- Linux-stable-mirror - lists.linaro.org

Patch "mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-fix-interpretation-of-nand_cmd_none-in-nand_command.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Miquel Raynal <miquel.raynal(a)free-electrons.com> Date: Wed, 8 Nov 2017 17:00:27 +0100 Subject: mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]() From: Miquel Raynal <miquel.raynal(a)free-electrons.com> [ Upstream commit df467899da0b71465760b4e35127bce837244eee ] Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE and a column address and expect the controller to only send address cycles. Right now, the default ->cmdfunc() implementations provided by the core do not filter out the command cycle in this case and forwards the request to the controller driver through the ->cmd_ctrl() method. The thing is, NAND controller drivers can get this wrong and send a command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is -1, and the command field is usually casted to an u8, we end up sending the 0xFF command which is actually a RESET operation. Add conditions in nand_command[_lp]() functions to sending the initial command cycle when command == NAND_CMD_NONE. Signed-off-by: Miquel Raynal <miquel.raynal(a)free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/nand_base.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -710,7 +710,8 @@ static void nand_command(struct mtd_info chip->cmd_ctrl(mtd, readcmd, ctrl); ctrl &= ~NAND_CTRL_CHANGE; } - chip->cmd_ctrl(mtd, command, ctrl); + if (command != NAND_CMD_NONE) + chip->cmd_ctrl(mtd, command, ctrl); /* Address cycle, when necessary */ ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; @@ -738,6 +739,7 @@ static void nand_command(struct mtd_info */ switch (command) { + case NAND_CMD_NONE: case NAND_CMD_PAGEPROG: case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: @@ -831,7 +833,9 @@ static void nand_command_lp(struct mtd_i } /* Command latch cycle */ - chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + if (command != NAND_CMD_NONE) + chip->cmd_ctrl(mtd, command, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); if (column != -1 || page_addr != -1) { int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; @@ -866,6 +870,7 @@ static void nand_command_lp(struct mtd_i */ switch (command) { + case NAND_CMD_NONE: case NAND_CMD_CACHEDPROG: case NAND_CMD_PAGEPROG: case NAND_CMD_ERASE1: Patches currently in stable-queue which might be from miquel.raynal(a)free-electrons.com are queue-4.15/mtd-nand-fix-interpretation-of-nand_cmd_none-in-nand_command.patch

7 years, 4 months

1
0
0 0

Patch "mmc: mmc_test: Ensure command queue is disabled for testing" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mmc: mmc_test: Ensure command queue is disabled for testing to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mmc-mmc_test-ensure-command-queue-is-disabled-for-testing.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Adrian Hunter <adrian.hunter(a)intel.com> Date: Fri, 1 Dec 2017 14:55:31 +0200 Subject: mmc: mmc_test: Ensure command queue is disabled for testing From: Adrian Hunter <adrian.hunter(a)intel.com> [ Upstream commit 23a185254ace8e63dc4ca36e0315aed9440ae749 ] mmc_test disables the command queue because none of the tests use the command queue. However the Reset Test will re-enable it, so disable it in that case too. Fixes: 9d4579a85c84 ("mmc: mmc_test: Disable Command Queue while mmc_test is used") Signed-off-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/core/mmc_test.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/drivers/mmc/core/mmc_test.c +++ b/drivers/mmc/core/mmc_test.c @@ -2328,10 +2328,17 @@ static int mmc_test_reset(struct mmc_tes int err; err = mmc_hw_reset(host); - if (!err) + if (!err) { + /* + * Reset will re-enable the card's command queue, but tests + * expect it to be disabled. + */ + if (card->ext_csd.cmdq_en) + mmc_cmdq_disable(card); return RESULT_OK; - else if (err == -EOPNOTSUPP) + } else if (err == -EOPNOTSUPP) { return RESULT_UNSUP_HOST; + } return RESULT_FAIL; } Patches currently in stable-queue which might be from adrian.hunter(a)intel.com are queue-4.15/mmc-mmc_test-ensure-command-queue-is-disabled-for-testing.patch queue-4.15/perf-report-fix-d-output-for-user-metadata-events.patch

7 years, 4 months

1
0
0 0

Patch "media: vsp1: Prevent suspending and resuming DRM pipelines" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: vsp1: Prevent suspending and resuming DRM pipelines to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-vsp1-prevent-suspending-and-resuming-drm-pipelines.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Date: Mon, 4 Dec 2017 06:01:11 -0500 Subject: media: vsp1: Prevent suspending and resuming DRM pipelines From: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> [ Upstream commit a17d2d6cd9985ca09a9e384f1bc71d710f7e5203 ] When used as part of a display pipeline, the VSP is stopped and restarted explicitly by the DU from its suspend and resume handlers. There is thus no need to stop or restart pipelines in the VSP suspend and resume handlers, and doing so would cause the hardware to be left in a misconfigured state. Ensure that the VSP suspend and resume handlers do not affect DRM-based pipelines. Signed-off-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/vsp1/vsp1_drv.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -571,7 +571,13 @@ static int __maybe_unused vsp1_pm_suspen { struct vsp1_device *vsp1 = dev_get_drvdata(dev); - vsp1_pipelines_suspend(vsp1); + /* + * When used as part of a display pipeline, the VSP is stopped and + * restarted explicitly by the DU. + */ + if (!vsp1->drm) + vsp1_pipelines_suspend(vsp1); + pm_runtime_force_suspend(vsp1->dev); return 0; @@ -582,7 +588,13 @@ static int __maybe_unused vsp1_pm_resume struct vsp1_device *vsp1 = dev_get_drvdata(dev); pm_runtime_force_resume(vsp1->dev); - vsp1_pipelines_resume(vsp1); + + /* + * When used as part of a display pipeline, the VSP is stopped and + * restarted explicitly by the DU. + */ + if (!vsp1->drm) + vsp1_pipelines_resume(vsp1); return 0; } Patches currently in stable-queue which might be from kieran.bingham+renesas(a)ideasonboard.com are queue-4.15/media-vsp1-prevent-suspending-and-resuming-drm-pipelines.patch

7 years, 4 months

1
0
0 0

Patch "media: davinci: vpif_capture: add NULL check on devm_kzalloc return value" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: davinci: vpif_capture: add NULL check on devm_kzalloc return value to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-davinci-vpif_capture-add-null-check-on-devm_kzalloc-return-value.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Wed, 22 Nov 2017 22:34:44 -0500 Subject: media: davinci: vpif_capture: add NULL check on devm_kzalloc return value From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit 5a18c2434f8bfc8bc2fb0f8af3e44f7408d63e4f ] Check return value from call to devm_kzalloc() in order to prevent a NULL pointer dereference. This issue was detected with the help of Coccinelle. Fixes: 4a5f8ae50b66 ("[media] davinci: vpif_capture: get subdevs from DT when available") Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/davinci/vpif_capture.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/media/platform/davinci/vpif_capture.c +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -1550,6 +1550,8 @@ vpif_capture_get_pdata(struct platform_d sizeof(*chan->inputs) * VPIF_CAPTURE_NUM_CHANNELS, GFP_KERNEL); + if (!chan->inputs) + return NULL; chan->input_count++; chan->inputs[i].input.type = V4L2_INPUT_TYPE_CAMERA; Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-4.15/media-davinci-vpif_capture-add-null-check-on-devm_kzalloc-return-value.patch

7 years, 4 months

1
0
0 0

Patch "media: cpia2: Fix a couple off by one bugs" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: cpia2: Fix a couple off by one bugs to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-cpia2-fix-a-couple-off-by-one-bugs.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Thu, 9 Nov 2017 16:28:14 -0500 Subject: media: cpia2: Fix a couple off by one bugs From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit d5ac225c7d64c9c3ef821239edc035634e594ec9 ] The cam->buffers[] array has cam->num_frames elements so the > needs to be changed to >= to avoid going beyond the end of the array. The ->buffers[] array is allocated in cpia2_allocate_buffers() if you want to confirm. Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/cpia2/cpia2_v4l.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/media/usb/cpia2/cpia2_v4l.c +++ b/drivers/media/usb/cpia2/cpia2_v4l.c @@ -808,7 +808,7 @@ static int cpia2_querybuf(struct file *f struct camera_data *cam = video_drvdata(file); if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - buf->index > cam->num_frames) + buf->index >= cam->num_frames) return -EINVAL; buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer; @@ -859,7 +859,7 @@ static int cpia2_qbuf(struct file *file, if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || buf->memory != V4L2_MEMORY_MMAP || - buf->index > cam->num_frames) + buf->index >= cam->num_frames) return -EINVAL; DBG("QBUF #%d\n", buf->index); Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.15/media-cpia2-fix-a-couple-off-by-one-bugs.patch queue-4.15/crypto-chelsio-fix-an-error-code-in-chcr_hash_dma_map.patch queue-4.15/drm-panel-rpi-touchscreen-propagate-errors-in-rpi_touchscreen_i2c_read.patch queue-4.15/bnxt_en-uninitialized-variable-in-bnxt_tc_parse_actions.patch queue-4.15/power-supply-sbs-message-double-left-shift-bug-in-sbsm_select.patch queue-4.15/asoc-nuc900-fix-a-loop-timeout-test.patch

7 years, 4 months

1
0
0 0

Patch "mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mac80211_hwsim-enforce-ps_manual_poll-to-be-set-after-ps_enabled.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Adiel Aloni <adiel.aloni(a)intel.com> Date: Fri, 1 Dec 2017 13:50:53 +0200 Subject: mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED From: Adiel Aloni <adiel.aloni(a)intel.com> [ Upstream commit e16ea4bb516bc21ea2202f2107718b29218bea59 ] Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll, only if PS_ENABLED was set before. This is required due to commit c9491367b759 ("mac80211: always update the PM state of a peer on MGMT / DATA frames") that enforces the ap to check only mgmt/data frames ps bit, and then update station's power save accordingly. When sending only ps-poll (control frame) the ap will not be aware that the station entered power save. Setting ps enable before triggering ps_poll, will send NDP with PM bit enabled first. Signed-off-by: Adiel Aloni <adiel.aloni(a)intel.com> Signed-off-by: Luca Coelho <luciano.coelho(a)intel.com> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/mac80211_hwsim.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -729,16 +729,21 @@ static int hwsim_fops_ps_write(void *dat val != PS_MANUAL_POLL) return -EINVAL; - old_ps = data->ps; - data->ps = val; - - local_bh_disable(); if (val == PS_MANUAL_POLL) { + if (data->ps != PS_ENABLED) + return -EINVAL; + local_bh_disable(); ieee80211_iterate_active_interfaces_atomic( data->hw, IEEE80211_IFACE_ITER_NORMAL, hwsim_send_ps_poll, data); - data->ps_poll_pending = true; - } else if (old_ps == PS_DISABLED && val != PS_DISABLED) { + local_bh_enable(); + return 0; + } + old_ps = data->ps; + data->ps = val; + + local_bh_disable(); + if (old_ps == PS_DISABLED && val != PS_DISABLED) { ieee80211_iterate_active_interfaces_atomic( data->hw, IEEE80211_IFACE_ITER_NORMAL, hwsim_send_nullfunc_ps, data); Patches currently in stable-queue which might be from adiel.aloni(a)intel.com are queue-4.15/mac80211_hwsim-enforce-ps_manual_poll-to-be-set-after-ps_enabled.patch

7 years, 4 months

1
0
0 0

Patch "mac80211: remove BUG() when interface type is invalid" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mac80211: remove BUG() when interface type is invalid to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mac80211-remove-bug-when-interface-type-is-invalid.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Luca Coelho <luciano.coelho(a)intel.com> Date: Sun, 29 Oct 2017 11:51:10 +0200 Subject: mac80211: remove BUG() when interface type is invalid From: Luca Coelho <luciano.coelho(a)intel.com> [ Upstream commit c7976f5272486e4ff406014c4b43e2fa3b70b052 ] In the ieee80211_setup_sdata() we check if the interface type is valid and, if not, call BUG(). This should never happen, but if there is something wrong with the code, it will not be caught until the bug happens when an interface is being set up. Calling BUG() is too extreme for this and a WARN_ON() would be better used instead. Change that. Signed-off-by: Luca Coelho <luciano.coelho(a)intel.com> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/mac80211/iface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1474,7 +1474,7 @@ static void ieee80211_setup_sdata(struct break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: - BUG(); + WARN_ON(1); break; } Patches currently in stable-queue which might be from luciano.coelho(a)intel.com are queue-4.15/mac80211-remove-bug-when-interface-type-is-invalid.patch queue-4.15/mac80211_hwsim-enforce-ps_manual_poll-to-be-set-after-ps_enabled.patch queue-4.15/iwlwifi-mvm-rs-don-t-override-the-rate-history-in-the-search-cycle.patch queue-4.15/iwlwifi-mvm-avoid-dumping-assert-log-when-device-is-stopped.patch

7 years, 4 months

1
0
0 0

Patch "locking/locktorture: Fix num reader/writer corner cases" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled locking/locktorture: Fix num reader/writer corner cases to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: locking-locktorture-fix-num-reader-writer-corner-cases.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Davidlohr Bueso <dave(a)stgolabs.net> Date: Mon, 15 May 2017 02:07:23 -0700 Subject: locking/locktorture: Fix num reader/writer corner cases From: Davidlohr Bueso <dave(a)stgolabs.net> [ Upstream commit 2ce77d16db4240dd2e422fc0a5c26d3e2ec03446 ] Things can explode for locktorture if the user does combinations of nwriters_stress=0 nreaders_stress=0. Fix this by not assuming we always want to torture writer threads. Reported-by: Jeremy Linton <jeremy.linton(a)arm.com> Signed-off-by: Davidlohr Bueso <dbueso(a)suse.de> Signed-off-by: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> Reviewed-by: Jeremy Linton <jeremy.linton(a)arm.com> Tested-by: Jeremy Linton <jeremy.linton(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/locking/locktorture.c | 76 ++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 32 deletions(-) --- a/kernel/locking/locktorture.c +++ b/kernel/locking/locktorture.c @@ -715,8 +715,7 @@ static void __torture_print_stats(char * { bool fail = 0; int i, n_stress; - long max = 0; - long min = statp[0].n_lock_acquired; + long max = 0, min = statp ? statp[0].n_lock_acquired : 0; long long sum = 0; n_stress = write ? cxt.nrealwriters_stress : cxt.nrealreaders_stress; @@ -823,7 +822,7 @@ static void lock_torture_cleanup(void) * such, only perform the underlying torture-specific cleanups, * and avoid anything related to locktorture. */ - if (!cxt.lwsa) + if (!cxt.lwsa && !cxt.lrsa) goto end; if (writer_tasks) { @@ -898,6 +897,13 @@ static int __init lock_torture_init(void firsterr = -EINVAL; goto unwind; } + + if (nwriters_stress == 0 && nreaders_stress == 0) { + pr_alert("lock-torture: must run at least one locking thread\n"); + firsterr = -EINVAL; + goto unwind; + } + if (cxt.cur_ops->init) cxt.cur_ops->init(); @@ -921,17 +927,19 @@ static int __init lock_torture_init(void #endif /* Initialize the statistics so that each run gets its own numbers. */ + if (nwriters_stress) { + lock_is_write_held = 0; + cxt.lwsa = kmalloc(sizeof(*cxt.lwsa) * cxt.nrealwriters_stress, GFP_KERNEL); + if (cxt.lwsa == NULL) { + VERBOSE_TOROUT_STRING("cxt.lwsa: Out of memory"); + firsterr = -ENOMEM; + goto unwind; + } - lock_is_write_held = 0; - cxt.lwsa = kmalloc(sizeof(*cxt.lwsa) * cxt.nrealwriters_stress, GFP_KERNEL); - if (cxt.lwsa == NULL) { - VERBOSE_TOROUT_STRING("cxt.lwsa: Out of memory"); - firsterr = -ENOMEM; - goto unwind; - } - for (i = 0; i < cxt.nrealwriters_stress; i++) { - cxt.lwsa[i].n_lock_fail = 0; - cxt.lwsa[i].n_lock_acquired = 0; + for (i = 0; i < cxt.nrealwriters_stress; i++) { + cxt.lwsa[i].n_lock_fail = 0; + cxt.lwsa[i].n_lock_acquired = 0; + } } if (cxt.cur_ops->readlock) { @@ -948,19 +956,21 @@ static int __init lock_torture_init(void cxt.nrealreaders_stress = cxt.nrealwriters_stress; } - lock_is_read_held = 0; - cxt.lrsa = kmalloc(sizeof(*cxt.lrsa) * cxt.nrealreaders_stress, GFP_KERNEL); - if (cxt.lrsa == NULL) { - VERBOSE_TOROUT_STRING("cxt.lrsa: Out of memory"); - firsterr = -ENOMEM; - kfree(cxt.lwsa); - cxt.lwsa = NULL; - goto unwind; - } - - for (i = 0; i < cxt.nrealreaders_stress; i++) { - cxt.lrsa[i].n_lock_fail = 0; - cxt.lrsa[i].n_lock_acquired = 0; + if (nreaders_stress) { + lock_is_read_held = 0; + cxt.lrsa = kmalloc(sizeof(*cxt.lrsa) * cxt.nrealreaders_stress, GFP_KERNEL); + if (cxt.lrsa == NULL) { + VERBOSE_TOROUT_STRING("cxt.lrsa: Out of memory"); + firsterr = -ENOMEM; + kfree(cxt.lwsa); + cxt.lwsa = NULL; + goto unwind; + } + + for (i = 0; i < cxt.nrealreaders_stress; i++) { + cxt.lrsa[i].n_lock_fail = 0; + cxt.lrsa[i].n_lock_acquired = 0; + } } } @@ -990,12 +1000,14 @@ static int __init lock_torture_init(void goto unwind; } - writer_tasks = kzalloc(cxt.nrealwriters_stress * sizeof(writer_tasks[0]), - GFP_KERNEL); - if (writer_tasks == NULL) { - VERBOSE_TOROUT_ERRSTRING("writer_tasks: Out of memory"); - firsterr = -ENOMEM; - goto unwind; + if (nwriters_stress) { + writer_tasks = kzalloc(cxt.nrealwriters_stress * sizeof(writer_tasks[0]), + GFP_KERNEL); + if (writer_tasks == NULL) { + VERBOSE_TOROUT_ERRSTRING("writer_tasks: Out of memory"); + firsterr = -ENOMEM; + goto unwind; + } } if (cxt.cur_ops->readlock) { Patches currently in stable-queue which might be from dave(a)stgolabs.net are queue-4.15/locking-locktorture-fix-num-reader-writer-corner-cases.patch

7 years, 4 months

1
0
0 0

Patch "leds: pm8058: Silence pointer to integer size warning" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled leds: pm8058: Silence pointer to integer size warning to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: leds-pm8058-silence-pointer-to-integer-size-warning.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Bjorn Andersson <bjorn.andersson(a)linaro.org> Date: Thu, 30 Nov 2017 21:16:56 -0800 Subject: leds: pm8058: Silence pointer to integer size warning From: Bjorn Andersson <bjorn.andersson(a)linaro.org> [ Upstream commit 8f52df50d9366f770a894d14ef724e5e04574e98 ] The pointer returned by of_device_get_match_data() doesn't have the same size as u32 on 64-bit architectures, causing a compile warning when compile-testing the driver on such platform. Cast the return value of of_device_get_match_data() to unsigned long and then to u32 to silence this warning. Fixes: 7f866986e705 ("leds: add PM8058 LEDs driver") Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Acked-by: Pavel Machek <pavel(a)ucw.cz> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/leds/leds-pm8058.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/leds/leds-pm8058.c +++ b/drivers/leds/leds-pm8058.c @@ -106,7 +106,7 @@ static int pm8058_led_probe(struct platf if (!led) return -ENOMEM; - led->ledtype = (u32)of_device_get_match_data(&pdev->dev); + led->ledtype = (u32)(unsigned long)of_device_get_match_data(&pdev->dev); map = dev_get_regmap(pdev->dev.parent, NULL); if (!map) { Patches currently in stable-queue which might be from bjorn.andersson(a)linaro.org are queue-4.15/leds-pm8058-silence-pointer-to-integer-size-warning.patch

7 years, 4 months

1
0
0 0

Patch "KVM: X86: Restart the guest when insn_len is zero and SEV is enabled" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: X86: Restart the guest when insn_len is zero and SEV is enabled to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-restart-the-guest-when-insn_len-is-zero-and-sev-is-enabled.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Brijesh Singh <brijesh.singh(a)amd.com> Date: Mon, 4 Dec 2017 10:57:40 -0600 Subject: KVM: X86: Restart the guest when insn_len is zero and SEV is enabled From: Brijesh Singh <brijesh.singh(a)amd.com> [ Upstream commit 00b10fe1046c4b2232097a7ffaa9238c7e479388 ] On AMD platforms, under certain conditions insn_len may be zero on #NPF. This can happen if a guest gets a page-fault on data access but the HW table walker is not able to read the instruction page (e.g instruction page is not present in memory). Typically, when insn_len is zero, x86_emulate_instruction() walks the guest page table and fetches the instruction bytes from guest memory. When SEV is enabled, the guest memory is encrypted with guest-specific key hence hypervisor will not able to fetch the instruction bytes. In those cases we simply restart the guest. I have encountered this issue when running kernbench inside the guest. Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: "Radim Krčmář" <rkrcmar(a)redhat.com> Cc: Joerg Roedel <joro(a)8bytes.org> Cc: Borislav Petkov <bp(a)suse.de> Cc: Tom Lendacky <thomas.lendacky(a)amd.com> Cc: x86(a)kernel.org Cc: kvm(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Signed-off-by: Brijesh Singh <brijesh.singh(a)amd.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/mmu.c | 10 ++++++++++ arch/x86/kvm/svm.c | 6 ++++-- 2 files changed, 14 insertions(+), 2 deletions(-) --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4951,6 +4951,16 @@ int kvm_mmu_page_fault(struct kvm_vcpu * if (mmio_info_in_cache(vcpu, cr2, direct)) emulation_type = 0; emulate: + /* + * On AMD platforms, under certain conditions insn_len may be zero on #NPF. + * This can happen if a guest gets a page-fault on data access but the HW + * table walker is not able to read the instruction page (e.g instruction + * page is not present in memory). In those cases we simply restart the + * guest. + */ + if (unlikely(insn && !insn_len)) + return 1; + er = x86_emulate_instruction(vcpu, cr2, emulation_type, insn, insn_len); switch (er) { --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -2178,7 +2178,8 @@ static int pf_interception(struct vcpu_s u64 error_code = svm->vmcb->control.exit_info_1; return kvm_handle_page_fault(&svm->vcpu, error_code, fault_address, - svm->vmcb->control.insn_bytes, + static_cpu_has(X86_FEATURE_DECODEASSISTS) ? + svm->vmcb->control.insn_bytes : NULL, svm->vmcb->control.insn_len); } @@ -2189,7 +2190,8 @@ static int npf_interception(struct vcpu_ trace_kvm_page_fault(fault_address, error_code); return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code, - svm->vmcb->control.insn_bytes, + static_cpu_has(X86_FEATURE_DECODEASSISTS) ? + svm->vmcb->control.insn_bytes : NULL, svm->vmcb->control.insn_len); } Patches currently in stable-queue which might be from brijesh.singh(a)amd.com are queue-4.15/kvm-x86-restart-the-guest-when-insn_len-is-zero-and-sev-is-enabled.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror