May 2025 - Linux-stable-mirror

[PATCH 4/4 v3] crypto: octeontx2: Fix address alignment on CN10KB and CN10KA-B0

by Bharat Bhushan

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size() Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment. This patch ensures all addresses are aligned as mentioned above. Signed-off-by: Bharat Bhushan <bbhushan2(a)marvell.com> Cc: <stable(a)vger.kernel.org> #v6.8+ --- v2->v3: - Align DMA memory to ARCH_DMA_MINALIGN as that is mapped as bidirectional v1->v2: - Fixed memory padding size calculation as per review comment .../marvell/octeontx2/otx2_cpt_reqmgr.h | 58 ++++++++++++++----- 1 file changed, 43 insertions(+), 15 deletions(-) diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index 204a31755710..8e95036e91d9 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -350,22 +350,47 @@ static inline struct otx2_cpt_inst_info * cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - u32 dlen = 0, g_len, sg_len, info_len; - int align = OTX2_CPT_DMA_MINALIGN; + u32 dlen = 0, g_len, s_len, sg_len, info_len; struct otx2_cpt_inst_info *info; - u16 g_sz_bytes, s_sz_bytes; u32 total_mem_len; int i; - g_sz_bytes = ((req->in_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ---------------------------------- + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | -----------------------------| + * | | padding for 8B alignment | + * |----------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |----------------------------------| + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | (padding for below alignment) | + * | -----------------------------| + * | | padding for 32B alignment | + * |----------------------------------| + * | Result response memory | + * ---------------------------------- + */ + + info_len = sizeof(*info); + + g_len = ((req->in_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + s_len = ((req->out_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + sg_len = g_len + s_len; - g_len = ALIGN(g_sz_bytes, align); - sg_len = ALIGN(g_len + s_sz_bytes, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = sg_len + info_len + sizeof(union otx2_cpt_res_s); + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, ARCH_DMA_MINALIGN) + sg_len; + total_mem_len = ALIGN(total_mem_len, OTX2_CPT_DPTR_RPTR_ALIGN); + total_mem_len += (OTX2_CPT_RES_ADDR_ALIGN - 1) & + ~(OTX2_CPT_DPTR_RPTR_ALIGN - 1); + total_mem_len += sizeof(union otx2_cpt_res_s); info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) @@ -375,7 +400,8 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, dlen += req->in[i].size; info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, ARCH_DMA_MINALIGN); + info->out_buffer = info->in_buffer + g_len; info->gthr_sz = req->in_cnt; info->sctr_sz = req->out_cnt; @@ -387,7 +413,7 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, } if (sgv2io_components_setup(pdev, req->out, req->out_cnt, - &info->in_buffer[g_len])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -404,8 +430,10 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + sg_len; - info->comp_baddr = info->dptr_baddr + sg_len; + info->completion_addr = PTR_ALIGN((info->in_buffer + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); return info; -- 2.34.1

7 months

1
0
0 0

Panic with a lis2dw12 accelerometer

by Maud Spierings

I've just experienced an Issue that I think may be a regression. I'm enabling a device which incorporates a lis2dw12 accelerometer, currently I am running 6.12 lts, so 6.12.29 as of typing this message. My first issue is a Panic: [ 0.281814] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 0.290626] Mem abort info: [ 0.293465] ESR = 0x0000000096000004 [ 0.297230] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.302558] SET = 0, FnV = 0 [ 0.305619] EA = 0, S1PTW = 0 [ 0.308766] FSC = 0x04: level 0 translation fault [ 0.313649] Data abort info: [ 0.316534] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.322032] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.327093] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.332413] [00000000000000c0] user address but active_mm is swapper [ 0.338774] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.345044] Modules linked in: [ 0.348106] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.12.28-00054-gf24728d836e5 #13 [ 0.356983] Hardware name: GOcontroll Moduline Mini (DT) [ 0.362297] Workqueue: events_unbound deferred_probe_work_func [ 0.368143] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.375109] pc : device_set_deferred_probe_reason+0x58/0x84 [ 0.380686] lr : device_set_deferred_probe_reason+0x50/0x84 [ 0.386262] sp : ffff8000816d34d0 [ 0.389577] x29: ffff8000816d34d0 x28: ffff000004099d08 x27: ffff0000040998f0 [ 0.396724] x26: 0000000030a40000 x25: ffff000004099be4 x24: ffff00003fdf2758 [ 0.403870] x23: 000000000000000f x22: ffff8000816d3508 x21: ffff000000260a20 [ 0.411017] x20: ffff00000409a808 x19: ffff800081299db8 x18: ffffffffffffffff [ 0.418163] x17: 00007fff7e57efff x16: ffff8000815ad000 x15: ffff0000002617da [ 0.425309] x14: 0000000000000001 x13: 0a7365696c707075 x12: 7320656c62616e65 [ 0.432454] x11: 0000000669b8cb4b x10: 0000000000000020 x9 : ffff8000816d3590 [ 0.439599] x8 : ffff8000816d3590 x7 : 0000000000000000 x6 : ffff800080fe16a6 [ 0.446745] x5 : ffff000000260a3f x4 : ffff800080fc3912 x3 : 0000000000000000 [ 0.453890] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000260a20 [ 0.461037] Call trace: [ 0.463485] device_set_deferred_probe_reason+0x58/0x84 [ 0.468715] dev_err_probe+0xa0/0xec [ 0.472296] st_sensors_power_enable+0x50/0x60 [ 0.476748] st_accel_i2c_probe+0x70/0xe0 [ 0.480763] i2c_device_probe+0xfc/0x2d8 [ 0.484692] really_probe+0xc0/0x394 [ 0.488271] __driver_probe_device+0x7c/0x14c [ 0.492631] driver_probe_device+0x3c/0x120 [ 0.496818] __device_attach_driver+0xbc/0x160 [ 0.501265] bus_for_each_drv+0x88/0xe8 [ 0.505108] __device_attach+0xa0/0x1b4 [ 0.508949] device_initial_probe+0x14/0x20 [ 0.513135] bus_probe_device+0xb0/0xbc [ 0.516974] device_add+0x594/0x7a4 [ 0.520469] device_register+0x20/0x3c [ 0.524224] i2c_new_client_device+0x19c/0x3d0 [ 0.528671] of_i2c_register_device+0xd4/0xfc [ 0.533033] of_i2c_register_devices+0x6c/0x140 [ 0.537568] i2c_register_adapter+0x1f4/0x728 [ 0.541929] __i2c_add_numbered_adapter+0x58/0xa8 [ 0.546637] i2c_add_adapter+0xa0/0xd0 [ 0.550389] i2c_add_numbered_adapter+0x2c/0x38 [ 0.554924] i2c_imx_probe+0x2b0/0x6d4 [ 0.558679] platform_probe+0x68/0xdc [ 0.562347] really_probe+0xc0/0x394 [ 0.565926] __driver_probe_device+0x7c/0x14c [ 0.570286] driver_probe_device+0x3c/0x120 [ 0.574473] __device_attach_driver+0xbc/0x160 [ 0.578920] bus_for_each_drv+0x88/0xe8 [ 0.582763] __device_attach+0xa0/0x1b4 [ 0.586602] device_initial_probe+0x14/0x20 [ 0.590790] bus_probe_device+0xb0/0xbc [ 0.594628] deferred_probe_work_func+0xb8/0x11c [ 0.599250] process_one_work+0x180/0x2dc [ 0.603265] worker_thread+0x2c0/0x3e0 [ 0.607017] kthread+0x110/0x120 [ 0.610252] ret_from_fork+0x10/0x20 [ 0.613836] Code: 911a8021 97f9326d f9402681 aa0003f5 (f9406020) [ 0.619931] ---[ end trace 0000000000000000 ]--- [ 0.624551] Kernel panic - not syncing: Oops: Fatal exception [ 0.630299] SMP: stopping secondary CPUs [ 0.634543] Kernel Offset: disabled [ 0.638032] CPU features: 0x00,00000080,00200000,4200420b [ 0.643433] Memory Limit: none It seems that indio_dev->dev is not initialized in st_sensors_power_enable(), this causes an issue when devm_regulator_bulk_get_enable() fails and then calls dev_err_probe with an uninitialized device. To fix this I added: indio_dev->dev = client->dev; just before the call to st_sensors_power_enable() in drivers/iio/accel/st_accel_i2c.c This fixed the kernel panic but showed another issue: 0.440413] sysfs: cannot create duplicate filename '/devices/platform/soc(a)0/30800000.bus/30a40000.i2c/i2c-2/2-0018' [ 0.440422] CPU: 0 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.12.29+ #6 [ 0.440430] Hardware name: GOcontroll Moduline Mini (DT) [ 0.440435] Workqueue: events_unbound deferred_probe_work_func [ 0.440449] Call trace: [ 0.440452] dump_backtrace+0xd0/0x120 [ 0.440462] show_stack+0x18/0x24 [ 0.440469] dump_stack_lvl+0x60/0x80 [ 0.440478] dump_stack+0x18/0x24 [ 0.440483] sysfs_warn_dup+0x64/0x80 [ 0.440491] sysfs_create_dir_ns+0xf4/0x120 [ 0.440496] kobject_add_internal+0xb4/0x2d0 [ 0.440504] kobject_add+0x9c/0x108 [ 0.440511] device_add+0xb0/0x7a4 [ 0.440519] cdev_device_add+0x50/0xbc [ 0.440525] __iio_device_register+0x718/0x924 [ 0.440535] __devm_iio_device_register+0x28/0x8c [ 0.440542] st_accel_common_probe+0xd4/0xf0 [ 0.440550] st_accel_i2c_probe+0xa0/0xe0 [ 0.440556] i2c_device_probe+0xfc/0x2d8 [ 0.440563] really_probe+0xc0/0x394 [ 0.440568] __driver_probe_device+0x7c/0x14c [ 0.440573] driver_probe_device+0x3c/0x120 [ 0.440578] __device_attach_driver+0xbc/0x160 [ 0.440583] bus_for_each_drv+0x88/0xe8 [ 0.440590] __device_attach+0xa0/0x1b4 [ 0.440595] device_initial_probe+0x14/0x20 [ 0.440601] bus_probe_device+0xb0/0xbc [ 0.440605] deferred_probe_work_func+0xb8/0x11c [ 0.440610] process_one_work+0x180/0x2dc [ 0.440616] worker_thread+0x2c0/0x3e0 [ 0.440621] kthread+0x110/0x120 [ 0.440628] ret_from_fork+0x10/0x20 [ 0.440636] kobject: kobject_add_internal failed for 2-0018 with -EEXIST, don't try to register things with the same name in the same directory. [ 0.453688] st-accel-i2c 2-0018: probe with driver st-accel-i2c failed with error -17 In /sys/bus/i2c/devices I can indeed see 2-0018 present, but it doesn't show up on the iio bus (/sys/bus/iio/devices), so I am guessing somewhere in the driver it registers it before it should, and then again when it should. This is where my ability to fix thing fizzles out and so here I am asking for assistance. Kind regards, Maud

7 months

2
2
0 0

[PATCH] drm/xe/svm: Fix regression disallowing 64K SVM migration

by Maarten Lankhorst

When changing the condition from >= SZ_64K, it was changed to <= SZ_64K. This disallows migration of 64K, which is the exact minimum allowed. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5057 Fixes: a9ac0fa455b0 ("drm/xe: Strict migration policy for atomic SVM faults") Cc: stable(a)vger.kernel.org Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com> Signed-off-by: Maarten Lankhorst <dev(a)lankhorst.se> --- drivers/gpu/drm/xe/xe_svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_svm.c b/drivers/gpu/drm/xe/xe_svm.c index 4432685936ed4..a7386334d48c4 100644 --- a/drivers/gpu/drm/xe/xe_svm.c +++ b/drivers/gpu/drm/xe/xe_svm.c @@ -820,7 +820,7 @@ bool xe_svm_range_needs_migrate_to_vram(struct xe_svm_range *range, struct xe_vm return false; } - if (preferred_region_is_vram && range_size <= SZ_64K && !supports_4K_migration(vm->xe)) { + if (preferred_region_is_vram && range_size < SZ_64K && !supports_4K_migration(vm->xe)) { drm_warn(&vm->xe->drm, "Platform doesn't support SZ_4K range migration\n"); return false; } -- 2.45.2

7 months

2
1
0 0

[PATCH net] hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()

by Saurabh Sengar

The MANA driver's probe registers netdevice via the following call chain: mana_probe() register_netdev() register_netdevice() register_netdevice() calls notifier callback for netvsc driver, holding the netdev mutex via netdev_lock_ops(). Further this netvsc notifier callback end up attempting to acquire the same lock again in dev_xdp_propagate() leading to deadlock. netvsc_netdev_event() netvsc_vf_setxdp() dev_xdp_propagate() This deadlock was not observed so far because net_shaper_ops was never set and this lock in noop in this case. Fix this by using netif_xdp_propagate instead of dev_xdp_propagate to avoid recursive locking in this path. This issue has not observed so far because net_shaper_ops was unset, making the lock path effectively a no-op. To prevent recursive locking and avoid this deadlock, replace dev_xdp_propagate() with netif_xdp_propagate(), which does not acquire the lock again. Also, clean up the unregistration path by removing unnecessary call to netvsc_vf_setxdp(), since unregister_netdevice_many_notify() already performs this cleanup via dev_xdp_uninstall. Fixes: 97246d6d21c2 ("net: hold netdev instance lock during ndo_bpf") Cc: stable(a)vger.kernel.org Signed-off-by: Saurabh Sengar <ssengar(a)linux.microsoft.com> --- drivers/net/hyperv/netvsc_bpf.c | 2 +- drivers/net/hyperv/netvsc_drv.c | 2 -- net/core/dev.c | 1 + 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/hyperv/netvsc_bpf.c b/drivers/net/hyperv/netvsc_bpf.c index e01c5997a551..1dd3755d9e6d 100644 --- a/drivers/net/hyperv/netvsc_bpf.c +++ b/drivers/net/hyperv/netvsc_bpf.c @@ -183,7 +183,7 @@ int netvsc_vf_setxdp(struct net_device *vf_netdev, struct bpf_prog *prog) xdp.command = XDP_SETUP_PROG; xdp.prog = prog; - ret = dev_xdp_propagate(vf_netdev, &xdp); + ret = netif_xdp_propagate(vf_netdev, &xdp); if (ret && prog) bpf_prog_put(prog); diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index d8b169ac0343..ee3aaf9c10e6 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2462,8 +2462,6 @@ static int netvsc_unregister_vf(struct net_device *vf_netdev) netdev_info(ndev, "VF unregistering: %s\n", vf_netdev->name); - netvsc_vf_setxdp(vf_netdev, NULL); - reinit_completion(&net_device_ctx->vf_add); netdev_rx_handler_unregister(vf_netdev); netdev_upper_dev_unlink(vf_netdev, ndev); diff --git a/net/core/dev.c b/net/core/dev.c index fccf2167b235..8c6c9d7fba26 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -9953,6 +9953,7 @@ int netif_xdp_propagate(struct net_device *dev, struct netdev_bpf *bpf) return dev->netdev_ops->ndo_bpf(dev, bpf); } +EXPORT_SYMBOL_GPL(netif_xdp_propagate); u32 dev_xdp_prog_id(struct net_device *dev, enum bpf_xdp_mode mode) { -- 2.43.0

7 months

4
3
0 0

[PATCH v2] r8152: Add wake up function for RTL8153

by Wentao Liang

In rtl8153_runtime_enable(), the runtime enable/disable logic for RTL8153 devices was incomplete, missing r8153_queue_wake() to enable or disable the automatic wake-up function. A proper implementation can be found in rtl8156_runtime_enable(). Add r8153_queue_wake(tp, true) if enable flag is set true, and add r8153_queue_wake(tp, false) otherwise. Fixes: 02552754a7ac ("r8152: adjust rtl8153_runtime_enable function") Cc: stable(a)vger.kernel.org # v4.13 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 468c73974046..cb708b79a7af 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4004,10 +4004,12 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable) static void rtl8153_runtime_enable(struct r8152 *tp, bool enable) { if (enable) { + r8153_queue_wake(tp, true); r8153_u1u2en(tp, false); r8153_u2p3en(tp, false); rtl_runtime_suspend_enable(tp, true); } else { + r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); switch (tp->version) { -- 2.42.0.windows.2

7 months

3
2
0 0

[PATCH net 4/4] can: slcan: allow reception of short error messages

by Marc Kleine-Budde

From: Carlos Sanchez <carlossanchez(a)geotab.com> Allows slcan to receive short messages (typically errors) from the serial interface. When error support was added to slcan protocol in b32ff4668544e1333b694fcc7812b2d7397b4d6a ("can: slcan: extend the protocol with error info") the minimum valid message size changed from 5 (minimum standard can frame tIII0) to 3 ("e1a" is a valid protocol message, it is one of the examples given in the comments for slcan_bump_err() ), but the check for minimum message length prodicating all decoding was not adjusted. This makes short error messages discarded and error frames not being generated. This patch changes the minimum length to the new minimum (3 characters, excluding terminator, is now a valid message). Signed-off-by: Carlos Sanchez <carlossanchez(a)geotab.com> Fixes: b32ff4668544 ("can: slcan: extend the protocol with error info") Reviewed-by: Vincent Mailhol <mailhol.vincent(a)wanadoo.fr> Link: https://patch.msgid.link/20250520102305.1097494-1-carlossanchez@geotab.com Cc: stable(a)vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/slcan/slcan-core.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/net/can/slcan/slcan-core.c b/drivers/net/can/slcan/slcan-core.c index 24c6622d36bd..58ff2ec1d975 100644 --- a/drivers/net/can/slcan/slcan-core.c +++ b/drivers/net/can/slcan/slcan-core.c @@ -71,12 +71,21 @@ MODULE_AUTHOR("Dario Binacchi <dario.binacchi(a)amarulasolutions.com>"); #define SLCAN_CMD_LEN 1 #define SLCAN_SFF_ID_LEN 3 #define SLCAN_EFF_ID_LEN 8 +#define SLCAN_DATA_LENGTH_LEN 1 +#define SLCAN_ERROR_LEN 1 #define SLCAN_STATE_LEN 1 #define SLCAN_STATE_BE_RXCNT_LEN 3 #define SLCAN_STATE_BE_TXCNT_LEN 3 -#define SLCAN_STATE_FRAME_LEN (1 + SLCAN_CMD_LEN + \ - SLCAN_STATE_BE_RXCNT_LEN + \ - SLCAN_STATE_BE_TXCNT_LEN) +#define SLCAN_STATE_MSG_LEN (SLCAN_CMD_LEN + \ + SLCAN_STATE_LEN + \ + SLCAN_STATE_BE_RXCNT_LEN + \ + SLCAN_STATE_BE_TXCNT_LEN) +#define SLCAN_ERROR_MSG_LEN_MIN (SLCAN_CMD_LEN + \ + SLCAN_ERROR_LEN + \ + SLCAN_DATA_LENGTH_LEN) +#define SLCAN_FRAME_MSG_LEN_MIN (SLCAN_CMD_LEN + \ + SLCAN_SFF_ID_LEN + \ + SLCAN_DATA_LENGTH_LEN) struct slcan { struct can_priv can; @@ -176,6 +185,9 @@ static void slcan_bump_frame(struct slcan *sl) u32 tmpid; char *cmd = sl->rbuff; + if (sl->rcount < SLCAN_FRAME_MSG_LEN_MIN) + return; + skb = alloc_can_skb(sl->dev, &cf); if (unlikely(!skb)) { sl->dev->stats.rx_dropped++; @@ -281,7 +293,7 @@ static void slcan_bump_state(struct slcan *sl) return; } - if (state == sl->can.state || sl->rcount < SLCAN_STATE_FRAME_LEN) + if (state == sl->can.state || sl->rcount != SLCAN_STATE_MSG_LEN) return; cmd += SLCAN_STATE_BE_RXCNT_LEN + SLCAN_CMD_LEN + 1; @@ -328,6 +340,9 @@ static void slcan_bump_err(struct slcan *sl) bool rx_errors = false, tx_errors = false, rx_over_errors = false; int i, len; + if (sl->rcount < SLCAN_ERROR_MSG_LEN_MIN) + return; + /* get len from sanitized ASCII value */ len = cmd[1]; if (len >= '0' && len < '9') @@ -456,8 +471,7 @@ static void slcan_bump(struct slcan *sl) static void slcan_unesc(struct slcan *sl, unsigned char s) { if ((s == '\r') || (s == '\a')) { /* CR or BEL ends the pdu */ - if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && - sl->rcount > 4) + if (!test_and_clear_bit(SLF_ERROR, &sl->flags)) slcan_bump(sl); sl->rcount = 0; -- 2.47.2

7 months

1
0
0 0

[PATCH net 3/4] can: kvaser_pciefd: Continue parsing DMA buf after dropped RX

by Marc Kleine-Budde

From: Axel Forsman <axfo(a)kvaser.com> Going bus-off on a channel doing RX could result in dropped packets. As netif_running() gets cleared before the channel abort procedure, the handling of any last RDATA packets would see netif_rx() return non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt with this "error" by breaking out of processing the remaining DMA RX buffer. Only return an error from kvaser_pciefd_read_buffer() due to packet corruption, otherwise handle it internally. Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/kvaser_pciefd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index a61cbade96d9..f6921368cd14 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1209,7 +1209,7 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, skb = alloc_canfd_skb(priv->dev, &cf); if (!skb) { priv->dev->stats.rx_dropped++; - return -ENOMEM; + return 0; } cf->len = can_fd_dlc2len(dlc); @@ -1221,7 +1221,7 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, skb = alloc_can_skb(priv->dev, (struct can_frame **)&cf); if (!skb) { priv->dev->stats.rx_dropped++; - return -ENOMEM; + return 0; } can_frame_set_cc_len((struct can_frame *)cf, dlc, priv->ctrlmode); } @@ -1239,7 +1239,9 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, priv->dev->stats.rx_packets++; kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); - return netif_rx(skb); + netif_rx(skb); + + return 0; } static void kvaser_pciefd_change_state(struct kvaser_pciefd_can *can, -- 2.47.2

7 months

1
0
0 0

[PATCH net 2/4] can: kvaser_pciefd: Fix echo_skb race

by Marc Kleine-Budde

From: Axel Forsman <axfo(a)kvaser.com> The functions kvaser_pciefd_start_xmit() and kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented prior to handling of ACKs. E.g., this caused the following error: can_put_echo_skb: BUG! echo_skb 5 is occupied! Instead, use the synchronization helpers in netdev_queues.h. As those piggyback on BQL barriers, start updating in-flight packets and bytes counts as well. Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/kvaser_pciefd.c | 93 +++++++++++++++++++++------------ 1 file changed, 59 insertions(+), 34 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 9cc9176c2058..a61cbade96d9 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -16,6 +16,7 @@ #include <linux/netdevice.h> #include <linux/pci.h> #include <linux/timer.h> +#include <net/netdev_queues.h> MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Kvaser AB <support(a)kvaser.com>"); @@ -410,10 +411,13 @@ struct kvaser_pciefd_can { void __iomem *reg_base; struct can_berr_counter bec; u8 cmd_seq; + u8 tx_max_count; + u8 tx_idx; + u8 ack_idx; int err_rep_cnt; - int echo_idx; + unsigned int completed_tx_pkts; + unsigned int completed_tx_bytes; spinlock_t lock; /* Locks sensitive registers (e.g. MODE) */ - spinlock_t echo_lock; /* Locks the message echo buffer */ struct timer_list bec_poll_timer; struct completion start_comp, flush_comp; }; @@ -714,6 +718,9 @@ static int kvaser_pciefd_open(struct net_device *netdev) int ret; struct kvaser_pciefd_can *can = netdev_priv(netdev); + can->tx_idx = 0; + can->ack_idx = 0; + ret = open_candev(netdev); if (ret) return ret; @@ -745,21 +752,26 @@ static int kvaser_pciefd_stop(struct net_device *netdev) timer_delete(&can->bec_poll_timer); } can->can.state = CAN_STATE_STOPPED; + netdev_reset_queue(netdev); close_candev(netdev); return ret; } +static unsigned int kvaser_pciefd_tx_avail(const struct kvaser_pciefd_can *can) +{ + return can->tx_max_count - (READ_ONCE(can->tx_idx) - READ_ONCE(can->ack_idx)); +} + static int kvaser_pciefd_prepare_tx_packet(struct kvaser_pciefd_tx_packet *p, - struct kvaser_pciefd_can *can, + struct can_priv *can, u8 seq, struct sk_buff *skb) { struct canfd_frame *cf = (struct canfd_frame *)skb->data; int packet_size; - int seq = can->echo_idx; memset(p, 0, sizeof(*p)); - if (can->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) + if (can->ctrlmode & CAN_CTRLMODE_ONE_SHOT) p->header[1] |= KVASER_PCIEFD_TPACKET_SMS; if (cf->can_id & CAN_RTR_FLAG) @@ -782,7 +794,7 @@ static int kvaser_pciefd_prepare_tx_packet(struct kvaser_pciefd_tx_packet *p, } else { p->header[1] |= FIELD_PREP(KVASER_PCIEFD_RPACKET_DLC_MASK, - can_get_cc_dlc((struct can_frame *)cf, can->can.ctrlmode)); + can_get_cc_dlc((struct can_frame *)cf, can->ctrlmode)); } p->header[1] |= FIELD_PREP(KVASER_PCIEFD_PACKET_SEQ_MASK, seq); @@ -797,22 +809,24 @@ static netdev_tx_t kvaser_pciefd_start_xmit(struct sk_buff *skb, struct net_device *netdev) { struct kvaser_pciefd_can *can = netdev_priv(netdev); - unsigned long irq_flags; struct kvaser_pciefd_tx_packet packet; + unsigned int seq = can->tx_idx & (can->can.echo_skb_max - 1); + unsigned int frame_len; int nr_words; - u8 count; if (can_dev_dropped_skb(netdev, skb)) return NETDEV_TX_OK; + if (!netif_subqueue_maybe_stop(netdev, 0, kvaser_pciefd_tx_avail(can), 1, 1)) + return NETDEV_TX_BUSY; - nr_words = kvaser_pciefd_prepare_tx_packet(&packet, can, skb); + nr_words = kvaser_pciefd_prepare_tx_packet(&packet, &can->can, seq, skb); - spin_lock_irqsave(&can->echo_lock, irq_flags); /* Prepare and save echo skb in internal slot */ - can_put_echo_skb(skb, netdev, can->echo_idx, 0); - - /* Move echo index to the next slot */ - can->echo_idx = (can->echo_idx + 1) % can->can.echo_skb_max; + WRITE_ONCE(can->can.echo_skb[seq], NULL); + frame_len = can_skb_get_frame_len(skb); + can_put_echo_skb(skb, netdev, seq, frame_len); + netdev_sent_queue(netdev, frame_len); + WRITE_ONCE(can->tx_idx, can->tx_idx + 1); /* Write header to fifo */ iowrite32(packet.header[0], @@ -836,14 +850,7 @@ static netdev_tx_t kvaser_pciefd_start_xmit(struct sk_buff *skb, KVASER_PCIEFD_KCAN_FIFO_LAST_REG); } - count = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_CURRENT_MASK, - ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); - /* No room for a new message, stop the queue until at least one - * successful transmit - */ - if (count >= can->can.echo_skb_max || can->can.echo_skb[can->echo_idx]) - netif_stop_queue(netdev); - spin_unlock_irqrestore(&can->echo_lock, irq_flags); + netif_subqueue_maybe_stop(netdev, 0, kvaser_pciefd_tx_avail(can), 1, 1); return NETDEV_TX_OK; } @@ -970,6 +977,8 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) can->kv_pcie = pcie; can->cmd_seq = 0; can->err_rep_cnt = 0; + can->completed_tx_pkts = 0; + can->completed_tx_bytes = 0; can->bec.txerr = 0; can->bec.rxerr = 0; @@ -983,11 +992,10 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) tx_nr_packets_max = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_MAX_MASK, ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); + can->tx_max_count = min(KVASER_PCIEFD_CAN_TX_MAX_COUNT, tx_nr_packets_max - 1); can->can.clock.freq = pcie->freq; - can->can.echo_skb_max = min(KVASER_PCIEFD_CAN_TX_MAX_COUNT, tx_nr_packets_max - 1); - can->echo_idx = 0; - spin_lock_init(&can->echo_lock); + can->can.echo_skb_max = roundup_pow_of_two(can->tx_max_count); spin_lock_init(&can->lock); can->can.bittiming_const = &kvaser_pciefd_bittiming_const; @@ -1510,19 +1518,21 @@ static int kvaser_pciefd_handle_ack_packet(struct kvaser_pciefd *pcie, netdev_dbg(can->can.dev, "Packet was flushed\n"); } else { int echo_idx = FIELD_GET(KVASER_PCIEFD_PACKET_SEQ_MASK, p->header[0]); - int len; - u8 count; + unsigned int len, frame_len = 0; struct sk_buff *skb; + if (echo_idx != (can->ack_idx & (can->can.echo_skb_max - 1))) + return 0; skb = can->can.echo_skb[echo_idx]; - if (skb) - kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); - len = can_get_echo_skb(can->can.dev, echo_idx, NULL); - count = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_CURRENT_MASK, - ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); + if (!skb) + return 0; + kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); + len = can_get_echo_skb(can->can.dev, echo_idx, &frame_len); - if (count < can->can.echo_skb_max && netif_queue_stopped(can->can.dev)) - netif_wake_queue(can->can.dev); + /* Pairs with barrier in kvaser_pciefd_start_xmit() */ + smp_store_release(&can->ack_idx, can->ack_idx + 1); + can->completed_tx_pkts++; + can->completed_tx_bytes += frame_len; if (!one_shot_fail) { can->can.dev->stats.tx_bytes += len; @@ -1638,11 +1648,26 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf) { int pos = 0; int res = 0; + unsigned int i; do { res = kvaser_pciefd_read_packet(pcie, &pos, dma_buf); } while (!res && pos > 0 && pos < KVASER_PCIEFD_DMA_SIZE); + /* Report ACKs in this buffer to BQL en masse for correct periods */ + for (i = 0; i < pcie->nr_channels; ++i) { + struct kvaser_pciefd_can *can = pcie->can[i]; + + if (!can->completed_tx_pkts) + continue; + netif_subqueue_completed_wake(can->can.dev, 0, + can->completed_tx_pkts, + can->completed_tx_bytes, + kvaser_pciefd_tx_avail(can), 1); + can->completed_tx_pkts = 0; + can->completed_tx_bytes = 0; + } + return res; } -- 2.47.2

7 months

1
0
0 0

[PATCH net 1/4] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ

by Marc Kleine-Budde

From: Axel Forsman <axfo(a)kvaser.com> Avoid the driver missing IRQs by temporarily masking IRQs in the ISR to enforce an edge even if a different IRQ is signalled before handled IRQs are cleared. Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR") Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/kvaser_pciefd.c | 83 ++++++++++++++++----------------- 1 file changed, 39 insertions(+), 44 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index cf0d51805272..9cc9176c2058 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1646,24 +1646,28 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf) return res; } -static u32 kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) +static void kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) { + void __iomem *srb_cmd_reg = KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG; u32 irq = ioread32(KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) { + kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, srb_cmd_reg); /* Rearm buffer */ + } + + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) { kvaser_pciefd_read_buffer(pcie, 1); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, srb_cmd_reg); /* Rearm buffer */ + } if (unlikely(irq & KVASER_PCIEFD_SRB_IRQ_DOF0 || irq & KVASER_PCIEFD_SRB_IRQ_DOF1 || irq & KVASER_PCIEFD_SRB_IRQ_DUF0 || irq & KVASER_PCIEFD_SRB_IRQ_DUF1)) dev_err(&pcie->pci->dev, "DMA IRQ error 0x%08X\n", irq); - - iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - return irq; } static void kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can) @@ -1691,29 +1695,22 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev) struct kvaser_pciefd *pcie = (struct kvaser_pciefd *)dev; const struct kvaser_pciefd_irq_mask *irq_mask = pcie->driver_data->irq_mask; u32 pci_irq = ioread32(KVASER_PCIEFD_PCI_IRQ_ADDR(pcie)); - u32 srb_irq = 0; - u32 srb_release = 0; int i; if (!(pci_irq & irq_mask->all)) return IRQ_NONE; + iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + if (pci_irq & irq_mask->kcan_rx0) - srb_irq = kvaser_pciefd_receive_irq(pcie); + kvaser_pciefd_receive_irq(pcie); for (i = 0; i < pcie->nr_channels; i++) { if (pci_irq & irq_mask->kcan_tx[i]) kvaser_pciefd_transmit_irq(pcie->can[i]); } - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB0; - - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB1; - - if (srb_release) - iowrite32(srb_release, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); return IRQ_HANDLED; } @@ -1733,13 +1730,22 @@ static void kvaser_pciefd_teardown_can_ctrls(struct kvaser_pciefd *pcie) } } +static void kvaser_pciefd_disable_irq_srcs(struct kvaser_pciefd *pcie) +{ + unsigned int i; + + /* Masking PCI_IRQ is insufficient as running ISR will unmask it */ + iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); + for (i = 0; i < pcie->nr_channels; ++i) + iowrite32(0, pcie->can[i]->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); +} + static int kvaser_pciefd_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int ret; struct kvaser_pciefd *pcie; const struct kvaser_pciefd_irq_mask *irq_mask; - void __iomem *irq_en_base; pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); if (!pcie) @@ -1805,8 +1811,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); /* Enable PCI interrupts */ - irq_en_base = KVASER_PCIEFD_PCI_IEN_ADDR(pcie); - iowrite32(irq_mask->all, irq_en_base); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); /* Ready the DMA buffers */ iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); @@ -1820,8 +1825,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return 0; err_free_irq: - /* Disable PCI interrupts */ - iowrite32(0, irq_en_base); + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); err_pci_free_irq_vectors: @@ -1844,35 +1848,26 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return ret; } -static void kvaser_pciefd_remove_all_ctrls(struct kvaser_pciefd *pcie) -{ - int i; - - for (i = 0; i < pcie->nr_channels; i++) { - struct kvaser_pciefd_can *can = pcie->can[i]; - - if (can) { - iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); - unregister_candev(can->can.dev); - timer_delete(&can->bec_poll_timer); - kvaser_pciefd_pwm_stop(can); - free_candev(can->can.dev); - } - } -} - static void kvaser_pciefd_remove(struct pci_dev *pdev) { struct kvaser_pciefd *pcie = pci_get_drvdata(pdev); + unsigned int i; - kvaser_pciefd_remove_all_ctrls(pcie); + for (i = 0; i < pcie->nr_channels; ++i) { + struct kvaser_pciefd_can *can = pcie->can[i]; - /* Disable interrupts */ - iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CTRL_REG); - iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + unregister_candev(can->can.dev); + timer_delete(&can->bec_poll_timer); + kvaser_pciefd_pwm_stop(can); + } + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); pci_free_irq_vectors(pcie->pci); + + for (i = 0; i < pcie->nr_channels; ++i) + free_candev(pcie->can[i]->can.dev); + pci_iounmap(pdev, pcie->reg_base); pci_release_regions(pdev); pci_disable_device(pdev); base-commit: 9e89db3d847f2d66d2799c5533d00aebee2be4d1 -- 2.47.2

7 months

1
0
0 0

[PATCH v1] media: i2c: set lt6911uxe's reset_gpio to GPIOD_OUT_LOW

by Dongcheng Yan

reset_gpio needs to be an output and set to GPIOD_OUT_LOW, to ensure lt6911uxe is in reset state during probe. This issue was found on the onboard lt6911uxe, where the reset_pin was not reset, causing the lt6911uxe to fail to probe. Fixes: e49563c3be09d4 ("media: i2c: add lt6911uxe hdmi bridge driver") Cc: stable(a)vger.kernel.org Signed-off-by: Dongcheng Yan <dongcheng.yan(a)intel.com> --- drivers/media/i2c/lt6911uxe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/lt6911uxe.c b/drivers/media/i2c/lt6911uxe.c index c5b40bb58a37..4e2109db0145 100644 --- a/drivers/media/i2c/lt6911uxe.c +++ b/drivers/media/i2c/lt6911uxe.c @@ -600,7 +600,7 @@ static int lt6911uxe_probe(struct i2c_client *client) v4l2_i2c_subdev_init(&lt6911uxe->sd, client, &lt6911uxe_subdev_ops); - lt6911uxe->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_IN); + lt6911uxe->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(lt6911uxe->reset_gpio)) return dev_err_probe(dev, PTR_ERR(lt6911uxe->reset_gpio), "failed to get reset gpio\n"); base-commit: f2151613e040973c868d28c8b00885dfab69eb75 prerequisite-patch-id: 6cade6d98fab1ea36ed59fe5502d7d2457180ca5 -- 2.34.1

7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025