- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] [merged] fs-proc-kcorec-use-probe_kernel_read-instead-of-memcpy.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: fs/proc/kcore.c: use probe_kernel_read() instead of memcpy() has been removed from the -mm tree. Its filename was fs-proc-kcorec-use-probe_kernel_read-instead-of-memcpy.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Heiko Carstens <heiko.carstens(a)de.ibm.com> Subject: fs/proc/kcore.c: use probe_kernel_read() instead of memcpy() df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") added a bounce buffer to avoid hardened usercopy checks. Copying to the bounce buffer was implemented with a simple memcpy() assuming that it is always valid to read from kernel memory iff the kern_addr_valid() check passed. A simple, but pointless, test case like "dd if=/proc/kcore of=/dev/null" now can easily crash the kernel, since the former execption handling on invalid kernel addresses now doesn't work anymore. Also adding a kern_addr_valid() implementation wouldn't help here. Most architectures simply return 1 here, while a couple implemented a page table walk to figure out if something is mapped at the address in question. With DEBUG_PAGEALLOC active mappings are established and removed all the time, so that relying on the result of kern_addr_valid() before executing the memcpy() also doesn't work. Therefore simply use probe_kernel_read() to copy to the bounce buffer. This also allows to simplify read_kcore(). At least on s390 this fixes the observed crashes and doesn't introduce warnings that were removed with df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data"), even though the generic probe_kernel_read() implementation uses uaccess functions. While looking into this I'm also wondering if kern_addr_valid() could be completely removed...(?) Link: http://lkml.kernel.org/r/20171202132739.99971-1-heiko.carstens@de.ibm.com Fixes: df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Acked-by: Kees Cook <keescook(a)chromium.org> Cc: Jiri Olsa <jolsa(a)kernel.org> Cc: Al Viro <viro(a)ZenIV.linux.org.uk> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/proc/kcore.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff -puN fs/proc/kcore.c~fs-proc-kcorec-use-probe_kernel_read-instead-of-memcpy fs/proc/kcore.c --- a/fs/proc/kcore.c~fs-proc-kcorec-use-probe_kernel_read-instead-of-memcpy +++ a/fs/proc/kcore.c @@ -512,23 +512,15 @@ read_kcore(struct file *file, char __use return -EFAULT; } else { if (kern_addr_valid(start)) { - unsigned long n; - /* * Using bounce buffer to bypass the * hardened user copy kernel text checks. */ - memcpy(buf, (char *) start, tsz); - n = copy_to_user(buffer, buf, tsz); - /* - * We cannot distinguish between fault on source - * and fault on destination. When this happens - * we clear too and hope it will trigger the - * EFAULT again. - */ - if (n) { - if (clear_user(buffer + tsz - n, - n)) + if (probe_kernel_read(buf, (void *) start, tsz)) { + if (clear_user(buffer, tsz)) + return -EFAULT; + } else { + if (copy_to_user(buffer, buf, tsz)) return -EFAULT; } } else { _ Patches currently in -mm which might be from heiko.carstens(a)de.ibm.com are

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] [merged] kasan-dont-emit-builtin-calls-when-sanitization-is-off.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: kasan: don't emit builtin calls when sanitization is off has been removed from the -mm tree. Its filename was kasan-dont-emit-builtin-calls-when-sanitization-is-off.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Andrey Konovalov <andreyknvl(a)google.com> Subject: kasan: don't emit builtin calls when sanitization is off With KASAN enabled the kernel has two different memset() functions, one with KASAN checks (memset) and one without (__memset). KASAN uses some macro tricks to use the proper version where required. For example memset() calls in mm/slub.c are without KASAN checks, since they operate on poisoned slab object metadata. The issue is that clang emits memset() calls even when there is no memset() in the source code. They get linked with improper memset() implementation and the kernel fails to boot due to a huge amount of KASAN reports during early boot stages. The solution is to add -fno-builtin flag for files with KASAN_SANITIZE := n marker. Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.151638459… Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com> Acked-by: Nick Desaulniers <ndesaulniers(a)google.com> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Michal Marek <michal.lkml(a)markovi.net> Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- Makefile | 3 ++- scripts/Makefile.kasan | 3 +++ scripts/Makefile.lib | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-) diff -puN Makefile~kasan-dont-emit-builtin-calls-when-sanitization-is-off Makefile --- a/Makefile~kasan-dont-emit-builtin-calls-when-sanitization-is-off +++ a/Makefile @@ -434,7 +434,8 @@ export MAKE LEX YACC AWK GENKSYMS INSTAL export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_KASAN CFLAGS_UBSAN +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE +export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL diff -puN scripts/Makefile.kasan~kasan-dont-emit-builtin-calls-when-sanitization-is-off scripts/Makefile.kasan --- a/scripts/Makefile.kasan~kasan-dont-emit-builtin-calls-when-sanitization-is-off +++ a/scripts/Makefile.kasan @@ -31,4 +31,7 @@ else endif CFLAGS_KASAN += $(call cc-option, -fsanitize-address-use-after-scope) + +CFLAGS_KASAN_NOSANITIZE := -fno-builtin + endif diff -puN scripts/Makefile.lib~kasan-dont-emit-builtin-calls-when-sanitization-is-off scripts/Makefile.lib --- a/scripts/Makefile.lib~kasan-dont-emit-builtin-calls-when-sanitization-is-off +++ a/scripts/Makefile.lib @@ -121,7 +121,7 @@ endif ifeq ($(CONFIG_KASAN),y) _c_flags += $(if $(patsubst n%,, \ $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \ - $(CFLAGS_KASAN)) + $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE)) endif ifeq ($(CONFIG_UBSAN),y) _ Patches currently in -mm which might be from andreyknvl(a)google.com are

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] [PATCHES] Networking

by David Miller

Please queue up the following networking bug fixes for 4.9.x, 4.14.x, and 4.15.x -stable, respectively. Thanks!

7 years, 4 months

2
1
0 0

[Linux-stable-mirror] Patch "tcp: release sk_frag.page in tcp_disconnect" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcp: release sk_frag.page in tcp_disconnect to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcp-release-sk_frag.page-in-tcp_disconnect.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:38:15 PST 2018 From: Li RongQing <lirongqing(a)baidu.com> Date: Fri, 26 Jan 2018 16:40:41 +0800 Subject: tcp: release sk_frag.page in tcp_disconnect From: Li RongQing <lirongqing(a)baidu.com> [ Upstream commit 9b42d55a66d388e4dd5550107df051a9637564fc ] socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue Signed-off-by: Li RongQing <lirongqing(a)baidu.com> Cc: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/tcp.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2280,6 +2280,12 @@ int tcp_disconnect(struct sock *sk, int WARN_ON(inet->inet_num && !icsk->icsk_bind_hash); + if (sk->sk_frag.page) { + put_page(sk->sk_frag.page); + sk->sk_frag.page = NULL; + sk->sk_frag.offset = 0; + } + sk->sk_error_report(sk); return err; } Patches currently in stable-queue which might be from lirongqing(a)baidu.com are queue-3.18/tcp-release-sk_frag.page-in-tcp_disconnect.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "qlcnic: fix deadlock bug" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qlcnic: fix deadlock bug to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qlcnic-fix-deadlock-bug.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:38:15 PST 2018 From: Junxiao Bi <junxiao.bi(a)oracle.com> Date: Mon, 29 Jan 2018 17:53:42 +0800 Subject: qlcnic: fix deadlock bug From: Junxiao Bi <junxiao.bi(a)oracle.com> [ Upstream commit 233ac3891607f501f08879134d623b303838f478 ] The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by: Junxiao Bi <junxiao.bi(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3825,7 +3825,7 @@ static void qlcnic_83xx_flush_mbx_queue( struct list_head *head = &mbx->cmd_q; struct qlcnic_cmd_args *cmd = NULL; - spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock); while (!list_empty(head)) { cmd = list_entry(head->next, struct qlcnic_cmd_args, list); @@ -3836,7 +3836,7 @@ static void qlcnic_83xx_flush_mbx_queue( qlcnic_83xx_notify_cmd_completion(adapter, cmd); } - spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); } static int qlcnic_83xx_check_mbx_status(struct qlcnic_adapter *adapter) @@ -3872,12 +3872,12 @@ static void qlcnic_83xx_dequeue_mbx_cmd( { struct qlcnic_mailbox *mbx = adapter->ahw->mailbox; - spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock); list_del(&cmd->list); mbx->num_cmds--; - spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); qlcnic_83xx_notify_cmd_completion(adapter, cmd); } @@ -3942,7 +3942,7 @@ static int qlcnic_83xx_enqueue_mbx_cmd(s init_completion(&cmd->completion); cmd->rsp_opcode = QLC_83XX_MBX_RESPONSE_UNKNOWN; - spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock); list_add_tail(&cmd->list, &mbx->cmd_q); mbx->num_cmds++; @@ -3950,7 +3950,7 @@ static int qlcnic_83xx_enqueue_mbx_cmd(s *timeout = cmd->total_cmds * QLC_83XX_MBX_TIMEOUT; queue_work(mbx->work_q, &mbx->work); - spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); return 0; } @@ -4046,15 +4046,15 @@ static void qlcnic_83xx_mailbox_worker(s mbx->rsp_status = QLC_83XX_MBX_RESPONSE_WAIT; spin_unlock_irqrestore(&mbx->aen_lock, flags); - spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock); if (list_empty(head)) { - spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); return; } cmd = list_entry(head->next, struct qlcnic_cmd_args, list); - spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); mbx_ops->encode_cmd(adapter, cmd); mbx_ops->nofity_fw(adapter, QLC_83XX_MBX_REQUEST); Patches currently in stable-queue which might be from junxiao.bi(a)oracle.com are queue-3.18/qlcnic-fix-deadlock-bug.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "r8169: fix RTL8168EP take too long to complete driver initialization." has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled r8169: fix RTL8168EP take too long to complete driver initialization. to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: r8169-fix-rtl8168ep-take-too-long-to-complete-driver-initialization.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:38:15 PST 2018 From: Chunhao Lin <hau(a)realtek.com> Date: Wed, 31 Jan 2018 01:32:36 +0800 Subject: r8169: fix RTL8168EP take too long to complete driver initialization. From: Chunhao Lin <hau(a)realtek.com> [ Upstream commit 086ca23d03c0d2f4088f472386778d293e15c5f6 ] Driver check the wrong register bit in rtl_ocp_tx_cond() that keep driver waiting until timeout. Fix this by waiting for the right register bit. Signed-off-by: Chunhao Lin <hau(a)realtek.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1375,7 +1375,7 @@ DECLARE_RTL_COND(rtl_ocp_tx_cond) { void __iomem *ioaddr = tp->mmio_addr; - return RTL_R8(IBISR0) & 0x02; + return RTL_R8(IBISR0) & 0x20; } static void rtl8168dp_driver_start(struct rtl8169_private *tp) @@ -1421,7 +1421,7 @@ static void rtl8168ep_driver_stop(struct void __iomem *ioaddr = tp->mmio_addr; RTL_W8(IBCR2, RTL_R8(IBCR2) & ~0x01); - rtl_msleep_loop_wait_low(tp, &rtl_ocp_tx_cond, 50, 2000); + rtl_msleep_loop_wait_high(tp, &rtl_ocp_tx_cond, 50, 2000); RTL_W8(IBISR0, RTL_R8(IBISR0) | 0x20); RTL_W8(IBCR0, RTL_R8(IBCR0) & ~0x01); ocp_write(tp, 0x01, 0x180, OOB_CMD_DRIVER_STOP); Patches currently in stable-queue which might be from hau(a)realtek.com are queue-3.18/r8169-fix-rtl8168ep-take-too-long-to-complete-driver-initialization.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "net: igmp: add a missing rcu locking section" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: igmp: add a missing rcu locking section to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-igmp-add-a-missing-rcu-locking-section.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:38:15 PST 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Thu, 1 Feb 2018 10:26:57 -0800 Subject: net: igmp: add a missing rcu locking section From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit e7aadb27a5415e8125834b84a74477bfbee4eff5 ] Newly added igmpv3_get_srcaddr() needs to be called under rcu lock. Timer callbacks do not ensure this locking. ============================= WARNING: suspicious RCU usage 4.15.0+ #200 Not tainted ----------------------------- ./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syzkaller616973/4074: #0: (&mm->mmap_sem){++++}, at: [<00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355 #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline] #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316 #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline] #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600 stack backtrace: CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592 __in_dev_get_rcu include/linux/inetdevice.h:216 [inline] igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline] igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389 add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432 add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565 igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605 igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722 igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938 Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Reported-by: syzbot <syzkaller(a)googlegroups.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/igmp.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -384,7 +384,11 @@ static struct sk_buff *igmpv3_newpack(st pip->frag_off = htons(IP_DF); pip->ttl = 1; pip->daddr = fl4.daddr; + + rcu_read_lock(); pip->saddr = igmpv3_get_srcaddr(dev, &fl4); + rcu_read_unlock(); + pip->protocol = IPPROTO_IGMP; pip->tot_len = 0; /* filled in later */ ip_select_ident(skb, NULL); Patches currently in stable-queue which might be from edumazet(a)google.com are queue-3.18/tcp-release-sk_frag.page-in-tcp_disconnect.patch queue-3.18/net-igmp-add-a-missing-rcu-locking-section.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "ip6mr: fix stale iterator" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6mr: fix stale iterator to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6mr-fix-stale-iterator.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:38:15 PST 2018 From: Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com> Date: Wed, 31 Jan 2018 16:29:30 +0200 Subject: ip6mr: fix stale iterator From: Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com> [ Upstream commit 4adfa79fc254efb7b0eb3cd58f62c2c3f805f1ba ] When we dump the ip6mr mfc entries via proc, we initialize an iterator with the table to dump but we don't clear the cache pointer which might be initialized from a prior read on the same descriptor that ended. This can result in lock imbalance (an unnecessary unlock) leading to other crashes and hangs. Clear the cache pointer like ipmr does to fix the issue. Thanks for the reliable reproducer. Here's syzbot's trace: WARNING: bad unlock balance detected! 4.15.0-rc3+ #128 Not tainted syzkaller971460/3195 is trying to release lock (mrt_lock) at: [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller971460/3195: #0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0 fs/seq_file.c:165 stack backtrace: CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561 __lock_release kernel/locking/lockdep.c:3775 [inline] lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023 __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 traverse+0x3bc/0xa00 fs/seq_file.c:135 seq_read+0x96a/0x13d0 fs/seq_file.c:189 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 BUG: sleeping function called from invalid context at lib/usercopy.c:25 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460 INFO: lockdep is turned off. CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060 __might_sleep+0x95/0x190 kernel/sched/core.c:6013 __might_fault+0xab/0x1d0 mm/memory.c:4525 _copy_to_user+0x2c/0xc0 lib/usercopy.c:25 copy_to_user include/linux/uaccess.h:155 [inline] seq_read+0xcb4/0x13d0 fs/seq_file.c:279 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0 lib/usercopy.c:26 Reported-by: syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669(a)syzkaller.appspotmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6mr.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -498,6 +498,7 @@ static void *ipmr_mfc_seq_start(struct s return ERR_PTR(-ENOENT); it->mrt = mrt; + it->cache = NULL; return *pos ? ipmr_mfc_seq_idx(net, seq->private, *pos - 1) : SEQ_START_TOKEN; } Patches currently in stable-queue which might be from nikolay(a)cumulusnetworks.com are queue-3.18/ip6mr-fix-stale-iterator.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "vhost_net: stop device during reset owner" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vhost_net: stop device during reset owner to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vhost_net-stop-device-during-reset-owner.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:22:35 PST 2018 From: Jason Wang <jasowang(a)redhat.com> Date: Thu, 25 Jan 2018 22:03:52 +0800 Subject: vhost_net: stop device during reset owner From: Jason Wang <jasowang(a)redhat.com> [ Upstream commit 4cd879515d686849eec5f718aeac62a70b067d82 ] We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset. Reported-by: syzbot+eb17c6162478cc50632c(a)syzkaller.appspotmail.com Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/vhost/net.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -981,6 +981,7 @@ static long vhost_net_reset_owner(struct } vhost_net_stop(n, &tx_sock, &rx_sock); vhost_net_flush(n); + vhost_dev_stop(&n->dev); vhost_dev_reset_owner(&n->dev, memory); vhost_net_vq_reset(n); done: Patches currently in stable-queue which might be from jasowang(a)redhat.com are queue-4.4/vhost_net-stop-device-during-reset-owner.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] Patch "vhost_net: stop device during reset owner" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vhost_net: stop device during reset owner to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vhost_net-stop-device-during-reset-owner.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 7 11:22:35 PST 2018 From: Jason Wang <jasowang(a)redhat.com> Date: Thu, 25 Jan 2018 22:03:52 +0800 Subject: vhost_net: stop device during reset owner From: Jason Wang <jasowang(a)redhat.com> [ Upstream commit 4cd879515d686849eec5f718aeac62a70b067d82 ] We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset. Reported-by: syzbot+eb17c6162478cc50632c(a)syzkaller.appspotmail.com Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/vhost/net.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -1009,6 +1009,7 @@ static long vhost_net_reset_owner(struct } vhost_net_stop(n, &tx_sock, &rx_sock); vhost_net_flush(n); + vhost_dev_stop(&n->dev); vhost_dev_reset_owner(&n->dev, memory); vhost_net_vq_reset(n); done: Patches currently in stable-queue which might be from jasowang(a)redhat.com are queue-3.18/vhost_net-stop-device-during-reset-owner.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror