July 2025 - Linux-stable-mirror

[PATCH net] net: libwx: fix double put of page to page_pool

by Jiawen Wu

wx_dma_sync_frag() incorrectly attempted to return the page to page_pool, which is already handled via buffer reuse or wx_build_skb() paths. Under high MTU and high throughput, this causes list corruption inside page_pool due to double free. [ 876.949950] Call Trace: [ 876.949951] <IRQ> [ 876.949952] __rmqueue_pcplist+0x53/0x2c0 [ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660 [ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400 [ 876.949961] page_pool_alloc_pages+0xa/0x20 [ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx] [ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx] [ 876.949971] wx_poll+0x92/0x130 [libwx] [ 876.949975] __napi_poll+0x28/0x190 [ 876.949977] net_rx_action+0x301/0x3f0 [ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949981] ? profile_tick+0x30/0x70 [ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949986] ? timerqueue_add+0xa3/0xc0 [ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949989] ? __raise_softirq_irqoff+0x16/0x70 [ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx] [ 876.949998] handle_softirqs+0xf9/0x2c0 Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable(a)vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu(a)trustnetic.com> --- drivers/net/ethernet/wangxun/libwx/wx_lib.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c index c57cc4f27249..246b18a0285e 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c @@ -174,10 +174,6 @@ static void wx_dma_sync_frag(struct wx_ring *rx_ring, skb_frag_off(frag), skb_frag_size(frag), DMA_FROM_DEVICE); - - /* If the page was released, just unmap it. */ - if (unlikely(WX_CB(skb)->page_released)) - page_pool_put_full_page(rx_ring->page_pool, rx_buffer->page, false); } static struct wx_rx_buffer *wx_get_rx_buffer(struct wx_ring *rx_ring, -- 2.48.1

1 month, 1 week

2
2
0 0

[PATCH] drm/v3d: Disable interrupts before resetting the GPU

by Maíra Canal

Currently, an interrupt can be triggered during a GPU reset, which can lead to GPU hangs and NULL pointer dereference in an interrupt context as shown in the following trace: [ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 314.043822] Mem abort info: [ 314.046606] ESR = 0x0000000096000005 [ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits [ 314.055651] SET = 0, FnV = 0 [ 314.058695] EA = 0, S1PTW = 0 [ 314.061826] FSC = 0x05: level 1 translation fault [ 314.066694] Data abort info: [ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000 [ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d] [ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d] [ 314.160198] sp : ffffffc080003ea0 [ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000 [ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0 [ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000 [ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000 [ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000 [ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001 [ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874 [ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180 [ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb [ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 314.234807] Call trace: [ 314.237243] v3d_irq+0xec/0x2e0 [v3d] [ 314.240906] __handle_irq_event_percpu+0x58/0x218 [ 314.245609] handle_irq_event+0x54/0xb8 [ 314.249439] handle_fasteoi_irq+0xac/0x240 [ 314.253527] handle_irq_desc+0x48/0x68 [ 314.257269] generic_handle_domain_irq+0x24/0x38 [ 314.261879] gic_handle_irq+0x48/0xd8 [ 314.265533] call_on_irq_stack+0x24/0x58 [ 314.269448] do_interrupt_handler+0x88/0x98 [ 314.273624] el1_interrupt+0x34/0x68 [ 314.277193] el1h_64_irq_handler+0x18/0x28 [ 314.281281] el1h_64_irq+0x64/0x68 [ 314.284673] default_idle_call+0x3c/0x168 [ 314.288675] do_idle+0x1fc/0x230 [ 314.291895] cpu_startup_entry+0x3c/0x50 [ 314.295810] rest_init+0xe4/0xf0 [ 314.299030] start_kernel+0x5e8/0x790 [ 314.302684] __primary_switched+0x80/0x90 [ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017) [ 314.312775] ---[ end trace 0000000000000000 ]--- [ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 314.324249] SMP: stopping secondary CPUs [ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000 [ 314.334076] PHYS_OFFSET: 0x0 [ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b [ 314.342337] Memory Limit: none [ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Before resetting the GPU, it's necessary to disable all interrupts and deal with any interrupt handler still in-flight. Otherwise, the GPU might reset with jobs still running, or yet, an interrupt could be handled during the reset. Cc: stable(a)vger.kernel.org Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Signed-off-by: Maíra Canal <mcanal(a)igalia.com> --- drivers/gpu/drm/v3d/v3d_drv.h | 8 ++++++++ drivers/gpu/drm/v3d/v3d_gem.c | 2 ++ drivers/gpu/drm/v3d/v3d_irq.c | 37 +++++++++++++++++++++++++---------- 3 files changed, 37 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/v3d/v3d_drv.h b/drivers/gpu/drm/v3d/v3d_drv.h index b51f0b648a08..411e47702f8a 100644 --- a/drivers/gpu/drm/v3d/v3d_drv.h +++ b/drivers/gpu/drm/v3d/v3d_drv.h @@ -101,6 +101,12 @@ enum v3d_gen { V3D_GEN_71 = 71, }; +enum v3d_irq { + V3D_CORE_IRQ, + V3D_HUB_IRQ, + V3D_MAX_IRQS, +}; + struct v3d_dev { struct drm_device drm; @@ -112,6 +118,8 @@ struct v3d_dev { bool single_irq_line; + int irq[V3D_MAX_IRQS]; + struct v3d_perfmon_info perfmon_info; void __iomem *hub_regs; diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c index d7d16da78db3..37bf5eecdd2c 100644 --- a/drivers/gpu/drm/v3d/v3d_gem.c +++ b/drivers/gpu/drm/v3d/v3d_gem.c @@ -134,6 +134,8 @@ v3d_reset(struct v3d_dev *v3d) if (false) v3d_idle_axi(v3d, 0); + v3d_irq_disable(v3d); + v3d_idle_gca(v3d); v3d_reset_sms(v3d); v3d_reset_v3d(v3d); diff --git a/drivers/gpu/drm/v3d/v3d_irq.c b/drivers/gpu/drm/v3d/v3d_irq.c index 2cca5d3a26a2..a515a301e480 100644 --- a/drivers/gpu/drm/v3d/v3d_irq.c +++ b/drivers/gpu/drm/v3d/v3d_irq.c @@ -260,7 +260,7 @@ v3d_hub_irq(int irq, void *arg) int v3d_irq_init(struct v3d_dev *v3d) { - int irq1, ret, core; + int irq, ret, core; INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work); @@ -271,17 +271,24 @@ v3d_irq_init(struct v3d_dev *v3d) V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS(v3d->ver)); V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS(v3d->ver)); - irq1 = platform_get_irq_optional(v3d_to_pdev(v3d), 1); - if (irq1 == -EPROBE_DEFER) - return irq1; - if (irq1 > 0) { - ret = devm_request_irq(v3d->drm.dev, irq1, + irq = platform_get_irq_optional(v3d_to_pdev(v3d), 1); + if (irq == -EPROBE_DEFER) + return irq; + if (irq > 0) { + v3d->irq[V3D_CORE_IRQ] = irq; + + ret = devm_request_irq(v3d->drm.dev, v3d->irq[V3D_CORE_IRQ], v3d_irq, IRQF_SHARED, "v3d_core0", v3d); if (ret) goto fail; - ret = devm_request_irq(v3d->drm.dev, - platform_get_irq(v3d_to_pdev(v3d), 0), + + irq = platform_get_irq(v3d_to_pdev(v3d), 0); + if (irq < 0) + return irq; + v3d->irq[V3D_HUB_IRQ] = irq; + + ret = devm_request_irq(v3d->drm.dev, v3d->irq[V3D_HUB_IRQ], v3d_hub_irq, IRQF_SHARED, "v3d_hub", v3d); if (ret) @@ -289,8 +296,12 @@ v3d_irq_init(struct v3d_dev *v3d) } else { v3d->single_irq_line = true; - ret = devm_request_irq(v3d->drm.dev, - platform_get_irq(v3d_to_pdev(v3d), 0), + irq = platform_get_irq(v3d_to_pdev(v3d), 0); + if (irq < 0) + return irq; + v3d->irq[V3D_CORE_IRQ] = irq; + + ret = devm_request_irq(v3d->drm.dev, v3d->irq[V3D_CORE_IRQ], v3d_irq, IRQF_SHARED, "v3d", v3d); if (ret) @@ -331,6 +342,12 @@ v3d_irq_disable(struct v3d_dev *v3d) V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~0); V3D_WRITE(V3D_HUB_INT_MSK_SET, ~0); + /* Finish any interrupt handler still in flight. */ + for (int i = 0; i < V3D_MAX_IRQS; i++) { + if (v3d->irq[i]) + synchronize_irq(v3d->irq[i]); + } + /* Clear any pending interrupts we might have left. */ for (core = 0; core < v3d->cores; core++) V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS(v3d->ver)); -- 2.50.0

1 month, 1 week

3
3
0 0

[PATCH net v2] net: libwx: fix the incorrect display of the queue number

by Jiawen Wu

When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is changed to be 1. RSS is disabled at this moment, and the indices of FDIR have not be changed in wx_set_rss_queues(). So the combined count still shows the previous value. This issue was introduced when supporting FDIR. Fix it for those devices that support FDIR. Fixes: 34744a7749b3 ("net: txgbe: add FDIR info to ethtool ops") Cc: stable(a)vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu(a)trustnetic.com> Reviewed-by: Simon Horman <horms(a)kernel.org> --- v1 -> v2: - fix it in wx_set_rss_queues() --- drivers/net/ethernet/wangxun/libwx/wx_lib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c index 85c606805e27..55e252789db3 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c @@ -1705,6 +1705,7 @@ static void wx_set_rss_queues(struct wx *wx) clear_bit(WX_FLAG_FDIR_HASH, wx->flags); + wx->ring_feature[RING_F_FDIR].indices = 1; /* Use Flow Director in addition to RSS to ensure the best * distribution of flows across cores, even when an FDIR flow * isn't matched. -- 2.48.1

1 month, 1 week

3
2
0 0

FAILED: patch "[PATCH] staging: rtl8723bs: Avoid memset() in aes_cipher() and" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x a55bc4ffc06d8c965a7d6f0a01ed0ed41380df28 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063055-overfed-dispute-71ba@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a55bc4ffc06d8c965a7d6f0a01ed0ed41380df28 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor <nathan(a)kernel.org> Date: Mon, 9 Jun 2025 14:13:14 -0700 Subject: [PATCH] staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher() After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which causes CONFIG_KASAN to be enabled in allmodconfig again, arm64 allmodconfig builds with older versions of clang (15 through 17) show an instance of -Wframe-larger-than (which breaks the build with CONFIG_WERROR=y): drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than] 1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) | ^ This comes from aes_decipher() being inlined in rtw_aes_decrypt(). Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher() also uses a decent amount of stack, just under the limit of 2048: drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than] 864 | static signed int aes_cipher(u8 *key, uint hdrlen, | ^ -Rpass-analysis=stack-frame-layout only shows one large structure on the stack, which is the ctx variable inlined from aes128k128d(). A good number of the other variables come from the additional checks of fortified string routines, which are present in memset(), which both aes_cipher() and aes_decipher() use to initialize some temporary buffers. In this case, since the size is known at compile time, these additional checks should not result in any code generation changes but allmodconfig has several sanitizers enabled, which may make it harder for the compiler to eliminate the compile time checks and the variables that come about from them. The memset() calls are just initializing these buffers to zero, so use '= {}' instead, which is used all over the kernel and does the exact same thing as memset() without the fortify checks, which drops the stack usage of these functions by a few hundred kilobytes. drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than] 864 | static signed int aes_cipher(u8 *key, uint hdrlen, | ^ drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than] 1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) | ^ Cc: stable(a)vger.kernel.org Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Nathan Chancellor <nathan(a)kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter(a)linaro.org> Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2ac… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/staging/rtl8723bs/core/rtw_security.c b/drivers/staging/rtl8723bs/core/rtw_security.c index 1e9eff01b1aa..e9f382c280d9 100644 --- a/drivers/staging/rtl8723bs/core/rtw_security.c +++ b/drivers/staging/rtl8723bs/core/rtw_security.c @@ -868,29 +868,21 @@ static signed int aes_cipher(u8 *key, uint hdrlen, num_blocks, payload_index; u8 pn_vector[6]; - u8 mic_iv[16]; - u8 mic_header1[16]; - u8 mic_header2[16]; - u8 ctr_preload[16]; + u8 mic_iv[16] = {}; + u8 mic_header1[16] = {}; + u8 mic_header2[16] = {}; + u8 ctr_preload[16] = {}; /* Intermediate Buffers */ - u8 chain_buffer[16]; - u8 aes_out[16]; - u8 padded_buffer[16]; + u8 chain_buffer[16] = {}; + u8 aes_out[16] = {}; + u8 padded_buffer[16] = {}; u8 mic[8]; uint frtype = GetFrameType(pframe); uint frsubtype = GetFrameSubType(pframe); frsubtype = frsubtype>>4; - memset((void *)mic_iv, 0, 16); - memset((void *)mic_header1, 0, 16); - memset((void *)mic_header2, 0, 16); - memset((void *)ctr_preload, 0, 16); - memset((void *)chain_buffer, 0, 16); - memset((void *)aes_out, 0, 16); - memset((void *)padded_buffer, 0, 16); - if ((hdrlen == WLAN_HDR_A3_LEN) || (hdrlen == WLAN_HDR_A3_QOS_LEN)) a4_exists = 0; else @@ -1080,15 +1072,15 @@ static signed int aes_decipher(u8 *key, uint hdrlen, num_blocks, payload_index; signed int res = _SUCCESS; u8 pn_vector[6]; - u8 mic_iv[16]; - u8 mic_header1[16]; - u8 mic_header2[16]; - u8 ctr_preload[16]; + u8 mic_iv[16] = {}; + u8 mic_header1[16] = {}; + u8 mic_header2[16] = {}; + u8 ctr_preload[16] = {}; /* Intermediate Buffers */ - u8 chain_buffer[16]; - u8 aes_out[16]; - u8 padded_buffer[16]; + u8 chain_buffer[16] = {}; + u8 aes_out[16] = {}; + u8 padded_buffer[16] = {}; u8 mic[8]; uint frtype = GetFrameType(pframe); @@ -1096,14 +1088,6 @@ static signed int aes_decipher(u8 *key, uint hdrlen, frsubtype = frsubtype>>4; - memset((void *)mic_iv, 0, 16); - memset((void *)mic_header1, 0, 16); - memset((void *)mic_header2, 0, 16); - memset((void *)ctr_preload, 0, 16); - memset((void *)chain_buffer, 0, 16); - memset((void *)aes_out, 0, 16); - memset((void *)padded_buffer, 0, 16); - /* start to decrypt the payload */ num_blocks = (plen-8) / 16; /* plen including LLC, payload_length and mic) */

1 month, 1 week

4
3
0 0

[PATCH] riscv: cpu_ops_sbi: Use static array for boot_data

by Vivian Wang

Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU Cc: stable(a)vger.kernel.org Reported-by: Han Gao <rabenda.cn(a)gmail.com> Fixes: 9a2451f18663 ("RISC-V: Avoid using per cpu array for ordered booting") Signed-off-by: Vivian Wang <wangruikang(a)iscas.ac.cn> --- arch/riscv/kernel/cpu_ops_sbi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c index e6fbaaf549562d6e9ca63a66371441fe8b230cb3..87d6559448039cdd2e8a604a19bd832ab5a98fc2 100644 --- a/arch/riscv/kernel/cpu_ops_sbi.c +++ b/arch/riscv/kernel/cpu_ops_sbi.c @@ -18,10 +18,10 @@ const struct cpu_operations cpu_ops_sbi; /* * Ordered booting via HSM brings one cpu at a time. However, cpu hotplug can - * be invoked from multiple threads in parallel. Define a per cpu data + * be invoked from multiple threads in parallel. Define an array of boot data * to handle that. */ -static DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data); +static struct sbi_hart_boot_data boot_data[NR_CPUS]; static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr, unsigned long priv) @@ -67,7 +67,7 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle) unsigned long boot_addr = __pa_symbol(secondary_start_sbi); unsigned long hartid = cpuid_to_hartid_map(cpuid); unsigned long hsm_data; - struct sbi_hart_boot_data *bdata = &per_cpu(boot_data, cpuid); + struct sbi_hart_boot_data *bdata = &boot_data[cpuid]; /* Make sure tidle is updated */ smp_mb(); --- base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494 change-id: 20250624-riscv-hsm-boot-data-array-1d392098bd22 Best regards, -- Vivian "dramforever" Wang

1 month, 1 week

3
2
0 0

[PATCH] media: iris: Call correct power off callback in cleanup path

by Krzysztof Kozlowski

Driver implements different callbacks for the power off controller (.power_off_controller): - iris_vpu_power_off_controller, - iris_vpu33_power_off_controller, The generic wrapper for handling power off - iris_vpu_power_off() - calls them via 'iris_platform_data->vpu_ops', so shall the cleanup code in iris_vpu_power_on(). This makes also sense if looking at caller of iris_vpu_power_on(), which unwinds also with the wrapper calling respective platfortm code (unwinds with iris_vpu_power_off()). Otherwise power off sequence on the newer VPU3.3 in error path is not complete. Fixes: c69df5de4ac3 ("media: platform: qcom/iris: add power_off_controller to vpu_ops") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/media/platform/qcom/iris/iris_vpu_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c index 268e45acaa7c..42a7c53ce48e 100644 --- a/drivers/media/platform/qcom/iris/iris_vpu_common.c +++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c @@ -359,7 +359,7 @@ int iris_vpu_power_on(struct iris_core *core) return 0; err_power_off_ctrl: - iris_vpu_power_off_controller(core); + core->iris_platform_data->vpu_ops->power_off_controller(core); err_unvote_icc: iris_unset_icc_bw(core); err: -- 2.43.0

1 month, 1 week

3
2
0 0

[PATCH net] net: ipv4: fix incorrect MTU in broadcast routes

by Oscar Maes

Currently, __mkroute_output overrules the MTU value configured for broadcast routes. This buggy behaviour can be reproduced with: ip link set dev eth1 mtu 9000 ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500 The maximum packet size should be 1500, but it is actually 8000: ping -b 192.168.0.255 -s 8000 Fix __mkroute_output to allow MTU values to be configured for for broadcast routes (to support a mixed-MTU local-area-network). Signed-off-by: Oscar Maes <oscmaes92(a)gmail.com> --- net/ipv4/route.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fccb05fb3..a2a3b6482 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2585,7 +2585,6 @@ static struct rtable *__mkroute_output(const struct fib_result *res, do_cache = true; if (type == RTN_BROADCAST) { flags |= RTCF_BROADCAST | RTCF_LOCAL; - fi = NULL; } else if (type == RTN_MULTICAST) { flags |= RTCF_MULTICAST | RTCF_LOCAL; if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr, -- 2.39.5

1 month, 1 week

3
2
0 0

[PATCH] dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint

by Krzysztof Kozlowski

Lists should have fixed amount if items, so add missing constraint to the 'reg' property (only one address space entry). Fixes: c5eda0333076 ("dt-bindings: i2c: Add Realtek RTL I2C Controller") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml index eddfd329c67b..69ac5db8b914 100644 --- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -26,7 +26,8 @@ properties: - const: realtek,rtl9301-i2c reg: - description: Register offset and size this I2C controller. + items: + - description: Register offset and size this I2C controller. "#address-cells": const: 1 -- 2.43.0

1 month, 1 week

2
1
0 0

FAILED: patch "[PATCH] io_uring/kbuf: account ring io_buffer_list memory" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 475a8d30371604a6363da8e304a608a5959afc40 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062043-header-audio-50d2@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 475a8d30371604a6363da8e304a608a5959afc40 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov <asml.silence(a)gmail.com> Date: Tue, 13 May 2025 18:26:46 +0100 Subject: [PATCH] io_uring/kbuf: account ring io_buffer_list memory Follow the non-ringed pbuf struct io_buffer_list allocations and account it against the memcg. There is low chance of that being an actual problem as ring provided buffer should either pin user memory or allocate it, which is already accounted. Cc: stable(a)vger.kernel.org # 6.1 Signed-off-by: Pavel Begunkov <asml.silence(a)gmail.com> Link: https://lore.kernel.org/r/3985218b50d341273cafff7234e1a7e6d0db9808.17471504… Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index 1cf0d2c01287..446207db1edf 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -621,7 +621,7 @@ int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) io_destroy_bl(ctx, bl); } - free_bl = bl = kzalloc(sizeof(*bl), GFP_KERNEL); + free_bl = bl = kzalloc(sizeof(*bl), GFP_KERNEL_ACCOUNT); if (!bl) return -ENOMEM;

1 month, 1 week

3
2
0 0

FAILED: patch "[PATCH] nvme: always punt polled uring_cmd end_io work to task_work" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 9ce6c9875f3e995be5fd720b65835291f8a609b1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062012-veggie-grout-8f7e@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce6c9875f3e995be5fd720b65835291f8a609b1 Mon Sep 17 00:00:00 2001 From: Jens Axboe <axboe(a)kernel.dk> Date: Fri, 13 Jun 2025 13:37:41 -0600 Subject: [PATCH] nvme: always punt polled uring_cmd end_io work to task_work Currently NVMe uring_cmd completions will complete locally, if they are polled. This is done because those completions are always invoked from task context. And while that is true, there's no guarantee that it's invoked under the right ring context, or even task. If someone does NVMe passthrough via multiple threads and with a limited number of poll queues, then ringA may find completions from ringB. For that case, completing the request may not be sound. Always just punt the passthrough completions via task_work, which will redirect the completion, if needed. Cc: stable(a)vger.kernel.org Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands") Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 0b50da2f1175..6b3ac8ae3f34 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -429,21 +429,14 @@ static enum rq_end_io_ret nvme_uring_cmd_end_io(struct request *req, pdu->result = le64_to_cpu(nvme_req(req)->result.u64); /* - * For iopoll, complete it directly. Note that using the uring_cmd - * helper for this is safe only because we check blk_rq_is_poll(). - * As that returns false if we're NOT on a polled queue, then it's - * safe to use the polled completion helper. - * - * Otherwise, move the completion to task work. + * IOPOLL could potentially complete this request directly, but + * if multiple rings are polling on the same queue, then it's possible + * for one ring to find completions for another ring. Punting the + * completion via task_work will always direct it to the right + * location, rather than potentially complete requests for ringA + * under iopoll invocations from ringB. */ - if (blk_rq_is_poll(req)) { - if (pdu->bio) - blk_rq_unmap_user(pdu->bio); - io_uring_cmd_iopoll_done(ioucmd, pdu->result, pdu->status); - } else { - io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); - } - + io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); return RQ_END_IO_FREE; }

1 month, 1 week

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2025