- Linux-stable-mirror - lists.linaro.org

Patch "sparc64: ldc abort during vds iso boot" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sparc64: ldc abort during vds iso boot to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sparc64-ldc-abort-during-vds-iso-boot.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jag Raman <jag.raman(a)oracle.com> Date: Fri, 9 Jun 2017 12:29:31 -0400 Subject: sparc64: ldc abort during vds iso boot From: Jag Raman <jag.raman(a)oracle.com> [ Upstream commit 6c95483b768c62f8ee933ae08a1bdbcb78b5410f ] Orabug: 20902628 When an ldc control-only packet is received during data exchange in read_nonraw(), a new rx head is calculated but the rx queue head is not actually advanced (rx_set_head() is not called) and a branch is taken to 'no_data' at which point two things can happen depending on the value of the newly calculated rx head and the current rx tail: - If the rx queue is determined to be not empty, then the wrong packet is picked up. - If the rx queue is determined to be empty, then a read error (EAGAIN) is eventually returned since it is falsely assumed that more data was expected. The fix is to update the rx head and return in case of a control only packet during data exchange. Signed-off-by: Jagannathan Raman <jag.raman(a)oracle.com> Reviewed-by: Aaron Young <aaron.young(a)oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre(a)oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh(a)oracle.com> Reviewed-by: Liam Merwick <liam.merwick(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sparc/kernel/ldc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1733,9 +1733,14 @@ static int read_nonraw(struct ldc_channe lp->rcv_nxt = p->seqid; + /* + * If this is a control-only packet, there is nothing + * else to do but advance the rx queue since the packet + * was already processed above. + */ if (!(p->type & LDC_DATA)) { new = rx_advance(lp, new); - goto no_data; + break; } if (p->stype & (LDC_ACK | LDC_NACK)) { err = data_ack_nack(lp, p); Patches currently in stable-queue which might be from jag.raman(a)oracle.com are queue-4.9/sparc64-ldc-abort-during-vds-iso-boot.patch

7 years, 8 months

1
0
0 0

Patch "skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Date: Sun, 4 Jun 2017 04:16:22 +0200 Subject: skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 48a1df65334b74bd7531f932cca5928932abf769 ] This is a defense-in-depth measure in response to bugs like 4d6fa57b4dab ("macsec: avoid heap overflow in skb_to_sgvec"). There's not only a potential overflow of sglist items, but also a stack overflow potential, so we fix this by limiting the amount of recursion this function is allowed to do. Not actually providing a bounded base case is a future disaster that we can easily avoid here. As a small matter of house keeping, we take this opportunity to move the documentation comment over the actual function the documentation is for. While this could be implemented by using an explicit stack of skbuffs, when implementing this, the function complexity increased considerably, and I don't think such complexity and bloat is actually worth it. So, instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS, and measured the stack usage there. I also reverted the recent MIPS changes that give it a separate IRQ stack, so that I could experience some worst-case situations. I found that limiting it to 24 layers deep yielded a good stack usage with room for safety, as well as being much deeper than any driver actually ever creates. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Cc: Steffen Klassert <steffen.klassert(a)secunet.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: David Howells <dhowells(a)redhat.com> Cc: Sabrina Dubroca <sd(a)queasysnail.net> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/skbuff.h | 8 +++--- net/core/skbuff.c | 65 +++++++++++++++++++++++++++++++------------------ 2 files changed, 46 insertions(+), 27 deletions(-) --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -984,10 +984,10 @@ struct sk_buff *skb_realloc_headroom(str unsigned int headroom); struct sk_buff *skb_copy_expand(const struct sk_buff *skb, int newheadroom, int newtailroom, gfp_t priority); -int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, - int offset, int len); -int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, - int len); +int __must_check skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, + int offset, int len); +int __must_check skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, + int offset, int len); int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer); int skb_pad(struct sk_buff *skb, int pad); #define dev_kfree_skb(a) consume_skb(a) --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3475,24 +3475,18 @@ void __init skb_init(void) NULL); } -/** - * skb_to_sgvec - Fill a scatter-gather list from a socket buffer - * @skb: Socket buffer containing the buffers to be mapped - * @sg: The scatter-gather list to map into - * @offset: The offset into the buffer's contents to start mapping - * @len: Length of buffer space to be mapped - * - * Fill the specified scatter-gather list with mappings/pointers into a - * region of the buffer space attached to a socket buffer. - */ static int -__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len, + unsigned int recursion_level) { int start = skb_headlen(skb); int i, copy = start - offset; struct sk_buff *frag_iter; int elt = 0; + if (unlikely(recursion_level >= 24)) + return -EMSGSIZE; + if (copy > 0) { if (copy > len) copy = len; @@ -3511,6 +3505,8 @@ __skb_to_sgvec(struct sk_buff *skb, stru end = start + skb_frag_size(&skb_shinfo(skb)->frags[i]); if ((copy = end - offset) > 0) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + if (unlikely(elt && sg_is_last(&sg[elt - 1]))) + return -EMSGSIZE; if (copy > len) copy = len; @@ -3525,16 +3521,22 @@ __skb_to_sgvec(struct sk_buff *skb, stru } skb_walk_frags(skb, frag_iter) { - int end; + int end, ret; WARN_ON(start > offset + len); end = start + frag_iter->len; if ((copy = end - offset) > 0) { + if (unlikely(elt && sg_is_last(&sg[elt - 1]))) + return -EMSGSIZE; + if (copy > len) copy = len; - elt += __skb_to_sgvec(frag_iter, sg+elt, offset - start, - copy); + ret = __skb_to_sgvec(frag_iter, sg+elt, offset - start, + copy, recursion_level + 1); + if (unlikely(ret < 0)) + return ret; + elt += ret; if ((len -= copy) == 0) return elt; offset += copy; @@ -3545,6 +3547,31 @@ __skb_to_sgvec(struct sk_buff *skb, stru return elt; } +/** + * skb_to_sgvec - Fill a scatter-gather list from a socket buffer + * @skb: Socket buffer containing the buffers to be mapped + * @sg: The scatter-gather list to map into + * @offset: The offset into the buffer's contents to start mapping + * @len: Length of buffer space to be mapped + * + * Fill the specified scatter-gather list with mappings/pointers into a + * region of the buffer space attached to a socket buffer. Returns either + * the number of scatterlist items used, or -EMSGSIZE if the contents + * could not fit. + */ +int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +{ + int nsg = __skb_to_sgvec(skb, sg, offset, len, 0); + + if (nsg <= 0) + return nsg; + + sg_mark_end(&sg[nsg - 1]); + + return nsg; +} +EXPORT_SYMBOL_GPL(skb_to_sgvec); + /* As compared with skb_to_sgvec, skb_to_sgvec_nomark only map skb to given * sglist without mark the sg which contain last skb data as the end. * So the caller can mannipulate sg list as will when padding new data after @@ -3567,19 +3594,11 @@ __skb_to_sgvec(struct sk_buff *skb, stru int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) { - return __skb_to_sgvec(skb, sg, offset, len); + return __skb_to_sgvec(skb, sg, offset, len, 0); } EXPORT_SYMBOL_GPL(skb_to_sgvec_nomark); -int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) -{ - int nsg = __skb_to_sgvec(skb, sg, offset, len); - sg_mark_end(&sg[nsg - 1]); - - return nsg; -} -EXPORT_SYMBOL_GPL(skb_to_sgvec); /** * skb_cow_data - Check that a socket buffer's data buffers are writable Patches currently in stable-queue which might be from Jason(a)zx2c4.com are queue-4.9/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-4.9/macsec-check-return-value-of-skb_to_sgvec-always.patch

7 years, 8 months

1
0
0 0

Patch "SMB2: Fix share type handling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled SMB2: Fix share type handling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: smb2-fix-share-type-handling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Fri, 12 May 2017 17:59:32 +0200 Subject: SMB2: Fix share type handling From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 ] In fs/cifs/smb2pdu.h, we have: #define SMB2_SHARE_TYPE_DISK 0x01 #define SMB2_SHARE_TYPE_PIPE 0x02 #define SMB2_SHARE_TYPE_PRINT 0x03 Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can never trigger and printer share would be interpreted as disk share. So, test the ShareType value for equality instead. Fixes: faaf946a7d5b ("CIFS: Add tree connect/disconnect capability for SMB2") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Acked-by: Aurelien Aptel <aaptel(a)suse.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/smb2pdu.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1151,15 +1151,19 @@ SMB2_tcon(const unsigned int xid, struct goto tcon_exit; } - if (rsp->ShareType & SMB2_SHARE_TYPE_DISK) + switch (rsp->ShareType) { + case SMB2_SHARE_TYPE_DISK: cifs_dbg(FYI, "connection to disk share\n"); - else if (rsp->ShareType & SMB2_SHARE_TYPE_PIPE) { + break; + case SMB2_SHARE_TYPE_PIPE: tcon->ipc = true; cifs_dbg(FYI, "connection to pipe share\n"); - } else if (rsp->ShareType & SMB2_SHARE_TYPE_PRINT) { - tcon->print = true; + break; + case SMB2_SHARE_TYPE_PRINT: + tcon->ipc = true; cifs_dbg(FYI, "connection to printer\n"); - } else { + break; + default: cifs_dbg(VFS, "unknown share type %d\n", rsp->ShareType); rc = -EOPNOTSUPP; goto tcon_error_exit; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.9/cpuidle-dt-add-missing-of_node_put.patch queue-4.9/drm-vc4-fix-resource-leak-in-vc4_get_hang_state_ioctl-in-error-handling-path.patch queue-4.9/edac-mv64x60-fix-an-error-handling-path.patch queue-4.9/smb2-fix-share-type-handling.patch queue-4.9/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch

7 years, 8 months

1
0
0 0

Patch "skbuff: only inherit relevant tx_flags" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled skbuff: only inherit relevant tx_flags to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: skbuff-only-inherit-relevant-tx_flags.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Willem de Bruijn <willemb(a)google.com> Date: Thu, 8 Jun 2017 11:35:03 -0400 Subject: skbuff: only inherit relevant tx_flags From: Willem de Bruijn <willemb(a)google.com> [ Upstream commit fff88030b3ff930ca7a3d74acfee0472f33887ea ] When inheriting tx_flags from one skbuff to another, always apply a mask to avoid overwriting unrelated other bits in the field. The two SKBTX_SHARED_FRAG cases clears all other bits. In practice, tx_flags are zero at this point now. But this is fragile. Timestamp flags are set, for instance, if in tcp_gso_segment, after this clear in skb_segment. The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG. Signed-off-by: Willem de Bruijn <willemb(a)google.com> Acked-by: Soheil Hassas Yeganeh <soheil(a)google.com> Acked-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/skbuff.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2615,7 +2615,8 @@ void skb_split(struct sk_buff *skb, stru { int pos = skb_headlen(skb); - skb_shinfo(skb1)->tx_flags = skb_shinfo(skb)->tx_flags & SKBTX_SHARED_FRAG; + skb_shinfo(skb1)->tx_flags |= skb_shinfo(skb)->tx_flags & + SKBTX_SHARED_FRAG; if (len < pos) /* Split line is inside header. */ skb_split_inside_header(skb, skb1, len, pos); else /* Second chunk has no header, nothing to copy. */ @@ -3228,8 +3229,8 @@ normal: skb_copy_from_linear_data_offset(head_skb, offset, skb_put(nskb, hsize), hsize); - skb_shinfo(nskb)->tx_flags = skb_shinfo(head_skb)->tx_flags & - SKBTX_SHARED_FRAG; + skb_shinfo(nskb)->tx_flags |= skb_shinfo(head_skb)->tx_flags & + SKBTX_SHARED_FRAG; while (pos < offset + len) { if (i >= nfrags) { @@ -3881,7 +3882,8 @@ void __skb_tstamp_tx(struct sk_buff *ori return; if (tsonly) { - skb_shinfo(skb)->tx_flags = skb_shinfo(orig_skb)->tx_flags; + skb_shinfo(skb)->tx_flags |= skb_shinfo(orig_skb)->tx_flags & + SKBTX_ANY_TSTAMP; skb_shinfo(skb)->tskey = skb_shinfo(orig_skb)->tskey; } Patches currently in stable-queue which might be from willemb(a)google.com are queue-4.9/skbuff-only-inherit-relevant-tx_flags.patch

7 years, 8 months

1
0
0 0

Patch "sit: reload iphdr in ipip6_rcv" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sit: reload iphdr in ipip6_rcv to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sit-reload-iphdr-in-ipip6_rcv.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Date: Sun, 4 Jun 2017 14:43:43 +0800 Subject: sit: reload iphdr in ipip6_rcv From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> [ Upstream commit b699d0035836f6712917a41e7ae58d84359b8ff9 ] Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/sit.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -657,6 +657,7 @@ static int ipip6_rcv(struct sk_buff *skb if (iptunnel_pull_header(skb, 0, htons(ETH_P_IPV6), !net_eq(tunnel->net, dev_net(tunnel->dev)))) goto out; + iph = ip_hdr(skb); err = IP_ECN_decapsulate(iph, skb); if (unlikely(err)) { Patches currently in stable-queue which might be from yanhaishuang(a)cmss.chinamobile.com are queue-4.9/sit-reload-iphdr-in-ipip6_rcv.patch

7 years, 8 months

1
0
0 0

Patch "signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Sat, 19 Aug 2017 15:26:01 -0500 Subject: signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit cf4674c46c66e45f238f8f7e81af2a444b970c0a ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return SIL_FAULT and the appropriate fields will be reliably copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: Paul Mackerras <paulus(a)samba.org> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: linuxppc-dev(a)lists.ozlabs.org Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx") Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++++++++++++ arch/powerpc/kernel/traps.c | 10 +++++----- 2 files changed, 20 insertions(+), 5 deletions(-) --- a/arch/powerpc/include/uapi/asm/siginfo.h +++ b/arch/powerpc/include/uapi/asm/siginfo.h @@ -17,4 +17,19 @@ #undef NSIGTRAP #define NSIGTRAP 4 +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGTRAP si_codes + */ +#ifdef __KERNEL__ +#define TRAP_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + + #endif /* _ASM_POWERPC_SIGINFO_H */ --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -793,7 +793,7 @@ void unknown_exception(struct pt_regs *r printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); exception_exit(prev_state); } @@ -815,7 +815,7 @@ bail: void RunModeException(struct pt_regs *regs) { - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); } void single_step_exception(struct pt_regs *regs) @@ -851,7 +851,7 @@ static void emulate_single_step(struct p static inline int __parse_fpscr(unsigned long fpscr) { - int ret = 0; + int ret = FPE_FIXME; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) @@ -1855,7 +1855,7 @@ void SPEFloatingPointException(struct pt extern int do_spe_mathemu(struct pt_regs *regs); unsigned long spefscr; int fpexc_mode; - int code = 0; + int code = FPE_FIXME; int err; flush_spe_to_thread(current); @@ -1924,7 +1924,7 @@ void SPEFloatingPointRoundException(stru printk(KERN_ERR "unrecognized spe instruction " "in %s at %lx\n", current->comm, regs->nip); } else { - _exception(SIGFPE, regs, 0, regs->nip); + _exception(SIGFPE, regs, FPE_FIXME, regs->nip); return; } } Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 8 months

1
0
0 0

Patch "signal/metag: Document a conflict with SI_USER with SIGFPE" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/metag: Document a conflict with SI_USER with SIGFPE to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Tue, 1 Aug 2017 10:37:40 -0500 Subject: signal/metag: Document a conflict with SI_USER with SIGFPE From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit b80328be53c215346b153769267b38f531d89b4f ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result hat uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the appropriate fields will reliably be copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: James Hogan <james.hogan(a)imgtec.com> Cc: linux-metag(a)vger.kernel.org Ref: ac919f0883e5 ("metag: Traps") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/metag/include/uapi/asm/siginfo.h | 7 +++++++ arch/metag/kernel/traps.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) --- a/arch/metag/include/uapi/asm/siginfo.h +++ b/arch/metag/include/uapi/asm/siginfo.h @@ -5,4 +5,11 @@ #include <asm-generic/siginfo.h> +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + #endif --- a/arch/metag/kernel/traps.c +++ b/arch/metag/kernel/traps.c @@ -732,7 +732,7 @@ TBIRES fpe_handler(TBIRES State, int Sig else if (error_state & TXSTAT_FPE_INEXACT_BIT) info.si_code = FPE_FLTRES; else - info.si_code = 0; + info.si_code = FPE_FIXME; info.si_errno = 0; info.si_addr = (__force void __user *)regs->ctx.CurrPC; force_sig_info(SIGFPE, &info, current); Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 8 months

1
0
0 0

Patch "serial: sh-sci: Fix race condition causing garbage during shutdown" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix race condition causing garbage during shutdown to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Tue, 25 Apr 2017 20:15:35 +0200 Subject: serial: sh-sci: Fix race condition causing garbage during shutdown From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 1cf4a7efdc71cab84c42cfea7200608711ea954f ] If DMA is enabled and used, a burst of old data may be seen on the serial console during "poweroff" or "reboot". uart_flush_buffer() clears the circular buffer, but sci_port.tx_dma_len is not reset. This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE - sci_port.tx_dma_len) bytes. To fix this, add a .flush_buffer() callback that resets sci_port.tx_dma_len. Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race condition (TX+DMA)"). Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sh-sci.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1545,7 +1545,16 @@ static void sci_free_dma(struct uart_por if (s->chan_rx) sci_rx_dma_release(s, false); } -#else + +static void sci_flush_buffer(struct uart_port *port) +{ + /* + * In uart_flush_buffer(), the xmit circular buffer has just been + * cleared, so we have to reset tx_dma_len accordingly. + */ + to_sci_port(port)->tx_dma_len = 0; +} +#else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) { } @@ -1553,7 +1562,9 @@ static inline void sci_request_dma(struc static inline void sci_free_dma(struct uart_port *port) { } -#endif + +#define sci_flush_buffer NULL +#endif /* !CONFIG_SERIAL_SH_SCI_DMA */ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { @@ -2551,6 +2562,7 @@ static const struct uart_ops sci_uart_op .break_ctl = sci_break_ctl, .startup = sci_startup, .shutdown = sci_shutdown, + .flush_buffer = sci_flush_buffer, .set_termios = sci_set_termios, .pm = sci_pm, .type = sci_type, Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/acpi-ec-fix-debugfs_create_-usage.patch queue-4.9/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.9/clk-renesas-rcar-gen2-fix-pll0-on-r-car-v2h-and-e2.patch queue-4.9/sh_eth-use-platform-device-for-printing-before-register_netdev.patch queue-4.9/arm-dts-armadillo800eva-split-lcd-mux-and-gpio.patch

7 years, 8 months

1
0
0 0

Patch "sh_eth: Use platform device for printing before register_netdev()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sh_eth: Use platform device for printing before register_netdev() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sh_eth-use-platform-device-for-printing-before-register_netdev.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Thu, 18 May 2017 15:01:34 +0200 Subject: sh_eth: Use platform device for printing before register_netdev() From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ] The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3133,7 +3133,7 @@ static int sh_eth_drv_probe(struct platf /* MDIO bus init */ ret = sh_mdio_init(mdp, pd); if (ret) { - dev_err(&ndev->dev, "failed to initialise MDIO\n"); + dev_err(&pdev->dev, "failed to initialise MDIO\n"); goto out_release; } Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/acpi-ec-fix-debugfs_create_-usage.patch queue-4.9/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.9/clk-renesas-rcar-gen2-fix-pll0-on-r-car-v2h-and-e2.patch queue-4.9/sh_eth-use-platform-device-for-printing-before-register_netdev.patch queue-4.9/arm-dts-armadillo800eva-split-lcd-mux-and-gpio.patch

7 years, 8 months

1
0
0 0

Patch "serial: 8250: omap: Disable DMA for console UART" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250: omap: Disable DMA for console UART to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250-omap-disable-dma-for-console-uart.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vignesh R <vigneshr(a)ti.com> Date: Sat, 22 Apr 2017 18:37:19 +0530 Subject: serial: 8250: omap: Disable DMA for console UART From: Vignesh R <vigneshr(a)ti.com> [ Upstream commit 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc ] Kernel always writes log messages to console via serial8250_console_write()->serial8250_console_putchar() which directly accesses UART_TX register _without_ using DMA. But, if other processes like systemd using same UART port, then these writes are handled by a different code flow using 8250_omap driver where there is provision to use DMA. It seems that it is possible that both DMA and CPU might simultaneously put data to UART FIFO and lead to potential loss of data due to FIFO overflow and weird data corruption. This happens when both kernel console and userspace tries to write simultaneously to the same UART port. Therefore, disable DMA on kernel console port to avoid potential race between CPU and DMA. Signed-off-by: Vignesh R <vigneshr(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_omap.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { Patches currently in stable-queue which might be from vigneshr(a)ti.com are queue-4.9/serial-8250-omap-disable-dma-for-console-uart.patch

7 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror