Generally PASID support requires ACS settings that usually create
single device groups, but there are some niche cases where we can get
multi-device groups and still have working PASID support. The primary
issue is that PCI switches are not required to treat PASID tagged TLPs
specially so appropriate ACS settings are required to route all TLPs to
the host bridge if PASID is going to work properly.
pci_enable_pasid() does check that each device that will use PASID has
the proper ACS settings to achieve this routing.
However, no-PASID devices can be combined with PASID capable devices
within the same topology using non-uniform ACS settings. In this case
the no-PASID devices may not have strict route to host ACS flags and
end up being grouped with the PASID devices.
This configuration fails to allow use of the PASID within the iommu
core code which wrongly checks if the no-PASID device supports PASID.
Fix this by ignoring no-PASID devices during the PASID validation. They
will never issue a PASID TLP anyhow so they can be ignored.
Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()")
Cc: stable(a)vger.kernel.org
Signed-off-by: Tushar Dave <tdave(a)nvidia.com>
---
changes in v3:
- addressed review comment from Vasant.
drivers/iommu/iommu.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 60aed01e54f2..636fc68a8ec0 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -3329,10 +3329,12 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain,
int ret;
for_each_group_device(group, device) {
- ret = domain->ops->set_dev_pasid(domain, device->dev,
- pasid, NULL);
- if (ret)
- goto err_revert;
+ if (device->dev->iommu->max_pasids > 0) {
+ ret = domain->ops->set_dev_pasid(domain, device->dev,
+ pasid, NULL);
+ if (ret)
+ goto err_revert;
+ }
}
return 0;
@@ -3342,7 +3344,8 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain,
for_each_group_device(group, device) {
if (device == last_gdev)
break;
- iommu_remove_dev_pasid(device->dev, pasid, domain);
+ if (device->dev->iommu->max_pasids > 0)
+ iommu_remove_dev_pasid(device->dev, pasid, domain);
}
return ret;
}
@@ -3353,8 +3356,10 @@ static void __iommu_remove_group_pasid(struct iommu_group *group,
{
struct group_device *device;
- for_each_group_device(group, device)
- iommu_remove_dev_pasid(device->dev, pasid, domain);
+ for_each_group_device(group, device) {
+ if (device->dev->iommu->max_pasids > 0)
+ iommu_remove_dev_pasid(device->dev, pasid, domain);
+ }
}
/*
@@ -3391,7 +3396,13 @@ int iommu_attach_device_pasid(struct iommu_domain *domain,
mutex_lock(&group->mutex);
for_each_group_device(group, device) {
- if (pasid >= device->dev->iommu->max_pasids) {
+ /*
+ * Skip PASID validation for devices without PASID support
+ * (max_pasids = 0). These devices cannot issue transactions
+ * with PASID, so they don't affect group's PASID usage.
+ */
+ if ((device->dev->iommu->max_pasids > 0) &&
+ (pasid >= device->dev->iommu->max_pasids)) {
ret = -EINVAL;
goto out_unlock;
}
--
2.34.1
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable(a)vger.kernel.org
Fixes: d1a890fa37f2 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Signed-off-by: Ronak Doshi <ronak.doshi(a)broadcom.com>
Acked-by: Guolin Yang <guolin.yang(a)broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings
---
drivers/net/vmxnet3/vmxnet3_drv.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3df6aabc7e33..c676979c7ab9 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -3607,8 +3607,6 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
int err = 0;
- WRITE_ONCE(netdev->mtu, new_mtu);
-
/*
* Reset_work may be in the middle of resetting the device, wait for its
* completion.
@@ -3622,6 +3620,7 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
/* we need to re-create the rx queue based on the new mtu */
vmxnet3_rq_destroy_all(adapter);
+ WRITE_ONCE(netdev->mtu, new_mtu);
vmxnet3_adjust_rx_ring_size(adapter);
err = vmxnet3_rq_create_all(adapter);
if (err) {
@@ -3638,6 +3637,8 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
"Closing it\n", err);
goto out;
}
+ } else {
+ WRITE_ONCE(netdev->mtu, new_mtu);
}
out:
--
2.45.2
Add the missing memory barrier to make sure that the REO dest ring
descriptor is read after the head pointer to avoid using stale data on
weakly ordered architectures like aarch64.
This may fix the ring-buffer corruption worked around by commit
f9fff67d2d7c ("wifi: ath11k: Fix SKB corruption in REO destination
ring") by silently discarding data, and may possibly also address user
reported errors like:
ath11k_pci 0006:01:00.0: msdu_done bit in attention is not set
Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable(a)vger.kernel.org # 5.6
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218005
Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org>
---
As I reported here:
https://lore.kernel.org/lkml/Z9G5zEOcTdGKm7Ei@hovoldconsulting.com/
the ath11k and ath12k appear to be missing a number of memory barriers
that are required on weakly ordered architectures like aarch64 to avoid
memory corruption issues.
Here's a fix for one more such case which people already seem to be
hitting.
Note that I've seen one "msdu_done" bit not set warning also with this
patch so whether it helps with that at all remains to be seen. I'm CCing
Jens and Steev that see these warnings frequently and that may be able
to help out with testing.
Johan
drivers/net/wireless/ath/ath11k/dp_rx.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 029ecf51c9ef..0a57b337e4c6 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2646,7 +2646,7 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
struct ath11k *ar;
struct hal_reo_dest_ring *desc;
enum hal_reo_dest_ring_push_reason push_reason;
- u32 cookie;
+ u32 cookie, info0, rx_msdu_info0, rx_mpdu_info0;
int i;
for (i = 0; i < MAX_RADIOS; i++)
@@ -2659,11 +2659,14 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
try_again:
ath11k_hal_srng_access_begin(ab, srng);
+ /* Make sure descriptor is read after the head pointer. */
+ dma_rmb();
+
while (likely(desc =
(struct hal_reo_dest_ring *)ath11k_hal_srng_dst_get_next_entry(ab,
srng))) {
cookie = FIELD_GET(BUFFER_ADDR_INFO1_SW_COOKIE,
- desc->buf_addr_info.info1);
+ READ_ONCE(desc->buf_addr_info.info1));
buf_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_BUF_ID,
cookie);
mac_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_PDEV_ID, cookie);
@@ -2692,8 +2695,9 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
num_buffs_reaped[mac_id]++;
+ info0 = READ_ONCE(desc->info0);
push_reason = FIELD_GET(HAL_REO_DEST_RING_INFO0_PUSH_REASON,
- desc->info0);
+ info0);
if (unlikely(push_reason !=
HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION)) {
dev_kfree_skb_any(msdu);
@@ -2701,18 +2705,21 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
continue;
}
- rxcb->is_first_msdu = !!(desc->rx_msdu_info.info0 &
+ rx_msdu_info0 = READ_ONCE(desc->rx_msdu_info.info0);
+ rx_mpdu_info0 = READ_ONCE(desc->rx_mpdu_info.info0);
+
+ rxcb->is_first_msdu = !!(rx_msdu_info0 &
RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU);
- rxcb->is_last_msdu = !!(desc->rx_msdu_info.info0 &
+ rxcb->is_last_msdu = !!(rx_msdu_info0 &
RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU);
- rxcb->is_continuation = !!(desc->rx_msdu_info.info0 &
+ rxcb->is_continuation = !!(rx_msdu_info0 &
RX_MSDU_DESC_INFO0_MSDU_CONTINUATION);
rxcb->peer_id = FIELD_GET(RX_MPDU_DESC_META_DATA_PEER_ID,
- desc->rx_mpdu_info.meta_data);
+ READ_ONCE(desc->rx_mpdu_info.meta_data));
rxcb->seq_no = FIELD_GET(RX_MPDU_DESC_INFO0_SEQ_NUM,
- desc->rx_mpdu_info.info0);
+ rx_mpdu_info0);
rxcb->tid = FIELD_GET(HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM,
- desc->info0);
+ info0);
rxcb->mac_id = mac_id;
__skb_queue_tail(&msdu_list[mac_id], msdu);
--
2.48.1
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes
breaks and the log fills up with errors like:
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484
which based on a quick look at the driver seemed to indicate some kind
of ring-buffer corruption.
Miaoqing Pan tracked it down to the host seeing the updated destination
ring head pointer before the updated descriptor, and the error handling
for that in turn leaves the ring buffer in an inconsistent state.
Add the missing memory barrier to make sure that the descriptor is read
after the head pointer to address the root cause of the corruption while
fixing up the error handling in case there are ever any (ordering) bugs
on the device side.
Note that the READ_ONCE() are only needed to avoid compiler mischief in
case the ring-buffer helpers are ever inlined.
Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218623
Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com
Cc: Miaoqing Pan <quic_miaoqing(a)quicinc.com>
Cc: stable(a)vger.kernel.org # 5.6
Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org>
---
drivers/net/wireless/ath/ath11k/ce.c | 11 +++++------
drivers/net/wireless/ath/ath11k/hal.c | 4 ++--
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ce.c b/drivers/net/wireless/ath/ath11k/ce.c
index e66e86bdec20..9d8efec46508 100644
--- a/drivers/net/wireless/ath/ath11k/ce.c
+++ b/drivers/net/wireless/ath/ath11k/ce.c
@@ -393,11 +393,10 @@ static int ath11k_ce_completed_recv_next(struct ath11k_ce_pipe *pipe,
goto err;
}
+ /* Make sure descriptor is read after the head pointer. */
+ dma_rmb();
+
*nbytes = ath11k_hal_ce_dst_status_get_length(desc);
- if (*nbytes == 0) {
- ret = -EIO;
- goto err;
- }
*skb = pipe->dest_ring->skb[sw_index];
pipe->dest_ring->skb[sw_index] = NULL;
@@ -430,8 +429,8 @@ static void ath11k_ce_recv_process_cb(struct ath11k_ce_pipe *pipe)
dma_unmap_single(ab->dev, ATH11K_SKB_RXCB(skb)->paddr,
max_nbytes, DMA_FROM_DEVICE);
- if (unlikely(max_nbytes < nbytes)) {
- ath11k_warn(ab, "rxed more than expected (nbytes %d, max %d)",
+ if (unlikely(max_nbytes < nbytes || nbytes == 0)) {
+ ath11k_warn(ab, "unexpected rx length (nbytes %d, max %d)",
nbytes, max_nbytes);
dev_kfree_skb_any(skb);
continue;
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 61f4b6dd5380..8cb1505a5a0c 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -599,7 +599,7 @@ u32 ath11k_hal_ce_dst_status_get_length(void *buf)
struct hal_ce_srng_dst_status_desc *desc = buf;
u32 len;
- len = FIELD_GET(HAL_CE_DST_STATUS_DESC_FLAGS_LEN, desc->flags);
+ len = FIELD_GET(HAL_CE_DST_STATUS_DESC_FLAGS_LEN, READ_ONCE(desc->flags));
desc->flags &= ~HAL_CE_DST_STATUS_DESC_FLAGS_LEN;
return len;
@@ -829,7 +829,7 @@ void ath11k_hal_srng_access_begin(struct ath11k_base *ab, struct hal_srng *srng)
srng->u.src_ring.cached_tp =
*(volatile u32 *)srng->u.src_ring.tp_addr;
} else {
- srng->u.dst_ring.cached_hp = *srng->u.dst_ring.hp_addr;
+ srng->u.dst_ring.cached_hp = READ_ONCE(*srng->u.dst_ring.hp_addr);
/* Try to prefetch the next descriptor in the ring */
if (srng->flags & HAL_SRNG_FLAGS_CACHED)
--
2.48.1
Embryo socket is not queued in gc_candidates, so we can't drop
a reference held by its oob_skb.
Let's say we create listener and embryo sockets, send the
listener's fd to the embryo as OOB data, and close() them
without recv()ing the OOB data.
There is a self-reference cycle like
listener -> embryo.oob_skb -> listener
, so this must be cleaned up by GC. Otherwise, the listener's
refcnt is not released and sockets are leaked:
# unshare -n
# cat /proc/net/protocols | grep UNIX-STREAM
UNIX-STREAM 1024 0 -1 NI 0 yes kernel ...
# python3
>>> from array import array
>>> from socket import *
>>>
>>> s = socket(AF_UNIX, SOCK_STREAM)
>>> s.bind('\0test\0')
>>> s.listen()
>>>
>>> c = socket(AF_UNIX, SOCK_STREAM)
>>> c.connect(s.getsockname())
>>> c.sendmsg([b'x'], [(SOL_SOCKET, SCM_RIGHTS, array('i', [s.fileno()]))], MSG_OOB)
1
>>> quit()
# cat /proc/net/protocols | grep UNIX-STREAM
UNIX-STREAM 1024 3 -1 NI 0 yes kernel ...
^^^
3 sockets still in use after FDs are close()d
Let's drop the embryo socket's oob_skb ref in scan_inflight().
This also fixes a racy access to oob_skb that commit 9841991a446c
("af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue
lock.") fixed for the new Tarjan's algo-based GC.
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Lei Lu <llfamsec(a)gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu(a)amazon.com>
---
This has no upstream commit because I replaced the entire GC in
6.10 and the new GC does not have this bug, and this fix is only
applicable to the old GC (<= 6.9), thus for 5.15/6.1/6.6.
---
---
net/unix/garbage.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 2a758531e102..b3fbdf129944 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -102,13 +102,14 @@ static void scan_inflight(struct sock *x, void (*func)(struct unix_sock *),
/* Process the descriptors of this socket */
int nfd = UNIXCB(skb).fp->count;
struct file **fp = UNIXCB(skb).fp->fp;
+ struct unix_sock *u;
while (nfd--) {
/* Get the socket the fd matches if it indeed does so */
struct sock *sk = unix_get_socket(*fp++);
if (sk) {
- struct unix_sock *u = unix_sk(sk);
+ u = unix_sk(sk);
/* Ignore non-candidates, they could
* have been added to the queues after
@@ -122,6 +123,13 @@ static void scan_inflight(struct sock *x, void (*func)(struct unix_sock *),
}
}
if (hit && hitlist != NULL) {
+#if IS_ENABLED(CONFIG_AF_UNIX_OOB)
+ u = unix_sk(x);
+ if (u->oob_skb) {
+ WARN_ON_ONCE(skb_unref(u->oob_skb));
+ u->oob_skb = NULL;
+ }
+#endif
__skb_unlink(skb, &x->sk_receive_queue);
__skb_queue_tail(hitlist, skb);
}
@@ -299,17 +307,9 @@ void unix_gc(void)
* which are creating the cycle(s).
*/
skb_queue_head_init(&hitlist);
- list_for_each_entry(u, &gc_candidates, link) {
+ list_for_each_entry(u, &gc_candidates, link)
scan_children(&u->sk, inc_inflight, &hitlist);
-#if IS_ENABLED(CONFIG_AF_UNIX_OOB)
- if (u->oob_skb) {
- kfree_skb(u->oob_skb);
- u->oob_skb = NULL;
- }
-#endif
- }
-
/* not_cycle_list contains those sockets which do not make up a
* cycle. Restore these to the inflight list.
*/
--
2.39.5 (Apple Git-154)
From: Amir Goldstein <amir73il(a)gmail.com>
commit 974e3fe0ac61de85015bbe5a4990cf4127b304b2 upstream.
Encoding file handles is usually performed by a filesystem >encode_fh()
method that may fail for various reasons.
The legacy users of exportfs_encode_fh(), namely, nfsd and
name_to_handle_at(2) syscall are ready to cope with the possibility
of failure to encode a file handle.
There are a few other users of exportfs_encode_{fh,fid}() that
currently have a WARN_ON() assertion when ->encode_fh() fails.
Relax those assertions because they are wrong.
The second linked bug report states commit 16aac5ad1fa9 ("ovl: support
encoding non-decodable file handles") in v6.6 as the regressing commit,
but this is not accurate.
The aforementioned commit only increases the chances of the assertion
and allows triggering the assertion with the reproducer using overlayfs,
inotify and drop_caches.
Triggering this assertion was always possible with other filesystems and
other reasons of ->encode_fh() failures and more particularly, it was
also possible with the exact same reproducer using overlayfs that is
mounted with options index=on,nfs_export=on also on kernels < v6.6.
Therefore, I am not listing the aforementioned commit as a Fixes commit.
Backport hint: this patch will have a trivial conflict applying to
v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
Reported-by: syzbot+ec07f6f5ce62b858579f(a)syzkaller.appspotmail.com
Tested-by: syzbot+ec07f6f5ce62b858579f(a)syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/671fd40c.050a0220.4735a.024f.GAE@goog…
Reported-by: Dmitry Safonov <dima(a)arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAGrbwDTLt6drB9eaUagnQVgdPBmhLfqqxAf3…
Cc: stable(a)vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il(a)gmail.com>
Link: https://lore.kernel.org/r/20241219115301.465396-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner(a)kernel.org>
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
fs/notify/fdinfo.c | 4 +---
fs/overlayfs/copy_up.c | 5 ++---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/fs/notify/fdinfo.c b/fs/notify/fdinfo.c
index 55081ae3a6ec..dd5bc6ffae85 100644
--- a/fs/notify/fdinfo.c
+++ b/fs/notify/fdinfo.c
@@ -51,10 +51,8 @@ static void show_mark_fhandle(struct seq_file *m, struct inode *inode)
size = f.handle.handle_bytes >> 2;
ret = exportfs_encode_inode_fh(inode, (struct fid *)f.handle.f_handle, &size, NULL);
- if ((ret == FILEID_INVALID) || (ret < 0)) {
- WARN_ONCE(1, "Can't encode file handler for inotify: %d\n", ret);
+ if ((ret == FILEID_INVALID) || (ret < 0))
return;
- }
f.handle.handle_type = ret;
f.handle.handle_bytes = size * sizeof(u32);
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index 65ac504595ba..8557180bd7e1 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -302,9 +302,8 @@ struct ovl_fh *ovl_encode_real_fh(struct dentry *real, bool is_upper)
buflen = (dwords << 2);
err = -EIO;
- if (WARN_ON(fh_type < 0) ||
- WARN_ON(buflen > MAX_HANDLE_SZ) ||
- WARN_ON(fh_type == FILEID_INVALID))
+ if (fh_type < 0 || fh_type == FILEID_INVALID ||
+ WARN_ON(buflen > MAX_HANDLE_SZ))
goto out_err;
fh->fb.version = OVL_FH_VERSION;
--
2.34.1
From: Amir Goldstein <amir73il(a)gmail.com>
commit 974e3fe0ac61de85015bbe5a4990cf4127b304b2 upstream.
Encoding file handles is usually performed by a filesystem >encode_fh()
method that may fail for various reasons.
The legacy users of exportfs_encode_fh(), namely, nfsd and
name_to_handle_at(2) syscall are ready to cope with the possibility
of failure to encode a file handle.
There are a few other users of exportfs_encode_{fh,fid}() that
currently have a WARN_ON() assertion when ->encode_fh() fails.
Relax those assertions because they are wrong.
The second linked bug report states commit 16aac5ad1fa9 ("ovl: support
encoding non-decodable file handles") in v6.6 as the regressing commit,
but this is not accurate.
The aforementioned commit only increases the chances of the assertion
and allows triggering the assertion with the reproducer using overlayfs,
inotify and drop_caches.
Triggering this assertion was always possible with other filesystems and
other reasons of ->encode_fh() failures and more particularly, it was
also possible with the exact same reproducer using overlayfs that is
mounted with options index=on,nfs_export=on also on kernels < v6.6.
Therefore, I am not listing the aforementioned commit as a Fixes commit.
Backport hint: this patch will have a trivial conflict applying to
v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
Reported-by: syzbot+ec07f6f5ce62b858579f(a)syzkaller.appspotmail.com
Tested-by: syzbot+ec07f6f5ce62b858579f(a)syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/671fd40c.050a0220.4735a.024f.GAE@goog…
Reported-by: Dmitry Safonov <dima(a)arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAGrbwDTLt6drB9eaUagnQVgdPBmhLfqqxAf3…
Cc: stable(a)vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il(a)gmail.com>
Link: https://lore.kernel.org/r/20241219115301.465396-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner(a)kernel.org>
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
fs/notify/fdinfo.c | 4 +---
fs/overlayfs/copy_up.c | 5 ++---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/fs/notify/fdinfo.c b/fs/notify/fdinfo.c
index 55081ae3a6ec..dd5bc6ffae85 100644
--- a/fs/notify/fdinfo.c
+++ b/fs/notify/fdinfo.c
@@ -51,10 +51,8 @@ static void show_mark_fhandle(struct seq_file *m, struct inode *inode)
size = f.handle.handle_bytes >> 2;
ret = exportfs_encode_inode_fh(inode, (struct fid *)f.handle.f_handle, &size, NULL);
- if ((ret == FILEID_INVALID) || (ret < 0)) {
- WARN_ONCE(1, "Can't encode file handler for inotify: %d\n", ret);
+ if ((ret == FILEID_INVALID) || (ret < 0))
return;
- }
f.handle.handle_type = ret;
f.handle.handle_bytes = size * sizeof(u32);
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index 203b88293f6b..ced56696beeb 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -361,9 +361,8 @@ struct ovl_fh *ovl_encode_real_fh(struct ovl_fs *ofs, struct dentry *real,
buflen = (dwords << 2);
err = -EIO;
- if (WARN_ON(fh_type < 0) ||
- WARN_ON(buflen > MAX_HANDLE_SZ) ||
- WARN_ON(fh_type == FILEID_INVALID))
+ if (fh_type < 0 || fh_type == FILEID_INVALID ||
+ WARN_ON(buflen > MAX_HANDLE_SZ))
goto out_err;
fh->fb.version = OVL_FH_VERSION;
--
2.34.1
From: Amir Goldstein <amir73il(a)gmail.com>
commit 974e3fe0ac61de85015bbe5a4990cf4127b304b2 upstream.
Encoding file handles is usually performed by a filesystem >encode_fh()
method that may fail for various reasons.
The legacy users of exportfs_encode_fh(), namely, nfsd and
name_to_handle_at(2) syscall are ready to cope with the possibility
of failure to encode a file handle.
There are a few other users of exportfs_encode_{fh,fid}() that
currently have a WARN_ON() assertion when ->encode_fh() fails.
Relax those assertions because they are wrong.
The second linked bug report states commit 16aac5ad1fa9 ("ovl: support
encoding non-decodable file handles") in v6.6 as the regressing commit,
but this is not accurate.
The aforementioned commit only increases the chances of the assertion
and allows triggering the assertion with the reproducer using overlayfs,
inotify and drop_caches.
Triggering this assertion was always possible with other filesystems and
other reasons of ->encode_fh() failures and more particularly, it was
also possible with the exact same reproducer using overlayfs that is
mounted with options index=on,nfs_export=on also on kernels < v6.6.
Therefore, I am not listing the aforementioned commit as a Fixes commit.
Backport hint: this patch will have a trivial conflict applying to
v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
Reported-by: syzbot+ec07f6f5ce62b858579f(a)syzkaller.appspotmail.com
Tested-by: syzbot+ec07f6f5ce62b858579f(a)syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/671fd40c.050a0220.4735a.024f.GAE@goog…
Reported-by: Dmitry Safonov <dima(a)arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAGrbwDTLt6drB9eaUagnQVgdPBmhLfqqxAf3…
Cc: stable(a)vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il(a)gmail.com>
Link: https://lore.kernel.org/r/20241219115301.465396-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner(a)kernel.org>
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
fs/notify/fdinfo.c | 4 +---
fs/overlayfs/copy_up.c | 5 ++---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/fs/notify/fdinfo.c b/fs/notify/fdinfo.c
index 55081ae3a6ec..dd5bc6ffae85 100644
--- a/fs/notify/fdinfo.c
+++ b/fs/notify/fdinfo.c
@@ -51,10 +51,8 @@ static void show_mark_fhandle(struct seq_file *m, struct inode *inode)
size = f.handle.handle_bytes >> 2;
ret = exportfs_encode_inode_fh(inode, (struct fid *)f.handle.f_handle, &size, NULL);
- if ((ret == FILEID_INVALID) || (ret < 0)) {
- WARN_ONCE(1, "Can't encode file handler for inotify: %d\n", ret);
+ if ((ret == FILEID_INVALID) || (ret < 0))
return;
- }
f.handle.handle_type = ret;
f.handle.handle_bytes = size * sizeof(u32);
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index 5fc32483afed..c5d8ad610a37 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -366,9 +366,8 @@ struct ovl_fh *ovl_encode_real_fh(struct ovl_fs *ofs, struct dentry *real,
buflen = (dwords << 2);
err = -EIO;
- if (WARN_ON(fh_type < 0) ||
- WARN_ON(buflen > MAX_HANDLE_SZ) ||
- WARN_ON(fh_type == FILEID_INVALID))
+ if (fh_type < 0 || fh_type == FILEID_INVALID ||
+ WARN_ON(buflen > MAX_HANDLE_SZ))
goto out_err;
fh->fb.version = OVL_FH_VERSION;
--
2.34.1
Hi ,
I'm offering a resource that connects aviation outreach with data-backed direction.
We provide a current and verified list of contacts, tailored specifically for your industry.
(i) High-Net-Worth Individuals (HNWI) seeking seamless luxury travel and private charters
(ii) MRO Professionals focused on enhancing maintenance and procurement strategies
(iii) Executive Assistants managing the travel needs of high-ranking executives
For businesses offering aviation products, maintenance services, or charter flights, these contacts are ideal for your campaign.
Please let me know if you'd like to explore the lead counts and their pricing structure.
Regards,
Jessica
Marketing Manager
Campaign Data Leads.,
Please respond with an Remove if you don't wish to receive further emails.
A warning is emitted in set_return_thunk() when the return thunk is
overwritten since this is likely a bug and will result in mitigations not
functioning and the mitigation information displayed in sysfs being
incorrect.
There is a special case when the return thunk is overwritten from
retbleed_return_thunk to srso_return_thunk since srso_return_thunk provides
a superset of the functionality of retbleed_return_thunk, and this is
handled correctly in entry_untrain_ret(). Avoid emitting the warning in
this scenario to clarify that this is not an issue.
This situation occurs on certain AMD processors (e.g. Zen2) which are
affected by both retbleed and srso.
Fixes: f4818881c47fd ("x86/its: Enable Indirect Target Selection mitigation")
Cc: stable(a)vger.kernel.org # 5.15.x-
Signed-off-by: Suraj Jitindar Singh <surajjs(a)amazon.com>
---
arch/x86/kernel/cpu/bugs.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 8596ce85026c..b7797636140f 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -69,7 +69,16 @@ void (*x86_return_thunk)(void) __ro_after_init = __x86_return_thunk;
static void __init set_return_thunk(void *thunk)
{
- if (x86_return_thunk != __x86_return_thunk)
+ /*
+ * There can only be one return thunk enabled at a time, so issue a
+ * warning when overwriting it. retbleed_return_thunk is a special case
+ * which is safe to be overwritten with srso_return_thunk since it
+ * provides a superset of the functionality and is handled correctly in
+ * entry_untrain_ret().
+ */
+ if ((x86_return_thunk != __x86_return_thunk) &&
+ (thunk != srso_return_thunk ||
+ x86_return_thunk != retbleed_return_thunk))
pr_warn("x86/bugs: return thunk changed\n");
x86_return_thunk = thunk;
--
2.34.1
For all the complexity of handling affinity for CPU hotplug, what we've
apparently managed to overlook is that arm_cmn_init_irqs() has in fact
always been setting the *initial* affinity of all IRQs to CPU 0, not the
CPU we subsequently choose for event scheduling. Oh dear.
Cc: stable(a)vger.kernel.org
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy(a)arm.com>
---
drivers/perf/arm-cmn.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index aa2908313558..e385f187a084 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -2558,6 +2558,7 @@ static int arm_cmn_probe(struct platform_device *pdev)
cmn->dev = &pdev->dev;
cmn->part = (unsigned long)device_get_match_data(cmn->dev);
+ cmn->cpu = cpumask_local_spread(0, dev_to_node(cmn->dev));
platform_set_drvdata(pdev, cmn);
if (cmn->part == PART_CMN600 && has_acpi_companion(cmn->dev)) {
@@ -2585,7 +2586,6 @@ static int arm_cmn_probe(struct platform_device *pdev)
if (err)
return err;
- cmn->cpu = cpumask_local_spread(0, dev_to_node(cmn->dev));
cmn->pmu = (struct pmu) {
.module = THIS_MODULE,
.parent = cmn->dev,
--
2.39.2.101.g768bb238c484.dirty
From: Shigeru Yoshida <syoshida(a)redhat.com>
[ Upstream commit fc1092f51567277509563800a3c56732070b6aa4 ]
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller(a)googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida(a)redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni(a)redhat.com>
Signed-off-by: Zhaoyang Li <lizy04(a)hust.edu.cn>
---
net/ipv4/ip_output.c | 3 ++-
net/ipv4/raw.c | 3 +++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index c82107bbd981..543d029102cf 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1580,7 +1580,8 @@ struct sk_buff *__ip_make_skb(struct sock *sk,
* so icmphdr does not in skb linear region and can not get icmp_type
* by icmp_hdr(skb)->type.
*/
- if (sk->sk_type == SOCK_RAW && !inet_sk(sk)->hdrincl)
+ if (sk->sk_type == SOCK_RAW &&
+ !(fl4->flowi4_flags & FLOWI_FLAG_KNOWN_NH))
icmp_type = fl4->fl4_icmp_type;
else
icmp_type = icmp_hdr(skb)->type;
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index ee0efd0efec4..c109bc376cc5 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -608,6 +608,9 @@ static int raw_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
(hdrincl ? FLOWI_FLAG_KNOWN_NH : 0),
daddr, saddr, 0, 0, sk->sk_uid);
+ fl4.fl4_icmp_type = 0;
+ fl4.fl4_icmp_code = 0;
+
if (!hdrincl) {
rfv.msg = msg;
rfv.hlen = 0;
--
2.25.1
From: Jann Horn <jannh(a)google.com>
commit 71c186efc1b2cf1aeabfeff3b9bd5ac4c5ac14d8 upstream.
Patch series "userfaultfd: fix races around pmd_trans_huge() check", v2.
The pmd_trans_huge() code in mfill_atomic() is wrong in three different
ways depending on kernel version:
1. The pmd_trans_huge() check is racy and can lead to a BUG_ON() (if you hit
the right two race windows) - I've tested this in a kernel build with
some extra mdelay() calls. See the commit message for a description
of the race scenario.
On older kernels (before 6.5), I think the same bug can even
theoretically lead to accessing transhuge page contents as a page table
if you hit the right 5 narrow race windows (I haven't tested this case).
2. As pointed out by Qi Zheng, pmd_trans_huge() is not sufficient for
detecting PMDs that don't point to page tables.
On older kernels (before 6.5), you'd just have to win a single fairly
wide race to hit this.
I've tested this on 6.1 stable by racing migration (with a mdelay()
patched into try_to_migrate()) against UFFDIO_ZEROPAGE - on my x86
VM, that causes a kernel oops in ptlock_ptr().
3. On newer kernels (>=6.5), for shmem mappings, khugepaged is allowed
to yank page tables out from under us (though I haven't tested that),
so I think the BUG_ON() checks in mfill_atomic() are just wrong.
I decided to write two separate fixes for these (one fix for bugs 1+2, one
fix for bug 3), so that the first fix can be backported to kernels
affected by bugs 1+2.
This patch (of 2):
This fixes two issues.
I discovered that the following race can occur:
mfill_atomic other thread
============ ============
<zap PMD>
pmdp_get_lockless() [reads none pmd]
<bail if trans_huge>
<if none:>
<pagefault creates transhuge zeropage>
__pte_alloc [no-op]
<zap PMD>
<bail if pmd_trans_huge(*dst_pmd)>
BUG_ON(pmd_none(*dst_pmd))
I have experimentally verified this in a kernel with extra mdelay() calls;
the BUG_ON(pmd_none(*dst_pmd)) triggers.
On kernels newer than commit 0d940a9b270b ("mm/pgtable: allow
pte_offset_map[_lock]() to fail"), this can't lead to anything worse than
a BUG_ON(), since the page table access helpers are actually designed to
deal with page tables concurrently disappearing; but on older kernels
(<=6.4), I think we could probably theoretically race past the two
BUG_ON() checks and end up treating a hugepage as a page table.
The second issue is that, as Qi Zheng pointed out, there are other types
of huge PMDs that pmd_trans_huge() can't catch: devmap PMDs and swap PMDs
(in particular, migration PMDs).
On <=6.4, this is worse than the first issue: If mfill_atomic() runs on a
PMD that contains a migration entry (which just requires winning a single,
fairly wide race), it will pass the PMD to pte_offset_map_lock(), which
assumes that the PMD points to a page table.
Breakage follows: First, the kernel tries to take the PTE lock (which will
crash or maybe worse if there is no "struct page" for the address bits in
the migration entry PMD - I think at least on X86 there usually is no
corresponding "struct page" thanks to the PTE inversion mitigation, amd64
looks different).
If that didn't crash, the kernel would next try to write a PTE into what
it wrongly thinks is a page table.
As part of fixing these issues, get rid of the check for pmd_trans_huge()
before __pte_alloc() - that's redundant, we're going to have to check for
that after the __pte_alloc() anyway.
Backport note: pmdp_get_lockless() is pmd_read_atomic() in older kernels.
Link: https://lkml.kernel.org/r/20240813-uffd-thp-flip-fix-v2-0-5efa61078a41@goog…
Link: https://lkml.kernel.org/r/20240813-uffd-thp-flip-fix-v2-1-5efa61078a41@goog…
Fixes: c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation")
Signed-off-by: Jann Horn <jannh(a)google.com>
Acked-by: David Hildenbrand <david(a)redhat.com>
Cc: Andrea Arcangeli <aarcange(a)redhat.com>
Cc: Hugh Dickins <hughd(a)google.com>
Cc: Jann Horn <jannh(a)google.com>
Cc: Pavel Emelyanov <xemul(a)virtuozzo.com>
Cc: Qi Zheng <zhengqi.arch(a)bytedance.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
[ According to backport note in git comment message, using pmd_read_atomic()
instead of pmdp_get_lockless() in older kernels ]
Signed-off-by: Xiangyu Chen <xiangyu.chen(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified on build test
---
mm/userfaultfd.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
index 992a0a16846f..998c7075c62a 100644
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -642,21 +642,23 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm,
}
dst_pmdval = pmd_read_atomic(dst_pmd);
- /*
- * If the dst_pmd is mapped as THP don't
- * override it and just be strict.
- */
- if (unlikely(pmd_trans_huge(dst_pmdval))) {
- err = -EEXIST;
- break;
- }
if (unlikely(pmd_none(dst_pmdval)) &&
unlikely(__pte_alloc(dst_mm, dst_pmd))) {
err = -ENOMEM;
break;
}
- /* If an huge pmd materialized from under us fail */
- if (unlikely(pmd_trans_huge(*dst_pmd))) {
+ dst_pmdval = pmd_read_atomic(dst_pmd);
+ /*
+ * If the dst_pmd is THP don't override it and just be strict.
+ * (This includes the case where the PMD used to be THP and
+ * changed back to none after __pte_alloc().)
+ */
+ if (unlikely(!pmd_present(dst_pmdval) || pmd_trans_huge(dst_pmdval) ||
+ pmd_devmap(dst_pmdval))) {
+ err = -EEXIST;
+ break;
+ }
+ if (unlikely(pmd_bad(dst_pmdval))) {
err = -EFAULT;
break;
}
--
2.34.1
If the directory is corrupted and the number of nlinks is less than 2
(valid nlinks have at least 2), then when the directory is deleted, the
minix_rmdir will try to reduce the nlinks(unsigned int) to a negative
value.
Make nlinks validity check for directories.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable(a)vger.kernel.org
Signed-off-by: Andrey Kriulin <kitotavrik.s(a)gmail.com>
---
v3: Move nlinks validaty check to minix_rmdir and minix_rename per Jan
Kara <jack(a)suse.cz> request.
v2: Move nlinks validaty check to V[12]_minix_iget() per Jan Kara
<jack(a)suse.cz> request. Change return error code to EUCLEAN. Don't block
directory in r/o mode per Al Viro <viro(a)zeniv.linux.org.uk> request.
fs/minix/namei.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index 8938536d8d3c..5a1e5f8ef443 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -161,8 +161,12 @@ static int minix_unlink(struct inode * dir, struct dentry *dentry)
static int minix_rmdir(struct inode * dir, struct dentry *dentry)
{
struct inode * inode = d_inode(dentry);
- int err = -ENOTEMPTY;
+ int err = -EUCLEAN;
+ if (inode->i_nlink < 2)
+ return err;
+
+ err = -ENOTEMPTY;
if (minix_empty_dir(inode)) {
err = minix_unlink(dir, dentry);
if (!err) {
@@ -235,6 +239,10 @@ static int minix_rename(struct mnt_idmap *idmap,
mark_inode_dirty(old_inode);
if (dir_de) {
+ if (old_dir->i_nlink <= 2) {
+ err = -EUCLEAN;
+ goto out_dir;
+ }
err = minix_set_link(dir_de, dir_folio, new_dir);
if (!err)
inode_dec_link_count(old_dir);
--
2.47.2
During an xhci host controller reset (via `USBCMD.HCRST`), reading DWC3
registers can return zero instead of their actual values. This applies
not only to registers within the xhci memory space but also those in
the broader DWC3 IP block.
By default, the xhci driver doesn't wait for the reset handshake to
complete during teardown. This can cause problems when the DWC3 controller
is operating as a dual role device and is switching from host to device
mode, the invalid register read caused by ongoing HCRST could lead to
gadget mode startup failures and unintended register overwrites.
To mitigate this, enable xhci-full-reset-on-remove-quirk to ensure that
xhci_reset() completes its full reset handshake during xhci removal.
Cc: stable(a)vger.kernel.org
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Signed-off-by: Roy Luo <royluo(a)google.com>
---
drivers/usb/dwc3/host.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index b48e108fc8fe..ea865898308f 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -126,7 +126,7 @@ static int dwc3_host_get_irq(struct dwc3 *dwc)
int dwc3_host_init(struct dwc3 *dwc)
{
- struct property_entry props[6];
+ struct property_entry props[7];
struct platform_device *xhci;
int ret, irq;
int prop_idx = 0;
@@ -182,6 +182,9 @@ int dwc3_host_init(struct dwc3 *dwc)
if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A))
props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped");
+ if (dwc->dr_mode == USB_DR_MODE_OTG)
+ props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-full-reset-on-remove-quirk");
+
if (prop_idx) {
ret = device_create_managed_software_node(&xhci->dev, props, NULL);
if (ret) {
--
2.49.0.1112.g889b7c5bd8-goog
Add the correct scale to get temperature in mili degree Celcius.
Add sign component to temperature scan element.
Signed-off-by: Sean Nyekjaer <sean(a)geanix.com>
---
Changes in v4:
- Blindly Copy/Pasted Andy's comment. Use the correct MILLIDEGREE_PER_DEGREE
- Link to v3: https://lore.kernel.org/r/20250505-fxls-v3-0-8c541bf0205c@geanix.com
Changes in v3:
- Dropping define infavor of inline scale value
- Added using constants from units.h
- Tweaked commit msg to make it more assertive
- Link to v2: https://lore.kernel.org/r/20250502-fxls-v2-0-e1af65f1aa6c@geanix.com
Changes in v2:
- Correct offset is applied before scaling component
- Added sign component to temperature scan element
- Link to v1: https://lore.kernel.org/r/20250501-fxls-v1-1-f54061a07099@geanix.com
---
Sean Nyekjaer (2):
iio: accel: fxls8962af: Fix temperature calculation
iio: accel: fxls8962af: Fix temperature scan element sign
drivers/iio/accel/fxls8962af-core.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
---
base-commit: 609bc31eca06c7408e6860d8b46311ebe45c1fef
change-id: 20250501-fxls-307ef3d6d065
Best regards,
--
Sean Nyekjaer <sean(a)geanix.com>
Commit 9c006972c3fe removes the pxd_present() checks because the caller
checks pxd_present(). But, in case of vmap_try_huge_pud(), the caller only
checks pud_present(); pud_free_pmd_page() recurses on each pmd through
pmd_free_pte_page(), wherein the pmd may be none. Thus it is possible to
hit a warning in the latter, since pmd_none => !pmd_table(). Thus, enforce
these checks again through pxd_leaf().
This problem was found by code inspection.
The patch is based on 6.15-rc6.
Fixes: 9c006972c3fe (arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table())
Cc: <stable(a)vger.kernel.org>
Reported-by: Ryan Roberts <ryan.roberts(a)arm.com>
Signed-off-by: Dev Jain <dev.jain(a)arm.com>
---
arch/arm64/mm/mmu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index ea6695d53fb9..3d6789413a9b 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1255,7 +1255,7 @@ int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
pmd = READ_ONCE(*pmdp);
- if (!pmd_table(pmd)) {
+ if (pmd_leaf(pmd)) {
VM_WARN_ON(1);
return 1;
}
@@ -1276,7 +1276,7 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
pud = READ_ONCE(*pudp);
- if (!pud_table(pud)) {
+ if (pud_leaf(pud)) {
VM_WARN_ON(1);
return 1;
}
--
2.30.2
The RK3399 Puma SoM contains the internal Cypress CYUSB3304 USB
hub, that shows instability due to improper reset pin configuration.
Currently reset pin is modeled as a vcc5v0_host regulator, that
might result in too short reset pulse duration.
Starting with the v6.6, the Onboard USB hub driver (later renamed
to Onboard USB dev) contains support for Cypress HX3 hub family.
It can be now used to correctly model the RK3399 Puma SoM hardware.
The first commits in this series fix the onboard USB dev driver to
support all HX3 hub variants, including the CYUSB3304 found in
the RK3399 Puma SoM.
This allows to introduce fix for internal USB hub instability on
RK3399 Puma, by replacing the vcc5v0_host regulator with
cy3304_reset, used inside the hub node.
Please be aware that the patch that fixes USB hub instability in
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi can me merged only
after updating the Onboard USB dev driver, otherwise the hub
will not work.
Two last commits in the series disable unrouted USB controllers
and PHYs on RK3399 Puma SOM and Haikou carrier board, with no
intended functional changes.
This series depends on the patch:
Link: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatible…
("dt-bindings: usb: usb-device: relax compatible pattern to a contains")
Signed-off-by: Lukasz Czechowski <lukasz.czechowski(a)thaumatec.com>
---
Changes in v2:
- Removed additional entries from onboard_dev_match table and
updated dt-bindings list, as suggested by Krzysztof and Conor.
Fallback compatible entry in SoM's dtsi file is used instead.
- Added vdd-supply and vdd2-supply entries to onboard hub nodes
to satisfy bindings checks.
- Changed the default cy3304-reset pin configuration to pcfg_output_high.
- Added dependency to: change-id: 20250415-dt-binding-usb-device-compatibles-188f7b0a81b4
- Link to v1: https://lore.kernel.org/r/20250326-onboard_usb_dev-v1-0-a4b0a5d1b32c@thauma…
---
Lukasz Czechowski (3):
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
Quentin Schulz (2):
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
.../devicetree/bindings/usb/cypress,hx3.yaml | 19 +++++++--
.../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 8 ----
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 48 +++++++++++-----------
drivers/usb/misc/onboard_usb_dev.c | 10 ++++-
4 files changed, 48 insertions(+), 37 deletions(-)
---
base-commit: 834a4a689699090a406d1662b03affa8b155d025
change-id: 20250326-onboard_usb_dev-a7c063a8a515
prerequisite-change-id: 20250415-dt-binding-usb-device-compatibles-188f7b0a81b4:v2
prerequisite-patch-id: f5b90f95302ac9065fbbe5244cc7845c2a772ab6
Best regards,
--
Lukasz Czechowski <lukasz.czechowski(a)thaumatec.com>
If the 'buf' array received from the user contains an empty string, the
'length' variable will be zero. Accessing the 'buf' array element with
index 'length - 1' will result in a buffer overflow.
Add a check for an empty string.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable(a)vger.kernel.org
Signed-off-by: Vladimir Moskovkin <Vladimir.Moskovkin(a)kaspersky.com>
---
drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
index 230e6ee96636..d8f1bf5e58a0 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
@@ -45,7 +45,7 @@ static ssize_t current_password_store(struct kobject *kobj,
int length;
length = strlen(buf);
- if (buf[length-1] == '\n')
+ if (length && buf[length - 1] == '\n')
length--;
/* firmware does verifiation of min/max password length,
--
2.25.1
From: Michael Kelley <mhklinux(a)outlook.com>
Starting with commit dca5161f9bd0 in the 6.3 kernel, the Linux driver
for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
This patch set fixes the root cause of the problem, which is that the
netvsc driver in Linux may send an incorrectly formatted VMBus message
to Hyper-V when transmitting the network packet. The incorrect
formatting occurs when the rndis header of the VMBus message crosses a
page boundary due to how the Linux skb head memory is aligned. In such
a case, two PFNs are required to describe the location of the rndis
header, even though they are contiguous in guest physical address
(GPA) space. Hyper-V requires that two PFNs be in a single "GPA range"
data struture, but current netvsc code puts each PFN in its own GPA
range, which Hyper-V rejects as an error in the case of the rndis
header.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 in the 6.14 kernel, the error occurs much
more frequently in VMs with 16 or more vCPUs. It may occur every few
seconds, or even more frequently, in a ssh session that outputs a lot
of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
One fix is to check for adjacent PFNs in vmbus_sendpacket_pagebuffer()
and just combine them into a single GPA range. Such a fix is very
contained. But conceptually it is fixing the problem at the wrong
level. So this patch set takes the broader approach of maintaining
the already known grouping of contiguous PFNs at a higher level in
the netvsc driver code, and propagating that grouping down to the
creation of the VMBus message to send to Hyper-V. Maintaining the
grouping fixes this problem, and has the added benefit of allowing
netvsc_dma_map() to make fewer calls to dma_map_single() to do bounce
buffering in CoCo VMs.
Patch 1 is a preparatory change to allow vmbus_sendpacket_mpb_desc()
to specify multiple GPA ranges. In current code
vmbus_sendpacket_mpb_desc() is used only by the storvsc synthetic SCSI
driver, and it always creates a single GPA range.
Patch 2 updates the netvsc driver to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(). Because the higher levels of
netvsc still don't group contiguous PFNs, this patch is functionally
neutral. The VMBus message to Hyper-V still has many GPA ranges, each
with a single PFN. But it lays the groundwork for the next patch.
Patch 3 changes the higher levels of netvsc to preserve the already
known grouping of contiguous PFNs. When the contiguous groupings are
passed to vmbus_sendpacket_mpb_desc(), GPA ranges containing multiple
PFNs are produced, as expected by Hyper-V. This is point at which the
core problem is fixed.
Patches 4 and 5 remove code that is no longer necessary after the
previous patches.
These changes provide a net reduction of about 65 lines of code, which
is an added benefit.
These changes have been tested in normal VMs, in SEV-SNP and TDX CoCo
VMs, and in Dv6-series VMs where the netvsp implementation is in the
OpenHCL paravisor instead of the Hyper-V host.
These changes are built against kernel version 6.15-rc6.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
Michael Kelley (5):
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple
ranges
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Remove rmsg_pgcnt
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
drivers/hv/channel.c | 65 ++-----------------------------
drivers/net/hyperv/hyperv_net.h | 13 ++++++-
drivers/net/hyperv/netvsc.c | 57 ++++++++++++++++++++++-----
drivers/net/hyperv/netvsc_drv.c | 62 +++++++----------------------
drivers/net/hyperv/rndis_filter.c | 24 +++---------
drivers/scsi/storvsc_drv.c | 1 +
include/linux/hyperv.h | 7 ----
7 files changed, 83 insertions(+), 146 deletions(-)
--
2.25.1
Microdia JP001 does not support reading the sample rate which leads to
many lines of "cannot get freq at ep 0x84".
This patch adds the USB ID to quirks.c and avoids those error messages.
usb 7-4: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00
usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 7-4: Product: JP001
usb 7-4: Manufacturer: JP001
usb 7-4: SerialNumber: JP001
usb 7-4: 3:1: cannot get freq at ep 0x84
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Nicolas Chauvet <kwizart(a)gmail.com>
---
sound/usb/quirks.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 9112313a9dbc..d3e45240329d 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -2242,6 +2242,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_CTL_MSG_DELAY_1M),
DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */
QUIRK_FLAG_GET_SAMPLE_RATE),
+ DEVICE_FLG(0x0c45, 0x636b, /* Microdia JP001 USB Camera */
+ QUIRK_FLAG_GET_SAMPLE_RATE),
DEVICE_FLG(0x0d8c, 0x0014, /* USB Audio Device */
QUIRK_FLAG_CTL_MSG_DELAY_1M),
DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */
--
2.49.0
Hi All,
Chages since v7:
- drop "unnecessary free pages" optimization
- fix error path page leak
Chages since v6:
- do not unnecessary free pages across iterations
Chages since v5:
- full error message included into commit description
Chages since v4:
- unused pages leak is avoided
Chages since v3:
- pfn_to_virt() changed to page_to_virt() due to compile error
Chages since v2:
- page allocation moved out of the atomic context
Chages since v1:
- Fixes: and -stable tags added to the patch description
Thanks!
Alexander Gordeev (1):
kasan: Avoid sleepable page allocation from atomic context
mm/kasan/shadow.c | 77 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 63 insertions(+), 14 deletions(-)
--
2.45.2
If the directory is corrupted and the number of nlinks is less than 2
(valid nlinks have at least 2), then when the directory is deleted, the
minix_rmdir will try to reduce the nlinks(unsigned int) to a negative
value.
Make nlinks validity check for directory.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable(a)vger.kernel.org
Signed-off-by: Andrey Kriulin <kitotavrik.media(a)gmail.com>
Signed-off-by: Andrey Kriulin <kitotavrik.s(a)gmail.com>
---
v2: Move nlinks validaty check to V[12]_minix_iget() per Jan Kara
<jack(a)suse.cz> request. Change return error code to EUCLEAN. Don't block
directory in r/o mode per Al Viro <viro(a)zeniv.linux.org.uk> request.
fs/minix/inode.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index f007e389d5d2..d815397b8b0d 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -517,6 +517,14 @@ static struct inode *V1_minix_iget(struct inode *inode)
iget_failed(inode);
return ERR_PTR(-ESTALE);
}
+ if (S_ISDIR(raw_inode->i_mode) && raw_inode->i_nlinks < 2) {
+ printk("MINIX-fs: inode directory with corrupted number of links");
+ if (!sb_rdonly(inode->i_sb)) {
+ brelse(bh);
+ iget_failed(inode);
+ return ERR_PTR(-EUCLEAN);
+ }
+ }
inode->i_mode = raw_inode->i_mode;
i_uid_write(inode, raw_inode->i_uid);
i_gid_write(inode, raw_inode->i_gid);
@@ -555,6 +563,14 @@ static struct inode *V2_minix_iget(struct inode *inode)
iget_failed(inode);
return ERR_PTR(-ESTALE);
}
+ if (S_ISDIR(raw_inode->i_mode) && raw_inode->i_nlinks < 2) {
+ printk("MINIX-fs: inode directory with corrupted number of links");
+ if (!sb_rdonly(inode->i_sb)) {
+ brelse(bh);
+ iget_failed(inode);
+ return ERR_PTR(-EUCLEAN);
+ }
+ }
inode->i_mode = raw_inode->i_mode;
i_uid_write(inode, raw_inode->i_uid);
i_gid_write(inode, raw_inode->i_gid);
--
2.47.2
The avs_card_suspend_pre() and avs_card_resume_post() in rt274
calls the snd_soc_card_get_codec_dai(), but does not check its return
value which is a null pointer if the function fails. This can result
in a null pointer dereference. A proper implementation can be found
in acp5x_nau8821_hw_params() and card_suspend_pre().
Add a null pointer check for snd_soc_card_get_codec_dai() to avoid null
pointer dereference when the function fails.
Fixes: a08797afc1f9 ("ASoC: Intel: avs: rt274: Refactor jack handling")
Cc: stable(a)vger.kernel.org # v6.2
Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn>
---
sound/soc/intel/avs/boards/rt274.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/soc/intel/avs/boards/rt274.c b/sound/soc/intel/avs/boards/rt274.c
index 4b6c02a40204..7a8b6ee79f4c 100644
--- a/sound/soc/intel/avs/boards/rt274.c
+++ b/sound/soc/intel/avs/boards/rt274.c
@@ -194,6 +194,11 @@ static int avs_card_suspend_pre(struct snd_soc_card *card)
{
struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, RT274_CODEC_DAI);
+ if (!codec_dai) {
+ dev_err(card->dev, "Codec dai not found\n");
+ return -EINVAL;
+ }
+
return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
}
@@ -202,6 +207,11 @@ static int avs_card_resume_post(struct snd_soc_card *card)
struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, RT274_CODEC_DAI);
struct snd_soc_jack *jack = snd_soc_card_get_drvdata(card);
+ if (!codec_dai) {
+ dev_err(card->dev, "Codec dai not found\n");
+ return -EINVAL;
+ }
+
return snd_soc_component_set_jack(codec_dai->component, jack, NULL);
}
--
2.42.0.windows.2
The function avs_card_suspend_pre() in nau8825 calls the function
snd_soc_card_get_codec_dai(), but does not check its return
value which is a null pointer if the function fails. This can result
in a null pointer dereference. A proper implementation can be found
in acp5x_nau8821_hw_params() and card_suspend_pre().
Add a null pointer check for snd_soc_card_get_codec_dai() to avoid null
pointer dereference when the function fails.
Fixes: 9febcd7a0180 ("ASoC: Intel: avs: nau8825: Refactor jack handling")
Cc: stable(a)vger.kernel.org # v6.2
Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn>
---
sound/soc/intel/avs/boards/nau8825.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/intel/avs/boards/nau8825.c b/sound/soc/intel/avs/boards/nau8825.c
index bf902540744c..5baeb95cd5a6 100644
--- a/sound/soc/intel/avs/boards/nau8825.c
+++ b/sound/soc/intel/avs/boards/nau8825.c
@@ -220,6 +220,11 @@ static int avs_card_suspend_pre(struct snd_soc_card *card)
{
struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI);
+ if (!codec_dai) {
+ dev_err(card->dev, "Codec dai not found\n");
+ return -EINVAL;
+ }
+
return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
}
--
2.42.0.windows.2
Hi,
As an exhibiting company at All-Energy Exhibition and Conference 2025 we have access to the fully updated attendee list, including last-minute registrants who attended the show.
This exclusive list can help you:
✅ Connect with high-intent leads
✅ Follow up with attendees who visited (or missed) your booth
✅ Maximize your ROI from the event
If you're Interested, I’d love to share more details—and I can also provide pricing information.
Looking forward to your thoughts.
Regards,
Jack Reacher
Sr. Marketing Manager
If you do not wish to receive this newsletter reply as "Not interested"
The series contains several small patches to fix various
issues in the pinctrl driver for Armada 3700.
Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com>
---
Changes in v2:
- remove 'stable' and 'Fixes' tags from the error propagating patches
- collect 'Reviewed-by' tags from Andrew
- swap patches 2 and 3 so the bug fix in the latter can be applied cleanly
without depending on the change in the former
- Link to v1: https://lore.kernel.org/r/20250512-pinctrl-a37xx-fixes-v1-0-d470fb1116a5@gm…
---
Gabor Juhos (7):
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 35 ++++++++++++++++-------------
1 file changed, 20 insertions(+), 15 deletions(-)
---
base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3
change-id: 20250512-pinctrl-a37xx-fixes-98fabc45cb11
Best regards,
--
Gabor Juhos <j4g8y7(a)gmail.com>
In some cases, there is a small-time gap in which CMD_RING_BUSY
can be cleared by controller but adding command completion event
to event ring will be delayed. As the result driver will return
error code.
This behavior has been detected on usbtest driver (test 9) with
configuration including ep1in/ep1out bulk and ep2in/ep2out isoc
endpoint.
Probably this gap occurred because controller was busy with adding
some other events to event ring.
The CMD_RING_BUSY is cleared to '0' when the Command Descriptor
has been executed and not when command completion event has been
added to event ring.
To fix this issue for this test the small delay is sufficient
less than 10us) but to make sure the problem doesn't happen again
in the future the patch introduces 10 retries to check with delay
about 20us before returning error code.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable(a)vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell(a)cadence.com>
---
Changelog:
v2:
- replaced usleep_range with udelay
- increased retry counter and decreased the udelay value
drivers/usb/cdns3/cdnsp-gadget.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
index 4824a10df07e..58650b7f4173 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.c
+++ b/drivers/usb/cdns3/cdnsp-gadget.c
@@ -547,6 +547,7 @@ int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev)
dma_addr_t cmd_deq_dma;
union cdnsp_trb *event;
u32 cycle_state;
+ u32 retry = 10;
int ret, val;
u64 cmd_dma;
u32 flags;
@@ -578,8 +579,23 @@ int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev)
flags = le32_to_cpu(event->event_cmd.flags);
/* Check the owner of the TRB. */
- if ((flags & TRB_CYCLE) != cycle_state)
+ if ((flags & TRB_CYCLE) != cycle_state) {
+ /*
+ * Give some extra time to get chance controller
+ * to finish command before returning error code.
+ * Checking CMD_RING_BUSY is not sufficient because
+ * this bit is cleared to '0' when the Command
+ * Descriptor has been executed by controller
+ * and not when command completion event has
+ * be added to event ring.
+ */
+ if (retry--) {
+ udelay(20);
+ continue;
+ }
+
return -EINVAL;
+ }
cmd_dma = le64_to_cpu(event->event_cmd.cmd_trb);
--
2.43.0
In xe_vm_close_and_put() we need to be able to call
flush_work(rebind_work), however during vm creation we can call this on
the error path, before having actually set up the worker, leading to a
splat from flush_work().
It looks like we can simply move the worker init step earlier to fix
this.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld(a)intel.com>
Cc: Matthew Brost <matthew.brost(a)intel.com>
Cc: <stable(a)vger.kernel.org> # v6.8+
---
drivers/gpu/drm/xe/xe_vm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c
index 5a978da411b0..168756fb140b 100644
--- a/drivers/gpu/drm/xe/xe_vm.c
+++ b/drivers/gpu/drm/xe/xe_vm.c
@@ -1704,8 +1704,10 @@ struct xe_vm *xe_vm_create(struct xe_device *xe, u32 flags)
* scheduler drops all the references of it, hence protecting the VM
* for this case is necessary.
*/
- if (flags & XE_VM_FLAG_LR_MODE)
+ if (flags & XE_VM_FLAG_LR_MODE) {
+ INIT_WORK(&vm->preempt.rebind_work, preempt_rebind_work_func);
xe_pm_runtime_get_noresume(xe);
+ }
vm_resv_obj = drm_gpuvm_resv_object_alloc(&xe->drm);
if (!vm_resv_obj) {
@@ -1750,10 +1752,8 @@ struct xe_vm *xe_vm_create(struct xe_device *xe, u32 flags)
vm->batch_invalidate_tlb = true;
}
- if (vm->flags & XE_VM_FLAG_LR_MODE) {
- INIT_WORK(&vm->preempt.rebind_work, preempt_rebind_work_func);
+ if (vm->flags & XE_VM_FLAG_LR_MODE)
vm->batch_invalidate_tlb = false;
- }
/* Fill pt_root after allocating scratch tables */
for_each_tile(tile, xe, id) {
--
2.49.0
This patch series is to fix OF device node refcount leakage for
- of_irq_parse_and_map_pci()
- of_pci_prop_intr_map()
Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com>
---
Zijun Hu (2):
PCI: of: Fix OF device node refcount leakage in API of_irq_parse_and_map_pci()
PCI: of: Fix OF device node refcount leakages in of_pci_prop_intr_map()
drivers/pci/of.c | 2 ++
drivers/pci/of_property.c | 20 +++++++++++---------
2 files changed, 13 insertions(+), 9 deletions(-)
---
base-commit: 7d06015d936c861160803e020f68f413b5c3cd9d
change-id: 20250407-fix_of_pci-20b45dcc26b5
Best regards,
--
Zijun Hu <quic_zijuhu(a)quicinc.com>
The patch titled
Subject: highmem: add folio_test_partial_kmap()
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
highmem-add-folio_test_partial_kmap.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche…
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: "Matthew Wilcox (Oracle)" <willy(a)infradead.org>
Subject: highmem: add folio_test_partial_kmap()
Date: Wed, 14 May 2025 18:06:02 +0100
In commit c749d9b7ebbc (iov_iter: fix copy_page_from_iter_atomic() if
KMAP_LOCAL_FORCE_MAP), Hugh correctly noted that if KMAP_LOCAL_FORCE_MAP
is enabled, we must limit ourselves to PAGE_SIZE bytes per call to
kmap_local(). The same problem exists in memcpy_from_folio(),
memcpy_to_folio(), folio_zero_tail(), folio_fill_tail() and
memcpy_from_file_folio(), so add folio_test_partial_kmap() to do this more
succinctly.
Link: https://lkml.kernel.org/r/20250514170607.3000994-2-willy@infradead.org
Fixes: 00cdf76012ab ("mm: add memcpy_from_file_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy(a)infradead.org>
Cc: Al Viro <viro(a)zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd(a)google.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
include/linux/highmem.h | 10 +++++-----
include/linux/page-flags.h | 7 +++++++
2 files changed, 12 insertions(+), 5 deletions(-)
--- a/include/linux/highmem.h~highmem-add-folio_test_partial_kmap
+++ a/include/linux/highmem.h
@@ -461,7 +461,7 @@ static inline void memcpy_from_folio(cha
const char *from = kmap_local_folio(folio, offset);
size_t chunk = len;
- if (folio_test_highmem(folio) &&
+ if (folio_test_partial_kmap(folio) &&
chunk > PAGE_SIZE - offset_in_page(offset))
chunk = PAGE_SIZE - offset_in_page(offset);
memcpy(to, from, chunk);
@@ -489,7 +489,7 @@ static inline void memcpy_to_folio(struc
char *to = kmap_local_folio(folio, offset);
size_t chunk = len;
- if (folio_test_highmem(folio) &&
+ if (folio_test_partial_kmap(folio) &&
chunk > PAGE_SIZE - offset_in_page(offset))
chunk = PAGE_SIZE - offset_in_page(offset);
memcpy(to, from, chunk);
@@ -522,7 +522,7 @@ static inline __must_check void *folio_z
{
size_t len = folio_size(folio) - offset;
- if (folio_test_highmem(folio)) {
+ if (folio_test_partial_kmap(folio)) {
size_t max = PAGE_SIZE - offset_in_page(offset);
while (len > max) {
@@ -560,7 +560,7 @@ static inline void folio_fill_tail(struc
VM_BUG_ON(offset + len > folio_size(folio));
- if (folio_test_highmem(folio)) {
+ if (folio_test_partial_kmap(folio)) {
size_t max = PAGE_SIZE - offset_in_page(offset);
while (len > max) {
@@ -597,7 +597,7 @@ static inline size_t memcpy_from_file_fo
size_t offset = offset_in_folio(folio, pos);
char *from = kmap_local_folio(folio, offset);
- if (folio_test_highmem(folio)) {
+ if (folio_test_partial_kmap(folio)) {
offset = offset_in_page(offset);
len = min_t(size_t, len, PAGE_SIZE - offset);
} else
--- a/include/linux/page-flags.h~highmem-add-folio_test_partial_kmap
+++ a/include/linux/page-flags.h
@@ -615,6 +615,13 @@ FOLIO_FLAG(dropbehind, FOLIO_HEAD_PAGE)
PAGEFLAG_FALSE(HighMem, highmem)
#endif
+/* Does kmap_local_folio() only allow access to one page of the folio? */
+#ifdef CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
+#define folio_test_partial_kmap(f) true
+#else
+#define folio_test_partial_kmap(f) folio_test_highmem(f)
+#endif
+
#ifdef CONFIG_SWAP
static __always_inline bool folio_test_swapcache(const struct folio *folio)
{
_
Patches currently in -mm which might be from willy(a)infradead.org are
highmem-add-folio_test_partial_kmap.patch
mm-rename-page-index-to-page-__folio_index.patch
Two of the patches are older rethunk fixes and one is a build fix for
CONFIG_MODULES=n.
---
Borislav Petkov (AMD) (1):
x86/alternative: Optimize returns patching
Eric Biggers (1):
x86/its: Fix build errors when CONFIG_MODULES=n
Josh Poimboeuf (1):
x86/alternatives: Remove faulty optimization
arch/x86/kernel/alternative.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
---
change-id: 20250513-its-fixes-6-1-d21ce20b0d1d
From: Shravya KN <shravya.k-n(a)broadcom.com>
[ Upstream commit 3051a77a09dfe3022aa012071346937fdf059033 ]
The MTU setting at the time an XDP multi-buffer is attached
determines whether the aggregation ring will be used and the
rx_skb_func handler. This is done in bnxt_set_rx_skb_mode().
If the MTU is later changed, the aggregation ring setting may need
to be changed and it may become out-of-sync with the settings
initially done in bnxt_set_rx_skb_mode(). This may result in
random memory corruption and crashes as the HW may DMA data larger
than the allocated buffer size, such as:
BUG: kernel NULL pointer dereference, address: 00000000000003c0
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1
Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021
RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en]
Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f
RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202
RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff
RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380
RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf
R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980
R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990
FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
__bnxt_poll_work+0x1c2/0x3e0 [bnxt_en]
To address the issue, we now call bnxt_set_rx_skb_mode() within
bnxt_change_mtu() to properly set the AGG rings configuration and
update rx_skb_func based on the new MTU value.
Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of
bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on
the current MTU.
Fixes: 08450ea98ae9 ("bnxt_en: Fix max_mtu setting for multi-buf XDP")
Co-developed-by: Somnath Kotur <somnath.kotur(a)broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur(a)broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n(a)broadcom.com>
Signed-off-by: Michael Chan <michael.chan(a)broadcom.com>
Signed-off-by: Paolo Abeni <pabeni(a)redhat.com>
Signed-off-by: Zhaoyang Li <lizy04(a)hust.edu.cn>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 393a983f6d69..6b1245a3ab4b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4041,7 +4041,7 @@ int bnxt_set_rx_skb_mode(struct bnxt *bp, bool page_mode)
struct net_device *dev = bp->dev;
if (page_mode) {
- bp->flags &= ~BNXT_FLAG_AGG_RINGS;
+ bp->flags &= ~(BNXT_FLAG_AGG_RINGS | BNXT_FLAG_NO_AGG_RINGS);
bp->flags |= BNXT_FLAG_RX_PAGE_MODE;
if (bp->xdp_prog->aux->xdp_has_frags)
@@ -12799,6 +12799,14 @@ static int bnxt_change_mtu(struct net_device *dev, int new_mtu)
bnxt_close_nic(bp, true, false);
dev->mtu = new_mtu;
+
+ /* MTU change may change the AGG ring settings if an XDP multi-buffer
+ * program is attached. We need to set the AGG rings settings and
+ * rx_skb_func accordingly.
+ */
+ if (READ_ONCE(bp->xdp_prog))
+ bnxt_set_rx_skb_mode(bp, true);
+
bnxt_set_ring_params(bp);
if (netif_running(dev))
--
2.25.1
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 03552d8ac0afcc080c339faa0b726e2c0e9361cb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051239-ceremony-rehab-8e6c@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 03552d8ac0afcc080c339faa0b726e2c0e9361cb Mon Sep 17 00:00:00 2001
From: Daniele Ceraolo Spurio <daniele.ceraolospurio(a)intel.com>
Date: Fri, 2 May 2025 08:51:04 -0700
Subject: [PATCH] drm/xe/gsc: do not flush the GSC worker from the reset path
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio(a)intel.com>
Cc: John Harrison <John.C.Harrison(a)Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis(a)intel.com>
Cc: <stable(a)vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk(a)intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@in…
(cherry picked from commit 12370bfcc4f0bdf70279ec5b570eb298963422b5)
Signed-off-by: Lucas De Marchi <lucas.demarchi(a)intel.com>
diff --git a/drivers/gpu/drm/xe/xe_gsc.c b/drivers/gpu/drm/xe/xe_gsc.c
index fd41113f8572..0bcf97063ff6 100644
--- a/drivers/gpu/drm/xe/xe_gsc.c
+++ b/drivers/gpu/drm/xe/xe_gsc.c
@@ -555,6 +555,28 @@ void xe_gsc_wait_for_worker_completion(struct xe_gsc *gsc)
flush_work(&gsc->work);
}
+void xe_gsc_stop_prepare(struct xe_gsc *gsc)
+{
+ struct xe_gt *gt = gsc_to_gt(gsc);
+ int ret;
+
+ if (!xe_uc_fw_is_loadable(&gsc->fw) || xe_uc_fw_is_in_error_state(&gsc->fw))
+ return;
+
+ xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GSC);
+
+ /*
+ * If the GSC FW load or the proxy init are interrupted, the only way
+ * to recover it is to do an FLR and reload the GSC from scratch.
+ * Therefore, let's wait for the init to complete before stopping
+ * operations. The proxy init is the last step, so we can just wait on
+ * that
+ */
+ ret = xe_gsc_wait_for_proxy_init_done(gsc);
+ if (ret)
+ xe_gt_err(gt, "failed to wait for GSC init completion before uc stop\n");
+}
+
/*
* wa_14015076503: if the GSC FW is loaded, we need to alert it before doing a
* GSC engine reset by writing a notification bit in the GS1 register and then
diff --git a/drivers/gpu/drm/xe/xe_gsc.h b/drivers/gpu/drm/xe/xe_gsc.h
index d99f66c38075..b8b8e0810ad9 100644
--- a/drivers/gpu/drm/xe/xe_gsc.h
+++ b/drivers/gpu/drm/xe/xe_gsc.h
@@ -16,6 +16,7 @@ struct xe_hw_engine;
int xe_gsc_init(struct xe_gsc *gsc);
int xe_gsc_init_post_hwconfig(struct xe_gsc *gsc);
void xe_gsc_wait_for_worker_completion(struct xe_gsc *gsc);
+void xe_gsc_stop_prepare(struct xe_gsc *gsc);
void xe_gsc_load_start(struct xe_gsc *gsc);
void xe_gsc_hwe_irq_handler(struct xe_hw_engine *hwe, u16 intr_vec);
diff --git a/drivers/gpu/drm/xe/xe_gsc_proxy.c b/drivers/gpu/drm/xe/xe_gsc_proxy.c
index 8cf70b228ff3..d0519cd6704a 100644
--- a/drivers/gpu/drm/xe/xe_gsc_proxy.c
+++ b/drivers/gpu/drm/xe/xe_gsc_proxy.c
@@ -71,6 +71,17 @@ bool xe_gsc_proxy_init_done(struct xe_gsc *gsc)
HECI1_FWSTS1_PROXY_STATE_NORMAL;
}
+int xe_gsc_wait_for_proxy_init_done(struct xe_gsc *gsc)
+{
+ struct xe_gt *gt = gsc_to_gt(gsc);
+
+ /* Proxy init can take up to 500ms, so wait double that for safety */
+ return xe_mmio_wait32(>->mmio, HECI_FWSTS1(MTL_GSC_HECI1_BASE),
+ HECI1_FWSTS1_CURRENT_STATE,
+ HECI1_FWSTS1_PROXY_STATE_NORMAL,
+ USEC_PER_SEC, NULL, false);
+}
+
static void __gsc_proxy_irq_rmw(struct xe_gsc *gsc, u32 clr, u32 set)
{
struct xe_gt *gt = gsc_to_gt(gsc);
diff --git a/drivers/gpu/drm/xe/xe_gsc_proxy.h b/drivers/gpu/drm/xe/xe_gsc_proxy.h
index fdef56995cd4..765602221dbc 100644
--- a/drivers/gpu/drm/xe/xe_gsc_proxy.h
+++ b/drivers/gpu/drm/xe/xe_gsc_proxy.h
@@ -12,6 +12,7 @@ struct xe_gsc;
int xe_gsc_proxy_init(struct xe_gsc *gsc);
bool xe_gsc_proxy_init_done(struct xe_gsc *gsc);
+int xe_gsc_wait_for_proxy_init_done(struct xe_gsc *gsc);
int xe_gsc_proxy_start(struct xe_gsc *gsc);
int xe_gsc_proxy_request_handler(struct xe_gsc *gsc);
diff --git a/drivers/gpu/drm/xe/xe_gt.c b/drivers/gpu/drm/xe/xe_gt.c
index 10a9e3c72b36..66198cf2662c 100644
--- a/drivers/gpu/drm/xe/xe_gt.c
+++ b/drivers/gpu/drm/xe/xe_gt.c
@@ -857,7 +857,7 @@ void xe_gt_suspend_prepare(struct xe_gt *gt)
fw_ref = xe_force_wake_get(gt_to_fw(gt), XE_FORCEWAKE_ALL);
- xe_uc_stop_prepare(>->uc);
+ xe_uc_suspend_prepare(>->uc);
xe_force_wake_put(gt_to_fw(gt), fw_ref);
}
diff --git a/drivers/gpu/drm/xe/xe_uc.c b/drivers/gpu/drm/xe/xe_uc.c
index c14bd2282044..3a8751a8b92d 100644
--- a/drivers/gpu/drm/xe/xe_uc.c
+++ b/drivers/gpu/drm/xe/xe_uc.c
@@ -244,7 +244,7 @@ void xe_uc_gucrc_disable(struct xe_uc *uc)
void xe_uc_stop_prepare(struct xe_uc *uc)
{
- xe_gsc_wait_for_worker_completion(&uc->gsc);
+ xe_gsc_stop_prepare(&uc->gsc);
xe_guc_stop_prepare(&uc->guc);
}
@@ -278,6 +278,12 @@ static void uc_reset_wait(struct xe_uc *uc)
goto again;
}
+void xe_uc_suspend_prepare(struct xe_uc *uc)
+{
+ xe_gsc_wait_for_worker_completion(&uc->gsc);
+ xe_guc_stop_prepare(&uc->guc);
+}
+
int xe_uc_suspend(struct xe_uc *uc)
{
/* GuC submission not enabled, nothing to do */
diff --git a/drivers/gpu/drm/xe/xe_uc.h b/drivers/gpu/drm/xe/xe_uc.h
index 3813c1ede450..c23e6f5e2514 100644
--- a/drivers/gpu/drm/xe/xe_uc.h
+++ b/drivers/gpu/drm/xe/xe_uc.h
@@ -18,6 +18,7 @@ int xe_uc_reset_prepare(struct xe_uc *uc);
void xe_uc_stop_prepare(struct xe_uc *uc);
void xe_uc_stop(struct xe_uc *uc);
int xe_uc_start(struct xe_uc *uc);
+void xe_uc_suspend_prepare(struct xe_uc *uc);
int xe_uc_suspend(struct xe_uc *uc);
int xe_uc_sanitize_reset(struct xe_uc *uc);
void xe_uc_declare_wedged(struct xe_uc *uc);
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x f31fe8165d365379d858c53bef43254c7d6d1cfd
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051209-overturn-supreme-26f1@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f31fe8165d365379d858c53bef43254c7d6d1cfd Mon Sep 17 00:00:00 2001
From: Naman Jain <namjain(a)linux.microsoft.com>
Date: Fri, 2 May 2025 13:18:10 +0530
Subject: [PATCH] uio_hv_generic: Fix sysfs creation path for ring buffer
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes: 9ab877a6ccf8 ("uio_hv_generic: make ring buffer attribute for primary channel")
Cc: stable(a)kernel.org
Suggested-by: Saurabh Sengar <ssengar(a)linux.microsoft.com>
Suggested-by: Michael Kelley <mhklinux(a)outlook.com>
Reviewed-by: Michael Kelley <mhklinux(a)outlook.com>
Tested-by: Michael Kelley <mhklinux(a)outlook.com>
Reviewed-by: Dexuan Cui <decui(a)microsoft.com>
Signed-off-by: Naman Jain <namjain(a)linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 29780f3a7478..0b450e53161e 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -477,4 +477,10 @@ static inline int hv_debug_add_dev_dir(struct hv_device *dev)
#endif /* CONFIG_HYPERV_TESTING */
+/* Create and remove sysfs entry for memory mapped ring buffers for a channel */
+int hv_create_ring_sysfs(struct vmbus_channel *channel,
+ int (*hv_mmap_ring_buffer)(struct vmbus_channel *channel,
+ struct vm_area_struct *vma));
+int hv_remove_ring_sysfs(struct vmbus_channel *channel);
+
#endif /* _HYPERV_VMBUS_H */
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 8d3cff42bdbb..0f16a83cc2d6 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1802,6 +1802,27 @@ static ssize_t subchannel_id_show(struct vmbus_channel *channel,
}
static VMBUS_CHAN_ATTR_RO(subchannel_id);
+static int hv_mmap_ring_buffer_wrapper(struct file *filp, struct kobject *kobj,
+ const struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ struct vmbus_channel *channel = container_of(kobj, struct vmbus_channel, kobj);
+
+ /*
+ * hv_(create|remove)_ring_sysfs implementation ensures that mmap_ring_buffer
+ * is not NULL.
+ */
+ return channel->mmap_ring_buffer(channel, vma);
+}
+
+static struct bin_attribute chan_attr_ring_buffer = {
+ .attr = {
+ .name = "ring",
+ .mode = 0600,
+ },
+ .size = 2 * SZ_2M,
+ .mmap = hv_mmap_ring_buffer_wrapper,
+};
static struct attribute *vmbus_chan_attrs[] = {
&chan_attr_out_mask.attr,
&chan_attr_in_mask.attr,
@@ -1821,6 +1842,11 @@ static struct attribute *vmbus_chan_attrs[] = {
NULL
};
+static struct bin_attribute *vmbus_chan_bin_attrs[] = {
+ &chan_attr_ring_buffer,
+ NULL
+};
+
/*
* Channel-level attribute_group callback function. Returns the permission for
* each attribute, and returns 0 if an attribute is not visible.
@@ -1841,9 +1867,24 @@ static umode_t vmbus_chan_attr_is_visible(struct kobject *kobj,
return attr->mode;
}
+static umode_t vmbus_chan_bin_attr_is_visible(struct kobject *kobj,
+ const struct bin_attribute *attr, int idx)
+{
+ const struct vmbus_channel *channel =
+ container_of(kobj, struct vmbus_channel, kobj);
+
+ /* Hide ring attribute if channel's ring_sysfs_visible is set to false */
+ if (attr == &chan_attr_ring_buffer && !channel->ring_sysfs_visible)
+ return 0;
+
+ return attr->attr.mode;
+}
+
static const struct attribute_group vmbus_chan_group = {
.attrs = vmbus_chan_attrs,
- .is_visible = vmbus_chan_attr_is_visible
+ .bin_attrs = vmbus_chan_bin_attrs,
+ .is_visible = vmbus_chan_attr_is_visible,
+ .is_bin_visible = vmbus_chan_bin_attr_is_visible,
};
static const struct kobj_type vmbus_chan_ktype = {
@@ -1851,6 +1892,63 @@ static const struct kobj_type vmbus_chan_ktype = {
.release = vmbus_chan_release,
};
+/**
+ * hv_create_ring_sysfs() - create "ring" sysfs entry corresponding to ring buffers for a channel.
+ * @channel: Pointer to vmbus_channel structure
+ * @hv_mmap_ring_buffer: function pointer for initializing the function to be called on mmap of
+ * channel's "ring" sysfs node, which is for the ring buffer of that channel.
+ * Function pointer is of below type:
+ * int (*hv_mmap_ring_buffer)(struct vmbus_channel *channel,
+ * struct vm_area_struct *vma))
+ * This has a pointer to the channel and a pointer to vm_area_struct,
+ * used for mmap, as arguments.
+ *
+ * Sysfs node for ring buffer of a channel is created along with other fields, however its
+ * visibility is disabled by default. Sysfs creation needs to be controlled when the use-case
+ * is running.
+ * For example, HV_NIC device is used either by uio_hv_generic or hv_netvsc at any given point of
+ * time, and "ring" sysfs is needed only when uio_hv_generic is bound to that device. To avoid
+ * exposing the ring buffer by default, this function is reponsible to enable visibility of
+ * ring for userspace to use.
+ * Note: Race conditions can happen with userspace and it is not encouraged to create new
+ * use-cases for this. This was added to maintain backward compatibility, while solving
+ * one of the race conditions in uio_hv_generic while creating sysfs.
+ *
+ * Returns 0 on success or error code on failure.
+ */
+int hv_create_ring_sysfs(struct vmbus_channel *channel,
+ int (*hv_mmap_ring_buffer)(struct vmbus_channel *channel,
+ struct vm_area_struct *vma))
+{
+ struct kobject *kobj = &channel->kobj;
+
+ channel->mmap_ring_buffer = hv_mmap_ring_buffer;
+ channel->ring_sysfs_visible = true;
+
+ return sysfs_update_group(kobj, &vmbus_chan_group);
+}
+EXPORT_SYMBOL_GPL(hv_create_ring_sysfs);
+
+/**
+ * hv_remove_ring_sysfs() - remove ring sysfs entry corresponding to ring buffers for a channel.
+ * @channel: Pointer to vmbus_channel structure
+ *
+ * Hide "ring" sysfs for a channel by changing its is_visible attribute and updating sysfs group.
+ *
+ * Returns 0 on success or error code on failure.
+ */
+int hv_remove_ring_sysfs(struct vmbus_channel *channel)
+{
+ struct kobject *kobj = &channel->kobj;
+ int ret;
+
+ channel->ring_sysfs_visible = false;
+ ret = sysfs_update_group(kobj, &vmbus_chan_group);
+ channel->mmap_ring_buffer = NULL;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hv_remove_ring_sysfs);
+
/*
* vmbus_add_channel_kobj - setup a sub-directory under device/channels
*/
diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
index 1b19b5647495..69c1df0f4ca5 100644
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -131,15 +131,12 @@ static void hv_uio_rescind(struct vmbus_channel *channel)
vmbus_device_unregister(channel->device_obj);
}
-/* Sysfs API to allow mmap of the ring buffers
+/* Function used for mmap of ring buffer sysfs interface.
* The ring buffer is allocated as contiguous memory by vmbus_open
*/
-static int hv_uio_ring_mmap(struct file *filp, struct kobject *kobj,
- const struct bin_attribute *attr,
- struct vm_area_struct *vma)
+static int
+hv_uio_ring_mmap(struct vmbus_channel *channel, struct vm_area_struct *vma)
{
- struct vmbus_channel *channel
- = container_of(kobj, struct vmbus_channel, kobj);
void *ring_buffer = page_address(channel->ringbuffer_page);
if (channel->state != CHANNEL_OPENED_STATE)
@@ -149,15 +146,6 @@ static int hv_uio_ring_mmap(struct file *filp, struct kobject *kobj,
channel->ringbuffer_pagecount << PAGE_SHIFT);
}
-static const struct bin_attribute ring_buffer_bin_attr = {
- .attr = {
- .name = "ring",
- .mode = 0600,
- },
- .size = 2 * SZ_2M,
- .mmap = hv_uio_ring_mmap,
-};
-
/* Callback from VMBUS subsystem when new channel created. */
static void
hv_uio_new_channel(struct vmbus_channel *new_sc)
@@ -178,8 +166,7 @@ hv_uio_new_channel(struct vmbus_channel *new_sc)
/* Disable interrupts on sub channel */
new_sc->inbound.ring_buffer->interrupt_mask = 1;
set_channel_read_mode(new_sc, HV_CALL_ISR);
-
- ret = sysfs_create_bin_file(&new_sc->kobj, &ring_buffer_bin_attr);
+ ret = hv_create_ring_sysfs(new_sc, hv_uio_ring_mmap);
if (ret) {
dev_err(device, "sysfs create ring bin file failed; %d\n", ret);
vmbus_close(new_sc);
@@ -350,10 +337,18 @@ hv_uio_probe(struct hv_device *dev,
goto fail_close;
}
- ret = sysfs_create_bin_file(&channel->kobj, &ring_buffer_bin_attr);
- if (ret)
- dev_notice(&dev->device,
- "sysfs create ring bin file failed; %d\n", ret);
+ /*
+ * This internally calls sysfs_update_group, which returns a non-zero value if it executes
+ * before sysfs_create_group. This is expected as the 'ring' will be created later in
+ * vmbus_device_register() -> vmbus_add_channel_kobj(). Thus, no need to check the return
+ * value and print warning.
+ *
+ * Creating/exposing sysfs in driver probe is not encouraged as it can lead to race
+ * conditions with userspace. For backward compatibility, "ring" sysfs could not be removed
+ * or decoupled from uio_hv_generic probe. Userspace programs can make use of inotify
+ * APIs to make sure that ring is created.
+ */
+ hv_create_ring_sysfs(channel, hv_uio_ring_mmap);
hv_set_drvdata(dev, pdata);
@@ -375,7 +370,7 @@ hv_uio_remove(struct hv_device *dev)
if (!pdata)
return;
- sysfs_remove_bin_file(&dev->channel->kobj, &ring_buffer_bin_attr);
+ hv_remove_ring_sysfs(dev->channel);
uio_unregister_device(&pdata->info);
hv_uio_cleanup(dev, pdata);
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 675959fb97ba..d6ffe01962c2 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1002,6 +1002,12 @@ struct vmbus_channel {
/* The max size of a packet on this channel */
u32 max_pkt_size;
+
+ /* function to mmap ring buffer memory to the channel's sysfs ring attribute */
+ int (*mmap_ring_buffer)(struct vmbus_channel *channel, struct vm_area_struct *vma);
+
+ /* boolean to control visibility of sysfs for ring buffer */
+ bool ring_sysfs_visible;
};
#define lock_requestor(channel, flags) \
From: Nick Child <nnac123(a)linux.ibm.com>
[ Upstream commit bdf5d13aa05ec314d4385b31ac974d6c7e0997c9 ]
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123(a)linux.ibm.com>
Reviewed-by: Simon Horman <horms(a)kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
drivers/net/ethernet/ibm/ibmvnic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 7f4539a2e551..4b87d9f59628 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1758,6 +1758,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
dma_addr_t data_dma_addr;
struct netdev_queue *txq;
unsigned long lpar_rc;
+ unsigned int skblen;
union sub_crq tx_crq;
unsigned int offset;
int num_entries = 1;
@@ -1843,6 +1844,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_buff->skb = skb;
tx_buff->index = index;
tx_buff->pool_index = queue_num;
+ skblen = skb->len;
memset(&tx_crq, 0, sizeof(tx_crq));
tx_crq.v1.first = IBMVNIC_CRQ_CMD;
@@ -1919,7 +1921,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
}
tx_packets++;
- tx_bytes += skb->len;
+ tx_bytes += skblen;
txq->trans_start = jiffies;
ret = NETDEV_TX_OK;
goto out;
--
2.34.1
From: Nick Child <nnac123(a)linux.ibm.com>
[ Upstream commit bdf5d13aa05ec314d4385b31ac974d6c7e0997c9 ]
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123(a)linux.ibm.com>
Reviewed-by: Simon Horman <horms(a)kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
drivers/net/ethernet/ibm/ibmvnic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 84da6ccaf339..73e3165aa9ae 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1548,6 +1548,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
dma_addr_t data_dma_addr;
struct netdev_queue *txq;
unsigned long lpar_rc;
+ unsigned int skblen;
union sub_crq tx_crq;
unsigned int offset;
int num_entries = 1;
@@ -1631,6 +1632,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_buff->index = index;
tx_buff->pool_index = queue_num;
tx_buff->last_frag = true;
+ skblen = skb->len;
memset(&tx_crq, 0, sizeof(tx_crq));
tx_crq.v1.first = IBMVNIC_CRQ_CMD;
@@ -1733,7 +1735,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
}
tx_packets++;
- tx_bytes += skb->len;
+ tx_bytes += skblen;
txq->trans_start = jiffies;
ret = NETDEV_TX_OK;
goto out;
--
2.34.1
[ Upstream commit cab63934c33b12c0d1e9f4da7450928057f2c142 ]
Backport for linux-6.12.y stable
6.12 kernel used older poll_interval of 1ms instead of 0 as described
in the original commit message below.
CPU hogging is not that bad with 1ms delay, fix it anyways, but don't
touch poll_interval.
Event polling delay is set to 0 if there are any pending requests in
either rx or tx requests lists. Checking for pending requests does
not work well for "IN" transfers as the tty driver always queues
requests to the list and TRBs to the ring, preparing to receive data
from the host.
This causes unnecessary busylooping and cpu hogging.
Only set the event polling delay to 0 if there are pending tx "write"
transfers, or if it was less than 10ms since last active data transfer
in any direction.
Cc: Łukasz Bartosik <ukaszb(a)chromium.org>
Fixes: fb18e5bb9660 ("xhci: dbc: poll at different rate depending on data transfer activity")
Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com>
---
drivers/usb/host/xhci-dbgcap.c | 19 ++++++++++++++++---
drivers/usb/host/xhci-dbgcap.h | 3 +++
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 241d7aa1fbc2..b12273f72c93 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -822,6 +822,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
{
dma_addr_t deq;
union xhci_trb *evt;
+ enum evtreturn ret = EVT_DONE;
u32 ctrl, portsc;
bool update_erdp = false;
@@ -906,6 +907,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
break;
case TRB_TYPE(TRB_TRANSFER):
dbc_handle_xfer_event(dbc, evt);
+ ret = EVT_XFER_DONE;
break;
default:
break;
@@ -924,7 +926,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
lo_hi_writeq(deq, &dbc->regs->erdp);
}
- return EVT_DONE;
+ return ret;
}
static void xhci_dbc_handle_events(struct work_struct *work)
@@ -933,6 +935,7 @@ static void xhci_dbc_handle_events(struct work_struct *work)
struct xhci_dbc *dbc;
unsigned long flags;
unsigned int poll_interval;
+ unsigned long busypoll_timelimit;
dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work);
poll_interval = dbc->poll_interval;
@@ -951,11 +954,21 @@ static void xhci_dbc_handle_events(struct work_struct *work)
dbc->driver->disconnect(dbc);
break;
case EVT_DONE:
- /* set fast poll rate if there are pending data transfers */
+ /*
+ * Set fast poll rate if there are pending out transfers, or
+ * a transfer was recently processed
+ */
+ busypoll_timelimit = dbc->xfer_timestamp +
+ msecs_to_jiffies(DBC_XFER_INACTIVITY_TIMEOUT);
+
if (!list_empty(&dbc->eps[BULK_OUT].list_pending) ||
- !list_empty(&dbc->eps[BULK_IN].list_pending))
+ time_is_after_jiffies(busypoll_timelimit))
poll_interval = 1;
break;
+ case EVT_XFER_DONE:
+ dbc->xfer_timestamp = jiffies;
+ poll_interval = 1;
+ break;
default:
dev_info(dbc->dev, "stop handling dbc events\n");
return;
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 9dc8f4d8077c..47ac72c2286d 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -96,6 +96,7 @@ struct dbc_ep {
#define DBC_WRITE_BUF_SIZE 8192
#define DBC_POLL_INTERVAL_DEFAULT 64 /* milliseconds */
#define DBC_POLL_INTERVAL_MAX 5000 /* milliseconds */
+#define DBC_XFER_INACTIVITY_TIMEOUT 10 /* milliseconds */
/*
* Private structure for DbC hardware state:
*/
@@ -142,6 +143,7 @@ struct xhci_dbc {
enum dbc_state state;
struct delayed_work event_work;
unsigned int poll_interval; /* ms */
+ unsigned long xfer_timestamp;
unsigned resume_required:1;
struct dbc_ep eps[2];
@@ -187,6 +189,7 @@ struct dbc_request {
enum evtreturn {
EVT_ERR = -1,
EVT_DONE,
+ EVT_XFER_DONE,
EVT_GSER,
EVT_DISC,
};
--
2.43.0
From: "Maciej S. Szmigiero" <mail(a)maciej.szmigiero.name>
[ Upstream commit dd410d784402c5775f66faf8b624e85e41c38aaf ]
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello(a)amd.com>
Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.17361846…
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com>
Signed-off-by: Zhaoyang Li <lizy04(a)hust.edu.cn>
---
drivers/platform/x86/amd/pmc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/amd/pmc.c b/drivers/platform/x86/amd/pmc.c
index f237c1ea8d35..8eaeb1e8f975 100644
--- a/drivers/platform/x86/amd/pmc.c
+++ b/drivers/platform/x86/amd/pmc.c
@@ -834,6 +834,10 @@ static int __maybe_unused amd_pmc_suspend_handler(struct device *dev)
{
struct amd_pmc_dev *pdev = dev_get_drvdata(dev);
+ /*
+ * Must be called only from the same set of dev_pm_ops handlers
+ * as i8042_pm_suspend() is called: currently just from .suspend.
+ */
if (pdev->cpu_id == AMD_CPU_ID_CZN) {
int rc = amd_pmc_czn_wa_irq1(pdev);
@@ -846,7 +850,9 @@ static int __maybe_unused amd_pmc_suspend_handler(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(amd_pmc_pm, amd_pmc_suspend_handler, NULL);
+static const struct dev_pm_ops amd_pmc_pm = {
+ .suspend = amd_pmc_suspend_handler,
+};
#endif
--
2.25.1
This is the start of the stable review cycle for the 5.15.183 release.
There are 54 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 14 May 2025 17:19:58 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.183-r…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Linux 5.15.183-rc1
Pawan Gupta <pawan.kumar.gupta(a)linux.intel.com>
x86/bhi: Do not set BHI_DIS_S in 32-bit mode
Daniel Sneddon <daniel.sneddon(a)linux.intel.com>
x86/bpf: Add IBHF call at end of classic BPF
Daniel Sneddon <daniel.sneddon(a)linux.intel.com>
x86/bpf: Call branch history clearing sequence on exit
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Revert "net: phy: microchip: force IRQ polling mode for lan88xx"
Al Viro <viro(a)zeniv.linux.org.uk>
do_umount(): add missing barrier before refcount checks in sync case
Daniel Wagner <wagi(a)kernel.org>
nvme: unblock ctrl state transition for firmware update
Kevin Baker <kevinb(a)ventureresearch.com>
drm/panel: simple: Update timings for AUO G101EVN010
Thorsten Blum <thorsten.blum(a)linux.dev>
MIPS: Fix MAX_REG_OFFSET
Jonathan Cameron <Jonathan.Cameron(a)huawei.com>
iio: adc: dln2: Use aligned_s64 for timestamp
Andy Shevchenko <andriy.shevchenko(a)linux.intel.com>
types: Complement the aligned types with signed 64-bit one
Dave Penkler <dpenkler(a)gmail.com>
usb: usbtmc: Fix erroneous generic_read ioctl return
Dave Penkler <dpenkler(a)gmail.com>
usb: usbtmc: Fix erroneous wait_srq ioctl return
Dave Penkler <dpenkler(a)gmail.com>
usb: usbtmc: Fix erroneous get_stb ioctl error returns
Oliver Neukum <oneukum(a)suse.com>
USB: usbtmc: use interruptible sleep in usbtmc_read
Andrei Kuchynski <akuchynski(a)chromium.org>
usb: typec: ucsi: displayport: Fix NULL pointer access
RD Babiera <rdbabiera(a)google.com>
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
Jim Lin <jilin(a)nvidia.com>
usb: host: tegra: Prevent host controller crash when OTG port is used
Wayne Chang <waynec(a)nvidia.com>
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
Pawel Laszczak <pawell(a)cadence.com>
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
Pawel Laszczak <pawell(a)cadence.com>
usb: cdnsp: Fix issue with resuming from L1
Jan Kara <jack(a)suse.cz>
ocfs2: stop quota recovery before disabling quotas
Jan Kara <jack(a)suse.cz>
ocfs2: implement handshaking with ocfs2 recovery thread
Jan Kara <jack(a)suse.cz>
ocfs2: switch osb->disable_recovery to enum
Dmitry Antipov <dmantipov(a)yandex.ru>
module: ensure that kobject_put() is safe for module type kobjects
Jason Andryuk <jason.andryuk(a)amd.com>
xenbus: Use kref to track req lifetime
Alexey Charkov <alchark(a)gmail.com>
usb: uhci-platform: Make the clock really optional
Wayne Lin <Wayne.Lin(a)amd.com>
drm/amd/display: Fix wrong handling for AUX_DEFER case
Silvano Seva <s.seva(a)4sigma.it>
iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifo
Silvano Seva <s.seva(a)4sigma.it>
iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo
Gabriel Shahrouzi <gshahrouzi(a)gmail.com>
iio: adis16201: Correct inclinometer channel resolution
Angelo Dureghello <adureghello(a)baylibre.com>
iio: adc: ad7606: fix serial register access
Dave Hansen <dave.hansen(a)linux.intel.com>
x86/mm: Eliminate window where TLB flushes may be inadvertently skipped
Gabriel Shahrouzi <gshahrouzi(a)gmail.com>
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
Gabriel Shahrouzi <gshahrouzi(a)gmail.com>
staging: axis-fifo: Remove hardware resets for user errors
Gabriel Shahrouzi <gshahrouzi(a)gmail.com>
staging: iio: adc: ad7816: Correct conditional logic for store mode
Aditya Garg <gargaditya08(a)live.com>
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Dmitry Torokhov <dmitry.torokhov(a)gmail.com>
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Aditya Garg <gargaditya08(a)live.com>
Input: synaptics - enable InterTouch on Dell Precision M3800
Aditya Garg <gargaditya08(a)live.com>
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Manuel Fombuena <fombuena(a)outlook.com>
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Jonas Gorski <jonas.gorski(a)gmail.com>
net: dsa: b53: fix learning on VLAN unaware bridges
Jonas Gorski <jonas.gorski(a)gmail.com>
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
Jonas Gorski <jonas.gorski(a)gmail.com>
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
Jonas Gorski <jonas.gorski(a)gmail.com>
net: dsa: b53: fix flushing old pvid VLAN on pvid change
Jonas Gorski <jonas.gorski(a)gmail.com>
net: dsa: b53: fix clearing PVID of a port
Jonas Gorski <jonas.gorski(a)gmail.com>
net: dsa: b53: allow leaky reserved multicast
Jozsef Kadlecsik <kadlec(a)netfilter.org>
netfilter: ipset: fix region locking in hash types
Oliver Hartkopp <socketcan(a)hartkopp.net>
can: gw: fix RCU/BH usage in cgw_create_job()
Uladzislau Rezki (Sony) <urezki(a)gmail.com>
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
Eric Dumazet <edumazet(a)google.com>
can: gw: use call_rcu() instead of costly synchronize_rcu()
Guillaume Nault <gnault(a)redhat.com>
gre: Fix again IPv6 link-local address generation.
Eelco Chaudron <echaudro(a)redhat.com>
openvswitch: Fix unsafe attribute parsing in output_userspace()
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration calls
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: mcan: m_can_class_unregister(): fix order of unregistration calls
-------------
Diffstat:
Makefile | 4 +-
arch/mips/include/asm/ptrace.h | 3 +-
arch/x86/kernel/cpu/bugs.c | 5 +-
arch/x86/kernel/cpu/common.c | 9 +-
arch/x86/mm/tlb.c | 23 ++-
arch/x86/net/bpf_jit_comp.c | 52 +++++++
.../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 28 +++-
drivers/gpu/drm/panel/panel-simple.c | 25 +--
drivers/iio/accel/adis16201.c | 4 +-
drivers/iio/adc/ad7606_spi.c | 2 +-
drivers/iio/adc/dln2-adc.c | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 6 +
drivers/input/mouse/synaptics.c | 5 +
drivers/net/can/m_can/m_can.c | 2 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
drivers/net/dsa/b53/b53_common.c | 36 +++--
drivers/net/phy/microchip.c | 46 +++++-
drivers/nvme/host/core.c | 3 +-
drivers/staging/axis-fifo/axis-fifo.c | 14 +-
drivers/staging/iio/adc/ad7816.c | 2 +-
drivers/usb/cdns3/cdnsp-gadget.c | 31 ++++
drivers/usb/cdns3/cdnsp-gadget.h | 6 +
drivers/usb/cdns3/cdnsp-pci.c | 12 +-
drivers/usb/cdns3/cdnsp-ring.c | 3 +-
drivers/usb/cdns3/core.h | 3 +
drivers/usb/class/usbtmc.c | 59 +++++---
drivers/usb/gadget/udc/tegra-xudc.c | 4 +
drivers/usb/host/uhci-platform.c | 2 +-
drivers/usb/host/xhci-tegra.c | 3 +
drivers/usb/typec/tcpm/tcpm.c | 2 +-
drivers/usb/typec/ucsi/displayport.c | 2 +
drivers/xen/xenbus/xenbus.h | 2 +
drivers/xen/xenbus/xenbus_comms.c | 9 +-
drivers/xen/xenbus/xenbus_dev_frontend.c | 2 +-
drivers/xen/xenbus/xenbus_xs.c | 18 ++-
fs/namespace.c | 3 +-
fs/ocfs2/journal.c | 80 +++++++---
fs/ocfs2/journal.h | 1 +
fs/ocfs2/ocfs2.h | 17 ++-
fs/ocfs2/quota_local.c | 9 +-
fs/ocfs2/super.c | 3 +
include/linux/rcupdate.h | 3 +
include/linux/types.h | 3 +-
include/uapi/linux/types.h | 1 +
kernel/params.c | 4 +-
net/can/gw.c | 167 +++++++++++++--------
net/ipv6/addrconf.c | 15 +-
net/netfilter/ipset/ip_set_hash_gen.h | 2 +-
net/openvswitch/actions.c | 3 +-
49 files changed, 538 insertions(+), 204 deletions(-)
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable(a)vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666(a)gmail.com>
---
V2:
Revised the fix approach and updated the description to address the
reduced protection scope of the vc lock in the V1 solution.
---
drivers/dma/mediatek/mtk-cqdma.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
index d5ddb4e30e71..e35271ac1eed 100644
--- a/drivers/dma/mediatek/mtk-cqdma.c
+++ b/drivers/dma/mediatek/mtk-cqdma.c
@@ -422,13 +422,10 @@ static struct virt_dma_desc *mtk_cqdma_find_active_desc(struct dma_chan *c,
struct virt_dma_desc *vd;
unsigned long flags;
- spin_lock_irqsave(&cvc->pc->lock, flags);
list_for_each_entry(vd, &cvc->pc->queue, node)
if (vd->tx.cookie == cookie) {
- spin_unlock_irqrestore(&cvc->pc->lock, flags);
return vd;
}
- spin_unlock_irqrestore(&cvc->pc->lock, flags);
list_for_each_entry(vd, &cvc->vc.desc_issued, node)
if (vd->tx.cookie == cookie)
@@ -452,9 +449,11 @@ static enum dma_status mtk_cqdma_tx_status(struct dma_chan *c,
if (ret == DMA_COMPLETE || !txstate)
return ret;
+ spin_lock_irqsave(&cvc->pc->lock, flags);
spin_lock_irqsave(&cvc->vc.lock, flags);
vd = mtk_cqdma_find_active_desc(c, cookie);
spin_unlock_irqrestore(&cvc->vc.lock, flags);
+ spin_unlock_irqrestore(&cvc->pc->lock, flags);
if (vd) {
cvd = to_cqdma_vdesc(vd);
--
2.34.1
The avs_card_suspend_pre() and avs_card_resume_post() in es8336
calls the snd_soc_card_get_codec_dai(), but does not check its return
value which is a null pointer if the function fails. This can result
in a null pointer dereference. A proper implementation can be found
in acp5x_nau8821_hw_params() and card_suspend_pre().
Add a null pointer check for snd_soc_card_get_codec_dai() to avoid null
pointer dereference when the function fails.
Fixes: 32e40c8d6ff9 ("ASoC: Intel: avs: Add es8336 machine board")
Cc: stable(a)vger.kernel.org # v6.6
Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn>
---
sound/soc/intel/avs/boards/es8336.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/soc/intel/avs/boards/es8336.c b/sound/soc/intel/avs/boards/es8336.c
index 426ce37105ae..e31cc656f076 100644
--- a/sound/soc/intel/avs/boards/es8336.c
+++ b/sound/soc/intel/avs/boards/es8336.c
@@ -243,6 +243,9 @@ static int avs_card_suspend_pre(struct snd_soc_card *card)
{
struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, ES8336_CODEC_DAI);
+ if (!codec_dai)
+ return -EINVAL;
+
return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
}
@@ -251,6 +254,9 @@ static int avs_card_resume_post(struct snd_soc_card *card)
struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, ES8336_CODEC_DAI);
struct avs_card_drvdata *data = snd_soc_card_get_drvdata(card);
+ if (!codec_dai)
+ return -EINVAL;
+
return snd_soc_component_set_jack(codec_dai->component, &data->jack, NULL);
}
--
2.42.0.windows.2
From: Steven Rostedt <rostedt(a)goodmis.org>
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable(a)vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos(a)tasossah.com>
Tested-by: Tasos Sahanidis <tasos(a)tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org>
---
kernel/trace/ring_buffer.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index c0f877d39a24..3f9bf562beea 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1887,10 +1887,12 @@ static void rb_meta_validate_events(struct ring_buffer_per_cpu *cpu_buffer)
head_page = cpu_buffer->head_page;
- /* If both the head and commit are on the reader_page then we are done. */
- if (head_page == cpu_buffer->reader_page &&
- head_page == cpu_buffer->commit_page)
+ /* If the commit_buffer is the reader page, update the commit page */
+ if (meta->commit_buffer == (unsigned long)cpu_buffer->reader_page->page) {
+ cpu_buffer->commit_page = cpu_buffer->reader_page;
+ /* Nothing more to do, the only page is the reader page */
goto done;
+ }
/* Iterate until finding the commit page */
for (i = 0; i < meta->nr_subbufs + 1; i++, rb_inc_page(&head_page)) {
--
2.47.2
From: pengdonglin <pengdonglin(a)xiaomi.com>
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable(a)vger.kernel.org
Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng(a)gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org>
---
kernel/trace/trace_events_trigger.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c
index b66b6d235d91..6e87ae2a1a66 100644
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -1560,7 +1560,7 @@ stacktrace_trigger(struct event_trigger_data *data,
struct trace_event_file *file = data->private_data;
if (file)
- __trace_stack(file->tr, tracing_gen_ctx(), STACK_SKIP);
+ __trace_stack(file->tr, tracing_gen_ctx_dec(), STACK_SKIP);
else
trace_dump_stack(STACK_SKIP);
}
--
2.47.2
From: Steven Rostedt <rostedt(a)goodmis.org>
When using trace_array_printk() on a created instance, the correct
function to use to initialize it is:
trace_array_init_printk()
Not
trace_printk_init_buffer()
The former is a proper function to use, the latter is for initializing
trace_printk() and causes the NOTICE banner to be displayed.
Cc: stable(a)vger.kernel.org
Cc: Masami Hiramatsu <mhiramat(a)kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com>
Cc: Divya Indi <divya.indi(a)oracle.com>
Link: https://lore.kernel.org/20250509152657.0f6744d9@gandalf.local.home
Fixes: 89ed42495ef4a ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Fixes: 38ce2a9e33db6 ("tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org>
---
samples/ftrace/sample-trace-array.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/samples/ftrace/sample-trace-array.c b/samples/ftrace/sample-trace-array.c
index dac67c367457..4147616102f9 100644
--- a/samples/ftrace/sample-trace-array.c
+++ b/samples/ftrace/sample-trace-array.c
@@ -112,7 +112,7 @@ static int __init sample_trace_array_init(void)
/*
* If context specific per-cpu buffers havent already been allocated.
*/
- trace_printk_init_buffers();
+ trace_array_init_printk(tr);
simple_tsk = kthread_run(simple_thread, NULL, "sample-instance");
if (IS_ERR(simple_tsk)) {
--
2.47.2
usb core avoids sending a Set-Interface altsetting 0 request after device
reset, and instead relies on calling usb_disable_interface() and
usb_enable_interface() to flush and reset host-side of those endpoints.
xHCI hosts allocate and set up endpoint ring buffers and host_ep->hcpriv
during usb_hcd_alloc_bandwidth() callback, which in this case is called
before flushing the endpoint in usb_disable_interface().
Call usb_disable_interface() before usb_hcd_alloc_bandwidth() to ensure
URBs are flushed before new ring buffers for the endpoints are allocated.
Otherwise host driver will attempt to find and remove old stale URBs
from a freshly allocated new ringbuffer.
Cc: stable(a)vger.kernel.org
Fixes: 4fe0387afa89 ("USB: don't send Set-Interface after reset")
Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com>
---
drivers/usb/core/hub.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0e1dd6ef60a7..9f19fc7494e0 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -6133,6 +6133,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
struct usb_hub *parent_hub;
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
struct usb_device_descriptor descriptor;
+ struct usb_interface *intf;
struct usb_host_bos *bos;
int i, j, ret = 0;
int port1 = udev->portnum;
@@ -6190,6 +6191,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (!udev->actconfig)
goto done;
+ /*
+ * Some devices can't handle setting default altsetting 0 with a
+ * Set-Interface request. Disable host-side endpoints of those
+ * interfaces here. Enable and reset them back after host has set
+ * its internal endpoint structures during usb_hcd_alloc_bandwith()
+ */
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+ usb_disable_interface(udev, intf, true);
+ }
+
mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
if (ret < 0) {
@@ -6221,12 +6234,11 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
*/
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
struct usb_host_config *config = udev->actconfig;
- struct usb_interface *intf = config->interface[i];
struct usb_interface_descriptor *desc;
+ intf = config->interface[i];
desc = &intf->cur_altsetting->desc;
if (desc->bAlternateSetting == 0) {
- usb_disable_interface(udev, intf, true);
usb_enable_interface(udev, intf, true);
ret = 0;
} else {
--
2.43.0
The original PPTT code had a bug where the processor subtable length
was not correctly validated when encountering a truncated
acpi_pptt_processor node.
Commit 7ab4f0e37a0f4 ("ACPI PPTT: Fix coding mistakes in a couple of
sizeof() calls") attempted to fix this by validating the size is as
large as the acpi_pptt_processor node structure. This introduced a
regression where the last processor node in the PPTT table is ignored
if it doesn't contain any private resources. That results errors like:
ACPI PPTT: PPTT table found, but unable to locate core XX (XX)
ACPI: SPE must be homogeneous
Furthermore, it fail in a common case where the node length isn't
equal to the acpi_pptt_processor structure size, leaving the original
bug in a modified form.
Correct the regression by adjusting the loop termination conditions as
suggested by the bug reporters. An additional check performed after
the subtable node type is detected, validates the acpi_pptt_processor
node is fully contained in the PPTT table. Repeating the check in
acpi_pptt_leaf_node() is largely redundant as the node is already
known to be fully contained in the table.
The case where a final truncated node's parent property is accepted,
but the node itself is rejected should not be considered a bug.
Fixes: 7ab4f0e37a0f4 ("ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls")
Reported-by: Maximilian Heyne <mheyne(a)amazon.de>
Closes: https://lore.kernel.org/linux-acpi/20250506-draco-taped-15f475cd@mheyne-ama…
Reported-by: Yicong Yang <yangyicong(a)hisilicon.com>
Closes: https://lore.kernel.org/linux-acpi/20250507035124.28071-1-yangyicong@huawei…
Signed-off-by: Jeremy Linton <jeremy.linton(a)arm.com>
Cc: Jean-Marc Eurin <jmeurin(a)google.com>
Cc: <stable(a)vger.kernel.org>
---
drivers/acpi/pptt.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index f73ce6e13065..54676e3d82dd 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -231,16 +231,18 @@ static int acpi_pptt_leaf_node(struct acpi_table_header *table_hdr,
sizeof(struct acpi_table_pptt));
proc_sz = sizeof(struct acpi_pptt_processor);
- while ((unsigned long)entry + proc_sz < table_end) {
+ /* ignore subtable types that are smaller than a processor node */
+ while ((unsigned long)entry + proc_sz <= table_end) {
cpu_node = (struct acpi_pptt_processor *)entry;
+
if (entry->type == ACPI_PPTT_TYPE_PROCESSOR &&
cpu_node->parent == node_entry)
return 0;
if (entry->length == 0)
return 0;
+
entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
entry->length);
-
}
return 1;
}
@@ -273,15 +275,18 @@ static struct acpi_pptt_processor *acpi_find_processor_node(struct acpi_table_he
proc_sz = sizeof(struct acpi_pptt_processor);
/* find the processor structure associated with this cpuid */
- while ((unsigned long)entry + proc_sz < table_end) {
+ while ((unsigned long)entry + proc_sz <= table_end) {
cpu_node = (struct acpi_pptt_processor *)entry;
if (entry->length == 0) {
pr_warn("Invalid zero length subtable\n");
break;
}
+ /* entry->length may not equal proc_sz, revalidate the processor structure length */
if (entry->type == ACPI_PPTT_TYPE_PROCESSOR &&
acpi_cpu_id == cpu_node->acpi_processor_id &&
+ (unsigned long)entry + entry->length <= table_end &&
+ entry->length == proc_sz + cpu_node->number_of_priv_resources * sizeof(u32) &&
acpi_pptt_leaf_node(table_hdr, cpu_node)) {
return (struct acpi_pptt_processor *)entry;
}
--
2.49.0
While trying to build 6.14.7-rc1 with CONFIG_CPU_MITIGATIONS unset:
LD .tmp_vmlinux1
ld: arch/x86/net/bpf_jit_comp.o: in function `emit_indirect_jump':
/tmp/linux-6.14.7/arch/x86/net/bpf_jit_comp.c:660:(.text+0x97e): undefined reference to `__x86_indirect_its_thunk_array'
make[2]: *** [scripts/Makefile.vmlinux:77: vmlinux] Error 1
make[1]: *** [/tmp/linux-6.14.7/Makefile:1234: vmlinux] Error 2
make: *** [Makefile:251: __sub-make] Error 2
- applying 9f35e33144ae aka "x86/its: Fix build errors when CONFIG_MODULES=n"
did not help
- mainline at 9f35e33144ae does not have this problem (same config)
Are we missing a commit in stable?
I temporarily threw "if (IS_ENABLED(CONFIG_MITIGATION_ITS))" around
the problematic feature check and that made it work, but I get the
feeling that cpu_feature_enabled(X86_FEATURE_INDIRECT_THUNK_ITS) is
implemented differently than the other feature checks and/or is
missing something.
thanks
Holger
The acp_max98388_hw_params() calls the snd_soc_card_get_codec_dai(),
but does not check its return value which is a null pointer if the
function fails. This can result in a null pointer dereference.
Add a null pointer check for snd_soc_card_get_codec_dai() to avoid null
pointer dereference when the function fails.
Fixes: ac91c8c89782 ("ASoC: amd: acp: Add machine driver support for max98388 codec")
Cc: stable(a)vger.kernel.org # v6.6
Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn>
---
sound/soc/amd/acp/acp-mach-common.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c
index f7602c1769bf..a795cc1836cc 100644
--- a/sound/soc/amd/acp/acp-mach-common.c
+++ b/sound/soc/amd/acp/acp-mach-common.c
@@ -918,6 +918,9 @@ static int acp_max98388_hw_params(struct snd_pcm_substream *substream,
MAX98388_CODEC_DAI);
int ret;
+ if (codec_dai)
+ return -EINVAL;
+
ret = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF);
--
2.42.0.windows.2
If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable(a)vger.kernel.org
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <make24(a)iscas.ac.cn>
---
Changes in v2:
- modified the bug description as suggestions.
---
drivers/phy/tegra/xusb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 79d4814d758d..c89df95aa6ca 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -548,16 +548,16 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
err = dev_set_name(&port->dev, "%s-%u", name, index);
if (err < 0)
- goto unregister;
+ goto put_device;
err = device_add(&port->dev);
if (err < 0)
- goto unregister;
+ goto put_device;
return 0;
-unregister:
- device_unregister(&port->dev);
+put_device:
+ put_device(&port->dev);
return err;
}
--
2.25.1
While the set_msix() callback function in pcie-cadence-ep writes the
Table Size field correctly (N-1), the calculation of the PBA offset
is wrong because it calculates space for (N-1) entries instead of N.
This results in e.g. the following error when using QEMU with PCI
passthrough on a device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
Cc: stable(a)vger.kernel.org
Fixes: 3ef5d16f50f8 ("PCI: cadence: Add MSI-X support to Endpoint driver")
Reviewed-by: Wilfred Mallawa <wilfred.mallawa(a)wdc.com>
Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org>
Signed-off-by: Niklas Cassel <cassel(a)kernel.org>
---
drivers/pci/controller/cadence/pcie-cadence-ep.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index 599ec4b1223e..112ae200b393 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -292,13 +292,14 @@ static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u8 vfn,
struct cdns_pcie *pcie = &ep->pcie;
u32 cap = CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET;
u32 val, reg;
+ u16 actual_interrupts = interrupts + 1;
fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
reg = cap + PCI_MSIX_FLAGS;
val = cdns_pcie_ep_fn_readw(pcie, fn, reg);
val &= ~PCI_MSIX_FLAGS_QSIZE;
- val |= interrupts;
+ val |= interrupts; /* 0's based value */
cdns_pcie_ep_fn_writew(pcie, fn, reg, val);
/* Set MSI-X BAR and offset */
@@ -308,7 +309,7 @@ static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u8 vfn,
/* Set PBA BAR and offset. BAR must match MSI-X BAR */
reg = cap + PCI_MSIX_PBA;
- val = (offset + (interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
+ val = (offset + (actual_interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
cdns_pcie_ep_fn_writel(pcie, fn, reg, val);
return 0;
--
2.49.0
While the set_msix() callback function in pcie-designware-ep writes the
Table Size field correctly (N-1), the calculation of the PBA offset
is wrong because it calculates space for (N-1) entries instead of N.
This results in e.g. the following error when using QEMU with PCI
passthrough on a device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
Cc: stable(a)vger.kernel.org
Fixes: 83153d9f36e2 ("PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments")
Reviewed-by: Wilfred Mallawa <wilfred.mallawa(a)wdc.com>
Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org>
Signed-off-by: Niklas Cassel <cassel(a)kernel.org>
---
drivers/pci/controller/dwc/pcie-designware-ep.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 1a0bf9341542..24026f3f3413 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -585,6 +585,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct dw_pcie_ep_func *ep_func;
u32 val, reg;
+ u16 actual_interrupts = interrupts + 1;
ep_func = dw_pcie_ep_get_func_from_ep(ep, func_no);
if (!ep_func || !ep_func->msix_cap)
@@ -595,7 +596,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
reg = ep_func->msix_cap + PCI_MSIX_FLAGS;
val = dw_pcie_ep_readw_dbi(ep, func_no, reg);
val &= ~PCI_MSIX_FLAGS_QSIZE;
- val |= interrupts;
+ val |= interrupts; /* 0's based value */
dw_pcie_writew_dbi(pci, reg, val);
reg = ep_func->msix_cap + PCI_MSIX_TABLE;
@@ -603,7 +604,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
dw_pcie_ep_writel_dbi(ep, func_no, reg, val);
reg = ep_func->msix_cap + PCI_MSIX_PBA;
- val = (offset + (interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
+ val = (offset + (actual_interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
dw_pcie_ep_writel_dbi(ep, func_no, reg, val);
dw_pcie_dbi_ro_wr_dis(pci);
--
2.49.0
First patch of the series fixes possible infinite loop.
Remaining three patches fixes address alignment issue observed
after "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()"
Patch-2 and patch-3 applies to stable version 6.6 onwards.
Patch-4 applies to stable version 6.12 onwards
Bharat Bhushan (4):
crypto: octeontx2: add timeout for load_fvc completion poll
crypto: octeontx2: Fix address alignment issue on ucode loading
crypto: octeontx2: Fix address alignment on CN10K A0/A1 and OcteonTX2
crypto: octeontx2: Fix address alignment on CN10KB and CN10KA-B0
.../marvell/octeontx2/otx2_cpt_reqmgr.h | 119 +++++++++++++-----
.../marvell/octeontx2/otx2_cptpf_ucode.c | 46 ++++---
2 files changed, 121 insertions(+), 44 deletions(-)
--
2.34.1
Keyboard and touchpad stopped working on several Apple Macbooks from the
year 2017 using kernel 6.12.xx . Until now I could only find this
discussion affirming the bug on Debian and Fedora:
https://github.com/Dunedan/mbp-2016-linux/issues/202
On siduction I also tried the more recent kernels 6.14.5 and mainline
6.15-rc4 (from Ubuntu) and the issue persisted with my testdevice
MacBookPro14,1 -- see the relevant output:
kernel: platform pxa2xx-spi.3: Adding to iommu group 20
kernel: input: Apple SPI Keyboard as
/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
Many thanks,
Jörg Berkel
Hey,
I just saw that I was debited twice for my latest transaction on your website.
Transaction appears twice on my payment history, and I need to get a reversal for the duplicate transaction.
Please investigate this and fix the issue at your earliest convenience? I’d appreciate a reply as fast as possible.
Thank you for your help in advance. Eagerly awaiting your update.
Best regards,
Charles Edwards
From: Linus Torvalds <torvalds(a)linux-foundation.org>
[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]
... and use it to limit the virtual terminals to just N_TTY. They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.
Tested-by: Tetsuo Handa <penguin-kernel(a)i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby(a)kernel.org>
Cc: Andrew Morton <akpm(a)linux-foundation.org>
Cc: Daniel Starke <daniel.starke(a)siemens.com>
Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c(a)syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org>
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
[Minor conflict resolved due to code context change. And also backport description
comments for struct tty_operations.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
drivers/tty/tty_ldisc.c | 6 +
drivers/tty/vt/vt.c | 10 ++
include/linux/tty_driver.h | 339 +++++++++++++++++++++++++++++++++++++
3 files changed, 355 insertions(+)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index c34c01579b75..1ab3c4eb3359 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -567,6 +567,12 @@ int tty_set_ldisc(struct tty_struct *tty, int disc)
goto out;
}
+ if (tty->ops->ldisc_ok) {
+ retval = tty->ops->ldisc_ok(tty, disc);
+ if (retval)
+ goto out;
+ }
+
old_ldisc = tty->ldisc;
/* Shutdown the old discipline. */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index bd125ea5c51f..5b35ea7744a4 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3440,6 +3440,15 @@ static void con_cleanup(struct tty_struct *tty)
tty_port_put(&vc->port);
}
+/*
+ * We can't deal with anything but the N_TTY ldisc,
+ * because we can sleep in our write() routine.
+ */
+static int con_ldisc_ok(struct tty_struct *tty, int ldisc)
+{
+ return ldisc == N_TTY ? 0 : -EINVAL;
+}
+
static int default_color = 7; /* white */
static int default_italic_color = 2; // green (ASCII)
static int default_underline_color = 3; // cyan (ASCII)
@@ -3567,6 +3576,7 @@ static const struct tty_operations con_ops = {
.resize = vt_resize,
.shutdown = con_shutdown,
.cleanup = con_cleanup,
+ .ldisc_ok = con_ldisc_ok,
};
static struct cdev vc0_cdev;
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index c20431d8def8..9707328595df 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -244,6 +244,344 @@ struct tty_driver;
struct serial_icounter_struct;
struct serial_struct;
+/**
+ * struct tty_operations -- interface between driver and tty
+ *
+ * @lookup: ``struct tty_struct *()(struct tty_driver *self, struct file *,
+ * int idx)``
+ *
+ * Return the tty device corresponding to @idx, %NULL if there is not
+ * one currently in use and an %ERR_PTR value on error. Called under
+ * %tty_mutex (for now!)
+ *
+ * Optional method. Default behaviour is to use the @self->ttys array.
+ *
+ * @install: ``int ()(struct tty_driver *self, struct tty_struct *tty)``
+ *
+ * Install a new @tty into the @self's internal tables. Used in
+ * conjunction with @lookup and @remove methods.
+ *
+ * Optional method. Default behaviour is to use the @self->ttys array.
+ *
+ * @remove: ``void ()(struct tty_driver *self, struct tty_struct *tty)``
+ *
+ * Remove a closed @tty from the @self's internal tables. Used in
+ * conjunction with @lookup and @remove methods.
+ *
+ * Optional method. Default behaviour is to use the @self->ttys array.
+ *
+ * @open: ``int ()(struct tty_struct *tty, struct file *)``
+ *
+ * This routine is called when a particular @tty device is opened. This
+ * routine is mandatory; if this routine is not filled in, the attempted
+ * open will fail with %ENODEV.
+ *
+ * Required method. Called with tty lock held. May sleep.
+ *
+ * @close: ``void ()(struct tty_struct *tty, struct file *)``
+ *
+ * This routine is called when a particular @tty device is closed. At the
+ * point of return from this call the driver must make no further ldisc
+ * calls of any kind.
+ *
+ * Remark: called even if the corresponding @open() failed.
+ *
+ * Required method. Called with tty lock held. May sleep.
+ *
+ * @shutdown: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine is called under the tty lock when a particular @tty device
+ * is closed for the last time. It executes before the @tty resources
+ * are freed so may execute while another function holds a @tty kref.
+ *
+ * @cleanup: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine is called asynchronously when a particular @tty device
+ * is closed for the last time freeing up the resources. This is
+ * actually the second part of shutdown for routines that might sleep.
+ *
+ * @write: ``int ()(struct tty_struct *tty, const unsigned char *buf,
+ * int count)``
+ *
+ * This routine is called by the kernel to write a series (@count) of
+ * characters (@buf) to the @tty device. The characters may come from
+ * user space or kernel space. This routine will return the
+ * number of characters actually accepted for writing.
+ *
+ * May occur in parallel in special cases. Because this includes panic
+ * paths drivers generally shouldn't try and do clever locking here.
+ *
+ * Optional: Required for writable devices. May not sleep.
+ *
+ * @put_char: ``int ()(struct tty_struct *tty, unsigned char ch)``
+ *
+ * This routine is called by the kernel to write a single character @ch to
+ * the @tty device. If the kernel uses this routine, it must call the
+ * @flush_chars() routine (if defined) when it is done stuffing characters
+ * into the driver. If there is no room in the queue, the character is
+ * ignored.
+ *
+ * Optional: Kernel will use the @write method if not provided. Do not
+ * call this function directly, call tty_put_char().
+ *
+ * @flush_chars: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine is called by the kernel after it has written a
+ * series of characters to the tty device using @put_char().
+ *
+ * Optional. Do not call this function directly, call
+ * tty_driver_flush_chars().
+ *
+ * @write_room: ``unsigned int ()(struct tty_struct *tty)``
+ *
+ * This routine returns the numbers of characters the @tty driver
+ * will accept for queuing to be written. This number is subject
+ * to change as output buffers get emptied, or if the output flow
+ * control is acted.
+ *
+ * The ldisc is responsible for being intelligent about multi-threading of
+ * write_room/write calls
+ *
+ * Required if @write method is provided else not needed. Do not call this
+ * function directly, call tty_write_room()
+ *
+ * @chars_in_buffer: ``unsigned int ()(struct tty_struct *tty)``
+ *
+ * This routine returns the number of characters in the device private
+ * output queue. Used in tty_wait_until_sent() and for poll()
+ * implementation.
+ *
+ * Optional: if not provided, it is assumed there is no queue on the
+ * device. Do not call this function directly, call tty_chars_in_buffer().
+ *
+ * @ioctl: ``int ()(struct tty_struct *tty, unsigned int cmd,
+ * unsigned long arg)``
+ *
+ * This routine allows the @tty driver to implement device-specific
+ * ioctls. If the ioctl number passed in @cmd is not recognized by the
+ * driver, it should return %ENOIOCTLCMD.
+ *
+ * Optional.
+ *
+ * @compat_ioctl: ``long ()(struct tty_struct *tty, unsigned int cmd,
+ * unsigned long arg)``
+ *
+ * Implement ioctl processing for 32 bit process on 64 bit system.
+ *
+ * Optional.
+ *
+ * @set_termios: ``void ()(struct tty_struct *tty, struct ktermios *old)``
+ *
+ * This routine allows the @tty driver to be notified when device's
+ * termios settings have changed. New settings are in @tty->termios.
+ * Previous settings are passed in the @old argument.
+ *
+ * The API is defined such that the driver should return the actual modes
+ * selected. This means that the driver is responsible for modifying any
+ * bits in @tty->termios it cannot fulfill to indicate the actual modes
+ * being used.
+ *
+ * Optional. Called under the @tty->termios_rwsem. May sleep.
+ *
+ * @ldisc_ok: ``int ()(struct tty_struct *tty, int ldisc)``
+ *
+ * This routine allows the @tty driver to decide if it can deal
+ * with a particular @ldisc.
+ *
+ * Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem.
+ *
+ * @set_ldisc: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine allows the @tty driver to be notified when the device's
+ * line discipline is being changed. At the point this is done the
+ * discipline is not yet usable.
+ *
+ * Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem.
+ *
+ * @throttle: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that input buffers for the line
+ * discipline are close to full, and it should somehow signal that no more
+ * characters should be sent to the @tty.
+ *
+ * Serialization including with @unthrottle() is the job of the ldisc
+ * layer.
+ *
+ * Optional: Always invoke via tty_throttle_safe(). Called under the
+ * @tty->termios_rwsem.
+ *
+ * @unthrottle: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it should signal that
+ * characters can now be sent to the @tty without fear of overrunning the
+ * input buffers of the line disciplines.
+ *
+ * Optional. Always invoke via tty_unthrottle(). Called under the
+ * @tty->termios_rwsem.
+ *
+ * @stop: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it should stop outputting
+ * characters to the tty device.
+ *
+ * Called with @tty->flow.lock held. Serialized with @start() method.
+ *
+ * Optional. Always invoke via stop_tty().
+ *
+ * @start: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it resumed sending
+ * characters to the @tty device.
+ *
+ * Called with @tty->flow.lock held. Serialized with stop() method.
+ *
+ * Optional. Always invoke via start_tty().
+ *
+ * @hangup: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it should hang up the @tty
+ * device.
+ *
+ * Optional. Called with tty lock held.
+ *
+ * @break_ctl: ``int ()(struct tty_struct *tty, int state)``
+ *
+ * This optional routine requests the @tty driver to turn on or off BREAK
+ * status on the RS-232 port. If @state is -1, then the BREAK status
+ * should be turned on; if @state is 0, then BREAK should be turned off.
+ *
+ * If this routine is implemented, the high-level tty driver will handle
+ * the following ioctls: %TCSBRK, %TCSBRKP, %TIOCSBRK, %TIOCCBRK.
+ *
+ * If the driver sets %TTY_DRIVER_HARDWARE_BREAK in tty_alloc_driver(),
+ * then the interface will also be called with actual times and the
+ * hardware is expected to do the delay work itself. 0 and -1 are still
+ * used for on/off.
+ *
+ * Optional: Required for %TCSBRK/%BRKP/etc. handling. May sleep.
+ *
+ * @flush_buffer: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine discards device private output buffer. Invoked on close,
+ * hangup, to implement %TCOFLUSH ioctl and similar.
+ *
+ * Optional: if not provided, it is assumed there is no queue on the
+ * device. Do not call this function directly, call
+ * tty_driver_flush_buffer().
+ *
+ * @wait_until_sent: ``void ()(struct tty_struct *tty, int timeout)``
+ *
+ * This routine waits until the device has written out all of the
+ * characters in its transmitter FIFO. Or until @timeout (in jiffies) is
+ * reached.
+ *
+ * Optional: If not provided, the device is assumed to have no FIFO.
+ * Usually correct to invoke via tty_wait_until_sent(). May sleep.
+ *
+ * @send_xchar: ``void ()(struct tty_struct *tty, char ch)``
+ *
+ * This routine is used to send a high-priority XON/XOFF character (@ch)
+ * to the @tty device.
+ *
+ * Optional: If not provided, then the @write method is called under
+ * the @tty->atomic_write_lock to keep it serialized with the ldisc.
+ *
+ * @tiocmget: ``int ()(struct tty_struct *tty)``
+ *
+ * This routine is used to obtain the modem status bits from the @tty
+ * driver.
+ *
+ * Optional: If not provided, then %ENOTTY is returned from the %TIOCMGET
+ * ioctl. Do not call this function directly, call tty_tiocmget().
+ *
+ * @tiocmset: ``int ()(struct tty_struct *tty,
+ * unsigned int set, unsigned int clear)``
+ *
+ * This routine is used to set the modem status bits to the @tty driver.
+ * First, @clear bits should be cleared, then @set bits set.
+ *
+ * Optional: If not provided, then %ENOTTY is returned from the %TIOCMSET
+ * ioctl. Do not call this function directly, call tty_tiocmset().
+ *
+ * @resize: ``int ()(struct tty_struct *tty, struct winsize *ws)``
+ *
+ * Called when a termios request is issued which changes the requested
+ * terminal geometry to @ws.
+ *
+ * Optional: the default action is to update the termios structure
+ * without error. This is usually the correct behaviour. Drivers should
+ * not force errors here if they are not resizable objects (e.g. a serial
+ * line). See tty_do_resize() if you need to wrap the standard method
+ * in your own logic -- the usual case.
+ *
+ * @get_icount: ``int ()(struct tty_struct *tty,
+ * struct serial_icounter *icount)``
+ *
+ * Called when the @tty device receives a %TIOCGICOUNT ioctl. Passed a
+ * kernel structure @icount to complete.
+ *
+ * Optional: called only if provided, otherwise %ENOTTY will be returned.
+ *
+ * @get_serial: ``int ()(struct tty_struct *tty, struct serial_struct *p)``
+ *
+ * Called when the @tty device receives a %TIOCGSERIAL ioctl. Passed a
+ * kernel structure @p (&struct serial_struct) to complete.
+ *
+ * Optional: called only if provided, otherwise %ENOTTY will be returned.
+ * Do not call this function directly, call tty_tiocgserial().
+ *
+ * @set_serial: ``int ()(struct tty_struct *tty, struct serial_struct *p)``
+ *
+ * Called when the @tty device receives a %TIOCSSERIAL ioctl. Passed a
+ * kernel structure @p (&struct serial_struct) to set the values from.
+ *
+ * Optional: called only if provided, otherwise %ENOTTY will be returned.
+ * Do not call this function directly, call tty_tiocsserial().
+ *
+ * @show_fdinfo: ``void ()(struct tty_struct *tty, struct seq_file *m)``
+ *
+ * Called when the @tty device file descriptor receives a fdinfo request
+ * from VFS (to show in /proc/<pid>/fdinfo/). @m should be filled with
+ * information.
+ *
+ * Optional: called only if provided, otherwise nothing is written to @m.
+ * Do not call this function directly, call tty_show_fdinfo().
+ *
+ * @poll_init: ``int ()(struct tty_driver *driver, int line, char *options)``
+ *
+ * kgdboc support (Documentation/dev-tools/kgdb.rst). This routine is
+ * called to initialize the HW for later use by calling @poll_get_char or
+ * @poll_put_char.
+ *
+ * Optional: called only if provided, otherwise skipped as a non-polling
+ * driver.
+ *
+ * @poll_get_char: ``int ()(struct tty_driver *driver, int line)``
+ *
+ * kgdboc support (see @poll_init). @driver should read a character from a
+ * tty identified by @line and return it.
+ *
+ * Optional: called only if @poll_init provided.
+ *
+ * @poll_put_char: ``void ()(struct tty_driver *driver, int line, char ch)``
+ *
+ * kgdboc support (see @poll_init). @driver should write character @ch to
+ * a tty identified by @line.
+ *
+ * Optional: called only if @poll_init provided.
+ *
+ * @proc_show: ``int ()(struct seq_file *m, void *driver)``
+ *
+ * Driver @driver (cast to &struct tty_driver) can show additional info in
+ * /proc/tty/driver/<driver_name>. It is enough to fill in the information
+ * into @m.
+ *
+ * Optional: called only if provided, otherwise no /proc entry created.
+ *
+ * This structure defines the interface between the low-level tty driver and
+ * the tty routines. These routines can be defined. Unless noted otherwise,
+ * they are optional, and can be filled in with a %NULL pointer.
+ */
struct tty_operations {
struct tty_struct * (*lookup)(struct tty_driver *driver,
struct file *filp, int idx);
@@ -271,6 +609,7 @@ struct tty_operations {
void (*hangup)(struct tty_struct *tty);
int (*break_ctl)(struct tty_struct *tty, int state);
void (*flush_buffer)(struct tty_struct *tty);
+ int (*ldisc_ok)(struct tty_struct *tty, int ldisc);
void (*set_ldisc)(struct tty_struct *tty);
void (*wait_until_sent)(struct tty_struct *tty, int timeout);
void (*send_xchar)(struct tty_struct *tty, char ch);
--
2.34.1
The patch titled
Subject: mm/hugetlb: fix a deadlock with pagecache_folio and hugetlb_fault_mutex_table
has been added to the -mm mm-new branch. Its filename is
mm-hugetlb-fix-a-deadlock-with-pagecache_folio-and-hugetlb_fault_mutex_table.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche…
This patch will later appear in the mm-new branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Note, mm-new is a provisional staging ground for work-in-progress
patches, and acceptance into mm-new is a notification for others take
notice and to finish up reviews. Please do not hesitate to respond to
review feedback and post updated versions to replace or incrementally
fixup patches in mm-new.
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Gavin Guo <gavinguo(a)igalia.com>
Subject: mm/hugetlb: fix a deadlock with pagecache_folio and hugetlb_fault_mutex_table
Date: Tue, 13 May 2025 17:34:48 +0800
Fix a deadlock which can be triggered by an internal syzkaller [1]
reproducer and captured by bpftrace script [2] and its log [3] in this
scenario:
Process 1 Process 2
--- ---
hugetlb_fault
mutex_lock(B) // take B
filemap_lock_hugetlb_folio
filemap_lock_folio
__filemap_get_folio
folio_lock(A) // take A
hugetlb_wp
mutex_unlock(B) // release B
... hugetlb_fault
... mutex_lock(B) // take B
filemap_lock_hugetlb_folio
filemap_lock_folio
__filemap_get_folio
folio_lock(A) // blocked
unmap_ref_private
...
mutex_lock(B) // retake and blocked
This is a ABBA deadlock involving two locks:
- Lock A: pagecache_folio lock
- Lock B: hugetlb_fault_mutex_table lock
The deadlock occurs between two processes as follows:
1. The first process (let's call it Process 1) is handling a
copy-on-write (COW) operation on a hugepage via hugetlb_wp. Due to
insufficient reserved hugetlb pages, Process 1, owner of the reserved
hugetlb page, attempts to unmap a hugepage owned by another process
(non-owner) to satisfy the reservation. Before unmapping, Process 1
acquires lock B (hugetlb_fault_mutex_table lock) and then lock A
(pagecache_folio lock). To proceed with the unmap, it releases Lock B
but retains Lock A. After the unmap, Process 1 tries to reacquire Lock
B. However, at this point, Lock B has already been acquired by another
process.
2. The second process (Process 2) enters the hugetlb_fault handler
during the unmap operation. It successfully acquires Lock B
(hugetlb_fault_mutex_table lock) that was just released by Process 1,
but then attempts to acquire Lock A (pagecache_folio lock), which is
still held by Process 1.
As a result, Process 1 (holding Lock A) is blocked waiting for Lock B
(held by Process 2), while Process 2 (holding Lock B) is blocked waiting
for Lock A (held by Process 1), constructing a ABBA deadlock scenario.
The solution here is to unlock the pagecache_folio and provide the
pagecache_folio_unlocked variable to the caller to have the visibility
over the pagecache_folio status for subsequent handling.
The error message:
INFO: task repro_20250402_:13229 blocked for more than 64 seconds.
Not tainted 6.15.0-rc3+ #24
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro_20250402_ state:D stack:25856 pid:13229 tgid:13228 ppid:3513 task_flags:0x400040 flags:0x00004006
Call Trace:
<TASK>
__schedule+0x1755/0x4f50
schedule+0x158/0x330
schedule_preempt_disabled+0x15/0x30
__mutex_lock+0x75f/0xeb0
hugetlb_wp+0xf88/0x3440
hugetlb_fault+0x14c8/0x2c30
trace_clock_x86_tsc+0x20/0x20
do_user_addr_fault+0x61d/0x1490
exc_page_fault+0x64/0x100
asm_exc_page_fault+0x26/0x30
RIP: 0010:__put_user_4+0xd/0x20
copy_process+0x1f4a/0x3d60
kernel_clone+0x210/0x8f0
__x64_sys_clone+0x18d/0x1f0
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x41b26d
</TASK>
INFO: task repro_20250402_:13229 is blocked on a mutex likely owned by task repro_20250402_:13250.
task:repro_20250402_ state:D stack:28288 pid:13250 tgid:13228 ppid:3513 task_flags:0x400040 flags:0x00000006
Call Trace:
<TASK>
__schedule+0x1755/0x4f50
schedule+0x158/0x330
io_schedule+0x92/0x110
folio_wait_bit_common+0x69a/0xba0
__filemap_get_folio+0x154/0xb70
hugetlb_fault+0xa50/0x2c30
trace_clock_x86_tsc+0x20/0x20
do_user_addr_fault+0xace/0x1490
exc_page_fault+0x64/0x100
asm_exc_page_fault+0x26/0x30
RIP: 0033:0x402619
</TASK>
INFO: task repro_20250402_:13250 blocked for more than 65 seconds.
Not tainted 6.15.0-rc3+ #24
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro_20250402_ state:D stack:28288 pid:13250 tgid:13228 ppid:3513 task_flags:0x400040 flags:0x00000006
Call Trace:
<TASK>
__schedule+0x1755/0x4f50
schedule+0x158/0x330
io_schedule+0x92/0x110
folio_wait_bit_common+0x69a/0xba0
__filemap_get_folio+0x154/0xb70
hugetlb_fault+0xa50/0x2c30
trace_clock_x86_tsc+0x20/0x20
do_user_addr_fault+0xace/0x1490
exc_page_fault+0x64/0x100
asm_exc_page_fault+0x26/0x30
RIP: 0033:0x402619
</TASK>
Showing all locks held in the system:
1 lock held by khungtaskd/35:
#0: ffffffff879a7440 (rcu_read_lock){....}-{1:3}, at: debug_show_all_locks+0x30/0x180
2 locks held by repro_20250402_/13229:
#0: ffff888017d801e0 (&mm->mmap_lock){++++}-{4:4}, at: lock_mm_and_find_vma+0x37/0x300
#1: ffff888000fec848 (&hugetlb_fault_mutex_table[i]){+.+.}-{4:4}, at: hugetlb_wp+0xf88/0x3440
3 locks held by repro_20250402_/13250:
#0: ffff8880177f3d08 (vm_lock){++++}-{0:0}, at: do_user_addr_fault+0x41b/0x1490
#1: ffff888000fec848 (&hugetlb_fault_mutex_table[i]){+.+.}-{4:4}, at: hugetlb_fault+0x3b8/0x2c30
#2: ffff8880129500e8 (&resv_map->rw_sema){++++}-{4:4}, at: hugetlb_fault+0x494/0x2c30
Link: https://drive.google.com/file/d/1DVRnIW-vSayU5J1re9Ct_br3jJQU6Vpb/view?usp=… [1]
Link: https://github.com/bboymimi/bpftracer/blob/master/scripts/hugetlb_lock_debu… [2]
Link: https://drive.google.com/file/d/1bWq2-8o-BJAuhoHWX7zAhI6ggfhVzQUI/view?usp=… [3]
Link: https://lkml.kernel.org/r/20250513093448.592150-1-gavinguo@igalia.com
Fixes: 40549ba8f8e0 ("hugetlb: use new vma_lock for pmd sharing synchronization")
Signed-off-by: Gavin Guo <gavinguo(a)igalia.com>
Cc: Hugh Dickins <hughd(a)google.com>
Cc: Florent Revest <revest(a)google.com>
Cc: Gavin Shan <gshan(a)redhat.com>
Cc: Muchun Song <muchun.song(a)linux.dev>
Cc: Oscar Salvador <osalvador(a)suse.de>
Cc: Byungchul Park <byungchul(a)sk.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
mm/hugetlb.c | 33 ++++++++++++++++++++++++++++-----
1 file changed, 28 insertions(+), 5 deletions(-)
--- a/mm/hugetlb.c~mm-hugetlb-fix-a-deadlock-with-pagecache_folio-and-hugetlb_fault_mutex_table
+++ a/mm/hugetlb.c
@@ -6131,7 +6131,8 @@ static void unmap_ref_private(struct mm_
* Keep the pte_same checks anyway to make transition from the mutex easier.
*/
static vm_fault_t hugetlb_wp(struct folio *pagecache_folio,
- struct vm_fault *vmf)
+ struct vm_fault *vmf,
+ bool *pagecache_folio_unlocked)
{
struct vm_area_struct *vma = vmf->vma;
struct mm_struct *mm = vma->vm_mm;
@@ -6229,6 +6230,22 @@ retry_avoidcopy:
folio_put(old_folio);
/*
+ * The pagecache_folio needs to be unlocked to avoid
+ * deadlock and we won't re-lock it in hugetlb_wp(). The
+ * pagecache_folio could be truncated after being
+ * unlocked. So its state should not be relied
+ * subsequently.
+ *
+ * Setting *pagecache_folio_unlocked to true allows the
+ * caller to handle any necessary logic related to the
+ * folio's unlocked state.
+ */
+ if (pagecache_folio) {
+ folio_unlock(pagecache_folio);
+ if (pagecache_folio_unlocked)
+ *pagecache_folio_unlocked = true;
+ }
+ /*
* Drop hugetlb_fault_mutex and vma_lock before
* unmapping. unmapping needs to hold vma_lock
* in write mode. Dropping vma_lock in read mode
@@ -6581,7 +6598,7 @@ static vm_fault_t hugetlb_no_page(struct
hugetlb_count_add(pages_per_huge_page(h), mm);
if ((vmf->flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED)) {
/* Optimization, do the COW without a second fault */
- ret = hugetlb_wp(folio, vmf);
+ ret = hugetlb_wp(folio, vmf, NULL);
}
spin_unlock(vmf->ptl);
@@ -6653,6 +6670,7 @@ vm_fault_t hugetlb_fault(struct mm_struc
struct hstate *h = hstate_vma(vma);
struct address_space *mapping;
int need_wait_lock = 0;
+ bool pagecache_folio_unlocked = false;
struct vm_fault vmf = {
.vma = vma,
.address = address & huge_page_mask(h),
@@ -6807,7 +6825,8 @@ vm_fault_t hugetlb_fault(struct mm_struc
if (flags & (FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE)) {
if (!huge_pte_write(vmf.orig_pte)) {
- ret = hugetlb_wp(pagecache_folio, &vmf);
+ ret = hugetlb_wp(pagecache_folio, &vmf,
+ &pagecache_folio_unlocked);
goto out_put_page;
} else if (likely(flags & FAULT_FLAG_WRITE)) {
vmf.orig_pte = huge_pte_mkdirty(vmf.orig_pte);
@@ -6824,10 +6843,14 @@ out_put_page:
out_ptl:
spin_unlock(vmf.ptl);
- if (pagecache_folio) {
+ /*
+ * If the pagecache_folio is unlocked in hugetlb_wp(), we skip
+ * folio_unlock() here.
+ */
+ if (pagecache_folio && !pagecache_folio_unlocked)
folio_unlock(pagecache_folio);
+ if (pagecache_folio)
folio_put(pagecache_folio);
- }
out_mutex:
hugetlb_vma_unlock_read(vma);
_
Patches currently in -mm which might be from gavinguo(a)igalia.com are
mm-hugetlb-fix-a-deadlock-with-pagecache_folio-and-hugetlb_fault_mutex_table.patch
V4: add read-back for non-DPG case. This is for protection
purpose as it is not used for producton.
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. Adding
register read-back after written at function end is to ensure
all register writes are done before they can be used.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Cc: stable(a)vger.kernel.org
Signed-off-by: David (Ming Qiang) Wu <David.Wu3(a)amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello(a)amd.com>
Tested-by: Mario Limonciello <mario.limonciello(a)amd.com>
---
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
index ed00d35039c1..a09f9a2dd471 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
@@ -1034,6 +1034,10 @@ static int vcn_v4_0_5_start_dpg_mode(struct amdgpu_vcn_inst *vinst,
ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
VCN_RB1_DB_CTRL__EN_MASK);
+ /* Keeping one read-back to ensure all register writes are done, otherwise
+ * it may introduce race conditions */
+ RREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL);
+
return 0;
}
@@ -1216,6 +1220,10 @@ static int vcn_v4_0_5_start(struct amdgpu_vcn_inst *vinst)
WREG32_SOC15(VCN, i, regVCN_RB_ENABLE, tmp);
fw_shared->sq.queue_mode &= ~(FW_QUEUE_RING_RESET | FW_QUEUE_DPG_HOLD_OFF);
+ /* Keeping one read-back to ensure all register writes are done, otherwise
+ * it may introduce race conditions */
+ RREG32_SOC15(VCN, i, regVCN_RB_ENABLE);
+
return 0;
}
--
2.34.1
The series contains several small patches to fix various
issues in the pinctrl driver for Armada 3700.
Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com>
---
Gabor Juhos (7):
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 35 ++++++++++++++++-------------
1 file changed, 20 insertions(+), 15 deletions(-)
---
base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3
change-id: 20250512-pinctrl-a37xx-fixes-98fabc45cb11
Best regards,
--
Gabor Juhos <j4g8y7(a)gmail.com>
V2: not to add extra read-back in vcn_v4_0_5_start as there is a
read-back already. New comment for better understanding.
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. The read-back
of regVCN_RB1_DB_CTRL register after written is to ensure the
doorbell_index is updated before it can work properly.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Cc: stable(a)vger.kernel.org
Signed-off-by: David (Ming Qiang) Wu <David.Wu3(a)amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello(a)amd.com>
Tested-by: Mario Limonciello <mario.limonciello(a)amd.com>
Reviewed-by: Alex Deucher <alexander.deucher(a)amd.com>
---
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
index ed00d35039c1..e55b76d71367 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
@@ -1034,6 +1034,10 @@ static int vcn_v4_0_5_start_dpg_mode(struct amdgpu_vcn_inst *vinst,
ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
VCN_RB1_DB_CTRL__EN_MASK);
+ /* Keeping one read-back to ensure all register writes are done, otherwise
+ * it may introduce race conditions */
+ RREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL);
+
return 0;
}
--
2.34.1
From: Johannes Berg <johannes.berg(a)intel.com>
[ Upstream commit 9ad7974856926129f190ffbe3beea78460b3b7cc ]
If it looks like there's another subframe in the A-MSDU
but the header isn't fully there, we can end up reading
data out of bounds, only to discard later. Make this a
bit more careful and check if the subframe header can
even be present.
Reported-by: syzbot+d050d437fe47d479d210(a)syzkaller.appspotmail.com
Link: https://msgid.link/20240226203405.a731e2c95e38.I82ce7d8c0cc8970ce29d0a39fdc…
Signed-off-by: Johannes Berg <johannes.berg(a)intel.com>
[Minor conflict resolved due to code context change. And routine
ieee80211_is_valid_amsdu is introduced by commit fe4a6d2db3ba
("wifi: mac80211: implement support for yet another mesh A-MSDU format")
after 6.4.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
net/wireless/util.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6ebc6567b287..0fd48361e3e1 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -751,24 +751,27 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
struct sk_buff *frame = NULL;
u16 ethertype;
u8 *payload;
- int offset = 0, remaining;
+ int offset = 0;
struct ethhdr eth;
bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb);
bool reuse_skb = false;
bool last = false;
while (!last) {
+ int remaining = skb->len - offset;
unsigned int subframe_len;
int len;
u8 padding;
+ if (sizeof(eth) > remaining)
+ goto purge;
+
skb_copy_bits(skb, offset, ð, sizeof(eth));
len = ntohs(eth.h_proto);
subframe_len = sizeof(struct ethhdr) + len;
padding = (4 - subframe_len) & 0x3;
/* the last MSDU has no padding */
- remaining = skb->len - offset;
if (subframe_len > remaining)
goto purge;
/* mitigate A-MSDU aggregation injection attacks */
--
2.34.1
From: Filipe Manana <fdmanana(a)suse.com>
commit a0f0cf8341e34e5d2265bfd3a7ad68342da1e2aa upstream.
When using the flushoncommit mount option, during almost every transaction
commit we trigger a warning from __writeback_inodes_sb_nr():
$ cat fs/fs-writeback.c:
(...)
static void __writeback_inodes_sb_nr(struct super_block *sb, ...
{
(...)
WARN_ON(!rwsem_is_locked(&sb->s_umount));
(...)
}
(...)
The trace produced in dmesg looks like the following:
[947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3
[947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif
[947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186
[947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3
[947.502097] Code: 24 10 4c 89 44 24 18 c6 (...)
[947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246
[947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000
[947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50
[947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000
[947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488
[947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460
[947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000
[947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0
[947.571072] Call Trace:
[947.572354] <TASK>
[947.573266] btrfs_commit_transaction+0x1f1/0x998
[947.576785] ? start_transaction+0x3ab/0x44e
[947.579867] ? schedule_timeout+0x8a/0xdd
[947.582716] transaction_kthread+0xe9/0x156
[947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407
[947.590104] kthread+0x131/0x139
[947.592168] ? set_kthread_struct+0x32/0x32
[947.595174] ret_from_fork+0x22/0x30
[947.597561] </TASK>
[947.598553] ---[ end trace 644721052755541c ]---
This is because we started using writeback_inodes_sb() to flush delalloc
when committing a transaction (when using -o flushoncommit), in order to
avoid deadlocks with filesystem freeze operations. This change was made
by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots
in flushoncommit"). After that change we started producing that warning,
and every now and then a user reports this since the warning happens too
often, it spams dmesg/syslog, and a user is unsure if this reflects any
problem that might compromise the filesystem's reliability.
We can not just lock the sb->s_umount semaphore before calling
writeback_inodes_sb(), because that would at least deadlock with
filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem()
is called while we are holding that semaphore in write mode, and that can
trigger a transaction commit, resulting in a deadlock. It would also
trigger the same type of deadlock in the unmount path. Possibly, it could
also introduce some other locking dependencies that lockdep would report.
To fix this call try_to_writeback_inodes_sb() instead of
writeback_inodes_sb(), because that will try to read lock sb->s_umount
and then will only call writeback_inodes_sb() if it was able to lock it.
This is fine because the cases where it can't read lock sb->s_umount
are during a filesystem unmount or during a filesystem freeze - in those
cases sb->s_umount is write locked and sync_filesystem() is called, which
calls writeback_inodes_sb(). In other words, in all cases where we can't
take a read lock on sb->s_umount, writeback is already being triggered
elsewhere.
An alternative would be to call btrfs_start_delalloc_roots() with a
number of pages different from LONG_MAX, for example matching the number
of delalloc bytes we currently have, in which case we would end up
starting all delalloc with filemap_fdatawrite_wbc() and not with an
async flush via filemap_flush() - that is only possible after the rather
recent commit e076ab2a2ca70a ("btrfs: shrink delalloc pages instead of
full inodes"). However that creates a whole new can of worms due to new
lock dependencies, which lockdep complains, like for example:
[ 8948.247280] ======================================================
[ 8948.247823] WARNING: possible circular locking dependency detected
[ 8948.248353] 5.17.0-rc1-btrfs-next-111 #1 Not tainted
[ 8948.248786] ------------------------------------------------------
[ 8948.249320] kworker/u16:18/933570 is trying to acquire lock:
[ 8948.249812] ffff9b3de1591690 (sb_internal#2){.+.+}-{0:0}, at: find_free_extent+0x141e/0x1590 [btrfs]
[ 8948.250638]
but task is already holding lock:
[ 8948.251140] ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs]
[ 8948.252018]
which lock already depends on the new lock.
[ 8948.252710]
the existing dependency chain (in reverse order) is:
[ 8948.253343]
-> #2 (&root->delalloc_mutex){+.+.}-{3:3}:
[ 8948.253950] __mutex_lock+0x90/0x900
[ 8948.254354] start_delalloc_inodes+0x78/0x400 [btrfs]
[ 8948.254859] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs]
[ 8948.255408] btrfs_commit_transaction+0x32f/0xc00 [btrfs]
[ 8948.255942] btrfs_mksubvol+0x380/0x570 [btrfs]
[ 8948.256406] btrfs_mksnapshot+0x81/0xb0 [btrfs]
[ 8948.256870] __btrfs_ioctl_snap_create+0x17f/0x190 [btrfs]
[ 8948.257413] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs]
[ 8948.257961] btrfs_ioctl+0x1196/0x3630 [btrfs]
[ 8948.258418] __x64_sys_ioctl+0x83/0xb0
[ 8948.258793] do_syscall_64+0x3b/0xc0
[ 8948.259146] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 8948.259709]
-> #1 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}:
[ 8948.260330] __mutex_lock+0x90/0x900
[ 8948.260692] btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs]
[ 8948.261234] btrfs_commit_transaction+0x32f/0xc00 [btrfs]
[ 8948.261766] btrfs_set_free_space_cache_v1_active+0x38/0x60 [btrfs]
[ 8948.262379] btrfs_start_pre_rw_mount+0x119/0x180 [btrfs]
[ 8948.262909] open_ctree+0x1511/0x171e [btrfs]
[ 8948.263359] btrfs_mount_root.cold+0x12/0xde [btrfs]
[ 8948.263863] legacy_get_tree+0x30/0x50
[ 8948.264242] vfs_get_tree+0x28/0xc0
[ 8948.264594] vfs_kern_mount.part.0+0x71/0xb0
[ 8948.265017] btrfs_mount+0x11d/0x3a0 [btrfs]
[ 8948.265462] legacy_get_tree+0x30/0x50
[ 8948.265851] vfs_get_tree+0x28/0xc0
[ 8948.266203] path_mount+0x2d4/0xbe0
[ 8948.266554] __x64_sys_mount+0x103/0x140
[ 8948.266940] do_syscall_64+0x3b/0xc0
[ 8948.267300] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 8948.267790]
-> #0 (sb_internal#2){.+.+}-{0:0}:
[ 8948.268322] __lock_acquire+0x12e8/0x2260
[ 8948.268733] lock_acquire+0xd7/0x310
[ 8948.269092] start_transaction+0x44c/0x6e0 [btrfs]
[ 8948.269591] find_free_extent+0x141e/0x1590 [btrfs]
[ 8948.270087] btrfs_reserve_extent+0x14b/0x280 [btrfs]
[ 8948.270588] cow_file_range+0x17e/0x490 [btrfs]
[ 8948.271051] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs]
[ 8948.271586] writepage_delalloc+0xb5/0x170 [btrfs]
[ 8948.272071] __extent_writepage+0x156/0x3c0 [btrfs]
[ 8948.272579] extent_write_cache_pages+0x263/0x460 [btrfs]
[ 8948.273113] extent_writepages+0x76/0x130 [btrfs]
[ 8948.273573] do_writepages+0xd2/0x1c0
[ 8948.273942] filemap_fdatawrite_wbc+0x68/0x90
[ 8948.274371] start_delalloc_inodes+0x17f/0x400 [btrfs]
[ 8948.274876] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs]
[ 8948.275417] flush_space+0x1f2/0x630 [btrfs]
[ 8948.275863] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs]
[ 8948.276438] process_one_work+0x252/0x5a0
[ 8948.276829] worker_thread+0x55/0x3b0
[ 8948.277189] kthread+0xf2/0x120
[ 8948.277506] ret_from_fork+0x22/0x30
[ 8948.277868]
other info that might help us debug this:
[ 8948.278548] Chain exists of:
sb_internal#2 --> &fs_info->delalloc_root_mutex --> &root->delalloc_mutex
[ 8948.279601] Possible unsafe locking scenario:
[ 8948.280102] CPU0 CPU1
[ 8948.280508] ---- ----
[ 8948.280915] lock(&root->delalloc_mutex);
[ 8948.281271] lock(&fs_info->delalloc_root_mutex);
[ 8948.281915] lock(&root->delalloc_mutex);
[ 8948.282487] lock(sb_internal#2);
[ 8948.282800]
*** DEADLOCK ***
[ 8948.283333] 4 locks held by kworker/u16:18/933570:
[ 8948.283750] #0: ffff9b3dc00a9d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0
[ 8948.284609] #1: ffffa90349dafe70 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0
[ 8948.285637] #2: ffff9b3e14db5040 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}, at: btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs]
[ 8948.286674] #3: ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs]
[ 8948.287596]
stack backtrace:
[ 8948.287975] CPU: 3 PID: 933570 Comm: kworker/u16:18 Not tainted 5.17.0-rc1-btrfs-next-111 #1
[ 8948.288677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 8948.289649] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
[ 8948.290298] Call Trace:
[ 8948.290517] <TASK>
[ 8948.290700] dump_stack_lvl+0x59/0x73
[ 8948.291026] check_noncircular+0xf3/0x110
[ 8948.291375] ? start_transaction+0x228/0x6e0 [btrfs]
[ 8948.291826] __lock_acquire+0x12e8/0x2260
[ 8948.292241] lock_acquire+0xd7/0x310
[ 8948.292714] ? find_free_extent+0x141e/0x1590 [btrfs]
[ 8948.293241] ? lock_is_held_type+0xea/0x140
[ 8948.293601] start_transaction+0x44c/0x6e0 [btrfs]
[ 8948.294055] ? find_free_extent+0x141e/0x1590 [btrfs]
[ 8948.294518] find_free_extent+0x141e/0x1590 [btrfs]
[ 8948.294957] ? _raw_spin_unlock+0x29/0x40
[ 8948.295312] ? btrfs_get_alloc_profile+0x124/0x290 [btrfs]
[ 8948.295813] btrfs_reserve_extent+0x14b/0x280 [btrfs]
[ 8948.296270] cow_file_range+0x17e/0x490 [btrfs]
[ 8948.296691] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs]
[ 8948.297175] ? find_lock_delalloc_range+0x247/0x270 [btrfs]
[ 8948.297678] writepage_delalloc+0xb5/0x170 [btrfs]
[ 8948.298123] __extent_writepage+0x156/0x3c0 [btrfs]
[ 8948.298570] extent_write_cache_pages+0x263/0x460 [btrfs]
[ 8948.299061] extent_writepages+0x76/0x130 [btrfs]
[ 8948.299495] do_writepages+0xd2/0x1c0
[ 8948.299817] ? sched_clock_cpu+0xd/0x110
[ 8948.300160] ? lock_release+0x155/0x4a0
[ 8948.300494] filemap_fdatawrite_wbc+0x68/0x90
[ 8948.300874] ? do_raw_spin_unlock+0x4b/0xa0
[ 8948.301243] start_delalloc_inodes+0x17f/0x400 [btrfs]
[ 8948.301706] ? lock_release+0x155/0x4a0
[ 8948.302055] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs]
[ 8948.302564] flush_space+0x1f2/0x630 [btrfs]
[ 8948.302970] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs]
[ 8948.303510] process_one_work+0x252/0x5a0
[ 8948.303860] ? process_one_work+0x5a0/0x5a0
[ 8948.304221] worker_thread+0x55/0x3b0
[ 8948.304543] ? process_one_work+0x5a0/0x5a0
[ 8948.304904] kthread+0xf2/0x120
[ 8948.305184] ? kthread_complete_and_exit+0x20/0x20
[ 8948.305598] ret_from_fork+0x22/0x30
[ 8948.305921] </TASK>
It all comes from the fact that btrfs_start_delalloc_roots() takes the
delalloc_root_mutex, in the transaction commit path we are holding a
read lock on one of the superblock's freeze semaphores (via
sb_start_intwrite()), the async reclaim task can also do a call to
btrfs_start_delalloc_roots(), which ends up triggering writeback with
calls to filemap_fdatawrite_wbc(), resulting in extent allocation which
in turn can call btrfs_start_transaction(), which will result in taking
the freeze semaphore via sb_start_intwrite(), forming a nasty dependency
on all those locks which can be taken in different orders by different
code paths.
So just adopt the simple approach of calling try_to_writeback_inodes_sb()
at btrfs_start_delalloc_flush().
Link: https://lore.kernel.org/linux-btrfs/20220130005258.GA7465@cuci.nl/
Link: https://lore.kernel.org/linux-btrfs/43acc426-d683-d1b6-729d-c6bc4a2fff4d@gm…
Link: https://lore.kernel.org/linux-btrfs/6833930a-08d7-6fbc-0141-eb9cdfd6bb4d@gm…
Link: https://lore.kernel.org/linux-btrfs/20190322041731.GF16651@hungrycats.org/
Reviewed-by: Omar Sandoval <osandov(a)fb.com>
Signed-off-by: Filipe Manana <fdmanana(a)suse.com>
[ add more link reports ]
Signed-off-by: David Sterba <dsterba(a)suse.com>
[Minor context change fixed]
Signed-off-by: Zhi Yang <Zhi.Yang(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
fs/btrfs/transaction.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 21a5a963c70e..8c0703f8037b 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -2021,16 +2021,24 @@ static inline int btrfs_start_delalloc_flush(struct btrfs_trans_handle *trans)
struct btrfs_fs_info *fs_info = trans->fs_info;
/*
- * We use writeback_inodes_sb here because if we used
+ * We use try_to_writeback_inodes_sb() here because if we used
* btrfs_start_delalloc_roots we would deadlock with fs freeze.
* Currently are holding the fs freeze lock, if we do an async flush
* we'll do btrfs_join_transaction() and deadlock because we need to
* wait for the fs freeze lock. Using the direct flushing we benefit
* from already being in a transaction and our join_transaction doesn't
* have to re-take the fs freeze lock.
+ *
+ * Note that try_to_writeback_inodes_sb() will only trigger writeback
+ * if it can read lock sb->s_umount. It will always be able to lock it,
+ * except when the filesystem is being unmounted or being frozen, but in
+ * those cases sync_filesystem() is called, which results in calling
+ * writeback_inodes_sb() while holding a write lock on sb->s_umount.
+ * Note that we don't call writeback_inodes_sb() directly, because it
+ * will emit a warning if sb->s_umount is not locked.
*/
if (btrfs_test_opt(fs_info, FLUSHONCOMMIT)) {
- writeback_inodes_sb(fs_info->sb, WB_REASON_SYNC);
+ try_to_writeback_inodes_sb(fs_info->sb, WB_REASON_SYNC);
} else {
struct btrfs_pending_snapshot *pending;
struct list_head *head = &trans->transaction->pending_snapshots;
--
2.34.1
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x ab00ddd802f80e31fc9639c652d736fe3913feae
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051243-handprint-impulse-c20a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ab00ddd802f80e31fc9639c652d736fe3913feae Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang(a)linux.alibaba.com>
Date: Wed, 23 Apr 2025 18:36:45 +0800
Subject: [PATCH] selftests/mm: compaction_test: support platform with huge
mount of memory
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang(a)linux.alibaba.com>
Acked-by: Dev Jain <dev.jain(a)arm.com>
Reviewed-by: Baolin Wang <baolin.wang(a)linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang(a)inux.alibaba.com>
Cc: Shuah Khan <shuah(a)kernel.org>
Cc: Sri Jayaramappa <sjayaram(a)akamai.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
diff --git a/tools/testing/selftests/mm/compaction_test.c b/tools/testing/selftests/mm/compaction_test.c
index 2c3a0eb6b22d..9bc4591c7b16 100644
--- a/tools/testing/selftests/mm/compaction_test.c
+++ b/tools/testing/selftests/mm/compaction_test.c
@@ -90,6 +90,8 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
int compaction_index = 0;
char nr_hugepages[20] = {0};
char init_nr_hugepages[24] = {0};
+ char target_nr_hugepages[24] = {0};
+ int slen;
snprintf(init_nr_hugepages, sizeof(init_nr_hugepages),
"%lu", initial_nr_hugepages);
@@ -106,11 +108,18 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
goto out;
}
- /* Request a large number of huge pages. The Kernel will allocate
- as much as it can */
- if (write(fd, "100000", (6*sizeof(char))) != (6*sizeof(char))) {
- ksft_print_msg("Failed to write 100000 to /proc/sys/vm/nr_hugepages: %s\n",
- strerror(errno));
+ /*
+ * Request huge pages for about half of the free memory. The Kernel
+ * will allocate as much as it can, and we expect it will get at least 1/3
+ */
+ nr_hugepages_ul = mem_free / hugepage_size / 2;
+ snprintf(target_nr_hugepages, sizeof(target_nr_hugepages),
+ "%lu", nr_hugepages_ul);
+
+ slen = strlen(target_nr_hugepages);
+ if (write(fd, target_nr_hugepages, slen) != slen) {
+ ksft_print_msg("Failed to write %lu to /proc/sys/vm/nr_hugepages: %s\n",
+ nr_hugepages_ul, strerror(errno));
goto close_fd;
}
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 94cff94634e506a4a44684bee1875d2dbf782722
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051257-skater-skeleton-9a3d@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 94cff94634e506a4a44684bee1875d2dbf782722 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Date: Fri, 4 Apr 2025 15:31:16 +0200
Subject: [PATCH] clocksource/i8253: Use raw_spinlock_irqsave() in
clockevent_i8253_disable()
On x86 during boot, clockevent_i8253_disable() can be invoked via
x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens
with enabled interrupts.
If some of the old i8253 hardware is actually used then lockdep will notice
that i8253_lock is used in hard interrupt context. This causes lockdep to
complain because it observed the lock being acquired with interrupts
enabled and in hard interrupt context.
Make clockevent_i8253_disable() acquire the lock with
raw_spinlock_irqsave() to cure this.
[ tglx: Massage change log and use guard() ]
Fixes: c8c4076723dac ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Cc: stable(a)vger.kernel.org
Link: https://lore.kernel.org/all/20250404133116.p-XRWJXf@linutronix.de
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 39f7c2d736d1..b603c25f3dfa 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -103,7 +103,7 @@ int __init clocksource_i8253_init(void)
#ifdef CONFIG_CLKEVT_I8253
void clockevent_i8253_disable(void)
{
- raw_spin_lock(&i8253_lock);
+ guard(raw_spinlock_irqsave)(&i8253_lock);
/*
* Writing the MODE register should stop the counter, according to
@@ -132,8 +132,6 @@ void clockevent_i8253_disable(void)
outb_p(0, PIT_CH0);
outb_p(0x30, PIT_MODE);
-
- raw_spin_unlock(&i8253_lock);
}
static int pit_shutdown(struct clock_event_device *evt)
From: Johannes Berg <johannes.berg(a)intel.com>
[ Upstream commit 9ad7974856926129f190ffbe3beea78460b3b7cc ]
If it looks like there's another subframe in the A-MSDU
but the header isn't fully there, we can end up reading
data out of bounds, only to discard later. Make this a
bit more careful and check if the subframe header can
even be present.
Reported-by: syzbot+d050d437fe47d479d210(a)syzkaller.appspotmail.com
Link: https://msgid.link/20240226203405.a731e2c95e38.I82ce7d8c0cc8970ce29d0a39fdc…
Signed-off-by: Johannes Berg <johannes.berg(a)intel.com>
[Minor conflict resolved due to code context change. And routine
ieee80211_is_valid_amsdu is introduced by commit fe4a6d2db3ba
("wifi: mac80211: implement support for yet another mesh A-MSDU format")
after 6.4.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
net/wireless/util.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6ebc6567b287..0fd48361e3e1 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -751,24 +751,27 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
struct sk_buff *frame = NULL;
u16 ethertype;
u8 *payload;
- int offset = 0, remaining;
+ int offset = 0;
struct ethhdr eth;
bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb);
bool reuse_skb = false;
bool last = false;
while (!last) {
+ int remaining = skb->len - offset;
unsigned int subframe_len;
int len;
u8 padding;
+ if (sizeof(eth) > remaining)
+ goto purge;
+
skb_copy_bits(skb, offset, ð, sizeof(eth));
len = ntohs(eth.h_proto);
subframe_len = sizeof(struct ethhdr) + len;
padding = (4 - subframe_len) & 0x3;
/* the last MSDU has no padding */
- remaining = skb->len - offset;
if (subframe_len > remaining)
goto purge;
/* mitigate A-MSDU aggregation injection attacks */
--
2.34.1
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x f31fe8165d365379d858c53bef43254c7d6d1cfd
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051208-hardly-dole-1422@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f31fe8165d365379d858c53bef43254c7d6d1cfd Mon Sep 17 00:00:00 2001
From: Naman Jain <namjain(a)linux.microsoft.com>
Date: Fri, 2 May 2025 13:18:10 +0530
Subject: [PATCH] uio_hv_generic: Fix sysfs creation path for ring buffer
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes: 9ab877a6ccf8 ("uio_hv_generic: make ring buffer attribute for primary channel")
Cc: stable(a)kernel.org
Suggested-by: Saurabh Sengar <ssengar(a)linux.microsoft.com>
Suggested-by: Michael Kelley <mhklinux(a)outlook.com>
Reviewed-by: Michael Kelley <mhklinux(a)outlook.com>
Tested-by: Michael Kelley <mhklinux(a)outlook.com>
Reviewed-by: Dexuan Cui <decui(a)microsoft.com>
Signed-off-by: Naman Jain <namjain(a)linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 29780f3a7478..0b450e53161e 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -477,4 +477,10 @@ static inline int hv_debug_add_dev_dir(struct hv_device *dev)
#endif /* CONFIG_HYPERV_TESTING */
+/* Create and remove sysfs entry for memory mapped ring buffers for a channel */
+int hv_create_ring_sysfs(struct vmbus_channel *channel,
+ int (*hv_mmap_ring_buffer)(struct vmbus_channel *channel,
+ struct vm_area_struct *vma));
+int hv_remove_ring_sysfs(struct vmbus_channel *channel);
+
#endif /* _HYPERV_VMBUS_H */
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 8d3cff42bdbb..0f16a83cc2d6 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1802,6 +1802,27 @@ static ssize_t subchannel_id_show(struct vmbus_channel *channel,
}
static VMBUS_CHAN_ATTR_RO(subchannel_id);
+static int hv_mmap_ring_buffer_wrapper(struct file *filp, struct kobject *kobj,
+ const struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ struct vmbus_channel *channel = container_of(kobj, struct vmbus_channel, kobj);
+
+ /*
+ * hv_(create|remove)_ring_sysfs implementation ensures that mmap_ring_buffer
+ * is not NULL.
+ */
+ return channel->mmap_ring_buffer(channel, vma);
+}
+
+static struct bin_attribute chan_attr_ring_buffer = {
+ .attr = {
+ .name = "ring",
+ .mode = 0600,
+ },
+ .size = 2 * SZ_2M,
+ .mmap = hv_mmap_ring_buffer_wrapper,
+};
static struct attribute *vmbus_chan_attrs[] = {
&chan_attr_out_mask.attr,
&chan_attr_in_mask.attr,
@@ -1821,6 +1842,11 @@ static struct attribute *vmbus_chan_attrs[] = {
NULL
};
+static struct bin_attribute *vmbus_chan_bin_attrs[] = {
+ &chan_attr_ring_buffer,
+ NULL
+};
+
/*
* Channel-level attribute_group callback function. Returns the permission for
* each attribute, and returns 0 if an attribute is not visible.
@@ -1841,9 +1867,24 @@ static umode_t vmbus_chan_attr_is_visible(struct kobject *kobj,
return attr->mode;
}
+static umode_t vmbus_chan_bin_attr_is_visible(struct kobject *kobj,
+ const struct bin_attribute *attr, int idx)
+{
+ const struct vmbus_channel *channel =
+ container_of(kobj, struct vmbus_channel, kobj);
+
+ /* Hide ring attribute if channel's ring_sysfs_visible is set to false */
+ if (attr == &chan_attr_ring_buffer && !channel->ring_sysfs_visible)
+ return 0;
+
+ return attr->attr.mode;
+}
+
static const struct attribute_group vmbus_chan_group = {
.attrs = vmbus_chan_attrs,
- .is_visible = vmbus_chan_attr_is_visible
+ .bin_attrs = vmbus_chan_bin_attrs,
+ .is_visible = vmbus_chan_attr_is_visible,
+ .is_bin_visible = vmbus_chan_bin_attr_is_visible,
};
static const struct kobj_type vmbus_chan_ktype = {
@@ -1851,6 +1892,63 @@ static const struct kobj_type vmbus_chan_ktype = {
.release = vmbus_chan_release,
};
+/**
+ * hv_create_ring_sysfs() - create "ring" sysfs entry corresponding to ring buffers for a channel.
+ * @channel: Pointer to vmbus_channel structure
+ * @hv_mmap_ring_buffer: function pointer for initializing the function to be called on mmap of
+ * channel's "ring" sysfs node, which is for the ring buffer of that channel.
+ * Function pointer is of below type:
+ * int (*hv_mmap_ring_buffer)(struct vmbus_channel *channel,
+ * struct vm_area_struct *vma))
+ * This has a pointer to the channel and a pointer to vm_area_struct,
+ * used for mmap, as arguments.
+ *
+ * Sysfs node for ring buffer of a channel is created along with other fields, however its
+ * visibility is disabled by default. Sysfs creation needs to be controlled when the use-case
+ * is running.
+ * For example, HV_NIC device is used either by uio_hv_generic or hv_netvsc at any given point of
+ * time, and "ring" sysfs is needed only when uio_hv_generic is bound to that device. To avoid
+ * exposing the ring buffer by default, this function is reponsible to enable visibility of
+ * ring for userspace to use.
+ * Note: Race conditions can happen with userspace and it is not encouraged to create new
+ * use-cases for this. This was added to maintain backward compatibility, while solving
+ * one of the race conditions in uio_hv_generic while creating sysfs.
+ *
+ * Returns 0 on success or error code on failure.
+ */
+int hv_create_ring_sysfs(struct vmbus_channel *channel,
+ int (*hv_mmap_ring_buffer)(struct vmbus_channel *channel,
+ struct vm_area_struct *vma))
+{
+ struct kobject *kobj = &channel->kobj;
+
+ channel->mmap_ring_buffer = hv_mmap_ring_buffer;
+ channel->ring_sysfs_visible = true;
+
+ return sysfs_update_group(kobj, &vmbus_chan_group);
+}
+EXPORT_SYMBOL_GPL(hv_create_ring_sysfs);
+
+/**
+ * hv_remove_ring_sysfs() - remove ring sysfs entry corresponding to ring buffers for a channel.
+ * @channel: Pointer to vmbus_channel structure
+ *
+ * Hide "ring" sysfs for a channel by changing its is_visible attribute and updating sysfs group.
+ *
+ * Returns 0 on success or error code on failure.
+ */
+int hv_remove_ring_sysfs(struct vmbus_channel *channel)
+{
+ struct kobject *kobj = &channel->kobj;
+ int ret;
+
+ channel->ring_sysfs_visible = false;
+ ret = sysfs_update_group(kobj, &vmbus_chan_group);
+ channel->mmap_ring_buffer = NULL;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hv_remove_ring_sysfs);
+
/*
* vmbus_add_channel_kobj - setup a sub-directory under device/channels
*/
diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
index 1b19b5647495..69c1df0f4ca5 100644
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -131,15 +131,12 @@ static void hv_uio_rescind(struct vmbus_channel *channel)
vmbus_device_unregister(channel->device_obj);
}
-/* Sysfs API to allow mmap of the ring buffers
+/* Function used for mmap of ring buffer sysfs interface.
* The ring buffer is allocated as contiguous memory by vmbus_open
*/
-static int hv_uio_ring_mmap(struct file *filp, struct kobject *kobj,
- const struct bin_attribute *attr,
- struct vm_area_struct *vma)
+static int
+hv_uio_ring_mmap(struct vmbus_channel *channel, struct vm_area_struct *vma)
{
- struct vmbus_channel *channel
- = container_of(kobj, struct vmbus_channel, kobj);
void *ring_buffer = page_address(channel->ringbuffer_page);
if (channel->state != CHANNEL_OPENED_STATE)
@@ -149,15 +146,6 @@ static int hv_uio_ring_mmap(struct file *filp, struct kobject *kobj,
channel->ringbuffer_pagecount << PAGE_SHIFT);
}
-static const struct bin_attribute ring_buffer_bin_attr = {
- .attr = {
- .name = "ring",
- .mode = 0600,
- },
- .size = 2 * SZ_2M,
- .mmap = hv_uio_ring_mmap,
-};
-
/* Callback from VMBUS subsystem when new channel created. */
static void
hv_uio_new_channel(struct vmbus_channel *new_sc)
@@ -178,8 +166,7 @@ hv_uio_new_channel(struct vmbus_channel *new_sc)
/* Disable interrupts on sub channel */
new_sc->inbound.ring_buffer->interrupt_mask = 1;
set_channel_read_mode(new_sc, HV_CALL_ISR);
-
- ret = sysfs_create_bin_file(&new_sc->kobj, &ring_buffer_bin_attr);
+ ret = hv_create_ring_sysfs(new_sc, hv_uio_ring_mmap);
if (ret) {
dev_err(device, "sysfs create ring bin file failed; %d\n", ret);
vmbus_close(new_sc);
@@ -350,10 +337,18 @@ hv_uio_probe(struct hv_device *dev,
goto fail_close;
}
- ret = sysfs_create_bin_file(&channel->kobj, &ring_buffer_bin_attr);
- if (ret)
- dev_notice(&dev->device,
- "sysfs create ring bin file failed; %d\n", ret);
+ /*
+ * This internally calls sysfs_update_group, which returns a non-zero value if it executes
+ * before sysfs_create_group. This is expected as the 'ring' will be created later in
+ * vmbus_device_register() -> vmbus_add_channel_kobj(). Thus, no need to check the return
+ * value and print warning.
+ *
+ * Creating/exposing sysfs in driver probe is not encouraged as it can lead to race
+ * conditions with userspace. For backward compatibility, "ring" sysfs could not be removed
+ * or decoupled from uio_hv_generic probe. Userspace programs can make use of inotify
+ * APIs to make sure that ring is created.
+ */
+ hv_create_ring_sysfs(channel, hv_uio_ring_mmap);
hv_set_drvdata(dev, pdata);
@@ -375,7 +370,7 @@ hv_uio_remove(struct hv_device *dev)
if (!pdata)
return;
- sysfs_remove_bin_file(&dev->channel->kobj, &ring_buffer_bin_attr);
+ hv_remove_ring_sysfs(dev->channel);
uio_unregister_device(&pdata->info);
hv_uio_cleanup(dev, pdata);
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 675959fb97ba..d6ffe01962c2 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1002,6 +1002,12 @@ struct vmbus_channel {
/* The max size of a packet on this channel */
u32 max_pkt_size;
+
+ /* function to mmap ring buffer memory to the channel's sysfs ring attribute */
+ int (*mmap_ring_buffer)(struct vmbus_channel *channel, struct vm_area_struct *vma);
+
+ /* boolean to control visibility of sysfs for ring buffer */
+ bool ring_sysfs_visible;
};
#define lock_requestor(channel, flags) \
From: Wayne Lin <wayne.lin(a)amd.com>
[ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.
It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.
[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.
Reviewed-by: Jerry Zuo <jerry.zuo(a)amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed(a)amd.com>
Signed-off-by: Wayne Lin <wayne.lin(a)amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com>
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
[The deleted codes in this fix is introduced by commit b9b5a82c5321
("drm/amd/display: Fix DSC-re-computing") after 6.11.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 5eb994ed5471..6bb590bc7c19 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
dc_sink_release(dc_sink);
aconnector->dc_sink = NULL;
aconnector->edid = NULL;
+ aconnector->dsc_aux = NULL;
+ port->passthrough_aux = NULL;
}
aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
dc_sink_release(aconnector->dc_sink);
aconnector->dc_sink = NULL;
aconnector->edid = NULL;
+ aconnector->dsc_aux = NULL;
+ port->passthrough_aux = NULL;
amdgpu_dm_set_mst_status(&aconnector->mst_status,
MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
--
2.34.1
From: Wei Fang <wei.fang(a)nxp.com>
[ Upstream commit c2e0c58b25a0a0c37ec643255558c5af4450c9f5 ]
There is a deadlock issue found in sungem driver, please refer to the
commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid
deadlocks"). The root cause of the issue is that netpoll is in atomic
context and disable_irq() is called by .ndo_poll_controller interface
of sungem driver, however, disable_irq() might sleep. After analyzing
the implementation of fec_poll_controller(), the fec driver should have
the same issue. Due to the fec driver uses NAPI for TX completions, the
.ndo_poll_controller is unnecessary to be implemented in the fec driver,
so fec_poll_controller() can be safely removed.
Fixes: 7f5c6addcdc0 ("net/fec: add poll controller function for fec nic")
Signed-off-by: Wei Fang <wei.fang(a)nxp.com>
Link: https://lore.kernel.org/r/20240511062009.652918-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
[Minor context change fixed]
Signed-off-by: Feng Liu <Feng.Liu3(a)windriver.com>
Signed-off-by: He Zhe <Zhe.He(a)windriver.com>
---
Verified the build test.
---
drivers/net/ethernet/freescale/fec_main.c | 26 -----------------------
1 file changed, 26 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 8e30e999456d..01579719f4ce 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3255,29 +3255,6 @@ fec_set_mac_address(struct net_device *ndev, void *p)
return 0;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/**
- * fec_poll_controller - FEC Poll controller function
- * @dev: The FEC network adapter
- *
- * Polled functionality used by netconsole and others in non interrupt mode
- *
- */
-static void fec_poll_controller(struct net_device *dev)
-{
- int i;
- struct fec_enet_private *fep = netdev_priv(dev);
-
- for (i = 0; i < FEC_IRQ_NUM; i++) {
- if (fep->irq[i] > 0) {
- disable_irq(fep->irq[i]);
- fec_enet_interrupt(fep->irq[i], dev);
- enable_irq(fep->irq[i]);
- }
- }
-}
-#endif
-
static inline void fec_enet_set_netdev_features(struct net_device *netdev,
netdev_features_t features)
{
@@ -3351,9 +3328,6 @@ static const struct net_device_ops fec_netdev_ops = {
.ndo_tx_timeout = fec_timeout,
.ndo_set_mac_address = fec_set_mac_address,
.ndo_do_ioctl = fec_enet_ioctl,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = fec_poll_controller,
-#endif
.ndo_set_features = fec_set_features,
};
--
2.34.1
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 94cff94634e506a4a44684bee1875d2dbf782722
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051256-safeguard-purchase-6c4e@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 94cff94634e506a4a44684bee1875d2dbf782722 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Date: Fri, 4 Apr 2025 15:31:16 +0200
Subject: [PATCH] clocksource/i8253: Use raw_spinlock_irqsave() in
clockevent_i8253_disable()
On x86 during boot, clockevent_i8253_disable() can be invoked via
x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens
with enabled interrupts.
If some of the old i8253 hardware is actually used then lockdep will notice
that i8253_lock is used in hard interrupt context. This causes lockdep to
complain because it observed the lock being acquired with interrupts
enabled and in hard interrupt context.
Make clockevent_i8253_disable() acquire the lock with
raw_spinlock_irqsave() to cure this.
[ tglx: Massage change log and use guard() ]
Fixes: c8c4076723dac ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Cc: stable(a)vger.kernel.org
Link: https://lore.kernel.org/all/20250404133116.p-XRWJXf@linutronix.de
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 39f7c2d736d1..b603c25f3dfa 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -103,7 +103,7 @@ int __init clocksource_i8253_init(void)
#ifdef CONFIG_CLKEVT_I8253
void clockevent_i8253_disable(void)
{
- raw_spin_lock(&i8253_lock);
+ guard(raw_spinlock_irqsave)(&i8253_lock);
/*
* Writing the MODE register should stop the counter, according to
@@ -132,8 +132,6 @@ void clockevent_i8253_disable(void)
outb_p(0, PIT_CH0);
outb_p(0x30, PIT_MODE);
-
- raw_spin_unlock(&i8253_lock);
}
static int pit_shutdown(struct clock_event_device *evt)
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
Cc: stable(a)vger.kernel.org
Tested-by: Haiyong Sun <sunhaiyong(a)loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn>
---
We may use new toolchain to build 6.1/6.6 LTS, backport it to avoid
problems.
arch/loongarch/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index a74bbcb05ee1..f2966745b058 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -55,7 +55,7 @@ endif
ifdef CONFIG_64BIT
ld-emul = $(64bit-emul)
-cflags-y += -mabi=lp64s
+cflags-y += -mabi=lp64s -mcmodel=normal
endif
cflags-y += -pipe -msoft-float
--
2.47.1
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x ab00ddd802f80e31fc9639c652d736fe3913feae
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051243-poster-expiring-81bc@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ab00ddd802f80e31fc9639c652d736fe3913feae Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang(a)linux.alibaba.com>
Date: Wed, 23 Apr 2025 18:36:45 +0800
Subject: [PATCH] selftests/mm: compaction_test: support platform with huge
mount of memory
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang(a)linux.alibaba.com>
Acked-by: Dev Jain <dev.jain(a)arm.com>
Reviewed-by: Baolin Wang <baolin.wang(a)linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang(a)inux.alibaba.com>
Cc: Shuah Khan <shuah(a)kernel.org>
Cc: Sri Jayaramappa <sjayaram(a)akamai.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
diff --git a/tools/testing/selftests/mm/compaction_test.c b/tools/testing/selftests/mm/compaction_test.c
index 2c3a0eb6b22d..9bc4591c7b16 100644
--- a/tools/testing/selftests/mm/compaction_test.c
+++ b/tools/testing/selftests/mm/compaction_test.c
@@ -90,6 +90,8 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
int compaction_index = 0;
char nr_hugepages[20] = {0};
char init_nr_hugepages[24] = {0};
+ char target_nr_hugepages[24] = {0};
+ int slen;
snprintf(init_nr_hugepages, sizeof(init_nr_hugepages),
"%lu", initial_nr_hugepages);
@@ -106,11 +108,18 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
goto out;
}
- /* Request a large number of huge pages. The Kernel will allocate
- as much as it can */
- if (write(fd, "100000", (6*sizeof(char))) != (6*sizeof(char))) {
- ksft_print_msg("Failed to write 100000 to /proc/sys/vm/nr_hugepages: %s\n",
- strerror(errno));
+ /*
+ * Request huge pages for about half of the free memory. The Kernel
+ * will allocate as much as it can, and we expect it will get at least 1/3
+ */
+ nr_hugepages_ul = mem_free / hugepage_size / 2;
+ snprintf(target_nr_hugepages, sizeof(target_nr_hugepages),
+ "%lu", nr_hugepages_ul);
+
+ slen = strlen(target_nr_hugepages);
+ if (write(fd, target_nr_hugepages, slen) != slen) {
+ ksft_print_msg("Failed to write %lu to /proc/sys/vm/nr_hugepages: %s\n",
+ nr_hugepages_ul, strerror(errno));
goto close_fd;
}
Hi Greg
Two patches for synaptics driver seems to not have been backported to 5.4
but have been added to 5.10 and later versions. These patches are:
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tre…
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tre…
I'm sending them after rebasing them to 5.4.
Thanks
RESEND: since I forgot to Cc stable
Aditya Garg (1):
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Dmitry Torokhov (1):
Input: synaptics - enable SMBus for HP Elitebook 850 G1
drivers/input/mouse/synaptics.c | 2 ++
1 file changed, 2 insertions(+)
--
2.49.0
From: Puranjay Mohan <puranjay(a)kernel.org>
[ Upstream commit 19d3c179a37730caf600a97fed3794feac2b197b ]
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Puranjay Mohan <puranjay(a)kernel.org>
Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net>
Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15M…
Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
arch/arm64/net/bpf_jit_comp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index c04ace8f4843..3168343815b3 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1893,7 +1893,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
emit(A64_STR64I(A64_R(20), A64_SP, regs_off + 8), ctx);
if (flags & BPF_TRAMP_F_CALL_ORIG) {
- emit_addr_mov_i64(A64_R(0), (const u64)im, ctx);
+ emit_a64_mov_i64(A64_R(0), (const u64)im, ctx);
emit_call((const u64)__bpf_tramp_enter, ctx);
}
@@ -1937,7 +1937,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
if (flags & BPF_TRAMP_F_CALL_ORIG) {
im->ip_epilogue = ctx->image + ctx->idx;
- emit_addr_mov_i64(A64_R(0), (const u64)im, ctx);
+ emit_a64_mov_i64(A64_R(0), (const u64)im, ctx);
emit_call((const u64)__bpf_tramp_exit, ctx);
}
--
2.34.1
From: Puranjay Mohan <puranjay(a)kernel.org>
[ Upstream commit 19d3c179a37730caf600a97fed3794feac2b197b ]
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Puranjay Mohan <puranjay(a)kernel.org>
Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net>
Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15M…
Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
arch/arm64/net/bpf_jit_comp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 5074bd1d37b5..7c5156e7d31e 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1952,7 +1952,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
emit(A64_STR64I(A64_R(20), A64_SP, regs_off + 8), ctx);
if (flags & BPF_TRAMP_F_CALL_ORIG) {
- emit_addr_mov_i64(A64_R(0), (const u64)im, ctx);
+ emit_a64_mov_i64(A64_R(0), (const u64)im, ctx);
emit_call((const u64)__bpf_tramp_enter, ctx);
}
@@ -1996,7 +1996,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
if (flags & BPF_TRAMP_F_CALL_ORIG) {
im->ip_epilogue = ctx->image + ctx->idx;
- emit_addr_mov_i64(A64_R(0), (const u64)im, ctx);
+ emit_a64_mov_i64(A64_R(0), (const u64)im, ctx);
emit_call((const u64)__bpf_tramp_exit, ctx);
}
--
2.34.1
From: Zi Yan <ziy(a)nvidia.com>
nr_failed was missing the large folio splits from migrate_pages_batch()
and can cause a mismatch between migrate_pages() return value and the
number of not migrated pages, i.e., when the return value of
migrate_pages() is 0, there are still pages left in the from page list.
It will happen when a non-PMD THP large folio fails to migrate due to
-ENOMEM and is split successfully but not all the split pages are not
migrated, migrate_pages_batch() would return non-zero, but
astats.nr_thp_split = 0. nr_failed would be 0 and returned to the caller
of migrate_pages(), but the not migrated pages are left in the from page
list without being added back to LRU lists.
Fix it by adding a new nr_split counter for large folio splits and adding
it to nr_failed in migrate_page_sync() after migrate_pages_batch() is
done.
Link: https://lkml.kernel.org/r/20231017163129.2025214-1-zi.yan@sent.com
Fixes: 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly")
Signed-off-by: Zi Yan <ziy(a)nvidia.com>
Acked-by: Huang Ying <ying.huang(a)intel.com>
Reviewed-by: Baolin Wang <baolin.wang(a)linux.alibaba.com>
Cc: David Hildenbrand <david(a)redhat.com>
Cc: Matthew Wilcox <willy(a)infradead.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn>
---
This patch has a Fixes tag and should be backported to 6.6, I don't know
why hasn't bakported.
mm/migrate.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 1004b1def1c2..4ed470885217 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1504,6 +1504,7 @@ struct migrate_pages_stats {
int nr_thp_succeeded; /* THP migrated successfully */
int nr_thp_failed; /* THP failed to be migrated */
int nr_thp_split; /* THP split before migrating */
+ int nr_split; /* Large folio (include THP) split before migrating */
};
/*
@@ -1623,6 +1624,7 @@ static int migrate_pages_batch(struct list_head *from,
int nr_retry_pages = 0;
int pass = 0;
bool is_thp = false;
+ bool is_large = false;
struct folio *folio, *folio2, *dst = NULL, *dst2;
int rc, rc_saved = 0, nr_pages;
LIST_HEAD(unmap_folios);
@@ -1638,7 +1640,8 @@ static int migrate_pages_batch(struct list_head *from,
nr_retry_pages = 0;
list_for_each_entry_safe(folio, folio2, from, lru) {
- is_thp = folio_test_large(folio) && folio_test_pmd_mappable(folio);
+ is_large = folio_test_large(folio);
+ is_thp = is_large && folio_test_pmd_mappable(folio);
nr_pages = folio_nr_pages(folio);
cond_resched();
@@ -1658,6 +1661,7 @@ static int migrate_pages_batch(struct list_head *from,
stats->nr_thp_failed++;
if (!try_split_folio(folio, split_folios)) {
stats->nr_thp_split++;
+ stats->nr_split++;
continue;
}
stats->nr_failed_pages += nr_pages;
@@ -1686,11 +1690,12 @@ static int migrate_pages_batch(struct list_head *from,
nr_failed++;
stats->nr_thp_failed += is_thp;
/* Large folio NUMA faulting doesn't split to retry. */
- if (folio_test_large(folio) && !nosplit) {
+ if (is_large && !nosplit) {
int ret = try_split_folio(folio, split_folios);
if (!ret) {
stats->nr_thp_split += is_thp;
+ stats->nr_split += is_large;
break;
} else if (reason == MR_LONGTERM_PIN &&
ret == -EAGAIN) {
@@ -1836,6 +1841,7 @@ static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
stats->nr_succeeded += astats.nr_succeeded;
stats->nr_thp_succeeded += astats.nr_thp_succeeded;
stats->nr_thp_split += astats.nr_thp_split;
+ stats->nr_split += astats.nr_split;
if (rc < 0) {
stats->nr_failed_pages += astats.nr_failed_pages;
stats->nr_thp_failed += astats.nr_thp_failed;
@@ -1843,7 +1849,11 @@ static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
return rc;
}
stats->nr_thp_failed += astats.nr_thp_split;
- nr_failed += astats.nr_thp_split;
+ /*
+ * Do not count rc, as pages will be retried below.
+ * Count nr_split only, since it includes nr_thp_split.
+ */
+ nr_failed += astats.nr_split;
/*
* Fall back to migrate all failed folios one by one synchronously. All
* failed folios except split THPs will be retried, so their failure
--
2.47.1
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x ab00ddd802f80e31fc9639c652d736fe3913feae
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051244-backwater-computer-184f@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ab00ddd802f80e31fc9639c652d736fe3913feae Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang(a)linux.alibaba.com>
Date: Wed, 23 Apr 2025 18:36:45 +0800
Subject: [PATCH] selftests/mm: compaction_test: support platform with huge
mount of memory
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang(a)linux.alibaba.com>
Acked-by: Dev Jain <dev.jain(a)arm.com>
Reviewed-by: Baolin Wang <baolin.wang(a)linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang(a)inux.alibaba.com>
Cc: Shuah Khan <shuah(a)kernel.org>
Cc: Sri Jayaramappa <sjayaram(a)akamai.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
diff --git a/tools/testing/selftests/mm/compaction_test.c b/tools/testing/selftests/mm/compaction_test.c
index 2c3a0eb6b22d..9bc4591c7b16 100644
--- a/tools/testing/selftests/mm/compaction_test.c
+++ b/tools/testing/selftests/mm/compaction_test.c
@@ -90,6 +90,8 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
int compaction_index = 0;
char nr_hugepages[20] = {0};
char init_nr_hugepages[24] = {0};
+ char target_nr_hugepages[24] = {0};
+ int slen;
snprintf(init_nr_hugepages, sizeof(init_nr_hugepages),
"%lu", initial_nr_hugepages);
@@ -106,11 +108,18 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
goto out;
}
- /* Request a large number of huge pages. The Kernel will allocate
- as much as it can */
- if (write(fd, "100000", (6*sizeof(char))) != (6*sizeof(char))) {
- ksft_print_msg("Failed to write 100000 to /proc/sys/vm/nr_hugepages: %s\n",
- strerror(errno));
+ /*
+ * Request huge pages for about half of the free memory. The Kernel
+ * will allocate as much as it can, and we expect it will get at least 1/3
+ */
+ nr_hugepages_ul = mem_free / hugepage_size / 2;
+ snprintf(target_nr_hugepages, sizeof(target_nr_hugepages),
+ "%lu", nr_hugepages_ul);
+
+ slen = strlen(target_nr_hugepages);
+ if (write(fd, target_nr_hugepages, slen) != slen) {
+ ksft_print_msg("Failed to write %lu to /proc/sys/vm/nr_hugepages: %s\n",
+ nr_hugepages_ul, strerror(errno));
goto close_fd;
}
commit e67e0eb6a98b261caf45048f9eb95fd7609289c0 upstream.
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
Cc: stable(a)vger.kernel.org
Tested-by: Haiyong Sun <sunhaiyong(a)loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn>
---
V2: Add upstream commit id.
arch/loongarch/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index a74bbcb05ee1..f2966745b058 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -55,7 +55,7 @@ endif
ifdef CONFIG_64BIT
ld-emul = $(64bit-emul)
-cflags-y += -mabi=lp64s
+cflags-y += -mabi=lp64s -mcmodel=normal
endif
cflags-y += -pipe -msoft-float
--
2.47.1
From: Zi Yan <ziy(a)nvidia.com>
commit a259945efe6ada94087ef666e9b38f8e34ea34ba upstream.
nr_failed was missing the large folio splits from migrate_pages_batch()
and can cause a mismatch between migrate_pages() return value and the
number of not migrated pages, i.e., when the return value of
migrate_pages() is 0, there are still pages left in the from page list.
It will happen when a non-PMD THP large folio fails to migrate due to
-ENOMEM and is split successfully but not all the split pages are not
migrated, migrate_pages_batch() would return non-zero, but
astats.nr_thp_split = 0. nr_failed would be 0 and returned to the caller
of migrate_pages(), but the not migrated pages are left in the from page
list without being added back to LRU lists.
Fix it by adding a new nr_split counter for large folio splits and adding
it to nr_failed in migrate_page_sync() after migrate_pages_batch() is
done.
Link: https://lkml.kernel.org/r/20231017163129.2025214-1-zi.yan@sent.com
Fixes: 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly")
Signed-off-by: Zi Yan <ziy(a)nvidia.com>
Acked-by: Huang Ying <ying.huang(a)intel.com>
Reviewed-by: Baolin Wang <baolin.wang(a)linux.alibaba.com>
Cc: David Hildenbrand <david(a)redhat.com>
Cc: Matthew Wilcox <willy(a)infradead.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn>
---
V2: Add upstream commit id.
mm/migrate.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 1004b1def1c2..4ed470885217 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1504,6 +1504,7 @@ struct migrate_pages_stats {
int nr_thp_succeeded; /* THP migrated successfully */
int nr_thp_failed; /* THP failed to be migrated */
int nr_thp_split; /* THP split before migrating */
+ int nr_split; /* Large folio (include THP) split before migrating */
};
/*
@@ -1623,6 +1624,7 @@ static int migrate_pages_batch(struct list_head *from,
int nr_retry_pages = 0;
int pass = 0;
bool is_thp = false;
+ bool is_large = false;
struct folio *folio, *folio2, *dst = NULL, *dst2;
int rc, rc_saved = 0, nr_pages;
LIST_HEAD(unmap_folios);
@@ -1638,7 +1640,8 @@ static int migrate_pages_batch(struct list_head *from,
nr_retry_pages = 0;
list_for_each_entry_safe(folio, folio2, from, lru) {
- is_thp = folio_test_large(folio) && folio_test_pmd_mappable(folio);
+ is_large = folio_test_large(folio);
+ is_thp = is_large && folio_test_pmd_mappable(folio);
nr_pages = folio_nr_pages(folio);
cond_resched();
@@ -1658,6 +1661,7 @@ static int migrate_pages_batch(struct list_head *from,
stats->nr_thp_failed++;
if (!try_split_folio(folio, split_folios)) {
stats->nr_thp_split++;
+ stats->nr_split++;
continue;
}
stats->nr_failed_pages += nr_pages;
@@ -1686,11 +1690,12 @@ static int migrate_pages_batch(struct list_head *from,
nr_failed++;
stats->nr_thp_failed += is_thp;
/* Large folio NUMA faulting doesn't split to retry. */
- if (folio_test_large(folio) && !nosplit) {
+ if (is_large && !nosplit) {
int ret = try_split_folio(folio, split_folios);
if (!ret) {
stats->nr_thp_split += is_thp;
+ stats->nr_split += is_large;
break;
} else if (reason == MR_LONGTERM_PIN &&
ret == -EAGAIN) {
@@ -1836,6 +1841,7 @@ static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
stats->nr_succeeded += astats.nr_succeeded;
stats->nr_thp_succeeded += astats.nr_thp_succeeded;
stats->nr_thp_split += astats.nr_thp_split;
+ stats->nr_split += astats.nr_split;
if (rc < 0) {
stats->nr_failed_pages += astats.nr_failed_pages;
stats->nr_thp_failed += astats.nr_thp_failed;
@@ -1843,7 +1849,11 @@ static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
return rc;
}
stats->nr_thp_failed += astats.nr_thp_split;
- nr_failed += astats.nr_thp_split;
+ /*
+ * Do not count rc, as pages will be retried below.
+ * Count nr_split only, since it includes nr_thp_split.
+ */
+ nr_failed += astats.nr_split;
/*
* Fall back to migrate all failed folios one by one synchronously. All
* failed folios except split THPs will be retried, so their failure
--
2.47.1
From: Baokun Li <libaokun1(a)huawei.com>
[ Upstream commit b4b4fda34e535756f9e774fb2d09c4537b7dfd1c ]
In the following concurrency we will access the uninitialized rs->lock:
ext4_fill_super
ext4_register_sysfs
// sysfs registered msg_ratelimit_interval_ms
// Other processes modify rs->interval to
// non-zero via msg_ratelimit_interval_ms
ext4_orphan_cleanup
ext4_msg(sb, KERN_INFO, "Errors on filesystem, "
__ext4_msg
___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state)
if (!rs->interval) // do nothing if interval is 0
return 1;
raw_spin_trylock_irqsave(&rs->lock, flags)
raw_spin_trylock(lock)
_raw_spin_trylock
__raw_spin_trylock
spin_acquire(&lock->dep_map, 0, 1, _RET_IP_)
lock_acquire
__lock_acquire
register_lock_class
assign_lock_key
dump_stack();
ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);
raw_spin_lock_init(&rs->lock);
// init rs->lock here
and get the following dump_stack:
=========================================================
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504
[...]
Call Trace:
dump_stack_lvl+0xc5/0x170
dump_stack+0x18/0x30
register_lock_class+0x740/0x7c0
__lock_acquire+0x69/0x13a0
lock_acquire+0x120/0x450
_raw_spin_trylock+0x98/0xd0
___ratelimit+0xf6/0x220
__ext4_msg+0x7f/0x160 [ext4]
ext4_orphan_cleanup+0x665/0x740 [ext4]
__ext4_fill_super+0x21ea/0x2b10 [ext4]
ext4_fill_super+0x14d/0x360 [ext4]
[...]
=========================================================
Normally interval is 0 until s_msg_ratelimit_state is initialized, so
___ratelimit() does nothing. But registering sysfs precedes initializing
rs->lock, so it is possible to change rs->interval to a non-zero value
via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is
uninitialized, and then a call to ext4_msg triggers the problem by
accessing an uninitialized rs->lock. Therefore register sysfs after all
initializations are complete to avoid such problems.
Signed-off-by: Baokun Li <libaokun1(a)huawei.com>
Reviewed-by: Jan Kara <jack(a)suse.cz>
Link: https://lore.kernel.org/r/20240102133730.1098120-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso(a)mit.edu>
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
fs/ext4/super.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 7f0231b34905..8528f61854ab 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5496,19 +5496,15 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
if (err)
goto failed_mount6;
- err = ext4_register_sysfs(sb);
- if (err)
- goto failed_mount7;
-
err = ext4_init_orphan_info(sb);
if (err)
- goto failed_mount8;
+ goto failed_mount7;
#ifdef CONFIG_QUOTA
/* Enable quota usage during mount. */
if (ext4_has_feature_quota(sb) && !sb_rdonly(sb)) {
err = ext4_enable_quotas(sb);
if (err)
- goto failed_mount9;
+ goto failed_mount8;
}
#endif /* CONFIG_QUOTA */
@@ -5534,7 +5530,7 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
ext4_msg(sb, KERN_INFO, "recovery complete");
err = ext4_mark_recovery_complete(sb, es);
if (err)
- goto failed_mount10;
+ goto failed_mount9;
}
if (test_opt(sb, DISCARD) && !bdev_max_discard_sectors(sb->s_bdev))
@@ -5551,15 +5547,17 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
atomic_set(&sbi->s_warning_count, 0);
atomic_set(&sbi->s_msg_count, 0);
+ /* Register sysfs after all initializations are complete. */
+ err = ext4_register_sysfs(sb);
+ if (err)
+ goto failed_mount9;
+
return 0;
-failed_mount10:
+failed_mount9:
ext4_quota_off_umount(sb);
-failed_mount9: __maybe_unused
+failed_mount8: __maybe_unused
ext4_release_orphan_info(sb);
-failed_mount8:
- ext4_unregister_sysfs(sb);
- kobject_put(&sbi->s_kobj);
failed_mount7:
ext4_unregister_li_request(sb);
failed_mount6:
--
2.34.1
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 94cff94634e506a4a44684bee1875d2dbf782722
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051258-washbowl-alongside-de3d@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 94cff94634e506a4a44684bee1875d2dbf782722 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Date: Fri, 4 Apr 2025 15:31:16 +0200
Subject: [PATCH] clocksource/i8253: Use raw_spinlock_irqsave() in
clockevent_i8253_disable()
On x86 during boot, clockevent_i8253_disable() can be invoked via
x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens
with enabled interrupts.
If some of the old i8253 hardware is actually used then lockdep will notice
that i8253_lock is used in hard interrupt context. This causes lockdep to
complain because it observed the lock being acquired with interrupts
enabled and in hard interrupt context.
Make clockevent_i8253_disable() acquire the lock with
raw_spinlock_irqsave() to cure this.
[ tglx: Massage change log and use guard() ]
Fixes: c8c4076723dac ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Cc: stable(a)vger.kernel.org
Link: https://lore.kernel.org/all/20250404133116.p-XRWJXf@linutronix.de
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 39f7c2d736d1..b603c25f3dfa 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -103,7 +103,7 @@ int __init clocksource_i8253_init(void)
#ifdef CONFIG_CLKEVT_I8253
void clockevent_i8253_disable(void)
{
- raw_spin_lock(&i8253_lock);
+ guard(raw_spinlock_irqsave)(&i8253_lock);
/*
* Writing the MODE register should stop the counter, according to
@@ -132,8 +132,6 @@ void clockevent_i8253_disable(void)
outb_p(0, PIT_CH0);
outb_p(0x30, PIT_MODE);
-
- raw_spin_unlock(&i8253_lock);
}
static int pit_shutdown(struct clock_event_device *evt)
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x ab00ddd802f80e31fc9639c652d736fe3913feae
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051245-jailbreak-unlinked-27ec@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ab00ddd802f80e31fc9639c652d736fe3913feae Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang(a)linux.alibaba.com>
Date: Wed, 23 Apr 2025 18:36:45 +0800
Subject: [PATCH] selftests/mm: compaction_test: support platform with huge
mount of memory
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang(a)linux.alibaba.com>
Acked-by: Dev Jain <dev.jain(a)arm.com>
Reviewed-by: Baolin Wang <baolin.wang(a)linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang(a)inux.alibaba.com>
Cc: Shuah Khan <shuah(a)kernel.org>
Cc: Sri Jayaramappa <sjayaram(a)akamai.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
diff --git a/tools/testing/selftests/mm/compaction_test.c b/tools/testing/selftests/mm/compaction_test.c
index 2c3a0eb6b22d..9bc4591c7b16 100644
--- a/tools/testing/selftests/mm/compaction_test.c
+++ b/tools/testing/selftests/mm/compaction_test.c
@@ -90,6 +90,8 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
int compaction_index = 0;
char nr_hugepages[20] = {0};
char init_nr_hugepages[24] = {0};
+ char target_nr_hugepages[24] = {0};
+ int slen;
snprintf(init_nr_hugepages, sizeof(init_nr_hugepages),
"%lu", initial_nr_hugepages);
@@ -106,11 +108,18 @@ int check_compaction(unsigned long mem_free, unsigned long hugepage_size,
goto out;
}
- /* Request a large number of huge pages. The Kernel will allocate
- as much as it can */
- if (write(fd, "100000", (6*sizeof(char))) != (6*sizeof(char))) {
- ksft_print_msg("Failed to write 100000 to /proc/sys/vm/nr_hugepages: %s\n",
- strerror(errno));
+ /*
+ * Request huge pages for about half of the free memory. The Kernel
+ * will allocate as much as it can, and we expect it will get at least 1/3
+ */
+ nr_hugepages_ul = mem_free / hugepage_size / 2;
+ snprintf(target_nr_hugepages, sizeof(target_nr_hugepages),
+ "%lu", nr_hugepages_ul);
+
+ slen = strlen(target_nr_hugepages);
+ if (write(fd, target_nr_hugepages, slen) != slen) {
+ ksft_print_msg("Failed to write %lu to /proc/sys/vm/nr_hugepages: %s\n",
+ nr_hugepages_ul, strerror(errno));
goto close_fd;
}
V2: not to add extra read-back in vcn_v4_0_5_start as there is a
read-back already. New comment for better understanding.
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. The read-back
of regVCN_RB1_DB_CTRL register after written is to ensure the
doorbell_index is updated before it can work properly.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Cc: stable(a)vger.kernel.org
Signed-off-by: David (Ming Qiang) Wu <David.Wu3(a)amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello(a)amd.com>
Tested-by: Mario Limonciello <mario.limonciello(a)amd.com>
---
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
index ed00d35039c13..e55b76d71367d 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
@@ -1034,6 +1034,10 @@ static int vcn_v4_0_5_start_dpg_mode(struct amdgpu_vcn_inst *vinst,
ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
VCN_RB1_DB_CTRL__EN_MASK);
+ /* Keeping one read-back to ensure all register writes are done, otherwise
+ * it may introduce race conditions */
+ RREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL);
+
return 0;
}
--
2.34.1
From: Ashish Kalra <ashish.kalra(a)amd.com>
When the shared pages are being made private during kdump preparation
there are additional checks to handle shared GHCB pages.
These additional checks include handling the case of GHCB page being
contained within a huge page.
The check for handling the case of GHCB contained within a huge
page incorrectly skips a page just below the GHCB page from being
transitioned back to private during kdump preparation.
This skipped page causes a 0x404 #VC exception when it is accessed
later while dumping guest memory during vmcore generation via kdump.
Correct the range to be checked for GHCB contained in a huge page.
Also ensure that the skipped huge page containing the GHCB page is
transitioned back to private by applying the correct address mask
later when changing GHCBs to private at end of kdump preparation.
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Cc: stable(a)vger.kernel.org
Signed-off-by: Ashish Kalra <ashish.kalra(a)amd.com>
---
arch/x86/coco/sev/core.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/x86/coco/sev/core.c b/arch/x86/coco/sev/core.c
index d35fec7b164a..30b74e4e4e88 100644
--- a/arch/x86/coco/sev/core.c
+++ b/arch/x86/coco/sev/core.c
@@ -1019,7 +1019,8 @@ static void unshare_all_memory(void)
data = per_cpu(runtime_data, cpu);
ghcb = (unsigned long)&data->ghcb_page;
- if (addr <= ghcb && ghcb <= addr + size) {
+ /* Handle the case of a huge page containing the GHCB page */
+ if (addr <= ghcb && ghcb < addr + size) {
skipped_addr = true;
break;
}
@@ -1131,8 +1132,8 @@ static void shutdown_all_aps(void)
void snp_kexec_finish(void)
{
struct sev_es_runtime_data *data;
+ unsigned long size, addr;
unsigned int level, cpu;
- unsigned long size;
struct ghcb *ghcb;
pte_t *pte;
@@ -1160,8 +1161,10 @@ void snp_kexec_finish(void)
ghcb = &data->ghcb_page;
pte = lookup_address((unsigned long)ghcb, &level);
size = page_level_size(level);
- set_pte_enc(pte, level, (void *)ghcb);
- snp_set_memory_private((unsigned long)ghcb, (size / PAGE_SIZE));
+ /* Handle the case of a huge page containing the GHCB page */
+ addr = (unsigned long)ghcb & page_level_mask(level);
+ set_pte_enc(pte, level, (void *)addr);
+ snp_set_memory_private(addr, (size / PAGE_SIZE));
}
}
--
2.34.1
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. The read-back
of regVCN_RB1_DB_CTRL register after written is to ensure the
doorbell_index is updated before it can work properly.
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Signed-off-by: David (Ming Qiang) Wu <David.Wu3(a)amd.com>
---
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
index ed00d35039c1..d6be8b05d7a2 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
@@ -1033,6 +1033,8 @@ static int vcn_v4_0_5_start_dpg_mode(struct amdgpu_vcn_inst *vinst,
WREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL,
ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
VCN_RB1_DB_CTRL__EN_MASK);
+ /* Read DB_CTRL to flush the write DB_CTRL command. */
+ RREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL);
return 0;
}
@@ -1195,6 +1197,8 @@ static int vcn_v4_0_5_start(struct amdgpu_vcn_inst *vinst)
WREG32_SOC15(VCN, i, regVCN_RB1_DB_CTRL,
ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
VCN_RB1_DB_CTRL__EN_MASK);
+ /* Read DB_CTRL to flush the write DB_CTRL command. */
+ RREG32_SOC15(VCN, i, regVCN_RB1_DB_CTRL);
WREG32_SOC15(VCN, i, regUVD_RB_BASE_LO, ring->gpu_addr);
WREG32_SOC15(VCN, i, regUVD_RB_BASE_HI, upper_32_bits(ring->gpu_addr));
--
2.49.0
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report")
Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.loc…
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable(a)vger.kernel.org
Signed-off-by: Rong Zhang <i(a)rong.moe>
---
drivers/hid/bpf/hid_bpf_dispatch.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/hid/bpf/hid_bpf_dispatch.c b/drivers/hid/bpf/hid_bpf_dispatch.c
index 2e96ec6a3073..9a06f9b0e4ef 100644
--- a/drivers/hid/bpf/hid_bpf_dispatch.c
+++ b/drivers/hid/bpf/hid_bpf_dispatch.c
@@ -38,6 +38,9 @@ dispatch_hid_bpf_device_event(struct hid_device *hdev, enum hid_report_type type
struct hid_bpf_ops *e;
int ret;
+ if (unlikely(hdev->bpf.destroyed))
+ return ERR_PTR(-ENODEV);
+
if (type >= HID_REPORT_TYPES)
return ERR_PTR(-EINVAL);
@@ -93,6 +96,9 @@ int dispatch_hid_bpf_raw_requests(struct hid_device *hdev,
struct hid_bpf_ops *e;
int ret, idx;
+ if (unlikely(hdev->bpf.destroyed))
+ return -ENODEV;
+
if (rtype >= HID_REPORT_TYPES)
return -EINVAL;
@@ -130,6 +136,9 @@ int dispatch_hid_bpf_output_report(struct hid_device *hdev,
struct hid_bpf_ops *e;
int ret, idx;
+ if (unlikely(hdev->bpf.destroyed))
+ return -ENODEV;
+
idx = srcu_read_lock(&hdev->bpf.srcu);
list_for_each_entry_srcu(e, &hdev->bpf.prog_list, list,
srcu_read_lock_held(&hdev->bpf.srcu)) {
base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3
--
2.49.0
There is a long standing bug which causes I2C communication not to
work on the Armada 3700 based boards. This small series restores
that functionality.
Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com>
Signed-off-by: Imre Kaloz <kaloz(a)openwrt.org>
---
Gabor Juhos (3):
i2c: add init_recovery() callback
i2c: pxa: prevent calling of the generic recovery init code
i2c: pxa: handle 'Early Bus Busy' condition on Armada 3700
drivers/i2c/busses/i2c-pxa.c | 25 +++++++++++++++++++------
drivers/i2c/i2c-core-base.c | 8 +++++++-
include/linux/i2c.h | 4 ++++
3 files changed, 30 insertions(+), 7 deletions(-)
---
base-commit: 92a09c47464d040866cf2b4cd052bc60555185fb
change-id: 20250510-i2c-pxa-fix-i2c-communication-3e6de1e3d0c6
Best regards,
--
Gabor Juhos <j4g8y7(a)gmail.com>
With an unset CONFIG_CPU_MITIGATIONS, or more precisely with
CONFIG_MITIGATION_ITS,
I get a compilation error:
ld: arch/x86/net/bpf_jit_comp.o: in function `emit_indirect_jump':
bpf_jit_comp.c:(.text+0x8cb): undefined reference to
`__x86_indirect_its_thunk_array'
make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make[1]: *** [/usr/src/linux/Makefile:1182: vmlinux] Error 2
make: *** [Makefile:224: __sub-make] Error 2
From: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com>
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable(a)vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini(a)toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas(a)glider.be>
---
v2 -> v3
- add r-b Andy, t-b Geert
- fixed commit message
v1 -> v2
- Instead of calling PM ops with disabled interrupts, just disable the
irq while going in suspend and re-enable it after restoring the
context in resume function.
---
drivers/gpio/gpio-pca953x.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index ab2c0fd428fb..b852e4997629 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -1226,6 +1226,8 @@ static int pca953x_restore_context(struct pca953x_chip *chip)
guard(mutex)(&chip->i2c_lock);
+ if (chip->client->irq > 0)
+ enable_irq(chip->client->irq);
regcache_cache_only(chip->regmap, false);
regcache_mark_dirty(chip->regmap);
ret = pca953x_regcache_sync(chip);
@@ -1238,6 +1240,10 @@ static int pca953x_restore_context(struct pca953x_chip *chip)
static void pca953x_save_context(struct pca953x_chip *chip)
{
guard(mutex)(&chip->i2c_lock);
+
+ /* Disable IRQ to prevent early triggering while regmap "cache only" is on */
+ if (chip->client->irq > 0)
+ disable_irq(chip->client->irq);
regcache_cache_only(chip->regmap, true);
}
--
2.39.5
A user reported on the Arch Linux Forums that their device is emitting
the following message in the kernel journal, which is fixed by adding
the quirk as submitted in this patch:
> kernel: usb 1-2: current rate 8436480 is different from the runtime rate 48000
There also is an entry for this product line added long time ago.
Their specific device has the following ID:
$ lsusb | grep Audio
Bus 001 Device 002: ID 1101:0003 EasyPass Industrial Co., Ltd Audioengine D1
Link: https://bbs.archlinux.org/viewtopic.php?id=305494
Fixes: 93f9d1a4ac593 ("ALSA: usb-audio: Apply sample rate quirk for Audioengine D1")
Cc: stable(a)vger.kernel.org
Signed-off-by: Christian Heusel <christian(a)heusel.eu>
---
sound/usb/quirks.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 9112313a9dbc005d8ab6076a6f2f4b0c0cecc64f..eb192834db68ca599770055cb563201e648f20ba 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -2250,6 +2250,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_FIXED_RATE),
DEVICE_FLG(0x0fd9, 0x0008, /* Hauppauge HVR-950Q */
QUIRK_FLAG_SHARE_MEDIA_DEVICE | QUIRK_FLAG_ALIGN_TRANSFER),
+ DEVICE_FLG(0x1101, 0x0003, /* Audioengine D1 */
+ QUIRK_FLAG_GET_SAMPLE_RATE),
DEVICE_FLG(0x1224, 0x2a25, /* Jieli Technology USB PHY 2.0 */
QUIRK_FLAG_GET_SAMPLE_RATE | QUIRK_FLAG_MIC_RES_16),
DEVICE_FLG(0x1395, 0x740a, /* Sennheiser DECT */
---
base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3
change-id: 20250512-audioengine-quirk-addition-718e6c86a2cc
Best regards,
--
Christian Heusel <christian(a)heusel.eu>
This patch series addresses a regression in Energy Efficient Ethernet
(EEE) handling for KSZ switches with integrated PHYs, introduced in
kernel v6.9 by commit fe0d4fd9285e ("net: phy: Keep track of EEE
configuration").
The first patch updates the DSA driver to allow phylink to properly
manage PHY EEE configuration. Since integrated PHYs handle LPI
internally and ports without integrated PHYs do not document MAC-level
LPI support, dummy MAC LPI callbacks are provided.
The second patch removes outdated EEE workarounds from the micrel PHY
driver, as they are no longer needed with correct phylink handling.
This series addresses the regression for mainline and kernels starting
from v6.14. It is not easily possible to fully fix older kernels due
to missing infrastructure changes.
Tested on KSZ9893 hardware.
Oleksij Rempel (2):
net: dsa: microchip: let phylink manage PHY EEE configuration on KSZ
switches
net: phy: micrel: remove KSZ9477 EEE quirks now handled by phylink
drivers/net/dsa/microchip/ksz_common.c | 135 ++++++++++++++++++++-----
drivers/net/phy/micrel.c | 7 --
include/linux/micrel_phy.h | 1 -
3 files changed, 107 insertions(+), 36 deletions(-)
--
2.39.5
While the set_msix() callback function in pcie-cadence-ep writes the
Table Size field correctly (N-1), the calculation of the PBA offset
is wrong because it calculates space for (N-1) entries instead of N.
This results in e.g. the following error when using QEMU with PCI
passthrough on a device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
Cc: stable(a)vger.kernel.org
Fixes: 3ef5d16f50f8 ("PCI: cadence: Add MSI-X support to Endpoint driver")
Reviewed-by: Wilfred Mallawa <wilfred.mallawa(a)wdc.com>
Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org>
Signed-off-by: Niklas Cassel <cassel(a)kernel.org>
---
drivers/pci/controller/cadence/pcie-cadence-ep.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index 599ec4b1223e..112ae200b393 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -292,13 +292,14 @@ static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u8 vfn,
struct cdns_pcie *pcie = &ep->pcie;
u32 cap = CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET;
u32 val, reg;
+ u16 actual_interrupts = interrupts + 1;
fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
reg = cap + PCI_MSIX_FLAGS;
val = cdns_pcie_ep_fn_readw(pcie, fn, reg);
val &= ~PCI_MSIX_FLAGS_QSIZE;
- val |= interrupts;
+ val |= interrupts; /* 0's based value */
cdns_pcie_ep_fn_writew(pcie, fn, reg, val);
/* Set MSI-X BAR and offset */
@@ -308,7 +309,7 @@ static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u8 vfn,
/* Set PBA BAR and offset. BAR must match MSI-X BAR */
reg = cap + PCI_MSIX_PBA;
- val = (offset + (interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
+ val = (offset + (actual_interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
cdns_pcie_ep_fn_writel(pcie, fn, reg, val);
return 0;
--
2.49.0
While the set_msix() callback function in pcie-designware-ep writes the
Table Size field correctly (N-1), the calculation of the PBA offset
is wrong because it calculates space for (N-1) entries instead of N.
This results in e.g. the following error when using QEMU with PCI
passthrough on a device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
Cc: stable(a)vger.kernel.org
Fixes: 83153d9f36e2 ("PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments")
Reviewed-by: Wilfred Mallawa <wilfred.mallawa(a)wdc.com>
Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org>
Signed-off-by: Niklas Cassel <cassel(a)kernel.org>
---
drivers/pci/controller/dwc/pcie-designware-ep.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 1a0bf9341542..24026f3f3413 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -585,6 +585,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct dw_pcie_ep_func *ep_func;
u32 val, reg;
+ u16 actual_interrupts = interrupts + 1;
ep_func = dw_pcie_ep_get_func_from_ep(ep, func_no);
if (!ep_func || !ep_func->msix_cap)
@@ -595,7 +596,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
reg = ep_func->msix_cap + PCI_MSIX_FLAGS;
val = dw_pcie_ep_readw_dbi(ep, func_no, reg);
val &= ~PCI_MSIX_FLAGS_QSIZE;
- val |= interrupts;
+ val |= interrupts; /* 0's based value */
dw_pcie_writew_dbi(pci, reg, val);
reg = ep_func->msix_cap + PCI_MSIX_TABLE;
@@ -603,7 +604,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
dw_pcie_ep_writel_dbi(ep, func_no, reg, val);
reg = ep_func->msix_cap + PCI_MSIX_PBA;
- val = (offset + (interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
+ val = (offset + (actual_interrupts * PCI_MSIX_ENTRY_SIZE)) | bir;
dw_pcie_ep_writel_dbi(ep, func_no, reg, val);
dw_pcie_dbi_ro_wr_dis(pci);
--
2.49.0
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 94cff94634e506a4a44684bee1875d2dbf782722
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051256-encrust-scribe-9996@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 94cff94634e506a4a44684bee1875d2dbf782722 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Date: Fri, 4 Apr 2025 15:31:16 +0200
Subject: [PATCH] clocksource/i8253: Use raw_spinlock_irqsave() in
clockevent_i8253_disable()
On x86 during boot, clockevent_i8253_disable() can be invoked via
x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens
with enabled interrupts.
If some of the old i8253 hardware is actually used then lockdep will notice
that i8253_lock is used in hard interrupt context. This causes lockdep to
complain because it observed the lock being acquired with interrupts
enabled and in hard interrupt context.
Make clockevent_i8253_disable() acquire the lock with
raw_spinlock_irqsave() to cure this.
[ tglx: Massage change log and use guard() ]
Fixes: c8c4076723dac ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de>
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Cc: stable(a)vger.kernel.org
Link: https://lore.kernel.org/all/20250404133116.p-XRWJXf@linutronix.de
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 39f7c2d736d1..b603c25f3dfa 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -103,7 +103,7 @@ int __init clocksource_i8253_init(void)
#ifdef CONFIG_CLKEVT_I8253
void clockevent_i8253_disable(void)
{
- raw_spin_lock(&i8253_lock);
+ guard(raw_spinlock_irqsave)(&i8253_lock);
/*
* Writing the MODE register should stop the counter, according to
@@ -132,8 +132,6 @@ void clockevent_i8253_disable(void)
outb_p(0, PIT_CH0);
outb_p(0x30, PIT_MODE);
-
- raw_spin_unlock(&i8253_lock);
}
static int pit_shutdown(struct clock_event_device *evt)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 6beb6835c1fbb3f676aebb51a5fee6b77fed9308
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025050913-rubble-confirm-99ee@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6beb6835c1fbb3f676aebb51a5fee6b77fed9308 Mon Sep 17 00:00:00 2001
From: Eelco Chaudron <echaudro(a)redhat.com>
Date: Tue, 6 May 2025 16:28:54 +0200
Subject: [PATCH] openvswitch: Fix unsafe attribute parsing in
output_userspace()
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed.
Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Signed-off-by: Eelco Chaudron <echaudro(a)redhat.com>
Acked-by: Ilya Maximets <i.maximets(a)ovn.org>
Acked-by: Aaron Conole <aconole(a)redhat.com>
Link: https://patch.msgid.link/0bd65949df61591d9171c0dc13e42cea8941da10.174654173…
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index 61fea7baae5d..2f22ca59586f 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -975,8 +975,7 @@ static int output_userspace(struct datapath *dp, struct sk_buff *skb,
upcall.cmd = OVS_PACKET_CMD_ACTION;
upcall.mru = OVS_CB(skb)->mru;
- for (a = nla_data(attr), rem = nla_len(attr); rem > 0;
- a = nla_next(a, &rem)) {
+ nla_for_each_nested(a, attr, rem) {
switch (nla_type(a)) {
case OVS_USERSPACE_ATTR_USERDATA:
upcall.userdata = a;
From: Mario Limonciello <mario.limonciello(a)amd.com>
On VCN 4.0.5 using a doorbell to notify VCN hardware for WPTR changes
while dynamic power gating is enabled introduces a timing dependency
that can sometimes cause WPTR to not be properly updated. This manifests
as a job timeout which will trigger a VCN reset and cause the application
that submitted the job to crash.
Writing directly to the WPTR register instead of using the doorbell changes
the timing enough that the issue doesn't happen. Turn off doorbell use for
now while the issue continues to be debugged.
Cc: stable(a)vger.kernel.org
Cc: David.Wu3(a)amd.com
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3909
Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com>
---
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
index ba603b2246e2e..ea9513f65d7e4 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
@@ -181,7 +181,7 @@ static int vcn_v4_0_5_sw_init(struct amdgpu_ip_block *ip_block)
return r;
ring = &adev->vcn.inst[i].ring_enc[0];
- ring->use_doorbell = true;
+ ring->use_doorbell = false;
if (amdgpu_sriov_vf(adev))
ring->doorbell_index = (adev->doorbell_index.vcn.vcn_ring0_1 << 1) +
i * (adev->vcn.inst[i].num_enc_rings + 1) + 1;
--
2.43.0
The patch titled
Subject: taskstats: fix struct taskstats breaks backward compatibility since version 15
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
taskstats-fix-struct-taskstats-breaks-backward-compatibility-since-version-15.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche…
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Wang Yaxin <wang.yaxin(a)zte.com.cn>
Subject: taskstats: fix struct taskstats breaks backward compatibility since version 15
Date: Sat, 10 May 2025 15:54:13 +0800 (CST)
Problem
========
commit 658eb5ab916d ("delayacct: add delay max to record delay peak")
- adding more fields
commit f65c64f311ee ("delayacct: add delay min to record delay peak")
- adding more fields
commit b016d0873777 ("taskstats: modify taskstats version")
- version bump to 15
Since version 15 (TASKSTATS_VERSION=15) the new layout of the structure
adds fields in the middle of the structure, rendering all old software
incompatible with newer kernels and software compiled against the new
kernel headers incompatible with older kernels.
Solution
=========
move delay max and delay min to the end of taskstat, and bump
the version to 16 after the change
Link: https://lkml.kernel.org/r/20250510155413259V4JNRXxukdDgzsaL0Fo6a@zte.com.cn
Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak")
Signed-off-by: Wang Yaxin <wang.yaxin(a)zte.com.cn>
Signed-off-by: xu xin <xu.xin16(a)zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2(a)zte.com.cn>
Cc: Balbir Singh <bsingharora(a)gmail.com>
Cc: Yang Yang <yang.yang29(a)zte.com.cn>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
include/uapi/linux/taskstats.h | 43 +++++++++++++++++++------------
1 file changed, 27 insertions(+), 16 deletions(-)
--- a/include/uapi/linux/taskstats.h~taskstats-fix-struct-taskstats-breaks-backward-compatibility-since-version-15
+++ a/include/uapi/linux/taskstats.h
@@ -34,7 +34,7 @@
*/
-#define TASKSTATS_VERSION 15
+#define TASKSTATS_VERSION 16
#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN
* in linux/sched.h */
@@ -72,8 +72,6 @@ struct taskstats {
*/
__u64 cpu_count __attribute__((aligned(8)));
__u64 cpu_delay_total;
- __u64 cpu_delay_max;
- __u64 cpu_delay_min;
/* Following four fields atomically updated using task->delays->lock */
@@ -82,14 +80,10 @@ struct taskstats {
*/
__u64 blkio_count;
__u64 blkio_delay_total;
- __u64 blkio_delay_max;
- __u64 blkio_delay_min;
/* Delay waiting for page fault I/O (swap in only) */
__u64 swapin_count;
__u64 swapin_delay_total;
- __u64 swapin_delay_max;
- __u64 swapin_delay_min;
/* cpu "wall-clock" running time
* On some architectures, value will adjust for cpu time stolen
@@ -172,14 +166,11 @@ struct taskstats {
/* Delay waiting for memory reclaim */
__u64 freepages_count;
__u64 freepages_delay_total;
- __u64 freepages_delay_max;
- __u64 freepages_delay_min;
+
/* Delay waiting for thrashing page */
__u64 thrashing_count;
__u64 thrashing_delay_total;
- __u64 thrashing_delay_max;
- __u64 thrashing_delay_min;
/* v10: 64-bit btime to avoid overflow */
__u64 ac_btime64; /* 64-bit begin time */
@@ -187,8 +178,6 @@ struct taskstats {
/* v11: Delay waiting for memory compact */
__u64 compact_count;
__u64 compact_delay_total;
- __u64 compact_delay_max;
- __u64 compact_delay_min;
/* v12 begin */
__u32 ac_tgid; /* thread group ID */
@@ -210,15 +199,37 @@ struct taskstats {
/* v13: Delay waiting for write-protect copy */
__u64 wpcopy_count;
__u64 wpcopy_delay_total;
- __u64 wpcopy_delay_max;
- __u64 wpcopy_delay_min;
/* v14: Delay waiting for IRQ/SOFTIRQ */
__u64 irq_count;
__u64 irq_delay_total;
+
+ /* v15: add Delay max and Delay min */
+
+ /* v16: move Delay max and Delay min to the end of taskstat */
+ __u64 cpu_delay_max;
+ __u64 cpu_delay_min;
+
+ __u64 blkio_delay_max;
+ __u64 blkio_delay_min;
+
+ __u64 swapin_delay_max;
+ __u64 swapin_delay_min;
+
+ __u64 freepages_delay_max;
+ __u64 freepages_delay_min;
+
+ __u64 thrashing_delay_max;
+ __u64 thrashing_delay_min;
+
+ __u64 compact_delay_max;
+ __u64 compact_delay_min;
+
+ __u64 wpcopy_delay_max;
+ __u64 wpcopy_delay_min;
+
__u64 irq_delay_max;
__u64 irq_delay_min;
- /* v15: add Delay max */
};
_
Patches currently in -mm which might be from wang.yaxin(a)zte.com.cn are
taskstats-fix-struct-taskstats-breaks-backward-compatibility-since-version-15.patch
In defining VEND1_GLOBAL_LED_PROV_ACT_STRETCH there was a typo where the
GENMASK definition was swapped.
Fix it to prevent any kind of misconfiguration if ever this define will
be used in the future.
Cc: <stable(a)vger.kernel.org>
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com>
---
drivers/net/phy/aquantia/aquantia.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/aquantia/aquantia.h b/drivers/net/phy/aquantia/aquantia.h
index 0c78bfabace5..e2bb66a21589 100644
--- a/drivers/net/phy/aquantia/aquantia.h
+++ b/drivers/net/phy/aquantia/aquantia.h
@@ -76,7 +76,7 @@
#define VEND1_GLOBAL_LED_PROV_LINK100 BIT(5)
#define VEND1_GLOBAL_LED_PROV_RX_ACT BIT(3)
#define VEND1_GLOBAL_LED_PROV_TX_ACT BIT(2)
-#define VEND1_GLOBAL_LED_PROV_ACT_STRETCH GENMASK(0, 1)
+#define VEND1_GLOBAL_LED_PROV_ACT_STRETCH GENMASK(1, 0)
#define VEND1_GLOBAL_LED_PROV_LINK_MASK (VEND1_GLOBAL_LED_PROV_LINK100 | \
VEND1_GLOBAL_LED_PROV_LINK1000 | \
--
2.48.1
Hi All,
Chages since v6:
- do not unnecessary free pages across iterations
Chages since v5:
- full error message included into commit description
Chages since v4:
- unused pages leak is avoided
Chages since v3:
- pfn_to_virt() changed to page_to_virt() due to compile error
Chages since v2:
- page allocation moved out of the atomic context
Chages since v1:
- Fixes: and -stable tags added to the patch description
Thanks!
Alexander Gordeev (1):
kasan: Avoid sleepable page allocation from atomic context
mm/kasan/shadow.c | 76 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 62 insertions(+), 14 deletions(-)
--
2.45.2
On 5/12/25 05:34, gregkh(a)linuxfoundation.org wrote:
>
> This is a note to let you know that I've just added the patch titled
>
> memblock: Accept allocated memory before use in memblock_double_array()
>
> to the 6.6-stable tree which can be found at:
> http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
>
> The filename of the patch is:
> memblock-accept-allocated-memory-before-use-in-memblock_double_array.patch
> and it can be found in the queue-6.6 subdirectory.
>
> If you, or anyone else, feels it should not be added to the stable tree,
> please let <stable(a)vger.kernel.org> know about it.
The 6.6 version of the patch needs a fixup. As mentioned in the patch
description, any release before v6.12 needs to have the accept_memory()
call changed from:
accept_memory(addr, new_alloc_size);
to
accept_memory(addr, addr + new_alloc_size);
Do you need for me to send a v6.6 specific patch?
Thanks,
Tom
>
>
> From da8bf5daa5e55a6af2b285ecda460d6454712ff4 Mon Sep 17 00:00:00 2001
> From: Tom Lendacky <thomas.lendacky(a)amd.com>
> Date: Thu, 8 May 2025 12:24:10 -0500
> Subject: memblock: Accept allocated memory before use in memblock_double_array()
>
> From: Tom Lendacky <thomas.lendacky(a)amd.com>
>
> commit da8bf5daa5e55a6af2b285ecda460d6454712ff4 upstream.
>
> When increasing the array size in memblock_double_array() and the slab
> is not yet available, a call to memblock_find_in_range() is used to
> reserve/allocate memory. However, the range returned may not have been
> accepted, which can result in a crash when booting an SNP guest:
>
> RIP: 0010:memcpy_orig+0x68/0x130
> Code: ...
> RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006
> RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000
> RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00
> RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000
> R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78
> R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00
> memblock_double_array+0xff/0x310
> memblock_add_range+0x1fb/0x2f0
> memblock_reserve+0x4f/0xa0
> memblock_alloc_range_nid+0xac/0x130
> memblock_alloc_internal+0x53/0xc0
> memblock_alloc_try_nid+0x3d/0xa0
> swiotlb_init_remap+0x149/0x2f0
> mem_init+0xb/0xb0
> mm_core_init+0x8f/0x350
> start_kernel+0x17e/0x5d0
> x86_64_start_reservations+0x14/0x30
> x86_64_start_kernel+0x92/0xa0
> secondary_startup_64_no_verify+0x194/0x19b
>
> Mitigate this by calling accept_memory() on the memory range returned
> before the slab is available.
>
> Prior to v6.12, the accept_memory() interface used a 'start' and 'end'
> parameter instead of 'start' and 'size', therefore the accept_memory()
> call must be adjusted to specify 'start + size' for 'end' when applying
> to kernels prior to v6.12.
>
> Cc: stable(a)vger.kernel.org # see patch description, needs adjustments for <= 6.11
> Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory")
> Signed-off-by: Tom Lendacky <thomas.lendacky(a)amd.com>
> Link: https://lore.kernel.org/r/da1ac73bf4ded761e21b4e4bb5178382a580cd73.17467250…
> Signed-off-by: Mike Rapoport (Microsoft) <rppt(a)kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
> ---
> mm/memblock.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -460,7 +460,14 @@ static int __init_memblock memblock_doub
> min(new_area_start, memblock.current_limit),
> new_alloc_size, PAGE_SIZE);
>
> - new_array = addr ? __va(addr) : NULL;
> + if (addr) {
> + /* The memory may not have been accepted, yet. */
> + accept_memory(addr, new_alloc_size);
> +
> + new_array = __va(addr);
> + } else {
> + new_array = NULL;
> + }
> }
> if (!addr) {
> pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
>
>
> Patches currently in stable-queue which might be from thomas.lendacky(a)amd.com are
>
> queue-6.6/memblock-accept-allocated-memory-before-use-in-memblock_double_array.patch
From: Andrii Nakryiko <andrii(a)kernel.org>
commit 1a80dbcb2dbaf6e4c216e62e30fa7d3daa8001ce upstream.
BPF link for some program types is passed as a "context" which can be
used by those BPF programs to look up additional information. E.g., for
multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values.
Because of this runtime dependency, when bpf_link refcnt drops to zero
there could still be active BPF programs running accessing link data.
This patch adds generic support to defer bpf_link dealloc callback to
after RCU GP, if requested. This is done by exposing two different
deallocation callbacks, one synchronous and one deferred. If deferred
one is provided, bpf_link_free() will schedule dealloc_deferred()
callback to happen after RCU GP.
BPF is using two flavors of RCU: "classic" non-sleepable one and RCU
tasks trace one. The latter is used when sleepable BPF programs are
used. bpf_link_free() accommodates that by checking underlying BPF
program's sleepable flag, and goes either through normal RCU GP only for
non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP
(taking into account rcu_trace_implies_rcu_gp() optimization), if BPF
program is sleepable.
We use this for multi-kprobe and multi-uprobe links, which dereference
link during program run. We also preventively switch raw_tp link to use
deferred dealloc callback, as upcoming changes in bpf-next tree expose
raw_tp link data (specifically, cookie value) to BPF program at runtime
as well.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Reported-by: syzbot+981935d9485a560bfbcb(a)syzkaller.appspotmail.com
Reported-by: syzbot+2cb5a6c573e98db598cc(a)syzkaller.appspotmail.com
Reported-by: syzbot+62d8b26793e8a2bd0516(a)syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org>
Acked-by: Jiri Olsa <jolsa(a)kernel.org>
Link: https://lore.kernel.org/r/20240328052426.3042617-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast(a)kernel.org>
[fixed conflicts due to missing commits 89ae89f53d20
("bpf: Add multi uprobe link")]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
include/linux/bpf.h | 16 +++++++++++++++-
kernel/bpf/syscall.c | 35 ++++++++++++++++++++++++++++++++---
kernel/trace/bpf_trace.c | 2 +-
3 files changed, 48 insertions(+), 5 deletions(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index e9c1338851e3..1cf8c7037289 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1293,12 +1293,26 @@ struct bpf_link {
enum bpf_link_type type;
const struct bpf_link_ops *ops;
struct bpf_prog *prog;
- struct work_struct work;
+ /* rcu is used before freeing, work can be used to schedule that
+ * RCU-based freeing before that, so they never overlap
+ */
+ union {
+ struct rcu_head rcu;
+ struct work_struct work;
+ };
};
struct bpf_link_ops {
void (*release)(struct bpf_link *link);
+ /* deallocate link resources callback, called without RCU grace period
+ * waiting
+ */
void (*dealloc)(struct bpf_link *link);
+ /* deallocate link resources callback, called after RCU grace period;
+ * if underlying BPF program is sleepable we go through tasks trace
+ * RCU GP and then "classic" RCU GP
+ */
+ void (*dealloc_deferred)(struct bpf_link *link);
int (*detach)(struct bpf_link *link);
int (*update_prog)(struct bpf_link *link, struct bpf_prog *new_prog,
struct bpf_prog *old_prog);
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 27fdf1b2fc46..1cc9b28b065a 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -2750,17 +2750,46 @@ void bpf_link_inc(struct bpf_link *link)
atomic64_inc(&link->refcnt);
}
+static void bpf_link_defer_dealloc_rcu_gp(struct rcu_head *rcu)
+{
+ struct bpf_link *link = container_of(rcu, struct bpf_link, rcu);
+
+ /* free bpf_link and its containing memory */
+ link->ops->dealloc_deferred(link);
+}
+
+static void bpf_link_defer_dealloc_mult_rcu_gp(struct rcu_head *rcu)
+{
+ if (rcu_trace_implies_rcu_gp())
+ bpf_link_defer_dealloc_rcu_gp(rcu);
+ else
+ call_rcu(rcu, bpf_link_defer_dealloc_rcu_gp);
+}
+
/* bpf_link_free is guaranteed to be called from process context */
static void bpf_link_free(struct bpf_link *link)
{
+ bool sleepable = false;
+
bpf_link_free_id(link->id);
if (link->prog) {
+ sleepable = link->prog->aux->sleepable;
/* detach BPF program, clean up used resources */
link->ops->release(link);
bpf_prog_put(link->prog);
}
- /* free bpf_link and its containing memory */
- link->ops->dealloc(link);
+ if (link->ops->dealloc_deferred) {
+ /* schedule BPF link deallocation; if underlying BPF program
+ * is sleepable, we need to first wait for RCU tasks trace
+ * sync, then go through "classic" RCU grace period
+ */
+ if (sleepable)
+ call_rcu_tasks_trace(&link->rcu, bpf_link_defer_dealloc_mult_rcu_gp);
+ else
+ call_rcu(&link->rcu, bpf_link_defer_dealloc_rcu_gp);
+ }
+ if (link->ops->dealloc)
+ link->ops->dealloc(link);
}
static void bpf_link_put_deferred(struct work_struct *work)
@@ -3246,7 +3275,7 @@ static int bpf_raw_tp_link_fill_link_info(const struct bpf_link *link,
static const struct bpf_link_ops bpf_raw_tp_link_lops = {
.release = bpf_raw_tp_link_release,
- .dealloc = bpf_raw_tp_link_dealloc,
+ .dealloc_deferred = bpf_raw_tp_link_dealloc,
.show_fdinfo = bpf_raw_tp_link_show_fdinfo,
.fill_link_info = bpf_raw_tp_link_fill_link_info,
};
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 7254c808b27c..989b6843069e 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -2564,7 +2564,7 @@ static void bpf_kprobe_multi_link_dealloc(struct bpf_link *link)
static const struct bpf_link_ops bpf_kprobe_multi_link_lops = {
.release = bpf_kprobe_multi_link_release,
- .dealloc = bpf_kprobe_multi_link_dealloc,
+ .dealloc_deferred = bpf_kprobe_multi_link_dealloc,
};
static void bpf_kprobe_multi_cookie_swap(void *a, void *b, int size, const void *priv)
--
2.34.1
The patch below does not apply to the 6.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y
git checkout FETCH_HEAD
git cherry-pick -x a39f3087092716f2bd531d6fdc20403c3dc2a879
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051210-devourer-antarctic-1ed3@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a39f3087092716f2bd531d6fdc20403c3dc2a879 Mon Sep 17 00:00:00 2001
From: Miguel Ojeda <ojeda(a)kernel.org>
Date: Fri, 2 May 2025 16:02:34 +0200
Subject: [PATCH] rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
Starting with Rust 1.87.0 (expected 2025-05-15) [1], Clippy may expand
the `ptr_eq` lint, e.g.:
error: use `core::ptr::eq` when comparing raw pointers
--> rust/kernel/list.rs:438:12
|
438 | if self.first == item {
| ^^^^^^^^^^^^^^^^^^ help: try: `core::ptr::eq(self.first, item)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_eq
= note: `-D clippy::ptr-eq` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_eq)]`
It is expected that a PR to relax the lint will be backported [2] by
the time Rust 1.87.0 releases, since the lint was considered too eager
(at least by default) [3].
Thus allow the lint temporarily just in case.
Cc: stable(a)vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14339 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/14526 [2]
Link: https://github.com/rust-lang/rust-clippy/issues/14525 [3]
Link: https://lore.kernel.org/r/20250502140237.1659624-3-ojeda@kernel.org
[ Converted to `allow`s since backport was confirmed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda(a)kernel.org>
diff --git a/rust/kernel/alloc/kvec.rs b/rust/kernel/alloc/kvec.rs
index ae9d072741ce..87a71fd40c3c 100644
--- a/rust/kernel/alloc/kvec.rs
+++ b/rust/kernel/alloc/kvec.rs
@@ -2,6 +2,9 @@
//! Implementation of [`Vec`].
+// May not be needed in Rust 1.87.0 (pending beta backport).
+#![allow(clippy::ptr_eq)]
+
use super::{
allocator::{KVmalloc, Kmalloc, Vmalloc},
layout::ArrayLayout,
diff --git a/rust/kernel/list.rs b/rust/kernel/list.rs
index a335c3b1ff5e..2054682c5724 100644
--- a/rust/kernel/list.rs
+++ b/rust/kernel/list.rs
@@ -4,6 +4,9 @@
//! A linked list implementation.
+// May not be needed in Rust 1.87.0 (pending beta backport).
+#![allow(clippy::ptr_eq)]
+
use crate::sync::ArcBorrow;
use crate::types::Opaque;
use core::iter::{DoubleEndedIterator, FusedIterator};
From: Jakub Kicinski <kuba(a)kernel.org>
[ Upstream commit 52f671db18823089a02f07efc04efdb2272ddc17 ]
The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog
for nested calls to mirred ingress") hangs our testing VMs every 10 or so
runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by
lockdep.
The problem as previously described by Davide (see Link) is that
if we reverse flow of traffic with the redirect (egress -> ingress)
we may reach the same socket which generated the packet. And we may
still be holding its socket lock. The common solution to such deadlocks
is to put the packet in the Rx backlog, rather than run the Rx path
inline. Do that for all egress -> ingress reversals, not just once
we started to nest mirred calls.
In the past there was a concern that the backlog indirection will
lead to loss of error reporting / less accurate stats. But the current
workaround does not seem to address the issue.
Fixes: 53592b364001 ("net/sched: act_mirred: Implement ingress actions")
Cc: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com>
Suggested-by: Davide Caratti <dcaratti(a)redhat.com>
Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.166…
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
Acked-by: Jamal Hadi Salim <jhs(a)mojatatu.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
net/sched/act_mirred.c | 14 +++++---------
.../testing/selftests/net/forwarding/tc_actions.sh | 3 ---
2 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index bbc34987bd09..896bffd50aa8 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -205,18 +205,14 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla,
return err;
}
-static bool is_mirred_nested(void)
-{
- return unlikely(__this_cpu_read(mirred_nest_level) > 1);
-}
-
-static int tcf_mirred_forward(bool want_ingress, struct sk_buff *skb)
+static int
+tcf_mirred_forward(bool at_ingress, bool want_ingress, struct sk_buff *skb)
{
int err;
if (!want_ingress)
err = tcf_dev_queue_xmit(skb, dev_queue_xmit);
- else if (is_mirred_nested())
+ else if (!at_ingress)
err = netif_rx(skb);
else
err = netif_receive_skb(skb);
@@ -312,7 +308,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
/* let's the caller reinsert the packet, if possible */
if (use_reinsert) {
- err = tcf_mirred_forward(want_ingress, skb);
+ err = tcf_mirred_forward(at_ingress, want_ingress, skb);
if (err)
tcf_action_inc_overlimit_qstats(&m->common);
__this_cpu_dec(mirred_nest_level);
@@ -320,7 +316,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
}
}
- err = tcf_mirred_forward(want_ingress, skb2);
+ err = tcf_mirred_forward(at_ingress, want_ingress, skb2);
if (err)
tcf_action_inc_overlimit_qstats(&m->common);
__this_cpu_dec(mirred_nest_level);
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh
index b0f5e55d2d0b..589629636502 100755
--- a/tools/testing/selftests/net/forwarding/tc_actions.sh
+++ b/tools/testing/selftests/net/forwarding/tc_actions.sh
@@ -235,9 +235,6 @@ mirred_egress_to_ingress_tcp_test()
check_err $? "didn't mirred redirect ICMP"
tc_check_packets "dev $h1 ingress" 102 10
check_err $? "didn't drop mirred ICMP"
- local overlimits=$(tc_rule_stats_get ${h1} 101 egress .overlimits)
- test ${overlimits} = 10
- check_err $? "wrong overlimits, expected 10 got ${overlimits}"
tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower
tc filter del dev $h1 egress protocol ip pref 101 handle 101 flower
--
2.34.1
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x a39f3087092716f2bd531d6fdc20403c3dc2a879
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051211-unclothed-common-f6cf@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a39f3087092716f2bd531d6fdc20403c3dc2a879 Mon Sep 17 00:00:00 2001
From: Miguel Ojeda <ojeda(a)kernel.org>
Date: Fri, 2 May 2025 16:02:34 +0200
Subject: [PATCH] rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
Starting with Rust 1.87.0 (expected 2025-05-15) [1], Clippy may expand
the `ptr_eq` lint, e.g.:
error: use `core::ptr::eq` when comparing raw pointers
--> rust/kernel/list.rs:438:12
|
438 | if self.first == item {
| ^^^^^^^^^^^^^^^^^^ help: try: `core::ptr::eq(self.first, item)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_eq
= note: `-D clippy::ptr-eq` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_eq)]`
It is expected that a PR to relax the lint will be backported [2] by
the time Rust 1.87.0 releases, since the lint was considered too eager
(at least by default) [3].
Thus allow the lint temporarily just in case.
Cc: stable(a)vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14339 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/14526 [2]
Link: https://github.com/rust-lang/rust-clippy/issues/14525 [3]
Link: https://lore.kernel.org/r/20250502140237.1659624-3-ojeda@kernel.org
[ Converted to `allow`s since backport was confirmed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda(a)kernel.org>
diff --git a/rust/kernel/alloc/kvec.rs b/rust/kernel/alloc/kvec.rs
index ae9d072741ce..87a71fd40c3c 100644
--- a/rust/kernel/alloc/kvec.rs
+++ b/rust/kernel/alloc/kvec.rs
@@ -2,6 +2,9 @@
//! Implementation of [`Vec`].
+// May not be needed in Rust 1.87.0 (pending beta backport).
+#![allow(clippy::ptr_eq)]
+
use super::{
allocator::{KVmalloc, Kmalloc, Vmalloc},
layout::ArrayLayout,
diff --git a/rust/kernel/list.rs b/rust/kernel/list.rs
index a335c3b1ff5e..2054682c5724 100644
--- a/rust/kernel/list.rs
+++ b/rust/kernel/list.rs
@@ -4,6 +4,9 @@
//! A linked list implementation.
+// May not be needed in Rust 1.87.0 (pending beta backport).
+#![allow(clippy::ptr_eq)]
+
use crate::sync::ArcBorrow;
use crate::types::Opaque;
use core::iter::{DoubleEndedIterator, FusedIterator};
The patch titled
Subject: XArray: fix kmemleak false positive in xas_shrink()
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
xarray-fix-kmemleak-false-positive-in-xas_shrink.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche…
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Jared Kangas <jkangas(a)redhat.com>
Subject: XArray: fix kmemleak false positive in xas_shrink()
Date: Mon, 12 May 2025 12:17:07 -0700
Kmemleak periodically produces a false positive report that resembles
the following:
unreferenced object 0xffff0000c105ed08 (size 576):
comm "swapper/0", pid 1, jiffies 4294937478
hex dump (first 32 bytes):
00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d8 e7 0a 8b 00 80 ff ff 20 ed 05 c1 00 00 ff ff ........ .......
backtrace (crc 69e99671):
kmemleak_alloc+0xb4/0xc4
kmem_cache_alloc_lru+0x1f0/0x244
xas_alloc+0x2a0/0x3a0
xas_expand.constprop.0+0x144/0x4dc
xas_create+0x2b0/0x484
xas_store+0x60/0xa00
__xa_alloc+0x194/0x280
__xa_alloc_cyclic+0x104/0x2e0
dev_index_reserve+0xd8/0x18c
register_netdevice+0x5e8/0xf90
register_netdev+0x28/0x50
loopback_net_init+0x68/0x114
ops_init+0x90/0x2c0
register_pernet_operations+0x20c/0x554
register_pernet_device+0x3c/0x8c
net_dev_init+0x5cc/0x7d8
This transient leak can be traced to xas_shrink(): when the xarray's
head is reassigned, kmemleak may have already started scanning the
xarray. When this happens, if kmemleak fails to scan the new xa_head
before it moves, kmemleak will see it as a leak until the xarray is
scanned again.
The report can be reproduced by running the xdp_bonding BPF selftest,
although it doesn't appear consistently due to the bug's transience.
In my testing, the following script has reliably triggered the report in
under an hour on a debug kernel with kmemleak enabled, where KSELFTESTS
is set to the install path for the kernel selftests:
#!/bin/sh
set -eu
echo 1 >/sys/module/kmemleak/parameters/verbose
echo scan=1 >/sys/kernel/debug/kmemleak
while :; do
$KSELFTESTS/bpf/test_progs -t xdp_bonding
done
To prevent this false positive report, mark the new xa_head in
xas_shrink() as a transient leak.
Link: https://lkml.kernel.org/r/20250512191707.245153-1-jkangas@redhat.com
Signed-off-by: Jared Kangas <jkangas(a)redhat.com>
Cc: Catalin Marinas <catalin.marinas(a)arm.com>
Cc: Jared Kangas <jkangas(a)redhat.com>
Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
lib/xarray.c | 2 ++
1 file changed, 2 insertions(+)
--- a/lib/xarray.c~xarray-fix-kmemleak-false-positive-in-xas_shrink
+++ a/lib/xarray.c
@@ -8,6 +8,7 @@
#include <linux/bitmap.h>
#include <linux/export.h>
+#include <linux/kmemleak.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/xarray.h>
@@ -476,6 +477,7 @@ static void xas_shrink(struct xa_state *
break;
node = xa_to_node(entry);
node->parent = NULL;
+ kmemleak_transient_leak(node);
}
}
_
Patches currently in -mm which might be from jkangas(a)redhat.com are
xarray-fix-kmemleak-false-positive-in-xas_shrink.patch
When increasing the array size in memblock_double_array() and the slab
is not yet available, a call to memblock_find_in_range() is used to
reserve/allocate memory. However, the range returned may not have been
accepted, which can result in a crash when booting an SNP guest:
RIP: 0010:memcpy_orig+0x68/0x130
Code: ...
RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006
RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000
RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00
RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000
R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78
R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00
memblock_double_array+0xff/0x310
memblock_add_range+0x1fb/0x2f0
memblock_reserve+0x4f/0xa0
memblock_alloc_range_nid+0xac/0x130
memblock_alloc_internal+0x53/0xc0
memblock_alloc_try_nid+0x3d/0xa0
swiotlb_init_remap+0x149/0x2f0
mem_init+0xb/0xb0
mm_core_init+0x8f/0x350
start_kernel+0x17e/0x5d0
x86_64_start_reservations+0x14/0x30
x86_64_start_kernel+0x92/0xa0
secondary_startup_64_no_verify+0x194/0x19b
Mitigate this by calling accept_memory() on the memory range returned
before the slab is available.
Prior to v6.12, the accept_memory() interface used a 'start' and 'end'
parameter instead of 'start' and 'size', therefore the accept_memory()
call must be adjusted to specify 'start + size' for 'end' when applying
to kernels prior to v6.12.
Cc: <stable(a)vger.kernel.org> # see patch description, needs adjustments for <= 6.11
Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory")
Signed-off-by: Tom Lendacky <thomas.lendacky(a)amd.com>
---
mm/memblock.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/mm/memblock.c b/mm/memblock.c
index 0a53db4d9f7b..30fa553e9634 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -457,7 +457,14 @@ static int __init_memblock memblock_double_array(struct memblock_type *type,
min(new_area_start, memblock.current_limit),
new_alloc_size, PAGE_SIZE);
- new_array = addr ? __va(addr) : NULL;
+ if (addr) {
+ /* The memory may not have been accepted, yet. */
+ accept_memory(addr, new_alloc_size);
+
+ new_array = __va(addr);
+ } else {
+ new_array = NULL;
+ }
}
if (!addr) {
pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
base-commit: fc96b232f8e7c0a6c282f47726b2ff6a5fb341d2
--
2.46.2
From: Zack Rusin <zack.rusin(a)broadcom.com>
commit e58337100721f3cc0c7424a18730e4f39844934f upstream.
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.
vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.
dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.
Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock.
Signed-off-by: Zack Rusin <zack.rusin(a)broadcom.com>
Fixes: 2298e804e96e ("drm/vmwgfx: rework to new fence interface, v2")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list(a)broadcom.com>
Cc: dri-devel(a)lists.freedesktop.org
Cc: <stable(a)vger.kernel.org> # v6.2+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala(a)broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev(a)broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-2-zack.…
[Minor context change fixed]
Signed-off-by: Zhi Yang <Zhi.Yang(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
index 6bacdb7583df..0505f87d13c0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -32,7 +32,6 @@
#define VMW_FENCE_WRAP (1 << 31)
struct vmw_fence_manager {
- int num_fence_objects;
struct vmw_private *dev_priv;
spinlock_t lock;
struct list_head fence_list;
@@ -113,13 +112,13 @@ static void vmw_fence_obj_destroy(struct dma_fence *f)
{
struct vmw_fence_obj *fence =
container_of(f, struct vmw_fence_obj, base);
-
struct vmw_fence_manager *fman = fman_from_fence(fence);
- spin_lock(&fman->lock);
- list_del_init(&fence->head);
- --fman->num_fence_objects;
- spin_unlock(&fman->lock);
+ if (!list_empty(&fence->head)) {
+ spin_lock(&fman->lock);
+ list_del_init(&fence->head);
+ spin_unlock(&fman->lock);
+ }
fence->destroy(fence);
}
@@ -250,7 +249,6 @@ static const struct dma_fence_ops vmw_fence_ops = {
.release = vmw_fence_obj_destroy,
};
-
/**
* Execute signal actions on fences recently signaled.
* This is done from a workqueue so we don't have to execute
@@ -353,7 +351,6 @@ static int vmw_fence_obj_init(struct vmw_fence_manager *fman,
goto out_unlock;
}
list_add_tail(&fence->head, &fman->fence_list);
- ++fman->num_fence_objects;
out_unlock:
spin_unlock(&fman->lock);
@@ -402,7 +399,7 @@ static bool vmw_fence_goal_new_locked(struct vmw_fence_manager *fman,
{
u32 goal_seqno;
u32 *fifo_mem;
- struct vmw_fence_obj *fence;
+ struct vmw_fence_obj *fence, *next_fence;
if (likely(!fman->seqno_valid))
return false;
@@ -413,7 +410,7 @@ static bool vmw_fence_goal_new_locked(struct vmw_fence_manager *fman,
return false;
fman->seqno_valid = false;
- list_for_each_entry(fence, &fman->fence_list, head) {
+ list_for_each_entry_safe(fence, next_fence, &fman->fence_list, head) {
if (!list_empty(&fence->seq_passed_actions)) {
fman->seqno_valid = true;
vmw_mmio_write(fence->base.seqno,
--
2.34.1
From: Dan Carpenter <dan.carpenter(a)linaro.org>
[ Upstream commit e56aac6e5a25630645607b6856d4b2a17b2311a5 ]
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow.
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com>
Link: https://lore.kernel.org/r/c69ef0b3-61b0-4dde-98dd-97b97f81d912@stanley.moun…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
[The function ucsi_ccg_sync_write() is renamed to ucsi_ccg_sync_control()
in commit 13f2ec3115c8 ("usb: typec: ucsi:simplify command sending API").
Apply this patch to ucsi_ccg_sync_write() in 5.15.y accordingly.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index fb6211efb5d8..3983bf21a580 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -573,6 +573,10 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
uc->has_multiple_dp) {
con_index = (uc->last_cmd_sent >> 16) &
UCSI_CMD_CONNECTOR_MASK;
+ if (con_index == 0) {
+ ret = -EINVAL;
+ goto unlock;
+ }
con = &uc->ucsi->connector[con_index - 1];
ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val);
}
@@ -588,6 +592,7 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
err_clear_bit:
clear_bit(DEV_CMD_PENDING, &uc->flags);
pm_runtime_put_sync(uc->dev);
+unlock:
mutex_unlock(&uc->lock);
return ret;
--
2.34.1
This reverts commit 887c5c12e80c ("um: work around sched_yield not yielding in time-travel mode")
added with v6.12.25.
Reason being that the patch depends on at least
commit 0b8b2668f998 ("um: insert scheduler ticks when userspace does not yield")
in order to build. Otherwise it fails with:
| /usr/bin/ld: arch/um/kernel/skas/syscall.o: in function `handle_syscall':
| linux-6.12.27/arch/um/kernel/skas/syscall.c:43:(.text+0xa2): undefined
| reference to `tt_extra_sched_jiffies'
| collect2: error: ld returned 1 exit status
The author Benjamin Berg commented: "I think it is better to just not backport
commit 0b8b2668f998 ("um: insert scheduler ticks when userspace does not yield")
"
Link: https://lore.kernel.org/linux-um/8ce0b6056a9726e540f61bce77311278654219eb.c…
Cc: <stable(a)vger.kernel.org> # 6.12.y
Cc: Benjamin Berg <benjamin.berg(a)intel.com>
Signed-off-by: Christian Lamparter <chunkeey(a)gmail.com>
---
Just in case, this throws someone else for a space-time loop:
What's interessting/very strange strange about this time-travel stuff:
|commit 0b8b2668f998 ("um: insert scheduler ticks when userspace does not yield")
$ git describe 0b8b2668f998
=> v6.12-rc2-43-g0b8b2668f998
(from what I know this is 43 patches on top of v6.12-rc2 as per the man page:
"The command finds the most recent tag that is reachable from a commit. [...]
it suffixes the tag name with the number of additional commits on top of the tagged
object and the abbreviated object name of the most recent commit."
But it was merged as part of: uml-for-linus-6.13-rc1 :
https://lore.kernel.org/lkml/1155823186.11802667.1732921581257.JavaMail.zim…
---
arch/um/include/linux/time-internal.h | 2 --
arch/um/kernel/skas/syscall.c | 11 -----------
2 files changed, 13 deletions(-)
diff --git a/arch/um/include/linux/time-internal.h b/arch/um/include/linux/time-internal.h
index 138908b999d7..b22226634ff6 100644
--- a/arch/um/include/linux/time-internal.h
+++ b/arch/um/include/linux/time-internal.h
@@ -83,8 +83,6 @@ extern void time_travel_not_configured(void);
#define time_travel_del_event(...) time_travel_not_configured()
#endif /* CONFIG_UML_TIME_TRAVEL_SUPPORT */
-extern unsigned long tt_extra_sched_jiffies;
-
/*
* Without CONFIG_UML_TIME_TRAVEL_SUPPORT this is a linker error if used,
* which is intentional since we really shouldn't link it in that case.
diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c
index a5beaea2967e..b09e85279d2b 100644
--- a/arch/um/kernel/skas/syscall.c
+++ b/arch/um/kernel/skas/syscall.c
@@ -31,17 +31,6 @@ void handle_syscall(struct uml_pt_regs *r)
goto out;
syscall = UPT_SYSCALL_NR(r);
-
- /*
- * If no time passes, then sched_yield may not actually yield, causing
- * broken spinlock implementations in userspace (ASAN) to hang for long
- * periods of time.
- */
- if ((time_travel_mode == TT_MODE_INFCPU ||
- time_travel_mode == TT_MODE_EXTERNAL) &&
- syscall == __NR_sched_yield)
- tt_extra_sched_jiffies += 1;
-
if (syscall >= 0 && syscall < __NR_syscalls) {
unsigned long ret = EXECUTE_SYSCALL(syscall, regs);
--
2.49.0
From: Linus Torvalds <torvalds(a)linux-foundation.org>
[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]
... and use it to limit the virtual terminals to just N_TTY. They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.
Tested-by: Tetsuo Handa <penguin-kernel(a)i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby(a)kernel.org>
Cc: Andrew Morton <akpm(a)linux-foundation.org>
Cc: Daniel Starke <daniel.starke(a)siemens.com>
Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c(a)syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org>
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
[Minor conflict resolved due to code context change. And also backport description
comments for struct tty_operations.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
drivers/tty/tty_ldisc.c | 6 +
drivers/tty/vt/vt.c | 10 ++
include/linux/tty_driver.h | 339 +++++++++++++++++++++++++++++++++++++
3 files changed, 355 insertions(+)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 7262f45b513b..0dae579efdd9 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -579,6 +579,12 @@ int tty_set_ldisc(struct tty_struct *tty, int disc)
goto out;
}
+ if (tty->ops->ldisc_ok) {
+ retval = tty->ops->ldisc_ok(tty, disc);
+ if (retval)
+ goto out;
+ }
+
old_ldisc = tty->ldisc;
/* Shutdown the old discipline. */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 5d9de3a53548..a772c614a878 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3448,6 +3448,15 @@ static void con_cleanup(struct tty_struct *tty)
tty_port_put(&vc->port);
}
+/*
+ * We can't deal with anything but the N_TTY ldisc,
+ * because we can sleep in our write() routine.
+ */
+static int con_ldisc_ok(struct tty_struct *tty, int ldisc)
+{
+ return ldisc == N_TTY ? 0 : -EINVAL;
+}
+
static int default_color = 7; /* white */
static int default_italic_color = 2; // green (ASCII)
static int default_underline_color = 3; // cyan (ASCII)
@@ -3576,6 +3585,7 @@ static const struct tty_operations con_ops = {
.resize = vt_resize,
.shutdown = con_shutdown,
.cleanup = con_cleanup,
+ .ldisc_ok = con_ldisc_ok,
};
static struct cdev vc0_cdev;
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 2f719b471d52..3412eb7280da 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -243,6 +243,344 @@ struct tty_driver;
struct serial_icounter_struct;
struct serial_struct;
+/**
+ * struct tty_operations -- interface between driver and tty
+ *
+ * @lookup: ``struct tty_struct *()(struct tty_driver *self, struct file *,
+ * int idx)``
+ *
+ * Return the tty device corresponding to @idx, %NULL if there is not
+ * one currently in use and an %ERR_PTR value on error. Called under
+ * %tty_mutex (for now!)
+ *
+ * Optional method. Default behaviour is to use the @self->ttys array.
+ *
+ * @install: ``int ()(struct tty_driver *self, struct tty_struct *tty)``
+ *
+ * Install a new @tty into the @self's internal tables. Used in
+ * conjunction with @lookup and @remove methods.
+ *
+ * Optional method. Default behaviour is to use the @self->ttys array.
+ *
+ * @remove: ``void ()(struct tty_driver *self, struct tty_struct *tty)``
+ *
+ * Remove a closed @tty from the @self's internal tables. Used in
+ * conjunction with @lookup and @remove methods.
+ *
+ * Optional method. Default behaviour is to use the @self->ttys array.
+ *
+ * @open: ``int ()(struct tty_struct *tty, struct file *)``
+ *
+ * This routine is called when a particular @tty device is opened. This
+ * routine is mandatory; if this routine is not filled in, the attempted
+ * open will fail with %ENODEV.
+ *
+ * Required method. Called with tty lock held. May sleep.
+ *
+ * @close: ``void ()(struct tty_struct *tty, struct file *)``
+ *
+ * This routine is called when a particular @tty device is closed. At the
+ * point of return from this call the driver must make no further ldisc
+ * calls of any kind.
+ *
+ * Remark: called even if the corresponding @open() failed.
+ *
+ * Required method. Called with tty lock held. May sleep.
+ *
+ * @shutdown: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine is called under the tty lock when a particular @tty device
+ * is closed for the last time. It executes before the @tty resources
+ * are freed so may execute while another function holds a @tty kref.
+ *
+ * @cleanup: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine is called asynchronously when a particular @tty device
+ * is closed for the last time freeing up the resources. This is
+ * actually the second part of shutdown for routines that might sleep.
+ *
+ * @write: ``int ()(struct tty_struct *tty, const unsigned char *buf,
+ * int count)``
+ *
+ * This routine is called by the kernel to write a series (@count) of
+ * characters (@buf) to the @tty device. The characters may come from
+ * user space or kernel space. This routine will return the
+ * number of characters actually accepted for writing.
+ *
+ * May occur in parallel in special cases. Because this includes panic
+ * paths drivers generally shouldn't try and do clever locking here.
+ *
+ * Optional: Required for writable devices. May not sleep.
+ *
+ * @put_char: ``int ()(struct tty_struct *tty, unsigned char ch)``
+ *
+ * This routine is called by the kernel to write a single character @ch to
+ * the @tty device. If the kernel uses this routine, it must call the
+ * @flush_chars() routine (if defined) when it is done stuffing characters
+ * into the driver. If there is no room in the queue, the character is
+ * ignored.
+ *
+ * Optional: Kernel will use the @write method if not provided. Do not
+ * call this function directly, call tty_put_char().
+ *
+ * @flush_chars: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine is called by the kernel after it has written a
+ * series of characters to the tty device using @put_char().
+ *
+ * Optional. Do not call this function directly, call
+ * tty_driver_flush_chars().
+ *
+ * @write_room: ``int ()(struct tty_struct *tty)``
+ *
+ * This routine returns the numbers of characters the @tty driver
+ * will accept for queuing to be written. This number is subject
+ * to change as output buffers get emptied, or if the output flow
+ * control is acted.
+ *
+ * The ldisc is responsible for being intelligent about multi-threading of
+ * write_room/write calls
+ *
+ * Required if @write method is provided else not needed. Do not call this
+ * function directly, call tty_write_room()
+ *
+ * @chars_in_buffer: ``int ()(struct tty_struct *tty)``
+ *
+ * This routine returns the number of characters in the device private
+ * output queue. Used in tty_wait_until_sent() and for poll()
+ * implementation.
+ *
+ * Optional: if not provided, it is assumed there is no queue on the
+ * device. Do not call this function directly, call tty_chars_in_buffer().
+ *
+ * @ioctl: ``int ()(struct tty_struct *tty, unsigned int cmd,
+ * unsigned long arg)``
+ *
+ * This routine allows the @tty driver to implement device-specific
+ * ioctls. If the ioctl number passed in @cmd is not recognized by the
+ * driver, it should return %ENOIOCTLCMD.
+ *
+ * Optional.
+ *
+ * @compat_ioctl: ``long ()(struct tty_struct *tty, unsigned int cmd,
+ * unsigned long arg)``
+ *
+ * Implement ioctl processing for 32 bit process on 64 bit system.
+ *
+ * Optional.
+ *
+ * @set_termios: ``void ()(struct tty_struct *tty, struct ktermios *old)``
+ *
+ * This routine allows the @tty driver to be notified when device's
+ * termios settings have changed. New settings are in @tty->termios.
+ * Previous settings are passed in the @old argument.
+ *
+ * The API is defined such that the driver should return the actual modes
+ * selected. This means that the driver is responsible for modifying any
+ * bits in @tty->termios it cannot fulfill to indicate the actual modes
+ * being used.
+ *
+ * Optional. Called under the @tty->termios_rwsem. May sleep.
+ *
+ * @ldisc_ok: ``int ()(struct tty_struct *tty, int ldisc)``
+ *
+ * This routine allows the @tty driver to decide if it can deal
+ * with a particular @ldisc.
+ *
+ * Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem.
+ *
+ * @set_ldisc: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine allows the @tty driver to be notified when the device's
+ * line discipline is being changed. At the point this is done the
+ * discipline is not yet usable.
+ *
+ * Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem.
+ *
+ * @throttle: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that input buffers for the line
+ * discipline are close to full, and it should somehow signal that no more
+ * characters should be sent to the @tty.
+ *
+ * Serialization including with @unthrottle() is the job of the ldisc
+ * layer.
+ *
+ * Optional: Always invoke via tty_throttle_safe(). Called under the
+ * @tty->termios_rwsem.
+ *
+ * @unthrottle: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it should signal that
+ * characters can now be sent to the @tty without fear of overrunning the
+ * input buffers of the line disciplines.
+ *
+ * Optional. Always invoke via tty_unthrottle(). Called under the
+ * @tty->termios_rwsem.
+ *
+ * @stop: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it should stop outputting
+ * characters to the tty device.
+ *
+ * Called with @tty->flow.lock held. Serialized with @start() method.
+ *
+ * Optional. Always invoke via stop_tty().
+ *
+ * @start: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it resumed sending
+ * characters to the @tty device.
+ *
+ * Called with @tty->flow.lock held. Serialized with stop() method.
+ *
+ * Optional. Always invoke via start_tty().
+ *
+ * @hangup: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine notifies the @tty driver that it should hang up the @tty
+ * device.
+ *
+ * Optional. Called with tty lock held.
+ *
+ * @break_ctl: ``int ()(struct tty_struct *tty, int state)``
+ *
+ * This optional routine requests the @tty driver to turn on or off BREAK
+ * status on the RS-232 port. If @state is -1, then the BREAK status
+ * should be turned on; if @state is 0, then BREAK should be turned off.
+ *
+ * If this routine is implemented, the high-level tty driver will handle
+ * the following ioctls: %TCSBRK, %TCSBRKP, %TIOCSBRK, %TIOCCBRK.
+ *
+ * If the driver sets %TTY_DRIVER_HARDWARE_BREAK in tty_alloc_driver(),
+ * then the interface will also be called with actual times and the
+ * hardware is expected to do the delay work itself. 0 and -1 are still
+ * used for on/off.
+ *
+ * Optional: Required for %TCSBRK/%BRKP/etc. handling. May sleep.
+ *
+ * @flush_buffer: ``void ()(struct tty_struct *tty)``
+ *
+ * This routine discards device private output buffer. Invoked on close,
+ * hangup, to implement %TCOFLUSH ioctl and similar.
+ *
+ * Optional: if not provided, it is assumed there is no queue on the
+ * device. Do not call this function directly, call
+ * tty_driver_flush_buffer().
+ *
+ * @wait_until_sent: ``void ()(struct tty_struct *tty, int timeout)``
+ *
+ * This routine waits until the device has written out all of the
+ * characters in its transmitter FIFO. Or until @timeout (in jiffies) is
+ * reached.
+ *
+ * Optional: If not provided, the device is assumed to have no FIFO.
+ * Usually correct to invoke via tty_wait_until_sent(). May sleep.
+ *
+ * @send_xchar: ``void ()(struct tty_struct *tty, char ch)``
+ *
+ * This routine is used to send a high-priority XON/XOFF character (@ch)
+ * to the @tty device.
+ *
+ * Optional: If not provided, then the @write method is called under
+ * the @tty->atomic_write_lock to keep it serialized with the ldisc.
+ *
+ * @tiocmget: ``int ()(struct tty_struct *tty)``
+ *
+ * This routine is used to obtain the modem status bits from the @tty
+ * driver.
+ *
+ * Optional: If not provided, then %ENOTTY is returned from the %TIOCMGET
+ * ioctl. Do not call this function directly, call tty_tiocmget().
+ *
+ * @tiocmset: ``int ()(struct tty_struct *tty,
+ * unsigned int set, unsigned int clear)``
+ *
+ * This routine is used to set the modem status bits to the @tty driver.
+ * First, @clear bits should be cleared, then @set bits set.
+ *
+ * Optional: If not provided, then %ENOTTY is returned from the %TIOCMSET
+ * ioctl. Do not call this function directly, call tty_tiocmset().
+ *
+ * @resize: ``int ()(struct tty_struct *tty, struct winsize *ws)``
+ *
+ * Called when a termios request is issued which changes the requested
+ * terminal geometry to @ws.
+ *
+ * Optional: the default action is to update the termios structure
+ * without error. This is usually the correct behaviour. Drivers should
+ * not force errors here if they are not resizable objects (e.g. a serial
+ * line). See tty_do_resize() if you need to wrap the standard method
+ * in your own logic -- the usual case.
+ *
+ * @get_icount: ``int ()(struct tty_struct *tty,
+ * struct serial_icounter *icount)``
+ *
+ * Called when the @tty device receives a %TIOCGICOUNT ioctl. Passed a
+ * kernel structure @icount to complete.
+ *
+ * Optional: called only if provided, otherwise %ENOTTY will be returned.
+ *
+ * @get_serial: ``int ()(struct tty_struct *tty, struct serial_struct *p)``
+ *
+ * Called when the @tty device receives a %TIOCGSERIAL ioctl. Passed a
+ * kernel structure @p (&struct serial_struct) to complete.
+ *
+ * Optional: called only if provided, otherwise %ENOTTY will be returned.
+ * Do not call this function directly, call tty_tiocgserial().
+ *
+ * @set_serial: ``int ()(struct tty_struct *tty, struct serial_struct *p)``
+ *
+ * Called when the @tty device receives a %TIOCSSERIAL ioctl. Passed a
+ * kernel structure @p (&struct serial_struct) to set the values from.
+ *
+ * Optional: called only if provided, otherwise %ENOTTY will be returned.
+ * Do not call this function directly, call tty_tiocsserial().
+ *
+ * @show_fdinfo: ``void ()(struct tty_struct *tty, struct seq_file *m)``
+ *
+ * Called when the @tty device file descriptor receives a fdinfo request
+ * from VFS (to show in /proc/<pid>/fdinfo/). @m should be filled with
+ * information.
+ *
+ * Optional: called only if provided, otherwise nothing is written to @m.
+ * Do not call this function directly, call tty_show_fdinfo().
+ *
+ * @poll_init: ``int ()(struct tty_driver *driver, int line, char *options)``
+ *
+ * kgdboc support (Documentation/dev-tools/kgdb.rst). This routine is
+ * called to initialize the HW for later use by calling @poll_get_char or
+ * @poll_put_char.
+ *
+ * Optional: called only if provided, otherwise skipped as a non-polling
+ * driver.
+ *
+ * @poll_get_char: ``int ()(struct tty_driver *driver, int line)``
+ *
+ * kgdboc support (see @poll_init). @driver should read a character from a
+ * tty identified by @line and return it.
+ *
+ * Optional: called only if @poll_init provided.
+ *
+ * @poll_put_char: ``void ()(struct tty_driver *driver, int line, char ch)``
+ *
+ * kgdboc support (see @poll_init). @driver should write character @ch to
+ * a tty identified by @line.
+ *
+ * Optional: called only if @poll_init provided.
+ *
+ * @proc_show: ``int ()(struct seq_file *m, void *driver)``
+ *
+ * Driver @driver (cast to &struct tty_driver) can show additional info in
+ * /proc/tty/driver/<driver_name>. It is enough to fill in the information
+ * into @m.
+ *
+ * Optional: called only if provided, otherwise no /proc entry created.
+ *
+ * This structure defines the interface between the low-level tty driver and
+ * the tty routines. These routines can be defined. Unless noted otherwise,
+ * they are optional, and can be filled in with a %NULL pointer.
+ */
struct tty_operations {
struct tty_struct * (*lookup)(struct tty_driver *driver,
struct file *filp, int idx);
@@ -270,6 +608,7 @@ struct tty_operations {
void (*hangup)(struct tty_struct *tty);
int (*break_ctl)(struct tty_struct *tty, int state);
void (*flush_buffer)(struct tty_struct *tty);
+ int (*ldisc_ok)(struct tty_struct *tty, int ldisc);
void (*set_ldisc)(struct tty_struct *tty);
void (*wait_until_sent)(struct tty_struct *tty, int timeout);
void (*send_xchar)(struct tty_struct *tty, char ch);
--
2.34.1
From: Dan Carpenter <dan.carpenter(a)linaro.org>
[ Upstream commit e56aac6e5a25630645607b6856d4b2a17b2311a5 ]
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow.
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com>
Link: https://lore.kernel.org/r/c69ef0b3-61b0-4dde-98dd-97b97f81d912@stanley.moun…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
[The function ucsi_ccg_sync_write() is renamed to ucsi_ccg_sync_control()
in commit 13f2ec3115c8 ("usb: typec: ucsi:simplify command sending API").
Apply this patch to ucsi_ccg_sync_write() in 6.1.y accordingly.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 8e500fe41e78..4801d783bd0c 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -585,6 +585,10 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
uc->has_multiple_dp) {
con_index = (uc->last_cmd_sent >> 16) &
UCSI_CMD_CONNECTOR_MASK;
+ if (con_index == 0) {
+ ret = -EINVAL;
+ goto unlock;
+ }
con = &uc->ucsi->connector[con_index - 1];
ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val);
}
@@ -600,6 +604,7 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
err_clear_bit:
clear_bit(DEV_CMD_PENDING, &uc->flags);
pm_runtime_put_sync(uc->dev);
+unlock:
mutex_unlock(&uc->lock);
return ret;
--
2.34.1
From: Dan Carpenter <dan.carpenter(a)linaro.org>
[ Upstream commit e56aac6e5a25630645607b6856d4b2a17b2311a5 ]
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow.
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com>
Link: https://lore.kernel.org/r/c69ef0b3-61b0-4dde-98dd-97b97f81d912@stanley.moun…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
[The function ucsi_ccg_sync_write() is renamed to ucsi_ccg_sync_control()
in commit 13f2ec3115c8 ("usb: typec: ucsi:simplify command sending API").
Apply this patch to ucsi_ccg_sync_write() in 5.10.y accordingly.]
Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Build test passed.
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index fb6211efb5d8..3983bf21a580 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -573,6 +573,10 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
uc->has_multiple_dp) {
con_index = (uc->last_cmd_sent >> 16) &
UCSI_CMD_CONNECTOR_MASK;
+ if (con_index == 0) {
+ ret = -EINVAL;
+ goto unlock;
+ }
con = &uc->ucsi->connector[con_index - 1];
ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val);
}
@@ -588,6 +592,7 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
err_clear_bit:
clear_bit(DEV_CMD_PENDING, &uc->flags);
pm_runtime_put_sync(uc->dev);
+unlock:
mutex_unlock(&uc->lock);
return ret;
--
2.34.1
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x c23c03bf1faa1e76be1eba35bad6da6a2a7c95ee
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025050930-scuba-spending-0eb9@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From c23c03bf1faa1e76be1eba35bad6da6a2a7c95ee Mon Sep 17 00:00:00 2001
From: Cristian Marussi <cristian.marussi(a)arm.com>
Date: Mon, 10 Mar 2025 17:58:00 +0000
Subject: [PATCH] firmware: arm_scmi: Fix timeout checks on polling path
Polling mode transactions wait for a reply busy-looping without holding a
spinlock, but currently the timeout checks are based only on elapsed time:
as a result we could hit a false positive whenever our busy-looping thread
is pre-empted and scheduled out for a time greater than the polling
timeout.
Change the checks at the end of the busy-loop to make sure that the polling
wasn't indeed successful or an out-of-order reply caused the polling to be
forcibly terminated.
Fixes: 31d2f803c19c ("firmware: arm_scmi: Add sync_cmds_completed_on_ret transport flag")
Reported-by: Huangjie <huangjie1663(a)phytium.com.cn>
Closes: https://lore.kernel.org/arm-scmi/20250123083323.2363749-1-jackhuang021@gmai…
Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com>
Cc: stable(a)vger.kernel.org # 5.18.x
Message-Id: <20250310175800.1444293-1-cristian.marussi(a)arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla(a)arm.com>
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 1c75a4c9c371..0390d5ff195e 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -1248,7 +1248,8 @@ static void xfer_put(const struct scmi_protocol_handle *ph,
}
static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
- struct scmi_xfer *xfer, ktime_t stop)
+ struct scmi_xfer *xfer, ktime_t stop,
+ bool *ooo)
{
struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
@@ -1257,7 +1258,7 @@ static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
* in case of out-of-order receptions of delayed responses
*/
return info->desc->ops->poll_done(cinfo, xfer) ||
- try_wait_for_completion(&xfer->done) ||
+ (*ooo = try_wait_for_completion(&xfer->done)) ||
ktime_after(ktime_get(), stop);
}
@@ -1274,15 +1275,17 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
* itself to support synchronous commands replies.
*/
if (!desc->sync_cmds_completed_on_ret) {
+ bool ooo = false;
+
/*
* Poll on xfer using transport provided .poll_done();
* assumes no completion interrupt was available.
*/
ktime_t stop = ktime_add_ms(ktime_get(), timeout_ms);
- spin_until_cond(scmi_xfer_done_no_timeout(cinfo,
- xfer, stop));
- if (ktime_after(ktime_get(), stop)) {
+ spin_until_cond(scmi_xfer_done_no_timeout(cinfo, xfer,
+ stop, &ooo));
+ if (!ooo && !info->desc->ops->poll_done(cinfo, xfer)) {
dev_err(dev,
"timed out in resp(caller: %pS) - polling\n",
(void *)_RET_IP_);
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012617-overlap-reborn-e124@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
dc7eb8755797 ("arm64/sme: Always exit sme_alloc() early with existing storage")
5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
ce514000da4f ("arm64/sme: Rename za_state to sme_state")
1192b93ba352 ("arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu()")
deeb8f9a80fd ("arm64/fpsimd: Have KVM explicitly say which FP registers to save")
baa8515281b3 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE")
93ae6b01bafe ("KVM: arm64: Discard any SVE state when entering KVM guests")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie(a)kernel.org>
Date: Mon, 15 Jan 2024 20:15:46 +0000
Subject: [PATCH] arm64/sme: Always exit sme_alloc() early with existing
storage
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Cc: <stable(a)vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel…
Signed-off-by: Will Deacon <will(a)kernel.org>
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 0983be2b1b61..a5dc6f764195 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -1217,8 +1217,10 @@ void fpsimd_release_task(struct task_struct *dead_task)
*/
void sme_alloc(struct task_struct *task, bool flush)
{
- if (task->thread.sme_state && flush) {
- memset(task->thread.sme_state, 0, sme_state_size(task));
+ if (task->thread.sme_state) {
+ if (flush)
+ memset(task->thread.sme_state, 0,
+ sme_state_size(task));
return;
}
From: Liu Jian <liujian56(a)huawei.com>
[ Upstream commit 3f23f96528e8fcf8619895c4c916c52653892ec1 ]
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
<IRQ>
dump_stack_lvl+0x68/0xa0
print_address_description.constprop.0+0x2c/0x3d0
print_report+0xb4/0x270
kasan_report+0xbd/0xf0
tcp_write_timer_handler+0x156/0x3e0
tcp_write_timer+0x66/0x170
call_timer_fn+0xfb/0x1d0
__run_timers+0x3f8/0x480
run_timer_softirq+0x9b/0x100
handle_softirqs+0x153/0x390
__irq_exit_rcu+0x103/0x120
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90
90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc
cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242
RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d
R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000
R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0
default_idle_call+0x6b/0xa0
cpuidle_idle_call+0x1af/0x1f0
do_idle+0xbc/0x130
cpu_startup_entry+0x33/0x40
rest_init+0x11f/0x210
start_kernel+0x39a/0x420
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x97/0xa0
common_startup_64+0x13e/0x141
</TASK>
Allocated by task 595:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x87/0x90
kmem_cache_alloc_noprof+0x12b/0x3f0
copy_net_ns+0x94/0x380
create_new_namespaces+0x24c/0x500
unshare_nsproxy_namespaces+0x75/0xf0
ksys_unshare+0x24e/0x4f0
__x64_sys_unshare+0x1f/0x30
do_syscall_64+0x70/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 100:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x54/0x70
kmem_cache_free+0x156/0x5d0
cleanup_net+0x5d3/0x670
process_one_work+0x776/0xa90
worker_thread+0x2e2/0x560
kthread+0x1a8/0x1f0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Reproduction script:
mkdir -p /mnt/nfsshare
mkdir -p /mnt/nfs/netns_1
mkfs.ext4 /dev/sdb
mount /dev/sdb /mnt/nfsshare
systemctl restart nfs-server
chmod 777 /mnt/nfsshare
exportfs -i -o rw,no_root_squash *:/mnt/nfsshare
ip netns add netns_1
ip link add name veth_1_peer type veth peer veth_1
ifconfig veth_1_peer 11.11.0.254 up
ip link set veth_1 netns netns_1
ip netns exec netns_1 ifconfig veth_1 11.11.0.1
ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \
--tcp-flags FIN FIN -j DROP
(note: In my environment, a DESTROY_CLIENTID operation is always sent
immediately, breaking the nfs tcp connection.)
ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \
11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1
ip netns del netns_1
The reason here is that the tcp socket in netns_1 (nfs side) has been
shutdown and closed (done in xs_destroy), but the FIN message (with ack)
is discarded, and the nfsd side keeps sending retransmission messages.
As a result, when the tcp sock in netns_1 processes the received message,
it sends the message (FIN message) in the sending queue, and the tcp timer
is re-established. When the network namespace is deleted, the net structure
accessed by tcp's timer handler function causes problems.
To fix this problem, let's hold netns refcnt for the tcp kernel socket as
done in other modules. This is an ugly hack which can easily be backported
to earlier kernels. A proper fix which cleans up the interfaces will
follow, but may not be so easy to backport.
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Liu Jian <liujian56(a)huawei.com>
Acked-by: Jeff Layton <jlayton(a)kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu(a)amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com>
[Routine __netns_tracker_free() is not supported in 6.1 and so using
netns_tracker_free() instead.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn(a)windriver.com>
Signed-off-by: He Zhe <zhe.he(a)windriver.com>
---
Verified the build test
---
net/sunrpc/svcsock.c | 4 ++++
net/sunrpc/xprtsock.c | 7 +++++++
2 files changed, 11 insertions(+)
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 23b4c728de59..654579553edb 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1457,6 +1457,10 @@ static struct svc_xprt *svc_create_socket(struct svc_serv *serv,
newlen = error;
if (protocol == IPPROTO_TCP) {
+ netns_tracker_free(net, &sock->sk->ns_tracker);
+ sock->sk->sk_net_refcnt = 1;
+ get_net_track(net, &sock->sk->ns_tracker, GFP_KERNEL);
+ sock_inuse_add(net, 1);
if ((error = kernel_listen(sock, 64)) < 0)
goto bummer;
}
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index b9dc8e197dde..181474105e4c 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1855,6 +1855,13 @@ static struct socket *xs_create_sock(struct rpc_xprt *xprt,
goto out;
}
+ if (protocol == IPPROTO_TCP) {
+ netns_tracker_free(xprt->xprt_net, &sock->sk->ns_tracker);
+ sock->sk->sk_net_refcnt = 1;
+ get_net_track(xprt->xprt_net, &sock->sk->ns_tracker, GFP_KERNEL);
+ sock_inuse_add(xprt->xprt_net, 1);
+ }
+
filp = sock_alloc_file(sock, O_NONBLOCK, NULL);
if (IS_ERR(filp))
return ERR_CAST(filp);
--
2.34.1
From: Kees Cook <kees(a)kernel.org>
[ Upstream commit 6f9a8ab796c6528d22de3c504c81fce7dde63d8a ]
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu(a)suse.com>
Signed-off-by: Kees Cook <kees(a)kernel.org>
Reviewed-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
fs/btrfs/compression.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 40332ab62f101..65d883da86c60 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -606,7 +606,7 @@ void btrfs_submit_compressed_read(struct btrfs_bio *bbio)
free_extent_map(em);
cb->nr_folios = DIV_ROUND_UP(compressed_len, PAGE_SIZE);
- cb->compressed_folios = kcalloc(cb->nr_folios, sizeof(struct page *), GFP_NOFS);
+ cb->compressed_folios = kcalloc(cb->nr_folios, sizeof(struct folio *), GFP_NOFS);
if (!cb->compressed_folios) {
ret = BLK_STS_RESOURCE;
goto out_free_bio;
--
2.39.5
From: Matthew Brost <matthew.brost(a)intel.com>
Add timeslicing support to GPU SVM which will guarantee the GPU a
minimum execution time on piece of physical memory before migration back
to CPU. Intended to implement strict migration policies which require
memory to be in a certain placement for correct execution.
Required for shared CPU and GPU atomics on certain devices.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable(a)vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost(a)intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com>
---
drivers/gpu/drm/drm_gpusvm.c | 9 +++++++++
include/drm/drm_gpusvm.h | 5 +++++
2 files changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/drm_gpusvm.c b/drivers/gpu/drm/drm_gpusvm.c
index 41f6616bcf76..4b2f32889f00 100644
--- a/drivers/gpu/drm/drm_gpusvm.c
+++ b/drivers/gpu/drm/drm_gpusvm.c
@@ -1783,6 +1783,8 @@ int drm_gpusvm_migrate_to_devmem(struct drm_gpusvm *gpusvm,
goto err_finalize;
/* Upon success bind devmem allocation to range and zdd */
+ devmem_allocation->timeslice_expiration = get_jiffies_64() +
+ msecs_to_jiffies(ctx->timeslice_ms);
zdd->devmem_allocation = devmem_allocation; /* Owns ref */
err_finalize:
@@ -2003,6 +2005,13 @@ static int __drm_gpusvm_migrate_to_ram(struct vm_area_struct *vas,
void *buf;
int i, err = 0;
+ if (page) {
+ zdd = page->zone_device_data;
+ if (time_before64(get_jiffies_64(),
+ zdd->devmem_allocation->timeslice_expiration))
+ return 0;
+ }
+
start = ALIGN_DOWN(fault_addr, size);
end = ALIGN(fault_addr + 1, size);
diff --git a/include/drm/drm_gpusvm.h b/include/drm/drm_gpusvm.h
index 653d48dbe1c1..eaf704d3d05e 100644
--- a/include/drm/drm_gpusvm.h
+++ b/include/drm/drm_gpusvm.h
@@ -89,6 +89,7 @@ struct drm_gpusvm_devmem_ops {
* @ops: Pointer to the operations structure for GPU SVM device memory
* @dpagemap: The struct drm_pagemap of the pages this allocation belongs to.
* @size: Size of device memory allocation
+ * @timeslice_expiration: Timeslice expiration in jiffies
*/
struct drm_gpusvm_devmem {
struct device *dev;
@@ -97,6 +98,7 @@ struct drm_gpusvm_devmem {
const struct drm_gpusvm_devmem_ops *ops;
struct drm_pagemap *dpagemap;
size_t size;
+ u64 timeslice_expiration;
};
/**
@@ -295,6 +297,8 @@ struct drm_gpusvm {
* @check_pages_threshold: Check CPU pages for present if chunk is less than or
* equal to threshold. If not present, reduce chunk
* size.
+ * @timeslice_ms: The timeslice MS which in minimum time a piece of memory
+ * remains with either exclusive GPU or CPU access.
* @in_notifier: entering from a MMU notifier
* @read_only: operating on read-only memory
* @devmem_possible: possible to use device memory
@@ -304,6 +308,7 @@ struct drm_gpusvm {
*/
struct drm_gpusvm_ctx {
unsigned long check_pages_threshold;
+ unsigned long timeslice_ms;
unsigned int in_notifier :1;
unsigned int read_only :1;
unsigned int devmem_possible :1;
--
2.34.1
This commit adds a new flag, devmem_only, to the drm_gpusvm structure. The
purpose of this flag is to ensure that the get_pages function allocates
memory exclusively from the device's memory. If the allocation from
device memory fails, the function will return an -EFAULT error.
Required for shared CPU and GPU atomics on certain devices.
v3:
- s/vram_only/devmem_only/
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable(a)vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost(a)intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com>
Reviewed-by: Matthew Brost <matthew.brost(a)intel.com>
---
drivers/gpu/drm/drm_gpusvm.c | 5 +++++
include/drm/drm_gpusvm.h | 2 ++
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/drm_gpusvm.c b/drivers/gpu/drm/drm_gpusvm.c
index de424e670995..a58d03e6cac2 100644
--- a/drivers/gpu/drm/drm_gpusvm.c
+++ b/drivers/gpu/drm/drm_gpusvm.c
@@ -1454,6 +1454,11 @@ int drm_gpusvm_range_get_pages(struct drm_gpusvm *gpusvm,
goto err_unmap;
}
+ if (ctx->devmem_only) {
+ err = -EFAULT;
+ goto err_unmap;
+ }
+
addr = dma_map_page(gpusvm->drm->dev,
page, 0,
PAGE_SIZE << order,
diff --git a/include/drm/drm_gpusvm.h b/include/drm/drm_gpusvm.h
index df120b4d1f83..9fd25fc880a4 100644
--- a/include/drm/drm_gpusvm.h
+++ b/include/drm/drm_gpusvm.h
@@ -286,6 +286,7 @@ struct drm_gpusvm {
* @in_notifier: entering from a MMU notifier
* @read_only: operating on read-only memory
* @devmem_possible: possible to use device memory
+ * @devmem_only: use only device memory
*
* Context that is DRM GPUSVM is operating in (i.e. user arguments).
*/
@@ -294,6 +295,7 @@ struct drm_gpusvm_ctx {
unsigned int in_notifier :1;
unsigned int read_only :1;
unsigned int devmem_possible :1;
+ unsigned int devmem_only :1;
};
int drm_gpusvm_init(struct drm_gpusvm *gpusvm,
--
2.34.1
#regzbot introduced: v6.12..v6.13
I use RX6600 on arm64 Orion o6 board and it seems that amdgpu is broken on recent kernels, fails on boot:
[drm] amdgpu: 7886M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
SError Interrupt on CPU11, code 0x00000000be000011 -- SError
CPU: 11 UID: 0 PID: 255 Comm: (udev-worker) Tainted: G S 6.15.0-rc2+ #1 VOLUNTARY
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Radxa Computer (Shenzhen) Co., Ltd. Radxa Orion O6/Radxa Orion O6, BIOS 1.0 Jan 1 1980
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : amdgpu_device_rreg+0x60/0xe4 [amdgpu]
lr : hdp_v5_0_flush_hdp+0x6c/0x80 [amdgpu]
sp : ffffffc08321b490
x29: ffffffc08321b490 x28: ffffff80b8b80000 x27: ffffff80b8bd0178
x26: ffffff80b8b8fe88 x25: 0000000000000001 x24: ffffff8081647000
x23: ffffffc079d6e000 x22: ffffff80b8bd5000 x21: 000000000007f000
x20: 000000000001fc00 x19: 00000000ffffffff x18: 00000000000015fc
x17: 00000000000015fc x16: 00000000000015cf x15: 00000000000015ce
x14: 00000000000015d0 x13: 00000000000015d1 x12: 00000000000015d2
x11: 00000000000015d3 x10: 000000000000ec00 x9 : 00000000000015fd
x8 : 00000000000015fd x7 : 0000000000001689 x6 : 0000000000555401
x5 : 0000000000000001 x4 : 0000000000100000 x3 : 0000000000100000
x2 : 0000000000000000 x1 : 000000000007f000 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 11 UID: 0 PID: 255 Comm: (udev-worker) Tainted: G S 6.15.0-rc2+ #1 VOLUNTARY
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Radxa Computer (Shenzhen) Co., Ltd. Radxa Orion O6/Radxa Orion O6, BIOS 1.0 Jan 1 1980
Call trace:
show_stack+0x2c/0x84 (C)
dump_stack_lvl+0x60/0x80
dump_stack+0x18/0x24
panic+0x148/0x330
add_taint+0x0/0xbc
arm64_serror_panic+0x64/0x7c
do_serror+0x28/0x68
el1h_64_error_handler+0x30/0x48
el1h_64_error+0x6c/0x70
amdgpu_device_rreg+0x60/0xe4 [amdgpu] (P)
hdp_v5_0_flush_hdp+0x6c/0x80 [amdgpu]
gmc_v10_0_hw_init+0xec/0x1fc [amdgpu]
amdgpu_device_init+0x19f8/0x2480 [amdgpu]
amdgpu_driver_load_kms+0x20/0xb0 [amdgpu]
amdgpu_pci_probe+0x1b8/0x5d4 [amdgpu]
pci_device_probe+0xbc/0x1a8
really_probe+0xc0/0x39c
__driver_probe_device+0x7c/0x14c
driver_probe_device+0x3c/0x120
__driver_attach+0xc4/0x200
bus_for_each_dev+0x68/0xb4
driver_attach+0x24/0x30
bus_add_driver+0x110/0x240
driver_register+0x68/0x124
__pci_register_driver+0x44/0x50
amdgpu_init+0x84/0xf94 [amdgpu]
do_one_initcall+0x60/0x1e0
do_init_module+0x54/0x200
load_module+0x18f8/0x1e68
init_module_from_file+0x74/0xa0
__arm64_sys_finit_module+0x1e0/0x3f0
invoke_syscall+0x64/0xe4
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd0
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x1000,000000e0,f169a650,9b7ff667
Memory Limit: none
---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
(bios version seems to be 45 years old but that is the state of the board
when I received it)
Also saw this crash with RX6700. Old radeons like HD5450 and nvidia gt1030
work fine on that board.
A little bit of testing showed that it was introduced between 6.12 and 6.13.
Also it seems that changes were taken by some distro kernels already and
different iso images I tried failed to boot before I bumped into some iso
with kernel 6.8 that worked just fine.
The only change related to hdp_v5_0_flush_hdp() was
cf424020e040 drm/amdgpu/hdp5.0: do a posting read when flushing HDP
Reverting that commit ^^ did help and resolved that problem. Before sending
revert as-is I was interested to know if there supposed to be a proper fix
for this or maybe someone is interested to debug this or have any suggestions.
In theory I also need to confirm that exactly that change introduced the
regression.
Thanks,
Alexey
Hi All,
Chages since v5:
- full error message included into commit description
Chages since v4:
- unused pages leak is avoided
Chages since v3:
- pfn_to_virt() changed to page_to_virt() due to compile error
Chages since v2:
- page allocation moved out of the atomic context
Chages since v1:
- Fixes: and -stable tags added to the patch description
Thanks!
Alexander Gordeev (1):
kasan: Avoid sleepable page allocation from atomic context
mm/kasan/shadow.c | 77 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 63 insertions(+), 14 deletions(-)
--
2.45.2
commit 968f19c5b1b7d5595423b0ac0020cc18dfed8cb5 upstream.
[BUG]
It is a long known bug that VM image on btrfs can lead to data csum
mismatch, if the qemu is using direct-io for the image (this is commonly
known as cache mode 'none').
[CAUSE]
Inside the VM, if the fs is EXT4 or XFS, or even NTFS from Windows, the
fs is allowed to dirty/modify the folio even if the folio is under
writeback (as long as the address space doesn't have AS_STABLE_WRITES
flag inherited from the block device).
This is a valid optimization to improve the concurrency, and since these
filesystems have no extra checksum on data, the content change is not a
problem at all.
Bu the final write into the image file is handled by btrfs, which needs
the content not to be modified during writeback, or the checksum will
not match the data (checksum is calculated before submitting the bio).
So EXT4/XFS/NTRFS assume they can modify the folio under writeback, but
btrfs requires no modification, this leads to the false csum mismatch.
This is only a controlled example, there are even cases where
multi-thread programs can submit a direct IO write, then another thread
modifies the direct IO buffer for whatever reason.
For such cases, btrfs has no sane way to detect such cases and leads to
false data csum mismatch.
[FIX]
I have considered the following ideas to solve the problem:
- Make direct IO to always skip data checksum
This not only requires a new incompatible flag, as it breaks the
current per-inode NODATASUM flag.
But also requires extra handling for no csum found cases.
And this also reduces our checksum protection.
- Let hardware handle all the checksum
AKA, just nodatasum mount option.
That requires trust for hardware (which is not that trustful in a lot
of cases), and it's not generic at all.
- Always fallback to buffered write if the inode requires checksum
This was suggested by Christoph, and is the solution utilized by this
patch.
The cost is obvious, the extra buffer copying into page cache, thus it
reduces the performance.
But at least it's still user configurable, if the end user still wants
the zero-copy performance, just set NODATASUM flag for the inode
(which is a common practice for VM images on btrfs).
Since we cannot trust user space programs to keep the buffer
consistent during direct IO, we have no choice but always falling back
to buffered IO. At least by this, we avoid the more deadly false data
checksum mismatch error.
CC: stable(a)vger.kernel.org # 6.12+
Suggested-by: Christoph Hellwig <hch(a)infradead.org>
Reviewed-by: Filipe Manana <fdmanana(a)suse.com>
Signed-off-by: Qu Wenruo <wqu(a)suse.com>
Reviewed-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: David Sterba <dsterba(a)suse.com>
---
fs/btrfs/direct-io.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/fs/btrfs/direct-io.c b/fs/btrfs/direct-io.c
index 8567af46e16f..eacbb74bf6bc 100644
--- a/fs/btrfs/direct-io.c
+++ b/fs/btrfs/direct-io.c
@@ -855,6 +855,22 @@ ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
btrfs_inode_unlock(BTRFS_I(inode), ilock_flags);
goto buffered;
}
+ /*
+ * We can't control the folios being passed in, applications can write
+ * to them while a direct IO write is in progress. This means the
+ * content might change after we calculated the data checksum.
+ * Therefore we can end up storing a checksum that doesn't match the
+ * persisted data.
+ *
+ * To be extra safe and avoid false data checksum mismatch, if the
+ * inode requires data checksum, just fallback to buffered IO.
+ * For buffered IO we have full control of page cache and can ensure
+ * no one is modifying the content during writeback.
+ */
+ if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) {
+ btrfs_inode_unlock(BTRFS_I(inode), ilock_flags);
+ goto buffered;
+ }
/*
* The iov_iter can be mapped to the same file range we are writing to.
--
2.49.0
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 687b2bae0efff9b25e071737d6af5004e6e35af5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051212-antirust-outshoot-07f7@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 687b2bae0efff9b25e071737d6af5004e6e35af5 Mon Sep 17 00:00:00 2001
From: Jens Axboe <axboe(a)kernel.dk>
Date: Wed, 7 May 2025 07:34:24 -0600
Subject: [PATCH] io_uring: ensure deferred completions are flushed for
multishot
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable(a)vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer(a)apple.com>
Reported-by: Christian Mazakas <christian.mazakas(a)gmail.com>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 769814d71153..541e65a1eebf 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -848,6 +848,14 @@ bool io_req_post_cqe(struct io_kiocb *req, s32 res, u32 cflags)
struct io_ring_ctx *ctx = req->ctx;
bool posted;
+ /*
+ * If multishot has already posted deferred completions, ensure that
+ * those are flushed first before posting this one. If not, CQEs
+ * could get reordered.
+ */
+ if (!wq_list_empty(&ctx->submit_state.compl_reqs))
+ __io_submit_flush_completions(ctx);
+
lockdep_assert(!io_wq_current_is_worker());
lockdep_assert_held(&ctx->uring_lock);
Hi stable(a)vger.kernel.org,
Could you please apply:
1. Commit a7208610761ae ("Bluetooth: btmtk: Remove resetting mt7921
before downloading the fw") to v6.12.x (it's already in
v6.14).
2. Commit 33634e2ab7c6 ("Bluetooth: btmtk: Remove the resetting step
before downloading the fw") to v6.12.x and v6.14.x.
These fixes address an issue with some audio interfaces failing to
initialise during boot on kernels 6.11+. As noted in my original
analysis below, the MediaTek Bluetooth controller reset increases the
device setup time from ~200ms to ~20s and can interfere with other USB
devices on the bus.
Thanks,
Geoffrey.
On Fri, Mar 28, 2025 at 08:44:49AM +1030, Geoffrey D. Bennett wrote:
> Hi all,
>
> Sorry, I see that an identical patch has already been applied to
> bluetooth-next
> https://lore.kernel.org/linux-bluetooth/20250315022730.11071-1-hao.qin@medi…
>
> While I'm glad the issue is being addressed, my original patch
> https://lore.kernel.org/linux-bluetooth/Z8ybV04CVUfVAykH@m.b4.vu/
> contained useful context and tags that didn't make it into the final
> commit.
>
> For getting this fix into current kernel releases 6.12/6.13/6.14, I
> think the patch needs the "Cc: stable(a)vger.kernel.org" tag that was in
> my original submission but missing from Hao's. Since this is causing
> significant issues for users on kernels 6.11+ (audio interfaces
> failing to work), it's important this gets backported.
>
> Hao, is this something you can do? I think the instructions at
> https://www.kernel.org/doc/html/v6.14/process/stable-kernel-rules.html#opti…
> need to be followed, but I've not done this before.
>
> Thanks,
> Geoffrey.
>
> On Fri, Mar 28, 2025 at 07:22:06AM +1030, Geoffrey D. Bennett wrote:
> > This reverts commit ccfc8948d7e4d93cab341a99774b24586717d89a.
> >
> > The MediaTek Bluetooth controller reset that was added increases the
> > Bluetooth device setup time from ~200ms to ~20s and interferes with
> > other devices on the bus.
> >
> > Three users (with Focusrite Scarlett 2nd Gen 6i6 and 3rd Gen Solo and
> > 4i4 audio interfaces) reported that since 6.11 (which added this
> > commit) their audio interface fails to initialise if connected during
> > boot. Two of the users confirmed they have an MT7922.
> >
> > Errors like this are observed in dmesg for the audio interface:
> >
> > usb 3-4: parse_audio_format_rates_v2v3(): unable to find clock source (clock -110)
> > usb 3-4: uac_clock_source_is_valid(): cannot get clock validity for id 41
> > usb 3-4: clock source 41 is not valid, cannot use
> >
> > The problem only occurs when both devices and kernel modules are
> > present and loaded during system boot, so it can be worked around by
> > connecting the audio interface after booting.
> >
> > Fixes: ccfc8948d7e4 ("Bluetooth: btusb: mediatek: reset the controller before downloading the fw")
> > Closes: https://github.com/geoffreybennett/linux-fcp/issues/24
> > Bisected-by: Benedikt Ziemons <ben(a)rs485.network>
> > Tested-by: Benedikt Ziemons <ben(a)rs485.network>
> > Cc: stable(a)vger.kernel.org
> > Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu>
> > ---
> > Changelog:
> >
> > v1 -> v2:
> >
> > - Updated commit message with additional information.
> > - No change to this patch's diff.
> > - Dropped alternate patch that only reverted for 0x7922.
> > - Chris, Sean, Hao agreed to reverting the change:
> > https://lore.kernel.org/linux-bluetooth/2025031352-octopus-quadrant-f7ca@gr…
> >
> > drivers/bluetooth/btmtk.c | 10 ----------
> > 1 file changed, 10 deletions(-)
> >
> > diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> > index 68846c5bd4f7..4390fd571dbd 100644
> > --- a/drivers/bluetooth/btmtk.c
> > +++ b/drivers/bluetooth/btmtk.c
> > @@ -1330,13 +1330,6 @@ int btmtk_usb_setup(struct hci_dev *hdev)
> > break;
> > case 0x7922:
> > case 0x7925:
> > - /* Reset the device to ensure it's in the initial state before
> > - * downloading the firmware to ensure.
> > - */
> > -
> > - if (!test_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags))
> > - btmtk_usb_subsys_reset(hdev, dev_id);
> > - fallthrough;
> > case 0x7961:
> > btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
> > fw_version, fw_flavor);
> > @@ -1345,12 +1338,9 @@ int btmtk_usb_setup(struct hci_dev *hdev)
> > btmtk_usb_hci_wmt_sync);
> > if (err < 0) {
> > bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
> > - clear_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags);
> > return err;
> > }
> >
> > - set_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags);
> > -
> > /* It's Device EndPoint Reset Option Register */
> > err = btmtk_usb_uhw_reg_write(hdev, MTK_EP_RST_OPT,
> > MTK_EP_RST_IN_OUT_OPT);
> > --
> > 2.45.0
> >
> >
> >
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 687b2bae0efff9b25e071737d6af5004e6e35af5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025051212-safeness-barista-b429@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 687b2bae0efff9b25e071737d6af5004e6e35af5 Mon Sep 17 00:00:00 2001
From: Jens Axboe <axboe(a)kernel.dk>
Date: Wed, 7 May 2025 07:34:24 -0600
Subject: [PATCH] io_uring: ensure deferred completions are flushed for
multishot
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable(a)vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer(a)apple.com>
Reported-by: Christian Mazakas <christian.mazakas(a)gmail.com>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 769814d71153..541e65a1eebf 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -848,6 +848,14 @@ bool io_req_post_cqe(struct io_kiocb *req, s32 res, u32 cflags)
struct io_ring_ctx *ctx = req->ctx;
bool posted;
+ /*
+ * If multishot has already posted deferred completions, ensure that
+ * those are flushed first before posting this one. If not, CQEs
+ * could get reordered.
+ */
+ if (!wq_list_empty(&ctx->submit_state.compl_reqs))
+ __io_submit_flush_completions(ctx);
+
lockdep_assert(!io_wq_current_is_worker());
lockdep_assert_held(&ctx->uring_lock);