The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x a9503a2ecd95e23d7243bcde7138192de8c1c281
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072119-chili-word-b009@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a9503a2ecd95e23d7243bcde7138192de8c1c281 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Date: Sat, 5 Jul 2025 09:57:37 +0200
Subject: [PATCH] i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
omap_i2c_init() can fail. Handle this error in omap_i2c_probe().
Fixes: 010d442c4a29 ("i2c: New bus driver for TI OMAP boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr>
Cc: <stable(a)vger.kernel.org> # v2.6.19+
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/565311abf9bafd7291ca82bcecb48c1fac1e727b.17517017…
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8b01df3cc8e9..17db58195c06 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1472,7 +1472,9 @@ omap_i2c_probe(struct platform_device *pdev)
}
/* reset ASAP, clearing any IRQs */
- omap_i2c_init(omap);
+ r = omap_i2c_init(omap);
+ if (r)
+ goto err_mux_state_deselect;
if (omap->rev < OMAP_I2C_OMAP1_REV_2)
r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
@@ -1515,6 +1517,7 @@ omap_i2c_probe(struct platform_device *pdev)
err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+err_mux_state_deselect:
if (omap->mux_state)
mux_state_deselect(omap->mux_state);
err_put_pm:
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072107-provolone-sagging-274b@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072106-unburned-armory-4501@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072105-chatroom-overbuilt-5fd3@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072105-hardwired-crummy-801a@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6aae87fe7f180cd93a74466cdb6cf2aa9bb28798 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20Le=20Goffic?= <clement.legoffic(a)foss.st.com>
Date: Fri, 4 Jul 2025 10:39:15 +0200
Subject: [PATCH] i2c: stm32f7: unmap DMA mapped buffer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic(a)foss.st.com>
Cc: <stable(a)vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat(a)foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.c…
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 817d081460c2..73a7b8894c0d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -739,10 +739,11 @@ static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
static void stm32f7_i2c_dma_callback(void *arg)
{
- struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32f7_i2c_dev *i2c_dev = arg;
struct stm32_i2c_dma *dma = i2c_dev->dma;
stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
dma->dma_data_dir);
complete(&dma->dma_complete);
@@ -1510,7 +1511,6 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
@@ -1551,10 +1551,8 @@ static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev,
}
/* Disable dma */
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
@@ -1600,7 +1598,6 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
- struct stm32_i2c_dma *dma = i2c_dev->dma;
void __iomem *base = i2c_dev->base;
u32 status, mask;
int ret;
@@ -1619,10 +1616,8 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
__func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
- if (i2c_dev->use_dma) {
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
- }
+ if (i2c_dev->use_dma)
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ENXIO;
}
@@ -1640,8 +1635,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
- stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_async(dma->chan_using);
+ stm32f7_i2c_dma_callback(i2c_dev);
f7_msg->result = -ETIMEDOUT;
}
}
The patch below does not apply to the all-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-all.y
git checkout FETCH_HEAD
git cherry-pick -x ef8abc0ba49ce717e6bc4124e88e59982671f3b5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025072108-canned-impound-9ee7@gregkh' --subject-prefix 'PATCH all.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ef8abc0ba49ce717e6bc4124e88e59982671f3b5 Mon Sep 17 00:00:00 2001
From: Krishna Kurapati <krishna.kurapati(a)oss.qualcomm.com>
Date: Wed, 9 Jul 2025 18:59:00 +0530
Subject: [PATCH] usb: dwc3: qcom: Don't leave BCR asserted
Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:
[ 1.332226] usb30_prim_gdsc status stuck at 'off'
Leave the BCR deasserted when exiting the driver to avoid this issue.
Cc: stable <stable(a)kernel.org>
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Acked-by: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati(a)oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qua…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 7334de85ad10..ca7e1c02773a 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -680,12 +680,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
ret = reset_control_deassert(qcom->resets);
if (ret) {
dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
- goto reset_assert;
+ return ret;
}
ret = clk_bulk_prepare_enable(qcom->num_clocks, qcom->clks);
if (ret < 0)
- goto reset_assert;
+ return ret;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
@@ -755,8 +755,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
dwc3_core_remove(&qcom->dwc);
clk_disable:
clk_bulk_disable_unprepare(qcom->num_clocks, qcom->clks);
-reset_assert:
- reset_control_assert(qcom->resets);
return ret;
}
@@ -771,7 +769,6 @@ static void dwc3_qcom_remove(struct platform_device *pdev)
clk_bulk_disable_unprepare(qcom->num_clocks, qcom->clks);
dwc3_qcom_interconnect_exit(qcom);
- reset_control_assert(qcom->resets);
}
static int dwc3_qcom_pm_suspend(struct device *dev)
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection")
Cc: stable(a)vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu(a)realtek.com>
---
drivers/misc/cardreader/rtsx_usb.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c
index 148107a4547c..d007a4455ce5 100644
--- a/drivers/misc/cardreader/rtsx_usb.c
+++ b/drivers/misc/cardreader/rtsx_usb.c
@@ -698,6 +698,12 @@ static void rtsx_usb_disconnect(struct usb_interface *intf)
}
#ifdef CONFIG_PM
+static int rtsx_usb_resume_child(struct device *dev, void *data)
+{
+ pm_request_resume(dev);
+ return 0;
+}
+
static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct rtsx_ucr *ucr =
@@ -713,8 +719,10 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
mutex_unlock(&ucr->dev_mutex);
/* Defer the autosuspend if card exists */
- if (val & (SD_CD | MS_CD))
+ if (val & (SD_CD | MS_CD)) {
+ device_for_each_child(&intf->dev, NULL, rtsx_usb_resume_child);
return -EAGAIN;
+ }
} else {
/* There is an ongoing operation*/
return -EAGAIN;
@@ -724,12 +732,6 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
return 0;
}
-static int rtsx_usb_resume_child(struct device *dev, void *data)
-{
- pm_request_resume(dev);
- return 0;
-}
-
static int rtsx_usb_resume(struct usb_interface *intf)
{
device_for_each_child(&intf->dev, NULL, rtsx_usb_resume_child);
--
2.25.1
DIV_ROUND_CLOSEST(x, 100) returns either 0 or 1 if 0<x<=100, so the
division needs to be performed after the multiplication and not the
other way around, to properly scale the value.
Fixes: 8b5f3a229a70 ("drm/amd/display: Fix default DC and AC levels")
Signed-off-by: Lauri Tirkkonen <lauri(a)hacktheplanet.fi>
Cc: stable(a)vger.kernel.org
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index f58fa5da7fe5..8a5b5dfad1ab 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4941,9 +4941,9 @@ amdgpu_dm_register_backlight_device(struct amdgpu_dm_connector *aconnector)
caps = &dm->backlight_caps[aconnector->bl_idx];
if (get_brightness_range(caps, &min, &max)) {
if (power_supply_is_system_supplied() > 0)
- props.brightness = (max - min) * DIV_ROUND_CLOSEST(caps->ac_level, 100);
+ props.brightness = DIV_ROUND_CLOSEST((max - min) * caps->ac_level, 100);
else
- props.brightness = (max - min) * DIV_ROUND_CLOSEST(caps->dc_level, 100);
+ props.brightness = DIV_ROUND_CLOSEST((max - min) * caps->dc_level, 100);
/* min is zero, so max needs to be adjusted */
props.max_brightness = max - min;
drm_dbg(drm, "Backlight caps: min: %d, max: %d, ac %d, dc %d\n", min, max,
--
2.50.1
--
Lauri Tirkkonen | lotheac @ IRCnet