August 2025 - Linux-stable-mirror

[PATCH] usb: hub: Don't try to recover devices lost during warm reset.

by Mathias Nyman

Hub driver warm-resets ports in SS.Inactive or Compliance mode to recover a possible connected device. The port reset code correctly detects if a connection is lost during reset, but hub driver port_event() fails to take this into account in some cases. port_event() ends up using stale values and assumes there is a connected device, and will try all means to recover it, including power-cycling the port. Details: This case was triggered when xHC host was suspended with DbC (Debug Capability) enabled and connected. DbC turns one xHC port into a simple usb debug device, allowing debugging a system with an A-to-A USB debug cable. xhci DbC code disables DbC when xHC is system suspended to D3, and enables it back during resume. We essentially end up with two hosts connected to each other during suspend, and, for a short while during resume, until DbC is enabled back. The suspended xHC host notices some activity on the roothub port, but can't train the link due to being suspended, so xHC hardware sets a CAS (Cold Attach Status) flag for this port to inform xhci host driver that the port needs to be warm reset once xHC resumes. CAS is xHCI specific, and not part of USB specification, so xhci driver tells usb core that the port has a connection and link is in compliance mode. Recovery from complinace mode is similar to CAS recovery. xhci CAS driver support that fakes a compliance mode connection was added in commit 8bea2bd37df0 ("usb: Add support for root hub port status CAS") Once xHCI resumes and DbC is enabled back, all activity on the xHC roothub host side port disappears. The hub driver will anyway think port has a connection and link is in compliance mode, and hub driver will try to recover it. The port power-cycle during recovery seems to cause issues to the active DbC connection. Fix this by clearing connect_change flag if hub_port_reset() returns -ENOTCONN, thus avoiding the whole unnecessary port recovery and initialization attempt. Cc: stable(a)vger.kernel.org Fixes: 8bea2bd37df0 ("usb: Add support for root hub port status CAS") Tested-by: Łukasz Bartosik <ukaszb(a)chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/core/hub.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6bb6e92cb0a4..f981e365be36 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5754,6 +5754,7 @@ static void port_event(struct usb_hub *hub, int port1) struct usb_device *hdev = hub->hdev; u16 portstatus, portchange; int i = 0; + int err; connect_change = test_bit(port1, hub->change_bits); clear_bit(port1, hub->event_bits); @@ -5850,8 +5851,11 @@ static void port_event(struct usb_hub *hub, int port1) } else if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) || udev->state == USB_STATE_NOTATTACHED) { dev_dbg(&port_dev->dev, "do warm reset, port only\n"); - if (hub_port_reset(hub, port1, NULL, - HUB_BH_RESET_TIME, true) < 0) + err = hub_port_reset(hub, port1, NULL, + HUB_BH_RESET_TIME, true); + if (!udev && err == -ENOTCONN) + connect_change = 0; + else if (err < 0) hub_port_disable(hub, port1, 1); } else { dev_dbg(&port_dev->dev, "do warm reset, full device\n"); -- 2.43.0

57 minutes

4
3
0 0

[PATCH v5.10] uio_hv_generic: Fix another memory leak in error handling paths

by Shivani Agarwal

From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> commit 0b0226be3a52dadd965644bc52a807961c2c26df upstream. Memory allocated by 'vmbus_alloc_ring()' at the beginning of the probe function is never freed in the error handling path. Add the missing 'vmbus_free_ring()' call. Note that it is already freed in the .remove function. Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Link: https://lore.kernel.org/r/0d86027b8eeed8e6360bc3d52bcdb328ff9bdca1.16205440… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal(a)broadcom.com> --- drivers/uio/uio_hv_generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c index 6625d340f..865a5b289 100644 --- a/drivers/uio/uio_hv_generic.c +++ b/drivers/uio/uio_hv_generic.c @@ -306,7 +306,7 @@ hv_uio_probe(struct hv_device *dev, pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE); if (pdata->recv_buf == NULL) { ret = -ENOMEM; - goto fail_close; + goto fail_free_ring; } ret = vmbus_establish_gpadl(channel, pdata->recv_buf, @@ -366,6 +366,8 @@ hv_uio_probe(struct hv_device *dev, fail_close: hv_uio_cleanup(dev, pdata); +fail_free_ring: + vmbus_free_ring(dev->channel); return ret; }

1 hour, 35 minutes

1
0
0 0

[PATCH] uio_hv_generic: Fix another memory leak in error handling paths

by Shivani Agarwal

From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> commit 0b0226be3a52dadd965644bc52a807961c2c26df upstream. Memory allocated by 'vmbus_alloc_ring()' at the beginning of the probe function is never freed in the error handling path. Add the missing 'vmbus_free_ring()' call. Note that it is already freed in the .remove function. Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Link: https://lore.kernel.org/r/0d86027b8eeed8e6360bc3d52bcdb328ff9bdca1.16205440… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal(a)broadcom.com> --- drivers/uio/uio_hv_generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c index 6625d340f..865a5b289 100644 --- a/drivers/uio/uio_hv_generic.c +++ b/drivers/uio/uio_hv_generic.c @@ -306,7 +306,7 @@ hv_uio_probe(struct hv_device *dev, pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE); if (pdata->recv_buf == NULL) { ret = -ENOMEM; - goto fail_close; + goto fail_free_ring; } ret = vmbus_establish_gpadl(channel, pdata->recv_buf, @@ -366,6 +366,8 @@ hv_uio_probe(struct hv_device *dev, fail_close: hv_uio_cleanup(dev, pdata); +fail_free_ring: + vmbus_free_ring(dev->channel); return ret; }

1 hour, 36 minutes

1
0
0 0

[PATCH V4 mm-hotfixes 3/3] x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()

by Harry Yoo

Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). It is inteneded to synchronize page tables via pgd_pouplate_kernel() when 5-level paging is in use and via p4d_pouplate_kernel() when 4-level paging is used. This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...] Cc: <stable(a)vger.kernel.org> Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Closes: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@in… [1] Suggested-by: Dave Hansen <dave.hansen(a)linux.intel.com> Signed-off-by: Harry Yoo <harry.yoo(a)oracle.com> --- arch/x86/include/asm/pgtable_64_types.h | 3 +++ arch/x86/mm/init_64.c | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h index 4604f924d8b8..7eb61ef6a185 100644 --- a/arch/x86/include/asm/pgtable_64_types.h +++ b/arch/x86/include/asm/pgtable_64_types.h @@ -36,6 +36,9 @@ static inline bool pgtable_l5_enabled(void) #define pgtable_l5_enabled() cpu_feature_enabled(X86_FEATURE_LA57) #endif /* USE_EARLY_PGTABLE_L5 */ +#define ARCH_PAGE_TABLE_SYNC_MASK \ + (pgtable_l5_enabled() ? PGTBL_PGD_MODIFIED : PGTBL_P4D_MODIFIED) + extern unsigned int pgdir_shift; extern unsigned int ptrs_per_p4d; diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 76e33bd7c556..a78b498c0dc3 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -223,6 +223,11 @@ static void sync_global_pgds(unsigned long start, unsigned long end) sync_global_pgds_l4(start, end); } +void arch_sync_kernel_mappings(unsigned long start, unsigned long end) +{ + sync_global_pgds(start, end); +} + /* * NOTE: This function is marked __ref because it calls __init function * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0. -- 2.43.0

1 hour, 39 minutes

1
0
0 0

[PATCH V4 mm-hotfixes 2/3] mm: introduce and use {pgd,p4d}_populate_kernel()

by Harry Yoo

Introduce and use {pgd,p4d}_populate_kernel() in core MM code when populating PGD and P4D entries for the kernel address space. These helpers ensure proper synchronization of page tables when updating the kernel portion of top-level page tables. Until now, the kernel has relied on each architecture to handle synchronization of top-level page tables in an ad-hoc manner. For example, see commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes"). However, this approach has proven fragile for following reasons: 1) It is easy to forget to perform the necessary page table synchronization when introducing new changes. For instance, commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for compound devmaps") overlooked the need to synchronize page tables for the vmemmap area. 2) It is also easy to overlook that the vmemmap and direct mapping areas must not be accessed before explicit page table synchronization. For example, commit 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")) caused crashes by accessing the vmemmap area before calling sync_global_pgds(). To address this, as suggested by Dave Hansen, introduce _kernel() variants of the page table population helpers, which invoke architecture-specific hooks to properly synchronize page tables. These are introduced in a new header file, include/linux/pgalloc.h, so they can be called from common code. They reuse existing infrastructure for vmalloc and ioremap. Synchronization requirements are determined by ARCH_PAGE_TABLE_SYNC_MASK, and the actual synchronization is performed by arch_sync_kernel_mappings(). This change currently targets only x86_64, so only PGD and P4D level helpers are introduced. In theory, PUD and PMD level helpers can be added later if needed by other architectures. Currently this is a no-op, since no architecture sets PGTBL_{PGD,P4D}_MODIFIED in ARCH_PAGE_TABLE_SYNC_MASK. Cc: <stable(a)vger.kernel.org> Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Suggested-by: Dave Hansen <dave.hansen(a)linux.intel.com> Signed-off-by: Harry Yoo <harry.yoo(a)oracle.com> --- include/linux/pgalloc.h | 24 ++++++++++++++++++++++++ include/linux/pgtable.h | 4 ++-- mm/kasan/init.c | 12 ++++++------ mm/percpu.c | 6 +++--- mm/sparse-vmemmap.c | 6 +++--- 5 files changed, 38 insertions(+), 14 deletions(-) create mode 100644 include/linux/pgalloc.h diff --git a/include/linux/pgalloc.h b/include/linux/pgalloc.h new file mode 100644 index 000000000000..290ab864320f --- /dev/null +++ b/include/linux/pgalloc.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_PGALLOC_H +#define _LINUX_PGALLOC_H + +#include <linux/pgtable.h> +#include <asm/pgalloc.h> + +static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, + p4d_t *p4d) +{ + pgd_populate(&init_mm, pgd, p4d); + if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) + arch_sync_kernel_mappings(addr, addr); +} + +static inline void p4d_populate_kernel(unsigned long addr, p4d_t *p4d, + pud_t *pud) +{ + p4d_populate(&init_mm, p4d, pud); + if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_P4D_MODIFIED) + arch_sync_kernel_mappings(addr, addr); +} + +#endif /* _LINUX_PGALLOC_H */ diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h index ba699df6ef69..0cf5c6c3e483 100644 --- a/include/linux/pgtable.h +++ b/include/linux/pgtable.h @@ -1469,8 +1469,8 @@ static inline void modify_prot_commit_ptes(struct vm_area_struct *vma, unsigned /* * Architectures can set this mask to a combination of PGTBL_P?D_MODIFIED values - * and let generic vmalloc and ioremap code know when arch_sync_kernel_mappings() - * needs to be called. + * and let generic vmalloc, ioremap and page table update code know when + * arch_sync_kernel_mappings() needs to be called. */ #ifndef ARCH_PAGE_TABLE_SYNC_MASK #define ARCH_PAGE_TABLE_SYNC_MASK 0 diff --git a/mm/kasan/init.c b/mm/kasan/init.c index ced6b29fcf76..8fce3370c84e 100644 --- a/mm/kasan/init.c +++ b/mm/kasan/init.c @@ -13,9 +13,9 @@ #include <linux/mm.h> #include <linux/pfn.h> #include <linux/slab.h> +#include <linux/pgalloc.h> #include <asm/page.h> -#include <asm/pgalloc.h> #include "kasan.h" @@ -191,7 +191,7 @@ static int __ref zero_p4d_populate(pgd_t *pgd, unsigned long addr, pud_t *pud; pmd_t *pmd; - p4d_populate(&init_mm, p4d, + p4d_populate_kernel(addr, p4d, lm_alias(kasan_early_shadow_pud)); pud = pud_offset(p4d, addr); pud_populate(&init_mm, pud, @@ -212,7 +212,7 @@ static int __ref zero_p4d_populate(pgd_t *pgd, unsigned long addr, } else { p = early_alloc(PAGE_SIZE, NUMA_NO_NODE); pud_init(p); - p4d_populate(&init_mm, p4d, p); + p4d_populate_kernel(addr, p4d, p); } } zero_pud_populate(p4d, addr, next); @@ -251,10 +251,10 @@ int __ref kasan_populate_early_shadow(const void *shadow_start, * puds,pmds, so pgd_populate(), pud_populate() * is noops. */ - pgd_populate(&init_mm, pgd, + pgd_populate_kernel(addr, pgd, lm_alias(kasan_early_shadow_p4d)); p4d = p4d_offset(pgd, addr); - p4d_populate(&init_mm, p4d, + p4d_populate_kernel(addr, p4d, lm_alias(kasan_early_shadow_pud)); pud = pud_offset(p4d, addr); pud_populate(&init_mm, pud, @@ -273,7 +273,7 @@ int __ref kasan_populate_early_shadow(const void *shadow_start, if (!p) return -ENOMEM; } else { - pgd_populate(&init_mm, pgd, + pgd_populate_kernel(addr, pgd, early_alloc(PAGE_SIZE, NUMA_NO_NODE)); } } diff --git a/mm/percpu.c b/mm/percpu.c index d9cbaee92b60..a56f35dcc417 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -3108,7 +3108,7 @@ int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, #endif /* BUILD_EMBED_FIRST_CHUNK */ #ifdef BUILD_PAGE_FIRST_CHUNK -#include <asm/pgalloc.h> +#include <linux/pgalloc.h> #ifndef P4D_TABLE_SIZE #define P4D_TABLE_SIZE PAGE_SIZE @@ -3134,13 +3134,13 @@ void __init __weak pcpu_populate_pte(unsigned long addr) if (pgd_none(*pgd)) { p4d = memblock_alloc_or_panic(P4D_TABLE_SIZE, P4D_TABLE_SIZE); - pgd_populate(&init_mm, pgd, p4d); + pgd_populate_kernel(addr, pgd, p4d); } p4d = p4d_offset(pgd, addr); if (p4d_none(*p4d)) { pud = memblock_alloc_or_panic(PUD_TABLE_SIZE, PUD_TABLE_SIZE); - p4d_populate(&init_mm, p4d, pud); + p4d_populate_kernel(addr, p4d, pud); } pud = pud_offset(p4d, addr); diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index 41aa0493eb03..dbd8daccade2 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -27,9 +27,9 @@ #include <linux/spinlock.h> #include <linux/vmalloc.h> #include <linux/sched.h> +#include <linux/pgalloc.h> #include <asm/dma.h> -#include <asm/pgalloc.h> #include <asm/tlbflush.h> #include "hugetlb_vmemmap.h" @@ -229,7 +229,7 @@ p4d_t * __meminit vmemmap_p4d_populate(pgd_t *pgd, unsigned long addr, int node) if (!p) return NULL; pud_init(p); - p4d_populate(&init_mm, p4d, p); + p4d_populate_kernel(addr, p4d, p); } return p4d; } @@ -241,7 +241,7 @@ pgd_t * __meminit vmemmap_pgd_populate(unsigned long addr, int node) void *p = vmemmap_alloc_block_zero(PAGE_SIZE, node); if (!p) return NULL; - pgd_populate(&init_mm, pgd, p); + pgd_populate_kernel(addr, pgd, p); } return pgd; } -- 2.43.0

1 hour, 39 minutes

1
0
0 0

[PATCH V4 mm-hotfixes 1/3] mm: move page table sync declarations to linux/pgtable.h

by Harry Yoo

Move ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to linux/pgtable.h so that they can be used outside of vmalloc and ioremap. Cc: <stable(a)vger.kernel.org> Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo <harry.yoo(a)oracle.com> --- include/linux/pgtable.h | 16 ++++++++++++++++ include/linux/vmalloc.h | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h index 4c035637eeb7..ba699df6ef69 100644 --- a/include/linux/pgtable.h +++ b/include/linux/pgtable.h @@ -1467,6 +1467,22 @@ static inline void modify_prot_commit_ptes(struct vm_area_struct *vma, unsigned } #endif +/* + * Architectures can set this mask to a combination of PGTBL_P?D_MODIFIED values + * and let generic vmalloc and ioremap code know when arch_sync_kernel_mappings() + * needs to be called. + */ +#ifndef ARCH_PAGE_TABLE_SYNC_MASK +#define ARCH_PAGE_TABLE_SYNC_MASK 0 +#endif + +/* + * There is no default implementation for arch_sync_kernel_mappings(). It is + * relied upon the compiler to optimize calls out if ARCH_PAGE_TABLE_SYNC_MASK + * is 0. + */ +void arch_sync_kernel_mappings(unsigned long start, unsigned long end); + #endif /* CONFIG_MMU */ /* diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index fdc9aeb74a44..2759dac6be44 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -219,22 +219,6 @@ extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr, int vmap_pages_range(unsigned long addr, unsigned long end, pgprot_t prot, struct page **pages, unsigned int page_shift); -/* - * Architectures can set this mask to a combination of PGTBL_P?D_MODIFIED values - * and let generic vmalloc and ioremap code know when arch_sync_kernel_mappings() - * needs to be called. - */ -#ifndef ARCH_PAGE_TABLE_SYNC_MASK -#define ARCH_PAGE_TABLE_SYNC_MASK 0 -#endif - -/* - * There is no default implementation for arch_sync_kernel_mappings(). It is - * relied upon the compiler to optimize calls out if ARCH_PAGE_TABLE_SYNC_MASK - * is 0. - */ -void arch_sync_kernel_mappings(unsigned long start, unsigned long end); - /* * Lowlevel-APIs (not for driver use!) */ -- 2.43.0

1 hour, 39 minutes

1
0
0 0

[PATCH 0/2 v5.10] Fix CVE-2021-47498

by Shivani Agarwal

Hi, To Fix CVE-2021-47498 b4459b11e840 is required, but it has a dependency on e2118b3c3d94 ("rearrange core declarations for extended use from dm-zone.c"). Therefore backported both patches for v5.10. Thanks, Shivani Shivani Agarwal (2): dm: rearrange core declarations for extended use from dm-zone.c dm rq: don't queue request to blk-mq during DM suspend drivers/md/dm-core.h | 52 ++++++++++++++++++++++++++++++++++++++ drivers/md/dm-rq.c | 8 ++++++ drivers/md/dm.c | 59 ++++++-------------------------------------- 3 files changed, 67 insertions(+), 52 deletions(-) -- 2.40.4

1 hour, 46 minutes

1
2
0 0

[PATCH v5.10] scsi: pm80xx: Fix memory leak during rmmod

by Shivani Agarwal

From: Ajish Koshy <Ajish.Koshy(a)microchip.com> [ Upstream commit 51e6ed83bb4ade7c360551fa4ae55c4eacea354b ] Driver failed to release all memory allocated. This would lead to memory leak during driver removal. Properly free memory when the module is removed. Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com Acked-by: Jack Wang <jinpu.wang(a)ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy(a)microchip.com> Signed-off-by: Viswas G <Viswas.G(a)microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> [Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal(a)broadcom.com> --- drivers/scsi/pm8001/pm8001_init.c | 11 +++++++++++ drivers/scsi/pm8001/pm8001_sas.h | 1 + 2 files changed, 12 insertions(+) diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index f40db6f40b1d..45bffa49f876 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -1166,6 +1166,7 @@ pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost, goto err_out; /* Memory region for ccb_info*/ + pm8001_ha->ccb_count = ccb_count; pm8001_ha->ccb_info = (struct pm8001_ccb_info *) kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL); if (!pm8001_ha->ccb_info) { @@ -1226,6 +1227,16 @@ static void pm8001_pci_remove(struct pci_dev *pdev) tasklet_kill(&pm8001_ha->tasklet[j]); #endif scsi_host_put(pm8001_ha->shost); + + for (i = 0; i < pm8001_ha->ccb_count; i++) { + dma_free_coherent(&pm8001_ha->pdev->dev, + sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG, + pm8001_ha->ccb_info[i].buf_prd, + pm8001_ha->ccb_info[i].ccb_dma_handle); + } + kfree(pm8001_ha->ccb_info); + kfree(pm8001_ha->devices); + pm8001_free(pm8001_ha); kfree(sha->sas_phy); kfree(sha->sas_port); diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 5cd6fe6a7d2d..74099d82e436 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -515,6 +515,7 @@ struct pm8001_hba_info { u32 iomb_size; /* SPC and SPCV IOMB size */ struct pm8001_device *devices; struct pm8001_ccb_info *ccb_info; + u32 ccb_count; #ifdef PM8001_USE_MSIX int number_of_intr;/*will be used in remove()*/ char intr_drvname[PM8001_MAX_MSIX_VEC] -- 2.40.4

1 hour, 52 minutes

1
0
0 0

from pipe fitting factory source

by selene

4 hours, 18 minutes

1
0
0 0

[REGRESSION] [BISECTED] MT7925 wireless speed drops to zero since kernel 6.14.3 - wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd

by Tal Inbar

Hi, Since kernel v6.14.3, when using wireless to connect to my home router on my laptop, my wireless connection slows down to unusable speeds. More specifically, since kernel 6.14.3, when connecting to the wireless networks of my OpenWRT Router on my Lenovo IdeaPad Slim 15 16AKP10 laptop, either a 2.4ghz or a 5ghz network, the connection speed drops down to 0.1-0.2 Mbps download and 0 Mbps upload when measured using speedtest-cli. My laptop uses an mt7925 chip according to the loaded driver and firmware. Detailed Description: As mentioned above, my wireless connection becomes unusable when using linux 6.14.3 and above, dropping speeds to almost 0 Mbps, even when standing next to my router. Further, pinging archlinux.org results in "Temporary failure in name resolution". Any other wireless device in my house can successfully connect to my router and properly use the internet with good speeds, eg. iphones, ipads, raspberry pi and a windows laptop. When using my Lenovo laptop on a kernel 6.14.3 or higher to connect to other access points, such as my iPhone's hotspot and some TPLink and Zyxel routers - the connection speed is good, and there are no issues, which makes me believe there's something going on with my OpenWRT configuration in conjunction with a commit introduced on kernel 6.14.3 for the mt7925e module as detailed below. I have followed a related issue previously reported on the mailing list regarding a problem with the same wifi chip on kernel 6.14.3, but the merged fix doesn't seem to fix my problem: https://lore.kernel.org/linux-mediatek/EmWnO5b-acRH1TXbGnkx41eJw654vmCR-8_x… I've tested stable builds of 6.15 as well up to 6.15.9 in the last month, which also do not fix the problem. I've also built and bisected v6.14 on june using guides on the Arch Linux wiki, for the following bad commit, same as the previously mentioned reported issue: [80007d3f92fd018d0a052a706400e976b36e3c87] wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd Testing further this week, I cloned mainline after 6.16 was released, built and tested it, and the issue still persists. I reverted the following commits on mainline and retested, to successfully see good wireless speeds: [0aa8496adda570c2005410a30df963a16643a3dc] wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl [cb1353ef34735ec1e5d9efa1fe966f05ff1dc1e1] wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd Then, reverting *only* 0aa8496adda570c2005410a30df963a16643a3dc causes the issue to reproduce, which confirms the issue is caused by commit cb1353ef34735ec1e5d9efa1fe966f05ff1dc1e1 on mainline. I've attached the following files to a bugzilla ticket: - lspci -nnk output: https://bugzilla.kernel.org/attachment.cgi?id=308466 - dmesg output: https://bugzilla.kernel.org/attachment.cgi?id=308465 - .config for the built mainline kernel: https://bugzilla.kernel.org/attachment.cgi?id=308467 More information: OS Distribution: Arch Linux Linux build information from /proc/version: Linux version 6.16.0linux-mainline-11853-g21be711c0235 (tal@arch-debug) (gcc (GCC) 15.1.1 20250729, GNU ld (GNU Binutils) 2.45.0) #3 SMP PREEMPT_DYNAMIC OpenWRT Version on my Router: 24.10.2 Laptop Hardware: - Lenovo IdeaPad Slim 15 16AKP10 laptop (x86_64 Ryzen AI 350 CPU) - Network device as reported by lscpi: 14c3:7925 - Network modules and driver in use: mt7925e - mediatek chip firmware as of dmesg: HW/SW Version: 0x8a108a10, Build Time: 20250526152947a WM Firmware Version: ____000000, Build Time: 20250526153043 Referencing regzbot: #regzbot introduced: 80007d3f92fd018d0a052a706400e976b36e3c87 Please let me know if any other information is needed, or if there is anything else that I can test on my end. Thanks, Tal Inbar

5 hours, 26 minutes

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2025