- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "usbip: prevent bind loops on devices attached to vhci_hcd" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usbip: prevent bind loops on devices attached to vhci_hcd to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usbip-prevent-bind-loops-on-devices-attached-to-vhci_hcd.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ef54cf0c600fb8f5737fb001a9e357edda1a1de8 Mon Sep 17 00:00:00 2001 From: Shuah Khan <shuahkh(a)osg.samsung.com> Date: Wed, 17 Jan 2018 12:07:30 -0700 Subject: usbip: prevent bind loops on devices attached to vhci_hcd From: Shuah Khan <shuahkh(a)osg.samsung.com> commit ef54cf0c600fb8f5737fb001a9e357edda1a1de8 upstream. usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/usb/usbip/src/usbip_bind.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/tools/usb/usbip/src/usbip_bind.c +++ b/tools/usb/usbip/src/usbip_bind.c @@ -144,6 +144,7 @@ static int bind_device(char *busid) int rc; struct udev *udev; struct udev_device *dev; + const char *devpath; /* Check whether the device with this bus ID exists. */ udev = udev_new(); @@ -152,8 +153,16 @@ static int bind_device(char *busid) err("device with the specified bus ID does not exist"); return -1; } + devpath = udev_device_get_devpath(dev); udev_unref(udev); + /* If the device is already attached to vhci_hcd - bail out */ + if (strstr(devpath, USBIP_VHCI_DRV_NAME)) { + err("bind loop detected: device: %s is attached to %s\n", + devpath, USBIP_VHCI_DRV_NAME); + return -1; + } + rc = unbind_other(busid); if (rc == UNBIND_ST_FAILED) { err("could not unbind driver from device on busid %s", busid); Patches currently in stable-queue which might be from shuahkh(a)osg.samsung.com are queue-4.15/usbip-list-don-t-list-devices-attached-to-vhci_hcd.patch queue-4.15/usbip-prevent-bind-loops-on-devices-attached-to-vhci_hcd.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "usbip: list: don't list devices attached to vhci_hcd" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usbip: list: don't list devices attached to vhci_hcd to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usbip-list-don-t-list-devices-attached-to-vhci_hcd.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ef824501f50846589f02173d73ce3fe6021a9d2a Mon Sep 17 00:00:00 2001 From: Shuah Khan <shuahkh(a)osg.samsung.com> Date: Wed, 17 Jan 2018 12:08:03 -0700 Subject: usbip: list: don't list devices attached to vhci_hcd From: Shuah Khan <shuahkh(a)osg.samsung.com> commit ef824501f50846589f02173d73ce3fe6021a9d2a upstream. usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/usb/usbip/src/usbip_list.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/tools/usb/usbip/src/usbip_list.c +++ b/tools/usb/usbip/src/usbip_list.c @@ -187,6 +187,7 @@ static int list_devices(bool parsable) const char *busid; char product_name[128]; int ret = -1; + const char *devpath; /* Create libudev context. */ udev = udev_new(); @@ -209,6 +210,14 @@ static int list_devices(bool parsable) path = udev_list_entry_get_name(dev_list_entry); dev = udev_device_new_from_syspath(udev, path); + /* Ignore devices attached to vhci_hcd */ + devpath = udev_device_get_devpath(dev); + if (strstr(devpath, USBIP_VHCI_DRV_NAME)) { + dbg("Skip the device %s already attached to %s\n", + devpath, USBIP_VHCI_DRV_NAME); + continue; + } + /* Get device information. */ idVendor = udev_device_get_sysattr_value(dev, "idVendor"); idProduct = udev_device_get_sysattr_value(dev, "idProduct"); Patches currently in stable-queue which might be from shuahkh(a)osg.samsung.com are queue-4.15/usbip-list-don-t-list-devices-attached-to-vhci_hcd.patch queue-4.15/usbip-prevent-bind-loops-on-devices-attached-to-vhci_hcd.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: uas: unconditionally bring back host after reset" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: uas: unconditionally bring back host after reset to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-uas-unconditionally-bring-back-host-after-reset.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cbeef22fd611c4f47c494b821b2b105b8af970bb Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oneukum(a)suse.com> Date: Thu, 11 Jan 2018 13:10:16 +0100 Subject: usb: uas: unconditionally bring back host after reset From: Oliver Neukum <oneukum(a)suse.com> commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by: Oliver Neukum <oneukum(a)suse.com> Reported-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/uas.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -1076,20 +1076,19 @@ static int uas_post_reset(struct usb_int return 0; err = uas_configure_endpoints(devinfo); - if (err) { + if (err && err != ENODEV) shost_printk(KERN_ERR, shost, "%s: alloc streams error %d after reset", __func__, err); - return 1; - } + /* we must unblock the host in every case lest we deadlock */ spin_lock_irqsave(shost->host_lock, flags); scsi_report_bus_reset(shost, 0); spin_unlock_irqrestore(shost->host_lock, flags); scsi_unblock_requests(shost); - return 0; + return err ? 1 : 0; } static int uas_suspend(struct usb_interface *intf, pm_message_t message) Patches currently in stable-queue which might be from oneukum(a)suse.com are queue-4.15/usb-uas-unconditionally-bring-back-host-after-reset.patch queue-4.15/cdc-acm-apply-quirk-for-card-reader.patch queue-4.15/usb-cdc-acm-do-not-log-urb-submission-errors-on-disconnect.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: simple: add Motorola Tetra driver" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: simple: add Motorola Tetra driver to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-simple-add-motorola-tetra-driver.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 46fe895e22ab3845515ec06b01eaf1282b342e29 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Thu, 18 Jan 2018 14:46:41 +1100 Subject: USB: serial: simple: add Motorola Tetra driver From: Johan Hovold <johan(a)kernel.org> commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by: Max Schulze <max.schulze(a)posteo.de> Tested-by: Max Schulze <max.schulze(a)posteo.de> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/Kconfig | 1 + drivers/usb/serial/usb-serial-simple.c | 7 +++++++ 2 files changed, 8 insertions(+) --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -63,6 +63,7 @@ config USB_SERIAL_SIMPLE - Google USB serial devices - HP4x calculators - a number of Motorola phones + - Motorola Tetra devices - Novatel Wireless GPS receivers - Siemens USB/MPI adapter. - ViVOtech ViVOpay USB device. --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -77,6 +77,11 @@ DEVICE(vivopay, VIVOPAY_IDS); { USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */ DEVICE(moto_modem, MOTO_IDS); +/* Motorola Tetra driver */ +#define MOTOROLA_TETRA_IDS() \ + { USB_DEVICE(0x0cad, 0x9011) } /* Motorola Solutions TETRA PEI */ +DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS); + /* Novatel Wireless GPS driver */ #define NOVATEL_IDS() \ { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */ @@ -107,6 +112,7 @@ static struct usb_serial_driver * const &google_device, &vivopay_device, &moto_modem_device, + &motorola_tetra_device, &novatel_gps_device, &hp4x_device, &suunto_device, @@ -122,6 +128,7 @@ static const struct usb_device_id id_tab GOOGLE_IDS(), VIVOPAY_IDS(), MOTO_IDS(), + MOTOROLA_TETRA_IDS(), NOVATEL_IDS(), HP4X_IDS(), SUUNTO_IDS(), Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.15/usb-serial-pl2303-new-device-id-for-chilitag.patch queue-4.15/usb-serial-simple-add-motorola-tetra-driver.patch queue-4.15/usb-serial-io_edgeport-fix-possible-sleep-in-atomic.patch queue-4.15/usb-option-add-support-for-fs040u-modem.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: pl2303: new device id for Chilitag" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: pl2303: new device id for Chilitag to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-pl2303-new-device-id-for-chilitag.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Date: Thu, 25 Jan 2018 09:48:55 +0100 Subject: USB: serial: pl2303: new device id for Chilitag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu(a)prolific.com.tw> Acked-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -38,6 +38,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -12,6 +12,7 @@ #define PL2303_PRODUCT_ID_DCU11 0x1234 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 +#define PL2303_PRODUCT_ID_CHILITAG 0xaaa8 #define PL2303_PRODUCT_ID_ALDIGA 0x0611 #define PL2303_PRODUCT_ID_MMX 0x0612 #define PL2303_PRODUCT_ID_GPRS 0x0609 Patches currently in stable-queue which might be from gregkh(a)linuxfoundation.org are queue-4.15/crypto-ecdh-fix-typo-in-kpp-dependency-of-crypto_ecdh.patch queue-4.15/hid-wacom-ekr-ensure-devres-groups-at-higher-indexes-are-released.patch queue-4.15/alsa-hda-reduce-the-suspend-time-consumption-for-alc256.patch queue-4.15/staging-lustre-separate-a-connection-destroy-from-free-struct-kib_conn.patch queue-4.15/tty-fix-data-race-between-tty_init_dev-and-flush-of-buf.patch queue-4.15/crypto-aesni-fix-out-of-bounds-access-of-the-data-buffer-in-generic-gcm-aesni.patch queue-4.15/crypto-af_alg-whitelist-mask-and-type.patch queue-4.15/hid-wacom-fix-reporting-of-touch-toggle-wacom_hid_wd_mute_device-events.patch queue-4.15/crypto-aesni-handle-zero-length-dst-buffer.patch queue-4.15/mei-me-allow-runtime-pm-for-platform-with-d0i3.patch queue-4.15/iio-chemical-ccs811-fix-output-of-iio_concentration-channels.patch queue-4.15/staging-ccree-fix-fips-event-irq-handling-build.patch queue-4.15/test_firmware-fix-missing-unlock-on-error-in-config_num_requests_store.patch queue-4.15/staging-ccree-nullify-backup_info-when-unused.patch queue-4.15/gpio-iop-add-missing-module_description-author-license.patch queue-4.15/bluetooth-hci_serdev-init-hci_uart-proto_lock-to-avoid-oops.patch queue-4.15/usbip-list-don-t-list-devices-attached-to-vhci_hcd.patch queue-4.15/crypto-aesni-add-wrapper-for-generic-gcm-aes.patch queue-4.15/usb-uas-unconditionally-bring-back-host-after-reset.patch queue-4.15/crypto-aesni-fix-typo-in-generic_gcmaes_decrypt.patch queue-4.15/usb-gadget-fix-high-bandwidth-check-in-usb_gadget_ep_match_desc.patch queue-4.15/usbip-prevent-bind-loops-on-devices-attached-to-vhci_hcd.patch queue-4.15/input-synaptics-rmi4-do-not-delete-interrupt-memory-too-early.patch queue-4.15/android-binder-remove-waitqueue-when-thread-exits.patch queue-4.15/ima-policy-fix-parsing-of-fsuuid.patch queue-4.15/spi-imx-do-not-access-registers-while-clocks-disabled.patch queue-4.15/cdc-acm-apply-quirk-for-card-reader.patch queue-4.15/crypto-aesni-fix-out-of-bounds-access-of-the-aad-buffer-in-generic-gcm-aesni.patch queue-4.15/serial-imx-only-wakeup-via-rtsden-bit-if-the-system-has-rts-cts.patch queue-4.15/serial-8250_dw-revert-improve-clock-rate-setting.patch queue-4.15/serial-8250_of-fix-return-code-when-probe-function-fails-to-get-reset.patch queue-4.15/iio-adc-stm32-fix-scan-of-multiple-channels-with-dma.patch queue-4.15/power-reset-zx-reboot-add-missing-module_description-author-license.patch queue-4.15/igb-free-irqs-when-device-is-hotplugged.patch queue-4.15/scsi-aacraid-fix-udev-inquiry-race-condition.patch queue-4.15/scsi-aacraid-fix-hang-in-kdump.patch queue-4.15/tools-gpio-fix-build-error-with-musl-libc.patch queue-4.15/android-binder-use-vm_alloc-to-get-vm-area.patch queue-4.15/crypto-inside-secure-avoid-unmapping-dma-memory-that-was-not-mapped.patch queue-4.15/scsi-storvsc-missing-error-code-in-storvsc_probe.patch queue-4.15/gpio-fix-kernel-stack-leak-to-userspace.patch queue-4.15/gpio-ath79-add-missing-module_description-license.patch queue-4.15/usb-serial-pl2303-new-device-id-for-chilitag.patch queue-4.15/usb-serial-simple-add-motorola-tetra-driver.patch queue-4.15/usb-cdc-acm-do-not-log-urb-submission-errors-on-disconnect.patch queue-4.15/usb-serial-io_edgeport-fix-possible-sleep-in-atomic.patch queue-4.15/usb-option-add-support-for-fs040u-modem.patch queue-4.15/input-synaptics-rmi4-unmask-f03-interrupts-when-port-is-opened.patch queue-4.15/usb-f_fs-prevent-gadget-unbind-if-it-is-already-unbound.patch queue-4.15/crypto-inside-secure-fix-hash-when-length-is-a-multiple-of-a-block.patch queue-4.15/crypto-sha3-generic-fixes-for-alignment-and-big-endian-operation.patch queue-4.15/gpio-stmpe-i2c-transfer-are-forbiden-in-atomic-context.patch queue-4.15/mtd-nand-denali_pci-add-missing-module_description-author-license.patch queue-4.15/x86-efi-clarify-that-reset-attack-mitigation-needs-appropriate-userspace.patch queue-4.15/serial-8250_uniphier-fix-error-return-code-in-uniphier_uart_probe.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: io_edgeport: fix possible sleep-in-atomic" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: io_edgeport: fix possible sleep-in-atomic to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-io_edgeport-fix-possible-sleep-in-atomic.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c7b8f77872c73f69a16528a9eb87afefcccdc18b Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai <baijiaju1990(a)gmail.com> Date: Wed, 13 Dec 2017 20:34:36 +0800 Subject: USB: serial: io_edgeport: fix possible sleep-in-atomic From: Jia-Ju Bai <baijiaju1990(a)gmail.com> commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/io_edgeport.c | 1 - 1 file changed, 1 deletion(-) --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2282,7 +2282,6 @@ static int write_cmd_usb(struct edgeport /* something went wrong */ dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status); - usb_kill_urb(urb); usb_free_urb(urb); atomic_dec(&CmdUrbs); return status; Patches currently in stable-queue which might be from baijiaju1990(a)gmail.com are queue-4.15/usb-serial-io_edgeport-fix-possible-sleep-in-atomic.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: option: Add support for FS040U modem" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: option: Add support for FS040U modem to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-option-add-support-for-fs040u-modem.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 69341bd15018da0a662847e210f9b2380c71e623 Mon Sep 17 00:00:00 2001 From: OKAMOTO Yoshiaki <yokamoto(a)allied-telesis.co.jp> Date: Tue, 16 Jan 2018 09:51:17 +0000 Subject: usb: option: Add support for FS040U modem From: OKAMOTO Yoshiaki <yokamoto(a)allied-telesis.co.jp> commit 69341bd15018da0a662847e210f9b2380c71e623 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by: Yoshiaki Okamoto <yokamoto(a)allied-telesis.co.jp> Signed-off-by: Hiroyuki Yamamoto <hyamamo(a)allied-telesis.co.jp> Acked-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -380,6 +380,9 @@ static void option_instat_callback(struc #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 #define FOUR_G_SYSTEMS_PRODUCT_W100 0x9b01 +/* Fujisoft products */ +#define FUJISOFT_PRODUCT_FS040U 0x9b02 + /* iBall 3.5G connect wireless modem */ #define IBALL_3_5G_CONNECT 0x9605 @@ -1894,6 +1897,8 @@ static const struct usb_device_id option { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100), .driver_info = (kernel_ulong_t)&four_g_w100_blacklist }, + {USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist}, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, Patches currently in stable-queue which might be from yokamoto(a)allied-telesis.co.jp are queue-4.15/usb-option-add-support-for-fs040u-modem.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-fix-high-bandwidth-check-in-usb_gadget_ep_match_desc.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 11fb37998759c48e4e4c200c974593cbeab25d3e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Date: Fri, 12 Jan 2018 17:50:02 +1100 Subject: usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc() From: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> commit 11fb37998759c48e4e4c200c974593cbeab25d3e upstream. The current code tries to test for bits that are masked out by usb_endpoint_maxp(). Instead, use the proper accessor to access the new high bandwidth bits. Signed-off-by: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -912,7 +912,7 @@ int usb_gadget_ep_match_desc(struct usb_ return 0; /* "high bandwidth" works only at high speed */ - if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11)) + if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp_mult(desc) > 1) return 0; switch (type) { Patches currently in stable-queue which might be from benh(a)kernel.crashing.org are queue-4.15/usb-gadget-fix-high-bandwidth-check-in-usb_gadget_ep_match_desc.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: f_fs: Prevent gadget unbind if it is already unbound" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: f_fs: Prevent gadget unbind if it is already unbound to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-f_fs-prevent-gadget-unbind-if-it-is-already-unbound.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ce5bf9a50daf2d9078b505aca1cea22e88ecb94a Mon Sep 17 00:00:00 2001 From: Hemant Kumar <hemantk(a)codeaurora.org> Date: Tue, 9 Jan 2018 12:30:53 +0530 Subject: usb: f_fs: Prevent gadget unbind if it is already unbound From: Hemant Kumar <hemantk(a)codeaurora.org> commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi <balbi(a)kernel.org> Cc: Greg KH <gregkh(a)linux-foundation.org> Cc: Michal Nazarewicz <mina86(a)mina86.com> Cc: John Stultz <john.stultz(a)linaro.org> Cc: Dmitry Shmidt <dimitrysh(a)google.com> Cc: Badhri <badhri(a)google.com> Cc: Android Kernel Team <kernel-team(a)android.com> Signed-off-by: Hemant Kumar <hemantk(a)codeaurora.org> [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by: Amit Pundir <amit.pundir(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/function/f_fs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -3700,7 +3700,8 @@ static void ffs_closed(struct ffs_data * ci = opts->func_inst.group.cg_item.ci_parent->ci_parent; ffs_dev_unlock(); - unregister_gadget_item(ci); + if (test_bit(FFS_FL_BOUND, &ffs->flags)) + unregister_gadget_item(ci); return; done: ffs_dev_unlock(); Patches currently in stable-queue which might be from hemantk(a)codeaurora.org are queue-4.15/usb-f_fs-prevent-gadget-unbind-if-it-is-already-unbound.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: cdc-acm: Do not log urb submission errors on disconnect" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: cdc-acm: Do not log urb submission errors on disconnect to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-cdc-acm-do-not-log-urb-submission-errors-on-disconnect.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f0386c083c2ce85284dc0b419d7b89c8e567c09f Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Sun, 14 Jan 2018 16:09:00 +0100 Subject: USB: cdc-acm: Do not log urb submission errors on disconnect From: Hans de Goede <hdegoede(a)redhat.com> commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Oliver Neukum <oneukum(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -425,7 +425,7 @@ static int acm_submit_read_urb(struct ac res = usb_submit_urb(acm->read_urbs[index], mem_flags); if (res) { - if (res != -EPERM) { + if (res != -EPERM && res != -ENODEV) { dev_err(&acm->data->dev, "urb %d failed submission with %d\n", index, res); Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.15/usb-uas-unconditionally-bring-back-host-after-reset.patch queue-4.15/usb-cdc-acm-do-not-log-urb-submission-errors-on-disconnect.patch

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror