- Linux-stable-mirror - lists.linaro.org

Patch "tty: n_gsm: Allow ADM response in addition to UA for control dlci" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tty: n_gsm: Allow ADM response in addition to UA for control dlci to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Wed, 3 Jan 2018 10:18:03 -0800 Subject: tty: n_gsm: Allow ADM response in addition to UA for control dlci From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial(a)vger.kernel.org Cc: Alan Cox <alan(a)llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal(a)aksignal.cz> Cc: Jiri Slaby <jslaby(a)suse.cz> Cc: Marcel Partap <mpartap(a)gmx.net> Cc: Michael Scott <michael.scott(a)linaro.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Russ Gorby <russ.gorby(a)intel.com> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: Sebastian Reichel <sre(a)kernel.org> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/n_gsm.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1467,6 +1467,10 @@ static void gsm_dlci_open(struct gsm_dlc * in which case an opening port goes back to closed and a closing port * is simply put into closed state (any further frames from the other * end will get a DM response) + * + * Some control dlci can stay in ADM mode with other dlci working just + * fine. In that case we can just keep the control dlci open after the + * DLCI_OPENING retries time out. */ static void gsm_dlci_t1(unsigned long data) @@ -1480,8 +1484,15 @@ static void gsm_dlci_t1(unsigned long da if (dlci->retries) { gsm_command(dlci->gsm, dlci->addr, SABM|PF); mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); - } else + } else if (!dlci->addr && gsm->control == (DM | PF)) { + if (debug & 8) + pr_info("DLCI %d opening in ADM mode.\n", + dlci->addr); + gsm_dlci_open(dlci); + } else { gsm_dlci_close(dlci); + } + break; case DLCI_CLOSING: dlci->retries--; @@ -1499,8 +1510,8 @@ static void gsm_dlci_t1(unsigned long da * @dlci: DLCI to open * * Commence opening a DLCI from the Linux side. We issue SABM messages - * to the modem which should then reply with a UA, at which point we - * will move into open state. Opening is done asynchronously with retry + * to the modem which should then reply with a UA or ADM, at which point + * we will move into open state. Opening is done asynchronously with retry * running off timers and the responses. */ Patches currently in stable-queue which might be from tony(a)atomide.com are queue-3.18/tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch

7 years, 7 months

1
0
0 0

Patch "tags: honor COMPILED_SOURCE with apart output directory" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tags: honor COMPILED_SOURCE with apart output directory to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tags-honor-compiled_source-with-apart-output-directory.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Robert Jarzmik <robert.jarzmik(a)free.fr> Date: Mon, 5 Jun 2017 13:59:15 +0200 Subject: tags: honor COMPILED_SOURCE with apart output directory From: Robert Jarzmik <robert.jarzmik(a)free.fr> [ Upstream commit cbf52a3e6a8a92beec6e0c70abf4111cd8f8faf7 ] When the kernel is compiled with an "O=" argument, the object files are not in the source tree, but in the build tree. This patch fixes O= build by looking for object files in the build tree. Fixes: 923e02ecf3f8 ("scripts/tags.sh: Support compiled source") Signed-off-by: Robert Jarzmik <robert.jarzmik(a)free.fr> Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- scripts/tags.sh | 1 + 1 file changed, 1 insertion(+) --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -106,6 +106,7 @@ all_compiled_sources() case "$i" in *.[cS]) j=${i/\.[cS]/\.o} + j="${j#$tree}" if [ -e $j ]; then echo $i fi Patches currently in stable-queue which might be from robert.jarzmik(a)free.fr are queue-3.18/tags-honor-compiled_source-with-apart-output-directory.patch

7 years, 7 months

1
0
0 0

Patch "staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-wlan-ng-prism2mgmt.c-fixed-a-double-endian-conversion-before-calling-hfa384x_drvr_setconfig16-also-fixes-relative-sparse-warning.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Andrea della Porta <sfaragnaus(a)gmail.com> Date: Sat, 29 Apr 2017 07:30:23 +0100 Subject: staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning From: Andrea della Porta <sfaragnaus(a)gmail.com> [ Upstream commit dea20579a69ab68cdca6adf79bb7c0c162eb9b72 ] staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion. cpu_to_le16() was called twice first in prism2mgmt_scan and again inside hfa384x_drvr_setconfig16() for the same variable, hence it was swapped twice. Incidentally, it also fixed the following sparse warning: drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types) drivers/staging/wlan-ng/prism2mgmt.c:173:30: expected unsigned short [unsigned] [usertype] word drivers/staging/wlan-ng/prism2mgmt.c:173:30: got restricted __le16 [usertype] <noident> Unfortunately, only compile tested. Signed-off-by: Andrea della Porta <sfaragnaus(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/staging/wlan-ng/prism2mgmt.c +++ b/drivers/staging/wlan-ng/prism2mgmt.c @@ -169,7 +169,7 @@ int prism2mgmt_scan(wlandevice_t *wlande hw->ident_sta_fw.variant) > HFA384x_FIRMWARE_VERSION(1, 5, 0)) { if (msg->scantype.data != P80211ENUM_scantype_active) - word = cpu_to_le16(msg->maxchanneltime.data); + word = msg->maxchanneltime.data; else word = 0; Patches currently in stable-queue which might be from sfaragnaus(a)gmail.com are queue-3.18/staging-wlan-ng-prism2mgmt.c-fixed-a-double-endian-conversion-before-calling-hfa384x_drvr_setconfig16-also-fixes-relative-sparse-warning.patch

7 years, 7 months

1
0
0 0

Patch "SMB2: Fix share type handling" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled SMB2: Fix share type handling to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: smb2-fix-share-type-handling.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Fri, 12 May 2017 17:59:32 +0200 Subject: SMB2: Fix share type handling From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 ] In fs/cifs/smb2pdu.h, we have: #define SMB2_SHARE_TYPE_DISK 0x01 #define SMB2_SHARE_TYPE_PIPE 0x02 #define SMB2_SHARE_TYPE_PRINT 0x03 Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can never trigger and printer share would be interpreted as disk share. So, test the ShareType value for equality instead. Fixes: faaf946a7d5b ("CIFS: Add tree connect/disconnect capability for SMB2") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Acked-by: Aurelien Aptel <aaptel(a)suse.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/smb2pdu.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -921,15 +921,19 @@ SMB2_tcon(const unsigned int xid, struct goto tcon_exit; } - if (rsp->ShareType & SMB2_SHARE_TYPE_DISK) + switch (rsp->ShareType) { + case SMB2_SHARE_TYPE_DISK: cifs_dbg(FYI, "connection to disk share\n"); - else if (rsp->ShareType & SMB2_SHARE_TYPE_PIPE) { + break; + case SMB2_SHARE_TYPE_PIPE: tcon->ipc = true; cifs_dbg(FYI, "connection to pipe share\n"); - } else if (rsp->ShareType & SMB2_SHARE_TYPE_PRINT) { - tcon->print = true; + break; + case SMB2_SHARE_TYPE_PRINT: + tcon->ipc = true; cifs_dbg(FYI, "connection to printer\n"); - } else { + break; + default: cifs_dbg(VFS, "unknown share type %d\n", rsp->ShareType); rc = -EOPNOTSUPP; goto tcon_error_exit; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-3.18/edac-mv64x60-fix-an-error-handling-path.patch queue-3.18/smb2-fix-share-type-handling.patch

7 years, 7 months

1
0
0 0

Patch "sparc64: ldc abort during vds iso boot" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sparc64: ldc abort during vds iso boot to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sparc64-ldc-abort-during-vds-iso-boot.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Jag Raman <jag.raman(a)oracle.com> Date: Fri, 9 Jun 2017 12:29:31 -0400 Subject: sparc64: ldc abort during vds iso boot From: Jag Raman <jag.raman(a)oracle.com> [ Upstream commit 6c95483b768c62f8ee933ae08a1bdbcb78b5410f ] Orabug: 20902628 When an ldc control-only packet is received during data exchange in read_nonraw(), a new rx head is calculated but the rx queue head is not actually advanced (rx_set_head() is not called) and a branch is taken to 'no_data' at which point two things can happen depending on the value of the newly calculated rx head and the current rx tail: - If the rx queue is determined to be not empty, then the wrong packet is picked up. - If the rx queue is determined to be empty, then a read error (EAGAIN) is eventually returned since it is falsely assumed that more data was expected. The fix is to update the rx head and return in case of a control only packet during data exchange. Signed-off-by: Jagannathan Raman <jag.raman(a)oracle.com> Reviewed-by: Aaron Young <aaron.young(a)oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre(a)oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh(a)oracle.com> Reviewed-by: Liam Merwick <liam.merwick(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sparc/kernel/ldc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1693,9 +1693,14 @@ static int read_nonraw(struct ldc_channe lp->rcv_nxt = p->seqid; + /* + * If this is a control-only packet, there is nothing + * else to do but advance the rx queue since the packet + * was already processed above. + */ if (!(p->type & LDC_DATA)) { new = rx_advance(lp, new); - goto no_data; + break; } if (p->stype & (LDC_ACK | LDC_NACK)) { err = data_ack_nack(lp, p); Patches currently in stable-queue which might be from jag.raman(a)oracle.com are queue-3.18/sparc64-ldc-abort-during-vds-iso-boot.patch

7 years, 7 months

1
0
0 0

Patch "skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Date: Sun, 4 Jun 2017 04:16:22 +0200 Subject: skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 48a1df65334b74bd7531f932cca5928932abf769 ] This is a defense-in-depth measure in response to bugs like 4d6fa57b4dab ("macsec: avoid heap overflow in skb_to_sgvec"). There's not only a potential overflow of sglist items, but also a stack overflow potential, so we fix this by limiting the amount of recursion this function is allowed to do. Not actually providing a bounded base case is a future disaster that we can easily avoid here. As a small matter of house keeping, we take this opportunity to move the documentation comment over the actual function the documentation is for. While this could be implemented by using an explicit stack of skbuffs, when implementing this, the function complexity increased considerably, and I don't think such complexity and bloat is actually worth it. So, instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS, and measured the stack usage there. I also reverted the recent MIPS changes that give it a separate IRQ stack, so that I could experience some worst-case situations. I found that limiting it to 24 layers deep yielded a good stack usage with room for safety, as well as being much deeper than any driver actually ever creates. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Cc: Steffen Klassert <steffen.klassert(a)secunet.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: David Howells <dhowells(a)redhat.com> Cc: Sabrina Dubroca <sd(a)queasysnail.net> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/skbuff.h | 8 +++--- net/core/skbuff.c | 65 +++++++++++++++++++++++++++++++------------------ 2 files changed, 46 insertions(+), 27 deletions(-) --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -845,10 +845,10 @@ struct sk_buff *skb_realloc_headroom(str unsigned int headroom); struct sk_buff *skb_copy_expand(const struct sk_buff *skb, int newheadroom, int newtailroom, gfp_t priority); -int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, - int offset, int len); -int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, - int len); +int __must_check skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, + int offset, int len); +int __must_check skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, + int offset, int len); int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer); int skb_pad(struct sk_buff *skb, int pad); #define dev_kfree_skb(a) consume_skb(a) --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3285,24 +3285,18 @@ void __init skb_init(void) NULL); } -/** - * skb_to_sgvec - Fill a scatter-gather list from a socket buffer - * @skb: Socket buffer containing the buffers to be mapped - * @sg: The scatter-gather list to map into - * @offset: The offset into the buffer's contents to start mapping - * @len: Length of buffer space to be mapped - * - * Fill the specified scatter-gather list with mappings/pointers into a - * region of the buffer space attached to a socket buffer. - */ static int -__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len, + unsigned int recursion_level) { int start = skb_headlen(skb); int i, copy = start - offset; struct sk_buff *frag_iter; int elt = 0; + if (unlikely(recursion_level >= 24)) + return -EMSGSIZE; + if (copy > 0) { if (copy > len) copy = len; @@ -3321,6 +3315,8 @@ __skb_to_sgvec(struct sk_buff *skb, stru end = start + skb_frag_size(&skb_shinfo(skb)->frags[i]); if ((copy = end - offset) > 0) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + if (unlikely(elt && sg_is_last(&sg[elt - 1]))) + return -EMSGSIZE; if (copy > len) copy = len; @@ -3335,16 +3331,22 @@ __skb_to_sgvec(struct sk_buff *skb, stru } skb_walk_frags(skb, frag_iter) { - int end; + int end, ret; WARN_ON(start > offset + len); end = start + frag_iter->len; if ((copy = end - offset) > 0) { + if (unlikely(elt && sg_is_last(&sg[elt - 1]))) + return -EMSGSIZE; + if (copy > len) copy = len; - elt += __skb_to_sgvec(frag_iter, sg+elt, offset - start, - copy); + ret = __skb_to_sgvec(frag_iter, sg+elt, offset - start, + copy, recursion_level + 1); + if (unlikely(ret < 0)) + return ret; + elt += ret; if ((len -= copy) == 0) return elt; offset += copy; @@ -3355,6 +3357,31 @@ __skb_to_sgvec(struct sk_buff *skb, stru return elt; } +/** + * skb_to_sgvec - Fill a scatter-gather list from a socket buffer + * @skb: Socket buffer containing the buffers to be mapped + * @sg: The scatter-gather list to map into + * @offset: The offset into the buffer's contents to start mapping + * @len: Length of buffer space to be mapped + * + * Fill the specified scatter-gather list with mappings/pointers into a + * region of the buffer space attached to a socket buffer. Returns either + * the number of scatterlist items used, or -EMSGSIZE if the contents + * could not fit. + */ +int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +{ + int nsg = __skb_to_sgvec(skb, sg, offset, len, 0); + + if (nsg <= 0) + return nsg; + + sg_mark_end(&sg[nsg - 1]); + + return nsg; +} +EXPORT_SYMBOL_GPL(skb_to_sgvec); + /* As compared with skb_to_sgvec, skb_to_sgvec_nomark only map skb to given * sglist without mark the sg which contain last skb data as the end. * So the caller can mannipulate sg list as will when padding new data after @@ -3377,19 +3404,11 @@ __skb_to_sgvec(struct sk_buff *skb, stru int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) { - return __skb_to_sgvec(skb, sg, offset, len); + return __skb_to_sgvec(skb, sg, offset, len, 0); } EXPORT_SYMBOL_GPL(skb_to_sgvec_nomark); -int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) -{ - int nsg = __skb_to_sgvec(skb, sg, offset, len); - sg_mark_end(&sg[nsg - 1]); - - return nsg; -} -EXPORT_SYMBOL_GPL(skb_to_sgvec); /** * skb_cow_data - Check that a socket buffer's data buffers are writable Patches currently in stable-queue which might be from Jason(a)zx2c4.com are queue-3.18/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-3.18/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-3.18/rxrpc-check-return-value-of-skb_to_sgvec-always.patch queue-3.18/virtio_net-check-return-value-of-skb_to_sgvec-always.patch queue-3.18/virtio_net-check-return-value-of-skb_to_sgvec-in-one-more-location.patch

7 years, 7 months

1
0
0 0

Patch "signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Sat, 19 Aug 2017 15:26:01 -0500 Subject: signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit cf4674c46c66e45f238f8f7e81af2a444b970c0a ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return SIL_FAULT and the appropriate fields will be reliably copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: Paul Mackerras <paulus(a)samba.org> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: linuxppc-dev(a)lists.ozlabs.org Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx") Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++++++++++++ arch/powerpc/kernel/traps.c | 10 +++++----- 2 files changed, 20 insertions(+), 5 deletions(-) --- a/arch/powerpc/include/uapi/asm/siginfo.h +++ b/arch/powerpc/include/uapi/asm/siginfo.h @@ -17,4 +17,19 @@ #undef NSIGTRAP #define NSIGTRAP 4 +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGTRAP si_codes + */ +#ifdef __KERNEL__ +#define TRAP_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + + #endif /* _ASM_POWERPC_SIGINFO_H */ --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -769,7 +769,7 @@ void unknown_exception(struct pt_regs *r printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); exception_exit(prev_state); } @@ -791,7 +791,7 @@ bail: void RunModeException(struct pt_regs *regs) { - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); } void __kprobes single_step_exception(struct pt_regs *regs) @@ -826,7 +826,7 @@ static void emulate_single_step(struct p static inline int __parse_fpscr(unsigned long fpscr) { - int ret = 0; + int ret = FPE_FIXME; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) @@ -1742,7 +1742,7 @@ void SPEFloatingPointException(struct pt extern int do_spe_mathemu(struct pt_regs *regs); unsigned long spefscr; int fpexc_mode; - int code = 0; + int code = FPE_FIXME; int err; flush_spe_to_thread(current); @@ -1811,7 +1811,7 @@ void SPEFloatingPointRoundException(stru printk(KERN_ERR "unrecognized spe instruction " "in %s at %lx\n", current->comm, regs->nip); } else { - _exception(SIGFPE, regs, 0, regs->nip); + _exception(SIGFPE, regs, FPE_FIXME, regs->nip); return; } } Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-3.18/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-3.18/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-3.18/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-3.18/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 7 months

1
0
0 0

Patch "signal/metag: Document a conflict with SI_USER with SIGFPE" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/metag: Document a conflict with SI_USER with SIGFPE to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Tue, 1 Aug 2017 10:37:40 -0500 Subject: signal/metag: Document a conflict with SI_USER with SIGFPE From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit b80328be53c215346b153769267b38f531d89b4f ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result hat uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the appropriate fields will reliably be copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: James Hogan <james.hogan(a)imgtec.com> Cc: linux-metag(a)vger.kernel.org Ref: ac919f0883e5 ("metag: Traps") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/metag/include/uapi/asm/siginfo.h | 7 +++++++ arch/metag/kernel/traps.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) --- a/arch/metag/include/uapi/asm/siginfo.h +++ b/arch/metag/include/uapi/asm/siginfo.h @@ -5,4 +5,11 @@ #include <asm-generic/siginfo.h> +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + #endif --- a/arch/metag/kernel/traps.c +++ b/arch/metag/kernel/traps.c @@ -732,7 +732,7 @@ TBIRES fpe_handler(TBIRES State, int Sig else if (error_state & TXSTAT_FPE_INEXACT_BIT) info.si_code = FPE_FLTRES; else - info.si_code = 0; + info.si_code = FPE_FIXME; info.si_errno = 0; info.si_addr = (__force void __user *)regs->ctx.CurrPC; force_sig_info(SIGFPE, &info, current); Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-3.18/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-3.18/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-3.18/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-3.18/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 7 months

1
0
0 0

Patch "signal/arm: Document conflicts with SI_USER and SIGFPE" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/arm: Document conflicts with SI_USER and SIGFPE to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-arm-document-conflicts-with-si_user-and-sigfpe.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Thu, 17 Aug 2017 17:07:46 -0500 Subject: signal/arm: Document conflicts with SI_USER and SIGFPE From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit 7771c66457004977b616bab785209f49d164f527 ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME, siginfo_layout will now return SIL_FAULT and the appropriate fields will be reliably copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: Russell King <rmk(a)flint.arm.linux.org.uk> Cc: linux-arm-kernel(a)lists.infradead.org Ref: 451436b7bbb2 ("[ARM] Add support code for ARM hardware vector floating point") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/include/uapi/asm/siginfo.h | 13 +++++++++++++ arch/arm/vfp/vfpmodule.c | 2 +- 2 files changed, 14 insertions(+), 1 deletion(-) create mode 100644 arch/arm/include/uapi/asm/siginfo.h --- /dev/null +++ b/arch/arm/include/uapi/asm/siginfo.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SIGINFO_H +#define __ASM_SIGINFO_H + +#include <asm-generic/siginfo.h> + +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +#endif --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -261,7 +261,7 @@ static void vfp_raise_exceptions(u32 exc if (exceptions == VFP_EXCEPTION_ERROR) { vfp_panic("unhandled bounce", inst); - vfp_raise_sigfpe(0, regs); + vfp_raise_sigfpe(FPE_FIXME, regs); return; } Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-3.18/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-3.18/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-3.18/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-3.18/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 7 months

1
0
0 0

Patch "sh_eth: Use platform device for printing before register_netdev()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sh_eth: Use platform device for printing before register_netdev() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sh_eth-use-platform-device-for-printing-before-register_netdev.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Thu, 18 May 2017 15:01:34 +0200 Subject: sh_eth: Use platform device for printing before register_netdev() From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ] The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2933,7 +2933,7 @@ static int sh_eth_drv_probe(struct platf /* MDIO bus init */ ret = sh_mdio_init(mdp, pd); if (ret) { - dev_err(&ndev->dev, "failed to initialise MDIO\n"); + dev_err(&pdev->dev, "failed to initialise MDIO\n"); goto out_release; } Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-3.18/sh_eth-use-platform-device-for-printing-before-register_netdev.patch

7 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror