- Linux-stable-mirror - lists.linaro.org

Patch "spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: spi-omap2-mcspi-poll-omap2_mcspi_chstat_rxs-for-pio-transfer.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Wed, 22 Mar 2017 09:18:26 +0900 Subject: spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 812613591cb652344186c4cd912304ed02138566 ] When running the spi-loopback-test with slower clock rate like 10 KHz, the test for 251 bytes transfer was failed. This failure triggered an spi-omap2-mcspi's error message "DMA RX last word empty". This message means that PIO for reading the remaining bytes due to the DMA transfer length reduction is failed. This problem can be fixed by polling OMAP2_MCSPI_CHSTAT_RXS bit in channel status register to wait until the receive buffer register is filled. Cc: Mark Brown <broonie(a)kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/spi/spi-omap2-mcspi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -457,6 +457,8 @@ omap2_mcspi_rx_dma(struct spi_device *sp int elements = 0; int word_len, element_count; struct omap2_mcspi_cs *cs = spi->controller_state; + void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; count = xfer->len; @@ -517,8 +519,8 @@ omap2_mcspi_rx_dma(struct spi_device *sp if (l & OMAP2_MCSPI_CHCONF_TURBO) { elements--; - if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) - & OMAP2_MCSPI_CHSTAT_RXS)) { + if (!mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS)) { u32 w; w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); @@ -536,8 +538,7 @@ omap2_mcspi_rx_dma(struct spi_device *sp return count; } } - if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) - & OMAP2_MCSPI_CHSTAT_RXS)) { + if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) { u32 w; w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-4.4/spi-omap2-mcspi-poll-omap2_mcspi_chstat_rxs-for-pio-transfer.patch

7 years, 6 months

1
0
0 0

Patch "selinux: check for address length in selinux_socket_bind()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selinux: check for address length in selinux_socket_bind() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selinux-check-for-address-length-in-selinux_socket_bind.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Alexander Potapenko <glider(a)google.com> Date: Mon, 6 Mar 2017 19:46:14 +0100 Subject: selinux: check for address length in selinux_socket_bind() From: Alexander Potapenko <glider(a)google.com> [ Upstream commit e2f586bd83177d22072b275edd4b8b872daba924 ] KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in selinux_socket_bind(): ================================================================== BUG: KMSAN: use of unitialized memory inter: 0 CPU: 3 PID: 1074 Comm: packet2 Tainted: G B 4.8.0-rc6+ #1916 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff8800882ffb08 ffffffff825759c8 ffff8800882ffa48 ffffffff818bf551 ffffffff85bab870 0000000000000092 ffffffff85bab550 0000000000000000 0000000000000092 00000000bb0009bb 0000000000000002 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff825759c8>] dump_stack+0x238/0x290 lib/dump_stack.c:51 [<ffffffff818bdee6>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1008 [<ffffffff818bf0fb>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424 [<ffffffff822dae71>] selinux_socket_bind+0xf41/0x1080 security/selinux/hooks.c:4288 [<ffffffff8229357c>] security_socket_bind+0x1ec/0x240 security/security.c:1240 [<ffffffff84265d98>] SYSC_bind+0x358/0x5f0 net/socket.c:1366 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292 [<ffffffff8518217c>] entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.o:? chained origin: 00000000ba6009bb [<ffffffff810bb7a7>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322 [< inline >] kmsan_save_stack mm/kmsan/kmsan.c:337 [<ffffffff818bd2b8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:530 [<ffffffff818bf033>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380 [<ffffffff84265b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292 [<ffffffff8518217c>] return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.o:? origin description: ----address@SYSC_bind (origin=00000000b8c00900) ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) , when I run the following program as root: ======================================================= #include <string.h> #include <sys/socket.h> #include <netinet/in.h> int main(int argc, char *argv[]) { struct sockaddr addr; int size = 0; if (argc > 1) { size = atoi(argv[1]); } memset(&addr, 0, sizeof(addr)); int fd = socket(PF_INET6, SOCK_DGRAM, IPPROTO_IP); bind(fd, &addr, size); return 0; } ======================================================= (for different values of |size| other error reports are printed). This happens because bind() unconditionally copies |size| bytes of |addr| to the kernel, leaving the rest uninitialized. Then security_socket_bind() reads the IP address bytes, including the uninitialized ones, to determine the port, or e.g. pass them further to sel_netnode_find(), which uses them to calculate a hash. Signed-off-by: Alexander Potapenko <glider(a)google.com> Acked-by: Eric Dumazet <edumazet(a)google.com> [PM: fixed some whitespace damage] Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/selinux/hooks.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4124,10 +4124,18 @@ static int selinux_socket_bind(struct so u32 sid, node_perm; if (family == PF_INET) { + if (addrlen < sizeof(struct sockaddr_in)) { + err = -EINVAL; + goto out; + } addr4 = (struct sockaddr_in *)address; snum = ntohs(addr4->sin_port); addrp = (char *)&addr4->sin_addr.s_addr; } else { + if (addrlen < SIN6_LEN_RFC2133) { + err = -EINVAL; + goto out; + } addr6 = (struct sockaddr_in6 *)address; snum = ntohs(addr6->sin6_port); addrp = (char *)&addr6->sin6_addr.s6_addr; Patches currently in stable-queue which might be from glider(a)google.com are queue-4.4/selinux-check-for-address-length-in-selinux_socket_bind.patch

7 years, 6 months

1
0
0 0

Patch "scsi: sg: close race condition in sg_remove_sfp_usercontext()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: sg: close race condition in sg_remove_sfp_usercontext() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-sg-close-race-condition-in-sg_remove_sfp_usercontext.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Hannes Reinecke <hare(a)suse.de> Date: Fri, 7 Apr 2017 09:34:17 +0200 Subject: scsi: sg: close race condition in sg_remove_sfp_usercontext() From: Hannes Reinecke <hare(a)suse.de> [ Upstream commit 97d27b0dd015e980ade63fda111fd1353276e28b ] sg_remove_sfp_usercontext() is clearing any sg requests, but needs to take 'rq_list_lock' when modifying the list. Reported-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Tested-by: Johannes Thumshirn <jthumshirn(a)suse.de> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/sg.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -535,6 +535,7 @@ sg_read(struct file *filp, char __user * } else count = (old_hdr->result == 0) ? 0 : -EIO; sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); retval = count; free_old_hdr: kfree(old_hdr); @@ -575,6 +576,7 @@ sg_new_read(Sg_fd * sfp, char __user *bu } err_out: err2 = sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); return err ? : err2 ? : count; } @@ -811,6 +813,7 @@ sg_common_write(Sg_fd * sfp, Sg_request SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp, "sg_common_write: start_req err=%d\n", k)); sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); return k; /* probably out of space --> ENOMEM */ } if (atomic_read(&sdp->detaching)) { @@ -823,6 +826,7 @@ sg_common_write(Sg_fd * sfp, Sg_request } sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); return -ENODEV; } @@ -1312,6 +1316,7 @@ sg_rq_end_io_usercontext(struct work_str struct sg_fd *sfp = srp->parentfp; sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); kref_put(&sfp->f_ref, sg_remove_sfp); } @@ -1856,8 +1861,6 @@ sg_finish_rem_req(Sg_request *srp) else sg_remove_scat(sfp, req_schp); - sg_remove_request(sfp, srp); - return ret; } @@ -2204,12 +2207,17 @@ sg_remove_sfp_usercontext(struct work_st struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work); struct sg_device *sdp = sfp->parentdp; Sg_request *srp; + unsigned long iflags; /* Cleanup any responses which were never read(). */ + write_lock_irqsave(&sfp->rq_list_lock, iflags); while (!list_empty(&sfp->rq_list)) { srp = list_first_entry(&sfp->rq_list, Sg_request, entry); sg_finish_rem_req(srp); + list_del(&srp->entry); + srp->parentfp = NULL; } + write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (sfp->reserve.bufflen > 0) { SCSI_LOG_TIMEOUT(6, sg_printk(KERN_INFO, sdp, Patches currently in stable-queue which might be from hare(a)suse.de are queue-4.4/scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch queue-4.4/scsi-sg-close-race-condition-in-sg_remove_sfp_usercontext.patch queue-4.4/scsi-dh-add-new-rdac-devices.patch

7 years, 6 months

1
0
0 0

Patch "scsi: sg: check for valid direction before starting the request" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: sg: check for valid direction before starting the request to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-sg-check-for-valid-direction-before-starting-the-request.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Johannes Thumshirn <jthumshirn(a)suse.de> Date: Fri, 7 Apr 2017 09:34:15 +0200 Subject: scsi: sg: check for valid direction before starting the request From: Johannes Thumshirn <jthumshirn(a)suse.de> [ Upstream commit 28676d869bbb5257b5f14c0c95ad3af3a7019dd5 ] Check for a valid direction before starting the request, otherwise we risk running into an assertion in the scsi midlayer checking for valid requests. [mkp: fixed typo] Signed-off-by: Johannes Thumshirn <jthumshirn(a)suse.de> Link: http://www.spinics.net/lists/linux-scsi/msg104400.html Reported-by: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Hannes Reinecke <hare(a)suse.com> Tested-by: Johannes Thumshirn <jthumshirn(a)suse.de> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/sg.c | 46 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 12 deletions(-) --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -674,18 +674,14 @@ sg_write(struct file *filp, const char _ * is a non-zero input_size, so emit a warning. */ if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) { - static char cmd[TASK_COMM_LEN]; - if (strcmp(current->comm, cmd)) { - printk_ratelimited(KERN_WARNING - "sg_write: data in/out %d/%d bytes " - "for SCSI command 0x%x-- guessing " - "data in;\n program %s not setting " - "count and/or reply_len properly\n", - old_hdr.reply_len - (int)SZ_SG_HEADER, - input_size, (unsigned int) cmnd[0], - current->comm); - strcpy(cmd, current->comm); - } + printk_ratelimited(KERN_WARNING + "sg_write: data in/out %d/%d bytes " + "for SCSI command 0x%x-- guessing " + "data in;\n program %s not setting " + "count and/or reply_len properly\n", + old_hdr.reply_len - (int)SZ_SG_HEADER, + input_size, (unsigned int) cmnd[0], + current->comm); } k = sg_common_write(sfp, srp, cmnd, sfp->timeout, blocking); return (k < 0) ? k : count; @@ -764,6 +760,29 @@ sg_new_write(Sg_fd *sfp, struct file *fi return count; } +static bool sg_is_valid_dxfer(sg_io_hdr_t *hp) +{ + switch (hp->dxfer_direction) { + case SG_DXFER_NONE: + if (hp->dxferp || hp->dxfer_len > 0) + return false; + return true; + case SG_DXFER_TO_DEV: + case SG_DXFER_FROM_DEV: + case SG_DXFER_TO_FROM_DEV: + if (!hp->dxferp || hp->dxfer_len == 0) + return false; + return true; + case SG_DXFER_UNKNOWN: + if ((!hp->dxferp && hp->dxfer_len) || + (hp->dxferp && hp->dxfer_len == 0)) + return false; + return true; + default: + return false; + } +} + static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking) @@ -784,6 +803,9 @@ sg_common_write(Sg_fd * sfp, Sg_request "sg_common_write: scsi opcode=0x%02x, cmd_size=%d\n", (int) cmnd[0], (int) hp->cmd_len)); + if (!sg_is_valid_dxfer(hp)) + return -EINVAL; + k = sg_start_req(srp, cmnd); if (k) { SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp, Patches currently in stable-queue which might be from jthumshirn(a)suse.de are queue-4.4/scsi-sg-check-for-valid-direction-before-starting-the-request.patch queue-4.4/scsi-sg-close-race-condition-in-sg_remove_sfp_usercontext.patch queue-4.4/scsi-core-scsi_get_device_flags_keyed-always-return-device-flags.patch

7 years, 6 months

1
0
0 0

Patch "scsi: ses: don't get power status of SES device slot on probe" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: ses: don't get power status of SES device slot on probe to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-ses-don-t-get-power-status-of-ses-device-slot-on-probe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> Date: Wed, 5 Apr 2017 12:18:19 -0300 Subject: scsi: ses: don't get power status of SES device slot on probe From: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> [ Upstream commit 75106523f39751390b5789b36ee1d213b3af1945 ] The commit 08024885a2a3 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> Fixes: 08024885a2a3 ("ses: Add power_status to SES device slot") Reviewed-by: Dan Williams <dan.j.williams(a)intel.com> Reviewed-by: Song Liu <songliubraving(a)fb.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/enclosure.c | 7 ++++++- drivers/scsi/ses.c | 1 - 2 files changed, 6 insertions(+), 2 deletions(-) --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -148,7 +148,7 @@ enclosure_register(struct device *dev, c for (i = 0; i < components; i++) { edev->component[i].number = -1; edev->component[i].slot = -1; - edev->component[i].power_status = 1; + edev->component[i].power_status = -1; } mutex_lock(&container_list_lock); @@ -600,6 +600,11 @@ static ssize_t get_component_power_statu if (edev->cb->get_power_status) edev->cb->get_power_status(edev, ecomp); + + /* If still uninitialized, the callback failed or does not exist. */ + if (ecomp->power_status == -1) + return (edev->cb->get_power_status) ? -EIO : -ENOTTY; + return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off"); } --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -546,7 +546,6 @@ static void ses_enclosure_data_process(s ecomp = &edev->component[components++]; if (!IS_ERR(ecomp)) { - ses_get_power_status(edev, ecomp); if (addl_desc_ptr) ses_process_descriptor( ecomp, Patches currently in stable-queue which might be from mauricfo(a)linux.vnet.ibm.com are queue-4.4/scsi-ses-don-t-get-power-status-of-ses-device-slot-on-probe.patch

7 years, 6 months

1
0
0 0

Patch "scsi: ipr: Fix missed EH wakeup" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: ipr: Fix missed EH wakeup to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-ipr-fix-missed-eh-wakeup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Brian King <brking(a)linux.vnet.ibm.com> Date: Wed, 15 Mar 2017 16:58:36 -0500 Subject: scsi: ipr: Fix missed EH wakeup From: Brian King <brking(a)linux.vnet.ibm.com> [ Upstream commit 66a0d59cdd12546ddf01d229de28b07ccf6d637f ] Following a command abort or device reset, ipr's EH handlers wait for the commands getting aborted to get sent back from the adapter prior to returning from the EH handler. This fixes up some cases where the completion handler was not getting called, which would have resulted in the EH thread waiting until it timed out, greatly extending EH time. Signed-off-by: Brian King <brking(a)linux.vnet.ibm.com> Reviewed-by: Wendy Xiong <wenxiong(a)linux.vnet.ibm.com> Tested-by: Wendy Xiong <wenxiong(a)linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/ipr.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -835,8 +835,10 @@ static void ipr_sata_eh_done(struct ipr_ qc->err_mask |= AC_ERR_OTHER; sata_port->ioasa.status |= ATA_BUSY; - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); ata_qc_complete(qc); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); } /** @@ -5864,8 +5866,10 @@ static void ipr_erp_done(struct ipr_cmnd res->in_erp = 0; } scsi_dma_unmap(ipr_cmd->scsi_cmd); - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); scsi_cmd->scsi_done(scsi_cmd); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); } /** @@ -6255,8 +6259,10 @@ static void ipr_erp_start(struct ipr_ioa } scsi_dma_unmap(ipr_cmd->scsi_cmd); - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); scsi_cmd->scsi_done(scsi_cmd); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); } /** @@ -6282,8 +6288,10 @@ static void ipr_scsi_done(struct ipr_cmn scsi_dma_unmap(scsi_cmd); spin_lock_irqsave(ipr_cmd->hrrq->lock, lock_flags); - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); scsi_cmd->scsi_done(scsi_cmd); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); spin_unlock_irqrestore(ipr_cmd->hrrq->lock, lock_flags); } else { spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); Patches currently in stable-queue which might be from brking(a)linux.vnet.ibm.com are queue-4.4/scsi-ipr-fix-missed-eh-wakeup.patch

7 years, 6 months

1
0
0 0

Patch "scsi: dh: add new rdac devices" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: dh: add new rdac devices to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-dh-add-new-rdac-devices.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Date: Fri, 17 Nov 2017 22:05:13 +0100 Subject: scsi: dh: add new rdac devices From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> [ Upstream commit 4b3aec2bbbce1c35f50e7475a9fd78d24b9ea4ea ] Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500. Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220, D240 and D280. Add STK BladeCtlr family, arrays: B210, B220, B240 and B280. These changes were done in multipath-tools time ago. Cc: NetApp RDAC team <ng-eseries-upstream-maintainers(a)netapp.com> Cc: Hannes Reinecke <hare(a)suse.de> Cc: Christophe Varoqui <christophe.varoqui(a)opensvc.com> Cc: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: James E.J. Bottomley <jejb(a)linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi(a)vger.kernel.org> Cc: device-mapper development <dm-devel(a)redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_dh.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/scsi/scsi_dh.c +++ b/drivers/scsi/scsi_dh.c @@ -56,10 +56,13 @@ static const struct scsi_dh_blist scsi_d {"IBM", "1815", "rdac", }, {"IBM", "1818", "rdac", }, {"IBM", "3526", "rdac", }, + {"IBM", "3542", "rdac", }, + {"IBM", "3552", "rdac", }, {"SGI", "TP9", "rdac", }, {"SGI", "IS", "rdac", }, - {"STK", "OPENstorage D280", "rdac", }, + {"STK", "OPENstorage", "rdac", }, {"STK", "FLEXLINE 380", "rdac", }, + {"STK", "BladeCtlr", "rdac", }, {"SUN", "CSM", "rdac", }, {"SUN", "LCSM100", "rdac", }, {"SUN", "STK6580_6780", "rdac", }, Patches currently in stable-queue which might be from xose.vazquez(a)gmail.com are queue-4.4/scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch queue-4.4/scsi-dh-add-new-rdac-devices.patch

7 years, 6 months

1
0
0 0

Patch "scsi: devinfo: apply to HP XP the same flags as Hitachi VSP" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: devinfo: apply to HP XP the same flags as Hitachi VSP to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Date: Fri, 17 Nov 2017 21:31:36 +0100 Subject: scsi: devinfo: apply to HP XP the same flags as Hitachi VSP From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> [ Upstream commit b369a0471503130cfc74f9f62071db97f48948c3 ] Commit 56f3d383f37b ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry") modified some Hitachi entries: HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. The same should have been done also for HP-rebranded. [mkp: checkpatch and tweaked commit message] Cc: Hannes Reinecke <hare(a)suse.de> Cc: Takahiro Yasui <takahiro.yasui(a)hds.com> Cc: Matthias Rudolph <Matthias.Rudolph(a)hitachivantara.com> Cc: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: James E.J. Bottomley <jejb(a)linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi(a)vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_devinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -180,7 +180,7 @@ static struct { {"HITACHI", "6586-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, {"HITACHI", "6588-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, {"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP VA7400 */ - {"HP", "OPEN-", "*", BLIST_REPORTLUN2}, /* HP XP Arrays */ + {"HP", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES}, /* HP XP Arrays */ {"HP", "NetRAID-4M", NULL, BLIST_FORCELUN}, {"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD}, {"HP", "C1557A", NULL, BLIST_FORCELUN}, Patches currently in stable-queue which might be from xose.vazquez(a)gmail.com are queue-4.4/scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch queue-4.4/scsi-dh-add-new-rdac-devices.patch

7 years, 6 months

1
0
0 0

Patch "scsi: core: scsi_get_device_flags_keyed(): Always return device flags" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: core: scsi_get_device_flags_keyed(): Always return device flags to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-core-scsi_get_device_flags_keyed-always-return-device-flags.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Bart Van Assche <bart.vanassche(a)wdc.com> Date: Mon, 4 Dec 2017 10:36:31 -0800 Subject: scsi: core: scsi_get_device_flags_keyed(): Always return device flags From: Bart Van Assche <bart.vanassche(a)wdc.com> [ Upstream commit a44c9d36509c83cf64f33b93f6ab2e63822c01eb ] Since scsi_get_device_flags_keyed() callers do not check whether or not the returned value is an error code, change that function such that it returns a flags value even if the 'key' argument is invalid. Note: since commit 28a0bc4120d3 ("scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so checking whether bit 31 is set in the return value is not sufficient to tell the difference between an error code and a flags value. Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Hannes Reinecke <hare(a)suse.com> Cc: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_devinfo.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -589,17 +589,12 @@ int scsi_get_device_flags_keyed(struct s int key) { struct scsi_dev_info_list *devinfo; - int err; devinfo = scsi_dev_info_list_find(vendor, model, key); if (!IS_ERR(devinfo)) return devinfo->flags; - err = PTR_ERR(devinfo); - if (err != -ENOENT) - return err; - - /* nothing found, return nothing */ + /* key or device not found: return nothing */ if (key != SCSI_DEVINFO_GLOBAL) return 0; Patches currently in stable-queue which might be from bart.vanassche(a)wdc.com are queue-4.4/scsi-core-scsi_get_device_flags_keyed-always-return-device-flags.patch

7 years, 6 months

1
0
0 0

Patch "sched: Stop switched_to_rt() from sending IPIs to offline CPUs" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched: Stop switched_to_rt() from sending IPIs to offline CPUs to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-stop-switched_to_rt-from-sending-ipis-to-offline-cpus.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> Date: Fri, 13 Oct 2017 17:00:18 -0700 Subject: sched: Stop switched_to_rt() from sending IPIs to offline CPUs From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> [ Upstream commit 2fe2582649aa2355f79acddb86bd4d6c5363eb63 ] The rcutorture test suite occasionally provokes a splat due to invoking rt_mutex_lock() which needs to boost the priority of a task currently sitting on a runqueue that belongs to an offline CPU: WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082 RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004 RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200 FS: 0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0 Call Trace: resched_curr+0x61/0xd0 switched_to_rt+0x8f/0xa0 rt_mutex_setprio+0x25c/0x410 task_blocks_on_rt_mutex+0x1b3/0x1f0 rt_mutex_slowlock+0xa9/0x1e0 rt_mutex_lock+0x29/0x30 rcu_boost_kthread+0x127/0x3c0 kthread+0x104/0x140 ? rcu_report_unblock_qs_rnp+0x90/0x90 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x30 Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48 But the target task's priority has already been adjusted, so the only purpose of switched_to_rt() invoking resched_curr() is to wake up the CPU running some task that needs to be preempted by the boosted task. But the CPU is offline, which presumably means that the task must be migrated to some other CPU, and that this other CPU will undertake any needed preemption at the time of migration. Because the runqueue lock is held when resched_curr() is invoked, we know that the boosted task cannot go anywhere, so it is not necessary to invoke resched_curr() in this particular case. This commit therefore makes switched_to_rt() refrain from invoking resched_curr() when the target CPU is offline. Signed-off-by: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/sched/rt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -2144,7 +2144,7 @@ static void switched_to_rt(struct rq *rq if (p->nr_cpus_allowed > 1 && rq->rt.overloaded) queue_push_tasks(rq); #endif /* CONFIG_SMP */ - if (p->prio < rq->curr->prio) + if (p->prio < rq->curr->prio && cpu_online(cpu_of(rq))) resched_curr(rq); } } Patches currently in stable-queue which might be from paulmck(a)linux.vnet.ibm.com are queue-4.4/sched-stop-resched_cpu-from-sending-ipis-to-offline-cpus.patch queue-4.4/sched-stop-switched_to_rt-from-sending-ipis-to-offline-cpus.patch queue-4.4/rcutorture-configinit-fix-build-directory-error-message.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror