- Linux-stable-mirror - lists.linaro.org

+ powerpc-pseries-cmm-call-balloon_devinfo_init-also-without-config_balloon_compaction.patch added to mm-new branch

by Andrew Morton

The patch titled Subject: powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION has been added to the -mm mm-new branch. Its filename is powerpc-pseries-cmm-call-balloon_devinfo_init-also-without-config_balloon_compaction.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-new branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Note, mm-new is a provisional staging ground for work-in-progress patches, and acceptance into mm-new is a notification for others take notice and to finish up reviews. Please do not hesitate to respond to review feedback and post updated versions to replace or incrementally fixup patches in mm-new. Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: David Hildenbrand <david(a)redhat.com> Subject: powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION Date: Tue, 21 Oct 2025 12:06:05 +0200 Patch series "powerpc/pseries/cmm: two smaller fixes". Two smaller fixes identified while doing a bigger rework. This patch (of 2): We always have to initialize the balloon_dev_info, even when compaction is not configured in: otherwise the containing list and the lock are left uninitialized. Likely not many such configs exist in practice, but let's CC stable to be sure. This was found by code inspection. Link: https://lkml.kernel.org/r/20251021100606.148294-1-david@redhat.com Link: https://lkml.kernel.org/r/20251021100606.148294-2-david@redhat.com Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction") Signed-off-by: David Hildenbrand <david(a)redhat.com> Cc: Christophe Leroy <christophe.leroy(a)csgroup.eu> Cc: Madhavan Srinivasan <maddy(a)linux.ibm.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Nicholas Piggin <npiggin(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- arch/powerpc/platforms/pseries/cmm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/platforms/pseries/cmm.c~powerpc-pseries-cmm-call-balloon_devinfo_init-also-without-config_balloon_compaction +++ a/arch/powerpc/platforms/pseries/cmm.c @@ -550,7 +550,6 @@ static int cmm_migratepage(struct balloo static void cmm_balloon_compaction_init(void) { - balloon_devinfo_init(&b_dev_info); b_dev_info.migratepage = cmm_migratepage; } #else /* CONFIG_BALLOON_COMPACTION */ @@ -572,6 +571,7 @@ static int cmm_init(void) if (!firmware_has_feature(FW_FEATURE_CMO) && !simulate) return -EOPNOTSUPP; + balloon_devinfo_init(&b_dev_info); cmm_balloon_compaction_init(); rc = register_oom_notifier(&cmm_oom_nb); _ Patches currently in -mm which might be from david(a)redhat.com are powerpc-pseries-cmm-call-balloon_devinfo_init-also-without-config_balloon_compaction.patch powerpc-pseries-cmm-adjust-balloon_migrate-when-migrating-pages.patch

4 weeks

1
0
0 0

[patch] wifi: mt76: mt7925: fix AMPDU state handling in mt7925_tx_check_aggr

by Quan Zhou

Previously, the AMPDU state bit for a given TID was set before attempting to start a BA session, which could result in the AMPDU state being marked active even if ieee80211_start_tx_ba_session() failed. This patch changes the logic to only set the AMPDU state bit after successfully starting a BA session, ensuring proper synchronization between AMPDU state and BA session status. This fixes potential issues with aggregation state tracking and improves compatibility with mac80211 BA session management. Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free") Cc: stable(a)vger.kernel.org Signed-off-by: Quan Zhou <quan.zhou(a)mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt7925/mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mac.c b/drivers/net/wireless/mediatek/mt76/mt7925/mac.c index 871b67101976..80f1d738ec22 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mac.c @@ -881,8 +881,9 @@ static void mt7925_tx_check_aggr(struct ieee80211_sta *sta, struct sk_buff *skb, else mlink = &msta->deflink; - if (!test_and_set_bit(tid, &mlink->wcid.ampdu_state)) - ieee80211_start_tx_ba_session(sta, tid, 0); + if (!test_bit(tid, &mlink->wcid.ampdu_state) && + !ieee80211_start_tx_ba_session(sta, tid, 0)) + set_bit(tid, &mlink->wcid.ampdu_state); } static bool -- 2.45.2

4 weeks

2
1
0 0

Live Design 2025: Verified Business Contacts

by Melissa Underwood

Hi, Are you interested in the 15,805 verified business contacts available for the Live Design International 2025 event in Las Vegas this December. We're also including a Thanksgiving Day 20% reduction on our compliant contact data. If you'd like more details, just let me know or reply "Send me pricing." Best regards, Melissa Underwood Sr. Marketing Manager If you prefer not to receive updates, reply "Not Interested."

4 weeks

1
0
0 0

FAILED: patch "[PATCH] mm/mm_init: fix hash table order logging in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 0d6c356dd6547adac2b06b461528e3573f52d953 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025112033-barista-manicure-43e9@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0d6c356dd6547adac2b06b461528e3573f52d953 Mon Sep 17 00:00:00 2001 From: "Isaac J. Manjarres" <isaacmanjarres(a)google.com> Date: Tue, 28 Oct 2025 12:10:12 -0700 Subject: [PATCH] mm/mm_init: fix hash table order logging in alloc_large_system_hash() When emitting the order of the allocation for a hash table, alloc_large_system_hash() unconditionally subtracts PAGE_SHIFT from log base 2 of the allocation size. This is not correct if the allocation size is smaller than a page, and yields a negative value for the order as seen below: TCP established hash table entries: 32 (order: -4, 256 bytes, linear) TCP bind hash table entries: 32 (order: -2, 1024 bytes, linear) Use get_order() to compute the order when emitting the hash table information to correctly handle cases where the allocation size is smaller than a page: TCP established hash table entries: 32 (order: 0, 256 bytes, linear) TCP bind hash table entries: 32 (order: 0, 1024 bytes, linear) Link: https://lkml.kernel.org/r/20251028191020.413002-1-isaacmanjarres@google.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Isaac J. Manjarres <isaacmanjarres(a)google.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt(a)kernel.org> Reviewed-by: David Hildenbrand <david(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/mm_init.c b/mm/mm_init.c index 3db2dea7db4c..7712d887b696 100644 --- a/mm/mm_init.c +++ b/mm/mm_init.c @@ -2469,7 +2469,7 @@ void *__init alloc_large_system_hash(const char *tablename, panic("Failed to allocate %s hash table\n", tablename); pr_info("%s hash table entries: %ld (order: %d, %lu bytes, %s)\n", - tablename, 1UL << log2qty, ilog2(size) - PAGE_SHIFT, size, + tablename, 1UL << log2qty, get_order(size), size, virt ? (huge ? "vmalloc hugepage" : "vmalloc") : "linear"); if (_hash_shift)

4 weeks

3
2
0 0

FAILED: patch "[PATCH] mm/secretmem: fix use-after-free race in fault handler" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 6f86d0534fddfbd08687fa0f01479d4226bc3c3d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025112023-overact-rehydrate-ae42@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6f86d0534fddfbd08687fa0f01479d4226bc3c3d Mon Sep 17 00:00:00 2001 From: Lance Yang <lance.yang(a)linux.dev> Date: Fri, 31 Oct 2025 20:09:55 +0800 Subject: [PATCH] mm/secretmem: fix use-after-free race in fault handler When a page fault occurs in a secret memory file created with `memfd_secret(2)`, the kernel will allocate a new folio for it, mark the underlying page as not-present in the direct map, and add it to the file mapping. If two tasks cause a fault in the same page concurrently, both could end up allocating a folio and removing the page from the direct map, but only one would succeed in adding the folio to the file mapping. The task that failed undoes the effects of its attempt by (a) freeing the folio again and (b) putting the page back into the direct map. However, by doing these two operations in this order, the page becomes available to the allocator again before it is placed back in the direct mapping. If another task attempts to allocate the page between (a) and (b), and the kernel tries to access it via the direct map, it would result in a supervisor not-present page fault. Fix the ordering to restore the direct map before the folio is freed. Link: https://lkml.kernel.org/r/20251031120955.92116-1-lance.yang@linux.dev Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Lance Yang <lance.yang(a)linux.dev> Reported-by: Google Big Sleep <big-sleep-vuln-reports(a)google.com> Closes: https://lore.kernel.org/linux-mm/CAEXGt5QeDpiHTu3K9tvjUTPqo+d-=wuCNYPa+6sWK… Acked-by: David Hildenbrand <david(a)redhat.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt(a)kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/secretmem.c b/mm/secretmem.c index 60137305bc20..b59350daffe3 100644 --- a/mm/secretmem.c +++ b/mm/secretmem.c @@ -82,13 +82,13 @@ static vm_fault_t secretmem_fault(struct vm_fault *vmf) __folio_mark_uptodate(folio); err = filemap_add_folio(mapping, folio, offset, gfp); if (unlikely(err)) { - folio_put(folio); /* * If a split of large page was required, it * already happened when we marked the page invalid * which guarantees that this call won't fail */ set_direct_map_default_noflush(folio_page(folio, 0)); + folio_put(folio); if (err == -EEXIST) goto retry;

4 weeks

3
2
0 0

[PATCH net 7/8] can: rcar_canfd: Fix CAN-FD mode as default

by Marc Kleine-Budde

From: Biju Das <biju.das.jz(a)bp.renesas.com> The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") has aligned with the flow mentioned in the hardware manual for all SoCs except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to the wrong logic in the commit[1] sets the default mode to FD-Only mode instead of CAN-FD mode. This patch sets the CAN-FD mode as the default for all SoCs by dropping the rcar_canfd_set_mode() as some SoC requires mode setting in global reset mode, and the rest of the SoCs in channel reset mode and update the rcar_canfd_reset_controller() to take care of these constraints. Moreover, the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to simplify the code later to support FD-only mode. [1] commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") Cc: stable(a)vger.kernel.org Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> Link: https://patch.msgid.link/20251118123926.193445-1-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/rcar/rcar_canfd.c | 53 ++++++++++++++++++------------- 1 file changed, 31 insertions(+), 22 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 45d36adb51b7..4c0d7d26df9f 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val) rcar_canfd_update(val, val, addr); } +static void rcar_canfd_clear_bit_reg(void __iomem *addr, u32 val) +{ + rcar_canfd_update(val, 0, addr); +} + static void rcar_canfd_update_bit_reg(void __iomem *addr, u32 mask, u32 val) { rcar_canfd_update(mask, val, addr); @@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch, rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLCFG(w), rnc); } -static void rcar_canfd_set_mode(struct rcar_canfd_global *gpriv) -{ - if (gpriv->info->ch_interface_mode) { - u32 ch, val = gpriv->fdmode ? RCANFD_GEN4_FDCFG_FDOE - : RCANFD_GEN4_FDCFG_CLOE; - - for_each_set_bit(ch, &gpriv->channels_mask, - gpriv->info->max_channels) - rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, val); - } else { - if (gpriv->fdmode) - rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG, - RCANFD_GRMCFG_RCMC); - else - rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG, - RCANFD_GRMCFG_RCMC); - } -} - static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) { struct device *dev = &gpriv->pdev->dev; @@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) /* Reset Global error flags */ rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0); + /* Set the controller into appropriate mode */ + if (!gpriv->info->ch_interface_mode) { + if (gpriv->fdmode) + rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG, + RCANFD_GRMCFG_RCMC); + else + rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG, + RCANFD_GRMCFG_RCMC); + } + /* Transition all Channels to reset mode */ for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) { rcar_canfd_clear_bit(gpriv->base, @@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) dev_dbg(dev, "channel %u reset failed\n", ch); return err; } - } - /* Set the controller into appropriate mode */ - rcar_canfd_set_mode(gpriv); + /* Set the controller into appropriate mode */ + if (gpriv->info->ch_interface_mode) { + /* Do not set CLOE and FDOE simultaneously */ + if (!gpriv->fdmode) { + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_FDOE); + rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_CLOE); + } else { + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_FDOE); + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_CLOE); + } + } + } return 0; } -- 2.51.0

4 weeks

1
0
0 0

[PATCH net 6/8] can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling

by Marc Kleine-Budde

Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits to be reset. If we ever reach the condition of handling more than `SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its bits but without actually handling the interrupt inside of the loop body. This may, among other issues, cause us to never `netif_wake_queue()` again after a transmission interrupt. Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Cc: stable(a)vger.kernel.org Co-developed-by: Thomas Mühlbacher <tmuehlbacher(a)posteo.net> Signed-off-by: Thomas Mühlbacher <tmuehlbacher(a)posteo.net> Acked-by: Jernej Skrabec <jernej.skrabec(a)gmail.com> Link: https://patch.msgid.link/20251116-sun4i-fix-loop-v1-1-3d76d3f81950@pengutro… Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/sun4i_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c index 53bfd873de9b..0a7ba0942839 100644 --- a/drivers/net/can/sun4i_can.c +++ b/drivers/net/can/sun4i_can.c @@ -657,8 +657,8 @@ static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id) u8 isrc, status; int n = 0; - while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) && - (n < SUN4I_CAN_MAX_IRQ)) { + while ((n < SUN4I_CAN_MAX_IRQ) && + (isrc = readl(priv->base + SUN4I_REG_INT_ADDR))) { n++; status = readl(priv->base + SUN4I_REG_STA_ADDR); -- 2.51.0

4 weeks

1
0
0 0

[PATCH net 2/8] can: sja1000: fix max irq loop handling

by Marc Kleine-Budde

From: Thomas Mühlbacher <tmuehlbacher(a)posteo.net> Reading the interrupt register `SJA1000_IR` causes all of its bits to be reset. If we ever reach the condition of handling more than `SJA1000_MAX_IRQ` IRQs, we will have read the register and reset all its bits but without actually handling the interrupt inside of the loop body. This may, among other issues, cause us to never `netif_wake_queue()` again after a transmission interrupt. Fixes: 429da1cc841b ("can: Driver for the SJA1000 CAN controller") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Mühlbacher <tmuehlbacher(a)posteo.net> Acked-by: Oliver Hartkopp <socketcan(a)hartkopp.net> Link: https://patch.msgid.link/20251115153437.11419-1-tmuehlbacher@posteo.net Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/sja1000/sja1000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 4d245857ef1c..83476af8adb5 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -548,8 +548,8 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) goto out; - while ((isrc = priv->read_reg(priv, SJA1000_IR)) && - (n < SJA1000_MAX_IRQ)) { + while ((n < SJA1000_MAX_IRQ) && + (isrc = priv->read_reg(priv, SJA1000_IR))) { status = priv->read_reg(priv, SJA1000_SR); /* check for absent controller due to hw unplug */ -- 2.51.0

4 weeks

1
0
0 0

[PATCH] can: rcar_canfd: Fix CAN-FD mode as default

by Biju

From: Biju Das <biju.das.jz(a)bp.renesas.com> The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") has aligned with the flow mentioned in the hardware manual for all SoCs except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to the wrong logic in the commit[1] sets the default mode to FD-Only mode instead of CAN-FD mode. This patch sets the CAN-FD mode as the default for all SoCs by dropping the rcar_canfd_set_mode() as some SoC requires mode setting in global reset mode, and the rest of the SoCs in channel reset mode and update the rcar_canfd_reset_controller() to take care of these constraints. Moreover, the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to simplify the code later to support FD-only mode. [1] commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") Cc: stable(a)vger.kernel.org Signed-off-by: Biju Das <biju.das.jz(a)bp.renesas.com> --- drivers/net/can/rcar/rcar_canfd.c | 53 ++++++++++++++++++------------- 1 file changed, 31 insertions(+), 22 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 49ab65274b51..05dbdf46dd6f 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val) rcar_canfd_update(val, val, addr); } +static void rcar_canfd_clear_bit_reg(void __iomem *addr, u32 val) +{ + rcar_canfd_update(val, 0, addr); +} + static void rcar_canfd_update_bit_reg(void __iomem *addr, u32 mask, u32 val) { rcar_canfd_update(mask, val, addr); @@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch, rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLCFG(w), rnc); } -static void rcar_canfd_set_mode(struct rcar_canfd_global *gpriv) -{ - if (gpriv->info->ch_interface_mode) { - u32 ch, val = gpriv->fdmode ? RCANFD_GEN4_FDCFG_FDOE - : RCANFD_GEN4_FDCFG_CLOE; - - for_each_set_bit(ch, &gpriv->channels_mask, - gpriv->info->max_channels) - rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, val); - } else { - if (gpriv->fdmode) - rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG, - RCANFD_GRMCFG_RCMC); - else - rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG, - RCANFD_GRMCFG_RCMC); - } -} - static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) { struct device *dev = &gpriv->pdev->dev; @@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) /* Reset Global error flags */ rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0); + /* Set the controller into appropriate mode */ + if (!gpriv->info->ch_interface_mode) { + if (gpriv->fdmode) + rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG, + RCANFD_GRMCFG_RCMC); + else + rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG, + RCANFD_GRMCFG_RCMC); + } + /* Transition all Channels to reset mode */ for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) { rcar_canfd_clear_bit(gpriv->base, @@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) dev_dbg(dev, "channel %u reset failed\n", ch); return err; } - } - /* Set the controller into appropriate mode */ - rcar_canfd_set_mode(gpriv); + /* Set the controller into appropriate mode */ + if (gpriv->info->ch_interface_mode) { + /* Do not set CLOE and FDOE simultaneously */ + if (!gpriv->fdmode) { + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_FDOE); + rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_CLOE); + } else { + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_FDOE); + rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg, + RCANFD_GEN4_FDCFG_CLOE); + } + } + } return 0; } -- 2.43.0

4 weeks

3
3
0 0

[PATCH 1/2] HID: logitech-dj: Remove duplicate error logging

by Hans de Goede

logi_dj_recv_query_paired_devices() and logi_dj_recv_switch_to_dj_mode() both have 2 callers which all log an error if the function fails. Move the error logging to inside these 2 functions to remove the duplicated error logging in the callers. While at it also move the logi_dj_recv_send_report() call error handling in logi_dj_recv_switch_to_dj_mode() to directly after the call. That call only fails if the report cannot be found and in that case it does nothing, so the msleep() is not necessary on failures. Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()") Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <johannes.goede(a)oss.qualcomm.com> --- drivers/hid/hid-logitech-dj.c | 56 ++++++++++++++--------------------- 1 file changed, 23 insertions(+), 33 deletions(-) diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index d66f4807311a..58a848ed248d 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -889,7 +889,6 @@ static void delayedwork_callback(struct work_struct *work) struct dj_workitem workitem; unsigned long flags; int count; - int retval; dbg_hid("%s\n", __func__); @@ -926,11 +925,7 @@ static void delayedwork_callback(struct work_struct *work) logi_dj_recv_destroy_djhid_device(djrcv_dev, &workitem); break; case WORKITEM_TYPE_UNKNOWN: - retval = logi_dj_recv_query_paired_devices(djrcv_dev); - if (retval) { - hid_err(djrcv_dev->hidpp, "%s: logi_dj_recv_query_paired_devices error: %d\n", - __func__, retval); - } + logi_dj_recv_query_paired_devices(djrcv_dev); break; case WORKITEM_TYPE_EMPTY: dbg_hid("%s: device list is empty\n", __func__); @@ -1323,8 +1318,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) djrcv_dev->last_query = jiffies; - if (djrcv_dev->type != recvr_type_dj) - return logi_dj_recv_query_hidpp_devices(djrcv_dev); + if (djrcv_dev->type != recvr_type_dj) { + retval = logi_dj_recv_query_hidpp_devices(djrcv_dev); + goto out; + } dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) @@ -1334,6 +1331,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); kfree(dj_report); +out: + if (retval < 0) + hid_err(djrcv_dev->hidpp, "%s error:%d\n", __func__, retval); + return retval; } @@ -1359,6 +1360,8 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, (u8)timeout; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); + if (retval) + goto out; /* * Ugly sleep to work around a USB 3.0 bug when the receiver is @@ -1367,11 +1370,6 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, * 50 msec should gives enough time to the receiver to be ready. */ msleep(50); - - if (retval) { - kfree(dj_report); - return retval; - } } /* @@ -1397,7 +1395,12 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, HIDPP_REPORT_SHORT_LENGTH, HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); +out: kfree(dj_report); + + if (retval < 0) + hid_err(hdev, "%s error:%d\n", __func__, retval); + return retval; } @@ -1935,11 +1938,8 @@ static int logi_dj_probe(struct hid_device *hdev, if (has_hidpp) { retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); - if (retval < 0) { - hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n", - __func__, retval); + if (retval < 0) goto switch_to_dj_mode_fail; - } } /* This is enabling the polling urb on the IN endpoint */ @@ -1957,15 +1957,11 @@ static int logi_dj_probe(struct hid_device *hdev, spin_lock_irqsave(&djrcv_dev->lock, flags); djrcv_dev->ready = true; spin_unlock_irqrestore(&djrcv_dev->lock, flags); - retval = logi_dj_recv_query_paired_devices(djrcv_dev); - if (retval < 0) { - hid_err(hdev, "%s: logi_dj_recv_query_paired_devices error:%d\n", - __func__, retval); - /* - * This can happen with a KVM, let the probe succeed, - * logi_dj_recv_queue_unknown_work will retry later. - */ - } + /* + * This can fail with a KVM. Ignore errors to let the probe + * succeed, logi_dj_recv_queue_unknown_work will retry later. + */ + logi_dj_recv_query_paired_devices(djrcv_dev); } return 0; @@ -1982,18 +1978,12 @@ static int logi_dj_probe(struct hid_device *hdev, #ifdef CONFIG_PM static int logi_dj_reset_resume(struct hid_device *hdev) { - int retval; struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); if (!djrcv_dev || djrcv_dev->hidpp != hdev) return 0; - retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); - if (retval < 0) { - hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n", - __func__, retval); - } - + logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); return 0; } #endif -- 2.51.1

4 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror