- Linux-stable-mirror - lists.linaro.org

Patch "Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-btusb-use-dmi-matching-for-qca-reset_resume-quirking.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1fdb926974695d3dbc05a429bafa266fdd16510e Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 20 Feb 2018 09:06:18 +0100 Subject: Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking From: Hans de Goede <hdegoede(a)redhat.com> commit 1fdb926974695d3dbc05a429bafa266fdd16510e upstream. Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable(a)vger.kernel.org Cc: Brian Norris <briannorris(a)chromium.org> Cc: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Reported-and-tested-by: Kevin Fenzi <kevin(a)scrye.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/btusb.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -21,6 +21,7 @@ * */ +#include <linux/dmi.h> #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/quirks.h> @@ -381,6 +382,21 @@ static const struct usb_device_id blackl { } /* Terminating entry */ }; +/* The Bluetooth USB module build into some devices needs to be reset on resume, + * this is a problem with the platform (likely shutting off all power) not with + * the module itself. So we use a DMI list to match known broken platforms. + */ +static const struct dmi_system_id btusb_needs_reset_resume_table[] = { + { + /* Lenovo Yoga 920 (QCA Rome device 0cf3:e300) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920"), + }, + }, + {} +}; + #define BTUSB_MAX_ISOC_FRAMES 10 #define BTUSB_INTR_RUNNING 0 @@ -3013,6 +3029,9 @@ static int btusb_probe(struct usb_interf hdev->send = btusb_send_frame; hdev->notify = btusb_notify; + if (dmi_check_system(btusb_needs_reset_resume_table)) + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; + #ifdef CONFIG_PM err = btusb_config_oob_wake(hdev); if (err) @@ -3099,12 +3118,6 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; - - /* QCA Rome devices lose their updated firmware over suspend, - * but the USB hub doesn't notice any status change. - * explicitly request a device reset on resume. - */ - interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #ifdef CONFIG_BT_HCIBTUSB_RTL Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.14/bluetooth-btusb-use-dmi-matching-for-qca-reset_resume-quirking.patch

7 years, 8 months

1
0
0 0

patch "Drivers: hv: vmbus: Fix ring buffer signaling" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Drivers: hv: vmbus: Fix ring buffer signaling to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 655296c8bbeffcf020558c4455305d597a73bde1 Mon Sep 17 00:00:00 2001 From: Michael Kelley <mhkelley(a)outlook.com> Date: Sun, 4 Mar 2018 22:24:08 -0700 Subject: Drivers: hv: vmbus: Fix ring buffer signaling Fix bugs in signaling the Hyper-V host when freeing space in the host->guest ring buffer: 1. The interrupt_mask must not be used to determine whether to signal on the host->guest ring buffer 2. The ring buffer write_index must be read (via hv_get_bytes_to_write) *after* pending_send_sz is read in order to avoid a race condition 3. Comparisons with pending_send_sz must treat the "equals" case as not-enough-space 4. Don't signal if the pending_send_sz feature is not present. Older versions of Hyper-V that don't implement this feature will poll. Fixes: 03bad714a161 ("vmbus: more host signalling avoidance") Cc: Stable <stable(a)vger.kernel.org> # 4.14 and above Signed-off-by: Michael Kelley <mhkelley(a)outlook.com> Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hv/ring_buffer.c | 52 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 17 deletions(-) diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index 50e071444a5c..8699bb969e7e 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -417,13 +417,24 @@ __hv_pkt_iter_next(struct vmbus_channel *channel, } EXPORT_SYMBOL_GPL(__hv_pkt_iter_next); +/* How many bytes were read in this iterator cycle */ +static u32 hv_pkt_iter_bytes_read(const struct hv_ring_buffer_info *rbi, + u32 start_read_index) +{ + if (rbi->priv_read_index >= start_read_index) + return rbi->priv_read_index - start_read_index; + else + return rbi->ring_datasize - start_read_index + + rbi->priv_read_index; +} + /* * Update host ring buffer after iterating over packets. */ void hv_pkt_iter_close(struct vmbus_channel *channel) { struct hv_ring_buffer_info *rbi = &channel->inbound; - u32 orig_write_sz = hv_get_bytes_to_write(rbi); + u32 curr_write_sz, pending_sz, bytes_read, start_read_index; /* * Make sure all reads are done before we update the read index since @@ -431,8 +442,12 @@ void hv_pkt_iter_close(struct vmbus_channel *channel) * is updated. */ virt_rmb(); + start_read_index = rbi->ring_buffer->read_index; rbi->ring_buffer->read_index = rbi->priv_read_index; + if (!rbi->ring_buffer->feature_bits.feat_pending_send_sz) + return; + /* * Issue a full memory barrier before making the signaling decision. * Here is the reason for having this barrier: @@ -446,26 +461,29 @@ void hv_pkt_iter_close(struct vmbus_channel *channel) */ virt_mb(); - /* If host has disabled notifications then skip */ - if (rbi->ring_buffer->interrupt_mask) + pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + if (!pending_sz) return; - if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) { - u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + /* + * Ensure the read of write_index in hv_get_bytes_to_write() + * happens after the read of pending_send_sz. + */ + virt_rmb(); + curr_write_sz = hv_get_bytes_to_write(rbi); + bytes_read = hv_pkt_iter_bytes_read(rbi, start_read_index); - /* - * If there was space before we began iteration, - * then host was not blocked. Also handles case where - * pending_sz is zero then host has nothing pending - * and does not need to be signaled. - */ - if (orig_write_sz > pending_sz) - return; + /* + * If there was space before we began iteration, + * then host was not blocked. + */ - /* If pending write will not fit, don't give false hope. */ - if (hv_get_bytes_to_write(rbi) < pending_sz) - return; - } + if (curr_write_sz - bytes_read > pending_sz) + return; + + /* If pending write will not fit, don't give false hope. */ + if (curr_write_sz <= pending_sz) + return; vmbus_setevent(channel); } -- 2.16.2

7 years, 8 months

1
0
0 0

[PATCH 1/7] fs/aio: Add explicit RCU grace period when freeing kioctx

by Tejun Heo

While fixing refcounting, e34ecee2ae79 ("aio: Fix a trinity splat") incorrectly removed explicit RCU grace period before freeing kioctx. The intention seems to be depending on the internal RCU grace periods of percpu_ref; however, percpu_ref uses a different flavor of RCU, sched-RCU. This can lead to kioctx being freed while RCU read protected dereferences are still in progress. Fix it by updating free_ioctx() to go through call_rcu() explicitly. v2: Comment added to explain double bouncing. Signed-off-by: Tejun Heo <tj(a)kernel.org> Reported-by: Jann Horn <jannh(a)google.com> Fixes: e34ecee2ae79 ("aio: Fix a trinity splat") Cc: Kent Overstreet <kent.overstreet(a)gmail.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: stable(a)vger.kernel.org --- fs/aio.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index a062d75..eb2e0cf 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -115,7 +115,8 @@ struct kioctx { struct page **ring_pages; long nr_pages; - struct work_struct free_work; + struct rcu_head free_rcu; + struct work_struct free_work; /* see free_ioctx() */ /* * signals when all in-flight requests are done @@ -588,6 +589,12 @@ static int kiocb_cancel(struct aio_kiocb *kiocb) return cancel(&kiocb->common); } +/* + * free_ioctx() should be RCU delayed to synchronize against the RCU + * protected lookup_ioctx() and also needs process context to call + * aio_free_ring(), so the double bouncing through kioctx->free_rcu and + * ->free_work. + */ static void free_ioctx(struct work_struct *work) { struct kioctx *ctx = container_of(work, struct kioctx, free_work); @@ -601,6 +608,14 @@ static void free_ioctx(struct work_struct *work) kmem_cache_free(kioctx_cachep, ctx); } +static void free_ioctx_rcufn(struct rcu_head *head) +{ + struct kioctx *ctx = container_of(head, struct kioctx, free_rcu); + + INIT_WORK(&ctx->free_work, free_ioctx); + schedule_work(&ctx->free_work); +} + static void free_ioctx_reqs(struct percpu_ref *ref) { struct kioctx *ctx = container_of(ref, struct kioctx, reqs); @@ -609,8 +624,8 @@ static void free_ioctx_reqs(struct percpu_ref *ref) if (ctx->rq_wait && atomic_dec_and_test(&ctx->rq_wait->count)) complete(&ctx->rq_wait->comp); - INIT_WORK(&ctx->free_work, free_ioctx); - schedule_work(&ctx->free_work); + /* Synchronize against RCU protected table->table[] dereferences */ + call_rcu(&ctx->free_rcu, free_ioctx_rcufn); } /* @@ -838,7 +853,7 @@ static int kill_ioctx(struct mm_struct *mm, struct kioctx *ctx, table->table[ctx->id] = NULL; spin_unlock(&mm->ioctx_lock); - /* percpu_ref_kill() will do the necessary call_rcu() */ + /* free_ioctx_reqs() will do the necessary RCU synchronization */ wake_up_all(&ctx->wait); /* -- 2.9.5

7 years, 8 months

1
1
0 0

Request for inclusion of couple of commits

by Nikolay Borisov

Hello Greg, I'd like to request the following commits (in that order) be merged into 4.4/4.9 stable branches: b7f8a09f8097 ("btrfs: Don't clear SGID when inheriting ACLs") - this one landed in 4.13 and was tagged for stable but it seems it got missed. d7d824966530 ("btrfs: preserve i_mode if __btrfs_set_acl() fails") - this one depends on the first commit for context but otherwise, should be trivial to backport.

7 years, 8 months

2
1
0 0

patch "staging: comedi: fix comedi_nsamples_left." added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: comedi: fix comedi_nsamples_left. to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From a42ae5905140c324362fe5036ae1dbb16e4d359c Mon Sep 17 00:00:00 2001 From: Frank Mori Hess <fmh6jj(a)gmail.com> Date: Thu, 15 Feb 2018 15:13:42 -0500 Subject: staging: comedi: fix comedi_nsamples_left. A rounding error was causing comedi_nsamples_left to return the wrong value when nsamples was not a multiple of the scan length. Cc: <stable(a)vger.kernel.org> # v4.4+ Signed-off-by: Frank Mori Hess <fmh6jj(a)gmail.com> Reviewed-by: Ian Abbott <abbotti(a)mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/comedi/drivers.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index e618a87521a3..9d733471ca2e 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -475,8 +475,7 @@ unsigned int comedi_nsamples_left(struct comedi_subdevice *s, struct comedi_cmd *cmd = &async->cmd; if (cmd->stop_src == TRIG_COUNT) { - unsigned int nscans = nsamples / cmd->scan_end_arg; - unsigned int scans_left = __comedi_nscans_left(s, nscans); + unsigned int scans_left = __comedi_nscans_left(s, cmd->stop_arg); unsigned int scan_pos = comedi_bytes_to_samples(s, async->scan_progress); unsigned long long samples_left = 0; -- 2.16.2

7 years, 8 months

1
0
0 0

Re: [PATCH AUTOSEL for 4.9 002/219] spi/bcm63xx: make spi subsystem aware of message size limits

by Jonas Gorski

On 6 March 2018 at 15:20, Mark Brown <broonie(a)kernel.org> wrote: > On Tue, Mar 06, 2018 at 02:42:43PM +0100, Jonas Gorski wrote: >> On 5 March 2018 at 21:35, Mark Brown <broonie(a)kernel.org> wrote: > >> > It's exposing more capability information but it's in the "how did this >> > ever work without the fix" range, and I'd worry that this might cause us >> > to do something like start exercising handling code in client drivers >> > that had never been tested. Not that I can immediately see any client >> > drivers in mainline that actually pay attention... :/ > >> I would assume that most spi client drivers use short messages, so >> they aren't affected unless the max message size is really short. >> m25p80 on the other hand will do arbitrarily large transfers/reads, so >> there it was supported first. > > There's a bunch of SPI drivers that do firmware downloads which I'd > expect to be affected, the limit the device has is tiny so it's > relatively easy to bump into it. It's very rare for devices to be so > limited so unfortunately client drivers don't generally check though. Well, at least for bcm63xx it's very rare to have something other than a flash chip, a (broadcom) ethernet switch management interface, or a SLIC/SLAC attached to the SPI controller. And AFAICT of these three only the flash chip uses large SPI transfers. Furthermore, unless you have a development board, you won't be able to attach anything different to it. So the chance to bump into the limits with other drivers is rather low. I would assume that this is true for most systems with a limited SPI controller. I would hope that most board designers are sensible enough to not add devices that won't work ;-) Regards Jonas

7 years, 8 months

1
0
0 0

[PATCH] media: rc: oops in ir_timer_keyup after device unplug

by Sean Young

If there is IR in the raw kfifo when ir_raw_event_unregister() is called, then kthread_stop() causes ir_raw_event_thread to be scheduled, decode some scancodes and re-arm timer_keyup. The timer_keyup then fires when the rc device is long gone. Cc: stable(a)vger.kernel.org Signed-off-by: Sean Young <sean(a)mess.org> --- drivers/media/rc/rc-main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 4a952108ba1e..8621761a680f 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1932,12 +1932,12 @@ void rc_unregister_device(struct rc_dev *dev) if (!dev) return; - del_timer_sync(&dev->timer_keyup); - del_timer_sync(&dev->timer_repeat); - if (dev->driver_type == RC_DRIVER_IR_RAW) ir_raw_event_unregister(dev); + del_timer_sync(&dev->timer_keyup); + del_timer_sync(&dev->timer_repeat); + rc_free_rx_device(dev); mutex_lock(&dev->lock); -- 2.14.3

7 years, 8 months

1
0
0 0

[PATCH] module: propagate error in modules_open()

by Leon Yu

otherwise kernel can oops later in seq_release() due to dereferencing null file->private_data which is only set if seq_open() succeeds. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: seq_release+0xc/0x30 Call Trace: close_pdeo+0x37/0xd0 proc_reg_release+0x5d/0x60 __fput+0x9d/0x1d0 ____fput+0x9/0x10 task_work_run+0x75/0x90 do_exit+0x252/0xa00 do_group_exit+0x36/0xb0 SyS_exit_group+0xf/0x10 Fixes: 516fb7f2e73d ("/proc/module: use the same logic as /proc/kallsyms for address exposure") Cc: Jessica Yu <jeyu(a)kernel.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: stable(a)vger.kernel.org # 4.15+ Signed-off-by: Leon Yu <chianglungyu(a)gmail.com> --- kernel/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index ad2d420024f6..e42764acedb4 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -4228,7 +4228,7 @@ static int modules_open(struct inode *inode, struct file *file) m->private = kallsyms_show_value() ? NULL : (void *)8ul; } - return 0; + return err; } static const struct file_operations proc_modules_operations = { -- 2.16.2

7 years, 8 months

1
0
0 0

Re: [PATCH AUTOSEL for 4.9 002/219] spi/bcm63xx: make spi subsystem aware of message size limits

by Jonas Gorski

On 5 March 2018 at 21:35, Mark Brown <broonie(a)kernel.org> wrote: > On Mon, Mar 05, 2018 at 08:07:46PM +0000, Sasha Levin wrote: >> On Mon, Mar 05, 2018 at 10:23:10AM +0000, Mark Brown wrote: >> >On Sat, Mar 03, 2018 at 10:27:56PM +0000, Sasha Levin wrote: > >> >> The bcm63xx SPI controller does not allow manual control of the CS >> >> lines and will toggle it automatically before and after sending data, >> >> so we are limited to messages that fit in the FIFO buffer. Since the CS >> >> lines aren't available as GPIOs either, we will need to make slave >> >> drivers aware of this limitation so they can handle them accordingly. > >> >This seems really aggressive for stable... > >> Why so? > > It's exposing more capability information but it's in the "how did this > ever work without the fix" range, and I'd worry that this might cause us > to do something like start exercising handling code in client drivers > that had never been tested. Not that I can immediately see any client > drivers in mainline that actually pay attention... :/ I would assume that most spi client drivers use short messages, so they aren't affected unless the max message size is really short. m25p80 on the other hand will do arbitrarily large transfers/reads, so there it was supported first. m25p80 supports max_transfer_size since 4,9, and max_message_size since 4.11 with commit 9e276de6a367cde07c1a63522152985d4e5cca8b. So that one would need to be backported as well for the max_message_size being actually meaningful. tinydrm-helpers also observes max_transfers_size since 4.11 with commit 9f69eb5c36a644571cca6b2f8dc5f6a7cba04a8b where it was added, but since this is a larger commit and not just a "bugfix" one, this doesn't seem like a candidate for backporting. Regards Jonas

7 years, 8 months

1
0
0 0

[PATCH resend] usb: quirks: add control message delay for 1b1c:1b20

by Danilo Krummrich

Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable(a)vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich(a)dk-develop.de> --- drivers/usb/core/message.c | 4 ++++ drivers/usb/core/quirks.c | 3 ++- include/linux/usb/quirks.h | 3 +++ 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index c64cf6c4a83d..0c11d40a12bc 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -151,6 +151,10 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); + /* Linger a bit, prior to the next control message. */ + if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) + msleep(200); + kfree(dr); return ret; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f4a548471f0f..54b019e267c5 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -230,7 +230,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, /* Corsair Strafe RGB */ - { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, /* Corsair K70 LUX */ { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index f1fcec2fd5f8..b7a99ce56bc9 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -63,4 +63,7 @@ */ #define USB_QUIRK_DISCONNECT_SUSPEND BIT(12) +/* Device needs a pause after every control message. */ +#define USB_QUIRK_DELAY_CTRL_MSG BIT(13) + #endif /* __LINUX_USB_QUIRKS_H */ -- 2.16.2

7 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror