- Linux-stable-mirror - lists.linaro.org

Patch "ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Adam Ford <aford173(a)gmail.com> Date: Tue, 31 Oct 2017 13:42:13 -0500 Subject: ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet From: Adam Ford <aford173(a)gmail.com> [ Upstream commit 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 ] This patch fixes and issue where the NAND and GPMC based ethernet controller stopped working. This also updates the GPMC settings to be consistent with the Logic PD Torpedo development from the commit listed above. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Signed-off-by: Adam Ford <aford173(a)gmail.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 3 ++- arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -72,7 +72,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -37,7 +37,7 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { compatible = "ti,omap2-nand"; Patches currently in stable-queue which might be from aford173(a)gmail.com are queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 17 Nov 2017 08:56:58 -0800 Subject: ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit cf87634c8b24e24bf379b8c6807c8b0fb5f23567 ] There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4 for a while that happens after about 20 - 40 minutes on an idle system with some data feeding device being connected, like a USB GPS device or a cellular modem. This issue happens in cpuidle states C2 and C3 and does not happen if cpuidle is limited to C1 state only. The symptoms are that the whole system hangs and never wakes up from idle, and if a watchdog is configured the system reboots after a while. Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC interrupt controller directly as a parent instead of the WUGEN. We need to pass the interrupts through WUGEN to GIC to provide the wakeup events for the processor. Let's fix the issue by removing the gic interrupt-parent and use the default interrupt-parent wakeupgen instead. Note that omap5.dtsi had this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") but we somehow missed omap4 at that point. Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") Cc: Dave Gerlach <d-gerlach(a)ti.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Marc Zyngier <marc.zyngier(a)arm.com> Cc: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Reviewed-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap4.dtsi | 2 -- 1 file changed, 2 deletions(-) --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -861,14 +861,12 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: Fix elm interrupt compiler warning" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix elm interrupt compiler warning to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-elm-interrupt-compiler-warning.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Mon, 4 Dec 2017 08:27:17 -0800 Subject: ARM: dts: Fix elm interrupt compiler warning From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ] Looks like the interrupt property is missing the controller and level information causing: Warning (interrupts_property): interrupts size is (4), expected multiple of 12 in /ocp/elm@48078000 Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -354,7 +354,7 @@ elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; - interrupts = <4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "elm"; status = "disabled"; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: am437x-cm-t43: Correct the dmas property of spi0" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 1 Nov 2017 11:03:40 +0200 Subject: ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit ca41e244517d6d3f1600c229ff7ca615049c1e9c ] The DMA binding for eDMA needs 2 parameters, not 1. The second, missing parameter is the tptc to be used for the channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am437x-cm-t43.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -301,8 +301,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - dmas = <&edma 16 - &edma 17>; + dmas = <&edma 16 0 + &edma 17 0>; dma-names = "tx0", "rx0"; flash: w25q64cvzpig@0 { Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: am4372: Correct the interrupts_properties of McASP" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am4372: Correct the interrupts_properties of McASP to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 1 Nov 2017 11:03:31 +0200 Subject: ARM: dts: am4372: Correct the interrupts_properties of McASP From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ] Fixes the following warnings: arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@48038000 arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@4803C000 Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am4372.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -927,7 +927,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8 2>, @@ -941,7 +942,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10 2>, Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 4 months

1
0
0 0

Patch "ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Keerthy <j-keerthy(a)ti.com> Date: Fri, 10 Nov 2017 16:56:52 +0530 Subject: ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function From: Keerthy <j-keerthy(a)ti.com> [ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ] Referring TRM Am335X series: http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf The LastPowerStateEntered bitfield is present only for PM_CEFUSE domain. This is not present in any of the other power domains. Hence remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly reads the reserved bit fields for all the other power domains. Reading the reserved bits leads to wrongly interpreting the low power transitions for various power domains that do not have the LastPowerStateEntered field. The pm debug counters values are wrong currently as we are incrementing them based on the reserved bits. Signed-off-by: Keerthy <j-keerthy(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-omap2/prm33xx.c | 12 ------------ 1 file changed, 12 deletions(-) --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struc return v; } -static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LASTPOWERSTATEENTERED_MASK; - v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) { am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, @@ -357,7 +346,6 @@ struct pwrdm_ops am33xx_pwrdm_operations .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, Patches currently in stable-queue which might be from j-keerthy(a)ti.com are queue-4.14/gpio-davinci-assign-first-bank-regs-for-unbanked-case.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch

7 years, 4 months

1
0
0 0

Patch "509: fix printing uninitialized stack memory when OID is empty" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled 509: fix printing uninitialized stack memory when OID is empty to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: 509-fix-printing-uninitialized-stack-memory-when-oid-is-empty.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Eric Biggers <ebiggers3(a)gmail.com> Date: Fri, 8 Dec 2017 15:13:28 +0000 Subject: 509: fix printing uninitialized stack memory when OID is empty From: Eric Biggers <ebiggers3(a)gmail.com> [ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ] Callers of sprint_oid() do not check its return value before printing the result. In the case where the OID is zero-length, -EBADMSG was being returned without anything being written to the buffer, resulting in uninitialized stack memory being printed. Fix this by writing "(bad)" to the buffer in the cases where -EBADMSG is returned. Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings") Signed-off-by: Eric Biggers <ebiggers(a)google.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- lib/oid_registry.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/lib/oid_registry.c +++ b/lib/oid_registry.c @@ -116,7 +116,7 @@ int sprint_oid(const void *data, size_t int count; if (v >= end) - return -EBADMSG; + goto bad; n = *v++; ret = count = snprintf(buffer, bufsize, "%u.%u", n / 40, n % 40); @@ -134,7 +134,7 @@ int sprint_oid(const void *data, size_t num = n & 0x7f; do { if (v >= end) - return -EBADMSG; + goto bad; n = *v++; num <<= 7; num |= n & 0x7f; @@ -148,6 +148,10 @@ int sprint_oid(const void *data, size_t } return ret; + +bad: + snprintf(buffer, bufsize, "(bad)"); + return -EBADMSG; } EXPORT_SYMBOL_GPL(sprint_oid); Patches currently in stable-queue which might be from ebiggers3(a)gmail.com are queue-4.14/509-fix-printing-uninitialized-stack-memory-when-oid-is-empty.patch

7 years, 4 months

1
0
0 0

Patch "xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies." has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies. to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfrm-fix-stack-out-of-bounds-with-misconfigured-transport-mode-policies.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Steffen Klassert <steffen.klassert(a)secunet.com> Date: Fri, 8 Dec 2017 08:07:25 +0100 Subject: xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies. From: Steffen Klassert <steffen.klassert(a)secunet.com> [ Upstream commit 732706afe1cc46ef48493b3d2b69c98f36314ae4 ] On policies with a transport mode template, we pass the addresses from the flowi to xfrm_state_find(), assuming that the IP addresses (and address family) don't change during transformation. Unfortunately our policy template validation is not strict enough. It is possible to configure policies with transport mode template where the address family of the template does not match the selectors address family. This lead to stack-out-of-bound reads because we compare arddesses of the wrong family. Fix this by refusing such a configuration, address family can not change on transport mode. We use the assumption that, on transport mode, the first templates address family must match the address family of the policy selector. Subsequent transport mode templates must mach the address family of the previous template. Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/xfrm/xfrm_user.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1349,11 +1349,14 @@ static void copy_templates(struct xfrm_p static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family) { + u16 prev_family; int i; if (nr > XFRM_MAX_DEPTH) return -EINVAL; + prev_family = family; + for (i = 0; i < nr; i++) { /* We never validated the ut->family value, so many * applications simply leave it at zero. The check was @@ -1365,6 +1368,12 @@ static int validate_tmpl(int nr, struct if (!ut[i].family) ut[i].family = family; + if ((ut[i].mode == XFRM_MODE_TRANSPORT) && + (ut[i].family != prev_family)) + return -EINVAL; + + prev_family = ut[i].family; + switch (ut[i].family) { case AF_INET: break; Patches currently in stable-queue which might be from steffen.klassert(a)secunet.com are queue-3.18/xfrm-fix-stack-out-of-bounds-with-misconfigured-transport-mode-policies.patch queue-3.18/xfrm-check-id-proto-in-validate_tmpl.patch

7 years, 4 months

1
0
0 0

Patch "xen: XEN_ACPI_PROCESSOR is Dom0-only" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen: XEN_ACPI_PROCESSOR is Dom0-only to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-xen_acpi_processor-is-dom0-only.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Jan Beulich <JBeulich(a)suse.com> Date: Tue, 12 Dec 2017 03:18:11 -0700 Subject: xen: XEN_ACPI_PROCESSOR is Dom0-only From: Jan Beulich <JBeulich(a)suse.com> [ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ] Add a respective dependency. Signed-off-by: Jan Beulich <jbeulich(a)suse.com> Reviewed-by: Juergen Gross <jgross(a)suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/xen/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -222,7 +222,7 @@ config XEN_ACPI_HOTPLUG_CPU config XEN_ACPI_PROCESSOR tristate "Xen ACPI processor" - depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ + depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ default m help This ACPI processor uploads Power Management information to the Xen Patches currently in stable-queue which might be from JBeulich(a)suse.com are queue-3.18/xen-xen_acpi_processor-is-dom0-only.patch

7 years, 4 months

1
0
0 0

Patch "x86/mm/kmmio: Fix mmiotrace for page unaligned addresses" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/mm/kmmio: Fix mmiotrace for page unaligned addresses to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-mm-kmmio-fix-mmiotrace-for-page-unaligned-addresses.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Karol Herbst <kherbst(a)redhat.com> Date: Mon, 27 Nov 2017 08:51:39 +0100 Subject: x86/mm/kmmio: Fix mmiotrace for page unaligned addresses From: Karol Herbst <kherbst(a)redhat.com> [ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ] If something calls ioremap() with an address not aligned to PAGE_SIZE, the returned address might be not aligned as well. This led to a probe registered on exactly the returned address, but the entire page was armed for mmiotracing. On calling iounmap() the address passed to unregister_kmmio_probe() was PAGE_SIZE aligned by the caller leading to a complete freeze of the machine. We should always page align addresses while (un)registerung mappings, because the mmiotracer works on top of pages, not mappings. We still keep track of the probes based on their real addresses and lengths though, because the mmiotrace still needs to know what are mapped memory regions. Also move the call to mmiotrace_iounmap() prior page aligning the address, so that all probes are unregistered properly, otherwise the kernel ends up failing memory allocations randomly after disabling the mmiotracer. Tested-by: Lyude <lyude(a)redhat.com> Signed-off-by: Karol Herbst <kherbst(a)redhat.com> Acked-by: Pekka Paalanen <ppaalanen(a)gmail.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: nouveau(a)lists.freedesktop.org Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/mm/ioremap.c | 4 ++-- arch/x86/mm/kmmio.c | 12 +++++++----- 2 files changed, 9 insertions(+), 7 deletions(-) --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -296,11 +296,11 @@ void iounmap(volatile void __iomem *addr (void __force *)addr < phys_to_virt(ISA_END_ADDRESS)) return; + mmiotrace_iounmap(addr); + addr = (volatile void __iomem *) (PAGE_MASK & (unsigned long __force)addr); - mmiotrace_iounmap(addr); - /* Use the vm area unlocked, assuming the caller ensures there isn't another iounmap for the same address in parallel. Reuse of the virtual address is prevented by --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -434,17 +434,18 @@ int register_kmmio_probe(struct kmmio_pr unsigned long flags; int ret = 0; unsigned long size = 0; + unsigned long addr = p->addr & PAGE_MASK; const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); unsigned int l; pte_t *pte; spin_lock_irqsave(&kmmio_lock, flags); - if (get_kmmio_probe(p->addr)) { + if (get_kmmio_probe(addr)) { ret = -EEXIST; goto out; } - pte = lookup_address(p->addr, &l); + pte = lookup_address(addr, &l); if (!pte) { ret = -EINVAL; goto out; @@ -453,7 +454,7 @@ int register_kmmio_probe(struct kmmio_pr kmmio_count++; list_add_rcu(&p->list, &kmmio_probes); while (size < size_lim) { - if (add_kmmio_fault_page(p->addr + size)) + if (add_kmmio_fault_page(addr + size)) pr_err("Unable to set page fault.\n"); size += page_level_size(l); } @@ -527,19 +528,20 @@ void unregister_kmmio_probe(struct kmmio { unsigned long flags; unsigned long size = 0; + unsigned long addr = p->addr & PAGE_MASK; const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); struct kmmio_fault_page *release_list = NULL; struct kmmio_delayed_release *drelease; unsigned int l; pte_t *pte; - pte = lookup_address(p->addr, &l); + pte = lookup_address(addr, &l); if (!pte) return; spin_lock_irqsave(&kmmio_lock, flags); while (size < size_lim) { - release_kmmio_fault_page(p->addr + size, &release_list); + release_kmmio_fault_page(addr + size, &release_list); size += page_level_size(l); } list_del_rcu(&p->list); Patches currently in stable-queue which might be from kherbst(a)redhat.com are queue-3.18/x86-mm-kmmio-fix-mmiotrace-for-page-unaligned-addresses.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror