,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -511,6 +527,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
3
0 0

[PATCH AUTOSEL 6.12 1/5] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index ae992ac1ab4ac..6d5300c54a421 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -107,7 +107,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -560,7 +564,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -584,6 +588,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -621,6 +637,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
4
0 0

[PATCH AUTOSEL 6.14 1/5] platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys

by Sasha Levin

From: Valtteri Koskivuori <vkoskiv(a)gmail.com> [ Upstream commit a7e255ff9fe4d9b8b902023aaf5b7a673786bb50 ] The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv(a)gmail.com> Acked-by: Jonathan Woithe <jwoithe(a)just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/platform/x86/fujitsu-laptop.c | 33 +++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index a0eae24ca9e60..162809140f68a 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -17,13 +17,13 @@ /* * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional * features made available on a range of Fujitsu laptops including the - * P2xxx/P5xxx/S6xxx/S7xxx series. + * P2xxx/P5xxx/S2xxx/S6xxx/S7xxx series. * * This driver implements a vendor-specific backlight control interface for * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu * laptops. * - * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and + * This driver has been tested on a Fujitsu Lifebook S2110, S6410, S7020 and * P8010. It should work on most P-series and S-series Lifebooks, but * YMMV. * @@ -107,7 +107,11 @@ #define KEY2_CODE 0x411 #define KEY3_CODE 0x412 #define KEY4_CODE 0x413 -#define KEY5_CODE 0x420 +#define KEY5_CODE 0x414 +#define KEY6_CODE 0x415 +#define KEY7_CODE 0x416 +#define KEY8_CODE 0x417 +#define KEY9_CODE 0x420 /* Hotkey ringbuffer limits */ #define MAX_HOTKEY_RINGBUFFER_SIZE 100 @@ -560,7 +564,7 @@ static const struct key_entry keymap_default[] = { { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, - { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, + { KE_KEY, KEY9_CODE, { KEY_RFKILL } }, /* Soft keys read from status flags */ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, @@ -584,6 +588,18 @@ static const struct key_entry keymap_p8010[] = { { KE_END, 0 } }; +static const struct key_entry keymap_s2110[] = { + { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, /* "A" */ + { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, /* "B" */ + { KE_KEY, KEY3_CODE, { KEY_WWW } }, /* "Internet" */ + { KE_KEY, KEY4_CODE, { KEY_EMAIL } }, /* "E-mail" */ + { KE_KEY, KEY5_CODE, { KEY_STOPCD } }, + { KE_KEY, KEY6_CODE, { KEY_PLAYPAUSE } }, + { KE_KEY, KEY7_CODE, { KEY_PREVIOUSSONG } }, + { KE_KEY, KEY8_CODE, { KEY_NEXTSONG } }, + { KE_END, 0 } +}; + static const struct key_entry *keymap = keymap_default; static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) @@ -621,6 +637,15 @@ static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { }, .driver_data = (void *)keymap_p8010 }, + { + .callback = fujitsu_laptop_dmi_keymap_override, + .ident = "Fujitsu LifeBook S2110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S2110"), + }, + .driver_data = (void *)keymap_s2110 + }, {} }; -- 2.39.5

1 month

1
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025