- Linux-stable-mirror - lists.linaro.org

Patch "bnx2x: Allow vfs to disable txvlan offload" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Allow vfs to disable txvlan offload to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-allow-vfs-to-disable-txvlan-offload.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> Date: Fri, 9 Jun 2017 17:17:01 +0300 Subject: bnx2x: Allow vfs to disable txvlan offload From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> [ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ] VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3876,15 +3876,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b /* when transmitting in a vf, start bd must hold the ethertype * for fw to enforce it */ + u16 vlan_tci = 0; #ifndef BNX2X_STOP_ON_ERROR - if (IS_VF(bp)) + if (IS_VF(bp)) { #endif - tx_start_bd->vlan_or_ethertype = - cpu_to_le16(ntohs(eth->h_proto)); + /* Still need to consider inband vlan for enforced */ + if (__vlan_get_tag(skb, &vlan_tci)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_INBAND_VLAN << + ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tci); + } #ifndef BNX2X_STOP_ON_ERROR - else + } else { /* used by FW for packet accounting */ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } #endif } Patches currently in stable-queue which might be from Yuval.Mintz(a)cavium.com are queue-3.18/bnx2x-allow-vfs-to-disable-txvlan-offload.patch

7 years, 7 months

1
0
0 0

Patch "Bluetooth: Send HCI Set Event Mask Page 2 command only when needed" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: Send HCI Set Event Mask Page 2 command only when needed to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Marcel Holtmann <marcel(a)holtmann.org> Date: Fri, 9 Jun 2017 18:43:56 +0200 Subject: Bluetooth: Send HCI Set Event Mask Page 2 command only when needed From: Marcel Holtmann <marcel(a)holtmann.org> [ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Reported-by: Sedat Dilek <sedat.dilek(a)gmail.com> Tested-by: Sedat Dilek <sedat.dilek(a)gmail.com> Signed-off-by: Szymon Janc <szymon.janc(a)codecoup.pl> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bluetooth/hci_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1635,6 +1635,7 @@ static void hci_set_event_mask_page_2(st { struct hci_dev *hdev = req->hdev; u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + bool changed = false; /* If Connectionless Slave Broadcast master role is supported * enable all necessary events for it. @@ -1644,6 +1645,7 @@ static void hci_set_event_mask_page_2(st events[1] |= 0x80; /* Synchronization Train Complete */ events[2] |= 0x10; /* Slave Page Response Timeout */ events[2] |= 0x20; /* CSB Channel Map Change */ + changed = true; } /* If Connectionless Slave Broadcast slave role is supported @@ -1654,13 +1656,24 @@ static void hci_set_event_mask_page_2(st events[2] |= 0x02; /* CSB Receive */ events[2] |= 0x04; /* CSB Timeout */ events[2] |= 0x08; /* Truncated Page Complete */ + changed = true; } /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) + if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { events[2] |= 0x80; + changed = true; + } - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); + /* Some Broadcom based controllers indicate support for Set Event + * Mask Page 2 command, but then actually do not support it. Since + * the default value is all bits set to zero, the command is only + * required if the event mask has to be changed. In case no change + * to the event mask is needed, skip this command. + */ + if (changed) + hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, + sizeof(events), events); } static void hci_init3_req(struct hci_request *req, unsigned long opt) Patches currently in stable-queue which might be from marcel(a)holtmann.org are queue-3.18/bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch

7 years, 7 months

1
0
0 0

Patch "block: fix an error code in add_partition()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled block: fix an error code in add_partition() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: block-fix-an-error-code-in-add_partition.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Tue, 23 May 2017 17:28:36 +0300 Subject: block: fix an error code in add_partition() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 7bd897cfce1eb373892d35d7f73201b0f9b221c4 ] We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/partition-generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -309,8 +309,10 @@ struct hd_struct *add_partition(struct g if (info) { struct partition_meta_info *pinfo = alloc_part_info(disk); - if (!pinfo) + if (!pinfo) { + err = -ENOMEM; goto out_free_stats; + } memcpy(pinfo, info, sizeof(*info)); p->info = pinfo; } Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-3.18/block-fix-an-error-code-in-add_partition.patch queue-3.18/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-3.18/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 7 months

1
0
0 0

Patch "bio-integrity: Do not allocate integrity context for bio w/o data" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bio-integrity: Do not allocate integrity context for bio w/o data to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Dmitry Monakhov <dmonakhov(a)openvz.org> Date: Wed, 10 May 2017 19:20:44 +0400 Subject: bio-integrity: Do not allocate integrity context for bio w/o data From: Dmitry Monakhov <dmonakhov(a)openvz.org> [ Upstream commit 3116a23bb30272d74ea81baf5d0ee23f602dd15b ] If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Dmitry Monakhov <dmonakhov(a)openvz.org> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/bio-integrity.c | 3 +++ 1 file changed, 3 insertions(+) --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -165,6 +165,9 @@ bool bio_integrity_enabled(struct bio *b if (!bio_is_rw(bio)) return false; + if (!bio_sectors(bio)) + return false; + /* Already protected? */ if (bio_integrity(bio)) return false; Patches currently in stable-queue which might be from dmonakhov(a)openvz.org are queue-3.18/bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch

7 years, 7 months

1
0
0 0

Patch "bcache: stop writeback thread after detaching" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: stop writeback thread after detaching to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-stop-writeback-thread-after-detaching.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:19 -0800 Subject: bcache: stop writeback thread after detaching From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/super.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -921,6 +921,12 @@ static void cached_dev_detach_finish(str mutex_lock(&bch_register_lock); + cancel_delayed_work_sync(&dc->writeback_rate_update); + if (!IS_ERR_OR_NULL(dc->writeback_thread)) { + kthread_stop(dc->writeback_thread); + dc->writeback_thread = NULL; + } + memset(&dc->sb.set_uuid, 0, 16); SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE); Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-3.18/bcache-segregate-flash-only-volume-write-streams.patch queue-3.18/bcache-stop-writeback-thread-after-detaching.patch

7 years, 7 months

1
0
0 0

Patch "ath5k: fix memory leak on buf on failed eeprom read" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath5k: fix memory leak on buf on failed eeprom read to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Wed, 3 May 2017 15:26:00 +0100 Subject: ath5k: fix memory leak on buf on failed eeprom read From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ] The AR5K_EEPROM_READ macro returns with -EIO if a read error occurs causing a memory leak on the allocated buffer buf. Fix this by explicitly calling ath5k_hw_nvram_read and exiting on the via the freebuf label that performs the necessary free'ing of buf when a read error occurs. Detected by CoverityScan, CID#1248782 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath5k/debug.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -939,7 +939,10 @@ static int open_file_eeprom(struct inode } for (i = 0; i < eesize; ++i) { - AR5K_EEPROM_READ(i, val); + if (!ath5k_hw_nvram_read(ah, i, &val)) { + ret = -EIO; + goto freebuf; + } buf[i] = val; } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-3.18/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-3.18/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-3.18/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-3.18/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

7 years, 7 months

1
0
0 0

Patch "bcache: segregate flash only volume write streams" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: segregate flash only volume write streams to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-segregate-flash-only-volume-write-streams.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:21 -0800 Subject: bcache: segregate flash only volume write streams From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/alloc.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) --- a/drivers/md/bcache/alloc.c +++ b/drivers/md/bcache/alloc.c @@ -514,15 +514,21 @@ struct open_bucket { /* * We keep multiple buckets open for writes, and try to segregate different - * write streams for better cache utilization: first we look for a bucket where - * the last write to it was sequential with the current write, and failing that - * we look for a bucket that was last used by the same task. + * write streams for better cache utilization: first we try to segregate flash + * only volume write streams from cached devices, secondly we look for a bucket + * where the last write to it was sequential with the current write, and + * failing that we look for a bucket that was last used by the same task. * * The ideas is if you've got multiple tasks pulling data into the cache at the * same time, you'll get better cache utilization if you try to segregate their * data and preserve locality. * - * For example, say you've starting Firefox at the same time you're copying a + * For example, dirty sectors of flash only volume is not reclaimable, if their + * dirty sectors mixed with dirty sectors of cached device, such buckets will + * be marked as dirty and won't be reclaimed, though the dirty data of cached + * device have been written back to backend device. + * + * And say you've starting Firefox at the same time you're copying a * bunch of files. Firefox will likely end up being fairly hot and stay in the * cache awhile, but the data you copied might not be; if you wrote all that * data to the same buckets it'd get invalidated at the same time. @@ -539,7 +545,10 @@ static struct open_bucket *pick_data_buc struct open_bucket *ret, *ret_task = NULL; list_for_each_entry_reverse(ret, &c->data_buckets, list) - if (!bkey_cmp(&ret->key, search)) + if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) != + UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)])) + continue; + else if (!bkey_cmp(&ret->key, search)) goto found; else if (ret->last_write_point == write_point) ret_task = ret; Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-3.18/bcache-segregate-flash-only-volume-write-streams.patch queue-3.18/bcache-stop-writeback-thread-after-detaching.patch

7 years, 7 months

1
0
0 0

Patch "ata: libahci: properly propagate return value of platform_get_irq()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ata: libahci: properly propagate return value of platform_get_irq() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Date: Tue, 16 May 2017 14:06:12 +0200 Subject: ata: libahci: properly propagate return value of platform_get_irq() From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> [ Upstream commit c034640a32f8456018d9c8c83799ead683046b95 ] When platform_get_irq() fails, it returns an error code, which libahci_platform and replaces it by -EINVAL. This commit fixes that by propagating the error code. It fixes the situation where platform_get_irq() returns -EPROBE_DEFER because the interrupt controller is not available yet, and generally looks like the right thing to do. We pay attention to not show the "no irq" message when we are in an EPROBE_DEFER situation, because the driver probing will be retried later on, once the interrupt controller becomes available to provide the interrupt. Signed-off-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Tejun Heo <tj(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/ata/libahci_platform.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -419,8 +419,9 @@ int ahci_platform_init_host(struct platf irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; + if (irq != -EPROBE_DEFER) + dev_err(dev, "no irq\n"); + return irq; } /* prepare host */ Patches currently in stable-queue which might be from thomas.petazzoni(a)free-electrons.com are queue-3.18/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch

7 years, 7 months

1
0
0 0

Patch "async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: async_tx-fix-dma_prep_fence-usage-in-do_async_gen_syndrome.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Anup Patel <anup.patel(a)broadcom.com> Date: Mon, 15 May 2017 10:34:53 +0530 Subject: async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() From: Anup Patel <anup.patel(a)broadcom.com> [ Upstream commit baae03a0e2497f49704628fd0aaf993cf98e1b99 ] The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output of Tx descriptor is to be used by next/dependent Tx descriptor. The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome() when calling dma->device_prep_dma_pq() under following conditions: 1. ASYNC_TX_FENCE not set in submit->flags 2. DMA_PREP_FENCE not set in dma_flags 3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags) This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking inspiration from do_async_xor() implementation. Signed-off-by: Anup Patel <anup.patel(a)broadcom.com> Reviewed-by: Ray Jui <ray.jui(a)broadcom.com> Reviewed-by: Scott Branden <scott.branden(a)broadcom.com> Acked-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/async_tx/async_pq.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *c dma_addr_t dma_dest[2]; int src_off = 0; - if (submit->flags & ASYNC_TX_FENCE) - dma_flags |= DMA_PREP_FENCE; - while (src_cnt > 0) { submit->flags = flags_orig; pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags)); @@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *c if (cb_fn_orig) dma_flags |= DMA_PREP_INTERRUPT; } + if (submit->flags & ASYNC_TX_FENCE) + dma_flags |= DMA_PREP_FENCE; /* Drivers force forward progress in case they can not provide * a descriptor Patches currently in stable-queue which might be from anup.patel(a)broadcom.com are queue-3.18/async_tx-fix-dma_prep_fence-usage-in-do_async_gen_syndrome.patch

7 years, 7 months

1
0
0 0

Patch "arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Will Deacon <will.deacon(a)arm.com> Date: Wed, 5 Apr 2017 11:14:05 +0100 Subject: arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage From: Will Deacon <will.deacon(a)arm.com> [ Upstream commit 5f16a046f8e144c294ef98cd29d9458b5f8273e5 ] FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg field as a shift value, potentially leading to a left shift value that is negative or with an absolute value that is significantly larger then the size of the type. UBSAN chokes with: ================================================================================ UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13 shift exponent -1 is negative CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11 Hardware name: linux,dummy-virt (DT) Call trace: [<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73 [<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228 [<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline] [<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52 [<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164 [<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421 [<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline] [<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline] [<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231 [<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline] [<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249 [<ffff200008084770>] el0_svc_naked+0x24/0x28 ================================================================================ syz-executor1 uses obsolete (PF_INET,SOCK_PACKET) sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT This patch attempts to fix some of this by: * Making encoded_op an unsigned type, so we can shift it left even if the top bit is set. * Casting to signed prior to shifting right when extracting oparg and cmparg * Consider only the bottom 5 bits of oparg when using it as a left-shift value. Whilst I think this catches all of the issues, I'd much prefer to remove this stuff, as I think it's unused and the bugs are copy-pasted between a bunch of architectures. Reviewed-by: Robin Murphy <robin.murphy(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm64/include/asm/futex.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -44,16 +44,16 @@ : "memory") static inline int -futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) +futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr) { int op = (encoded_op >> 28) & 7; int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; + int oparg = (int)(encoded_op << 8) >> 20; + int cmparg = (int)(encoded_op << 20) >> 20; int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; + oparg = 1U << (oparg & 0x1f); if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; Patches currently in stable-queue which might be from will.deacon(a)arm.com are queue-3.18/arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch

7 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror