September 2025 - Linux-stable-mirror

[PATCH v2 0/4] nios2: Add architecture support for clone3

by Simon Schuster via B4 Relay

This series adds support for the clone3 system call to the nios2 architecture. This addresses the build-time warning "warning: clone3() entry point is missing, please fix" introduced in 505d66d1abfb9 ("clone3: drop __ARCH_WANT_SYS_CLONE3 macro"). The implementation passes the relevant clone3 tests of kselftest when applied on top of next-20250815: ./run_kselftest.sh TAP version 13 1..4 # selftests: clone3: clone3 ok 1 selftests: clone3: clone3 # selftests: clone3: clone3_clear_sighand ok 2 selftests: clone3: clone3_clear_sighand # selftests: clone3: clone3_set_tid ok 3 selftests: clone3: clone3_set_tid # selftests: clone3: clone3_cap_checkpoint_restore ok 4 selftests: clone3: clone3_cap_checkpoint_restore The series also includes a small patch to kernel/fork.c that ensures that clone_flags are passed correctly on architectures where unsigned long is insufficient to store the u64 clone_flags. It is marked as a fix for stable backporting. As requested, in v2, this series now further tries to correct this type error throughout the whole code base. Thus, it now touches a larger number of subsystems and all architectures. Therefore, another test was performed for ARCH=x86_64 (as a representative for 64-bit architectures). Here, the series builds cleanly without warnings on defconfig with CONFIG_SECURITY_APPARMOR=y and CONFIG_SECURITY_TOMOYO=y (to compile-check the LSM-related changes). The build further successfully passes testing/selftests/clone3 (with the patch from 20241105062948.1037011-1-zhouyuhang1010(a)163.com to prepare clone3_cap_checkpoint_restore for compatibility with the newer libcap version on my system). Is there any option to further preflight check this patch series via lkp/KernelCI/etc. for a broader test across architectures, or is this degree of testing sufficient to eventually get the series merged? N.B.: The series is not checkpatch clean right now: - include/linux/cred.h, include/linux/mnt_namespace.h: function definition arguments without identifier name - include/trace/events/task.h: space prohibited after that open parenthesis I did not fix these warnings to keep my changes minimal and reviewable, as the issues persist throughout the files and they were not introduced by me; I only followed the existing code style and just replaced the types. If desired, I'd be happy to make the changes in a potential v3, though. Signed-off-by: Simon Schuster <schuster.simon(a)siemens-energy.com> --- Changes in v2: - Introduce "Fixes:" and "Cc: stable(a)vger.kernel.org" where necessary - Factor out "Fixes:" when adapting the datatype of clone_flags for easier backports - Fix additional instances where `unsigned long` clone_flags is used - Reword commit message to make it clearer that any 32-bit arch is affected by this bug - Link to v1: https://lore.kernel.org/r/20250821-nios2-implement-clone3-v1-0-1bb24017376a… --- Simon Schuster (4): copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64) copy_process: pass clone_flags as u64 across calltree arch: copy_thread: pass clone_flags as u64 nios2: implement architecture-specific portion of sys_clone3 arch/alpha/kernel/process.c | 2 +- arch/arc/kernel/process.c | 2 +- arch/arm/kernel/process.c | 2 +- arch/arm64/kernel/process.c | 2 +- arch/csky/kernel/process.c | 2 +- arch/hexagon/kernel/process.c | 2 +- arch/loongarch/kernel/process.c | 2 +- arch/m68k/kernel/process.c | 2 +- arch/microblaze/kernel/process.c | 2 +- arch/mips/kernel/process.c | 2 +- arch/nios2/include/asm/syscalls.h | 1 + arch/nios2/include/asm/unistd.h | 2 -- arch/nios2/kernel/entry.S | 6 ++++++ arch/nios2/kernel/process.c | 2 +- arch/nios2/kernel/syscall_table.c | 1 + arch/openrisc/kernel/process.c | 2 +- arch/parisc/kernel/process.c | 2 +- arch/powerpc/kernel/process.c | 2 +- arch/riscv/kernel/process.c | 2 +- arch/s390/kernel/process.c | 2 +- arch/sh/kernel/process_32.c | 2 +- arch/sparc/kernel/process_32.c | 2 +- arch/sparc/kernel/process_64.c | 2 +- arch/um/kernel/process.c | 2 +- arch/x86/include/asm/fpu/sched.h | 2 +- arch/x86/include/asm/shstk.h | 4 ++-- arch/x86/kernel/fpu/core.c | 2 +- arch/x86/kernel/process.c | 2 +- arch/x86/kernel/shstk.c | 2 +- arch/xtensa/kernel/process.c | 2 +- block/blk-ioc.c | 2 +- fs/namespace.c | 2 +- include/linux/cgroup.h | 4 ++-- include/linux/cred.h | 2 +- include/linux/iocontext.h | 6 +++--- include/linux/ipc_namespace.h | 4 ++-- include/linux/lsm_hook_defs.h | 2 +- include/linux/mnt_namespace.h | 2 +- include/linux/nsproxy.h | 2 +- include/linux/pid_namespace.h | 4 ++-- include/linux/rseq.h | 4 ++-- include/linux/sched/task.h | 2 +- include/linux/security.h | 4 ++-- include/linux/sem.h | 4 ++-- include/linux/time_namespace.h | 4 ++-- include/linux/uprobes.h | 4 ++-- include/linux/user_events.h | 4 ++-- include/linux/utsname.h | 4 ++-- include/net/net_namespace.h | 4 ++-- include/trace/events/task.h | 6 +++--- ipc/namespace.c | 2 +- ipc/sem.c | 2 +- kernel/cgroup/namespace.c | 2 +- kernel/cred.c | 2 +- kernel/events/uprobes.c | 2 +- kernel/fork.c | 10 +++++----- kernel/nsproxy.c | 4 ++-- kernel/pid_namespace.c | 2 +- kernel/sched/core.c | 4 ++-- kernel/sched/fair.c | 2 +- kernel/sched/sched.h | 4 ++-- kernel/time/namespace.c | 2 +- kernel/utsname.c | 2 +- net/core/net_namespace.c | 2 +- security/apparmor/lsm.c | 2 +- security/security.c | 2 +- security/selinux/hooks.c | 2 +- security/tomoyo/tomoyo.c | 2 +- 68 files changed, 95 insertions(+), 89 deletions(-) --- base-commit: 1357b2649c026b51353c84ddd32bc963e8999603 change-id: 20250818-nios2-implement-clone3-7f252c20860b Best regards, -- Simon Schuster <schuster.simon(a)siemens-energy.com>

2 weeks, 6 days

4
5
0 0

[PATCH v2] mtd: nand: raw: atmel: Respect tAR, tCLR in read setup timing

by A. Sverdlin

From: Alexander Sverdlin <alexander.sverdlin(a)siemens.com> Having setup time 0 violates tAR, tCLR of some chips, for instance TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of 98 dc 90 15 76 ...). Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation [1], but it looks more appropriate to just calculate setup time properly. [1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/Applicatio… Cc: stable(a)vger.kernel.org Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Signed-off-by: Alexander Sverdlin <alexander.sverdlin(a)siemens.com> --- v2: - Cc'ed stable - reformatted atmel_smc_cs_conf_set_setup() call - rebased onto mtd/fixes drivers/mtd/nand/raw/atmel/nand-controller.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index dedcca87defc7..ad0eff385e123 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -1377,14 +1377,24 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, if (ret) return ret; + /* + * Read setup timing depends on the operation done on the NAND: + * + * NRD_SETUP = max(tAR, tCLR) + */ + timeps = max(conf->timings.sdr.tAR_min, conf->timings.sdr.tCLR_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NRD_SHIFT, ncycles); + if (ret) + return ret; + /* * The read cycle timing is directly matching tRC, but is also * dependent on the setup and hold timings we calculated earlier, * which gives: * - * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) - * - * NRD_SETUP is always 0. + * NRD_CYCLE = max(tRC, NRD_SETUP + NRD_PULSE + NRD_HOLD) */ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); ncycles = max(totalcycles, ncycles); -- 2.50.1

2 weeks, 6 days

4
6
0 0

[PATCH] mtd: rawnand: stm32_fmc2: fix ECC overwrite

by Christophe Kerello

In case OOB write is requested during a data write, ECC is currently lost. Avoid this issue by only writing in the free spare area. This issue has been seen with a YAFFS2 file system. Signed-off-by: Christophe Kerello <christophe.kerello(a)foss.st.com> Cc: stable(a)vger.kernel.org Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") --- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index a960403081f11091837b73b8610231fe421d0c05..f84f23392fa441327bec90ba12a2a57d825d9330 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -996,9 +996,21 @@ static int stm32_fmc2_nfc_seq_write(struct nand_chip *chip, const u8 *buf, /* Write oob */ if (oob_required) { - ret = nand_change_write_column_op(chip, mtd->writesize, - chip->oob_poi, mtd->oobsize, - false); + unsigned int offset_in_page = mtd->writesize; + const void *buf = chip->oob_poi; + unsigned int len = mtd->oobsize; + + if (!raw) { + struct mtd_oob_region oob_free; + + mtd_ooblayout_free(mtd, 0, &oob_free); + offset_in_page += oob_free.offset; + buf += oob_free.offset; + len = oob_free.length; + } + + ret = nand_change_write_column_op(chip, offset_in_page, + buf, len, false); if (ret) return ret; } --- base-commit: fb2fae70e7e985c4acb1ad96110d8b98bb64a87c change-id: 20250811-fix-ecc-overwrite-9962b7797746 Best regards, -- Christophe Kerello <christophe.kerello(a)foss.st.com>

2 weeks, 6 days

2
1
0 0

[PATCH] mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC buffer

by Christophe Kerello

Avoid below overlapping mappings by using a contiguous non-cacheable buffer. [ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST, overlapping mappings aren't supported [ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300 [ 4.097071] Modules linked in: [ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1 [ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT) [ 4.118824] Workqueue: events_unbound deferred_probe_work_func [ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.131624] pc : add_dma_entry+0x23c/0x300 [ 4.135658] lr : add_dma_entry+0x23c/0x300 [ 4.139792] sp : ffff800009dbb490 [ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000 [ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8 [ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20 [ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006 [ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e [ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec [ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58 [ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000 [ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40 [ 4.214185] Call trace: [ 4.216605] add_dma_entry+0x23c/0x300 [ 4.220338] debug_dma_map_sg+0x198/0x350 [ 4.224373] __dma_map_sg_attrs+0xa0/0x110 [ 4.228411] dma_map_sg_attrs+0x10/0x2c [ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc [ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174 [ 4.242127] nand_read_oob+0x1d4/0x8e0 [ 4.245861] mtd_read_oob_std+0x58/0x84 [ 4.249596] mtd_read_oob+0x90/0x150 [ 4.253231] mtd_read+0x68/0xac Signed-off-by: Christophe Kerello <christophe.kerello(a)foss.st.com> Cc: stable(a)vger.kernel.org Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") --- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index a960403081f11091837b73b8610231fe421d0c05..222c3c3b684841879a55835e802dcf9983860c28 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -272,6 +272,7 @@ struct stm32_fmc2_nfc { struct sg_table dma_data_sg; struct sg_table dma_ecc_sg; u8 *ecc_buf; + dma_addr_t dma_ecc_addr; int dma_ecc_len; u32 tx_dma_max_burst; u32 rx_dma_max_burst; @@ -902,17 +903,10 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf, if (!write_data && !raw) { /* Configure DMA ECC status */ - p = nfc->ecc_buf; for_each_sg(nfc->dma_ecc_sg.sgl, sg, eccsteps, s) { - sg_set_buf(sg, p, nfc->dma_ecc_len); - p += nfc->dma_ecc_len; - } - - ret = dma_map_sg(nfc->dev, nfc->dma_ecc_sg.sgl, - eccsteps, dma_data_dir); - if (!ret) { - ret = -EIO; - goto err_unmap_data; + sg_dma_address(sg) = nfc->dma_ecc_addr + + s * nfc->dma_ecc_len; + sg_dma_len(sg) = nfc->dma_ecc_len; } desc_ecc = dmaengine_prep_slave_sg(nfc->dma_ecc_ch, @@ -921,7 +915,7 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf, DMA_PREP_INTERRUPT); if (!desc_ecc) { ret = -ENOMEM; - goto err_unmap_ecc; + goto err_unmap_data; } reinit_completion(&nfc->dma_ecc_complete); @@ -929,7 +923,7 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf, desc_ecc->callback_param = &nfc->dma_ecc_complete; ret = dma_submit_error(dmaengine_submit(desc_ecc)); if (ret) - goto err_unmap_ecc; + goto err_unmap_data; dma_async_issue_pending(nfc->dma_ecc_ch); } @@ -949,7 +943,7 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf, if (!write_data && !raw) dmaengine_terminate_all(nfc->dma_ecc_ch); ret = -ETIMEDOUT; - goto err_unmap_ecc; + goto err_unmap_data; } /* Wait DMA data transfer completion */ @@ -969,11 +963,6 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf, } } -err_unmap_ecc: - if (!write_data && !raw) - dma_unmap_sg(nfc->dev, nfc->dma_ecc_sg.sgl, - eccsteps, dma_data_dir); - err_unmap_data: dma_unmap_sg(nfc->dev, nfc->dma_data_sg.sgl, eccsteps, dma_data_dir); @@ -1610,7 +1599,8 @@ static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc) return ret; /* Allocate a buffer to store ECC status registers */ - nfc->ecc_buf = devm_kzalloc(nfc->dev, FMC2_MAX_ECC_BUF_LEN, GFP_KERNEL); + nfc->ecc_buf = dmam_alloc_coherent(nfc->dev, FMC2_MAX_ECC_BUF_LEN, + &nfc->dma_ecc_addr, GFP_KERNEL); if (!nfc->ecc_buf) return -ENOMEM; --- base-commit: fb2fae70e7e985c4acb1ad96110d8b98bb64a87c change-id: 20250811-fix-dma-overlapping-1c8fba7fd519 Best regards, -- Christophe Kerello <christophe.kerello(a)foss.st.com>

2 weeks, 6 days

2
1
0 0

UDF failures in 5.15

by Jan Kara

Hello, Henrik notified me that UDF in 5.15 kernel is failing for him, likely because commit 1ea1cd11c72d ("udf: Fix directory iteration for longer tail extents") is missing 5.15 stable tree. Basically wherever d16076d9b684b got backported, 1ea1cd11c72d needs to be backported as well (I'm sorry for forgetting to add proper Fixes tag back then). Honza -- Jan Kara <jack(a)suse.com> SUSE Labs, CR

2 weeks, 6 days

2
1
0 0

[PATCH] accel/ivpu: Prevent recovery work from being queued during device removal

by Jacek Lawrynowicz

From: Karol Wachowski <karol.wachowski(a)intel.com> Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini() to ensure that no new recovery work items can be queued after device removal has started. Previously, recovery work could be scheduled even after canceling existing work, potentially leading to use-after-free bugs if recovery accessed freed resources. Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better reflect its new behavior. Fixes: 58cde80f45a2 ("accel/ivpu: Use dedicated work for job timeout detection") Cc: <stable(a)vger.kernel.org> # v6.8+ Signed-off-by: Karol Wachowski <karol.wachowski(a)intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz(a)linux.intel.com> --- drivers/accel/ivpu/ivpu_drv.c | 2 +- drivers/accel/ivpu/ivpu_pm.c | 4 ++-- drivers/accel/ivpu/ivpu_pm.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c index 3d6d52492536a..3289751b47573 100644 --- a/drivers/accel/ivpu/ivpu_drv.c +++ b/drivers/accel/ivpu/ivpu_drv.c @@ -677,7 +677,7 @@ static void ivpu_bo_unbind_all_user_contexts(struct ivpu_device *vdev) static void ivpu_dev_fini(struct ivpu_device *vdev) { ivpu_jobs_abort_all(vdev); - ivpu_pm_cancel_recovery(vdev); + ivpu_pm_disable_recovery(vdev); ivpu_pm_disable(vdev); ivpu_prepare_for_reset(vdev); ivpu_shutdown(vdev); diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c index eacda1dbe8405..475ddc94f1cfe 100644 --- a/drivers/accel/ivpu/ivpu_pm.c +++ b/drivers/accel/ivpu/ivpu_pm.c @@ -417,10 +417,10 @@ void ivpu_pm_init(struct ivpu_device *vdev) ivpu_dbg(vdev, PM, "Autosuspend delay = %d\n", delay); } -void ivpu_pm_cancel_recovery(struct ivpu_device *vdev) +void ivpu_pm_disable_recovery(struct ivpu_device *vdev) { drm_WARN_ON(&vdev->drm, delayed_work_pending(&vdev->pm->job_timeout_work)); - cancel_work_sync(&vdev->pm->recovery_work); + disable_work_sync(&vdev->pm->recovery_work); } void ivpu_pm_enable(struct ivpu_device *vdev) diff --git a/drivers/accel/ivpu/ivpu_pm.h b/drivers/accel/ivpu/ivpu_pm.h index 89b264cc0e3e7..a2aa7a27f32ef 100644 --- a/drivers/accel/ivpu/ivpu_pm.h +++ b/drivers/accel/ivpu/ivpu_pm.h @@ -25,7 +25,7 @@ struct ivpu_pm_info { void ivpu_pm_init(struct ivpu_device *vdev); void ivpu_pm_enable(struct ivpu_device *vdev); void ivpu_pm_disable(struct ivpu_device *vdev); -void ivpu_pm_cancel_recovery(struct ivpu_device *vdev); +void ivpu_pm_disable_recovery(struct ivpu_device *vdev); int ivpu_pm_suspend_cb(struct device *dev); int ivpu_pm_resume_cb(struct device *dev); -- 2.45.1

2 weeks, 6 days

2
2
0 0

[PATCH v2] drm/rcar-du: dsi: Fix 1/2/3 lane support

by Marek Vasut

Remove fixed PPI lane count setup. The R-Car DSI host is capable of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane configuration from PPI register settings and instead configure the PPI lane count according to lane count information already obtained by this driver instance. Configure TXSETR register to match PPI lane count. The R-Car V4H Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set Register (TXSETR), field LANECNT description indicates that the TXSETR register LANECNT bitfield lane count must be configured such, that it matches lane count configuration in PPISETR register DLEN bitfield. Make sure the LANECNT and DLEN bitfields are configured to match. Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: David Airlie <airlied(a)gmail.com> Cc: Geert Uytterhoeven <geert+renesas(a)glider.be> Cc: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Cc: Magnus Damm <magnus.damm(a)gmail.com> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Simona Vetter <simona(a)ffwll.ch> Cc: Thomas Zimmermann <tzimmermann(a)suse.de> Cc: Tomi Valkeinen <tomi.valkeinen+renesas(a)ideasonboard.com> Cc: dri-devel(a)lists.freedesktop.org Cc: linux-renesas-soc(a)vger.kernel.org --- V2: - Split this out of a series, update commit message, combine from drm/rcar-du: dsi: Remove fixed PPI lane count setup drm/rcar-du: dsi: Configure TXSETR register to match PPI lane count - add Fixes tag, CC stable --- drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c | 5 ++++- drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h | 8 ++++---- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c index 1af4c73f7a88..952c3efb74da 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c @@ -576,7 +576,10 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, udelay(10); rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_UPDATEPLL); - ppisetr = PPISETR_DLEN_3 | PPISETR_CLEN; + rcar_mipi_dsi_clr(dsi, TXSETR, TXSETR_LANECNT_MASK); + rcar_mipi_dsi_set(dsi, TXSETR, dsi->lanes - 1); + + ppisetr = ((BIT(dsi->lanes) - 1) & PPISETR_DLEN_MASK) | PPISETR_CLEN; rcar_mipi_dsi_write(dsi, PPISETR, ppisetr); rcar_mipi_dsi_set(dsi, PHYSETUP, PHYSETUP_SHUTDOWNZ); diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h index a6b276f1d6ee..a54c7eb4113b 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h @@ -12,6 +12,9 @@ #define LINKSR_LPBUSY (1 << 1) #define LINKSR_HSBUSY (1 << 0) +#define TXSETR 0x100 +#define TXSETR_LANECNT_MASK (0x3 << 0) + /* * Video Mode Register */ @@ -80,10 +83,7 @@ * PHY-Protocol Interface (PPI) Registers */ #define PPISETR 0x700 -#define PPISETR_DLEN_0 (0x1 << 0) -#define PPISETR_DLEN_1 (0x3 << 0) -#define PPISETR_DLEN_2 (0x7 << 0) -#define PPISETR_DLEN_3 (0xf << 0) +#define PPISETR_DLEN_MASK (0xf << 0) #define PPISETR_CLEN (1 << 8) #define PPICLCR 0x710 -- 2.47.2

2 weeks, 6 days

3
4
0 0

[PATCH] xtensa: simdisk: add input size check in proc_write_simdisk

by Miaoqian Lin

A malicious user could pass an arbitrarily bad value to memdup_user_nul(), potentially causing kernel crash. This follows the same pattern as commit ee76746387f6 ("netdevsim: prevent bad user input in nsim_dev_health_break_write()") Fixes: b6c7e873daf7 ("xtensa: ISS: add host file-based simulated disk") Fixes: 16e5c1fc3604 ("convert a bunch of open-coded instances of memdup_user_nul()") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- arch/xtensa/platforms/iss/simdisk.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c index 6ed009318d24..3cafc8feddee 100644 --- a/arch/xtensa/platforms/iss/simdisk.c +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -231,10 +231,14 @@ static ssize_t proc_read_simdisk(struct file *file, char __user *buf, static ssize_t proc_write_simdisk(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - char *tmp = memdup_user_nul(buf, count); + char *tmp; struct simdisk *dev = pde_data(file_inode(file)); int err; + if (count == 0 || count > PAGE_SIZE) + return -EINVAL; + + tmp = memdup_user_nul(buf, count); if (IS_ERR(tmp)) return PTR_ERR(tmp); -- 2.35.1

2 weeks, 6 days

2
1
0 0

[PATCH v4] mm: slub: avoid wake up kswapd in set_track_prepare

by yangshiguang1011＠163.com

From: yangshiguang <yangshiguang(a)xiaomi.com> From: yangshiguang <yangshiguang(a)xiaomi.com> set_track_prepare() can incur lock recursion. The issue is that it is called from hrtimer_start_range_ns holding the per_cpu(hrtimer_bases)[n].lock, but when enabled CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare, and try to hold the per_cpu(hrtimer_bases)[n].lock. Avoid deadlock caused by implicitly waking up kswapd by passing in allocation flags. And the slab caller context has preemption disabled, so __GFP_KSWAPD_RECLAIM must not appear in gfp_flags. The oops looks something like: BUG: spinlock recursion on CPU#3, swapper/3/0 lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3 Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT) Call trace: spin_bug+0x0 _raw_spin_lock_irqsave+0x80 hrtimer_try_to_cancel+0x94 task_contending+0x10c enqueue_dl_entity+0x2a4 dl_server_start+0x74 enqueue_task_fair+0x568 enqueue_task+0xac do_activate_task+0x14c ttwu_do_activate+0xcc try_to_wake_up+0x6c8 default_wake_function+0x20 autoremove_wake_function+0x1c __wake_up+0xac wakeup_kswapd+0x19c wake_all_kswapds+0x78 __alloc_pages_slowpath+0x1ac __alloc_pages_noprof+0x298 stack_depot_save_flags+0x6b0 stack_depot_save+0x14 set_track_prepare+0x5c ___slab_alloc+0xccc __kmalloc_cache_noprof+0x470 __set_page_owner+0x2bc post_alloc_hook[jt]+0x1b8 prep_new_page+0x28 get_page_from_freelist+0x1edc __alloc_pages_noprof+0x13c alloc_slab_page+0x244 allocate_slab+0x7c ___slab_alloc+0x8e8 kmem_cache_alloc_noprof+0x450 debug_objects_fill_pool+0x22c debug_object_activate+0x40 enqueue_hrtimer[jt]+0xdc hrtimer_start_range_ns+0x5f8 ... Signed-off-by: yangshiguang <yangshiguang(a)xiaomi.com> Fixes: 5cf909c553e9 ("mm/slub: use stackdepot to save stack trace in objects") Cc: stable(a)vger.kernel.org --- v1 -> v2: propagate gfp flags to set_track_prepare() v2 -> v3: Remove the gfp restriction in set_track_prepare() v3 -> v4: Re-describe the comments in set_track_prepare. [1]https://lore.kernel.org/all/20250801065121.876793-1-yangshiguang1011@163.… [2]https://lore.kernel.org/all/20250814111641.380629-2-yangshiguang1011@163.… [3]https://lore.kernel.org/all/20250825121737.2535732-1-yangshiguang1011@163… --- mm/slub.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 30003763d224..b0af51a5321b 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -962,19 +962,25 @@ static struct track *get_track(struct kmem_cache *s, void *object, } #ifdef CONFIG_STACKDEPOT -static noinline depot_stack_handle_t set_track_prepare(void) +static noinline depot_stack_handle_t set_track_prepare(gfp_t gfp_flags) { depot_stack_handle_t handle; unsigned long entries[TRACK_ADDRS_COUNT]; unsigned int nr_entries; + /* + * Preemption is disabled in ___slab_alloc() so we need to disallow + * blocking. The flags are further adjusted by gfp_nested_mask() in + * stack_depot itself. + */ + gfp_flags &= ~(__GFP_DIRECT_RECLAIM); nr_entries = stack_trace_save(entries, ARRAY_SIZE(entries), 3); - handle = stack_depot_save(entries, nr_entries, GFP_NOWAIT); + handle = stack_depot_save(entries, nr_entries, gfp_flags); return handle; } #else -static inline depot_stack_handle_t set_track_prepare(void) +static inline depot_stack_handle_t set_track_prepare(gfp_t gfp_flags) { return 0; } @@ -996,9 +1002,9 @@ static void set_track_update(struct kmem_cache *s, void *object, } static __always_inline void set_track(struct kmem_cache *s, void *object, - enum track_item alloc, unsigned long addr) + enum track_item alloc, unsigned long addr, gfp_t gfp_flags) { - depot_stack_handle_t handle = set_track_prepare(); + depot_stack_handle_t handle = set_track_prepare(gfp_flags); set_track_update(s, object, alloc, addr, handle); } @@ -1921,9 +1927,9 @@ static inline bool free_debug_processing(struct kmem_cache *s, static inline void slab_pad_check(struct kmem_cache *s, struct slab *slab) {} static inline int check_object(struct kmem_cache *s, struct slab *slab, void *object, u8 val) { return 1; } -static inline depot_stack_handle_t set_track_prepare(void) { return 0; } +static inline depot_stack_handle_t set_track_prepare(gfp_t gfp_flags) { return 0; } static inline void set_track(struct kmem_cache *s, void *object, - enum track_item alloc, unsigned long addr) {} + enum track_item alloc, unsigned long addr, gfp_t gfp_flags) {} static inline void add_full(struct kmem_cache *s, struct kmem_cache_node *n, struct slab *slab) {} static inline void remove_full(struct kmem_cache *s, struct kmem_cache_node *n, @@ -3878,7 +3884,7 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node, * tracking info and return the object. */ if (s->flags & SLAB_STORE_USER) - set_track(s, freelist, TRACK_ALLOC, addr); + set_track(s, freelist, TRACK_ALLOC, addr, gfpflags); return freelist; } @@ -3910,7 +3916,7 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node, goto new_objects; if (s->flags & SLAB_STORE_USER) - set_track(s, freelist, TRACK_ALLOC, addr); + set_track(s, freelist, TRACK_ALLOC, addr, gfpflags); return freelist; } @@ -4422,7 +4428,7 @@ static noinline void free_to_partial_list( depot_stack_handle_t handle = 0; if (s->flags & SLAB_STORE_USER) - handle = set_track_prepare(); + handle = set_track_prepare(__GFP_NOWARN); spin_lock_irqsave(&n->list_lock, flags); -- 2.43.0

2 weeks, 6 days

4
6
0 0

[PATCH] fbdev/simplefb: Fix use after free in simplefb_detach_genpds()

by Janne Grunau

The pm_domain cleanup can not be devres managed as it uses struct simplefb_par which is allocated within struct fb_info by framebuffer_alloc(). This allocation is explicitly freed by unregister_framebuffer() in simplefb_remove(). Devres managed cleanup runs after the device remove call and thus can no longer access struct simplefb_par. Call simplefb_detach_genpds() explicitly from simplefb_destroy() like the cleanup functions for clocks and regulators. Fixes an use after free on M2 Mac mini during aperture_remove_conflicting_devices() using the downstream asahi kernel with Debian's kernel config. For unknown reasons this started to consistently dereference an invalid pointer in v6.16.3 based kernels. [ 6.736134] BUG: KASAN: slab-use-after-free in simplefb_detach_genpds+0x58/0x220 [ 6.743545] Read of size 4 at addr ffff8000304743f0 by task (udev-worker)/227 [ 6.750697] [ 6.752182] CPU: 6 UID: 0 PID: 227 Comm: (udev-worker) Tainted: G S 6.16.3-asahi+ #16 PREEMPTLAZY [ 6.752186] Tainted: [S]=CPU_OUT_OF_SPEC [ 6.752187] Hardware name: Apple Mac mini (M2, 2023) (DT) [ 6.752189] Call trace: [ 6.752190] show_stack+0x34/0x98 (C) [ 6.752194] dump_stack_lvl+0x60/0x80 [ 6.752197] print_report+0x17c/0x4d8 [ 6.752201] kasan_report+0xb4/0x100 [ 6.752206] __asan_report_load4_noabort+0x20/0x30 [ 6.752209] simplefb_detach_genpds+0x58/0x220 [ 6.752213] devm_action_release+0x50/0x98 [ 6.752216] release_nodes+0xd0/0x2c8 [ 6.752219] devres_release_all+0xfc/0x178 [ 6.752221] device_unbind_cleanup+0x28/0x168 [ 6.752224] device_release_driver_internal+0x34c/0x470 [ 6.752228] device_release_driver+0x20/0x38 [ 6.752231] bus_remove_device+0x1b0/0x380 [ 6.752234] device_del+0x314/0x820 [ 6.752238] platform_device_del+0x3c/0x1e8 [ 6.752242] platform_device_unregister+0x20/0x50 [ 6.752246] aperture_detach_platform_device+0x1c/0x30 [ 6.752250] aperture_detach_devices+0x16c/0x290 [ 6.752253] aperture_remove_conflicting_devices+0x34/0x50 ... [ 6.752343] [ 6.967409] Allocated by task 62: [ 6.970724] kasan_save_stack+0x3c/0x70 [ 6.974560] kasan_save_track+0x20/0x40 [ 6.978397] kasan_save_alloc_info+0x40/0x58 [ 6.982670] __kasan_kmalloc+0xd4/0xd8 [ 6.986420] __kmalloc_noprof+0x194/0x540 [ 6.990432] framebuffer_alloc+0xc8/0x130 [ 6.994444] simplefb_probe+0x258/0x2378 ... [ 7.054356] [ 7.055838] Freed by task 227: [ 7.058891] kasan_save_stack+0x3c/0x70 [ 7.062727] kasan_save_track+0x20/0x40 [ 7.066565] kasan_save_free_info+0x4c/0x80 [ 7.070751] __kasan_slab_free+0x6c/0xa0 [ 7.074675] kfree+0x10c/0x380 [ 7.077727] framebuffer_release+0x5c/0x90 [ 7.081826] simplefb_destroy+0x1b4/0x2c0 [ 7.085837] put_fb_info+0x98/0x100 [ 7.089326] unregister_framebuffer+0x178/0x320 [ 7.093861] simplefb_remove+0x3c/0x60 [ 7.097611] platform_remove+0x60/0x98 [ 7.101361] device_remove+0xb8/0x160 [ 7.105024] device_release_driver_internal+0x2fc/0x470 [ 7.110256] device_release_driver+0x20/0x38 [ 7.114529] bus_remove_device+0x1b0/0x380 [ 7.118628] device_del+0x314/0x820 [ 7.122116] platform_device_del+0x3c/0x1e8 [ 7.126302] platform_device_unregister+0x20/0x50 [ 7.131012] aperture_detach_platform_device+0x1c/0x30 [ 7.136157] aperture_detach_devices+0x16c/0x290 [ 7.140779] aperture_remove_conflicting_devices+0x34/0x50 ... Reported-by: Daniel Huhardeaux <tech(a)tootai.net> Cc: stable(a)vger.kernel.org Fixes: 92a511a568e44 ("fbdev/simplefb: Add support for generic power-domains") Signed-off-by: Janne Grunau <j(a)jannau.net> --- drivers/video/fbdev/simplefb.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c index 1893815dc67f4c1403eea42c0e10a7ead4d96ba9..cd5193e704ffe1ccc178c13916a462446af9cb14 100644 --- a/drivers/video/fbdev/simplefb.c +++ b/drivers/video/fbdev/simplefb.c @@ -93,6 +93,7 @@ struct simplefb_par { static void simplefb_clocks_destroy(struct simplefb_par *par); static void simplefb_regulators_destroy(struct simplefb_par *par); +static void simplefb_detach_genpds(void *res); /* * fb_ops.fb_destroy is called by the last put_fb_info() call at the end @@ -105,6 +106,7 @@ static void simplefb_destroy(struct fb_info *info) simplefb_regulators_destroy(info->par); simplefb_clocks_destroy(info->par); + simplefb_detach_genpds(info->par); if (info->screen_base) iounmap(info->screen_base); @@ -465,13 +467,11 @@ static int simplefb_attach_genpds(struct simplefb_par *par, return err; } - par->num_genpds = err; - /* * Single power-domain devices are handled by the driver core, so * nothing to do here. */ - if (par->num_genpds <= 1) + if (err <= 1) return 0; par->genpds = devm_kcalloc(dev, par->num_genpds, sizeof(*par->genpds), @@ -485,6 +485,12 @@ static int simplefb_attach_genpds(struct simplefb_par *par, if (!par->genpd_links) return -ENOMEM; + /* + * Set num_genpds only after genpds and genpd_links are allocated to + * exit early from simplefb_detach_genpds() without full initialisation. + */ + par->num_genpds = err; + for (i = 0; i < par->num_genpds; i++) { par->genpds[i] = dev_pm_domain_attach_by_id(dev, i); if (IS_ERR(par->genpds[i])) { @@ -506,9 +512,10 @@ static int simplefb_attach_genpds(struct simplefb_par *par, dev_warn(dev, "failed to link power-domain %u\n", i); } - return devm_add_action_or_reset(dev, simplefb_detach_genpds, par); + return 0; } #else +static void simplefb_detach_genpds(void *res) { } static int simplefb_attach_genpds(struct simplefb_par *par, struct platform_device *pdev) { --- base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585 change-id: 20250901-simplefb-genpd-uaf-352704761a29 Best regards, -- Janne Grunau <j(a)jannau.net>

2 weeks, 6 days

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2025