- Linux-stable-mirror - lists.linaro.org

Patch "arm: spear13xx: Fix spics gpio controller's warning" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm: spear13xx: Fix spics gpio controller's warning to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-spear13xx-fix-spics-gpio-controller-s-warning.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f8975cb1b8a36d0839b6365235778dd9df1d04ca Mon Sep 17 00:00:00 2001 From: Viresh Kumar <viresh.kumar(a)linaro.org> Date: Thu, 11 Jan 2018 11:28:53 +0530 Subject: arm: spear13xx: Fix spics gpio controller's warning From: Viresh Kumar <viresh.kumar(a)linaro.org> commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream. This fixes the following warning by also sending the flags argument for gpio controllers: Property 'cs-gpios', cell 6 is not a phandle reference in /ahb/apb/spi@e0100000 Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Cc: stable(a)vger.kernel.org # v3.8+ Reported-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Olof Johansson <olof(a)lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/spear1310-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -349,7 +349,7 @@ spi0: spi@e0100000 { status = "okay"; num-cs = <3>; - cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; + cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>; stmpe610@0 { compatible = "st,stmpe610"; Patches currently in stable-queue which might be from viresh.kumar(a)linaro.org are queue-4.15/arm-spear600-add-missing-interrupt-parent-of-rtc.patch queue-4.15/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch queue-4.15/cpufreq-powernv-dont-assume-distinct-pstate-values-for-nominal-and-pmin.patch queue-4.15/arm-spear13xx-fix-dmas-cells.patch

7 years, 4 months

1
0
0 0

Patch "arm: spear13xx: Fix dmas cells" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm: spear13xx: Fix dmas cells to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-spear13xx-fix-dmas-cells.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cdd10409914184c7eee5ae3e11beb890c9c16c61 Mon Sep 17 00:00:00 2001 From: Viresh Kumar <viresh.kumar(a)linaro.org> Date: Thu, 11 Jan 2018 11:28:52 +0530 Subject: arm: spear13xx: Fix dmas cells From: Viresh Kumar <viresh.kumar(a)linaro.org> commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream. The "dmas" cells for the designware DMA controller need to have only 3 properties apart from the phandle: request line, src master and destination master. But the commit 6e8887f60f60 updated it incorrectly while moving from platform code to DT. Fix it. Cc: stable(a)vger.kernel.org # v3.10+ Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT") Reported-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Olof Johansson <olof(a)lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/dma/snps-dma.txt | 2 +- arch/arm/boot/dts/spear1340.dtsi | 4 ++-- arch/arm/boot/dts/spear13xx.dtsi | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -64,6 +64,6 @@ Example: reg = <0xe0000000 0x1000>; interrupts = <0 35 0x4>; dmas = <&dmahost 12 0 1>, - <&dmahost 13 0 1 0>; + <&dmahost 13 1 0>; dma-names = "rx", "rx"; }; --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -142,8 +142,8 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; - dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */ - <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */ + dmas = <&dwdma0 12 0 1>, + <&dwdma0 13 1 0>; dma-names = "tx", "rx"; }; --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -100,7 +100,7 @@ reg = <0xb2800000 0x1000>; interrupts = <0 29 0x4>; status = "disabled"; - dmas = <&dwdma0 0 0 0 0>; + dmas = <&dwdma0 0 0 0>; dma-names = "data"; }; @@ -290,8 +290,8 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; - dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */ - <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */ + dmas = <&dwdma0 4 0 0>, + <&dwdma0 5 0 0>; dma-names = "tx", "rx"; }; Patches currently in stable-queue which might be from viresh.kumar(a)linaro.org are queue-4.15/arm-spear600-add-missing-interrupt-parent-of-rtc.patch queue-4.15/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch queue-4.15/cpufreq-powernv-dont-assume-distinct-pstate-values-for-nominal-and-pmin.patch queue-4.15/arm-spear13xx-fix-dmas-cells.patch

7 years, 4 months

1
0
0 0

Patch "ARM: lpc3250: fix uda1380 gpio numbers" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: lpc3250: fix uda1380 gpio numbers to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-lpc3250-fix-uda1380-gpio-numbers.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ca32e0c4bf9ca4b87089c5a5ce945e5f2ec890da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd(a)arndb.de> Date: Wed, 10 Jan 2018 17:22:00 +0100 Subject: ARM: lpc3250: fix uda1380 gpio numbers From: Arnd Bergmann <arnd(a)arndb.de> commit ca32e0c4bf9ca4b87089c5a5ce945e5f2ec890da upstream. dtc warns about obviously incorrect GPIO numbers for the audio codec on both lpc32xx boards: arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 It looks like the nodes are written for a different binding that combines the GPIO number into a single number rather than a bank/number pair. I found the right numbers on stackexchange.com, so this patch fixes the warning and has a reasonable chance of getting things to actually work. Cc: stable(a)vger.kernel.org Link: https://unix.stackexchange.com/questions/59497/alsa-asoc-how-to-correctly-l… Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/lpc3250-ea3250.dts | 4 ++-- arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -156,8 +156,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; }; --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -81,8 +81,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; }; Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.15/arm-spear600-add-missing-interrupt-parent-of-rtc.patch queue-4.15/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch queue-4.15/kselftest-fix-oom-in-memory-compaction-test.patch queue-4.15/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch queue-4.15/arm-lpc3250-fix-uda1380-gpio-numbers.patch queue-4.15/arm-spear13xx-fix-dmas-cells.patch queue-4.15/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: STi: Add gpio polarity for "hdmi, hpd-gpio" property" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7ac1f59c09a61e6af6622df6809e003b0af07f3d Mon Sep 17 00:00:00 2001 From: Patrice Chotard <patrice.chotard(a)st.com> Date: Wed, 10 Jan 2018 09:21:02 +0100 Subject: ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property From: Patrice Chotard <patrice.chotard(a)st.com> commit 7ac1f59c09a61e6af6622df6809e003b0af07f3d upstream. The GPIO polarity is missing in the hdmi,hpd-gpio property, this fixes the following DT warnings: arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 [arnd: marked Cc:stable since this warning shows up with the latest dtc by default, and is more likely to actually cause problems than the other patches from this series] Cc: stable(a)vger.kernel.org Signed-off-by: Patrice Chotard <patrice.chotard(a)st.com> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/stih407.dtsi | 3 ++- arch/arm/boot/dts/stih410.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -8,6 +8,7 @@ */ #include "stih407-clock.dtsi" #include "stih407-family.dtsi" +#include <dt-bindings/gpio/gpio.h> / { soc { sti-display-subsystem { @@ -122,7 +123,7 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - hdmi,hpd-gpio = <&pio5 3>; + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; reset-names = "hdmi"; resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; ddc = <&hdmiddc>; --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -9,6 +9,7 @@ #include "stih410-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> / { aliases { bdisp0 = &bdisp0; @@ -213,7 +214,7 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - hdmi,hpd-gpio = <&pio5 3>; + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; reset-names = "hdmi"; resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; ddc = <&hdmiddc>; Patches currently in stable-queue which might be from patrice.chotard(a)st.com are queue-4.15/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: nomadik: add interrupt-parent for clcd" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: nomadik: add interrupt-parent for clcd to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-nomadik-add-interrupt-parent-for-clcd.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e8bfa0422469cdfc86be3f525f621b1d44d2481b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd(a)arndb.de> Date: Mon, 15 Jan 2018 17:37:08 +0100 Subject: ARM: dts: nomadik: add interrupt-parent for clcd From: Arnd Bergmann <arnd(a)arndb.de> commit e8bfa0422469cdfc86be3f525f621b1d44d2481b upstream. The clcd device is lacking an interrupt-parent property, which makes the interrupt unusable and shows up as a warning with the latest dtc version: arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000 arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000 I looked up the old board files and found that this interrupt has the same irqchip as all the other on-chip device, it just needs one extra line. Fixes: 17470b7da11c ("ARM: dts: add the CLCD LCD display to the NHK15") Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Cc: stable(a)vger.kernel.org Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -750,6 +750,7 @@ reg = <0x10120000 0x1000>; interrupt-names = "combined"; interrupts = <14>; + interrupt-parent = <&vica>; clocks = <&clcdclk>, <&hclkclcd>; clock-names = "clcdclk", "apb_pclk"; status = "disabled"; Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.15/arm-spear600-add-missing-interrupt-parent-of-rtc.patch queue-4.15/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch queue-4.15/kselftest-fix-oom-in-memory-compaction-test.patch queue-4.15/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch queue-4.15/arm-lpc3250-fix-uda1380-gpio-numbers.patch queue-4.15/arm-spear13xx-fix-dmas-cells.patch queue-4.15/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch

7 years, 4 months

1
0
0 0

Patch "arm: dts: mt7623: fix card detection issue on bananapi-r2" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm: dts: mt7623: fix card detection issue on bananapi-r2 to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-mt7623-fix-card-detection-issue-on-bananapi-r2.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b96a696fb2a8dd1ee4e6cfee48dcac270fc53287 Mon Sep 17 00:00:00 2001 From: Sean Wang <sean.wang(a)mediatek.com> Date: Thu, 7 Dec 2017 14:43:24 +0800 Subject: arm: dts: mt7623: fix card detection issue on bananapi-r2 From: Sean Wang <sean.wang(a)mediatek.com> commit b96a696fb2a8dd1ee4e6cfee48dcac270fc53287 upstream. Fix that bananapi-r2 booting from SD-card would fail since incorrect polarity is applied to the previous setup with GPIO_ACTIVE_HIGH. Cc: stable(a)vger.kernel.org Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2") Signed-off-by: Sean Wang <sean.wang(a)mediatek.com> Tested-by: Matthias Brugger <matthias.bgg(a)gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -204,7 +204,7 @@ bus-width = <4>; max-frequency = <50000000>; cap-sd-highspeed; - cd-gpios = <&pio 261 0>; + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; vmmc-supply = <&mt6323_vmch_reg>; vqmmc-supply = <&mt6323_vio18_reg>; }; Patches currently in stable-queue which might be from sean.wang(a)mediatek.com are queue-4.15/arm-dts-mt7623-fix-card-detection-issue-on-bananapi-r2.patch

7 years, 4 months

1
0
0 0

Patch "x86/xen: init %gs very early to avoid page faults with stack protector" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/xen: init %gs very early to avoid page faults with stack protector to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-xen-init-gs-very-early-to-avoid-page-faults-with-stack-protector.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4f277295e54c5b7340e48efea3fc5cc21a2872b7 Mon Sep 17 00:00:00 2001 From: Juergen Gross <jgross(a)suse.com> Date: Thu, 1 Feb 2018 13:40:19 +0100 Subject: x86/xen: init %gs very early to avoid page faults with stack protector From: Juergen Gross <jgross(a)suse.com> commit 4f277295e54c5b7340e48efea3fc5cc21a2872b7 upstream. When running as Xen pv guest %gs is initialized some time after C code is started. Depending on stack protector usage this might be too late, resulting in page faults. So setup %gs and MSR_GS_BASE in assembly code already. Cc: stable(a)vger.kernel.org Signed-off-by: Juergen Gross <jgross(a)suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Tested-by: Chris Patterson <cjp256(a)gmail.com> Signed-off-by: Juergen Gross <jgross(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/xen/xen-head.S | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -9,7 +9,9 @@ #include <asm/boot.h> #include <asm/asm.h> +#include <asm/msr.h> #include <asm/page_types.h> +#include <asm/percpu.h> #include <asm/unwind_hints.h> #include <xen/interface/elfnote.h> @@ -35,6 +37,20 @@ ENTRY(startup_xen) mov %_ASM_SI, xen_start_info mov $init_thread_union+THREAD_SIZE, %_ASM_SP +#ifdef CONFIG_X86_64 + /* Set up %gs. + * + * The base of %gs always points to the bottom of the irqstack + * union. If the stack protector canary is enabled, it is + * located at %gs:40. Note that, on SMP, the boot cpu uses + * init data section till per cpu areas are set up. + */ + movl $MSR_GS_BASE,%ecx + movq $INIT_PER_CPU_VAR(irq_stack_union),%rax + cdq + wrmsr +#endif + jmp xen_start_kernel END(startup_xen) __FINIT Patches currently in stable-queue which might be from jgross(a)suse.com are queue-4.14/x86-xen-init-gs-very-early-to-avoid-page-faults-with-stack-protector.patch

7 years, 4 months

1
0
0 0

Patch "x86/kexec: Make kexec (mostly) work in 5-level paging mode" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/kexec: Make kexec (mostly) work in 5-level paging mode to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-kexec-make-kexec-mostly-work-in-5-level-paging-mode.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5bf30316991d5bcda046343ee77d823cf16fdd03 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" <kirill.shutemov(a)linux.intel.com> Date: Mon, 29 Jan 2018 14:08:45 +0300 Subject: x86/kexec: Make kexec (mostly) work in 5-level paging mode From: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> commit 5bf30316991d5bcda046343ee77d823cf16fdd03 upstream. Currently kexec() will crash when switching into a 5-level paging enabled kernel. I missed that we need to change relocate_kernel() to set CR4.LA57 flag if the kernel has 5-level paging enabled. I avoided using #ifdef CONFIG_X86_5LEVEL here and inferred if we need to enable 5-level paging from previous CR4 value. This way the code is ready for boot-time switching between paging modes. With this patch applied, in addition to kexec 4-to-4 which always worked, we can kexec 4-to-5 and 5-to-5 - while 5-to-4 will need more work. Reported-by: Baoquan He <bhe(a)redhat.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Tested-by: Baoquan He <bhe(a)redhat.com> Cc: <stable(a)vger.kernel.org> # v4.14+ Cc: Borislav Petkov <bp(a)suse.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: linux-mm(a)kvack.org Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Link: http://lkml.kernel.org/r/20180129110845.26633-1-kirill.shutemov@linux.intel… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/relocate_kernel_64.S | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -68,6 +68,9 @@ relocate_kernel: movq %cr4, %rax movq %rax, CR4(%r11) + /* Save CR4. Required to enable the right paging mode later. */ + movq %rax, %r13 + /* zero out flags, and disable interrupts */ pushq $0 popfq @@ -126,8 +129,13 @@ identity_mapped: /* * Set cr4 to a known state: * - physical address extension enabled + * - 5-level paging, if it was enabled before */ movl $X86_CR4_PAE, %eax + testq $X86_CR4_LA57, %r13 + jz 1f + orl $X86_CR4_LA57, %eax +1: movq %rax, %cr4 jmp 1f Patches currently in stable-queue which might be from kirill.shutemov(a)linux.intel.com are queue-4.14/x86-kexec-make-kexec-mostly-work-in-5-level-paging-mode.patch

7 years, 4 months

1
0
0 0

Patch "x86/gpu: add CFL to early quirks" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/gpu: add CFL to early quirks to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-gpu-add-cfl-to-early-quirks.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 33aa69ed8aacd92dea12671e52eb3ca6ac2d7a49 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi <lucas.demarchi(a)intel.com> Date: Wed, 13 Dec 2017 12:04:25 -0800 Subject: x86/gpu: add CFL to early quirks From: Lucas De Marchi <lucas.demarchi(a)intel.com> commit 33aa69ed8aacd92dea12671e52eb3ca6ac2d7a49 upstream. CFL was missing from intel_early_ids[]. The PCI ID needs to be there to allow the memory region to be stolen, otherwise we could have RAM being arbitrarily overwritten if for example we keep using the UEFI framebuffer, depending on how BIOS has set up the e820 map. Fixes: b056f8f3d6b9 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.") Signed-off-by: Lucas De Marchi <lucas.demarchi(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: Anusha Srivatsa <anusha.srivatsa(a)intel.com> Cc: Jani Nikula <jani.nikula(a)linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Cc: David Airlie <airlied(a)linux.ie> Cc: intel-gfx(a)lists.freedesktop.org Cc: dri-devel(a)lists.freedesktop.org Cc: Ingo Molnar <mingo(a)kernel.org> Cc: H. Peter Anvin <hpa(a)zytor.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: x86(a)kernel.org Cc: <stable(a)vger.kernel.org> # v4.13+ 0890540e21cf drm/i915: add GT number to intel_device_info Cc: <stable(a)vger.kernel.org> # v4.13+ 41693fd52373 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5 Cc: <stable(a)vger.kernel.org> # v4.13+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Acked-by: Jani Nikula <jani.nikula(a)intel.com> Acked-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171213200425.2954-1-lucas.d… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/early-quirks.c | 1 + include/drm/i915_pciids.h | 6 ++++++ 2 files changed, 7 insertions(+) --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -527,6 +527,7 @@ static const struct pci_device_id intel_ INTEL_SKL_IDS(&gen9_early_ops), INTEL_BXT_IDS(&gen9_early_ops), INTEL_KBL_IDS(&gen9_early_ops), + INTEL_CFL_IDS(&gen9_early_ops), INTEL_GLK_IDS(&gen9_early_ops), INTEL_CNL_IDS(&gen9_early_ops), }; --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -354,6 +354,12 @@ INTEL_VGA_DEVICE(0x3EA8, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x3EA5, info) /* ULT GT3 */ +#define INTEL_CFL_IDS(info) \ + INTEL_CFL_S_GT1_IDS(info), \ + INTEL_CFL_S_GT2_IDS(info), \ + INTEL_CFL_H_GT2_IDS(info), \ + INTEL_CFL_U_GT3_IDS(info) + /* CNL U 2+2 */ #define INTEL_CNL_U_GT2_IDS(info) \ INTEL_VGA_DEVICE(0x5A52, info), \ Patches currently in stable-queue which might be from lucas.demarchi(a)intel.com are queue-4.14/x86-gpu-add-cfl-to-early-quirks.patch

7 years, 4 months

1
0
0 0

Patch "swiotlb: suppress warning when __GFP_NOWARN is set" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled swiotlb: suppress warning when __GFP_NOWARN is set to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: swiotlb-suppress-warning-when-__gfp_nowarn-is-set.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d0bc0c2a31c95002d37c3cc511ffdcab851b3256 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= <ckoenig.leichtzumerken(a)gmail.com> Date: Thu, 4 Jan 2018 14:24:19 +0100 Subject: swiotlb: suppress warning when __GFP_NOWARN is set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Christian König <ckoenig.leichtzumerken(a)gmail.com> commit d0bc0c2a31c95002d37c3cc511ffdcab851b3256 upstream. TTM tries to allocate coherent memory in chunks of 2MB first to improve TLB efficiency and falls back to allocating 4K pages if that fails. Suppress the warning when the 2MB allocations fails since there is a valid fall back path. Signed-off-by: Christian König <christian.koenig(a)amd.com> Reported-by: Mike Galbraith <efault(a)gmx.de> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104082 Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- lib/swiotlb.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -585,7 +585,7 @@ phys_addr_t swiotlb_tbl_map_single(struc not_found: spin_unlock_irqrestore(&io_tlb_lock, flags); - if (printk_ratelimit()) + if (!(attrs & DMA_ATTR_NO_WARN) && printk_ratelimit()) dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes)\n", size); return SWIOTLB_MAP_ERROR; found: @@ -712,6 +712,7 @@ void * swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flags) { + bool warn = !(flags & __GFP_NOWARN); dma_addr_t dev_addr; void *ret; int order = get_order(size); @@ -737,8 +738,8 @@ swiotlb_alloc_coherent(struct device *hw * GFP_DMA memory; fall back on map_single(), which * will grab memory from the lowest available address range. */ - phys_addr_t paddr = map_single(hwdev, 0, size, - DMA_FROM_DEVICE, 0); + phys_addr_t paddr = map_single(hwdev, 0, size, DMA_FROM_DEVICE, + warn ? 0 : DMA_ATTR_NO_WARN); if (paddr == SWIOTLB_MAP_ERROR) goto err_warn; @@ -768,9 +769,11 @@ swiotlb_alloc_coherent(struct device *hw return ret; err_warn: - pr_warn("swiotlb: coherent allocation failed for device %s size=%zu\n", - dev_name(hwdev), size); - dump_stack(); + if (warn && printk_ratelimit()) { + pr_warn("swiotlb: coherent allocation failed for device %s size=%zu\n", + dev_name(hwdev), size); + dump_stack(); + } return NULL; } Patches currently in stable-queue which might be from ckoenig.leichtzumerken(a)gmail.com are queue-4.14/dma-buf-fix-reservation_object_wait_timeout_rcu-once-more-v2.patch queue-4.14/swiotlb-suppress-warning-when-__gfp_nowarn-is-set.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror