- Linux-stable-mirror - lists.linaro.org

[PATCH 1/3] mtd: spinand: winbond: Fix W35N number of planes/LUN

by Miquel Raynal

There's been a mistake when extracting the geometry of the W35N02 and W35N04 chips from the datasheet. There is a single plane, however there are respectively 2 and 4 LUNs. They are actually referred in the datasheet as dies (equivalent of target), but as there is no die select operation and the chips only feature a single configuration register for the entire chip (instead of one per die), we can reasonably assume we are talking about LUNs and not dies. Reported-by: Andreas Dannenberg <dannenberg(a)ti.com> Suggested-by: Vignesh Raghavendra <vigneshr(a)ti.com> Fixes: 25e08bf66660 ("mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips") Cc: stable(a)vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com> --- drivers/mtd/nand/spi/winbond.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index 19f8dd4a6370..2808bbd7a16e 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -289,7 +289,7 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL)), SPINAND_INFO("W35N02JW", /* 1.8V */ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdf, 0x22), - NAND_MEMORG(1, 4096, 128, 64, 512, 10, 2, 1, 1), + NAND_MEMORG(1, 4096, 128, 64, 512, 10, 1, 2, 1), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_octal_variants, &write_cache_octal_variants, @@ -298,7 +298,7 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL)), SPINAND_INFO("W35N04JW", /* 1.8V */ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdf, 0x23), - NAND_MEMORG(1, 4096, 128, 64, 512, 10, 4, 1, 1), + NAND_MEMORG(1, 4096, 128, 64, 512, 10, 1, 4, 1), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_octal_variants, &write_cache_octal_variants, -- 2.48.1

3 weeks, 4 days

1
0
0 0

[PATCH net] virtio-net: drop the multi-buffer XDP packet in zerocopy

by Bui Quang Minh

In virtio-net, we have not yet supported multi-buffer XDP packet in zerocopy mode when there is a binding XDP program. However, in that case, when receiving multi-buffer XDP packet, we skip the XDP program and return XDP_PASS. As a result, the packet is passed to normal network stack which is an incorrect behavior. This commit instead returns XDP_DROP in that case. Fixes: 99c861b44eb1 ("virtio_net: xsk: rx: support recv merge mode") Cc: stable(a)vger.kernel.org Signed-off-by: Bui Quang Minh <minhquangbui99(a)gmail.com> --- drivers/net/virtio_net.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index e53ba600605a..4c35324d6e5b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1309,9 +1309,14 @@ static struct sk_buff *virtnet_receive_xsk_merge(struct net_device *dev, struct ret = XDP_PASS; rcu_read_lock(); prog = rcu_dereference(rq->xdp_prog); - /* TODO: support multi buffer. */ - if (prog && num_buf == 1) - ret = virtnet_xdp_handler(prog, xdp, dev, xdp_xmit, stats); + if (prog) { + /* TODO: support multi buffer. */ + if (num_buf == 1) + ret = virtnet_xdp_handler(prog, xdp, dev, xdp_xmit, + stats); + else + ret = XDP_DROP; + } rcu_read_unlock(); switch (ret) { -- 2.43.0

3 weeks, 4 days

6
14
0 0

[PATCH v2] leds: flash: leds-qcom-flash: Fix registry access after re-bind

by Krzysztof Kozlowski

Driver in probe() updates each of 'reg_field' with 'reg_base': for (i = 0; i < REG_MAX_COUNT; i++) regs[i].reg += reg_base; 'reg_field' array (under variable 'regs' above) is statically allocated, thus each re-bind would add another 'reg_base' leading to bogus register addresses. Constify the local 'reg_field' array and duplicate it in probe to solve this. Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Changes in v2: 1. Fix sizeof() argument (Fenglin Wu) This is a nice example why constifying static memory is useful. --- drivers/leds/flash/leds-qcom-flash.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c index b4c19be51c4d..89cf5120f5d5 100644 --- a/drivers/leds/flash/leds-qcom-flash.c +++ b/drivers/leds/flash/leds-qcom-flash.c @@ -117,7 +117,7 @@ enum { REG_MAX_COUNT, }; -static struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = { +static const struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = { REG_FIELD(0x08, 0, 7), /* status1 */ REG_FIELD(0x09, 0, 7), /* status2 */ REG_FIELD(0x0a, 0, 7), /* status3 */ @@ -132,7 +132,7 @@ static struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = { REG_FIELD(0x58, 0, 2), /* therm_thrsh3 */ }; -static struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = { +static const struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = { REG_FIELD(0x06, 0, 7), /* status1 */ REG_FIELD(0x07, 0, 6), /* status2 */ REG_FIELD(0x09, 0, 7), /* status3 */ @@ -854,11 +854,17 @@ static int qcom_flash_led_probe(struct platform_device *pdev) if (val == FLASH_SUBTYPE_3CH_PM8150_VAL || val == FLASH_SUBTYPE_3CH_PMI8998_VAL) { flash_data->hw_type = QCOM_MVFLASH_3CH; flash_data->max_channels = 3; - regs = mvflash_3ch_regs; + regs = devm_kmemdup(dev, mvflash_3ch_regs, sizeof(mvflash_3ch_regs), + GFP_KERNEL); + if (!regs) + return -ENOMEM; } else if (val == FLASH_SUBTYPE_4CH_VAL) { flash_data->hw_type = QCOM_MVFLASH_4CH; flash_data->max_channels = 4; - regs = mvflash_4ch_regs; + regs = devm_kmemdup(dev, mvflash_4ch_regs, sizeof(mvflash_4ch_regs), + GFP_KERNEL); + if (!regs) + return -ENOMEM; rc = regmap_read(regmap, reg_base + FLASH_REVISION_REG, &val); if (rc < 0) { @@ -880,6 +886,7 @@ static int qcom_flash_led_probe(struct platform_device *pdev) dev_err(dev, "Failed to allocate regmap field, rc=%d\n", rc); return rc; } + devm_kfree(dev, regs); /* devm_regmap_field_bulk_alloc() makes copies */ platform_set_drvdata(pdev, flash_data); mutex_init(&flash_data->lock); -- 2.45.2

3 weeks, 4 days

3
2
0 0

[PATCH v2] mfd: cros_ec: Separate charge-control probing from USB-PD

by Thomas Weißschuh

The charge-control subsystem in the ChromeOS EC is not strictly tied to its USB-PD subsystem. Since commit 7613bc0d116a ("mfd: cros_ec: Don't load charger with UCSI") the presence of EC_FEATURE_UCSI_PPM would inhibit the probing of the charge-control driver. Furthermore recent versions of the EC firmware in Framework laptops hard-disable EC_FEATURE_USB_PD to avoid probing cros-usbpd-charger, which then also breaks cros-charge-control. Instead use the dedicated EC_FEATURE_CHARGER. Link: https://github.com/FrameworkComputer/EmbeddedController/commit/1d7bcf1d5013… Fixes: 555b5fcdb844 ("mfd: cros_ec: Register charge control subdevice") Cc: stable(a)vger.kernel.org Tested-by: Tom Vincent <linux(a)tlvince.com> Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Rebase onto v6.16-rc1 - Pick up tested-by from Tom - Also Cc stable@ - Link to v1: https://lore.kernel.org/r/20250521-cros-ec-mfd-chctl-probe-v1-1-6ebfe3a6efa… --- drivers/mfd/cros_ec_dev.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index 9f84a52b48d6a8994d23edba999398684303ee64..dc80a272726bb16b58253418999021cd56dfd975 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -87,7 +87,6 @@ static const struct mfd_cell cros_ec_sensorhub_cells[] = { }; static const struct mfd_cell cros_usbpd_charger_cells[] = { - { .name = "cros-charge-control", }, { .name = "cros-usbpd-charger", }, { .name = "cros-usbpd-logger", }, }; @@ -112,6 +111,10 @@ static const struct mfd_cell cros_ec_ucsi_cells[] = { { .name = "cros_ec_ucsi", }, }; +static const struct mfd_cell cros_ec_charge_control_cells[] = { + { .name = "cros-charge-control", }, +}; + static const struct cros_feature_to_cells cros_subdevices[] = { { .id = EC_FEATURE_CEC, @@ -148,6 +151,11 @@ static const struct cros_feature_to_cells cros_subdevices[] = { .mfd_cells = cros_ec_keyboard_leds_cells, .num_cells = ARRAY_SIZE(cros_ec_keyboard_leds_cells), }, + { + .id = EC_FEATURE_CHARGER, + .mfd_cells = cros_ec_charge_control_cells, + .num_cells = ARRAY_SIZE(cros_ec_charge_control_cells), + }, }; static const struct mfd_cell cros_ec_platform_cells[] = { --- base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494 change-id: 20250521-cros-ec-mfd-chctl-probe-64a63ac9c160 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

3 weeks, 4 days

3
2
0 0

[PATCH v3 1/3] mm/huge_memory: don't ignore queried cachemode in vmf_insert_pfn_pud()

by David Hildenbrand

We setup the cache mode but ... don't forward the updated pgprot to insert_pfn_pud(). Only a problem on x86-64 PAT when mapping PFNs using PUDs that require a special cachemode. Fix it by using the proper pgprot where the cachemode was setup. It is unclear in which configurations we would get the cachemode wrong: through vfio seems possible. Getting cachemodes wrong is usually ... bad. As the fix is easy, let's backport it to stable. Identified by code inspection. Fixes: 7b806d229ef1 ("mm: remove vmf_insert_pfn_xxx_prot() for huge page-table entries") Reviewed-by: Dan Williams <dan.j.williams(a)intel.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Reviewed-by: Jason Gunthorpe <jgg(a)nvidia.com> Tested-by: Dan Williams <dan.j.williams(a)intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: David Hildenbrand <david(a)redhat.com> --- mm/huge_memory.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index d3e66136e41a3..49b98082c5401 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1516,10 +1516,9 @@ static pud_t maybe_pud_mkwrite(pud_t pud, struct vm_area_struct *vma) } static void insert_pfn_pud(struct vm_area_struct *vma, unsigned long addr, - pud_t *pud, pfn_t pfn, bool write) + pud_t *pud, pfn_t pfn, pgprot_t prot, bool write) { struct mm_struct *mm = vma->vm_mm; - pgprot_t prot = vma->vm_page_prot; pud_t entry; if (!pud_none(*pud)) { @@ -1581,7 +1580,7 @@ vm_fault_t vmf_insert_pfn_pud(struct vm_fault *vmf, pfn_t pfn, bool write) pfnmap_setup_cachemode_pfn(pfn_t_to_pfn(pfn), &pgprot); ptl = pud_lock(vma->vm_mm, vmf->pud); - insert_pfn_pud(vma, addr, vmf->pud, pfn, write); + insert_pfn_pud(vma, addr, vmf->pud, pfn, pgprot, write); spin_unlock(ptl); return VM_FAULT_NOPAGE; @@ -1625,7 +1624,7 @@ vm_fault_t vmf_insert_folio_pud(struct vm_fault *vmf, struct folio *folio, add_mm_counter(mm, mm_counter_file(folio), HPAGE_PUD_NR); } insert_pfn_pud(vma, addr, vmf->pud, pfn_to_pfn_t(folio_pfn(folio)), - write); + vma->vm_page_prot, write); spin_unlock(ptl); return VM_FAULT_NOPAGE; -- 2.49.0

3 weeks, 4 days

2
1
0 0

[PATCH v3] ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard

by Niklas Cassel

A user has bisected a regression which causes graphical corruptions on his screen to commit 7627a0edef54 ("ata: ahci: Drop low power policy board type"). Simply reverting commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") makes the graphical corruptions on his screen to go away. (Note: there are no visible messages in dmesg that indicates a problem with AHCI.) The user also reports that the problem occurs regardless if there is an HDD or an SSD connected via AHCI, so the problem is not device related. The devices also work fine on other motherboards, so it seems specific to the ASUSPRO-D840SA motherboard. While enabling low power modes for AHCI is not supposed to affect completely unrelated hardware, like a graphics card, it does however allow the system to enter deeper PC-states, which could expose ACPI issues that were previously not visible (because the system never entered these lower power states before). There are previous examples where enabling LPM exposed serious BIOS/ACPI bugs, see e.g. commit 240630e61870 ("ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS"). Since there hasn't been any BIOS update in years for the ASUSPRO-D840SA motherboard, disable LPM for this board, in order to avoid entering lower PC-states, which triggers graphical corruptions. Cc: stable(a)vger.kernel.org Reported-by: Andy Yang <andyybtc79(a)gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220111 Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Signed-off-by: Niklas Cassel <cassel(a)kernel.org> --- Changes since v2: -Rework how we handle the quirk so that we also quirk future BIOS versions unless a build date is explicitly added to driver_data. drivers/ata/ahci.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e7c8357cbc54..c8ad8ace7496 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1410,8 +1410,15 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) static bool ahci_broken_lpm(struct pci_dev *pdev) { + /* + * Platforms with LPM problems. + * If driver_data is NULL, there is no existing BIOS version with + * functioning LPM. + * If driver_data is non-NULL, then driver_data contains the DMI BIOS + * build date of the first BIOS version with functioning LPM (i.e. older + * BIOS versions have broken LPM). + */ static const struct dmi_system_id sysids[] = { - /* Various Lenovo 50 series have LPM issues with older BIOSen */ { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), @@ -1440,6 +1447,13 @@ static bool ahci_broken_lpm(struct pci_dev *pdev) }, .driver_data = "20180409", /* 2.35 */ }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_VERSION, "ASUSPRO D840MB_M840SA"), + }, + /* 320 is broken, there is no known good version yet. */ + }, { } /* terminate list */ }; const struct dmi_system_id *dmi = dmi_first_match(sysids); @@ -1449,6 +1463,9 @@ static bool ahci_broken_lpm(struct pci_dev *pdev) if (!dmi) return false; + if (!dmi->driver_data) + return true; + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); -- 2.49.0

3 weeks, 4 days

3
3
0 0

[PATCH] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64

by Ankit Nautiyal

DIV_ROUND_CLOSEST_ULL uses do_div(), which expects a 32-bit divisor. When passing a 64-bit constant like CURVE2_MULTIPLIER, the value is silently truncated to u32, potentially leading to incorrect results on large divisors. Replace DIV_ROUND_CLOSEST_ULL with div64_u64(), which correctly handles full 64-bit division. Since the result is clamped between 1 and 127, rounding is unnecessary and truncating division is sufficient. Fixes: 5947642004bf ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2") Cc: Ankit Nautiyal <ankit.k.nautiyal(a)intel.com> Cc: Suraj Kandpal <suraj.kandpal(a)intel.com> Cc: Jani Nikula <jani.nikula(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.15+ Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal(a)intel.com> --- drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.c b/drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.c index 74bb3bedf30f..ac609bdf6653 100644 --- a/drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.c +++ b/drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.c @@ -103,8 +103,8 @@ static void get_ana_cp_int_prop(u64 vco_clk, DIV_ROUND_DOWN_ULL(curve_1_interpolated, CURVE0_MULTIPLIER))); ana_cp_int_temp = - DIV_ROUND_CLOSEST_ULL(DIV_ROUND_DOWN_ULL(adjusted_vco_clk1, curve_2_scaled1), - CURVE2_MULTIPLIER); + div64_u64(DIV_ROUND_DOWN_ULL(adjusted_vco_clk1, curve_2_scaled1), + CURVE2_MULTIPLIER); *ana_cp_int = max(1, min(ana_cp_int_temp, 127)); -- 2.45.2

3 weeks, 4 days

3
2
0 0

Reply Request: UITP Summit - Hamburg 2025 Attendees List

by Michelle Calara

Hi, Following up on my primary email about the visitor list. Please let me know your thoughts, and I'd be happy to give more details. Best regards, Grace Subject: UITP Summit - Hamburg 2025! Hi, I wanted to check if you’d be interested in acquiring the attendees list of UITP Summit - Hamburg 2025? Event Overview: Dates: 15 - 18 Jun 2025 Location: Hamburg, Germany Attendees: 10,126 Exhibitors: 380 Each contact contains: Contact Name, First Name, Last Name, Job Title, Company, Website Address, City, State, Zip, Country Code, Revenue, Employee Size, Email, Phone Number, and Fax Number. If you're interested in the list, just reply "Send Counts and Cost"? Best regards, Michelle Calara Senior Marketing Manager To unsubscribe, simply respond with “Not interested.”

3 weeks, 4 days

1
0
0 0

[tip: perf/urgent] perf/x86/intel: Fix crash in icl_update_topdown_event()

by tip-bot2 for Kan Liang

The following commit has been merged into the perf/urgent branch of tip: Commit-ID: b0823d5fbacb1c551d793cbfe7af24e0d1fa45ed Gitweb: https://git.kernel.org/tip/b0823d5fbacb1c551d793cbfe7af24e0d1fa45ed Author: Kan Liang <kan.liang(a)linux.intel.com> AuthorDate: Thu, 12 Jun 2025 07:38:18 -07:00 Committer: Ingo Molnar <mingo(a)kernel.org> CommitterDate: Fri, 13 Jun 2025 09:38:06 +02:00 perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: <TASK> icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it. Fixes: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") Closes: https://lore.kernel.org/lkml/352f0709-f026-cd45-e60c-60dfd97f73f3@maine.edu/ Reported-by: Vince Weaver <vincent.weaver(a)maine.edu> Signed-off-by: Kan Liang <kan.liang(a)linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Tested-by: Vince Weaver <vincent.weaver(a)maine.edu> Cc: stable(a)vger.kernel.org # v6.15+ Link: https://lore.kernel.org/r/20250612143818.2889040-1-kan.liang@linux.intel.com --- arch/x86/events/intel/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 741b229..c2fb729 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -2826,7 +2826,7 @@ static void intel_pmu_read_event(struct perf_event *event) * If the PEBS counters snapshotting is enabled, * the topdown event is available in PEBS records. */ - if (is_topdown_event(event) && !is_pebs_counter_event_group(event)) + if (is_topdown_count(event) && !is_pebs_counter_event_group(event)) static_call(intel_pmu_update_topdown_event)(event, NULL); else intel_pmu_drain_pebs_buffer();

3 weeks, 4 days

1
0
0 0

[PATCH v2 0/6] media: ti, cdns: Multiple pixel support and misc fixes

by Jai Luthra

Hi, The first four patches in this series are miscellaneous fixes and improvements in the Cadence and TI CSI-RX drivers around probing, fwnode and link creation. The last two patches add support for transmitting multiple pixels per clock on the internal bus between Cadence CSI-RX bridge and TI CSI-RX wrapper. As this internal bus is 32-bit wide, the maximum number of pixels that can be transmitted per cycle depend upon the format's bit width. Secondly, the downstream element must support unpacking of multiple pixels. Thus we export a module function that can be used by the downstream driver to negotiate the pixels per cycle on the output pixel stream of the Cadence bridge. Signed-off-by: Jai Luthra <jai.luthra(a)ideasonboard.com> --- Changes in v2: - Rebase on v6.15-rc1 - Fix lkp warnings in PATCH 5/6 missing header for FIELD_PREP - Add R-By tags from Devarsh and Changhuang - Link to v1: https://lore.kernel.org/r/20250324-probe_fixes-v1-0-5cd5b9e1cfac@ideasonboa… --- Jai Luthra (6): media: ti: j721e-csi2rx: Use devm_of_platform_populate media: ti: j721e-csi2rx: Use fwnode_get_named_child_node media: ti: j721e-csi2rx: Fix source subdev link creation media: cadence: csi2rx: Implement get_fwnode_pad op media: cadence: cdns-csi2rx: Support multiple pixels per clock cycle media: ti: j721e-csi2rx: Support multiple pixels per clock drivers/media/platform/cadence/cdns-csi2rx.c | 76 +++++++++++++++++----- drivers/media/platform/cadence/cdns-csi2rx.h | 19 ++++++ drivers/media/platform/ti/Kconfig | 3 +- .../media/platform/ti/j721e-csi2rx/j721e-csi2rx.c | 66 ++++++++++++++----- 4 files changed, 129 insertions(+), 35 deletions(-) --- base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 change-id: 20250314-probe_fixes-7e0ec33c7fee Best regards, -- Jai Luthra <jai.luthra(a)ideasonboard.com>

3 weeks, 4 days

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror