This is a note to let you know that I've just added the patch titled
usb: gadget: bdc: 64-bit pointer capability check
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-gadget-bdc-64-bit-pointer-capability-check.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 Mon Sep 17 00:00:00 2001
From: Srinath Mannam <srinath.mannam(a)broadcom.com>
Date: Thu, 15 Jun 2017 14:39:22 +0530
Subject: usb: gadget: bdc: 64-bit pointer capability check
From: Srinath Mannam <srinath.mannam(a)broadcom.com>
commit c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 upstream.
Corrected the register to check the 64-bit pointer
capability state. 64-bit pointer implementation capability
was checking in wrong register, which causes the BDC
enumeration failure in 64-bit memory address.
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for
Broadcom USB3.0 device controller IP BDC")
Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com>
Signed-off-by: Srinath Mannam <srinath.mannam(a)broadcom.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -475,7 +475,7 @@ static int bdc_probe(struct platform_dev
bdc->dev = dev;
dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq);
- temp = bdc_readl(bdc->regs, BDC_BDCSC);
+ temp = bdc_readl(bdc->regs, BDC_BDCCAP1);
if ((temp & BDC_P64) &&
!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
dev_dbg(bdc->dev, "Using 64-bit address\n");
Patches currently in stable-queue which might be from srinath.mannam(a)broadcom.com are
queue-4.9/usb-gadget-bdc-64-bit-pointer-capability-check.patch
This is a note to let you know that I've just added the patch titled
usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-dwc3-fix-gdbgfifospace_type-values.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a Mon Sep 17 00:00:00 2001
From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com>
Date: Fri, 2 Feb 2018 13:21:35 -0800
Subject: usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com>
commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream.
The FIFO/Queue type values are incorrect. Correct them according to
DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25).
Additionally, this patch includes ProtocolStatusQ and AuxEventQ types.
Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper")
Signed-off-by: Thinh Nguyen <thinhn(a)synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/dwc3/core.h | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -159,13 +159,15 @@
#define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0)
#define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
-#define DWC3_TXFIFOQ 1
-#define DWC3_RXFIFOQ 3
-#define DWC3_TXREQQ 5
-#define DWC3_RXREQQ 7
-#define DWC3_RXINFOQ 9
-#define DWC3_DESCFETCHQ 13
-#define DWC3_EVENTQ 15
+#define DWC3_TXFIFOQ 0
+#define DWC3_RXFIFOQ 1
+#define DWC3_TXREQQ 2
+#define DWC3_RXREQQ 3
+#define DWC3_RXINFOQ 4
+#define DWC3_PSTATQ 5
+#define DWC3_DESCFETCHQ 6
+#define DWC3_EVENTQ 7
+#define DWC3_AUXEVENTQ 8
/* Global RX Threshold Configuration Register */
#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
Patches currently in stable-queue which might be from Thinh.Nguyen(a)synopsys.com are
queue-4.9/usb-dwc3-fix-gdbgfifospace_type-values.patch
This is a note to let you know that I've just added the patch titled
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
scsi-qla2xxx-fix-extraneous-ref-on-sp-s-after-adapter-break.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 4cd3b6ebff8510b2139d64024411207090cfe0a9 Mon Sep 17 00:00:00 2001
From: Bill Kuzeja <William.Kuzeja(a)stratus.com>
Date: Thu, 25 May 2017 15:26:31 -0400
Subject: scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
From: Bill Kuzeja <William.Kuzeja(a)stratus.com>
commit 4cd3b6ebff8510b2139d64024411207090cfe0a9 upstream.
Hung task timeouts can result if a qlogic board breaks unexpectedly
while running I/O. These tasks become hung because command srb reference
counts are not going to zero, hence the affected srbs and commands do
not get freed. This fix accounts for this extra reference in the srbs in
the case of a board failure.
Fixes: a465537ad1a4 ("qla2xxx: Disable the adapter and skip error recovery in case of register disconnect")
Signed-off-by: Bill Kuzeja <william.kuzeja(a)stratus.com>
Acked-by: Himanshu Madhani <himanshu.madhani(a)cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_os.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1443,7 +1443,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
void
qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
{
- int que, cnt;
+ int que, cnt, status;
unsigned long flags;
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
@@ -1473,8 +1473,12 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *
*/
sp_get(sp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- qla2xxx_eh_abort(GET_CMD_SP(sp));
+ status = qla2xxx_eh_abort(GET_CMD_SP(sp));
spin_lock_irqsave(&ha->hardware_lock, flags);
+ /* Get rid of extra reference if immediate exit
+ * from ql2xxx_eh_abort */
+ if (status == FAILED && (qla2x00_isp_reg_stat(ha)))
+ atomic_dec(&sp->ref_count);
}
req->outstanding_cmds[cnt] = NULL;
sp->done(vha, sp, res);
Patches currently in stable-queue which might be from William.Kuzeja(a)stratus.com are
queue-4.9/scsi-qla2xxx-fix-extraneous-ref-on-sp-s-after-adapter-break.patch
This is a note to let you know that I've just added the patch titled
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <weiyongjun1(a)huawei.com>
Date: Tue, 23 Jan 2018 09:35:14 +0000
Subject: USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
From: Wei Yongjun <weiyongjun1(a)huawei.com>
commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream.
Add the missing platform_device_put() before return from bdc_pci_probe()
in the platform_device_add_resources() error handling case.
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/gadget/udc/bdc/bdc_pci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/gadget/udc/bdc/bdc_pci.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c
@@ -82,6 +82,7 @@ static int bdc_pci_probe(struct pci_dev
if (ret) {
dev_err(&pci->dev,
"couldn't add resources to bdc device\n");
+ platform_device_put(bdc);
return ret;
}
Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are
queue-4.4/usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch
This is a note to let you know that I've just added the patch titled
usb: gadget: bdc: 64-bit pointer capability check
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-gadget-bdc-64-bit-pointer-capability-check.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 Mon Sep 17 00:00:00 2001
From: Srinath Mannam <srinath.mannam(a)broadcom.com>
Date: Thu, 15 Jun 2017 14:39:22 +0530
Subject: usb: gadget: bdc: 64-bit pointer capability check
From: Srinath Mannam <srinath.mannam(a)broadcom.com>
commit c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 upstream.
Corrected the register to check the 64-bit pointer
capability state. 64-bit pointer implementation capability
was checking in wrong register, which causes the BDC
enumeration failure in 64-bit memory address.
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for
Broadcom USB3.0 device controller IP BDC")
Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com>
Signed-off-by: Srinath Mannam <srinath.mannam(a)broadcom.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -475,7 +475,7 @@ static int bdc_probe(struct platform_dev
bdc->dev = dev;
dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq);
- temp = bdc_readl(bdc->regs, BDC_BDCSC);
+ temp = bdc_readl(bdc->regs, BDC_BDCCAP1);
if ((temp & BDC_P64) &&
!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
dev_dbg(bdc->dev, "Using 64-bit address\n");
Patches currently in stable-queue which might be from srinath.mannam(a)broadcom.com are
queue-4.4/usb-gadget-bdc-64-bit-pointer-capability-check.patch
This is a note to let you know that I've just added the patch titled
usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove()
to the 4.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-gadget-udc-renesas_usb3-fix-oops-in-renesas_usb3_remove.patch
and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From e3190868e5f52fb26544f16463593d54ce46ce61 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com>
Date: Fri, 12 Jan 2018 20:00:56 +0900
Subject: usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove()
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com>
commit e3190868e5f52fb26544f16463593d54ce46ce61 upstream.
This patch fixes an issue that the renesas_usb3_remove() causes
NULL pointer dereference because the usb3_to_dev() macro will use
the gadget instance and it will be deleted before.
Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/gadget/udc/renesas_usb3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2410,7 +2410,7 @@ static int renesas_usb3_remove(struct pl
__renesas_usb3_ep_free_request(usb3->ep0_req);
if (usb3->phy)
phy_put(usb3->phy);
- pm_runtime_disable(usb3_to_dev(usb3));
+ pm_runtime_disable(&pdev->dev);
return 0;
}
Patches currently in stable-queue which might be from yoshihiro.shimoda.uh(a)renesas.com are
queue-4.15/usb-gadget-udc-renesas_usb3-fix-oops-in-renesas_usb3_remove.patch
This is a note to let you know that I've just added the patch titled
usb: dwc3: of-simple: fix oops by unbalanced clk disable call
to the 4.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-dwc3-of-simple-fix-oops-by-unbalanced-clk-disable-call.patch
and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From bff52352e0ccc2481f2b6b0d612ff8ff56c50f3a Mon Sep 17 00:00:00 2001
From: Enric Balletbo i Serra <enric.balletbo(a)collabora.com>
Date: Mon, 18 Dec 2017 16:14:36 +0100
Subject: usb: dwc3: of-simple: fix oops by unbalanced clk disable call
From: Enric Balletbo i Serra <enric.balletbo(a)collabora.com>
commit bff52352e0ccc2481f2b6b0d612ff8ff56c50f3a upstream.
dwc3_of_simple_dev_pm_ops has never been used since commit a0d8c4cfdf31
("usb: dwc3: of-simple: set dev_pm_ops"), but this commit has brought
and oops when unbind the device due this sequence:
dwc3_of_simple_remove
-> clk_disable ...
-> pm_runtime_put_sync
-> dwc3_of_simple_runtime_suspend
-> clk_disable (again)
This double call to clk_core_disable causes a kernel oops like this:
WARNING: CPU: 1 PID: 4022 at drivers/clk/clk.c:656 clk_core_disable+0x78/0x80
CPU: 1 PID: 4022 Comm: bash Not tainted 4.15.0-rc4+ #44
Hardware name: Google Kevin (DT)
pstate: 80000085 (Nzcv daIf -PAN -UAO)
pc : clk_core_disable+0x78/0x80
lr : clk_core_disable_lock+0x20/0x38
sp : ffff00000bbf3a90
...
Call trace:
clk_core_disable+0x78/0x80
clk_disable+0x1c/0x30
dwc3_of_simple_runtime_suspend+0x30/0x50
pm_generic_runtime_suspend+0x28/0x40
This patch fixes the unbalanced clk disable call by setting the num_clocks
variable to zero once the clocks were disabled.
Fixes: a0d8c4cfdf31 ("usb: dwc3: of-simple: set dev_pm_ops")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo(a)collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/dwc3/dwc3-of-simple.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -143,6 +143,7 @@ static int dwc3_of_simple_remove(struct
clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
}
+ simple->num_clocks = 0;
reset_control_assert(simple->resets);
reset_control_put(simple->resets);
Patches currently in stable-queue which might be from enric.balletbo(a)collabora.com are
queue-4.15/usb-dwc3-of-simple-fix-oops-by-unbalanced-clk-disable-call.patch
This is a note to let you know that I've just added the patch titled
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
to the 4.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch
and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <weiyongjun1(a)huawei.com>
Date: Tue, 23 Jan 2018 09:35:14 +0000
Subject: USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
From: Wei Yongjun <weiyongjun1(a)huawei.com>
commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream.
Add the missing platform_device_put() before return from bdc_pci_probe()
in the platform_device_add_resources() error handling case.
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/gadget/udc/bdc/bdc_pci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/gadget/udc/bdc/bdc_pci.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c
@@ -77,6 +77,7 @@ static int bdc_pci_probe(struct pci_dev
if (ret) {
dev_err(&pci->dev,
"couldn't add resources to bdc device\n");
+ platform_device_put(bdc);
return ret;
}
Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are
queue-4.15/usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch
This is a note to let you know that I've just added the patch titled
usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
to the 4.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-dwc3-core-power-off-core-phys-on-system_suspend-in-host-mode.patch
and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From c4a5153e87fdf6805f63ff57556260e2554155a5 Mon Sep 17 00:00:00 2001
From: Manu Gautam <mgautam(a)codeaurora.org>
Date: Thu, 18 Jan 2018 16:54:30 +0530
Subject: usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
From: Manu Gautam <mgautam(a)codeaurora.org>
commit c4a5153e87fdf6805f63ff57556260e2554155a5 upstream.
Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during
host bus-suspend/resume") updated suspend/resume routines to not
power_off and reinit PHYs/core for host mode.
It broke platforms that rely on DWC3 core to power_off PHYs to
enter low power state on system suspend.
Perform dwc3_core_exit/init only during host mode system_suspend/
resume to addresses power regression from above mentioned patch
and also allow USB session to stay connected across
runtime_suspend/resume in host mode. While at it also replace
existing checks for HOST only dr_mode with current_dr_role to
have similar core driver behavior for both Host-only and DRD+Host
configurations.
Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume")
Reviewed-by: Roger Quadros <rogerq(a)ti.com>
Signed-off-by: Manu Gautam <mgautam(a)codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/dwc3/core.c | 36 ++++++++++++++++++++++--------------
1 file changed, 22 insertions(+), 14 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3
reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
reg |= DWC3_GCTL_PRTCAPDIR(mode);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ dwc->current_dr_role = mode;
}
static void __dwc3_set_mode(struct work_struct *work)
@@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
- dwc->current_dr_role = dwc->desired_dr_role;
-
spin_unlock_irqrestore(&dwc->lock, flags);
switch (dwc->desired_dr_role) {
@@ -218,7 +218,7 @@ static int dwc3_core_soft_reset(struct d
* XHCI driver will reset the host block. If dwc3 was configured for
* host-only mode, then we can return early.
*/
- if (dwc->dr_mode == USB_DR_MODE_HOST)
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
return 0;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -915,7 +915,6 @@ static int dwc3_core_init_mode(struct dw
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
- dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
if (dwc->usb2_phy)
@@ -931,7 +930,6 @@ static int dwc3_core_init_mode(struct dw
}
break;
case USB_DR_MODE_HOST:
- dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
if (dwc->usb2_phy)
@@ -1279,7 +1277,7 @@ static int dwc3_remove(struct platform_d
}
#ifdef CONFIG_PM
-static int dwc3_suspend_common(struct dwc3 *dwc)
+static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
@@ -1291,6 +1289,10 @@ static int dwc3_suspend_common(struct dw
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
+ /* do nothing during host runtime_suspend */
+ if (!PMSG_IS_AUTO(msg))
+ dwc3_core_exit(dwc);
+ break;
default:
/* do nothing */
break;
@@ -1299,7 +1301,7 @@ static int dwc3_suspend_common(struct dw
return 0;
}
-static int dwc3_resume_common(struct dwc3 *dwc)
+static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
int ret;
@@ -1315,6 +1317,13 @@ static int dwc3_resume_common(struct dwc
spin_unlock_irqrestore(&dwc->lock, flags);
break;
case DWC3_GCTL_PRTCAP_HOST:
+ /* nothing to do on host runtime_resume */
+ if (!PMSG_IS_AUTO(msg)) {
+ ret = dwc3_core_init(dwc);
+ if (ret)
+ return ret;
+ }
+ break;
default:
/* do nothing */
break;
@@ -1326,12 +1335,11 @@ static int dwc3_resume_common(struct dwc
static int dwc3_runtime_checks(struct dwc3 *dwc)
{
switch (dwc->current_dr_role) {
- case USB_DR_MODE_PERIPHERAL:
- case USB_DR_MODE_OTG:
+ case DWC3_GCTL_PRTCAP_DEVICE:
if (dwc->connected)
return -EBUSY;
break;
- case USB_DR_MODE_HOST:
+ case DWC3_GCTL_PRTCAP_HOST:
default:
/* do nothing */
break;
@@ -1348,7 +1356,7 @@ static int dwc3_runtime_suspend(struct d
if (dwc3_runtime_checks(dwc))
return -EBUSY;
- ret = dwc3_suspend_common(dwc);
+ ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND);
if (ret)
return ret;
@@ -1364,7 +1372,7 @@ static int dwc3_runtime_resume(struct de
device_init_wakeup(dev, false);
- ret = dwc3_resume_common(dwc);
+ ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
if (ret)
return ret;
@@ -1411,7 +1419,7 @@ static int dwc3_suspend(struct device *d
struct dwc3 *dwc = dev_get_drvdata(dev);
int ret;
- ret = dwc3_suspend_common(dwc);
+ ret = dwc3_suspend_common(dwc, PMSG_SUSPEND);
if (ret)
return ret;
@@ -1427,7 +1435,7 @@ static int dwc3_resume(struct device *de
pinctrl_pm_select_default_state(dev);
- ret = dwc3_resume_common(dwc);
+ ret = dwc3_resume_common(dwc, PMSG_RESUME);
if (ret)
return ret;
Patches currently in stable-queue which might be from mgautam(a)codeaurora.org are
queue-4.15/usb-dwc3-core-power-off-core-phys-on-system_suspend-in-host-mode.patch
This is a note to let you know that I've just added the patch titled
usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
to the 4.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-dwc3-fix-gdbgfifospace_type-values.patch
and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a Mon Sep 17 00:00:00 2001
From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com>
Date: Fri, 2 Feb 2018 13:21:35 -0800
Subject: usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com>
commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream.
The FIFO/Queue type values are incorrect. Correct them according to
DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25).
Additionally, this patch includes ProtocolStatusQ and AuxEventQ types.
Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper")
Signed-off-by: Thinh Nguyen <thinhn(a)synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/dwc3/core.h | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -158,13 +158,15 @@
#define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0)
#define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
-#define DWC3_TXFIFOQ 1
-#define DWC3_RXFIFOQ 3
-#define DWC3_TXREQQ 5
-#define DWC3_RXREQQ 7
-#define DWC3_RXINFOQ 9
-#define DWC3_DESCFETCHQ 13
-#define DWC3_EVENTQ 15
+#define DWC3_TXFIFOQ 0
+#define DWC3_RXFIFOQ 1
+#define DWC3_TXREQQ 2
+#define DWC3_RXREQQ 3
+#define DWC3_RXINFOQ 4
+#define DWC3_PSTATQ 5
+#define DWC3_DESCFETCHQ 6
+#define DWC3_EVENTQ 7
+#define DWC3_AUXEVENTQ 8
/* Global RX Threshold Configuration Register */
#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
Patches currently in stable-queue which might be from Thinh.Nguyen(a)synopsys.com are
queue-4.15/usb-dwc3-fix-gdbgfifospace_type-values.patch