- Linux-stable-mirror - lists.linaro.org

Patch "pwm: tegra: Increase precision in PWM rate calculation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pwm: tegra: Increase precision in PWM rate calculation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pwm-tegra-increase-precision-in-pwm-rate-calculation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Laxman Dewangan <ldewangan(a)nvidia.com> Date: Fri, 7 Apr 2017 15:04:00 +0530 Subject: pwm: tegra: Increase precision in PWM rate calculation From: Laxman Dewangan <ldewangan(a)nvidia.com> [ Upstream commit 250b76f43f57d578ebff5e7211eb2c73aa5cd6ca ] The rate of the PWM calculated as follows: hz = NSEC_PER_SEC / period_ns; rate = (rate + (hz / 2)) / hz; This has the precision loss in lower PWM rate. Change this to have more precision as: hz = DIV_ROUND_CLOSEST_ULL(NSEC_PER_SEC * 100, period_ns); rate = DIV_ROUND_CLOSEST(rate * 100, hz) Example: 1. period_ns = 16672000, PWM clock rate is 200 KHz. Based on old formula hz = NSEC_PER_SEC / period_ns = 1000000000ul/16672000 = 59 (59.98) rate = (200K + 59/2)/59 = 3390 Based on new method: hz = 5998 rate = DIV_ROUND_CLOSE(200000*100, 5998) = 3334 If we measure the PWM signal rate, we will get more accurate period with rate value of 3334 instead of 3390. 2. period_ns = 16803898, PWM clock rate is 200 KHz. Based on old formula: hz = 59, rate = 3390 Based on new formula: hz = 5951, rate = 3360 The PWM signal rate of 3360 is more near to requested period than 3333. Signed-off-by: Laxman Dewangan <ldewangan(a)nvidia.com> Signed-off-by: Thierry Reding <thierry.reding(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pwm/pwm-tegra.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -76,6 +76,7 @@ static int tegra_pwm_config(struct pwm_c struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); unsigned long long c = duty_ns; unsigned long rate, hz; + unsigned long long ns100 = NSEC_PER_SEC; u32 val = 0; int err; @@ -95,9 +96,11 @@ static int tegra_pwm_config(struct pwm_c * cycles at the PWM clock rate will take period_ns nanoseconds. */ rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH; - hz = NSEC_PER_SEC / period_ns; - rate = (rate + (hz / 2)) / hz; + /* Consider precision in PWM_SCALE_WIDTH rate calculation */ + ns100 *= 100; + hz = DIV_ROUND_CLOSEST_ULL(ns100, period_ns); + rate = DIV_ROUND_CLOSEST(rate * 100, hz); /* * Since the actual PWM divider is the register's frequency divider Patches currently in stable-queue which might be from ldewangan(a)nvidia.com are queue-4.9/pwm-tegra-increase-precision-in-pwm-rate-calculation.patch

7 years, 4 months

1
0
0 0

Patch "pwm: stmpe: Fix wrong register offset for hwpwm=2 case" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pwm: stmpe: Fix wrong register offset for hwpwm=2 case to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pwm-stmpe-fix-wrong-register-offset-for-hwpwm-2-case.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Axel Lin <axel.lin(a)ingics.com> Date: Tue, 7 Nov 2017 13:18:53 +0800 Subject: pwm: stmpe: Fix wrong register offset for hwpwm=2 case From: Axel Lin <axel.lin(a)ingics.com> [ Upstream commit 8472b529e113e0863ea064fdee51bf73c3f86fd6 ] Fix trivial copy/paste bug. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Fixes: ef1f09eca74a ("pwm: Add a driver for the STMPE PWM") Signed-off-by: Thierry Reding <thierry.reding(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pwm/pwm-stmpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/pwm/pwm-stmpe.c +++ b/drivers/pwm/pwm-stmpe.c @@ -145,7 +145,7 @@ static int stmpe_24xx_pwm_config(struct break; case 2: - offset = STMPE24XX_PWMIC1; + offset = STMPE24XX_PWMIC2; break; default: Patches currently in stable-queue which might be from axel.lin(a)ingics.com are queue-4.9/pwm-stmpe-fix-wrong-register-offset-for-hwpwm-2-case.patch

7 years, 4 months

1
0
0 0

Patch "printk: Correctly handle preemption in console_unlock()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled printk: Correctly handle preemption in console_unlock() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: printk-correctly-handle-preemption-in-console_unlock.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Petr Mladek <pmladek(a)suse.com> Date: Fri, 24 Mar 2017 17:14:05 +0100 Subject: printk: Correctly handle preemption in console_unlock() From: Petr Mladek <pmladek(a)suse.com> [ Upstream commit 257ab443118bffc7fdcef38f49cf59be68a3e362 ] Some console drivers code calls console_conditional_schedule() that looks at @console_may_schedule. The value must be cleared when the drivers are called from console_unlock() with interrupts disabled. But rescheduling is fine when the same code is called, for example, from tty operations where the console semaphore is taken via console_lock(). This is why @console_may_schedule is cleared before calling console drivers. The original value is stored to decide if we could sleep between lines. Now, @console_may_schedule is not cleared when we call console_trylock() and jump back to the "again" goto label. This has become a problem, since the commit 6b97a20d3a7909daa066 ("printk: set may_schedule for some of console_trylock() callers"). @console_may_schedule might get enabled now. There is also the opposite problem. console_lock() can be called only from preemptive context. It can always enable scheduling in the console code. But console_trylock() is not able to detect it when CONFIG_PREEMPT_COUNT is disabled. Therefore we should use the original @console_may_schedule value after re-acquiring the console semaphore in console_unlock(). This patch solves both problems by moving the "again" goto label. Alternative solution was to clear and restore the value around call_console_drivers(). Then console_conditional_schedule() could be used also inside console_unlock(). But there was a potential race with console_flush_on_panic() as reported by Sergey Senozhatsky. That function should be called only where there is only one CPU and with interrupts disabled. But better be on the safe side because stopping CPUs might fail. Fixes: 6b97a20d3a7909 ("printk: set may_schedule for some of console_trylock() callers") Link: http://lkml.kernel.org/r/1490372045-22288-1-git-send-email-pmladek@suse.com Suggested-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Jiri Slaby <jslaby(a)suse.cz> Cc: linux-fbdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky(a)gmail.com> Signed-off-by: Petr Mladek <pmladek(a)suse.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/printk/printk.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2342,7 +2342,7 @@ void console_unlock(void) } /* - * Console drivers are called under logbuf_lock, so + * Console drivers are called with interrupts disabled, so * @console_may_schedule should be cleared before; however, we may * end up dumping a lot of lines, for example, if called from * console registration path, and should invoke cond_resched() @@ -2350,11 +2350,15 @@ void console_unlock(void) * scheduling stall on a slow console leading to RCU stall and * softlockup warnings which exacerbate the issue with more * messages practically incapacitating the system. + * + * console_trylock() is not able to detect the preemptive + * context reliably. Therefore the value must be stored before + * and cleared after the the "again" goto label. */ do_cond_resched = console_may_schedule; +again: console_may_schedule = 0; -again: /* * We released the console_sem lock, so we need to recheck if * cpu is online and (if not) is there at least one CON_ANYTIME Patches currently in stable-queue which might be from pmladek(a)suse.com are queue-4.9/printk-correctly-handle-preemption-in-console_unlock.patch queue-4.9/braille-console-fix-value-returned-by-_braille_console_setup.patch

7 years, 4 months

1
0
0 0

Patch "powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-nohash-fix-use-of-mmu_has_feature-in-setup_initial_memory_limit.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Mon, 3 Apr 2017 12:05:55 +1000 Subject: powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit() From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit 4868e3508d1934d28961f940ed6b9f1e347ab52c ] setup_initial_memory_limit() is called from early_init_devtree(), which runs prior to feature patching. If the kernel is built with CONFIG_JUMP_LABEL=y and CONFIG_JUMP_LABEL_FEATURE_CHECKS=y then we will potentially get the wrong value. If we also have CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG=y we get a warning and backtrace: Warning! mmu_has_feature() used prior to jump label init! CPU: 0 PID: 0 Comm: swapper Not tainted 4.11.0-rc4-gccN-next-20170331-g6af2434 #1 Call Trace: [c000000000fc3d50] [c000000000a26c30] .dump_stack+0xa8/0xe8 (unreliable) [c000000000fc3de0] [c00000000002e6b8] .setup_initial_memory_limit+0xa4/0x104 [c000000000fc3e60] [c000000000d5c23c] .early_init_devtree+0xd0/0x2f8 [c000000000fc3f00] [c000000000d5d3b0] .early_setup+0x90/0x11c [c000000000fc3f90] [c000000000000520] start_here_multiplatform+0x68/0x80 Fix it by using early_mmu_has_feature(). Fixes: c12e6f24d413 ("powerpc: Add option to use jump label for mmu_has_feature()") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/mm/tlb_nohash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -751,7 +751,7 @@ void setup_initial_memory_limit(phys_add * avoid going over total available memory just in case... */ #ifdef CONFIG_PPC_FSL_BOOK3E - if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { + if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { unsigned long linear_sz; unsigned int num_cams; Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/powerpc-nohash-fix-use-of-mmu_has_feature-in-setup_initial_memory_limit.patch queue-4.9/powerpc-avoid-taking-a-data-miss-on-every-userspace-instruction-miss.patch queue-4.9/powerpc-modules-don-t-try-to-restore-r2-after-a-sibling-call.patch queue-4.9/powerpc-xmon-fix-an-unexpected-xmon-on-off-state-change.patch queue-4.9/powerpc-mm-hugetlb-filter-out-hugepage-size-not-supported-by-page-table-layout.patch

7 years, 4 months

1
0
0 0

Patch "powerpc/modules: Don't try to restore r2 after a sibling call" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/modules: Don't try to restore r2 after a sibling call to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-modules-don-t-try-to-restore-r2-after-a-sibling-call.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Josh Poimboeuf <jpoimboe(a)redhat.com> Date: Thu, 16 Nov 2017 11:45:37 -0600 Subject: powerpc/modules: Don't try to restore r2 after a sibling call From: Josh Poimboeuf <jpoimboe(a)redhat.com> [ Upstream commit b9eab08d012fa093947b230f9a87257c27fb829b ] When attempting to load a livepatch module, I got the following error: module_64: patch_module: Expect noop after relocate, got 3c820000 The error was triggered by the following code in unregister_netdevice_queue(): 14c: 00 00 00 48 b 14c <unregister_netdevice_queue+0x14c> 14c: R_PPC64_REL24 net_set_todo 150: 00 00 82 3c addis r4,r2,0 GCC didn't insert a nop after the branch to net_set_todo() because it's a sibling call, so it never returns. The nop isn't needed after the branch in that case. Signed-off-by: Josh Poimboeuf <jpoimboe(a)redhat.com> Acked-by: Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> Reviewed-and-tested-by: Kamalesh Babulal <kamalesh(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/asm/code-patching.h | 1 + arch/powerpc/kernel/module_64.c | 12 +++++++++++- arch/powerpc/lib/code-patching.c | 5 +++++ 3 files changed, 17 insertions(+), 1 deletion(-) --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -30,6 +30,7 @@ int patch_branch(unsigned int *addr, uns int patch_instruction(unsigned int *addr, unsigned int instr); int instr_is_relative_branch(unsigned int instr); +int instr_is_relative_link_branch(unsigned int instr); int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); unsigned long branch_target(const unsigned int *instr); unsigned int translate_branch(const unsigned int *dest, --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -494,7 +494,17 @@ static bool is_early_mcount_callsite(u32 restore r2. */ static int restore_r2(u32 *instruction, struct module *me) { - if (is_early_mcount_callsite(instruction - 1)) + u32 *prev_insn = instruction - 1; + + if (is_early_mcount_callsite(prev_insn)) + return 1; + + /* + * Make sure the branch isn't a sibling call. Sibling calls aren't + * "link" branches and they don't return, so they don't need the r2 + * restore afterwards. + */ + if (!instr_is_relative_link_branch(*prev_insn)) return 1; if (*instruction != PPC_INST_NOP) { --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -95,6 +95,11 @@ int instr_is_relative_branch(unsigned in return instr_is_branch_iform(instr) || instr_is_branch_bform(instr); } +int instr_is_relative_link_branch(unsigned int instr) +{ + return instr_is_relative_branch(instr) && (instr & BRANCH_SET_LINK); +} + static unsigned long branch_iform_target(const unsigned int *instr) { signed long imm; Patches currently in stable-queue which might be from jpoimboe(a)redhat.com are queue-4.9/powerpc-modules-don-t-try-to-restore-r2-after-a-sibling-call.patch queue-4.9/kprobes-x86-set-kprobes-pages-read-only.patch queue-4.9/kprobes-x86-fix-kprobe-booster-not-to-boost-far-call-instructions.patch queue-4.9/x86-boot-32-defer-resyncing-initial_page_table-until-per-cpu-is-set-up.patch

7 years, 4 months

1
0
0 0

Patch "powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-mm-hugetlb-filter-out-hugepage-size-not-supported-by-page-table-layout.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: "Aneesh Kumar K.V" <aneesh.kumar(a)linux.vnet.ibm.com> Date: Tue, 21 Mar 2017 22:59:56 +0530 Subject: powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout From: "Aneesh Kumar K.V" <aneesh.kumar(a)linux.vnet.ibm.com> [ Upstream commit a525108cf1cc14651602d678da38fa627a76a724 ] Without this if firmware reports 1MB page size support we will crash trying to use 1MB as hugetlb page size. echo 300 > /sys/kernel/mm/hugepages/hugepages-1024kB/nr_hugepages kernel BUG at ./arch/powerpc/include/asm/hugetlb.h:19! ..... .... [c0000000e2c27b30] c00000000029dae8 .hugetlb_fault+0x638/0xda0 [c0000000e2c27c30] c00000000026fb64 .handle_mm_fault+0x844/0x1d70 [c0000000e2c27d70] c00000000004805c .do_page_fault+0x3dc/0x7c0 [c0000000e2c27e30] c00000000000ac98 handle_page_fault+0x10/0x30 With fix, we don't enable 1MB as hugepage size. bash-4.2# cd /sys/kernel/mm/hugepages/ bash-4.2# ls hugepages-16384kB hugepages-16777216kB Signed-off-by: Aneesh Kumar K.V <aneesh.kumar(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/mm/hugetlbpage.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -765,6 +765,24 @@ static int __init add_huge_page_size(uns if ((mmu_psize = shift_to_mmu_psize(shift)) < 0) return -EINVAL; +#ifdef CONFIG_PPC_BOOK3S_64 + /* + * We need to make sure that for different page sizes reported by + * firmware we only add hugetlb support for page sizes that can be + * supported by linux page table layout. + * For now we have + * Radix: 2M + * Hash: 16M and 16G + */ + if (radix_enabled()) { + if (mmu_psize != MMU_PAGE_2M) + return -EINVAL; + } else { + if (mmu_psize != MMU_PAGE_16M && mmu_psize != MMU_PAGE_16G) + return -EINVAL; + } +#endif + BUG_ON(mmu_psize_defs[mmu_psize].shift != shift); /* Return if huge page size has already been setup */ Patches currently in stable-queue which might be from aneesh.kumar(a)linux.vnet.ibm.com are queue-4.9/mm-fix-false-positive-vm_bug_on-in-page_cache_-get-add-_speculative.patch queue-4.9/powerpc-mm-hugetlb-filter-out-hugepage-size-not-supported-by-page-table-layout.patch

7 years, 4 months

1
0
0 0

Patch "powerpc: Avoid taking a data miss on every userspace instruction miss" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc: Avoid taking a data miss on every userspace instruction miss to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-avoid-taking-a-data-miss-on-every-userspace-instruction-miss.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Anton Blanchard <anton(a)samba.org> Date: Mon, 3 Apr 2017 16:41:02 +1000 Subject: powerpc: Avoid taking a data miss on every userspace instruction miss From: Anton Blanchard <anton(a)samba.org> [ Upstream commit a7a9dcd882a67b68568868b988289fce5ffd8419 ] Early on in do_page_fault() we call store_updates_sp(), regardless of the type of exception. For an instruction miss this doesn't make sense, because we only use this information to detect if a data miss is the result of a stack expansion instruction or not. Worse still, it results in a data miss within every userspace instruction miss handler, because we try and load the very instruction we are about to install a pte for! A simple exec microbenchmark runs 6% faster on POWER8 with this fix: #include <stdlib.h> #include <stdio.h> #include <unistd.h> int main(int argc, char *argv[]) { unsigned long left = atol(argv[1]); char leftstr[16]; if (left-- == 0) return 0; sprintf(leftstr, "%ld", left); execlp(argv[0], argv[0], leftstr, NULL); perror("exec failed\n"); return 0; } Pass the number of iterations on the command line (eg 10000) and time how long it takes to execute. Signed-off-by: Anton Blanchard <anton(a)samba.org> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -294,7 +294,7 @@ int do_page_fault(struct pt_regs *regs, * can result in fault, which will cause a deadlock when called with * mmap_sem held */ - if (user_mode(regs)) + if (!is_exec && user_mode(regs)) store_update_sp = store_updates_sp(regs); if (user_mode(regs)) Patches currently in stable-queue which might be from anton(a)samba.org are queue-4.9/powerpc-avoid-taking-a-data-miss-on-every-userspace-instruction-miss.patch

7 years, 4 months

1
0
0 0

Patch "power: supply: ab8500_charger: Fix an error handling path" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled power: supply: ab8500_charger: Fix an error handling path to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: power-supply-ab8500_charger-fix-an-error-handling-path.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Wed, 22 Nov 2017 21:27:31 +0100 Subject: power: supply: ab8500_charger: Fix an error handling path From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit bf59fddde1c3eab89eb8dca8f3d3dc097887d2bb ] 'ret' is know to be 0 at this point, because it has not been updated by the the previous call to 'abx500_mask_and_set_register_interruptible()'. Fix it by updating 'ret' before checking if an error occurred. Fixes: 84edbeeab67c ("ab8500-charger: AB8500 charger driver") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/power/supply/ab8500_charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/power/supply/ab8500_charger.c +++ b/drivers/power/supply/ab8500_charger.c @@ -3218,7 +3218,7 @@ static int ab8500_charger_init_hw_regist } /* Enable backup battery charging */ - abx500_mask_and_set_register_interruptible(di->dev, + ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); if (ret < 0) Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.9/power-supply-ab8500_charger-fix-an-error-handling-path.patch queue-4.9/power-supply-ab8500_charger-bail-out-in-case-of-error-in-ab8500_charger_init_hw_registers.patch

7 years, 4 months

1
0
0 0

Patch "power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()' to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: power-supply-ab8500_charger-bail-out-in-case-of-error-in-ab8500_charger_init_hw_registers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Wed, 22 Nov 2017 21:31:20 +0100 Subject: power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()' From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 09edcb647542487864e23aa8d2ef26be3e08978a ] If an error occurs when we enable the backup battery charging, we should go through the error handling path directly. Before commit db43e6c473b5 ("ab8500-bm: Add usb power path support") this was the case, but this commit has added some code between the last test and the 'out' label. So, in case of error, this added code is executed and the error may be silently ignored. Fix it by adding the missing 'goto out', as done in all other error handling paths. Fixes: db43e6c473b5 ("ab8500-bm: Add usb power path support") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/power/supply/ab8500_charger.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/power/supply/ab8500_charger.c +++ b/drivers/power/supply/ab8500_charger.c @@ -3221,8 +3221,10 @@ static int ab8500_charger_init_hw_regist ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); - if (ret < 0) + if (ret < 0) { dev_err(di->dev, "%s mask and set failed\n", __func__); + goto out; + } if (is_ab8540(di->parent)) { ret = abx500_mask_and_set_register_interruptible(di->dev, Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.9/power-supply-ab8500_charger-fix-an-error-handling-path.patch queue-4.9/power-supply-ab8500_charger-bail-out-in-case-of-error-in-ab8500_charger_init_hw_registers.patch

7 years, 4 months

1
0
0 0

Patch "perf trace: Handle unpaired raw_syscalls:sys_exit event" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf trace: Handle unpaired raw_syscalls:sys_exit event to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-trace-handle-unpaired-raw_syscalls-sys_exit-event.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Arnaldo Carvalho de Melo <acme(a)redhat.com> Date: Wed, 29 Mar 2017 16:37:51 -0300 Subject: perf trace: Handle unpaired raw_syscalls:sys_exit event From: Arnaldo Carvalho de Melo <acme(a)redhat.com> [ Upstream commit fd2b2975149f5f7099693027cece81b16842964a ] Which may happen when we start a tracing session and a thread is waiting for something like "poll" to return, in which case we better print "?" both for the syscall entry timestamp and for the duration. E.g.: Tracing existing mutt session: # perf trace -p `pidof mutt` ? ( ? ): mutt/17135 ... [continued]: poll()) = 1 0.027 ( 0.013 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1 0.047 ( 0.008 ms): mutt/17135 poll(ufds: 0x7ffcb3c42c50, nfds: 1, timeout_msecs: 1000) = 1 0.059 ( 0.008 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1 <SNIP> Before it would print a large number because we'd do: ttrace->entry_time - trace->base_time And entry_time would be 0, while base_time would be the timestamp for the first event 'perf trace' reads, oops. Cc: Adrian Hunter <adrian.hunter(a)intel.com> Cc: David Ahern <dsahern(a)gmail.com> Cc: Jiri Olsa <jolsa(a)kernel.org> Cc: Luis Claudio Gonçalves <lclaudio(a)redhat.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Wang Nan <wangnan0(a)huawei.com> Link: http://lkml.kernel.org/n/tip-wbcb93ofva2qdjd5ltn5eeqq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/builtin-trace.c | 43 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 34 insertions(+), 9 deletions(-) --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -822,12 +822,21 @@ struct syscall { void **arg_parm; }; -static size_t fprintf_duration(unsigned long t, FILE *fp) +/* + * We need to have this 'calculated' boolean because in some cases we really + * don't know what is the duration of a syscall, for instance, when we start + * a session and some threads are waiting for a syscall to finish, say 'poll', + * in which case all we can do is to print "( ? ) for duration and for the + * start timestamp. + */ +static size_t fprintf_duration(unsigned long t, bool calculated, FILE *fp) { double duration = (double)t / NSEC_PER_MSEC; size_t printed = fprintf(fp, "("); - if (duration >= 1.0) + if (!calculated) + printed += fprintf(fp, " ? "); + else if (duration >= 1.0) printed += color_fprintf(fp, PERF_COLOR_RED, "%6.3f ms", duration); else if (duration >= 0.01) printed += color_fprintf(fp, PERF_COLOR_YELLOW, "%6.3f ms", duration); @@ -1030,13 +1039,27 @@ static bool trace__filter_duration(struc return t < (trace->duration_filter * NSEC_PER_MSEC); } -static size_t trace__fprintf_tstamp(struct trace *trace, u64 tstamp, FILE *fp) +static size_t __trace__fprintf_tstamp(struct trace *trace, u64 tstamp, FILE *fp) { double ts = (double)(tstamp - trace->base_time) / NSEC_PER_MSEC; return fprintf(fp, "%10.3f ", ts); } +/* + * We're handling tstamp=0 as an undefined tstamp, i.e. like when we are + * using ttrace->entry_time for a thread that receives a sys_exit without + * first having received a sys_enter ("poll" issued before tracing session + * starts, lost sys_enter exit due to ring buffer overflow). + */ +static size_t trace__fprintf_tstamp(struct trace *trace, u64 tstamp, FILE *fp) +{ + if (tstamp > 0) + return __trace__fprintf_tstamp(trace, tstamp, fp); + + return fprintf(fp, " ? "); +} + static bool done = false; static bool interrupted = false; @@ -1047,10 +1070,10 @@ static void sig_handler(int sig) } static size_t trace__fprintf_entry_head(struct trace *trace, struct thread *thread, - u64 duration, u64 tstamp, FILE *fp) + u64 duration, bool duration_calculated, u64 tstamp, FILE *fp) { size_t printed = trace__fprintf_tstamp(trace, tstamp, fp); - printed += fprintf_duration(duration, fp); + printed += fprintf_duration(duration, duration_calculated, fp); if (trace->multiple_threads) { if (trace->show_comm) @@ -1452,7 +1475,7 @@ static int trace__printf_interrupted_ent duration = sample->time - ttrace->entry_time; - printed = trace__fprintf_entry_head(trace, trace->current, duration, ttrace->entry_time, trace->output); + printed = trace__fprintf_entry_head(trace, trace->current, duration, true, ttrace->entry_time, trace->output); printed += fprintf(trace->output, "%-70s) ...\n", ttrace->entry_str); ttrace->entry_pending = false; @@ -1499,7 +1522,7 @@ static int trace__sys_enter(struct trace if (sc->is_exit) { if (!(trace->duration_filter || trace->summary_only || trace->min_stack)) { - trace__fprintf_entry_head(trace, thread, 1, ttrace->entry_time, trace->output); + trace__fprintf_entry_head(trace, thread, 0, false, ttrace->entry_time, trace->output); fprintf(trace->output, "%-70s)\n", ttrace->entry_str); } } else { @@ -1547,6 +1570,7 @@ static int trace__sys_exit(struct trace { long ret; u64 duration = 0; + bool duration_calculated = false; struct thread *thread; int id = perf_evsel__sc_tp_uint(evsel, id, sample), err = -1, callchain_ret = 0; struct syscall *sc = trace__syscall_info(trace, evsel, id); @@ -1577,6 +1601,7 @@ static int trace__sys_exit(struct trace duration = sample->time - ttrace->entry_time; if (trace__filter_duration(trace, duration)) goto out; + duration_calculated = true; } else if (trace->duration_filter) goto out; @@ -1592,7 +1617,7 @@ static int trace__sys_exit(struct trace if (trace->summary_only) goto out; - trace__fprintf_entry_head(trace, thread, duration, ttrace->entry_time, trace->output); + trace__fprintf_entry_head(trace, thread, duration, duration_calculated, ttrace->entry_time, trace->output); if (ttrace->entry_pending) { fprintf(trace->output, "%-70s", ttrace->entry_str); @@ -1855,7 +1880,7 @@ static int trace__pgfault(struct trace * thread__find_addr_location(thread, sample->cpumode, MAP__FUNCTION, sample->ip, &al); - trace__fprintf_entry_head(trace, thread, 0, sample->time, trace->output); + trace__fprintf_entry_head(trace, thread, 0, true, sample->time, trace->output); fprintf(trace->output, "%sfault [", evsel->attr.config == PERF_COUNT_SW_PAGE_FAULTS_MAJ ? Patches currently in stable-queue which might be from acme(a)redhat.com are queue-4.9/perf-buildid-do-not-assume-that-readlink-returns-a-null-terminated-string.patch queue-4.9/perf-session-don-t-rely-on-evlist-in-pipe-mode.patch queue-4.9/perf-tools-make-perf_event__synthesize_mmap_events-scale.patch queue-4.9/perf-annotate-fix-a-bug-following-symbolic-link-of-a-build-id-file.patch queue-4.9/perf-stat-issue-a-hw-watchdog-disable-hint.patch queue-4.9/perf-sort-fix-segfault-with-basic-block-cycles-sort-dimension.patch queue-4.9/perf-trace-handle-unpaired-raw_syscalls-sys_exit-event.patch queue-4.9/perf-probe-fix-concat_probe_trace_events.patch queue-4.9/perf-inject-copy-events-when-reordering-events-in-pipe-mode.patch queue-4.9/perf-probe-return-errno-when-not-hitting-any-event.patch queue-4.9/perf-evsel-return-exact-sub-event-which-failed-with-eperm-for-wildcards.patch queue-4.9/perf-stat-fix-bug-in-handling-events-in-error-state.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror