- Linux-stable-mirror - lists.linaro.org

[PATCH] thunderbolt: Fix wake on connect at runtime

by Mario Limonciello

From: Mario Limonciello <mario.limonciello(a)amd.com> commit 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") fixated on the USB4 port sysfs wakeup file not working properly to control policy, but it had an unintended side effect that the sysfs file controls policy both at runtime and at suspend time. The sysfs file is supposed to only control behavior while system is suspended. Pass whether programming a port for runtime into usb4_switch_set_wake() and if runtime then ignore the value in the sysfs file. Cc: stable(a)vger.kernel.org Reported-by: Alexander Kovacs <Alexander.Kovacs(a)amd.com> Tested-by: Alexander Kovacs <Alexander.Kovacs(a)amd.com> Fixes: 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com> --- drivers/thunderbolt/switch.c | 8 ++++---- drivers/thunderbolt/tb.h | 2 +- drivers/thunderbolt/usb4.c | 9 ++++----- 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 28febb95f8fa1..e9809fb57c354 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -3437,7 +3437,7 @@ void tb_sw_set_unplugged(struct tb_switch *sw) } } -static int tb_switch_set_wake(struct tb_switch *sw, unsigned int flags) +static int tb_switch_set_wake(struct tb_switch *sw, unsigned int flags, bool runtime) { if (flags) tb_sw_dbg(sw, "enabling wakeup: %#x\n", flags); @@ -3445,7 +3445,7 @@ static int tb_switch_set_wake(struct tb_switch *sw, unsigned int flags) tb_sw_dbg(sw, "disabling wakeup\n"); if (tb_switch_is_usb4(sw)) - return usb4_switch_set_wake(sw, flags); + return usb4_switch_set_wake(sw, flags, runtime); return tb_lc_set_wake(sw, flags); } @@ -3521,7 +3521,7 @@ int tb_switch_resume(struct tb_switch *sw, bool runtime) tb_switch_check_wakes(sw); /* Disable wakes */ - tb_switch_set_wake(sw, 0); + tb_switch_set_wake(sw, 0, true); err = tb_switch_tmu_init(sw); if (err) @@ -3603,7 +3603,7 @@ void tb_switch_suspend(struct tb_switch *sw, bool runtime) flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE; } - tb_switch_set_wake(sw, flags); + tb_switch_set_wake(sw, flags, runtime); if (tb_switch_is_usb4(sw)) usb4_switch_set_sleep(sw); diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index 87afd5a7c504b..f503bad864130 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -1317,7 +1317,7 @@ int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid); int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf, size_t size); bool usb4_switch_lane_bonding_possible(struct tb_switch *sw); -int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags); +int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags, bool runtime); int usb4_switch_set_sleep(struct tb_switch *sw); int usb4_switch_nvm_sector_size(struct tb_switch *sw); int usb4_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf, diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index fce3c0f2354a7..e7d8cf0c1da1b 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -406,7 +406,7 @@ bool usb4_switch_lane_bonding_possible(struct tb_switch *sw) * * Enables/disables router to wake up from sleep. */ -int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags) +int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags, bool runtime) { struct usb4_port *usb4; struct tb_port *port; @@ -438,13 +438,12 @@ int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags) val |= PORT_CS_19_WOU4; } else { bool configured = val & PORT_CS_19_PC; + bool wakeup = runtime || device_may_wakeup(&usb4->dev); usb4 = port->usb4; - if (((flags & TB_WAKE_ON_CONNECT) && - device_may_wakeup(&usb4->dev)) && !configured) + if ((flags & TB_WAKE_ON_CONNECT) && wakeup && !configured) val |= PORT_CS_19_WOC; - if (((flags & TB_WAKE_ON_DISCONNECT) && - device_may_wakeup(&usb4->dev)) && configured) + if ((flags & TB_WAKE_ON_DISCONNECT) && wakeup && configured) val |= PORT_CS_19_WOD; if ((flags & TB_WAKE_ON_USB4) && configured) val |= PORT_CS_19_WOU4; -- 2.43.0

2 weeks, 3 days

2
1
0 0

[PATCH v2] usb: cdnsp: Fix issue with CV Bad Descriptor test

by Pawel Laszczak

The SSP2 controller has extra endpoint state preserve bit (ESP) which setting causes that endpoint state will be preserved during Halt Endpoint command. It is used only for EP0. Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test" failed. Setting this bit doesn't have any impact for SSP controller. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable(a)vger.kernel.org Signed-off-by: Pawel Laszczak <pawell(a)cadence.com> --- Changelog: v2: - removed some typos - added pep variable initialization - updated TRB_ESP description drivers/usb/cdns3/cdnsp-debug.h | 5 +++-- drivers/usb/cdns3/cdnsp-ep0.c | 19 ++++++++++++++++--- drivers/usb/cdns3/cdnsp-gadget.h | 6 ++++++ drivers/usb/cdns3/cdnsp-ring.c | 3 ++- 4 files changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h index cd138acdcce1..86860686d836 100644 --- a/drivers/usb/cdns3/cdnsp-debug.h +++ b/drivers/usb/cdns3/cdnsp-debug.h @@ -327,12 +327,13 @@ static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0, case TRB_RESET_EP: case TRB_HALT_ENDPOINT: ret = scnprintf(str, size, - "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c", + "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c %c", cdnsp_trb_type_string(type), ep_num, ep_id % 2 ? "out" : "in", TRB_TO_EP_INDEX(field3), field1, field0, TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + field3 & TRB_CYCLE ? 'C' : 'c', + field3 & TRB_ESP ? 'P' : 'p'); break; case TRB_STOP_RING: ret = scnprintf(str, size, diff --git a/drivers/usb/cdns3/cdnsp-ep0.c b/drivers/usb/cdns3/cdnsp-ep0.c index f317d3c84781..9280a7b97e20 100644 --- a/drivers/usb/cdns3/cdnsp-ep0.c +++ b/drivers/usb/cdns3/cdnsp-ep0.c @@ -414,6 +414,7 @@ static int cdnsp_ep0_std_request(struct cdnsp_device *pdev, void cdnsp_setup_analyze(struct cdnsp_device *pdev) { struct usb_ctrlrequest *ctrl = &pdev->setup; + struct cdnsp_ep *pep; int ret = -EINVAL; u16 len; @@ -427,10 +428,22 @@ void cdnsp_setup_analyze(struct cdnsp_device *pdev) goto out; } + pep = &pdev->eps[0]; + /* Restore the ep0 to Stopped/Running state. */ - if (pdev->eps[0].ep_state & EP_HALTED) { - trace_cdnsp_ep0_halted("Restore to normal state"); - cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0); + if (pep->ep_state & EP_HALTED) { + /* + * Halt Endpoint Command for SSP2 for ep0 preserve current + * endpoint state and driver has to synchronize the + * software endpoint state with endpoint output context + * state. + */ + if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_HALTED) { + cdnsp_halt_endpoint(pdev, pep, 0); + } else { + pep->ep_state &= ~EP_HALTED; + pep->ep_state |= EP_STOPPED; + } } /* diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h index 2afa3e558f85..b1665f9e9ee5 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.h +++ b/drivers/usb/cdns3/cdnsp-gadget.h @@ -987,6 +987,12 @@ enum cdnsp_setup_dev { #define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16)) #define SCT_FOR_TRB(p) (((p) << 1) & 0x7) +/* + * Halt Endpoint Command TRB field. + * The ESP bit only exists in the SSP2 controller. + */ +#define TRB_ESP BIT(9) + /* Link TRB specific fields. */ #define TRB_TC BIT(1) diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index fd06cb85c4ea..d397d28efc6e 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -2483,7 +2483,8 @@ void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index) { cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_HALT_ENDPOINT) | SLOT_ID_FOR_TRB(pdev->slot_id) | - EP_ID_FOR_TRB(ep_index)); + EP_ID_FOR_TRB(ep_index) | + (!ep_index ? TRB_ESP : 0)); } void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num) -- 2.43.0

2 weeks, 3 days

2
1
0 0

[PATCH v1] mm/gup: Revert "mm: gup: fix infinite loop within __get_longterm_locked"

by David Hildenbrand

After commit 1aaf8c122918 ("mm: gup: fix infinite loop within __get_longterm_locked") we are able to longterm pin folios that are not supposed to get longterm pinned, simply because they temporarily have the LRU flag cleared (esp. temporarily isolated). For example, two __get_longterm_locked() callers can race, or __get_longterm_locked() can race with anything else that temporarily isolates folios. The introducing commit mentions the use case of a driver that uses vm_ops->fault to insert pages allocated through cma_alloc() into the page tables, assuming they can later get longterm pinned. These pages/ folios would never have the LRU flag set and consequently cannot get isolated. There is no known in-tree user making use of that so far, fortunately. To handle that in the future -- and avoid retrying forever to isolate/migrate them -- we will need a different mechanism for the CMA area *owner* to indicate that it actually already allocated the page and is fine with longterm pinning it. The LRU flag is not suitable for that. Probably we can lookup the relevant CMA area and query the bitmap; we only have have to care about some races, probably. If already allocated, we could just allow longterm pinning) Anyhow, let's fix the "must not be longterm pinned" problem first by reverting the original commit. Fixes: 1aaf8c122918 ("mm: gup: fix infinite loop within __get_longterm_locked") Closes: https://lore.kernel.org/all/20250522092755.GA3277597@tiffany/ Reported-by: Hyesoo Yu <hyesoo.yu(a)samsung.com> Cc: <Stable(a)vger.kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Peter Xu <peterx(a)redhat.com> Cc: Zhaoyang Huang <zhaoyang.huang(a)unisoc.com> Cc: Aijun Sun <aijun.sun(a)unisoc.com> Cc: Alistair Popple <apopple(a)nvidia.com> Cc: John Hubbard <jhubbard(a)nvidia.com> Signed-off-by: David Hildenbrand <david(a)redhat.com> --- mm/gup.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/mm/gup.c b/mm/gup.c index e065a49842a87..3c39cbbeebef1 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -2303,13 +2303,13 @@ static void pofs_unpin(struct pages_or_folios *pofs) /* * Returns the number of collected folios. Return value is always >= 0. */ -static void collect_longterm_unpinnable_folios( +static unsigned long collect_longterm_unpinnable_folios( struct list_head *movable_folio_list, struct pages_or_folios *pofs) { + unsigned long i, collected = 0; struct folio *prev_folio = NULL; bool drain_allow = true; - unsigned long i; for (i = 0; i < pofs->nr_entries; i++) { struct folio *folio = pofs_get_folio(pofs, i); @@ -2321,6 +2321,8 @@ static void collect_longterm_unpinnable_folios( if (folio_is_longterm_pinnable(folio)) continue; + collected++; + if (folio_is_device_coherent(folio)) continue; @@ -2342,6 +2344,8 @@ static void collect_longterm_unpinnable_folios( NR_ISOLATED_ANON + folio_is_file_lru(folio), folio_nr_pages(folio)); } + + return collected; } /* @@ -2418,9 +2422,11 @@ static long check_and_migrate_movable_pages_or_folios(struct pages_or_folios *pofs) { LIST_HEAD(movable_folio_list); + unsigned long collected; - collect_longterm_unpinnable_folios(&movable_folio_list, pofs); - if (list_empty(&movable_folio_list)) + collected = collect_longterm_unpinnable_folios(&movable_folio_list, + pofs); + if (!collected) return 0; return migrate_longterm_unpinnable_folios(&movable_folio_list, pofs); -- 2.49.0

2 weeks, 3 days

2
1
0 0

[PATCH 1/1] usb: cdnsp: do not disable slot for disabled slot

by Peter Chen

It doesn't need to do it, and the related command event returns 'Slot Not Enabled Error' status. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable(a)vger.kernel.org Suggested-by: Hongliang Yang <hongliang.yang(a)cixtech.com> Reviewed-by: Fugang Duan <fugang.duan(a)cixtech.com> Signed-off-by: Peter Chen <peter.chen(a)cixtech.com> --- drivers/usb/cdns3/cdnsp-ring.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index fd06cb85c4ea..757fdd918286 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -772,7 +772,9 @@ static int cdnsp_update_port_id(struct cdnsp_device *pdev, u32 port_id) } if (port_id != old_port) { - cdnsp_disable_slot(pdev); + if (pdev->slot_id) + cdnsp_disable_slot(pdev); + pdev->active_port = port; cdnsp_enable_slot(pdev); } -- 2.25.1

2 weeks, 3 days

1
0
0 0

[PATCH v3] xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS

by xiehongyu1＠kylinos.cn

From: Hongyu Xie <xiehongyu1(a)kylinos.cn> Disable stream for platform xHC controller with broken stream. Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable") Cc: stable(a)vger.kernel.org # 5.4 Signed-off-by: Hongyu Xie <xiehongyu1(a)kylinos.cn> --- v3: add changelog information v2: add Fixes information and cc 5.4 lts drivers/usb/host/xhci-plat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 6dab142e72789..c79d5ed48a08b 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -328,7 +328,8 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s } usb3_hcd = xhci_get_usb3_hcd(xhci); - if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) usb3_hcd->can_do_streams = 1; if (xhci->shared_hcd) { -- 2.25.1

2 weeks, 3 days

1
0
0 0

[PATCH v3] usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach

by RD Babiera

This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS. tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer. Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail. Turn VBUS on before tcpm_set_roles to meet timing requirement. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable(a)vger.kernel.org Signed-off-by: RD Babiera <rdbabiera(a)google.com> Reviewed-by: Badhri Jagan Sridharan <badhri(a)google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> --- Changes since v1: * Rebased on top of usb-linus for v6.15 Changes since v2: * Restored to v1, usb-next and usb-linus are both synced to v6.16 so there is no longer a version mismatch possibility. --- drivers/usb/typec/tcpm/tcpm.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 1a1f9e1f8e4e..1f6fdfaa34bf 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4410,17 +4410,6 @@ static int tcpm_src_attach(struct tcpm_port *port) tcpm_enable_auto_vbus_discharge(port, true); - ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, - TYPEC_SOURCE, tcpm_data_role_for_source(port)); - if (ret < 0) - return ret; - - if (port->pd_supported) { - ret = port->tcpc->set_pd_rx(port->tcpc, true); - if (ret < 0) - goto out_disable_mux; - } - /* * USB Type-C specification, version 1.2, * chapter 4.5.2.2.8.1 (Attached.SRC Requirements) @@ -4430,13 +4419,24 @@ static int tcpm_src_attach(struct tcpm_port *port) (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) { ret = tcpm_set_vconn(port, true); if (ret < 0) - goto out_disable_pd; + return ret; } ret = tcpm_set_vbus(port, true); if (ret < 0) goto out_disable_vconn; + ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, TYPEC_SOURCE, + tcpm_data_role_for_source(port)); + if (ret < 0) + goto out_disable_vbus; + + if (port->pd_supported) { + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) + goto out_disable_mux; + } + port->pd_capable = false; port->partner = NULL; @@ -4447,14 +4447,14 @@ static int tcpm_src_attach(struct tcpm_port *port) return 0; -out_disable_vconn: - tcpm_set_vconn(port, false); -out_disable_pd: - if (port->pd_supported) - port->tcpc->set_pd_rx(port->tcpc, false); out_disable_mux: tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, TYPEC_ORIENTATION_NONE); +out_disable_vbus: + tcpm_set_vbus(port, false); +out_disable_vconn: + tcpm_set_vconn(port, false); + return ret; } base-commit: e04c78d86a9699d136910cfc0bdcf01087e3267e -- 2.50.0.rc2.701.gf1e915cc24-goog

2 weeks, 3 days

1
0
0 0

[PATCH v3 0/2] x86/traps: Fix DR6/DR7 initialization

by Xin Li (Intel)

Sohil reported seeing a split lock warning when running a test that generates userspace #DB: x86/split lock detection: #DB: sigtrap_loop_64/4614 took a bus_lock trap at address: 0x4011ae We investigated the issue and figured out: 1) The warning is a false positive. 2) It is not caused by the test itself. 3) It occurs even when Bus Lock Detection (BLD) is disabled. 4) It only happens on the first #DB on a CPU. And the root cause is, at boot time, Linux zeros DR6. This leads to different DR6 values depending on whether the CPU supports BLD: 1) On CPUs with BLD support, DR6 becomes 0xFFFF07F0 (bit 11, DR6.BLD, is cleared). 2) On CPUs without BLD, DR6 becomes 0xFFFF0FF0. Since only BLD-induced #DB exceptions clear DR6.BLD and other debug exceptions leave it unchanged, even if the first #DB is unrelated to BLD, DR6.BLD is still cleared. As a result, such a first #DB is misinterpreted as a BLD #DB, and a false warning is triggerred. Fix the bug by initializing DR6 by writing its architectural reset value at boot time. DR7 suffers from a similar issue, apply the same fix. This patch set is based on tip/x86/urgent branch as of today. Link to the previous patch set v2: https://lore.kernel.org/lkml/20250617073234.1020644-1-xin@zytor.com/ Changes in v3: *) Polish initialize_debug_regs() (PeterZ). *) Rewrite the comment for DR6_RESERVED definition (Sohil and Sean). *) Reword the patch 2's changelog using Sean's description. *) Explain the definition of DR7_FIXED_1 (Sohil). *) Collect TB, RB, AB (PeterZ, Sohil and Sean). Xin Li (Intel) (2): x86/traps: Initialize DR6 by writing its architectural reset value x86/traps: Initialize DR7 by writing its architectural reset value arch/x86/include/asm/debugreg.h | 19 ++++++++++++---- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/include/uapi/asm/debugreg.h | 21 ++++++++++++++++- arch/x86/kernel/cpu/common.c | 24 ++++++++------------ arch/x86/kernel/kgdb.c | 2 +- arch/x86/kernel/process_32.c | 2 +- arch/x86/kernel/process_64.c | 2 +- arch/x86/kernel/traps.c | 34 +++++++++++++++++----------- arch/x86/kvm/x86.c | 4 ++-- 9 files changed, 72 insertions(+), 38 deletions(-) base-commit: 2aebf5ee43bf0ed225a09a30cf515d9f2813b759 -- 2.49.0

2 weeks, 3 days

2
3
0 0

[PATCH AUTOSEL 6.15 001/110] drm/amd/display: disable DPP RCG before DPP CLK enable

by Sasha Levin

From: Charlene Liu <Charlene.Liu(a)amd.com> [ Upstream commit 1bcd679209420305a86833bc357d50021909edaf ] [why] DPP CLK enable needs to disable DPPCLK RCG first. The DPPCLK_en in dccg should always be enabled when the corresponding pipe is enabled. Reviewed-by: Hansen Dsouza <hansen.dsouza(a)amd.com> Signed-off-by: Charlene Liu <Charlene.Liu(a)amd.com> Signed-off-by: Ray Wu <ray.wu(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Based on my analysis of both the commit message and code changes, my answer is: **YES** This commit should be backported to stable kernel trees for the following reasons: ## Critical Hardware Sequencing Fix The commit addresses a fundamental hardware sequencing requirement where DPP (Display Pipes and Planes) Root Clock Gating (RCG) must be disabled before enabling the DPP clock. This is a critical timing constraint that, if violated, can cause severe system issues. ## Specific Code Evidence 1. **In `dccg35_update_dpp_dto()`**, the fix adds a crucial sequencing step: ```c + dccg35_set_dppclk_rcg(dccg, dpp_inst, false); REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0, DPPCLK0_DTO_PHASE, phase, DPPCLK0_DTO_MODULO, modulo); dcn35_set_dppclk_enable(dccg, dpp_inst, true); ``` This ensures RCG is disabled (false) before enabling the DPP clock. 2. **In `dcn35_enable_plane()`**, explicit clock control is added: ```c + /*make sure DPPCLK is on*/ + dccg->funcs->dccg_root_gate_disable_control(dccg, dpp->inst, true); + dpp->funcs->dpp_dppclk_control(dpp, false, true); ``` 3. **Removal of problematic init code** in `dcn35_init_hw()`: ```c - if (res_pool->dccg->funcs->dccg_root_gate_disable_control) { - for (i = 0; i < res_pool->pipe_count; i++) - res_pool->dccg->funcs->dccg_root_gate_disable_control(res_pool->dccg, i, 0); - } ``` ## Similarity to Previous Critical Fixes This commit follows the pattern of Similar Commit #1, which also addressed clock gating sequencing issues that could cause system hangs. The commit message explicitly states this is needed because "DPP CLK enable needs to disable DPPCLK RCG first." ## Impact and Risk Assessment - **Bug Fixed**: Incorrect clock sequencing that can cause system instability - **Scope**: Limited to DCN35 display hardware (recent AMD GPUs) - **Complexity**: Small, focused changes with clear purpose - **Risk**: Low risk of regression - adds proper sequencing without major architectural changes This fix meets all criteria for stable backporting: - Fixes a real bug affecting users (system stability) - Small and contained changes - No new features or architectural changes - Addresses hardware constraints that cannot be worked around The commit should be backported to all stable kernels that include DCN35 display support to ensure proper display functionality and system stability for users with affected AMD GPUs. .../amd/display/dc/dccg/dcn35/dcn35_dccg.c | 38 ++++++++++++------- .../amd/display/dc/hwss/dcn35/dcn35_hwseq.c | 21 ++++++---- 2 files changed, 38 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c b/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c index b363f5360818d..ad910065f463f 100644 --- a/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c +++ b/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c @@ -391,6 +391,7 @@ static void dccg35_set_dppclk_rcg(struct dccg *dccg, struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg); + if (!dccg->ctx->dc->debug.root_clock_optimization.bits.dpp && enable) return; @@ -411,6 +412,8 @@ static void dccg35_set_dppclk_rcg(struct dccg *dccg, BREAK_TO_DEBUGGER(); break; } + //DC_LOG_DEBUG("%s: inst(%d) DPPCLK rcg_disable: %d\n", __func__, inst, enable ? 0 : 1); + } static void dccg35_set_dpstreamclk_rcg( @@ -1112,30 +1115,24 @@ static void dcn35_set_dppclk_enable(struct dccg *dccg, { struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg); + switch (dpp_inst) { case 0: REG_UPDATE(DPPCLK_CTRL, DPPCLK0_EN, enable); - if (dccg->ctx->dc->debug.root_clock_optimization.bits.dpp) - REG_UPDATE(DCCG_GATE_DISABLE_CNTL6, DPPCLK0_ROOT_GATE_DISABLE, enable); break; case 1: REG_UPDATE(DPPCLK_CTRL, DPPCLK1_EN, enable); - if (dccg->ctx->dc->debug.root_clock_optimization.bits.dpp) - REG_UPDATE(DCCG_GATE_DISABLE_CNTL6, DPPCLK1_ROOT_GATE_DISABLE, enable); break; case 2: REG_UPDATE(DPPCLK_CTRL, DPPCLK2_EN, enable); - if (dccg->ctx->dc->debug.root_clock_optimization.bits.dpp) - REG_UPDATE(DCCG_GATE_DISABLE_CNTL6, DPPCLK2_ROOT_GATE_DISABLE, enable); break; case 3: REG_UPDATE(DPPCLK_CTRL, DPPCLK3_EN, enable); - if (dccg->ctx->dc->debug.root_clock_optimization.bits.dpp) - REG_UPDATE(DCCG_GATE_DISABLE_CNTL6, DPPCLK3_ROOT_GATE_DISABLE, enable); break; default: break; } + //DC_LOG_DEBUG("%s: dpp_inst(%d) DPPCLK_EN = %d\n", __func__, dpp_inst, enable); } @@ -1163,14 +1160,18 @@ static void dccg35_update_dpp_dto(struct dccg *dccg, int dpp_inst, ASSERT(false); phase = 0xff; } + dccg35_set_dppclk_rcg(dccg, dpp_inst, false); REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0, DPPCLK0_DTO_PHASE, phase, DPPCLK0_DTO_MODULO, modulo); dcn35_set_dppclk_enable(dccg, dpp_inst, true); - } else + } else { dcn35_set_dppclk_enable(dccg, dpp_inst, false); + /*we have this in hwss: disable_plane*/ + //dccg35_set_dppclk_rcg(dccg, dpp_inst, true); + } dccg->pipe_dppclk_khz[dpp_inst] = req_dppclk; } @@ -1182,6 +1183,7 @@ static void dccg35_set_dppclk_root_clock_gating(struct dccg *dccg, if (!dccg->ctx->dc->debug.root_clock_optimization.bits.dpp) return; + switch (dpp_inst) { case 0: REG_UPDATE(DCCG_GATE_DISABLE_CNTL6, DPPCLK0_ROOT_GATE_DISABLE, enable); @@ -1198,6 +1200,8 @@ static void dccg35_set_dppclk_root_clock_gating(struct dccg *dccg, default: break; } + //DC_LOG_DEBUG("%s: dpp_inst(%d) rcg: %d\n", __func__, dpp_inst, enable); + } static void dccg35_get_pixel_rate_div( @@ -1521,28 +1525,30 @@ static void dccg35_set_physymclk_root_clock_gating( switch (phy_inst) { case 0: REG_UPDATE(DCCG_GATE_DISABLE_CNTL2, - PHYASYMCLK_ROOT_GATE_DISABLE, enable ? 1 : 0); + PHYASYMCLK_ROOT_GATE_DISABLE, enable ? 0 : 1); break; case 1: REG_UPDATE(DCCG_GATE_DISABLE_CNTL2, - PHYBSYMCLK_ROOT_GATE_DISABLE, enable ? 1 : 0); + PHYBSYMCLK_ROOT_GATE_DISABLE, enable ? 0 : 1); break; case 2: REG_UPDATE(DCCG_GATE_DISABLE_CNTL2, - PHYCSYMCLK_ROOT_GATE_DISABLE, enable ? 1 : 0); + PHYCSYMCLK_ROOT_GATE_DISABLE, enable ? 0 : 1); break; case 3: REG_UPDATE(DCCG_GATE_DISABLE_CNTL2, - PHYDSYMCLK_ROOT_GATE_DISABLE, enable ? 1 : 0); + PHYDSYMCLK_ROOT_GATE_DISABLE, enable ? 0 : 1); break; case 4: REG_UPDATE(DCCG_GATE_DISABLE_CNTL2, - PHYESYMCLK_ROOT_GATE_DISABLE, enable ? 1 : 0); + PHYESYMCLK_ROOT_GATE_DISABLE, enable ? 0 : 1); break; default: BREAK_TO_DEBUGGER(); return; } + //DC_LOG_DEBUG("%s: dpp_inst(%d) PHYESYMCLK_ROOT_GATE_DISABLE:\n", __func__, phy_inst, enable ? 0 : 1); + } static void dccg35_set_physymclk( @@ -1643,6 +1649,8 @@ static void dccg35_dpp_root_clock_control( return; if (clock_on) { + dccg35_set_dppclk_rcg(dccg, dpp_inst, false); + /* turn off the DTO and leave phase/modulo at max */ dcn35_set_dppclk_enable(dccg, dpp_inst, 1); REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0, @@ -1654,6 +1662,8 @@ static void dccg35_dpp_root_clock_control( REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0, DPPCLK0_DTO_PHASE, 0, DPPCLK0_DTO_MODULO, 1); + /*we have this in hwss: disable_plane*/ + //dccg35_set_dppclk_rcg(dccg, dpp_inst, true); } dccg->dpp_clock_gated[dpp_inst] = !clock_on; diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c index 922b8d71cf1aa..63077c1fad859 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c @@ -241,11 +241,6 @@ void dcn35_init_hw(struct dc *dc) dc->res_pool->hubbub->funcs->allow_self_refresh_control(dc->res_pool->hubbub, !dc->res_pool->hubbub->ctx->dc->debug.disable_stutter); } - if (res_pool->dccg->funcs->dccg_root_gate_disable_control) { - for (i = 0; i < res_pool->pipe_count; i++) - res_pool->dccg->funcs->dccg_root_gate_disable_control(res_pool->dccg, i, 0); - } - for (i = 0; i < res_pool->audio_count; i++) { struct audio *audio = res_pool->audios[i]; @@ -901,12 +896,18 @@ void dcn35_init_pipes(struct dc *dc, struct dc_state *context) void dcn35_enable_plane(struct dc *dc, struct pipe_ctx *pipe_ctx, struct dc_state *context) { + struct dpp *dpp = pipe_ctx->plane_res.dpp; + struct dccg *dccg = dc->res_pool->dccg; + + /* enable DCFCLK current DCHUB */ pipe_ctx->plane_res.hubp->funcs->hubp_clk_cntl(pipe_ctx->plane_res.hubp, true); /* initialize HUBP on power up */ pipe_ctx->plane_res.hubp->funcs->hubp_init(pipe_ctx->plane_res.hubp); - + /*make sure DPPCLK is on*/ + dccg->funcs->dccg_root_gate_disable_control(dccg, dpp->inst, true); + dpp->funcs->dpp_dppclk_control(dpp, false, true); /* make sure OPP_PIPE_CLOCK_EN = 1 */ pipe_ctx->stream_res.opp->funcs->opp_pipe_clock_control( pipe_ctx->stream_res.opp, @@ -923,6 +924,7 @@ void dcn35_enable_plane(struct dc *dc, struct pipe_ctx *pipe_ctx, // Program system aperture settings pipe_ctx->plane_res.hubp->funcs->hubp_set_vm_system_aperture_settings(pipe_ctx->plane_res.hubp, &apt); } + //DC_LOG_DEBUG("%s: dpp_inst(%d) =\n", __func__, dpp->inst); if (!pipe_ctx->top_pipe && pipe_ctx->plane_state @@ -938,6 +940,8 @@ void dcn35_plane_atomic_disable(struct dc *dc, struct pipe_ctx *pipe_ctx) { struct hubp *hubp = pipe_ctx->plane_res.hubp; struct dpp *dpp = pipe_ctx->plane_res.dpp; + struct dccg *dccg = dc->res_pool->dccg; + dc->hwss.wait_for_mpcc_disconnect(dc, dc->res_pool, pipe_ctx); @@ -955,7 +959,8 @@ void dcn35_plane_atomic_disable(struct dc *dc, struct pipe_ctx *pipe_ctx) hubp->funcs->hubp_clk_cntl(hubp, false); dpp->funcs->dpp_dppclk_control(dpp, false, false); -/*to do, need to support both case*/ + dccg->funcs->dccg_root_gate_disable_control(dccg, dpp->inst, false); + hubp->power_gated = true; hubp->funcs->hubp_reset(hubp); @@ -967,6 +972,8 @@ void dcn35_plane_atomic_disable(struct dc *dc, struct pipe_ctx *pipe_ctx) pipe_ctx->top_pipe = NULL; pipe_ctx->bottom_pipe = NULL; pipe_ctx->plane_state = NULL; + //DC_LOG_DEBUG("%s: dpp_inst(%d)=\n", __func__, dpp->inst); + } void dcn35_disable_plane(struct dc *dc, struct dc_state *state, struct pipe_ctx *pipe_ctx) -- 2.39.5

2 weeks, 3 days

5
116
0 0

[PATCH v2] scsi: ufs: core: Fix clk scaling to be conditional in reset and restore

by Anvith Dosapati

From: anvithdosapati <anvithdosapati(a)google.com> In ufshcd_host_reset_and_restore, scale up clocks only when clock scaling is supported. Without this change cpu latency is voted for 0 (ufshcd_pm_qos_update) during resume unconditionally. Signed-off-by: anvithdosapati <anvithdosapati(a)google.com> Fixes: a3cd5ec55f6c7 ("scsi: ufs: add load based scaling of UFS gear") Cc: stable(a)vger.kernel.org --- v2: - Update commit message - Add Fixes and Cc stable drivers/ufs/core/ufshcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 4410e7d93b7d..fac381ea2b3a 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -7802,7 +7802,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) hba->silence_err_logs = false; /* scale up clocks to max frequency before full reinitialization */ - ufshcd_scale_clks(hba, ULONG_MAX, true); + if (ufshcd_is_clkscaling_supported(hba)) + ufshcd_scale_clks(hba, ULONG_MAX, true); err = ufshcd_hba_enable(hba); -- 2.50.0.rc1.591.g9c95f17f64-goog

2 weeks, 3 days

2
1
0 0

[PATCH v2 2/2] usb: gadget: u_serial: Fix race condition in TTY wakeup

by Kuen-Han Tsai

A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE Fixes: 35f95fd7f234 ("TTY: usb/u_serial, use tty from tty_port") Cc: stable(a)vger.kernel.org Signed-off-by: Kuen-Han Tsai <khtsai(a)google.com> --- v2: - Move the example up to the changelog Traces: [ 51.494375][ T278] ttyGS1: shutdown [ 51.494817][ T269] android_work: sent uevent USB_STATE=DISCONNECTED [ 52.115792][ T1508] usb: [dm_bind] generic ttyGS1: super speed IN/ep1in OUT/ep1out [ 52.516288][ T1026] android_work: sent uevent USB_STATE=CONNECTED [ 52.551667][ T1533] gserial_connect: start ttyGS1 [ 52.565634][ T1533] [khtsai] enter gs_start_io, ttyGS1, port->port.tty=0000000046bd4060 [ 52.565671][ T1533] [khtsai] gs_start_rx, unlock port ttyGS1 [ 52.591552][ T1533] [khtsai] gs_start_rx, lock port ttyGS1 [ 52.619901][ T1533] [khtsai] gs_start_rx, unlock port ttyGS1 [ 52.638659][ T1325] [khtsai] gs_close, lock port ttyGS1 [ 52.656842][ T1325] gs_close: ttyGS1 (0000000046bd4060,00000000be9750a5) ... [ 52.683005][ T1325] [khtsai] gs_close, clear ttyGS1 [ 52.683007][ T1325] gs_close: ttyGS1 (0000000046bd4060,00000000be9750a5) done! [ 52.708643][ T1325] [khtsai] gs_close, unlock port ttyGS1 [ 52.747592][ T1533] [khtsai] gs_start_rx, lock port ttyGS1 [ 52.747616][ T1533] [khtsai] gs_start_io, ttyGS1, going to call tty_wakeup(), port->port.tty=0000000000000000 [ 52.747629][ T1533] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001f8 --- drivers/usb/gadget/function/u_serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index c043bdc30d8a..540dc5ab96fc 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -295,8 +295,8 @@ __acquires(&port->port_lock) break; } - if (do_tty_wake && port->port.tty) - tty_wakeup(port->port.tty); + if (do_tty_wake) + tty_port_tty_wakeup(&port->port); return status; } @@ -574,7 +574,7 @@ static int gs_start_io(struct gs_port *port) gs_start_tx(port); /* Unblock any pending writes into our circular buffer, in case * we didn't in gs_start_tx() */ - tty_wakeup(port->port.tty); + tty_port_tty_wakeup(&port->port); } else { /* Free reqs only if we are still connected */ if (port->port_usb) { -- 2.50.0.rc2.692.g299adb8693-goog

2 weeks, 3 days

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror