- Linux-stable-mirror - lists.linaro.org

Patch "bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-need-to-unconditionally-shut-down-roce-in-bnxt_shutdown.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Ray Jui <ray.jui(a)broadcom.com> Date: Fri, 1 Dec 2017 03:13:02 -0500 Subject: bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown From: Ray Jui <ray.jui(a)broadcom.com> [ Upstream commit a7f3f939dd7d8398acebecd1ceb2e9e7ffbe91d2 ] The current 'bnxt_shutdown' implementation only invokes 'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in the path of power off (SYSTEM_POWER_OFF). While this may work in most cases, it does not work in the smart NIC case, when Linux 'reboot' command is initiated from the Linux that runs on the ARM cores of the NIC card. In this particular case, Linux 'reboot' results in a system 'L3' level reset where the entire ARM and associated subsystems are being reset, but at the same time, Nitro core is being kept in sane state (to allow external PCIe connected servers to continue to work). Without properly shutting down RoCE and freeing all associated resources, it results in the ARM core to hang immediately after the 'reboot' By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the above issue Fixes: 0efd2fc65c92 ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.") Signed-off-by: Ray Jui <ray.jui(a)broadcom.com> Signed-off-by: Michael Chan <michael.chan(a)broadcom.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8218,8 +8218,9 @@ static void bnxt_shutdown(struct pci_dev if (netif_running(dev)) dev_close(dev); + bnxt_ulp_shutdown(bp); + if (system_state == SYSTEM_POWER_OFF) { - bnxt_ulp_shutdown(bp); bnxt_clear_int_mode(bp); pci_wake_from_d3(pdev, bp->wol); pci_set_power_state(pdev, PCI_D3hot); Patches currently in stable-queue which might be from ray.jui(a)broadcom.com are queue-4.14/bnxt_en-need-to-unconditionally-shut-down-roce-in-bnxt_shutdown.patch

7 years, 4 months

1
0
0 0

Patch "ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rsnd-ssi-fix-race-condition-in-rsnd_ssi_pointer_update.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Jiada Wang <jiada_wang(a)mentor.com> Date: Thu, 7 Dec 2017 22:15:38 -0800 Subject: ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update From: Jiada Wang <jiada_wang(a)mentor.com> [ Upstream commit 33f801366bdf3f8b67dfe325b84f4051a090d01e ] Currently there is race condition between set of byte_pos and wrap it around when new buffer starts. If .pointer is called in-between it will result in inconsistent pointer position be returned from .pointer callback. This patch increments buffer pointer atomically to avoid this issue. Signed-off-by: Jiada Wang <jiada_wang(a)mentor.com> Reviewed-by: Takashi Sakamoto <takashi.sakamoto(a)miraclelinux.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sh/rcar/ssi.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -449,25 +449,29 @@ static bool rsnd_ssi_pointer_update(stru int byte) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + bool ret = false; + int byte_pos; - ssi->byte_pos += byte; + byte_pos = ssi->byte_pos + byte; - if (ssi->byte_pos >= ssi->next_period_byte) { + if (byte_pos >= ssi->next_period_byte) { struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); ssi->period_pos++; ssi->next_period_byte += ssi->byte_per_period; if (ssi->period_pos >= runtime->periods) { - ssi->byte_pos = 0; + byte_pos = 0; ssi->period_pos = 0; ssi->next_period_byte = ssi->byte_per_period; } - return true; + ret = true; } - return false; + WRITE_ONCE(ssi->byte_pos, byte_pos); + + return ret; } /* @@ -838,7 +842,7 @@ static int rsnd_ssi_pointer(struct rsnd_ struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); - *pointer = bytes_to_frames(runtime, ssi->byte_pos); + *pointer = bytes_to_frames(runtime, READ_ONCE(ssi->byte_pos)); return 0; } Patches currently in stable-queue which might be from jiada_wang(a)mentor.com are queue-4.14/asoc-rsnd-ssi-fix-race-condition-in-rsnd_ssi_pointer_update.patch

7 years, 4 months

1
0
0 0

Patch "ASoC: rockchip: disable clock on error" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rockchip: disable clock on error to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rockchip-disable-clock-on-error.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> Date: Wed, 6 Dec 2017 16:03:24 +0100 Subject: ASoC: rockchip: disable clock on error From: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> [ Upstream commit c7b92172a61b91936be985cb9bc499a4ebc6489b ] Disable the clocks in rk_spdif_probe when an error occurs after one of the clocks has been enabled previously. Found by Linux Driver Verification project (linuxtesting.org). Fixes: f874b80e1571 ASoC: rockchip: Add rockchip SPDIF transceiver driver Signed-off-by: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/rockchip/rockchip_spdif.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) --- a/sound/soc/rockchip/rockchip_spdif.c +++ b/sound/soc/rockchip/rockchip_spdif.c @@ -322,26 +322,30 @@ static int rk_spdif_probe(struct platfor spdif->mclk = devm_clk_get(&pdev->dev, "mclk"); if (IS_ERR(spdif->mclk)) { dev_err(&pdev->dev, "Can't retrieve rk_spdif master clock\n"); - return PTR_ERR(spdif->mclk); + ret = PTR_ERR(spdif->mclk); + goto err_disable_hclk; } ret = clk_prepare_enable(spdif->mclk); if (ret) { dev_err(spdif->dev, "clock enable failed %d\n", ret); - return ret; + goto err_disable_clocks; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(regs)) - return PTR_ERR(regs); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto err_disable_clocks; + } spdif->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "hclk", regs, &rk_spdif_regmap_config); if (IS_ERR(spdif->regmap)) { dev_err(&pdev->dev, "Failed to initialise managed register map\n"); - return PTR_ERR(spdif->regmap); + ret = PTR_ERR(spdif->regmap); + goto err_disable_clocks; } spdif->playback_dma_data.addr = res->start + SPDIF_SMPDR; @@ -373,6 +377,10 @@ static int rk_spdif_probe(struct platfor err_pm_runtime: pm_runtime_disable(&pdev->dev); +err_disable_clocks: + clk_disable_unprepare(spdif->mclk); +err_disable_hclk: + clk_disable_unprepare(spdif->hclk); return ret; } Patches currently in stable-queue which might be from Stefan.Potyra(a)elektrobit.com are queue-4.14/asoc-rockchip-disable-clock-on-error.patch

7 years, 4 months

1
0
0 0

Patch "ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Mon, 27 Nov 2017 08:57:26 -0800 Subject: ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit d09220a887f70368afa79e850c95e74890c0a32d ] With the CMA changes from Joonsoo Kim <iamjoonsoo.kim(a)lge.com>, it was noticed that n900 stopped booting. After investigating it turned out that n900 save_secure_ram_context does some whacky virtual to physical address translation for the SRAM data address. As we now only have minimal parts of omap3 idle code copied to SRAM, running save_secure_ram_context() in SRAM is not needed. It only gets called on PM init. And it seems there's no need to ever call this from SRAM idle code. So let's just keep save_secure_ram_context() in DDR, and pass it the physical address of the parameters. We can do everything else in omap-secure.c like we already do for other secure code. And since we don't have any documentation, I still have no clue what the values for 0, 1 and 1 for the parameters might be. If somebody has figured it out, please do send a patch to add some comments. Debugged-by: Joonsoo Kim <iamjoonsoo.kim(a)lge.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-omap2/omap-secure.c | 19 +++++++++++++++++++ arch/arm/mach-omap2/omap-secure.h | 4 ++++ arch/arm/mach-omap2/pm.h | 4 ---- arch/arm/mach-omap2/pm34xx.c | 13 ++++--------- arch/arm/mach-omap2/sleep34xx.S | 26 ++++---------------------- 5 files changed, 31 insertions(+), 35 deletions(-) --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -73,6 +73,25 @@ phys_addr_t omap_secure_ram_mempool_base return omap_secure_memblock_base; } +u32 omap3_save_secure_ram(void __iomem *addr, int size) +{ + u32 ret; + u32 param[5]; + + if (size != OMAP3_SAVE_SECURE_RAM_SZ) + return OMAP3_SAVE_SECURE_RAM_SZ; + + param[0] = 4; /* Number of arguments */ + param[1] = __pa(addr); /* Physical address for saving */ + param[2] = 0; + param[3] = 1; + param[4] = 1; + + ret = save_secure_ram_context(__pa(param)); + + return ret; +} + /** * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls * @idx: The PPA API index --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -31,6 +31,8 @@ /* Maximum Secure memory storage size */ #define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K) +#define OMAP3_SAVE_SECURE_RAM_SZ 0x803F + /* Secure low power HAL API index */ #define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a #define OMAP4_HAL_SAVEHW_INDEX 0x1b @@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); extern int omap_secure_ram_reserve_memblock(void); +extern u32 save_secure_ram_context(u32 args_pa); +extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size); extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz; /* ... and its pointer from SRAM after copy */ extern void (*omap3_do_wfi_sram)(void); -/* save_secure_ram_context function pointer and size, for copy to SRAM */ -extern int save_secure_ram_context(u32 *addr); -extern unsigned int save_secure_ram_context_sz; - extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -48,6 +48,7 @@ #include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "omap-secure.h" #include "sram.h" #include "control.h" #include "vc.h" @@ -66,7 +67,6 @@ struct power_state { static LIST_HEAD(pwrst_list); -static int (*_omap_save_secure_sram)(u32 *addr); void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; @@ -121,8 +121,8 @@ static void omap3_save_secure_ram_contex * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *)(unsigned long) - __pa(omap3_secure_ram_storage)); + ret = omap3_save_secure_ram(omap3_secure_ram_storage, + OMAP3_SAVE_SECURE_RAM_SZ); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { @@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct po * * The minimum set of functions is pushed to SRAM for execution: * - omap3_do_wfi for erratum i581 WA, - * - save_secure_ram_context for security extensions. */ void omap_push_sram_idle(void) { omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz); - - if (omap_type() != OMAP2_DEVICE_TYPE_GP) - _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, - save_secure_ram_context_sz); } static void __init pm_errata_configure(void) @@ -553,7 +548,7 @@ int __init omap3_pm_init(void) clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = - kmalloc(0x803F, GFP_KERNEL); + kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL); if (!omap3_secure_ram_storage) pr_err("Memory allocation failed when allocating for secure sram context\n"); --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_resto ENDPROC(enable_omap3630_toggle_l2_on_restore) /* - * Function to call rom code to save secure ram context. This gets - * relocated to SRAM, so it can be all in .data section. Otherwise - * we need to initialize api_params separately. + * Function to call rom code to save secure ram context. + * + * r0 = physical address of the parameters */ - .data - .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack - adr r3, api_params @ r3 points to parameters - str r0, [r3,#0x4] @ r0 has sdram address - ldr r12, high_mask - and r3, r3, r12 - ldr r12, sram_phy_addr_mask - orr r3, r3, r12 + mov r3, r0 @ physical address of parameters mov r0, #25 @ set service ID for PPA mov r12, r0 @ copy secure service ID in r12 mov r1, #0 @ set task id for ROM code in r1 @@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context) nop nop ldmfd sp!, {r4 - r11, pc} - .align -sram_phy_addr_mask: - .word SRAM_BASE_P -high_mask: - .word 0xffff -api_params: - .word 0x4, 0x0, 0x0, 0x1, 0x1 ENDPROC(save_secure_ram_context) -ENTRY(save_secure_ram_context_sz) - .word . - save_secure_ram_context - - .text /* * ====================== Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: logicpd-somlv: Fix wl127x pinmux" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: logicpd-somlv: Fix wl127x pinmux to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Adam Ford <aford173(a)gmail.com> Date: Tue, 31 Oct 2017 13:45:59 -0500 Subject: ARM: dts: logicpd-somlv: Fix wl127x pinmux From: Adam Ford <aford173(a)gmail.com> [ Upstream commit cd7594ac3281722cb8f10d6f6c7e4287747c7a9d ] The pin assignment for the wl127x interrupt was incorrect. I am not sure how this every worked. This also eliminates a conflict with the SMC911x ethernet driver and properly moves pinmuxes for the related gpio to omap3_pmx_wkup from omap3_pmx_core. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford <aford173(a)gmail.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -121,7 +121,7 @@ &mmc3 { interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins>; + pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; non-removable; @@ -132,8 +132,8 @@ wlcore: wlcore@2 { compatible = "ti,wl1273"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; @@ -157,8 +157,6 @@ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ >; @@ -228,6 +226,12 @@ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; + wl127x_gpio: pinmux_wl127x_gpio_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; &omap3_pmx_core2 { Patches currently in stable-queue which might be from aford173(a)gmail.com are queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Adam Ford <aford173(a)gmail.com> Date: Tue, 31 Oct 2017 13:42:13 -0500 Subject: ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet From: Adam Ford <aford173(a)gmail.com> [ Upstream commit 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 ] This patch fixes and issue where the NAND and GPMC based ethernet controller stopped working. This also updates the GPMC settings to be consistent with the Logic PD Torpedo development from the commit listed above. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Signed-off-by: Adam Ford <aford173(a)gmail.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 3 ++- arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -72,7 +72,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -37,7 +37,7 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { compatible = "ti,omap2-nand"; Patches currently in stable-queue which might be from aford173(a)gmail.com are queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 17 Nov 2017 08:56:58 -0800 Subject: ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit cf87634c8b24e24bf379b8c6807c8b0fb5f23567 ] There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4 for a while that happens after about 20 - 40 minutes on an idle system with some data feeding device being connected, like a USB GPS device or a cellular modem. This issue happens in cpuidle states C2 and C3 and does not happen if cpuidle is limited to C1 state only. The symptoms are that the whole system hangs and never wakes up from idle, and if a watchdog is configured the system reboots after a while. Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC interrupt controller directly as a parent instead of the WUGEN. We need to pass the interrupts through WUGEN to GIC to provide the wakeup events for the processor. Let's fix the issue by removing the gic interrupt-parent and use the default interrupt-parent wakeupgen instead. Note that omap5.dtsi had this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") but we somehow missed omap4 at that point. Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") Cc: Dave Gerlach <d-gerlach(a)ti.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Marc Zyngier <marc.zyngier(a)arm.com> Cc: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Reviewed-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap4.dtsi | 2 -- 1 file changed, 2 deletions(-) --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -861,14 +861,12 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: Fix elm interrupt compiler warning" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix elm interrupt compiler warning to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-elm-interrupt-compiler-warning.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Mon, 4 Dec 2017 08:27:17 -0800 Subject: ARM: dts: Fix elm interrupt compiler warning From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ] Looks like the interrupt property is missing the controller and level information causing: Warning (interrupts_property): interrupts size is (4), expected multiple of 12 in /ocp/elm@48078000 Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -354,7 +354,7 @@ elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; - interrupts = <4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "elm"; status = "disabled"; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: am437x-cm-t43: Correct the dmas property of spi0" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 1 Nov 2017 11:03:40 +0200 Subject: ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit ca41e244517d6d3f1600c229ff7ca615049c1e9c ] The DMA binding for eDMA needs 2 parameters, not 1. The second, missing parameter is the tptc to be used for the channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am437x-cm-t43.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -301,8 +301,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - dmas = <&edma 16 - &edma 17>; + dmas = <&edma 16 0 + &edma 17 0>; dma-names = "tx0", "rx0"; flash: w25q64cvzpig@0 { Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: am4372: Correct the interrupts_properties of McASP" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am4372: Correct the interrupts_properties of McASP to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 1 Nov 2017 11:03:31 +0200 Subject: ARM: dts: am4372: Correct the interrupts_properties of McASP From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ] Fixes the following warnings: arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@48038000 arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@4803C000 Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am4372.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -927,7 +927,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8 2>, @@ -941,7 +942,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10 2>, Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror