- Linux-stable-mirror - lists.linaro.org

[PATCH v4 6/7] LoongArch: Automatically disable kaslr when the kernel loads from kexec_file

by Youling Tang

From: Youling Tang <tangyouling(a)kylinos.cn> Automatically disable kaslr when the kernel loads from kexec_file. kexec_file loads the secondary kernel image to a non-linked address, inherently providing KASLR-like randomization. However, on LoongArch where System RAM may be non-contiguous, enabling KASLR for the second kernel could relocate it to an invalid memory region and cause boot failure. Thus, we disable KASLR when "kexec_file" is detected in the command line. To ensure compatibility with older kernels loaded via kexec_file, this patch need be backported to stable branches. Cc: stable(a)vger.kernel.org Signed-off-by: Youling Tang <tangyouling(a)kylinos.cn> --- arch/loongarch/kernel/relocate.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/loongarch/kernel/relocate.c b/arch/loongarch/kernel/relocate.c index 50c469067f3a..4c097532cb88 100644 --- a/arch/loongarch/kernel/relocate.c +++ b/arch/loongarch/kernel/relocate.c @@ -140,6 +140,10 @@ static inline __init bool kaslr_disabled(void) if (str == boot_command_line || (str > boot_command_line && *(str - 1) == ' ')) return true; + str = strstr(boot_command_line, "kexec_file"); + if (str == boot_command_line || (str > boot_command_line && *(str - 1) == ' ')) + return true; + #ifdef CONFIG_HIBERNATION str = strstr(builtin_cmdline, "nohibernate"); if (str == builtin_cmdline || (str > builtin_cmdline && *(str - 1) == ' ')) -- 2.43.0

1 week, 4 days

1
0
0 0

HOME-HARDWARE

by HOME-HARDWARE

1 week, 4 days

1
0
0 0

[PATCH net] net: libwx: fix to enable RSS

by Jiawen Wu

When SRIOV is enabled, RSS is also supported for the functions. There is an incorrect flag judgement which causes RSS to fail to be enabled. Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled") Cc: stable(a)vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu(a)trustnetic.com> --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index bcd07a715752..5cb353a97d6d 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -2078,10 +2078,6 @@ static void wx_setup_mrqc(struct wx *wx) { u32 rss_field = 0; - /* VT, and RSS do not coexist at the same time */ - if (test_bit(WX_FLAG_VMDQ_ENABLED, wx->flags)) - return; - /* Disable indicating checksum in descriptor, enables RSS hash */ wr32m(wx, WX_PSR_CTL, WX_PSR_CTL_PCSD, WX_PSR_CTL_PCSD); -- 2.48.1

1 week, 4 days

3
2
0 0

[PATCH v2] net: dsa: mv88e6xxx: Fix fwnode reference leaks in mv88e6xxx_port_setup_leds

by Miaoqian Lin

Fix multiple fwnode reference leaks: 1. The function calls fwnode_get_named_child_node() to get the "leds" node, but never calls fwnode_handle_put(leds) to release this reference. 2. Within the fwnode_for_each_child_node() loop, the early return paths that don't properly release the "led" fwnode reference. This fix follows the same pattern as commit d029edefed39 ("net dsa: qca8k: fix usages of device_get_named_child_node()") Fixes: 94a2a84f5e9e ("net: dsa: mv88e6xxx: Support LED control") Cc: stable(a)vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- changes in v2: - use goto for cleanup in error paths - v1: https://lore.kernel.org/all/20250830085508.2107507-1-linmq006@gmail.com/ --- drivers/net/dsa/mv88e6xxx/leds.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/leds.c b/drivers/net/dsa/mv88e6xxx/leds.c index 1c88bfaea46b..ab3bc645da56 100644 --- a/drivers/net/dsa/mv88e6xxx/leds.c +++ b/drivers/net/dsa/mv88e6xxx/leds.c @@ -779,7 +779,8 @@ int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, int port) continue; if (led_num > 1) { dev_err(dev, "invalid LED specified port %d\n", port); - return -EINVAL; + ret = -EINVAL; + goto err_put_led; } if (led_num == 0) @@ -823,17 +824,25 @@ int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, int port) init_data.devname_mandatory = true; init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d:0%d", chip->info->name, port, led_num); - if (!init_data.devicename) - return -ENOMEM; + if (!init_data.devicename) { + ret = -ENOMEM; + goto err_put_led; + } ret = devm_led_classdev_register_ext(dev, l, &init_data); kfree(init_data.devicename); if (ret) { dev_err(dev, "Failed to init LED %d for port %d", led_num, port); - return ret; + goto err_put_led; } } + fwnode_handle_put(leds); return 0; + +err_put_led: + fwnode_handle_put(led); + fwnode_handle_put(leds); + return ret; } -- 2.35.1

1 week, 4 days

4
3
0 0

[PATCH net] netpoll: fix incorrect refcount handling causing incorrect cleanup

by Breno Leitao

commit efa95b01da18 ("netpoll: fix use after free") incorrectly ignored the refcount and prematurely set dev->npinfo to NULL during netpoll cleanup, leading to improper behavior and memory leaks. Scenario causing lack of proper cleanup: 1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is allocated, and refcnt = 1 - Keep in mind that npinfo is shared among all netpoll instances. In this case, there is just one. 2) Another netpoll is also associated with the same NIC and npinfo->refcnt += 1. - Now dev->npinfo->refcnt = 2; - There is just one npinfo associated to the netdev. 3) When the first netpolls goes to clean up: - The first cleanup succeeds and clears np->dev->npinfo, ignoring refcnt. - It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);` - Set dev->npinfo = NULL, without proper cleanup - No ->ndo_netpoll_cleanup() is either called 4) Now the second target tries to clean up - The second cleanup fails because np->dev->npinfo is already NULL. * In this case, ops->ndo_netpoll_cleanup() was never called, and the skb pool is not cleaned as well (for the second netpoll instance) - This leaks npinfo and skbpool skbs, which is clearly reported by kmemleak. Revert commit efa95b01da18 ("netpoll: fix use after free") and adds clarifying comments emphasizing that npinfo cleanup should only happen once the refcount reaches zero, ensuring stable and correct netpoll behavior. Cc: stable(a)vger.kernel.org Cc: jv(a)jvosburgh.net Fixes: efa95b01da18 ("netpoll: fix use after free") Signed-off-by: Breno Leitao <leitao(a)debian.org> --- I have a selftest that shows the memory leak when kmemleak is enabled and I will be submitting to net-next. Also, giving I am reverting commit efa95b01da18 ("netpoll: fix use after free"), which was supposed to fix a problem on bonding, I am copying Jay. --- net/core/netpoll.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 5f65b62346d4e..19676cd379640 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -815,6 +815,10 @@ static void __netpoll_cleanup(struct netpoll *np) if (!npinfo) return; + /* At this point, there is a single npinfo instance per netdevice, and + * its refcnt tracks how many netpoll structures are linked to it. We + * only perform npinfo cleanup when the refcnt decrements to zero. + */ if (refcount_dec_and_test(&npinfo->refcnt)) { const struct net_device_ops *ops; @@ -824,8 +828,7 @@ static void __netpoll_cleanup(struct netpoll *np) RCU_INIT_POINTER(np->dev->npinfo, NULL); call_rcu(&npinfo->rcu, rcu_cleanup_netpoll_info); - } else - RCU_INIT_POINTER(np->dev->npinfo, NULL); + } skb_pool_flush(np); } --- base-commit: 864ecc4a6dade82d3f70eab43dad0e277aa6fc78 change-id: 20250901-netpoll_memleak-90d0d4bc772c Best regards, -- Breno Leitao <leitao(a)debian.org>

1 week, 4 days

2
1
0 0

+ compiler-clangh-define-__sanitize___-macros-only-when-undefined.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: compiler-clang.h: define __SANITIZE_*__ macros only when undefined has been added to the -mm mm-hotfixes-unstable branch. Its filename is compiler-clangh-define-__sanitize___-macros-only-when-undefined.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Nathan Chancellor <nathan(a)kernel.org> Subject: compiler-clang.h: define __SANITIZE_*__ macros only when undefined Date: Tue, 02 Sep 2025 15:49:26 -0700 Clang 22 recently added support for defining __SANITIZE__ macros similar to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e) with the existing defines that the kernel creates to emulate this behavior with existing clang versions. In file included from <built-in>:3: In file included from include/linux/compiler_types.h:171: include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined] 37 | #define __SANITIZE_THREAD__ | ^ <built-in>:352:9: note: previous definition is here 352 | #define __SANITIZE_THREAD__ 1 | ^ Refactor compiler-clang.h to only define the sanitizer macros when they are undefined and adjust the rest of the code to use these macros for checking if the sanitizers are enabled, clearing up the warnings and allowing the kernel to easily drop these defines when the minimum supported version of LLVM for building the kernel becomes 22.0.0 or newer. Link: https://lkml.kernel.org/r/20250902-clang-update-sanitize-defines-v1-1-cf370… Link: https://github.com/llvm/llvm-project/commit/568c23bbd3303518c5056d7f03444da… [1] Signed-off-by: Nathan Chancellor <nathan(a)kernel.org> Reviewed-by: Justin Stitt <justinstitt(a)google.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Konovalov <andreyknvl(a)gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a(a)gmail.com> Cc: Bill Wendling <morbo(a)google.com> Cc: Dmitriy Vyukov <dvyukov(a)google.com> Cc: Marco Elver <elver(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- include/linux/compiler-clang.h | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) --- a/include/linux/compiler-clang.h~compiler-clangh-define-__sanitize___-macros-only-when-undefined +++ a/include/linux/compiler-clang.h @@ -18,23 +18,42 @@ #define KASAN_ABI_VERSION 5 /* + * Clang 22 added preprocessor macros to match GCC, in hopes of eventually + * dropping __has_feature support for sanitizers: + * https://github.com/llvm/llvm-project/commit/568c23bbd3303518c5056d7f03444da… + * Create these macros for older versions of clang so that it is easy to clean + * up once the minimum supported version of LLVM for building the kernel always + * creates these macros. + * * Note: Checking __has_feature(*_sanitizer) is only true if the feature is * enabled. Therefore it is not required to additionally check defined(CONFIG_*) * to avoid adding redundant attributes in other configurations. */ +#if __has_feature(address_sanitizer) && !defined(__SANITIZE_ADDRESS__) +#define __SANITIZE_ADDRESS__ +#endif +#if __has_feature(hwaddress_sanitizer) && !defined(__SANITIZE_HWADDRESS__) +#define __SANITIZE_HWADDRESS__ +#endif +#if __has_feature(thread_sanitizer) && !defined(__SANITIZE_THREAD__) +#define __SANITIZE_THREAD__ +#endif -#if __has_feature(address_sanitizer) || __has_feature(hwaddress_sanitizer) -/* Emulate GCC's __SANITIZE_ADDRESS__ flag */ +/* + * Treat __SANITIZE_HWADDRESS__ the same as __SANITIZE_ADDRESS__ in the kernel. + */ +#ifdef __SANITIZE_HWADDRESS__ #define __SANITIZE_ADDRESS__ +#endif + +#ifdef __SANITIZE_ADDRESS__ #define __no_sanitize_address \ __attribute__((no_sanitize("address", "hwaddress"))) #else #define __no_sanitize_address #endif -#if __has_feature(thread_sanitizer) -/* emulate gcc's __SANITIZE_THREAD__ flag */ -#define __SANITIZE_THREAD__ +#ifdef __SANITIZE_THREAD__ #define __no_sanitize_thread \ __attribute__((no_sanitize("thread"))) #else _ Patches currently in -mm which might be from nathan(a)kernel.org are compiler-clangh-define-__sanitize___-macros-only-when-undefined.patch mm-rmap-convert-enum-rmap_level-to-enum-pgtable_level-fix.patch

1 week, 4 days

1
0
0 0

[PATCH net 8/8] e1000e: fix heap overflow in e1000_set_eeprom

by Tony Nguyen

From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Fix a possible heap overflow in e1000_set_eeprom function by adding input validation for the requested length of the change in the EEPROM. In addition, change the variable type from int to size_t for better code practices and rearrange declarations to RCT. Cc: stable(a)vger.kernel.org Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Co-developed-by: Mikael Wessel <post(a)mikaelkw.online> Signed-off-by: Mikael Wessel <post(a)mikaelkw.online> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> --- drivers/net/ethernet/intel/e1000e/ethtool.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index c0bbb12eed2e..cf01a108a5bb 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -549,12 +549,12 @@ static int e1000_set_eeprom(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + size_t total_len, max_len; u16 *eeprom_buff; - void *ptr; - int max_len; + int ret_val = 0; int first_word; int last_word; - int ret_val = 0; + void *ptr; u16 i; if (eeprom->len == 0) @@ -569,6 +569,10 @@ static int e1000_set_eeprom(struct net_device *netdev, max_len = hw->nvm.word_size * 2; + if (check_add_overflow(eeprom->offset, eeprom->len, &total_len) || + total_len > max_len) + return -EFBIG; + first_word = eeprom->offset >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1; eeprom_buff = kmalloc(max_len, GFP_KERNEL); -- 2.47.1

1 week, 4 days

1
0
0 0

[PATCH] compiler-clang.h: Define __SANITIZE_*__ macros only when undefined

by Nathan Chancellor

Clang 22 recently added support for defining __SANITIZE__ macros similar to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e) with the existing defines that the kernel creates to emulate this behavior with existing clang versions. In file included from <built-in>:3: In file included from include/linux/compiler_types.h:171: include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined] 37 | #define __SANITIZE_THREAD__ | ^ <built-in>:352:9: note: previous definition is here 352 | #define __SANITIZE_THREAD__ 1 | ^ Refactor compiler-clang.h to only define the sanitizer macros when they are undefined and adjust the rest of the code to use these macros for checking if the sanitizers are enabled, clearing up the warnings and allowing the kernel to easily drop these defines when the minimum supported version of LLVM for building the kernel becomes 22.0.0 or newer. Cc: stable(a)vger.kernel.org Link: https://github.com/llvm/llvm-project/commit/568c23bbd3303518c5056d7f03444da… [1] Signed-off-by: Nathan Chancellor <nathan(a)kernel.org> --- Andrew, would it be possible to take this via mm-hotfixes? --- include/linux/compiler-clang.h | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index fa4ffe037bc7..8720a0705900 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -18,23 +18,42 @@ #define KASAN_ABI_VERSION 5 /* + * Clang 22 added preprocessor macros to match GCC, in hopes of eventually + * dropping __has_feature support for sanitizers: + * https://github.com/llvm/llvm-project/commit/568c23bbd3303518c5056d7f03444da… + * Create these macros for older versions of clang so that it is easy to clean + * up once the minimum supported version of LLVM for building the kernel always + * creates these macros. + * * Note: Checking __has_feature(*_sanitizer) is only true if the feature is * enabled. Therefore it is not required to additionally check defined(CONFIG_*) * to avoid adding redundant attributes in other configurations. */ +#if __has_feature(address_sanitizer) && !defined(__SANITIZE_ADDRESS__) +#define __SANITIZE_ADDRESS__ +#endif +#if __has_feature(hwaddress_sanitizer) && !defined(__SANITIZE_HWADDRESS__) +#define __SANITIZE_HWADDRESS__ +#endif +#if __has_feature(thread_sanitizer) && !defined(__SANITIZE_THREAD__) +#define __SANITIZE_THREAD__ +#endif -#if __has_feature(address_sanitizer) || __has_feature(hwaddress_sanitizer) -/* Emulate GCC's __SANITIZE_ADDRESS__ flag */ +/* + * Treat __SANITIZE_HWADDRESS__ the same as __SANITIZE_ADDRESS__ in the kernel. + */ +#ifdef __SANITIZE_HWADDRESS__ #define __SANITIZE_ADDRESS__ +#endif + +#ifdef __SANITIZE_ADDRESS__ #define __no_sanitize_address \ __attribute__((no_sanitize("address", "hwaddress"))) #else #define __no_sanitize_address #endif -#if __has_feature(thread_sanitizer) -/* emulate gcc's __SANITIZE_THREAD__ flag */ -#define __SANITIZE_THREAD__ +#ifdef __SANITIZE_THREAD__ #define __no_sanitize_thread \ __attribute__((no_sanitize("thread"))) #else --- base-commit: b320789d6883cc00ac78ce83bccbfe7ed58afcf0 change-id: 20250902-clang-update-sanitize-defines-845000c29d2c Best regards, -- Nathan Chancellor <nathan(a)kernel.org>

1 week, 4 days

2
1
0 0

[PATCHSET] xfs: improve online repair reap calculations

by Darrick J. Wong

Hi all, A few months ago, the multi-fsblock untorn writes patchset added a bunch of log intent item helper functions to estimate the number of intent items that could be added to a particular transaction. Those helpers enabled us to compute a safe upper bound on the number of blocks that could be written in an untorn fashion with filesystem-provided out of place writes. Currently, the online fsck code employs static limits on the number of intent items that it's willing to accrue to a single transaction when it's trying to reap what it thinks are the old blocks from a corrupt structure. There have been no problems reported with this approach after years of testing, but static limits are scary and gross because overestimating the intent item limit could result in transaction overflows and dead filesystems; and underestimating causes unnecessary overhead. This series uses the new log intent item size helpers to estimate the limits dynamically based on worst-case per-block repair work vs. the size of the scrub transaction. After several months of testing this, there don't seem to be any problems here either. If you're going to start using this code, I strongly recommend pulling from my git trees, which are linked below. This has been running on the djcloud for months with no problems. Enjoy! Comments and questions are, as always, welcome. --D kernel git tree: https://git.kernel.org/cgit/linux/kernel/git/djwong/xfs-linux.git/log/?h=fi… --- Commits in this patchset: * xfs: prepare reaping code for dynamic limits * xfs: convert the ifork reap code to use xreap_state * xfs: use deferred intent items for reaping crosslinked blocks * xfs: compute per-AG extent reap limits dynamically * xfs: compute data device CoW staging extent reap limits dynamically * xfs: compute realtime device CoW staging extent reap limits dynamically * xfs: compute file mapping reap limits dynamically * xfs: remove static reap limits * xfs: use deferred reaping for data device cow extents --- fs/xfs/scrub/repair.h | 8 - fs/xfs/scrub/trace.h | 45 ++++ fs/xfs/scrub/newbt.c | 7 + fs/xfs/scrub/reap.c | 622 +++++++++++++++++++++++++++++++++++++++---------- fs/xfs/scrub/trace.c | 1 5 files changed, 552 insertions(+), 131 deletions(-)

1 week, 4 days

2
3
0 0

[PATCH 2/4] fuse: fix possibly missing fuse_copy_finish() call in fuse_notify()

by Miklos Szeredi

In case of FUSE_NOTIFY_RESEND and FUSE_NOTIFY_INC_EPOCH fuse_copy_finish() isn't called. Fix by always calling fuse_copy_finish() after fuse_notify(). It's a no-op if called a second time. Fixes: 760eac73f9f6 ("fuse: Introduce a new notification type for resend pending requests") Fixes: 2396356a945b ("fuse: add more control over cache invalidation behaviour") Cc: <stable(a)vger.kernel.org> # v6.9 Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> --- fs/fuse/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index df793003eb0c..85d05a5e40e9 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -2178,7 +2178,7 @@ static ssize_t fuse_dev_do_write(struct fuse_dev *fud, */ if (!oh.unique) { err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), cs); - goto out; + goto copy_finish; } err = -EINVAL; -- 2.49.0

1 week, 4 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror