Since virtio-ccw doesn't work with accessing to the config space
inside an interrupt context, this patch series avoids that issue by
moving the config register accesses to the related workqueue contexts.
v3->v4 ChangeLog:
- change virtio32_to_cpu to cpu_to_virtio_32 in send_cmd_id_start;
v2->v3 ChangeLog:
- rename cmd_id_received to cmd_id_received_cache, and have call sites
read the latest value via virtio_balloon_cmd_id_received. (Still
kept Cornelia and Halil's reviewed-by as it's a minor change)
- remove zeroing vb->num_free_page_blocks in probe since vb is
allocated via kzalloc.
v1->v2 ChangeLog:
- add config_read_bitmap to indicate to the workqueue callbacks about
the necessity of reading the related config fields.
Wei Wang (3):
virtio-balloon: tweak config_changed implementation
virtio-balloon: improve update_balloon_size_func
virtio_balloon: remove the unnecessary 0-initialization
drivers/virtio/virtio_balloon.c | 104 ++++++++++++++++++++++++++--------------
1 file changed, 69 insertions(+), 35 deletions(-)
--
2.7.4
This is an ugly one unfortunately. Currently, all DRM drivers supporting
atomic modesetting will save the state that userspace had set before
suspending, then attempt to restore that state on resume. This probably
worked very well at one point, like many other things, until DP MST came
into the picture. While it's easy to restore state on normal display
connectors that were disconnected during suspend regardless of their
state post-resume, this can't really be done with MST because of the
fact that setting up a downstream sink requires performing sideband
transactions between the source and the MST hub, sending out the ACT
packets, etc.
Because of this, there isn't really a guarantee that we can restore the
atomic state we had before suspend once we've resumed. This sucks pretty
bad, but so far I haven't run into any compositors that this actually
causes serious issues with. Most compositors will notice the hotplug we
send afterwards, and then reprobe state.
Since nouveau and i915 also don't fail the suspend/resume process due to
failing to restore the atomic state, let's make amdgpu match this
behavior. Better to resume the GPU properly, then to stop the process
half way because of a potentially unavoidable atomic commit failure.
Eventually, we'll have a real fix for this problem on the DRM level. But
we've got some more important low-hanging fruit to deal with first.
Signed-off-by: Lyude Paul <lyude(a)redhat.com>
Cc: Jerry Zuo <Jerry.Zuo(a)amd.com>
Cc: <stable(a)vger.kernel.org> # v4.15+
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 3f326a2c513b..a3e65e457348 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -912,7 +912,6 @@ static int dm_resume(void *handle)
struct drm_plane_state *new_plane_state;
struct dm_plane_state *dm_new_plane_state;
enum dc_connection_type new_connection_type = dc_connection_none;
- int ret;
int i;
/* power on hardware */
@@ -985,13 +984,13 @@ static int dm_resume(void *handle)
}
}
- ret = drm_atomic_helper_resume(ddev, dm->cached_state);
+ drm_atomic_helper_resume(ddev, dm->cached_state);
dm->cached_state = NULL;
amdgpu_dm_irq_resume_late(adev);
- return ret;
+ return 0;
}
/**
--
2.20.1
drm_dp_mst_topology_mgr_resume() returns whether or not it managed to
find the topology in question after a suspend resume cycle, and the
driver is supposed to check this value and disable MST accordingly if
it's gone-in addition to sending a hotplug in order to notify userspace
that something changed during suspend.
Currently, amdgpu just makes the mistake of ignoring the return code
from drm_dp_mst_topology_mgr_resume() which means that if a topology was
removed in suspend, amdgpu never notices and assumes it's still
connected which leads to all sorts of problems.
So, fix this by actually checking the rc from
drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the
function while we're at it to fix the over-indenting.
Signed-off-by: Lyude Paul <lyude(a)redhat.com>
Cc: Jerry Zuo <Jerry.Zuo(a)amd.com>
Cc: <stable(a)vger.kernel.org> # v4.15+
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 32 +++++++++++++------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 8a626d16e8e3..3f326a2c513b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -699,22 +699,36 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
{
struct amdgpu_dm_connector *aconnector;
struct drm_connector *connector;
+ struct drm_dp_mst_topology_mgr *mgr;
+ int ret;
+ bool need_hotplug = false;
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- aconnector = to_amdgpu_dm_connector(connector);
- if (aconnector->dc_link->type == dc_connection_mst_branch &&
- !aconnector->mst_port) {
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ head) {
+ aconnector = to_amdgpu_dm_connector(connector);
+ if (aconnector->dc_link->type != dc_connection_mst_branch ||
+ aconnector->mst_port)
+ continue;
+
+ mgr = &aconnector->mst_mgr;
- if (suspend)
- drm_dp_mst_topology_mgr_suspend(&aconnector->mst_mgr);
- else
- drm_dp_mst_topology_mgr_resume(&aconnector->mst_mgr);
- }
+ if (suspend) {
+ drm_dp_mst_topology_mgr_suspend(mgr);
+ } else {
+ ret = drm_dp_mst_topology_mgr_resume(mgr);
+ if (ret < 0) {
+ drm_dp_mst_topology_mgr_set_mst(mgr, false);
+ need_hotplug = true;
+ }
+ }
}
drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+ if (need_hotplug)
+ drm_kms_helper_hotplug_event(dev);
}
/**
--
2.20.1
The patch
ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 667e9334fa64da2273e36ce131b05ac9e47c5769 Mon Sep 17 00:00:00 2001
From: b-ak <anur.bhargav(a)gmail.com>
Date: Mon, 7 Jan 2019 22:30:22 +0530
Subject: [PATCH] ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby
mode
During the bootup of the kernel, the DAPM bias level is in the OFF
state. As soon as the DAPM framework kicks in it pushes the codec
into STANDBY state.
The probe function doesn't prepare the clock, and STANDBY state
does a clk_disable_unprepare() without checking the previous state.
This leads to an OOPS.
Not transitioning from an OFF state to the STANDBY state fixes the
problem.
Signed-off-by: b-ak <anur.bhargav(a)gmail.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Cc: stable(a)vger.kernel.org
---
sound/soc/codecs/tlv320aic32x4.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index e2b5a11b16d1..f03195d2ab2e 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -822,6 +822,10 @@ static int aic32x4_set_bias_level(struct snd_soc_component *component,
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
+ /* Initial cold start */
+ if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF)
+ break;
+
/* Switch off BCLK_N Divider */
snd_soc_component_update_bits(component, AIC32X4_BCLKN,
AIC32X4_BCLKEN, 0);
--
2.20.1
The patch
ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 44fabd8cdaaa3acb80ad2bb3b5c61ae2136af661 Mon Sep 17 00:00:00 2001
From: Kangjie Lu <kjlu(a)umn.edu>
Date: Tue, 25 Dec 2018 20:29:48 -0600
Subject: [PATCH] ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
snd_pcm_lib_malloc_pages() may fail, so let's check its status and
return its error code upstream.
Signed-off-by: Kangjie Lu <kjlu(a)umn.edu>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Cc: stable(a)vger.kernel.org
---
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index afc559866095..91a2436ce952 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -399,7 +399,13 @@ static int sst_media_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+ int ret;
+
+ ret =
+ snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(params));
+ if (ret)
+ return ret;
memset(substream->runtime->dma_area, 0, params_buffer_bytes(params));
return 0;
}
--
2.20.1
Hi,
On Wed, Jan 2, 2019 at 4:11 PM Matthias Kaehlcke <mka(a)chromium.org> wrote:
>
> With commit e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket
> atomically") lock_sock[_nested]() is used to acquire the socket lock
> before manipulating the socket. lock_sock[_nested]() may block, which
> is problematic since bt_accept_enqueue() can be called in bottom half
> context (e.g. from rfcomm_connect_ind()):
>
> [<ffffff80080d81ec>] __might_sleep+0x4c/0x80
> [<ffffff800876c7b0>] lock_sock_nested+0x24/0x58
> [<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth]
> [<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm]
>
> Add a parameter to bt_accept_enqueue() to indicate whether the
> function is called from BH context, and acquire the socket lock
> with bh_lock_sock_nested() if that's the case.
>
> Also adapt all callers of bt_accept_enqueue() to pass the new
> parameter:
>
> - l2cap_sock_new_connection_cb()
> - uses lock_sock() to lock the parent socket => process context
>
> - rfcomm_connect_ind()
> - acquires the parent socket lock with bh_lock_sock() => BH
> context
>
> - __sco_chan_add()
> - called from sco_chan_add(), which is called from sco_connect().
> parent is NULL, hence bt_accept_enqueue() isn't called in this
> code path and we can ignore it
> - also called from sco_conn_ready(). uses bh_lock_sock() to acquire
> the parent lock => BH context
>
> Fixes: e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically")
> Signed-off-by: Matthias Kaehlcke <mka(a)chromium.org>
> ---
> Changes in v2:
> - use parameter in bt_accept_enqueue() to decide which lock to
> acquire and adapt all callers
> - updated commit message
> ---
> include/net/bluetooth/bluetooth.h | 2 +-
> net/bluetooth/af_bluetooth.c | 16 +++++++++++++---
> net/bluetooth/l2cap_sock.c | 2 +-
> net/bluetooth/rfcomm/sock.c | 2 +-
> net/bluetooth/sco.c | 2 +-
> 5 files changed, 17 insertions(+), 7 deletions(-)
This looks nice to me, thanks!
Cc: stable(a)vger.kernel.org
Reviewed-by: Douglas Anderson <dianders(a)chromium.org>
This is an automatic generated email to let you know that the following patch were queued:
Subject: media: lgdt330x: fix lock status reporting
Author: French, Nicholas A <naf(a)ou.edu>
Date: Sun Dec 9 02:11:18 2018 -0500
A typo in code cleanup commit db9c1007bc07 ("media: lgdt330x: do
some cleanups at status logic") broke the FE_HAS_LOCK reporting
for 3303 chips by inadvertently modifying the register mask.
The broken lock status is critial as it prevents video capture
cards from reporting signal strength, scanning for channels,
and capturing video.
Fix regression by reverting mask change.
Cc: stable(a)vger.kernel.org # Kernel 4.17+
Fixes: db9c1007bc07 ("media: lgdt330x: do some cleanups at status logic")
Signed-off-by: Nick French <naf(a)ou.edu>
Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
Tested-by: Adam Stylinski <kungfujesus06(a)gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung(a)kernel.org>
drivers/media/dvb-frontends/lgdt330x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
---
diff --git a/drivers/media/dvb-frontends/lgdt330x.c b/drivers/media/dvb-frontends/lgdt330x.c
index 96807e134886..8abb1a510a81 100644
--- a/drivers/media/dvb-frontends/lgdt330x.c
+++ b/drivers/media/dvb-frontends/lgdt330x.c
@@ -783,7 +783,7 @@ static int lgdt3303_read_status(struct dvb_frontend *fe,
if ((buf[0] & 0x02) == 0x00)
*status |= FE_HAS_SYNC;
- if ((buf[0] & 0xfd) == 0x01)
+ if ((buf[0] & 0x01) == 0x01)
*status |= FE_HAS_VITERBI | FE_HAS_LOCK;
break;
default: