- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "qed: Fix interrupt flags on Rx LL2" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qed: Fix interrupt flags on Rx LL2 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qed-fix-interrupt-flags-on-rx-ll2.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Ram Amrani <Ram.Amrani(a)cavium.com> Date: Tue, 14 Mar 2017 15:26:02 +0200 Subject: qed: Fix interrupt flags on Rx LL2 From: Ram Amrani <Ram.Amrani(a)cavium.com> [ Upstream commit 1df2adedcce17ad4a39fba74f0e2b611f797fe10 ] Before iterating over the the LL2 Rx ring, the ring's spinlock is taken via spin_lock_irqsave(). The actual processing of the packet [including handling by the protocol driver] is done without said lock, so qed releases the spinlock and re-claims it afterwards. Problem is that the final spin_lock_irqrestore() at the end of the iteration uses the original flags saved from the initial irqsave() instead of the flags from the most recent irqsave(). So it's possible that the interrupt status would be incorrect at the end of the processing. Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support"); CC: Ram Amrani <Ram.Amrani(a)cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -443,7 +443,7 @@ qed_ll2_rxq_completion_gsi(struct qed_hw static int qed_ll2_rxq_completion_reg(struct qed_hwfn *p_hwfn, struct qed_ll2_info *p_ll2_conn, union core_rx_cqe_union *p_cqe, - unsigned long lock_flags, + unsigned long *p_lock_flags, bool b_last_cqe) { struct qed_ll2_rx_queue *p_rx = &p_ll2_conn->rx_queue; @@ -464,10 +464,10 @@ static int qed_ll2_rxq_completion_reg(st "Mismatch between active_descq and the LL2 Rx chain\n"); list_add_tail(&p_pkt->list_entry, &p_rx->free_descq); - spin_unlock_irqrestore(&p_rx->lock, lock_flags); + spin_unlock_irqrestore(&p_rx->lock, *p_lock_flags); qed_ll2b_complete_rx_packet(p_hwfn, p_ll2_conn->my_id, p_pkt, &p_cqe->rx_cqe_fp, b_last_cqe); - spin_lock_irqsave(&p_rx->lock, lock_flags); + spin_lock_irqsave(&p_rx->lock, *p_lock_flags); return 0; } @@ -507,7 +507,8 @@ static int qed_ll2_rxq_completion(struct break; case CORE_RX_CQE_TYPE_REGULAR: rc = qed_ll2_rxq_completion_reg(p_hwfn, p_ll2_conn, - cqe, flags, b_last_cqe); + cqe, &flags, + b_last_cqe); break; default: rc = -EIO; Patches currently in stable-queue which might be from Ram.Amrani(a)cavium.com are queue-4.9/qed-fix-interrupt-flags-on-rx-ll2.patch queue-4.9/qed-align-cids-according-to-dorq-requirement.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "qed: Align CIDs according to DORQ requirement" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qed: Align CIDs according to DORQ requirement to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qed-align-cids-according-to-dorq-requirement.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Ram Amrani <Ram.Amrani(a)cavium.com> Date: Tue, 14 Mar 2017 15:25:58 +0200 Subject: qed: Align CIDs according to DORQ requirement From: Ram Amrani <Ram.Amrani(a)cavium.com> [ Upstream commit f3e48119b97f56fb09310c95d49da122a27003d7 ] The Doorbell HW block can be configured at a granularity of 16 x CIDs, so we need to make sure that the actual number of CIDs configured would be a multiplication of 16. Today, when RoCE is enabled - given that the number is unaligned, doorbelling the higher CIDs would fail to reach the firmware and would eventually timeout. Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols") Signed-off-by: Ram Amrani <Ram.Amrani(a)cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -373,8 +373,9 @@ static void qed_cxt_set_proto_cid_count( u32 page_sz = p_mgr->clients[ILT_CLI_CDUC].p_size.val; u32 cxt_size = CONN_CXT_SIZE(p_hwfn); u32 elems_per_page = ILT_PAGE_IN_BYTES(page_sz) / cxt_size; + u32 align = elems_per_page * DQ_RANGE_ALIGN; - p_conn->cid_count = roundup(p_conn->cid_count, elems_per_page); + p_conn->cid_count = roundup(p_conn->cid_count, align); } } Patches currently in stable-queue which might be from Ram.Amrani(a)cavium.com are queue-4.9/qed-fix-interrupt-flags-on-rx-ll2.patch queue-4.9/qed-align-cids-according-to-dorq-requirement.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ppp: Destroy the mutex when cleanup" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ppp: Destroy the mutex when cleanup to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ppp-destroy-the-mutex-when-cleanup.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Gao Feng <gfree.wind(a)vip.163.com> Date: Tue, 31 Oct 2017 18:25:37 +0800 Subject: ppp: Destroy the mutex when cleanup From: Gao Feng <gfree.wind(a)vip.163.com> [ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ] The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the good readbility, it's better to invoke it in exit func when the init func invokes mutex_init. Signed-off-by: Gao Feng <gfree.wind(a)vip.163.com> Acked-by: Guillaume Nault <g.nault(a)alphalink.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ppp/ppp_generic.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -958,6 +958,7 @@ static __net_exit void ppp_exit_net(stru unregister_netdevice_many(&list); rtnl_unlock(); + mutex_destroy(&pn->all_ppp_mutex); idr_destroy(&pn->units_idr); } Patches currently in stable-queue which might be from gfree.wind(a)vip.163.com are queue-4.9/ppp-destroy-the-mutex-when-cleanup.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Shriya <shriyak(a)linux.vnet.ibm.com> Date: Fri, 13 Oct 2017 10:06:41 +0530 Subject: powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo From: Shriya <shriyak(a)linux.vnet.ibm.com> [ Upstream commit cd77b5ce208c153260ed7882d8910f2395bfaabd ] The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which returns the last frequency requested by the kernel, but may not reflect the actual frequency the processor is running at. This patch makes a call to cpufreq_get() instead which returns the current frequency reported by the hardware. Fixes: fb5153d05a7d ("powerpc: powernv: Implement ppc_md.get_proc_freq()") Signed-off-by: Shriya <shriyak(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/powernv/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -289,7 +289,7 @@ static unsigned long pnv_get_proc_freq(u { unsigned long ret_freq; - ret_freq = cpufreq_quick_get(cpu) * 1000ul; + ret_freq = cpufreq_get(cpu) * 1000ul; /* * If the backend cpufreq driver does not exist, Patches currently in stable-queue which might be from shriyak(a)linux.vnet.ibm.com are queue-4.9/powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/perf/hv-24x7: Fix incorrect comparison in memord" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/perf/hv-24x7: Fix incorrect comparison in memord to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-perf-hv-24x7-fix-incorrect-comparison-in-memord.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Mon, 9 Oct 2017 21:52:44 +1100 Subject: powerpc/perf/hv-24x7: Fix incorrect comparison in memord From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit 05c14c03138532a3cb2aa29c2960445c8753343b ] In the hv-24x7 code there is a function memord() which tries to implement a sort function return -1, 0, 1. However one of the conditions is incorrect, such that it can never be true, because we will have already returned. I don't believe there is a bug in practice though, because the comparisons are an optimisation prior to calling memcmp(). Fix it by swapping the second comparision, so it can be true. Reported-by: David Binderman <dcb314(a)hotmail.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/perf/hv-24x7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -516,7 +516,7 @@ static int memord(const void *d1, size_t { if (s1 < s2) return 1; - if (s2 > s1) + if (s1 > s2) return -1; return memcmp(d1, d2, s1); Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/powerpc-perf-hv-24x7-fix-incorrect-comparison-in-memord.patch queue-4.9/powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch queue-4.9/powerpc-ipic-fix-status-get-and-status-clear.patch queue-4.9/powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/opal: Fix EBUSY bug in acquiring tokens" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/opal: Fix EBUSY bug in acquiring tokens to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: "William A. Kennington III" <wak(a)google.com> Date: Fri, 22 Sep 2017 16:58:00 -0700 Subject: powerpc/opal: Fix EBUSY bug in acquiring tokens From: "William A. Kennington III" <wak(a)google.com> [ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ] The current code checks the completion map to look for the first token that is complete. In some cases, a completion can come in but the token can still be on lease to the caller processing the completion. If this completed but unreleased token is the first token found in the bitmap by another tasks trying to acquire a token, then the __test_and_set_bit call will fail since the token will still be on lease. The acquisition will then fail with an EBUSY. This patch reorganizes the acquisition code to look at the opal_async_token_map for an unleased token. If the token has no lease it must have no outstanding completions so we should never see an EBUSY, unless we have leased out too many tokens. Since opal_async_get_token_inrerruptible is protected by a semaphore, we will practically never see EBUSY anymore. Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion") Signed-off-by: William A. Kennington III <wak(a)google.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/powernv/opal-async.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/powerpc/platforms/powernv/opal-async.c +++ b/arch/powerpc/platforms/powernv/opal-async.c @@ -39,18 +39,18 @@ int __opal_async_get_token(void) int token; spin_lock_irqsave(&opal_async_comp_lock, flags); - token = find_first_bit(opal_async_complete_map, opal_max_async_tokens); + token = find_first_zero_bit(opal_async_token_map, opal_max_async_tokens); if (token >= opal_max_async_tokens) { token = -EBUSY; goto out; } - if (__test_and_set_bit(token, opal_async_token_map)) { + if (!__test_and_clear_bit(token, opal_async_complete_map)) { token = -EBUSY; goto out; } - __clear_bit(token, opal_async_complete_map); + __set_bit(token, opal_async_token_map); out: spin_unlock_irqrestore(&opal_async_comp_lock, flags); Patches currently in stable-queue which might be from wak(a)google.com are queue-4.9/powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/ipic: Fix status get and status clear" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/ipic: Fix status get and status clear to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-ipic-fix-status-get-and-status-clear.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Christophe Leroy <christophe.leroy(a)c-s.fr> Date: Wed, 18 Oct 2017 11:16:47 +0200 Subject: powerpc/ipic: Fix status get and status clear From: Christophe Leroy <christophe.leroy(a)c-s.fr> [ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ] IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR which is the mask register. Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/sysdev/ipic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -845,12 +845,12 @@ void ipic_disable_mcp(enum ipic_mcp_irq u32 ipic_get_mcp_status(void) { - return ipic_read(primary_ipic->regs, IPIC_SERMR); + return ipic_read(primary_ipic->regs, IPIC_SERSR); } void ipic_clear_mcp_status(u32 mask) { - ipic_write(primary_ipic->regs, IPIC_SERMR, mask); + ipic_write(primary_ipic->regs, IPIC_SERSR, mask); } /* Return an interrupt vector or 0 if no interrupt is pending. */ Patches currently in stable-queue which might be from christophe.leroy(a)c-s.fr are queue-4.9/powerpc-ipic-fix-status-get-and-status-clear.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-sony-laptop-fix-error-handling-in-sony_nc_setup_rfkill.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Wed, 1 Nov 2017 18:42:45 +0100 Subject: platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() From: Markus Elfring <elfring(a)users.sourceforge.net> [ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ] Source code review for a specific software refactoring showed the need for another correction because the error code "-1" was returned so far if a call of the function "sony_call_snc_handle" failed here. Thus assign the return value from these two function calls also to the variable "err" and provide it in case of a failure. Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw") Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Link: https://lkml.org/lkml/2017/10/31/463 Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg(a)mail.gmail.com> Signed-off-by: Markus Elfring <elfring(a)users.sourceforge.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/sony-laptop.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1660,17 +1660,19 @@ static int sony_nc_setup_rfkill(struct a if (!rfk) return -ENOMEM; - if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) { + err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result); + if (err < 0) { rfkill_destroy(rfk); - return -1; + return err; } hwblock = !(result & 0x1); - if (sony_call_snc_handle(sony_rfkill_handle, - sony_rfkill_address[nc_type], - &result) < 0) { + err = sony_call_snc_handle(sony_rfkill_handle, + sony_rfkill_address[nc_type], + &result); + if (err < 0) { rfkill_destroy(rfk); - return -1; + return err; } swblock = !(result & 0x2); Patches currently in stable-queue which might be from elfring(a)users.sourceforge.net are queue-4.9/platform-x86-sony-laptop-fix-error-handling-in-sony_nc_setup_rfkill.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: intel_punit_ipc: Fix resource ioremap warning" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: intel_punit_ipc: Fix resource ioremap warning to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-intel_punit_ipc-fix-resource-ioremap-warning.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> Date: Sun, 29 Oct 2017 02:49:54 -0700 Subject: platform/x86: intel_punit_ipc: Fix resource ioremap warning From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> [ Upstream commit 6cc8cbbc8868033f279b63e98b26b75eaa0006ab ] For PUNIT device, ISPDRIVER_IPC and GTDDRIVER_IPC resources are not mandatory. So when PMC IPC driver creates a PUNIT device, if these resources are not available then it creates dummy resource entries for these missing resources. But during PUNIT device probe, doing ioremap on these dummy resources generates following warning messages. intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] This patch fixes this issue by adding extra check for resource size before performing ioremap operation. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/intel_punit_ipc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -252,28 +252,28 @@ static int intel_punit_get_bars(struct p * - GTDRIVER_IPC BASE_IFACE */ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; } res = platform_get_resource(pdev, IORESOURCE_MEM, 3); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; } res = platform_get_resource(pdev, IORESOURCE_MEM, 4); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; } res = platform_get_resource(pdev, IORESOURCE_MEM, 5); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; Patches currently in stable-queue which might be from sathyanarayanan.kuppuswamy(a)linux.intel.com are queue-4.9/platform-x86-intel_punit_ipc-fix-resource-ioremap-warning.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: hp_accel: Add quirk for HP ProBook 440 G4" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: hp_accel: Add quirk for HP ProBook 440 G4 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-hp_accel-add-quirk-for-hp-probook-440-g4.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Osama Khan <osama.khan(a)ericsson.com> Date: Sat, 21 Oct 2017 10:42:21 +0000 Subject: platform/x86: hp_accel: Add quirk for HP ProBook 440 G4 From: Osama Khan <osama.khan(a)ericsson.com> [ Upstream commit 163ca80013aafb6dc9cb295de3db7aeab9ab43f8 ] Added support for HP ProBook 440 G4 laptops by including the accelerometer orientation quirk for that device. Testing was performed based on the axis orientation guidelines here: https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d which states "If the left side is elevated, X increases (becomes positive)". When tested, on lifting the left edge, x values became increasingly negative thus indicating an inverted x-axis on the installed lis3lv02d chip. This was compensated by adding an entry for this device in hp_accel.c specifying the quirk as x_inverted. The patch was tested on a ProBook 440 G4 device and x-axis as well as y and z-axis values are now generated as per spec. Signed-off-by: Osama Khan <osama.khan(a)ericsson.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/hp_accel.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left), AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd), + AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted), AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left), AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted), AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap), Patches currently in stable-queue which might be from osama.khan(a)ericsson.com are queue-4.9/platform-x86-hp_accel-add-quirk-for-hp-probook-440-g4.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "pinctrl: adi2: Fix Kconfig build problem" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pinctrl: adi2: Fix Kconfig build problem to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pinctrl-adi2-fix-kconfig-build-problem.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Linus Walleij <linus.walleij(a)linaro.org> Date: Wed, 11 Oct 2017 11:57:15 +0200 Subject: pinctrl: adi2: Fix Kconfig build problem From: Linus Walleij <linus.walleij(a)linaro.org> [ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ] The build robot is complaining on Blackfin: drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup': >> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing pointer to incomplete type 'struct gpio_port_t' writew(readw(&regs->port_fer) & ~BIT(offset), ^~ drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq': >> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing pointer to incomplete type 'struct bfin_pint_regs' if (readl(&regs->invert_set) & pintbit) ^~ It seems the driver need to include <asm/gpio.h> and <asm/irq.h> to compile. The Blackfin architecture was re-defining the Kconfig PINCTRL symbol which is not OK, so replaced this with PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2 just like most arches do. Further, the old GPIO driver symbol GPIO_ADI was possible to select at the same time as selecting PINCTRL. This was not working because the arch-local <asm/gpio.h> header contains an explicit #ifndef PINCTRL clause making compilation break if you combine them. The same is true for DEBUG_MMRS. Make sure the ADI2 pinctrl driver is not selected at the same time as the old GPIO implementation. (This should be converted to use gpiolib or pincontrol and move to drivers/...) Also make sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at the same time as the new PINCTRL implementation, and only make PINCTRL_ADI2 selectable for the Blackfin families that actually have it. This way it is still possible to add e.g. I2C-based pin control expanders on the Blackfin. Cc: Steven Miao <realmz6(a)gmail.com> Cc: Huanhuan Feng <huanhuan.feng(a)analog.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/blackfin/Kconfig | 7 +++++-- arch/blackfin/Kconfig.debug | 1 + drivers/pinctrl/Kconfig | 3 ++- 3 files changed, 8 insertions(+), 3 deletions(-) --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -319,11 +319,14 @@ config BF53x config GPIO_ADI def_bool y + depends on !PINCTRL depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561) -config PINCTRL +config PINCTRL_BLACKFIN_ADI2 def_bool y - depends on BF54x || BF60x + depends on (BF54x || BF60x) + select PINCTRL + select PINCTRL_ADI2 config MEM_MT48LC64M4A2FB_7E bool --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -17,6 +17,7 @@ config DEBUG_VERBOSE config DEBUG_MMRS tristate "Generate Blackfin MMR tree" + depends on !PINCTRL select DEBUG_FS help Create a tree of Blackfin MMRs via the debugfs tree. If --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -26,7 +26,8 @@ config DEBUG_PINCTRL config PINCTRL_ADI2 bool "ADI pin controller driver" - depends on BLACKFIN + depends on (BF54x || BF60x) + depends on !GPIO_ADI select PINMUX select IRQ_DOMAIN help Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are queue-4.9/pinctrl-adi2-fix-kconfig-build-problem.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "perf symbols: Fix symbols__fixup_end heuristic for corner cases" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf symbols: Fix symbols__fixup_end heuristic for corner cases to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-symbols-fix-symbols__fixup_end-heuristic-for-corner-cases.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Daniel Borkmann <daniel(a)iogearbox.net> Date: Wed, 15 Mar 2017 22:53:37 +0100 Subject: perf symbols: Fix symbols__fixup_end heuristic for corner cases From: Daniel Borkmann <daniel(a)iogearbox.net> [ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ] The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.148961436… Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/symbol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -202,7 +202,7 @@ void symbols__fixup_end(struct rb_root * /* Last entry */ if (curr->end == curr->start) - curr->end = roundup(curr->start, 4096); + curr->end = roundup(curr->start, 4096) + 4096; } void __map_groups__fixup_end(struct map_groups *mg, enum map_type type) Patches currently in stable-queue which might be from daniel(a)iogearbox.net are queue-4.9/perf-symbols-fix-symbols__fixup_end-heuristic-for-corner-cases.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI/PME: Handle invalid data when reading Root Status" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI/PME: Handle invalid data when reading Root Status to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-pme-handle-invalid-data-when-reading-root-status.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Qiang <zhengqiang10(a)huawei.com> Date: Thu, 28 Sep 2017 11:54:34 +0800 Subject: PCI/PME: Handle invalid data when reading Root Status From: Qiang <zhengqiang10(a)huawei.com> [ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ] PCIe PME and native hotplug share the same interrupt number, so hotplug interrupts are also processed by PME. In some cases, e.g., a Link Down interrupt, a device may be present but unreachable, so when we try to read its Root Status register, the read fails and we get all ones data (0xffffffff). Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e., "some device has asserted PME," so we scheduled pcie_pme_work_fn(). This caused an infinite loop because pcie_pme_work_fn() tried to handle PME requests until PCI_EXP_RTSTA_PME is cleared, but with the link down, PCI_EXP_RTSTA_PME can't be cleared. Check for the invalid 0xffffffff data everywhere we read the Root Status register. 1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from non-existent devices") added similar checks in the hotplug driver. Signed-off-by: Qiang Zheng <zhengqiang10(a)huawei.com> [bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow other similar checks] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/pcie/pme.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -232,6 +232,9 @@ static void pcie_pme_work_fn(struct work break; pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); + if (rtsta == (u32) ~0) + break; + if (rtsta & PCI_EXP_RTSTA_PME) { /* * Clear PME status of the port. If there are other @@ -279,7 +282,7 @@ static irqreturn_t pcie_pme_irq(int irq, spin_lock_irqsave(&data->lock, flags); pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); - if (!(rtsta & PCI_EXP_RTSTA_PME)) { + if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) { spin_unlock_irqrestore(&data->lock, flags); return IRQ_NONE; } Patches currently in stable-queue which might be from zhengqiang10(a)huawei.com are queue-4.9/pci-pme-handle-invalid-data-when-reading-root-status.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: Do not allocate more buses than available in parent" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: Do not allocate more buses than available in parent to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-do-not-allocate-more-buses-than-available-in-parent.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Mika Westerberg <mika.westerberg(a)linux.intel.com> Date: Fri, 13 Oct 2017 21:35:43 +0300 Subject: PCI: Do not allocate more buses than available in parent From: Mika Westerberg <mika.westerberg(a)linux.intel.com> [ Upstream commit a20c7f36bd3d20d245616ae223bb9d05dfb6f050 ] One can ask more buses to be reserved for hotplug bridges by passing pci=hpbussize=N in the kernel command line. If the parent bus does not have enough bus space available we incorrectly create child bus with the requested number of subordinate buses. In the example below hpbussize is set to one more than we have available buses in the root port: pci 0000:07:00.0: [8086:1578] type 01 class 0x060400 pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:07:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:08: busn_res: can not insert [bus 08-ff] under [bus 07-3f] (conflicts with (null) [bus 07-3f]) pci_bus 0000:08: scanning bus ... pci_bus 0000:0a: bus scan returning with max=40 pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 40 pci_bus 0000:0a: [bus 0a-40] partially hidden behind bridge 0000:07 [bus 07-3f] pci_bus 0000:08: bus scan returning with max=40 pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 40 Instead of allowing this, limit the subordinate number to be less than or equal the maximum subordinate number allocated for the parent bus (if it has any). Signed-off-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> [bhelgaas: remove irrelevant dmesg messages] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/probe.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -932,7 +932,8 @@ int pci_scan_bridge(struct pci_bus *bus, child = pci_add_new_bus(bus, dev, max+1); if (!child) goto out; - pci_bus_insert_busn_res(child, max+1, 0xff); + pci_bus_insert_busn_res(child, max+1, + bus->busn_res.end); } max++; buses = (buses & 0xff000000) @@ -2136,6 +2137,10 @@ unsigned int pci_scan_child_bus(struct p if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) { if (max - bus->busn_res.start < pci_hotplug_bus_size - 1) max = bus->busn_res.start + pci_hotplug_bus_size - 1; + + /* Do not allocate more buses than we have room left */ + if (max > bus->busn_res.end) + max = bus->busn_res.end; } /* Patches currently in stable-queue which might be from mika.westerberg(a)linux.intel.com are queue-4.9/pci-do-not-allocate-more-buses-than-available-in-parent.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: Detach driver before procfs & sysfs teardown on device remove" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: Detach driver before procfs & sysfs teardown on device remove to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-detach-driver-before-procfs-sysfs-teardown-on-device-remove.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Alex Williamson <alex.williamson(a)redhat.com> Date: Wed, 11 Oct 2017 15:35:56 -0600 Subject: PCI: Detach driver before procfs & sysfs teardown on device remove From: Alex Williamson <alex.williamson(a)redhat.com> [ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ] When removing a device, for example a VF being removed due to SR-IOV teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual hot-unplug, we first remove the procfs and sysfs attributes for the device before attempting to release the device from any driver bound to it. Unbinding the driver from the device can take time. The device might need to write out data or it might be actively in use. If it's in use by userspace through a vfio driver, the unbind might block until the user releases the device. This leads to a potentially non-trivial amount of time where the device exists, but we've torn down the interfaces that userspace uses to examine devices, for instance lspci might generate this sort of error: pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config lspci: Unable to read the standard configuration space header of device 0000:01:0a.3 We don't seem to have any dependence on this teardown ordering in the kernel, so let's unbind the driver first, which is also more symmetric with the instantiation of the device in pci_bus_add_device(). Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/remove.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -19,9 +19,9 @@ static void pci_stop_dev(struct pci_dev pci_pme_active(dev, false); if (dev->is_added) { + device_release_driver(&dev->dev); pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); - device_release_driver(&dev->dev); dev->is_added = 0; } Patches currently in stable-queue which might be from alex.williamson(a)redhat.com are queue-4.9/pci-detach-driver-before-procfs-sysfs-teardown-on-device-remove.patch queue-4.9/iommu-amd-limit-the-iova-page-range-to-the-specified-addresses.patch queue-4.9/iommu-mediatek-fix-driver-name.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "openrisc: fix issue handling 8 byte get_user calls" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled openrisc: fix issue handling 8 byte get_user calls to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: openrisc-fix-issue-handling-8-byte-get_user-calls.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Stafford Horne <shorne(a)gmail.com> Date: Mon, 13 Mar 2017 07:44:45 +0900 Subject: openrisc: fix issue handling 8 byte get_user calls From: Stafford Horne <shorne(a)gmail.com> [ Upstream commit 154e67cd8e8f964809d0e75e44bb121b169c75b3 ] Was getting the following error with allmodconfig: ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined! This was simply a missing break statement, causing an unwanted fall through. Signed-off-by: Stafford Horne <shorne(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/openrisc/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/openrisc/include/asm/uaccess.h +++ b/arch/openrisc/include/asm/uaccess.h @@ -211,7 +211,7 @@ do { \ case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break; \ case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \ case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \ - case 8: __get_user_asm2(x, ptr, retval); \ + case 8: __get_user_asm2(x, ptr, retval); break; \ default: (x) = __get_user_bad(); \ } \ } while (0) Patches currently in stable-queue which might be from shorne(a)gmail.com are queue-4.9/openrisc-fix-issue-handling-8-byte-get_user-calls.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "nvmet-rdma: Fix a possible uninitialized variable dereference" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvmet-rdma: Fix a possible uninitialized variable dereference to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvmet-rdma-fix-a-possible-uninitialized-variable-dereference.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Sagi Grimberg <sagi(a)grimberg.me> Date: Thu, 9 Mar 2017 13:45:52 +0200 Subject: nvmet-rdma: Fix a possible uninitialized variable dereference From: Sagi Grimberg <sagi(a)grimberg.me> [ Upstream commit b25634e2a051bef4b2524b11adddfbfa6448f6cd ] When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it. Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables. Reported-by: Yi Zhang <yizhan(a)redhat.com> Reported-by: Raju Rangoju <rajur(a)chelsio.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Tested-by: Raju Rangoju <rajur(a)chelsio.com> Signed-off-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/target/rdma.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -703,11 +703,6 @@ static void nvmet_rdma_handle_command(st { u16 status; - cmd->queue = queue; - cmd->n_rdma = 0; - cmd->req.port = queue->port; - - ib_dma_sync_single_for_cpu(queue->dev->device, cmd->cmd->sge[0].addr, cmd->cmd->sge[0].length, DMA_FROM_DEVICE); @@ -760,9 +755,12 @@ static void nvmet_rdma_recv_done(struct cmd->queue = queue; rsp = nvmet_rdma_get_rsp(queue); + rsp->queue = queue; rsp->cmd = cmd; rsp->flags = 0; rsp->req.cmd = cmd->nvme_cmd; + rsp->req.port = queue->port; + rsp->n_rdma = 0; if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) { unsigned long flags; Patches currently in stable-queue which might be from sagi(a)grimberg.me are queue-4.9/blk-mq-fix-tagset-reinit-in-the-presence-of-cpu-hot-unplug.patch queue-4.9/nvmet-confirm-sq-percpu-has-scheduled-and-switched-to-atomic.patch queue-4.9/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.9/nvme-loop-fix-a-possible-use-after-free-when-destroying-the-admin-queue.patch queue-4.9/nvmet-rdma-fix-a-possible-uninitialized-variable-dereference.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "nvmet: confirm sq percpu has scheduled and switched to atomic" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvmet: confirm sq percpu has scheduled and switched to atomic to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvmet-confirm-sq-percpu-has-scheduled-and-switched-to-atomic.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Sagi Grimberg <sagi(a)grimberg.me> Date: Mon, 6 Mar 2017 18:46:20 +0200 Subject: nvmet: confirm sq percpu has scheduled and switched to atomic From: Sagi Grimberg <sagi(a)grimberg.me> [ Upstream commit d11ea004a458b982e19b188c386e25a9b66ec446 ] percpu_ref_kill is not enough to prevent subsequent percpu_ref_tryget_live from failing. Hence call perfcpu_ref_kill_confirm to make it safe. Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/target/core.c | 11 ++++++++++- drivers/nvme/target/nvmet.h | 1 + 2 files changed, 11 insertions(+), 1 deletion(-) --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -422,6 +422,13 @@ void nvmet_sq_setup(struct nvmet_ctrl *c ctrl->sqs[qid] = sq; } +static void nvmet_confirm_sq(struct percpu_ref *ref) +{ + struct nvmet_sq *sq = container_of(ref, struct nvmet_sq, ref); + + complete(&sq->confirm_done); +} + void nvmet_sq_destroy(struct nvmet_sq *sq) { /* @@ -430,7 +437,8 @@ void nvmet_sq_destroy(struct nvmet_sq *s */ if (sq->ctrl && sq->ctrl->sqs && sq->ctrl->sqs[0] == sq) nvmet_async_events_free(sq->ctrl); - percpu_ref_kill(&sq->ref); + percpu_ref_kill_and_confirm(&sq->ref, nvmet_confirm_sq); + wait_for_completion(&sq->confirm_done); wait_for_completion(&sq->free_done); percpu_ref_exit(&sq->ref); @@ -458,6 +466,7 @@ int nvmet_sq_init(struct nvmet_sq *sq) return ret; } init_completion(&sq->free_done); + init_completion(&sq->confirm_done); return 0; } --- a/drivers/nvme/target/nvmet.h +++ b/drivers/nvme/target/nvmet.h @@ -73,6 +73,7 @@ struct nvmet_sq { u16 qid; u16 size; struct completion free_done; + struct completion confirm_done; }; /** Patches currently in stable-queue which might be from sagi(a)grimberg.me are queue-4.9/blk-mq-fix-tagset-reinit-in-the-presence-of-cpu-hot-unplug.patch queue-4.9/nvmet-confirm-sq-percpu-has-scheduled-and-switched-to-atomic.patch queue-4.9/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.9/nvme-loop-fix-a-possible-use-after-free-when-destroying-the-admin-queue.patch queue-4.9/nvmet-rdma-fix-a-possible-uninitialized-variable-dereference.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "nvme: use kref_get_unless_zero in nvme_find_get_ns" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvme: use kref_get_unless_zero in nvme_find_get_ns to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Christoph Hellwig <hch(a)lst.de> Date: Wed, 18 Oct 2017 13:20:01 +0200 Subject: nvme: use kref_get_unless_zero in nvme_find_get_ns From: Christoph Hellwig <hch(a)lst.de> [ Upstream commit 2dd4122854f697afc777582d18548dded03ce5dd ] For kref_get_unless_zero to protect against lookup vs free races we need to use it in all places where we aren't guaranteed to already hold a reference. There is no such guarantee in nvme_find_get_ns, so switch to kref_get_unless_zero in this function. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Sagi Grimberg <sagi(a)grimberg.me> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/host/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1619,7 +1619,8 @@ static struct nvme_ns *nvme_find_get_ns( mutex_lock(&ctrl->namespaces_mutex); list_for_each_entry(ns, &ctrl->namespaces, list) { if (ns->ns_id == nsid) { - kref_get(&ns->kref); + if (!kref_get_unless_zero(&ns->kref)) + continue; ret = ns; break; } Patches currently in stable-queue which might be from hch(a)lst.de are queue-4.9/xfs-fix-incorrect-extent-state-in-xfs_bmap_add_extent_unwritten_real.patch queue-4.9/nvmet-confirm-sq-percpu-has-scheduled-and-switched-to-atomic.patch queue-4.9/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.9/target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch queue-4.9/nvme-loop-fix-a-possible-use-after-free-when-destroying-the-admin-queue.patch queue-4.9/nvmet-rdma-fix-a-possible-uninitialized-variable-dereference.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "nvme-loop: fix a possible use-after-free when destroying the admin queue" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvme-loop: fix a possible use-after-free when destroying the admin queue to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvme-loop-fix-a-possible-use-after-free-when-destroying-the-admin-queue.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Sagi Grimberg <sagi(a)grimberg.me> Date: Mon, 27 Feb 2017 18:44:45 +0200 Subject: nvme-loop: fix a possible use-after-free when destroying the admin queue From: Sagi Grimberg <sagi(a)grimberg.me> [ Upstream commit e4c5d3762e2d6d274bd1cc948c47063becfa2103 ] we need to destroy the nvmet sq and let it finish gracefully before continue to cleanup the queue. Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/target/loop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -288,9 +288,9 @@ static struct blk_mq_ops nvme_loop_admin static void nvme_loop_destroy_admin_queue(struct nvme_loop_ctrl *ctrl) { + nvmet_sq_destroy(&ctrl->queues[0].nvme_sq); blk_cleanup_queue(ctrl->ctrl.admin_q); blk_mq_free_tag_set(&ctrl->admin_tag_set); - nvmet_sq_destroy(&ctrl->queues[0].nvme_sq); } static void nvme_loop_free_ctrl(struct nvme_ctrl *nctrl) Patches currently in stable-queue which might be from sagi(a)grimberg.me are queue-4.9/blk-mq-fix-tagset-reinit-in-the-presence-of-cpu-hot-unplug.patch queue-4.9/nvmet-confirm-sq-percpu-has-scheduled-and-switched-to-atomic.patch queue-4.9/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.9/nvme-loop-fix-a-possible-use-after-free-when-destroying-the-admin-queue.patch queue-4.9/nvmet-rdma-fix-a-possible-uninitialized-variable-dereference.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "NFSv4.1 respect server's max size in CREATE_SESSION" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFSv4.1 respect server's max size in CREATE_SESSION to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsv4.1-respect-server-s-max-size-in-create_session.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Olga Kornievskaia <kolga(a)netapp.com> Date: Wed, 8 Mar 2017 14:39:15 -0500 Subject: NFSv4.1 respect server's max size in CREATE_SESSION From: Olga Kornievskaia <kolga(a)netapp.com> [ Upstream commit 033853325fe3bdc70819a8b97915bd3bca41d3af ] Currently client doesn't respect max sizes server returns in CREATE_SESSION. nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0 so they never get set to the sizes returned by the server. Signed-off-by: Olga Kornievskaia <kolga(a)netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/nfs4client.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -1004,9 +1004,9 @@ static void nfs4_session_set_rwsize(stru server_resp_sz = sess->fc_attrs.max_resp_sz - nfs41_maxread_overhead; server_rqst_sz = sess->fc_attrs.max_rqst_sz - nfs41_maxwrite_overhead; - if (server->rsize > server_resp_sz) + if (!server->rsize || server->rsize > server_resp_sz) server->rsize = server_resp_sz; - if (server->wsize > server_rqst_sz) + if (!server->wsize || server->wsize > server_rqst_sz) server->wsize = server_rqst_sz; #endif /* CONFIG_NFS_V4_1 */ } Patches currently in stable-queue which might be from kolga(a)netapp.com are queue-4.9/nfsv4.1-respect-server-s-max-size-in-create_session.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "NFSD: fix nfsd_reset_versions for NFSv4." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFSD: fix nfsd_reset_versions for NFSv4. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsd-fix-nfsd_reset_versions-for-nfsv4.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: NeilBrown <neilb(a)suse.com> Date: Fri, 10 Mar 2017 11:36:39 +1100 Subject: NFSD: fix nfsd_reset_versions for NFSv4. From: NeilBrown <neilb(a)suse.com> [ Upstream commit 800a938f0bf9130c8256116649c0cc5806bfb2fd ] If you write "-2 -3 -4" to the "versions" file, it will notice that no versions are enabled, and nfsd_reset_versions() is called. This enables all major versions, not no minor versions. So we lose the invariant that NFSv4 is only advertised when at least one minor is enabled. Fix the code to explicitly enable minor versions for v4, change it to use nfsd_vers() to test and set, and simplify the code. Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfsd/nfssvc.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -400,23 +400,20 @@ static void nfsd_last_thread(struct svc_ void nfsd_reset_versions(void) { - int found_one = 0; int i; - for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++) { - if (nfsd_program.pg_vers[i]) - found_one = 1; - } + for (i = 0; i < NFSD_NRVERS; i++) + if (nfsd_vers(i, NFSD_TEST)) + return; - if (!found_one) { - for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++) - nfsd_program.pg_vers[i] = nfsd_version[i]; -#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL) - for (i = NFSD_ACL_MINVERS; i < NFSD_ACL_NRVERS; i++) - nfsd_acl_program.pg_vers[i] = - nfsd_acl_version[i]; -#endif - } + for (i = 0; i < NFSD_NRVERS; i++) + if (i != 4) + nfsd_vers(i, NFSD_SET); + else { + int minor = 0; + while (nfsd_minorversion(minor, NFSD_SET) >= 0) + minor++; + } } /* Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.9/md-cluster-free-md_cluster_info-if-node-leave-cluster.patch queue-4.9/autofs-fix-careless-error-in-recent-commit.patch queue-4.9/raid5-set-r5_expanded-on-parity-devices-as-well-as-data.patch queue-4.9/nfsd-fix-nfsd_reset_versions-for-nfsv4.patch queue-4.9/nfsd-fix-nfsd_minorversion-..-nfsd_avail.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFSD: fix nfsd_minorversion(.., NFSD_AVAIL) to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsd-fix-nfsd_minorversion-..-nfsd_avail.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: NeilBrown <neilb(a)suse.com> Date: Fri, 10 Mar 2017 11:36:39 +1100 Subject: NFSD: fix nfsd_minorversion(.., NFSD_AVAIL) From: NeilBrown <neilb(a)suse.com> [ Upstream commit 928c6fb3a9bfd6c5b287aa3465226add551c13c0 ] Current code will return 1 if the version is supported, and -1 if it isn't. This is confusing and inconsistent with the one place where this is used. So change to return 1 if it is supported, and zero if not. i.e. an error is never returned. Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfsd/nfssvc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -155,7 +155,8 @@ int nfsd_vers(int vers, enum vers_op cha int nfsd_minorversion(u32 minorversion, enum vers_op change) { - if (minorversion > NFSD_SUPPORTED_MINOR_VERSION) + if (minorversion > NFSD_SUPPORTED_MINOR_VERSION && + change != NFSD_AVAIL) return -1; switch(change) { case NFSD_SET: Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.9/md-cluster-free-md_cluster_info-if-node-leave-cluster.patch queue-4.9/autofs-fix-careless-error-in-recent-commit.patch queue-4.9/raid5-set-r5_expanded-on-parity-devices-as-well-as-data.patch queue-4.9/nfsd-fix-nfsd_reset_versions-for-nfsv4.patch queue-4.9/nfsd-fix-nfsd_minorversion-..-nfsd_avail.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "netfilter: ipvs: Fix inappropriate output of procfs" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: ipvs: Fix inappropriate output of procfs to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-ipvs-fix-inappropriate-output-of-procfs.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: KUWAZAWA Takuya <albatross0(a)gmail.com> Date: Sun, 15 Oct 2017 20:54:10 +0900 Subject: netfilter: ipvs: Fix inappropriate output of procfs From: KUWAZAWA Takuya <albatross0(a)gmail.com> [ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ] Information about ipvs in different network namespace can be seen via procfs. How to reproduce: # ip netns add ns01 # ip netns add ns02 # ip netns exec ns01 ip a add dev lo 127.0.0.1/8 # ip netns exec ns02 ip a add dev lo 127.0.0.1/8 # ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80 # ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80 The ipvsadm displays information about its own network namespace only. # ip netns exec ns01 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.1:80 wlc # ip netns exec ns02 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.2:80 wlc But I can see information about other network namespace via procfs. # ip netns exec ns01 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010101:0050 wlc TCP 0A010102:0050 wlc # ip netns exec ns02 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010102:0050 wlc Signed-off-by: KUWAZAWA Takuya <albatross0(a)gmail.com> Acked-by: Julian Anastasov <ja(a)ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netfilter/ipvs/ip_vs_ctl.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2040,12 +2040,16 @@ static int ip_vs_info_seq_show(struct se seq_puts(seq, " -> RemoteAddress:Port Forward Weight ActiveConn InActConn\n"); } else { + struct net *net = seq_file_net(seq); + struct netns_ipvs *ipvs = net_ipvs(net); const struct ip_vs_service *svc = v; const struct ip_vs_iter *iter = seq->private; const struct ip_vs_dest *dest; struct ip_vs_scheduler *sched = rcu_dereference(svc->scheduler); char *sched_name = sched ? sched->name : "none"; + if (svc->ipvs != ipvs) + return 0; if (iter->table == ip_vs_svc_table) { #ifdef CONFIG_IP_VS_IPV6 if (svc->af == AF_INET6) Patches currently in stable-queue which might be from albatross0(a)gmail.com are queue-4.9/netfilter-ipvs-fix-inappropriate-output-of-procfs.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "netfilter: bridge: honor frag_max_size when refragmenting" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: bridge: honor frag_max_size when refragmenting to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-bridge-honor-frag_max_size-when-refragmenting.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Florian Westphal <fw(a)strlen.de> Date: Thu, 9 Mar 2017 23:22:30 +0100 Subject: netfilter: bridge: honor frag_max_size when refragmenting From: Florian Westphal <fw(a)strlen.de> [ Upstream commit 4ca60d08cbe65f501baad64af50fceba79c19fbb ] consider a bridge with mtu 9000, but end host sending smaller packets to another host with mtu < 9000. In this case, after reassembly, bridge+defrag would refragment, and then attempt to send the reassembled packet as long as it was below 9k. Instead we have to cap by the largest fragment size seen. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bridge/br_netfilter_hooks.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -706,18 +706,20 @@ static unsigned int nf_bridge_mtu_reduct static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff *skb) { - struct nf_bridge_info *nf_bridge; - unsigned int mtu_reserved; + struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb); + unsigned int mtu, mtu_reserved; mtu_reserved = nf_bridge_mtu_reduction(skb); + mtu = skb->dev->mtu; - if (skb_is_gso(skb) || skb->len + mtu_reserved <= skb->dev->mtu) { + if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu) + mtu = nf_bridge->frag_max_size; + + if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) { nf_bridge_info_free(skb); return br_dev_queue_push_xmit(net, sk, skb); } - nf_bridge = nf_bridge_info_get(skb); - /* This is wrong! We should preserve the original fragment * boundaries by preserving frag_list rather than refragmenting. */ Patches currently in stable-queue which might be from fw(a)strlen.de are queue-4.9/netfilter-bridge-honor-frag_max_size-when-refragmenting.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: wimax/i2400m: fix NULL-deref at probe" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: wimax/i2400m: fix NULL-deref at probe to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-wimax-i2400m-fix-null-deref-at-probe.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 13 Mar 2017 13:42:03 +0100 Subject: net: wimax/i2400m: fix NULL-deref at probe From: Johan Hovold <johan(a)kernel.org> [ Upstream commit 6e526fdff7be4f13b24f929a04c0e9ae6761291e ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. The endpoints are specifically dereferenced in the i2400m_bootrom_init path during probe (e.g. in i2400mu_tx_bulk_out). Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown and reset backends") Cc: Inaky Perez-Gonzalez <inaky(a)linux.intel.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wimax/i2400m/usb.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -467,6 +467,9 @@ int i2400mu_probe(struct usb_interface * struct i2400mu *i2400mu; struct usb_device *usb_dev = interface_to_usbdev(iface); + if (iface->cur_altsetting->desc.bNumEndpoints < 4) + return -ENODEV; + if (usb_dev->speed != USB_SPEED_HIGH) dev_err(dev, "device not connected as high speed\n"); Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.9/net-wimax-i2400m-fix-null-deref-at-probe.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: Resend IGMP memberships upon peer notification." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: Resend IGMP memberships upon peer notification. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-resend-igmp-memberships-upon-peer-notification.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Vlad Yasevich <vyasevich(a)gmail.com> Date: Tue, 14 Mar 2017 08:58:08 -0400 Subject: net: Resend IGMP memberships upon peer notification. From: Vlad Yasevich <vyasevich(a)gmail.com> [ Upstream commit 37c343b4f4e70e9dc328ab04903c0ec8d154c1a4 ] When we notify peers of potential changes, it's also good to update IGMP memberships. For example, during VM migration, updating IGMP memberships will redirect existing multicast streams to the VM at the new location. Signed-off-by: Vladislav Yasevich <vyasevic(a)redhat.com> Acked-by: Michael S. Tsirkin <mst(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1304,6 +1304,7 @@ void netdev_notify_peers(struct net_devi { rtnl_lock(); call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev); + call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev); rtnl_unlock(); } EXPORT_SYMBOL(netdev_notify_peers); Patches currently in stable-queue which might be from vyasevich(a)gmail.com are queue-4.9/net-resend-igmp-memberships-upon-peer-notification.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: mpls: Fix nexthop alive tracking on down events" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: mpls: Fix nexthop alive tracking on down events to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mpls-fix-nexthop-alive-tracking-on-down-events.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Ahern <dsa(a)cumulusnetworks.com> Date: Mon, 13 Mar 2017 16:49:10 -0700 Subject: net: mpls: Fix nexthop alive tracking on down events From: David Ahern <dsa(a)cumulusnetworks.com> [ Upstream commit 61733c91c454a61be0ffc93fe46a5d5f2f048c1c ] Alive tracking of nexthops can account for a link twice if the carrier goes down followed by an admin down of the same link rendering multipath routes useless. This is similar to 79099aab38c8 for UNREGISTER events and DOWN events. Fix by tracking number of alive nexthops in mpls_ifdown similar to the logic in mpls_ifup. Checking the flags per nexthop once after all events have been processed is simpler than trying to maintian a running count through all event combinations. Also, WRITE_ONCE is used instead of ACCESS_ONCE to set rt_nhn_alive per a comment from checkpatch: WARNING: Prefer WRITE_ONCE(<FOO>, <BAR>) over ACCESS_ONCE(<FOO>) = <BAR> Fixes: c89359a42e2a4 ("mpls: support for dead routes") Signed-off-by: David Ahern <dsa(a)cumulusnetworks.com> Acked-by: Robert Shearman <rshearma(a)brocade.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/mpls/af_mpls.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -937,6 +937,8 @@ static void mpls_ifdown(struct net_devic { struct mpls_route __rcu **platform_label; struct net *net = dev_net(dev); + unsigned int nh_flags = RTNH_F_DEAD | RTNH_F_LINKDOWN; + unsigned int alive; unsigned index; platform_label = rtnl_dereference(net->mpls.platform_label); @@ -946,9 +948,11 @@ static void mpls_ifdown(struct net_devic if (!rt) continue; + alive = 0; change_nexthops(rt) { if (rtnl_dereference(nh->nh_dev) != dev) - continue; + goto next; + switch (event) { case NETDEV_DOWN: case NETDEV_UNREGISTER: @@ -956,13 +960,16 @@ static void mpls_ifdown(struct net_devic /* fall through */ case NETDEV_CHANGE: nh->nh_flags |= RTNH_F_LINKDOWN; - if (event != NETDEV_UNREGISTER) - ACCESS_ONCE(rt->rt_nhn_alive) = rt->rt_nhn_alive - 1; break; } if (event == NETDEV_UNREGISTER) RCU_INIT_POINTER(nh->nh_dev, NULL); +next: + if (!(nh->nh_flags & nh_flags)) + alive++; } endfor_nexthops(rt); + + WRITE_ONCE(rt->rt_nhn_alive, alive); } } Patches currently in stable-queue which might be from dsa(a)cumulusnetworks.com are queue-4.9/net-mpls-fix-nexthop-alive-tracking-on-down-events.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net/mlx5: Fix create autogroup prev initializer" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx5: Fix create autogroup prev initializer to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx5-fix-create-autogroup-prev-initializer.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Paul Blakey <paulb(a)mellanox.com> Date: Fri, 10 Mar 2017 14:33:01 +0200 Subject: net/mlx5: Fix create autogroup prev initializer From: Paul Blakey <paulb(a)mellanox.com> [ Upstream commit af36370569eb37420e1e78a2e60c277b781fcd00 ] The autogroups list is a list of non overlapping group boundaries sorted by their start index. If the autogroups list wasn't empty and an empty group slot was found at the start of the list, the new group was added to the end of the list instead of the beginning, as the prev initializer was incorrect. When this was repeated, it caused multiple groups to have overlapping boundaries. Fixed that by correctly initializing the prev pointer to the start of the list. Fixes: eccec8da3b4e ('net/mlx5: Keep autogroups list ordered') Signed-off-by: Paul Blakey <paulb(a)mellanox.com> Reviewed-by: Mark Bloch <markb(a)mellanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1015,7 +1015,7 @@ static struct mlx5_flow_group *create_au u32 *match_criteria) { int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in); - struct list_head *prev = ft->node.children.prev; + struct list_head *prev = &ft->node.children; unsigned int candidate_index = 0; struct mlx5_flow_group *fg; void *match_criteria_addr; Patches currently in stable-queue which might be from paulb(a)mellanox.com are queue-4.9/net-mlx5-fix-create-autogroup-prev-initializer.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net/mlx5: Don't save PCI state when PCI error is detected" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx5: Don't save PCI state when PCI error is detected to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx5-don-t-save-pci-state-when-pci-error-is-detected.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Daniel Jurgens <danielj(a)mellanox.com> Date: Fri, 10 Mar 2017 14:33:02 +0200 Subject: net/mlx5: Don't save PCI state when PCI error is detected From: Daniel Jurgens <danielj(a)mellanox.com> [ Upstream commit 5d47f6c89d568ab61712d8c40676fbb020b68752 ] When a PCI error is detected the PCI state could be corrupt, don't save it in that flow. Save the state after initialization. After restoring the PCI state during slot reset save it again, restoring the state destroys the previously saved state info. Fixes: 05ac2c0b7438 ('net/mlx5: Fix race between PCI error handlers and health work') Signed-off-by: Daniel Jurgens <danielj(a)mellanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1283,6 +1283,7 @@ static int init_one(struct pci_dev *pdev if (err) goto clean_load; + pci_save_state(pdev); return 0; clean_load: @@ -1331,9 +1332,8 @@ static pci_ers_result_t mlx5_pci_err_det mlx5_enter_error_state(dev); mlx5_unload_one(dev, priv, false); - /* In case of kernel call save the pci state and drain the health wq */ + /* In case of kernel call drain the health wq */ if (state) { - pci_save_state(pdev); mlx5_drain_health_wq(dev); mlx5_pci_disable_device(dev); } @@ -1385,6 +1385,7 @@ static pci_ers_result_t mlx5_pci_slot_re pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); if (wait_vital(pdev)) { dev_err(&pdev->dev, "%s: wait_vital timed out\n", __func__); Patches currently in stable-queue which might be from danielj(a)mellanox.com are queue-4.9/ib-core-fix-calculation-of-maximum-roce-mtu.patch queue-4.9/net-mlx5-don-t-save-pci-state-when-pci-error-is-detected.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net/mlx4_core: Avoid delays during VF driver device shutdown" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx4_core: Avoid delays during VF driver device shutdown to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx4_core-avoid-delays-during-vf-driver-device-shutdown.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Jack Morgenstein <jackm(a)dev.mellanox.co.il> Date: Mon, 13 Mar 2017 19:29:08 +0200 Subject: net/mlx4_core: Avoid delays during VF driver device shutdown From: Jack Morgenstein <jackm(a)dev.mellanox.co.il> [ Upstream commit 4cbe4dac82e423ecc9a0ba46af24a860853259f4 ] Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. For such Hypervisors, there is a race condition between the VF's shutdown method and its internal-error detection/reset thread. The internal-error detection/reset thread (which runs every 5 seconds) also detects a disabled comm channel. If the internal-error detection/reset flow wins the race, we still get delays (while that flow tries repeatedly to detect comm-channel recovery). The cited commit fixed the command timeout problem when the internal-error detection/reset flow loses the race. This commit avoids the unneeded delays when the internal-error detection/reset flow wins. Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown") Signed-off-by: Jack Morgenstein <jackm(a)dev.mellanox.co.il> Reported-by: Simon Xiao <sixiao(a)microsoft.com> Signed-off-by: Tariq Toukan <tariqt(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 11 +++++++++++ drivers/net/ethernet/mellanox/mlx4/main.c | 11 +++++++++++ include/linux/mlx4/device.h | 1 + 3 files changed, 23 insertions(+) --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2304,6 +2304,17 @@ static int sync_toggles(struct mlx4_dev rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read)); if (wr_toggle == 0xffffffff || rd_toggle == 0xffffffff) { /* PCI might be offline */ + + /* If device removal has been requested, + * do not continue retrying. + */ + if (dev->persist->interface_state & + MLX4_INTERFACE_STATE_NOWAIT) { + mlx4_warn(dev, + "communication channel is offline\n"); + return -EIO; + } + msleep(100); wr_toggle = swab32(readl(&priv->mfunc.comm-> slave_write)); --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1940,6 +1940,14 @@ static int mlx4_comm_check_offline(struc (u32)(1 << COMM_CHAN_OFFLINE_OFFSET)); if (!offline_bit) return 0; + + /* If device removal has been requested, + * do not continue retrying. + */ + if (dev->persist->interface_state & + MLX4_INTERFACE_STATE_NOWAIT) + break; + /* There are cases as part of AER/Reset flow that PF needs * around 100 msec to load. We therefore sleep for 100 msec * to allow other tasks to make use of that CPU during this @@ -3954,6 +3962,9 @@ static void mlx4_remove_one(struct pci_d struct devlink *devlink = priv_to_devlink(priv); int active_vfs = 0; + if (mlx4_is_slave(dev)) + persist->interface_state |= MLX4_INTERFACE_STATE_NOWAIT; + mutex_lock(&persist->interface_state_mutex); persist->interface_state |= MLX4_INTERFACE_STATE_DELETION; mutex_unlock(&persist->interface_state_mutex); --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -476,6 +476,7 @@ enum { enum { MLX4_INTERFACE_STATE_UP = 1 << 0, MLX4_INTERFACE_STATE_DELETION = 1 << 1, + MLX4_INTERFACE_STATE_NOWAIT = 1 << 2, }; #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ Patches currently in stable-queue which might be from jackm(a)dev.mellanox.co.il are queue-4.9/net-mlx4_core-avoid-delays-during-vf-driver-device-shutdown.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: initialize msg.msg_flags in recvfrom" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: initialize msg.msg_flags in recvfrom to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-initialize-msg.msg_flags-in-recvfrom.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Alexander Potapenko <glider(a)google.com> Date: Wed, 8 Mar 2017 18:08:16 +0100 Subject: net: initialize msg.msg_flags in recvfrom From: Alexander Potapenko <glider(a)google.com> [ Upstream commit 9f138fa609c47403374a862a08a41394be53d461 ] KMSAN reports a use of uninitialized memory in put_cmsg() because msg.msg_flags in recvfrom haven't been initialized properly. The flag values don't affect the result on this path, but it's still a good idea to initialize them explicitly. Signed-off-by: Alexander Potapenko <glider(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/socket.c | 1 + 1 file changed, 1 insertion(+) --- a/net/socket.c +++ b/net/socket.c @@ -1702,6 +1702,7 @@ SYSCALL_DEFINE6(recvfrom, int, fd, void /* We assume all kernel code knows the size of sockaddr_storage */ msg.msg_namelen = 0; msg.msg_iocb = NULL; + msg.msg_flags = 0; if (sock->file->f_flags & O_NONBLOCK) flags |= MSG_DONTWAIT; err = sock_recvmsg(sock, &msg, flags); Patches currently in stable-queue which might be from glider(a)google.com are queue-4.9/net-initialize-msg.msg_flags-in-recvfrom.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: bcmgenet: synchronize irq0 status between the isr and task" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: bcmgenet: synchronize irq0 status between the isr and task to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Doug Berger <opendmb(a)gmail.com> Date: Thu, 9 Mar 2017 16:58:47 -0800 Subject: net: bcmgenet: synchronize irq0 status between the isr and task From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 07c52d6a0b955a8a28834f9354793cfc4b81d0e9 ] Add a spinlock to ensure that irq0_stat is not unintentionally altered as the result of preemption. Also removed unserviced irq0 interrupts and removed irq1_stat since there is no bottom half service for those interrupts. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 73 +++++++++++++------------ drivers/net/ethernet/broadcom/genet/bcmgenet.h | 6 +- 2 files changed, 44 insertions(+), 35 deletions(-) --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2513,24 +2513,28 @@ static int bcmgenet_init_dma(struct bcmg /* Interrupt bottom half */ static void bcmgenet_irq_task(struct work_struct *work) { + unsigned long flags; + unsigned int status; struct bcmgenet_priv *priv = container_of( work, struct bcmgenet_priv, bcmgenet_irq_work); netif_dbg(priv, intr, priv->dev, "%s\n", __func__); - if (priv->irq0_stat & UMAC_IRQ_MPD_R) { - priv->irq0_stat &= ~UMAC_IRQ_MPD_R; + spin_lock_irqsave(&priv->lock, flags); + status = priv->irq0_stat; + priv->irq0_stat = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + if (status & UMAC_IRQ_MPD_R) { netif_dbg(priv, wol, priv->dev, "magic packet detected, waking up\n"); bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC); } /* Link UP/DOWN event */ - if (priv->irq0_stat & UMAC_IRQ_LINK_EVENT) { + if (status & UMAC_IRQ_LINK_EVENT) phy_mac_interrupt(priv->phydev, - !!(priv->irq0_stat & UMAC_IRQ_LINK_UP)); - priv->irq0_stat &= ~UMAC_IRQ_LINK_EVENT; - } + !!(status & UMAC_IRQ_LINK_UP)); } /* bcmgenet_isr1: handle Rx and Tx priority queues */ @@ -2539,22 +2543,21 @@ static irqreturn_t bcmgenet_isr1(int irq struct bcmgenet_priv *priv = dev_id; struct bcmgenet_rx_ring *rx_ring; struct bcmgenet_tx_ring *tx_ring; - unsigned int index; + unsigned int index, status; - /* Save irq status for bottom-half processing. */ - priv->irq1_stat = - bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_STAT) & + /* Read irq status */ + status = bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_STAT) & ~bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_MASK_STATUS); /* clear interrupts */ - bcmgenet_intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR); + bcmgenet_intrl2_1_writel(priv, status, INTRL2_CPU_CLEAR); netif_dbg(priv, intr, priv->dev, - "%s: IRQ=0x%x\n", __func__, priv->irq1_stat); + "%s: IRQ=0x%x\n", __func__, status); /* Check Rx priority queue interrupts */ for (index = 0; index < priv->hw_params->rx_queues; index++) { - if (!(priv->irq1_stat & BIT(UMAC_IRQ1_RX_INTR_SHIFT + index))) + if (!(status & BIT(UMAC_IRQ1_RX_INTR_SHIFT + index))) continue; rx_ring = &priv->rx_rings[index]; @@ -2567,7 +2570,7 @@ static irqreturn_t bcmgenet_isr1(int irq /* Check Tx priority queue interrupts */ for (index = 0; index < priv->hw_params->tx_queues; index++) { - if (!(priv->irq1_stat & BIT(index))) + if (!(status & BIT(index))) continue; tx_ring = &priv->tx_rings[index]; @@ -2587,19 +2590,20 @@ static irqreturn_t bcmgenet_isr0(int irq struct bcmgenet_priv *priv = dev_id; struct bcmgenet_rx_ring *rx_ring; struct bcmgenet_tx_ring *tx_ring; + unsigned int status; + unsigned long flags; - /* Save irq status for bottom-half processing. */ - priv->irq0_stat = - bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_STAT) & + /* Read irq status */ + status = bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_STAT) & ~bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_MASK_STATUS); /* clear interrupts */ - bcmgenet_intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR); + bcmgenet_intrl2_0_writel(priv, status, INTRL2_CPU_CLEAR); netif_dbg(priv, intr, priv->dev, - "IRQ=0x%x\n", priv->irq0_stat); + "IRQ=0x%x\n", status); - if (priv->irq0_stat & UMAC_IRQ_RXDMA_DONE) { + if (status & UMAC_IRQ_RXDMA_DONE) { rx_ring = &priv->rx_rings[DESC_INDEX]; if (likely(napi_schedule_prep(&rx_ring->napi))) { @@ -2608,7 +2612,7 @@ static irqreturn_t bcmgenet_isr0(int irq } } - if (priv->irq0_stat & UMAC_IRQ_TXDMA_DONE) { + if (status & UMAC_IRQ_TXDMA_DONE) { tx_ring = &priv->tx_rings[DESC_INDEX]; if (likely(napi_schedule_prep(&tx_ring->napi))) { @@ -2617,22 +2621,23 @@ static irqreturn_t bcmgenet_isr0(int irq } } - if (priv->irq0_stat & (UMAC_IRQ_PHY_DET_R | - UMAC_IRQ_PHY_DET_F | - UMAC_IRQ_LINK_EVENT | - UMAC_IRQ_HFB_SM | - UMAC_IRQ_HFB_MM | - UMAC_IRQ_MPD_R)) { - /* all other interested interrupts handled in bottom half */ - schedule_work(&priv->bcmgenet_irq_work); - } - if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) && - priv->irq0_stat & (UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR)) { - priv->irq0_stat &= ~(UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR); + status & (UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR)) { wake_up(&priv->wq); } + /* all other interested interrupts handled in bottom half */ + status &= (UMAC_IRQ_LINK_EVENT | + UMAC_IRQ_MPD_R); + if (status) { + /* Save irq status for bottom-half processing. */ + spin_lock_irqsave(&priv->lock, flags); + priv->irq0_stat |= status; + spin_unlock_irqrestore(&priv->lock, flags); + + schedule_work(&priv->bcmgenet_irq_work); + } + return IRQ_HANDLED; } @@ -3334,6 +3339,8 @@ static int bcmgenet_probe(struct platfor goto err; } + spin_lock_init(&priv->lock); + SET_NETDEV_DEV(dev, &pdev->dev); dev_set_drvdata(&pdev->dev, dev); ether_addr_copy(dev->dev_addr, macaddr); --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -623,11 +623,13 @@ struct bcmgenet_priv { struct work_struct bcmgenet_irq_work; int irq0; int irq1; - unsigned int irq0_stat; - unsigned int irq1_stat; int wol_irq; bool wol_irq_disabled; + /* shared status */ + spinlock_t lock; + unsigned int irq0_stat; + /* HW descriptors/checksum variables */ bool desc_64b_en; bool desc_rxchk_en; Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch queue-4.9/net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch queue-4.9/net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch queue-4.9/net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch queue-4.9/net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch queue-4.9/net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: bcmgenet: reserved phy revisions must be checked first" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: bcmgenet: reserved phy revisions must be checked first to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Doug Berger <opendmb(a)gmail.com> Date: Thu, 9 Mar 2017 16:58:45 -0800 Subject: net: bcmgenet: reserved phy revisions must be checked first From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit eca4bad73409aedc6ff22f823c18b67a4f08c851 ] The reserved gphy_rev value of 0x01ff must be tested before the old or new scheme for GPHY major versioning are tested, otherwise it will be treated as 0xff00 according to the old scheme. Fixes: b04a2f5b9ff5 ("net: bcmgenet: add support for new GENET PHY revision scheme") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3233,6 +3233,12 @@ static void bcmgenet_set_hw_params(struc */ gphy_rev = reg & 0xffff; + /* This is reserved so should require special treatment */ + if (gphy_rev == 0 || gphy_rev == 0x01ff) { + pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev); + return; + } + /* This is the good old scheme, just GPHY major, no minor nor patch */ if ((gphy_rev & 0xf0) != 0) priv->gphy_rev = gphy_rev << 8; @@ -3241,12 +3247,6 @@ static void bcmgenet_set_hw_params(struc else if ((gphy_rev & 0xff00) != 0) priv->gphy_rev = gphy_rev; - /* This is reserved so should require special treatment */ - else if (gphy_rev == 0 || gphy_rev == 0x01ff) { - pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev); - return; - } - #ifdef CONFIG_PHYS_ADDR_T_64BIT if (!(params->flags & GENET_HAS_40BITS)) pr_warn("GENET does not support 40-bits PA\n"); Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch queue-4.9/net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch queue-4.9/net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch queue-4.9/net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch queue-4.9/net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch queue-4.9/net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: bcmgenet: Power up the internal PHY before probing the MII" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: bcmgenet: Power up the internal PHY before probing the MII to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Doug Berger <opendmb(a)gmail.com> Date: Thu, 9 Mar 2017 16:58:48 -0800 Subject: net: bcmgenet: Power up the internal PHY before probing the MII From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 6be371b053dc86f11465cc1abce2e99bda0a0574 ] When using the internal PHY it must be powered up when the MII is probed or the PHY will not be detected. Since the PHY is powered up at reset this has not been a problem. However, when the kernel is restarted with kexec the PHY will likely be powered down when the kernel starts so it will not be detected and the Ethernet link will not be established. This commit explicitly powers up the internal PHY when the GENET driver is probed to correct this behavior. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3296,6 +3296,7 @@ static int bcmgenet_probe(struct platfor const void *macaddr; struct resource *r; int err = -EIO; + const char *phy_mode_str; /* Up to GENET_MAX_MQ_CNT + 1 TX queues and RX queues */ dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1, @@ -3403,6 +3404,13 @@ static int bcmgenet_probe(struct platfor priv->clk_eee = NULL; } + /* If this is an internal GPHY, power it on now, before UniMAC is + * brought out of reset as absolutely no UniMAC activity is allowed + */ + if (dn && !of_property_read_string(dn, "phy-mode", &phy_mode_str) && + !strcasecmp(phy_mode_str, "internal")) + bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + err = reset_umac(priv); if (err) goto err_clk_disable; Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch queue-4.9/net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch queue-4.9/net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch queue-4.9/net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch queue-4.9/net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch queue-4.9/net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: bcmgenet: power down internal phy if open or resume fails" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: bcmgenet: power down internal phy if open or resume fails to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Doug Berger <opendmb(a)gmail.com> Date: Thu, 9 Mar 2017 16:58:46 -0800 Subject: net: bcmgenet: power down internal phy if open or resume fails From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 7627409cc4970e8c8b9de6945ad86a575290a94e ] Since the internal PHY is powered up during the open and resume functions it should be powered back down if the functions fail. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2857,6 +2857,8 @@ err_irq0: err_fini_dma: bcmgenet_fini_dma(priv); err_clk_disable: + if (priv->internal_phy) + bcmgenet_power_down(priv, GENET_POWER_PASSIVE); clk_disable_unprepare(priv->clk); return ret; } @@ -3560,6 +3562,8 @@ static int bcmgenet_resume(struct device return 0; out_clk_disable: + if (priv->internal_phy) + bcmgenet_power_down(priv, GENET_POWER_PASSIVE); clk_disable_unprepare(priv->clk); return ret; } Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch queue-4.9/net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch queue-4.9/net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch queue-4.9/net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch queue-4.9/net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch queue-4.9/net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Doug Berger <opendmb(a)gmail.com> Date: Thu, 9 Mar 2017 16:58:43 -0800 Subject: net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit ffff71328a3c321f7c14cc1edd33577717037744 ] The location of the RBUF overflow and error counters has moved between different version of the GENET MAC. This commit corrects the driver to read from the correct locations depending on the version of the GENET MAC. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 60 ++++++++++++++++++++++--- drivers/net/ethernet/broadcom/genet/bcmgenet.h | 10 ++-- 2 files changed, 60 insertions(+), 10 deletions(-) --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1,7 +1,7 @@ /* * Broadcom GENET (Gigabit Ethernet) controller driver * - * Copyright (c) 2014 Broadcom Corporation + * Copyright (c) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -778,8 +778,9 @@ static const struct bcmgenet_stats bcmge STAT_GENET_RUNT("rx_runt_bytes", mib.rx_runt_bytes), /* Misc UniMAC counters */ STAT_GENET_MISC("rbuf_ovflow_cnt", mib.rbuf_ovflow_cnt, - UMAC_RBUF_OVFL_CNT), - STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt, UMAC_RBUF_ERR_CNT), + UMAC_RBUF_OVFL_CNT_V1), + STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt, + UMAC_RBUF_ERR_CNT_V1), STAT_GENET_MISC("mdf_err_cnt", mib.mdf_err_cnt, UMAC_MDF_ERR_CNT), STAT_GENET_SOFT_MIB("alloc_rx_buff_failed", mib.alloc_rx_buff_failed), STAT_GENET_SOFT_MIB("rx_dma_failed", mib.rx_dma_failed), @@ -821,6 +822,45 @@ static void bcmgenet_get_strings(struct } } +static u32 bcmgenet_update_stat_misc(struct bcmgenet_priv *priv, u16 offset) +{ + u16 new_offset; + u32 val; + + switch (offset) { + case UMAC_RBUF_OVFL_CNT_V1: + if (GENET_IS_V2(priv)) + new_offset = RBUF_OVFL_CNT_V2; + else + new_offset = RBUF_OVFL_CNT_V3PLUS; + + val = bcmgenet_rbuf_readl(priv, new_offset); + /* clear if overflowed */ + if (val == ~0) + bcmgenet_rbuf_writel(priv, 0, new_offset); + break; + case UMAC_RBUF_ERR_CNT_V1: + if (GENET_IS_V2(priv)) + new_offset = RBUF_ERR_CNT_V2; + else + new_offset = RBUF_ERR_CNT_V3PLUS; + + val = bcmgenet_rbuf_readl(priv, new_offset); + /* clear if overflowed */ + if (val == ~0) + bcmgenet_rbuf_writel(priv, 0, new_offset); + break; + default: + val = bcmgenet_umac_readl(priv, offset); + /* clear if overflowed */ + if (val == ~0) + bcmgenet_umac_writel(priv, 0, offset); + break; + } + + return val; +} + static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv) { int i, j = 0; @@ -845,10 +885,16 @@ static void bcmgenet_update_mib_counters UMAC_MIB_START + j + offset); break; case BCMGENET_STAT_MISC: - val = bcmgenet_umac_readl(priv, s->reg_offset); - /* clear if overflowed */ - if (val == ~0) - bcmgenet_umac_writel(priv, 0, s->reg_offset); + if (GENET_IS_V1(priv)) { + val = bcmgenet_umac_readl(priv, s->reg_offset); + /* clear if overflowed */ + if (val == ~0) + bcmgenet_umac_writel(priv, 0, + s->reg_offset); + } else { + val = bcmgenet_update_stat_misc(priv, + s->reg_offset); + } break; } --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014 Broadcom Corporation + * Copyright (c) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -214,7 +214,9 @@ struct bcmgenet_mib_counters { #define MDIO_REG_SHIFT 16 #define MDIO_REG_MASK 0x1F -#define UMAC_RBUF_OVFL_CNT 0x61C +#define UMAC_RBUF_OVFL_CNT_V1 0x61C +#define RBUF_OVFL_CNT_V2 0x80 +#define RBUF_OVFL_CNT_V3PLUS 0x94 #define UMAC_MPD_CTRL 0x620 #define MPD_EN (1 << 0) @@ -224,7 +226,9 @@ struct bcmgenet_mib_counters { #define UMAC_MPD_PW_MS 0x624 #define UMAC_MPD_PW_LS 0x628 -#define UMAC_RBUF_ERR_CNT 0x634 +#define UMAC_RBUF_ERR_CNT_V1 0x634 +#define RBUF_ERR_CNT_V2 0x84 +#define RBUF_ERR_CNT_V3PLUS 0x98 #define UMAC_MDF_ERR_CNT 0x638 #define UMAC_MDF_CTRL 0x650 #define UMAC_MDF_ADDR 0x654 Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch queue-4.9/net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch queue-4.9/net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch queue-4.9/net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch queue-4.9/net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch queue-4.9/net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: bcmgenet: correct MIB access of UniMAC RUNT counters" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: bcmgenet: correct MIB access of UniMAC RUNT counters to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Doug Berger <opendmb(a)gmail.com> Date: Thu, 9 Mar 2017 16:58:44 -0800 Subject: net: bcmgenet: correct MIB access of UniMAC RUNT counters From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 1ad3d225e5a40ca6c586989b4baaca710544c15a ] The gap between the Tx status counters and the Rx RUNT counters is now being added to allow correct reporting of the registers. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -876,13 +876,16 @@ static void bcmgenet_update_mib_counters case BCMGENET_STAT_NETDEV: case BCMGENET_STAT_SOFT: continue; - case BCMGENET_STAT_MIB_RX: - case BCMGENET_STAT_MIB_TX: case BCMGENET_STAT_RUNT: - if (s->type != BCMGENET_STAT_MIB_RX) - offset = BCMGENET_STAT_OFFSET; + offset += BCMGENET_STAT_OFFSET; + /* fall through */ + case BCMGENET_STAT_MIB_TX: + offset += BCMGENET_STAT_OFFSET; + /* fall through */ + case BCMGENET_STAT_MIB_RX: val = bcmgenet_umac_readl(priv, UMAC_MIB_START + j + offset); + offset = 0; /* Reset Offset */ break; case BCMGENET_STAT_MISC: if (GENET_IS_V1(priv)) { Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/net-bcmgenet-synchronize-irq0-status-between-the-isr-and-task.patch queue-4.9/net-bcmgenet-correct-the-rbuf_ovfl_cnt-and-rbuf_err_cnt-mib-values.patch queue-4.9/net-bcmgenet-correct-mib-access-of-unimac-runt-counters.patch queue-4.9/net-bcmgenet-power-down-internal-phy-if-open-or-resume-fails.patch queue-4.9/net-bcmgenet-reserved-phy-revisions-must-be-checked-first.patch queue-4.9/net-bcmgenet-power-up-the-internal-phy-before-probing-the-mii.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mmc: mediatek: Fixed bug where clock frequency could be set wrong" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mmc: mediatek: Fixed bug where clock frequency could be set wrong to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mmc-mediatek-fixed-bug-where-clock-frequency-could-be-set-wrong.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: yong mao <yong.mao(a)mediatek.com> Date: Sat, 4 Mar 2017 15:10:03 +0800 Subject: mmc: mediatek: Fixed bug where clock frequency could be set wrong From: yong mao <yong.mao(a)mediatek.com> [ Upstream commit 40ceda09c8c84694c2ca6b00bcc6dc71e8e62d96 ] This patch can fix two issues: Issue 1: In previous code, div may be overflow when setting clock frequency as f_min. We can use DIV_ROUND_UP to fix this boundary related issue. Issue 2: In previous code, we can not set the correct clock frequency when div equals 0xff. Signed-off-by: Yong Mao <yong.mao(a)mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing(a)mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz(a)chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/mtk-sd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -579,7 +579,7 @@ static void msdc_set_mclk(struct msdc_ho } } sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV, - (mode << 8) | (div % 0xff)); + (mode << 8) | div); sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN); while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB)) cpu_relax(); @@ -1562,7 +1562,7 @@ static int msdc_drv_probe(struct platfor host->src_clk_freq = clk_get_rate(host->src_clk); /* Set host parameters to mmc */ mmc->ops = &mt_msdc_ops; - mmc->f_min = host->src_clk_freq / (4 * 255); + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255); mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23; /* MMC core transfer sizes tunable parameters */ Patches currently in stable-queue which might be from yong.mao(a)mediatek.com are queue-4.9/mmc-mediatek-fixed-bug-where-clock-frequency-could-be-set-wrong.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mm: Handle 0 flags in _calc_vm_trans() macro" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mm: Handle 0 flags in _calc_vm_trans() macro to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mm-handle-0-flags-in-_calc_vm_trans-macro.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Jan Kara <jack(a)suse.cz> Date: Fri, 3 Nov 2017 12:21:21 +0100 Subject: mm: Handle 0 flags in _calc_vm_trans() macro From: Jan Kara <jack(a)suse.cz> [ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ] _calc_vm_trans() does not handle the situation when some of the passed flags are 0 (which can happen if these VM flags do not make sense for the architecture). Improve the _calc_vm_trans() macro to return 0 in such situation. Since all passed flags are constant, this does not add any runtime overhead. Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/mman.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -63,8 +63,9 @@ static inline bool arch_validate_prot(un * ("bit1" and "bit2" must be single bits) */ #define _calc_vm_trans(x, bit1, bit2) \ + ((!(bit1) || !(bit2)) ? 0 : \ ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \ - : ((x) & (bit1)) / ((bit1) / (bit2))) + : ((x) & (bit1)) / ((bit1) / (bit2)))) /* * Combine the mmap "prot" argument into "vm_flags" used internally. Patches currently in stable-queue which might be from jack(a)suse.cz are queue-4.9/writeback-fix-memory-leak-in-wb_queue_work.patch queue-4.9/mm-handle-0-flags-in-_calc_vm_trans-macro.patch queue-4.9/udf-avoid-overflow-when-session-starts-at-large-offset.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mlxsw: reg: Fix SPVMLR max record count" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mlxsw: reg: Fix SPVMLR max record count to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mlxsw-reg-fix-spvmlr-max-record-count.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Jiri Pirko <jiri(a)mellanox.com> Date: Tue, 14 Mar 2017 14:00:01 +0100 Subject: mlxsw: reg: Fix SPVMLR max record count From: Jiri Pirko <jiri(a)mellanox.com> [ Upstream commit e9093b1183bbac462d2caef3eac165778c0b1bf1 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by: Jiri Pirko <jiri(a)mellanox.com> Reviewed-by: Ido Schimmel <idosch(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -1757,7 +1757,7 @@ static inline void mlxsw_reg_sfmr_pack(c #define MLXSW_REG_SPVMLR_ID 0x2020 #define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */ #define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */ -#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 256 +#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 255 #define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \ MLXSW_REG_SPVMLR_REC_LEN * \ MLXSW_REG_SPVMLR_REC_MAX_COUNT) Patches currently in stable-queue which might be from jiri(a)mellanox.com are queue-4.9/mlxsw-reg-fix-spvmlr-max-record-count.patch queue-4.9/mlxsw-reg-fix-spvm-max-record-count.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mlxsw: reg: Fix SPVM max record count" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mlxsw: reg: Fix SPVM max record count to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mlxsw-reg-fix-spvm-max-record-count.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Jiri Pirko <jiri(a)mellanox.com> Date: Tue, 14 Mar 2017 14:00:00 +0100 Subject: mlxsw: reg: Fix SPVM max record count From: Jiri Pirko <jiri(a)mellanox.com> [ Upstream commit f004ec065b4879d6bc9ba0211af2169b3ce3097f ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by: Jiri Pirko <jiri(a)mellanox.com> Reviewed-by: Ido Schimmel <idosch(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -788,7 +788,7 @@ static inline void mlxsw_reg_spvid_pack( #define MLXSW_REG_SPVM_ID 0x200F #define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */ #define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */ -#define MLXSW_REG_SPVM_REC_MAX_COUNT 256 +#define MLXSW_REG_SPVM_REC_MAX_COUNT 255 #define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN + \ MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT) Patches currently in stable-queue which might be from jiri(a)mellanox.com are queue-4.9/mlxsw-reg-fix-spvmlr-max-record-count.patch queue-4.9/mlxsw-reg-fix-spvm-max-record-count.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "md-cluster: free md_cluster_info if node leave cluster" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled md-cluster: free md_cluster_info if node leave cluster to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: md-cluster-free-md_cluster_info-if-node-leave-cluster.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Guoqing Jiang <gqjiang(a)suse.com> Date: Fri, 24 Feb 2017 11:15:12 +0800 Subject: md-cluster: free md_cluster_info if node leave cluster From: Guoqing Jiang <gqjiang(a)suse.com> [ Upstream commit 9c8043f337f14d1743006dfc59c03e80a42e3884 ] To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Guoqing Jiang <gqjiang(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/md-cluster.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/md/md-cluster.c +++ b/drivers/md/md-cluster.c @@ -974,6 +974,7 @@ static int leave(struct mddev *mddev) lockres_free(cinfo->bitmap_lockres); unlock_all_bitmaps(mddev); dlm_release_lockspace(cinfo->lockspace, 2); + kfree(cinfo); return 0; } Patches currently in stable-queue which might be from gqjiang(a)suse.com are queue-4.9/md-cluster-free-md_cluster_info-if-node-leave-cluster.patch queue-4.9/badblocks-fix-wrong-return-value-in-badblocks_set-if-badblocks-are-disabled.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "macvlan: Only deliver one copy of the frame to the macvlan interface" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled macvlan: Only deliver one copy of the frame to the macvlan interface to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: macvlan-only-deliver-one-copy-of-the-frame-to-the-macvlan-interface.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Alexander Duyck <alexander.h.duyck(a)intel.com> Date: Fri, 13 Oct 2017 13:40:24 -0700 Subject: macvlan: Only deliver one copy of the frame to the macvlan interface From: Alexander Duyck <alexander.h.duyck(a)intel.com> [ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ] This patch intoduces a slight adjustment for macvlan to address the fact that in source mode I was seeing two copies of any packet addressed to the macvlan interface being delivered where there should have been only one. The issue appears to be that one copy was delivered based on the source MAC address and then the second copy was being delivered based on the destination MAC address. To fix it I am just treating a unicast address match as though it is not a match since source based macvlan isn't supposed to be matching based on the destination MAC anyway. Fixes: 79cf79abce71 ("macvlan: add source mode") Signed-off-by: Alexander Duyck <alexander.h.duyck(a)intel.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/macvlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -452,7 +452,7 @@ static rx_handler_result_t macvlan_handl struct macvlan_dev, list); else vlan = macvlan_hash_lookup(port, eth->h_dest); - if (vlan == NULL) + if (!vlan || vlan->mode == MACVLAN_MODE_SOURCE) return RX_HANDLER_PASS; dev = vlan->dev; Patches currently in stable-queue which might be from alexander.h.duyck(a)intel.com are queue-4.9/macvlan-only-deliver-one-copy-of-the-frame-to-the-macvlan-interface.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "l2tp: cleanup l2tp_tunnel_delete calls" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled l2tp: cleanup l2tp_tunnel_delete calls to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: l2tp-cleanup-l2tp_tunnel_delete-calls.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Jiri Slaby <jslaby(a)suse.cz> Date: Wed, 25 Oct 2017 15:57:55 +0200 Subject: l2tp: cleanup l2tp_tunnel_delete calls From: Jiri Slaby <jslaby(a)suse.cz> [ Upstream commit 4dc12ffeaeac939097a3f55c881d3dc3523dff0c ] l2tp_tunnel_delete does not return anything since commit 62b982eeb458 ("l2tp: fix race condition in l2tp_tunnel_delete"). But call sites of l2tp_tunnel_delete still do casts to void to avoid unused return value warnings. Kill these now useless casts. Signed-off-by: Jiri Slaby <jslaby(a)suse.cz> Cc: Sabrina Dubroca <sd(a)queasysnail.net> Cc: Guillaume Nault <g.nault(a)alphalink.fr> Cc: David S. Miller <davem(a)davemloft.net> Cc: netdev(a)vger.kernel.org Acked-by: Guillaume Nault <g.nault(a)alphalink.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/l2tp/l2tp_core.c | 2 +- net/l2tp/l2tp_netlink.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1944,7 +1944,7 @@ static __net_exit void l2tp_exit_net(str rcu_read_lock_bh(); list_for_each_entry_rcu(tunnel, &pn->l2tp_tunnel_list, list) { - (void)l2tp_tunnel_delete(tunnel); + l2tp_tunnel_delete(tunnel); } rcu_read_unlock_bh(); --- a/net/l2tp/l2tp_netlink.c +++ b/net/l2tp/l2tp_netlink.c @@ -287,7 +287,7 @@ static int l2tp_nl_cmd_tunnel_delete(str l2tp_tunnel_notify(&l2tp_nl_family, info, tunnel, L2TP_CMD_TUNNEL_DELETE); - (void) l2tp_tunnel_delete(tunnel); + l2tp_tunnel_delete(tunnel); out: return ret; Patches currently in stable-queue which might be from jslaby(a)suse.cz are queue-4.9/l2tp-cleanup-l2tp_tunnel_delete-calls.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: nVMX: do not warn when MSR bitmap address is not backed" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: nVMX: do not warn when MSR bitmap address is not backed to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-nvmx-do-not-warn-when-msr-bitmap-address-is-not-backed.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Radim Krčmář <rkrcmar(a)redhat.com> Date: Tue, 7 Mar 2017 17:51:49 +0100 Subject: KVM: nVMX: do not warn when MSR bitmap address is not backed From: Radim Krčmář <rkrcmar(a)redhat.com> [ Upstream commit 05d8d34611139f8435af90ac54b65eb31e82e388 ] Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(), we have already checked that the MSR bitmap address is valid (4k aligned and within physical limits). SDM doesn't specify what happens if the there is no memory mapped at the valid address, but Intel CPUs treat the situation as if the bitmap was configured to trap all MSRs. KVM already does that by returning false and a correct handling doesn't need the guest-trigerrable warning that was reported by syzkaller: (The warning was originally there to catch some possible bugs in nVMX.) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline] nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561 handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312 vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526 vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline] vcpu_run arch/x86/kvm/x86.c:7044 [inline] kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205 kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570 Reported-by: Dmitry Vyukov <dvyukov(a)google.com> Reviewed-by: Jim Mattson <jmattson(a)google.com> [Jim Mattson explained the bare metal behavior: "I believe this behavior would be documented in the chipset data sheet rather than the SDM, since the chipset returns all 1s for an unclaimed read."] Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/vmx.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -9543,10 +9543,8 @@ static inline bool nested_vmx_merge_msr_ return false; page = nested_get_page(vcpu, vmcs12->msr_bitmap); - if (!page) { - WARN_ON(1); + if (!page) return false; - } msr_bitmap_l1 = (unsigned long *)kmap(page); if (!msr_bitmap_l1) { nested_release_page_clean(page); Patches currently in stable-queue which might be from rkrcmar(a)redhat.com are queue-4.9/kvm-nvmx-do-not-warn-when-msr-bitmap-address-is-not-backed.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iwlwifi: mvm: cleanup pending frames in DQA mode" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iwlwifi: mvm: cleanup pending frames in DQA mode to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iwlwifi-mvm-cleanup-pending-frames-in-dqa-mode.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Sara Sharon <sara.sharon(a)intel.com> Date: Tue, 14 Mar 2017 09:50:35 +0200 Subject: iwlwifi: mvm: cleanup pending frames in DQA mode From: Sara Sharon <sara.sharon(a)intel.com> [ Upstream commit 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ] When a station is asleep, the fw will set it as "asleep". All queues that are used only by one station will be stopped by the fw. In pre-DQA mode this was relevant for aggregation queues. However, in DQA mode a queue is owned by one station only, so all queues will be stopped. As a result, we don't expect to get filtered frames back to mac80211 and don't have to maintain the entire pending_frames state logic, the same way as we do in aggregations. The correct behavior is to align DQA behavior with the aggregation queue behaviour pre-DQA: - Don't count pending frames. - Let mac80211 know we have frames in these queues so that it can properly handle trigger frames. When a trigger frame is received, mac80211 tells the driver to send frames from the queues using release_buffered_frames. The driver will tell the fw to let frames out even if the station is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count. Reported-and-tested-by: Jens Axboe <axboe(a)kernel.dk> Reported-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sara Sharon <sara.sharon(a)intel.com> Signed-off-by: Luca Coelho <luciano.coelho(a)intel.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 11 +++-- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 - drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 41 +++++++++------------- 4 files changed, 28 insertions(+), 31 deletions(-) --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -2320,7 +2320,7 @@ iwl_mvm_mac_release_buffered_frames(stru { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); - /* Called when we need to transmit (a) frame(s) from agg queue */ + /* Called when we need to transmit (a) frame(s) from agg or dqa queue */ iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames, tids, more_data, true); @@ -2340,7 +2340,8 @@ static void iwl_mvm_mac_sta_notify(struc for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) { struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; - if (tid_data->state != IWL_AGG_ON && + if (!iwl_mvm_is_dqa_supported(mvm) && + tid_data->state != IWL_AGG_ON && tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA) continue; --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -3032,7 +3032,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt, u16 tids, bool more_data, - bool agg) + bool single_sta_queue) { struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); struct iwl_mvm_add_sta_cmd cmd = { @@ -3052,14 +3052,14 @@ void iwl_mvm_sta_modify_sleep_tx_count(s for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT) cmd.awake_acs |= BIT(tid_to_ucode_ac[tid]); - /* If we're releasing frames from aggregation queues then check if the - * all queues combined that we're releasing frames from have + /* If we're releasing frames from aggregation or dqa queues then check + * if all the queues that we're releasing frames from, combined, have: * - more frames than the service period, in which case more_data * needs to be set * - fewer than 'cnt' frames, in which case we need to adjust the * firmware command (but do that unconditionally) */ - if (agg) { + if (single_sta_queue) { int remaining = cnt; int sleep_tx_count; @@ -3069,7 +3069,8 @@ void iwl_mvm_sta_modify_sleep_tx_count(s u16 n_queued; tid_data = &mvmsta->tid_data[tid]; - if (WARN(tid_data->state != IWL_AGG_ON && + if (WARN(!iwl_mvm_is_dqa_supported(mvm) && + tid_data->state != IWL_AGG_ON && tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA, "TID %d state is %d\n", tid, tid_data->state)) { --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -545,7 +545,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt, u16 tids, bool more_data, - bool agg); + bool single_sta_queue); int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool drain); void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm, --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -7,7 +7,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * Copyright(c) 2016 Intel Deutschland GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -34,6 +34,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -621,8 +622,10 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mv * values. * Note that we don't need to make sure it isn't agg'd, since we're * TXing non-sta + * For DQA mode - we shouldn't increase it though */ - atomic_inc(&mvm->pending_frames[sta_id]); + if (!iwl_mvm_is_dqa_supported(mvm)) + atomic_inc(&mvm->pending_frames[sta_id]); return 0; } @@ -1009,11 +1012,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mv spin_unlock(&mvmsta->lock); - /* Increase pending frames count if this isn't AMPDU */ - if ((iwl_mvm_is_dqa_supported(mvm) && - mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_ON && - mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_STARTING) || - (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu)) + /* Increase pending frames count if this isn't AMPDU or DQA queue */ + if (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu) atomic_inc(&mvm->pending_frames[mvmsta->sta_id]); return 0; @@ -1083,12 +1083,13 @@ static void iwl_mvm_check_ratid_empty(st lockdep_assert_held(&mvmsta->lock); if ((tid_data->state == IWL_AGG_ON || - tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA) && + tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA || + iwl_mvm_is_dqa_supported(mvm)) && iwl_mvm_tid_queued(tid_data) == 0) { /* - * Now that this aggregation queue is empty tell mac80211 so it - * knows we no longer have frames buffered for the station on - * this TID (for the TIM bitmap calculation.) + * Now that this aggregation or DQA queue is empty tell + * mac80211 so it knows we no longer have frames buffered for + * the station on this TID (for the TIM bitmap calculation.) */ ieee80211_sta_set_buffered(sta, tid, false); } @@ -1261,7 +1262,6 @@ static void iwl_mvm_rx_tx_cmd_single(str u8 skb_freed = 0; u16 next_reclaimed, seq_ctl; bool is_ndp = false; - bool txq_agg = false; /* Is this TXQ aggregated */ __skb_queue_head_init(&skbs); @@ -1287,6 +1287,10 @@ static void iwl_mvm_rx_tx_cmd_single(str info->flags |= IEEE80211_TX_STAT_ACK; break; case TX_STATUS_FAIL_DEST_PS: + /* In DQA, the FW should have stopped the queue and not + * return this status + */ + WARN_ON(iwl_mvm_is_dqa_supported(mvm)); info->flags |= IEEE80211_TX_STAT_TX_FILTERED; break; default: @@ -1391,15 +1395,6 @@ static void iwl_mvm_rx_tx_cmd_single(str bool send_eosp_ndp = false; spin_lock_bh(&mvmsta->lock); - if (iwl_mvm_is_dqa_supported(mvm)) { - enum iwl_mvm_agg_state state; - - state = mvmsta->tid_data[tid].state; - txq_agg = (state == IWL_AGG_ON || - state == IWL_EMPTYING_HW_QUEUE_DELBA); - } else { - txq_agg = txq_id >= mvm->first_agg_queue; - } if (!is_ndp) { tid_data->next_reclaimed = next_reclaimed; @@ -1456,11 +1451,11 @@ static void iwl_mvm_rx_tx_cmd_single(str * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... */ - if (txq_agg) + if (iwl_mvm_is_dqa_supported(mvm) || txq_id >= mvm->first_agg_queue) goto out; /* We can't free more than one frame at once on a shared queue */ - WARN_ON(!iwl_mvm_is_dqa_supported(mvm) && (skb_freed > 1)); + WARN_ON(skb_freed > 1); /* If we have still frames for this STA nothing to do here */ if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) Patches currently in stable-queue which might be from sara.sharon(a)intel.com are queue-4.9/iwlwifi-mvm-cleanup-pending-frames-in-dqa-mode.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iscsi-target: fix memory leak in lio_target_tiqn_addtpg()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iscsi-target: fix memory leak in lio_target_tiqn_addtpg() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iscsi-target-fix-memory-leak-in-lio_target_tiqn_addtpg.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: tangwenji <tang.wenji(a)zte.com.cn> Date: Fri, 15 Sep 2017 16:03:13 +0800 Subject: iscsi-target: fix memory leak in lio_target_tiqn_addtpg() From: tangwenji <tang.wenji(a)zte.com.cn> [ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ] tpg must free when call core_tpg_register() return fail Signed-off-by: tangwenji <tang.wenji(a)zte.com.cn> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/iscsi/iscsi_target_configfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -1144,7 +1144,7 @@ static struct se_portal_group *lio_targe ret = core_tpg_register(wwn, &tpg->tpg_se_tpg, SCSI_PROTOCOL_ISCSI); if (ret < 0) - return NULL; + goto free_out; ret = iscsit_tpg_add_portal_group(tiqn, tpg); if (ret != 0) @@ -1156,6 +1156,7 @@ static struct se_portal_group *lio_targe return &tpg->tpg_se_tpg; out: core_tpg_deregister(&tpg->tpg_se_tpg); +free_out: kfree(tpg); return NULL; } Patches currently in stable-queue which might be from tang.wenji(a)zte.com.cn are queue-4.9/target-fix-condition-return-in-core_pr_dump_initiator_port.patch queue-4.9/iscsi-target-fix-memory-leak-in-lio_target_tiqn_addtpg.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: irqchip-mvebu-odmi-select-generic_msi_irq_domain.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Arnd Bergmann <arnd(a)arndb.de> Date: Tue, 14 Mar 2017 13:54:12 +0100 Subject: irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN From: Arnd Bergmann <arnd(a)arndb.de> [ Upstream commit fa23b9d1b89fdc34f296f02e496a20aeff5736be ] This driver uses the MSI domain but has no strict dependency on PCI_MSI, so we may run into a build failure when CONFIG_GENERIC_MSI_IRQ_DOMAIN is disabled: drivers/irqchip/irq-mvebu-odmi.c:152:15: error: variable 'odmi_msi_ops' has initializer but incomplete type static struct msi_domain_ops odmi_msi_ops = { ^~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:155:15: error: variable 'odmi_msi_domain_info' has initializer but incomplete type static struct msi_domain_info odmi_msi_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:3: error: 'struct msi_domain_info' has no member named 'flags' .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ^~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/irqchip/irq-mvebu-odmi.c:156:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function); did you mean 'MSI_FLAG_USE_DEF_DOM_OPS'? Selecting the option from this driver seems to solve this nicely, though I could not find any other instance of this in irqchip drivers. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Acked-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/irqchip/Kconfig | 1 + 1 file changed, 1 insertion(+) --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -258,6 +258,7 @@ config IRQ_MXS config MVEBU_ODMI bool + select GENERIC_MSI_IRQ_DOMAIN config MVEBU_PIC bool Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.9/irqchip-mvebu-odmi-select-generic_msi_irq_domain.patch queue-4.9/drm-amd-remove-broken-include-path.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iommu/mediatek: Fix driver name" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/mediatek: Fix driver name to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-mediatek-fix-driver-name.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Matthias Brugger <matthias.bgg(a)gmail.com> Date: Mon, 30 Oct 2017 12:37:55 +0100 Subject: iommu/mediatek: Fix driver name From: Matthias Brugger <matthias.bgg(a)gmail.com> [ Upstream commit 395df08d2e1de238a9c8c33fdcd0e2160efd63a9 ] There exist two Mediatek iommu drivers for the two different generations of the device. But both drivers have the same name "mtk-iommu". This breaks the registration of the second driver: Error: Driver 'mtk-iommu' is already registered, aborting... Fix this by changing the name for first generation to "mtk-iommu-v1". Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW") Signed-off-by: Matthias Brugger <matthias.bgg(a)gmail.com> Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/mtk_iommu_v1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/iommu/mtk_iommu_v1.c +++ b/drivers/iommu/mtk_iommu_v1.c @@ -703,7 +703,7 @@ static struct platform_driver mtk_iommu_ .probe = mtk_iommu_probe, .remove = mtk_iommu_remove, .driver = { - .name = "mtk-iommu", + .name = "mtk-iommu-v1", .of_match_table = mtk_iommu_of_ids, .pm = &mtk_iommu_pm_ops, } Patches currently in stable-queue which might be from matthias.bgg(a)gmail.com are queue-4.9/soc-mediatek-pwrap-fix-compiler-errors.patch queue-4.9/iommu-mediatek-fix-driver-name.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-io-pgtable-arm-v7s-check-for-leaf-entry-before-dereferencing-it.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Oleksandr Tyshchenko <oleksandr_tyshchenko(a)epam.com> Date: Mon, 27 Feb 2017 14:30:26 +0200 Subject: iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it From: Oleksandr Tyshchenko <oleksandr_tyshchenko(a)epam.com> [ Upstream commit a03849e7210277fa212779b7cd9c30e1ab6194b2 ] Do a check for already installed leaf entry at the current level before dereferencing it in order to avoid walking the page table down with wrong pointer to the next level. Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko(a)epam.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Robin Murphy <robin.murphy(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/io-pgtable-arm-v7s.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/iommu/io-pgtable-arm-v7s.c +++ b/drivers/iommu/io-pgtable-arm-v7s.c @@ -418,8 +418,12 @@ static int __arm_v7s_map(struct arm_v7s_ pte |= ARM_V7S_ATTR_NS_TABLE; __arm_v7s_set_pte(ptep, pte, 1, cfg); - } else { + } else if (ARM_V7S_PTE_IS_TABLE(pte, lvl)) { cptep = iopte_deref(pte, lvl); + } else { + /* We require an unmap first */ + WARN_ON(!selftest_running); + return -EEXIST; } /* Rinse, repeat */ Patches currently in stable-queue which might be from oleksandr_tyshchenko(a)epam.com are queue-4.9/iommu-io-pgtable-arm-v7s-check-for-leaf-entry-before-dereferencing-it.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iommu/amd: Limit the IOVA page range to the specified addresses" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/amd: Limit the IOVA page range to the specified addresses to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-amd-limit-the-iova-page-range-to-the-specified-addresses.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Gary R Hook <gary.hook(a)amd.com> Date: Fri, 3 Nov 2017 10:50:34 -0600 Subject: iommu/amd: Limit the IOVA page range to the specified addresses From: Gary R Hook <gary.hook(a)amd.com> [ Upstream commit b92b4fb5c14257c0e7eae291ecc1f7b1962e1699 ] The extent of pages specified when applying a reserved region should include up to the last page of the range, but not the page following the range. Signed-off-by: Gary R Hook <gary.hook(a)amd.com> Fixes: 8d54d6c8b8f3 ('iommu/amd: Implement apply_dm_region call-back') Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -3211,7 +3211,7 @@ static void amd_iommu_apply_dm_region(st unsigned long start, end; start = IOVA_PFN(region->start); - end = IOVA_PFN(region->start + region->length); + end = IOVA_PFN(region->start + region->length - 1); WARN_ON_ONCE(reserve_iova(&dma_dom->iovad, start, end) == NULL); } Patches currently in stable-queue which might be from gary.hook(a)amd.com are queue-4.9/iommu-amd-limit-the-iova-page-range-to-the-specified-addresses.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "intel_th: pci: Add Gemini Lake support" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled intel_th: pci: Add Gemini Lake support to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: intel_th-pci-add-gemini-lake-support.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Date: Thu, 30 Jun 2016 16:10:51 +0300 Subject: intel_th: pci: Add Gemini Lake support From: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> [ Upstream commit 340837f985c2cb87ca0868d4aa9ce42b0fab3a21 ] This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC. Signed-off-by: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -95,6 +95,11 @@ static const struct pci_device_id intel_ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9da6), .driver_data = (kernel_ulong_t)0, }, + { + /* Gemini Lake */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x318e), + .driver_data = (kernel_ulong_t)0, + }, { 0 }, }; Patches currently in stable-queue which might be from alexander.shishkin(a)linux.intel.com are queue-4.9/intel_th-pci-add-gemini-lake-support.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-i8042-add-tuxedo-bu1406-n24_25bu-to-the-nomux-list.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Date: Tue, 28 Feb 2017 17:14:41 -0800 Subject: Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> [ Upstream commit a4c2a13129f7c5bcf81704c06851601593303fd5 ] TUXEDO BU1406 does not implement active multiplexing mode properly, and takes around 550 ms in i8042_set_mux_mode(). Given that the device does not have external AUX port, there is no downside in disabling the MUX mode. Reported-by: Paul Menzel <pmenzel(a)molgen.mpg.de> Suggested-by: Vojtech Pavlik <vojtech(a)suse.cz> Reviewed-by: Marcos Paulo de Souza <marcos.souza.org(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -520,6 +520,13 @@ static const struct dmi_system_id __init DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"), }, }, + { + /* TUXEDO BU1406 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Notebook"), + DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"), + }, + }, { } }; Patches currently in stable-queue which might be from dmitry.torokhov(a)gmail.com are queue-4.9/input-i8042-add-tuxedo-bu1406-n24_25bu-to-the-nomux-list.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "icmp: don't fail on fragment reassembly time exceeded" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled icmp: don't fail on fragment reassembly time exceeded to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: icmp-don-t-fail-on-fragment-reassembly-time-exceeded.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Matteo Croce <mcroce(a)redhat.com> Date: Thu, 12 Oct 2017 16:12:37 +0200 Subject: icmp: don't fail on fragment reassembly time exceeded From: Matteo Croce <mcroce(a)redhat.com> [ Upstream commit 258bbb1b0e594ad5f5652cb526b3c63e6a7fad3d ] The ICMP implementation currently replies to an ICMP time exceeded message (type 11) with an ICMP host unreachable message (type 3, code 1). However, time exceeded messages can either represent "time to live exceeded in transit" (code 0) or "fragment reassembly time exceeded" (code 1). Unconditionally replying to "fragment reassembly time exceeded" with host unreachable messages might cause unjustified connection resets which are now easily triggered as UFO has been removed, because, in turn, sending large buffers triggers IP fragmentation. The issue can be easily reproduced by running a lot of UDP streams which is likely to trigger IP fragmentation: # start netserver in the test namespace ip netns add test ip netns exec test netserver # create a VETH pair ip link add name veth0 type veth peer name veth0 netns test ip link set veth0 up ip -n test link set veth0 up for i in $(seq 20 29); do # assign addresses to both ends ip addr add dev veth0 192.168.$i.1/24 ip -n test addr add dev veth0 192.168.$i.2/24 # start the traffic netperf -L 192.168.$i.1 -H 192.168.$i.2 -t UDP_STREAM -l 0 & done # wait send_data: data send error: No route to host (errno 113) netperf: send_omni: send_data failed: No route to host We need to differentiate instead: if fragment reassembly time exceeded is reported, we need to silently drop the packet, if time to live exceeded is reported, maintain the current behaviour. In both cases increment the related error count "icmpInTimeExcds". While at it, fix a typo in a comment, and convert the if statement into a switch to mate it more readable. Signed-off-by: Matteo Croce <mcroce(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/icmp.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -766,7 +766,7 @@ static bool icmp_tag_validation(int prot } /* - * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, ICMP_QUENCH, and + * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEEDED, ICMP_QUENCH, and * ICMP_PARAMETERPROB. */ @@ -794,7 +794,8 @@ static bool icmp_unreach(struct sk_buff if (iph->ihl < 5) /* Mangled header, drop. */ goto out_err; - if (icmph->type == ICMP_DEST_UNREACH) { + switch (icmph->type) { + case ICMP_DEST_UNREACH: switch (icmph->code & 15) { case ICMP_NET_UNREACH: case ICMP_HOST_UNREACH: @@ -830,8 +831,16 @@ static bool icmp_unreach(struct sk_buff } if (icmph->code > NR_ICMP_UNREACH) goto out; - } else if (icmph->type == ICMP_PARAMETERPROB) + break; + case ICMP_PARAMETERPROB: info = ntohl(icmph->un.gateway) >> 24; + break; + case ICMP_TIME_EXCEEDED: + __ICMP_INC_STATS(net, ICMP_MIB_INTIMEEXCDS); + if (icmph->code == ICMP_EXC_FRAGTIME) + goto out; + break; + } /* * Throw it at our lower layers Patches currently in stable-queue which might be from mcroce(a)redhat.com are queue-4.9/icmp-don-t-fail-on-fragment-reassembly-time-exceeded.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-grab-rtnl-lock-on-heavy-flush-when-calling-ndo_open-stop.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Alex Vesker <valex(a)mellanox.com> Date: Tue, 10 Oct 2017 10:36:41 +0300 Subject: IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop From: Alex Vesker <valex(a)mellanox.com> [ Upstream commit b4b678b06f6eef18bff44a338c01870234db0bc9 ] When ndo_open and ndo_stop are called RTNL lock should be held. In this specific case ipoib_ib_dev_open calls the offloaded ndo_open which re-sets the number of TX queue assuming RTNL lock is held. Since RTNL lock is not held, RTNL assert will fail. Signed-off-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -1177,10 +1177,15 @@ static void __ipoib_ib_dev_flush(struct ipoib_ib_dev_down(dev); if (level == IPOIB_FLUSH_HEAVY) { + rtnl_lock(); if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) ipoib_ib_dev_stop(dev); - if (ipoib_ib_dev_open(dev) != 0) + + result = ipoib_ib_dev_open(dev); + rtnl_unlock(); + if (result) return; + if (netif_queue_stopped(dev)) netif_start_queue(dev); } Patches currently in stable-queue which might be from valex(a)mellanox.com are queue-4.9/ib-ipoib-grab-rtnl-lock-on-heavy-flush-when-calling-ndo_open-stop.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "Ib/hfi1: Return actual operational VLs in port info query" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Ib/hfi1: Return actual operational VLs in port info query to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-hfi1-return-actual-operational-vls-in-port-info-query.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Patel Jay P <jay.p.patel(a)intel.com> Date: Mon, 23 Oct 2017 06:05:53 -0700 Subject: Ib/hfi1: Return actual operational VLs in port info query From: Patel Jay P <jay.p.patel(a)intel.com> [ Upstream commit 00f9203119dd2774564407c7a67b17d81916298b ] __subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as operational vls. hfi1_get_ib_cfg() returns vls_operational field in hfi1_pportdata. The problem with this is that the value is always equal to vls_supported field in hfi1_pportdata. The logic to calculate operational_vls is to set value passed by FM (in __subn_set_opa_portinfo routine). If no value is passed then default value is stored in operational_vls. Field actual_vls_operational is calculated on the basis of buffer control table. Hence, modifying hfi1_get_ib_cfg() to return actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter Reviewed-by: Mike Marciniszyn <mike.marciniszyn(a)intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro(a)intel.com> Signed-off-by: Patel Jay P <jay.p.patel(a)intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro(a)intel.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/hfi1/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -9769,7 +9769,7 @@ int hfi1_get_ib_cfg(struct hfi1_pportdat goto unimplemented; case HFI1_IB_CFG_OP_VLS: - val = ppd->vls_operational; + val = ppd->actual_vls_operational; break; case HFI1_IB_CFG_VL_HIGH_CAP: /* VL arb high priority table size */ val = VL_ARB_HIGH_PRIO_TABLE_SIZE; Patches currently in stable-queue which might be from jay.p.patel(a)intel.com are queue-4.9/ib-hfi1-return-actual-operational-vls-in-port-info-query.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "IB/core: Fix calculation of maximum RoCE MTU" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/core: Fix calculation of maximum RoCE MTU to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-core-fix-calculation-of-maximum-roce-mtu.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Parav Pandit <parav(a)mellanox.com> Date: Mon, 16 Oct 2017 08:45:16 +0300 Subject: IB/core: Fix calculation of maximum RoCE MTU From: Parav Pandit <parav(a)mellanox.com> [ Upstream commit 99260132fde7bddc6e0132ce53da94d1c9ccabcb ] The original code only took into consideration the largest header possible after the IB_BTH_BYTES. This was incorrect, as the largest possible header size is the largest possible combination of headers we might run into. The new code accounts for all possible headers in the largest possible combination and subtracts that from the MTU to make sure that all packets will fit on the wire. Link: https://www.spinics.net/lists/linux-rdma/msg54558.html Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices") Signed-off-by: Parav Pandit <parav(a)mellanox.com> Reviewed-by: Daniel Jurgens <danielj(a)mellanox.com> Reported-by: Roland Dreier <roland(a)purestorage.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/rdma/ib_addr.h | 7 ++++--- include/rdma/ib_pack.h | 19 +++++++++++-------- 2 files changed, 15 insertions(+), 11 deletions(-) --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -243,10 +243,11 @@ static inline void rdma_addr_set_dgid(st static inline enum ib_mtu iboe_get_mtu(int mtu) { /* - * reduce IB headers from effective IBoE MTU. 28 stands for - * atomic header which is the biggest possible header after BTH + * Reduce IB headers from effective IBoE MTU. */ - mtu = mtu - IB_GRH_BYTES - IB_BTH_BYTES - 28; + mtu = mtu - (IB_GRH_BYTES + IB_UDP_BYTES + IB_BTH_BYTES + + IB_EXT_XRC_BYTES + IB_EXT_ATOMICETH_BYTES + + IB_ICRC_BYTES); if (mtu >= ib_mtu_enum_to_int(IB_MTU_4096)) return IB_MTU_4096; --- a/include/rdma/ib_pack.h +++ b/include/rdma/ib_pack.h @@ -37,14 +37,17 @@ #include <uapi/linux/if_ether.h> enum { - IB_LRH_BYTES = 8, - IB_ETH_BYTES = 14, - IB_VLAN_BYTES = 4, - IB_GRH_BYTES = 40, - IB_IP4_BYTES = 20, - IB_UDP_BYTES = 8, - IB_BTH_BYTES = 12, - IB_DETH_BYTES = 8 + IB_LRH_BYTES = 8, + IB_ETH_BYTES = 14, + IB_VLAN_BYTES = 4, + IB_GRH_BYTES = 40, + IB_IP4_BYTES = 20, + IB_UDP_BYTES = 8, + IB_BTH_BYTES = 12, + IB_DETH_BYTES = 8, + IB_EXT_ATOMICETH_BYTES = 28, + IB_EXT_XRC_BYTES = 4, + IB_ICRC_BYTES = 4 }; struct ib_field { Patches currently in stable-queue which might be from parav(a)mellanox.com are queue-4.9/ib-core-fix-calculation-of-maximum-roce-mtu.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "HID: cp2112: fix broken gpio_direction_input callback" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled HID: cp2112: fix broken gpio_direction_input callback to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hid-cp2112-fix-broken-gpio_direction_input-callback.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Sébastien Szymanski <sebastien.szymanski(a)armadeus.com> Date: Fri, 10 Nov 2017 10:01:43 +0100 Subject: HID: cp2112: fix broken gpio_direction_input callback From: Sébastien Szymanski <sebastien.szymanski(a)armadeus.com> [ Upstream commit 7da85fbf1c87d4f73621e0e7666a3387497075a9 ] When everything goes smoothly, ret is set to 0 which makes the function to return EIO error. Fixes: 8e9faa15469e ("HID: cp2112: fix gpio-callback error handling") Signed-off-by: SÃ©bastien Szymanski <sebastien.szymanski(a)armadeus.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hid/hid-cp2112.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/drivers/hid/hid-cp2112.c +++ b/drivers/hid/hid-cp2112.c @@ -188,6 +188,8 @@ static int cp2112_gpio_direction_input(s HID_REQ_GET_REPORT); if (ret != CP2112_GPIO_CONFIG_LENGTH) { hid_err(hdev, "error requesting GPIO config: %d\n", ret); + if (ret >= 0) + ret = -EIO; goto exit; } @@ -197,8 +199,10 @@ static int cp2112_gpio_direction_input(s ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT, HID_REQ_SET_REPORT); - if (ret < 0) { + if (ret != CP2112_GPIO_CONFIG_LENGTH) { hid_err(hdev, "error setting GPIO config: %d\n", ret); + if (ret >= 0) + ret = -EIO; goto exit; } @@ -206,7 +210,7 @@ static int cp2112_gpio_direction_input(s exit: mutex_unlock(&dev->lock); - return ret < 0 ? ret : -EIO; + return ret; } static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value) Patches currently in stable-queue which might be from sebastien.szymanski(a)armadeus.com are queue-4.9/clk-imx6-refine-hdmi_isfr-s-parent-to-make-hdmi-work-on-i.mx6-socs-w-o-vpu.patch queue-4.9/hid-cp2112-fix-broken-gpio_direction_input-callback.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "GFS2: Take inode off order_write list when setting jdata flag" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled GFS2: Take inode off order_write list when setting jdata flag to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gfs2-take-inode-off-order_write-list-when-setting-jdata-flag.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Bob Peterson <rpeterso(a)redhat.com> Date: Wed, 20 Sep 2017 08:30:04 -0500 Subject: GFS2: Take inode off order_write list when setting jdata flag From: Bob Peterson <rpeterso(a)redhat.com> [ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ] This patch fixes a deadlock caused when the jdata flag is set for inodes that are already on the ordered write list. Since it is on the ordered write list, log_flush calls gfs2_ordered_write which calls filemap_fdatawrite. But since the inode had the jdata flag set, that calls gfs2_jdata_writepages, which tries to start a new transaction. A new transaction cannot be started because it tries to acquire the log_flush rwsem which is already locked by the log flush operation. The bottom line is: We cannot switch an inode from ordered to jdata until we eliminate any ordered data pages (via log flush) or any log_flush operation afterward will create the circular dependency above. So we need to flush the log before setting the diskflags to switch the file mode, then we need to remove the inode from the ordered writes list. Before this patch, the log flush was done for jdata->ordered, but that's wrong. If we're going from jdata to ordered, we don't need to call gfs2_log_flush because the call to filemap_fdatawrite will do it for us: filemap_fdatawrite() -> __filemap_fdatawrite_range() __filemap_fdatawrite_range() -> do_writepages() do_writepages() -> gfs2_jdata_writepages() gfs2_jdata_writepages() -> gfs2_log_flush() This patch modifies function do_gfs2_set_flags so that if a file has its jdata flag set, and it's already on the ordered write list, the log will be flushed and it will be removed from the list before setting the flag. Signed-off-by: Bob Peterson <rpeterso(a)redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba(a)redhat.com> Acked-by: Abhijith Das <adas(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/gfs2/file.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -256,7 +256,7 @@ static int do_gfs2_set_flags(struct file goto out; } if ((flags ^ new_flags) & GFS2_DIF_JDATA) { - if (flags & GFS2_DIF_JDATA) + if (new_flags & GFS2_DIF_JDATA) gfs2_log_flush(sdp, ip->i_gl, NORMAL_FLUSH); error = filemap_fdatawrite(inode->i_mapping); if (error) @@ -264,6 +264,8 @@ static int do_gfs2_set_flags(struct file error = filemap_fdatawait(inode->i_mapping); if (error) goto out; + if (new_flags & GFS2_DIF_JDATA) + gfs2_ordered_del_inode(ip); } error = gfs2_trans_begin(sdp, RES_DINODE, 0); if (error) Patches currently in stable-queue which might be from rpeterso(a)redhat.com are queue-4.9/gfs2-take-inode-off-order_write-list-when-setting-jdata-flag.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "fjes: Fix wrong netdevice feature flags" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled fjes: Fix wrong netdevice feature flags to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: fjes-fix-wrong-netdevice-feature-flags.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Taku Izumi <izumi.taku(a)jp.fujitsu.com> Date: Wed, 15 Mar 2017 13:47:50 +0900 Subject: fjes: Fix wrong netdevice feature flags From: Taku Izumi <izumi.taku(a)jp.fujitsu.com> [ Upstream commit fe8daf5fa715f7214952f06a387e4b7de818c5be ] This patch fixes netdev->features for Extended Socket network device. Currently Extended Socket network device's netdev->feature claims NETIF_F_HW_CSUM, however this is completely wrong. There's no feature of checksum offloading. That causes invalid TCP/UDP checksum and packet rejection when IP forwarding from Extended Socket network device to other network device. NETIF_F_HW_CSUM should be omitted. Signed-off-by: Taku Izumi <izumi.taku(a)jp.fujitsu.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/fjes/fjes_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/fjes/fjes_main.c +++ b/drivers/net/fjes/fjes_main.c @@ -1277,7 +1277,7 @@ static void fjes_netdev_setup(struct net fjes_set_ethtool_ops(netdev); netdev->mtu = fjes_support_mtu[3]; netdev->flags |= IFF_BROADCAST; - netdev->features |= NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_CTAG_FILTER; + netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; } static void fjes_irq_watch_task(struct work_struct *work) Patches currently in stable-queue which might be from izumi.taku(a)jp.fujitsu.com are queue-4.9/fjes-fix-wrong-netdevice-feature-flags.patch queue-4.9/revert-x86-acpi-set-persistent-cpuid-nodeid-mapping-when-booting.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "fbdev: controlfb: Add missing modes to fix out of bounds access" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled fbdev: controlfb: Add missing modes to fix out of bounds access to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: fbdev-controlfb-add-missing-modes-to-fix-out-of-bounds-access.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Geert Uytterhoeven <geert(a)linux-m68k.org> Date: Thu, 9 Nov 2017 18:09:33 +0100 Subject: fbdev: controlfb: Add missing modes to fix out of bounds access From: Geert Uytterhoeven <geert(a)linux-m68k.org> [ Upstream commit ac831a379d34109451b3c41a44a20ee10ecb615f ] Dan's static analysis says: drivers/video/fbdev/controlfb.c:560 control_setup() error: buffer overflow 'control_mac_modes' 20 <= 21 Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22, which may lead to an out of bounds read when parsing vmode commandline options. The bug was introduced in v2.4.5.6, when 2 new modes were added to macmodes.h, but control_mac_modes[] wasn't updated: https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.… Augment control_mac_modes[] with the two new video modes to fix this. Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> Cc: Dan Carpenter <dan.carpenter(a)oracle.com> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/controlfb.h | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/video/fbdev/controlfb.h +++ b/drivers/video/fbdev/controlfb.h @@ -141,5 +141,7 @@ static struct max_cmodes control_mac_mod {{ 1, 2}}, /* 1152x870, 75Hz */ {{ 0, 1}}, /* 1280x960, 75Hz */ {{ 0, 1}}, /* 1280x1024, 75Hz */ + {{ 1, 2}}, /* 1152x768, 60Hz */ + {{ 0, 1}}, /* 1600x1024, 60Hz */ }; Patches currently in stable-queue which might be from geert(a)linux-m68k.org are queue-4.9/fbdev-controlfb-add-missing-modes-to-fix-out-of-bounds-access.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "efi/esrt: Cleanup bad memory map log messages" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled efi/esrt: Cleanup bad memory map log messages to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: efi-esrt-cleanup-bad-memory-map-log-messages.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Daniel Drake <drake(a)endlessm.com> Date: Tue, 7 Feb 2017 13:08:23 -0600 Subject: efi/esrt: Cleanup bad memory map log messages From: Daniel Drake <drake(a)endlessm.com> [ Upstream commit 822f5845f710e57d7e2df1fd1ee00d6e19d334fe ] The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both log 2 error messages during boot: efi: requested map not found. esrt: ESRT header is not in the memory map. Searching the web, this seems to affect many other platforms too. Since these messages are logged as errors, they appear on-screen during the boot process even when using the "quiet" boot parameter used by distros. Demote the ESRT error to a warning so that it does not appear on-screen, and delete the error logging from efi_mem_desc_lookup; both callsites of that function log more specific messages upon failure. Out of curiosity I looked closer at the Weibu F3C. There is no entry in the UEFI-provided memory map which corresponds to the ESRT pointer, but hacking the code to map it anyway, the ESRT does appear to be valid with 2 entries. Signed-off-by: Daniel Drake <drake(a)endlessm.com> Cc: Matt Fleming <matt(a)codeblueprint.co.uk> Acked-by: Peter Jones <pjones(a)redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/firmware/efi/efi.c | 1 - drivers/firmware/efi/esrt.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -384,7 +384,6 @@ int __init efi_mem_desc_lookup(u64 phys_ return 0; } } - pr_err_once("requested map not found.\n"); return -ENOENT; } --- a/drivers/firmware/efi/esrt.c +++ b/drivers/firmware/efi/esrt.c @@ -251,7 +251,7 @@ void __init efi_esrt_init(void) rc = efi_mem_desc_lookup(efi.esrt, &md); if (rc < 0) { - pr_err("ESRT header is not in the memory map.\n"); + pr_warn("ESRT header is not in the memory map.\n"); return; } Patches currently in stable-queue which might be from drake(a)endlessm.com are queue-4.9/efi-esrt-cleanup-bad-memory-map-log-messages.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/radeon/si: add dpm quirk for Oland" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/radeon/si: add dpm quirk for Oland to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-radeon-si-add-dpm-quirk-for-oland.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Alex Deucher <alexander.deucher(a)amd.com> Date: Tue, 14 Mar 2017 14:42:03 -0400 Subject: drm/radeon/si: add dpm quirk for Oland From: Alex Deucher <alexander.deucher(a)amd.com> [ Upstream commit 0f424de1fd9bc4ab24bd1fe5430ab5618e803e31 ] OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems with higher sclks. Acked-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/radeon/si_dpm.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3029,6 +3029,12 @@ static void si_apply_state_adjust_rules( max_sclk = 75000; max_mclk = 80000; } + } else if (rdev->family == CHIP_OLAND) { + if ((rdev->pdev->device == 0x6604) && + (rdev->pdev->subsystem_vendor == 0x1028) && + (rdev->pdev->subsystem_device == 0x066F)) { + max_sclk = 75000; + } } /* Apply dpm quirks */ while (p && p->chip_device != 0) { Patches currently in stable-queue which might be from alexander.deucher(a)amd.com are queue-4.9/drm-radeon-reinstate-oland-workaround-for-sclk.patch queue-4.9/drm-amdgpu-fix-parser-init-error-path-to-avoid-crash-in-parser-fini.patch queue-4.9/drm-radeon-si-add-dpm-quirk-for-oland.patch queue-4.9/drm-amd-remove-broken-include-path.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/radeon: reinstate oland workaround for sclk" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/radeon: reinstate oland workaround for sclk to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-radeon-reinstate-oland-workaround-for-sclk.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Alex Deucher <alexander.deucher(a)amd.com> Date: Wed, 15 Mar 2017 21:11:46 -0400 Subject: drm/radeon: reinstate oland workaround for sclk From: Alex Deucher <alexander.deucher(a)amd.com> [ Upstream commit 66822d815ae61ecb2d9dba9031517e8a8476969d ] Higher sclks seem to be unstable on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222 Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/radeon/si_dpm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3030,9 +3030,13 @@ static void si_apply_state_adjust_rules( max_mclk = 80000; } } else if (rdev->family == CHIP_OLAND) { - if ((rdev->pdev->device == 0x6604) && - (rdev->pdev->subsystem_vendor == 0x1028) && - (rdev->pdev->subsystem_device == 0x066F)) { + if ((rdev->pdev->revision == 0xC7) || + (rdev->pdev->revision == 0x80) || + (rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0x87) || + (rdev->pdev->device == 0x6604) || + (rdev->pdev->device == 0x6605)) { max_sclk = 75000; } } Patches currently in stable-queue which might be from alexander.deucher(a)amd.com are queue-4.9/drm-radeon-reinstate-oland-workaround-for-sclk.patch queue-4.9/drm-amdgpu-fix-parser-init-error-path-to-avoid-crash-in-parser-fini.patch queue-4.9/drm-radeon-si-add-dpm-quirk-for-oland.patch queue-4.9/drm-amd-remove-broken-include-path.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/omap: fix dmabuf mmap for dma_alloc'ed buffers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/omap: fix dmabuf mmap for dma_alloc'ed buffers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-omap-fix-dmabuf-mmap-for-dma_alloc-ed-buffers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Date: Tue, 28 Feb 2017 10:11:45 +0200 Subject: drm/omap: fix dmabuf mmap for dma_alloc'ed buffers From: Tomi Valkeinen <tomi.valkeinen(a)ti.com> [ Upstream commit 9fa1d7537242bd580ffa99c4725a0407096aad26 ] omap_gem_dmabuf_mmap() returns an error (with a WARN) when called for a buffer which is allocated with dma_alloc_*(). This prevents dmabuf mmap from working on SoCs without DMM, e.g. AM4 and OMAP3. I could not find any reason for omap_gem_dmabuf_mmap() rejecting such buffers, and just removing the if() fixes the limitation. Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 3 --- 1 file changed, 3 deletions(-) --- a/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c +++ b/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c @@ -147,9 +147,6 @@ static int omap_gem_dmabuf_mmap(struct d struct drm_gem_object *obj = buffer->priv; int ret = 0; - if (WARN_ON(!obj->filp)) - return -EINVAL; - ret = drm_gem_mmap_obj(obj, omap_gem_mmap_size(obj), vma); if (ret < 0) return ret; Patches currently in stable-queue which might be from tomi.valkeinen(a)ti.com are queue-4.9/drm-omap-fix-dmabuf-mmap-for-dma_alloc-ed-buffers.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/amdgpu: fix parser init error path to avoid crash in parser fini" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/amdgpu: fix parser init error path to avoid crash in parser fini to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-amdgpu-fix-parser-init-error-path-to-avoid-crash-in-parser-fini.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Dave Airlie <airlied(a)redhat.com> Date: Fri, 10 Mar 2017 12:13:04 +1000 Subject: drm/amdgpu: fix parser init error path to avoid crash in parser fini From: Dave Airlie <airlied(a)redhat.com> [ Upstream commit 607523d19c9d67ba4cf7bdaced644f11ed04992c ] If we don't reset the chunk info in the error path, the subsequent fini path will double free. Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Dave Airlie <airlied(a)redhat.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -240,6 +240,8 @@ free_partial_kdata: for (; i >= 0; i--) drm_free_large(p->chunks[i].kdata); kfree(p->chunks); + p->chunks = NULL; + p->nchunks = 0; put_ctx: amdgpu_ctx_put(p->ctx); free_chunk: Patches currently in stable-queue which might be from airlied(a)redhat.com are queue-4.9/drm-amdgpu-fix-parser-init-error-path-to-avoid-crash-in-parser-fini.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "drm: amd: remove broken include path" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm: amd: remove broken include path to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-amd-remove-broken-include-path.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Arnd Bergmann <arnd(a)arndb.de> Date: Tue, 14 Mar 2017 22:27:11 +0100 Subject: drm: amd: remove broken include path From: Arnd Bergmann <arnd(a)arndb.de> [ Upstream commit 655d9ca9ac075da1ef2a45012ba48a39f6eb1f58 ] The AMD ACP driver adds "-I../acp -I../acp/include" to the gcc command line, which makes no sense, since these are evaluated relative to the build directory. When we build with "make W=1", they instead cause a warning: cc1: error: ../acp/: No such file or directory [-Werror=missing-include-dirs] cc1: error: ../acp/include: No such file or directory [-Werror=missing-include-dirs] cc1: all warnings being treated as errors ../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o' failed ../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_device.o' failed ../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_kms.o' failed This removes the subdir-ccflags variable that evidently did not serve any purpose here. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/amd/acp/Makefile | 2 -- 1 file changed, 2 deletions(-) --- a/drivers/gpu/drm/amd/acp/Makefile +++ b/drivers/gpu/drm/amd/acp/Makefile @@ -3,6 +3,4 @@ # of AMDSOC/AMDGPU drm driver. # It provides the HW control for ACP related functionalities. -subdir-ccflags-y += -I$(AMDACPPATH)/ -I$(AMDACPPATH)/include - AMD_ACP_FILES := $(AMDACPPATH)/acp_hw.o Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.9/irqchip-mvebu-odmi-select-generic_msi_irq_domain.patch queue-4.9/drm-amd-remove-broken-include-path.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "Drivers: hv: util: move waiting for release to hv_utils_transport itself" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Drivers: hv: util: move waiting for release to hv_utils_transport itself to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-hv-util-move-waiting-for-release-to-hv_utils_transport-itself.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Vitaly Kuznetsov <vkuznets(a)redhat.com> Date: Sat, 4 Mar 2017 18:13:59 -0700 Subject: Drivers: hv: util: move waiting for release to hv_utils_transport itself From: Vitaly Kuznetsov <vkuznets(a)redhat.com> [ Upstream commit e9c18ae6eb2b312f16c63e34b43ea23926daa398 ] Waiting for release_event in all three drivers introduced issues on release as on_reset() hook is not always called. E.g. if the device was never opened we will never get the completion. Move the waiting code to hvutil_transport_destroy() and make sure it is only called when the device is open. hvt->lock serialization should guarantee the absence of races. Fixes: 5a66fecbf6aa ("Drivers: hv: util: kvp: Fix a rescind processing issue") Fixes: 20951c7535b5 ("Drivers: hv: util: Fcopy: Fix a rescind processing issue") Fixes: d77044d142e9 ("Drivers: hv: util: Backup: Fix a rescind processing issue") Reported-by: Dexuan Cui <decui(a)microsoft.com> Tested-by: Dexuan Cui <decui(a)microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets(a)redhat.com> Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hv/hv_fcopy.c | 4 ---- drivers/hv/hv_kvp.c | 4 ---- drivers/hv/hv_snapshot.c | 4 ---- drivers/hv/hv_utils_transport.c | 12 ++++++++---- drivers/hv/hv_utils_transport.h | 1 + 5 files changed, 9 insertions(+), 16 deletions(-) --- a/drivers/hv/hv_fcopy.c +++ b/drivers/hv/hv_fcopy.c @@ -61,7 +61,6 @@ static DECLARE_WORK(fcopy_send_work, fco static const char fcopy_devname[] = "vmbus/hv_fcopy"; static u8 *recv_buffer; static struct hvutil_transport *hvt; -static struct completion release_event; /* * This state maintains the version number registered by the daemon. */ @@ -322,7 +321,6 @@ static void fcopy_on_reset(void) if (cancel_delayed_work_sync(&fcopy_timeout_work)) fcopy_respond_to_host(HV_E_FAIL); - complete(&release_event); } int hv_fcopy_init(struct hv_util_service *srv) @@ -330,7 +328,6 @@ int hv_fcopy_init(struct hv_util_service recv_buffer = srv->recv_buffer; fcopy_transaction.recv_channel = srv->channel; - init_completion(&release_event); /* * When this driver loads, the user level daemon that * processes the host requests may not yet be running. @@ -352,5 +349,4 @@ void hv_fcopy_deinit(void) fcopy_transaction.state = HVUTIL_DEVICE_DYING; cancel_delayed_work_sync(&fcopy_timeout_work); hvutil_transport_destroy(hvt); - wait_for_completion(&release_event); } --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -88,7 +88,6 @@ static DECLARE_WORK(kvp_sendkey_work, kv static const char kvp_devname[] = "vmbus/hv_kvp"; static u8 *recv_buffer; static struct hvutil_transport *hvt; -static struct completion release_event; /* * Register the kernel component with the user-level daemon. * As part of this registration, pass the LIC version number. @@ -717,7 +716,6 @@ static void kvp_on_reset(void) if (cancel_delayed_work_sync(&kvp_timeout_work)) kvp_respond_to_host(NULL, HV_E_FAIL); kvp_transaction.state = HVUTIL_DEVICE_INIT; - complete(&release_event); } int @@ -726,7 +724,6 @@ hv_kvp_init(struct hv_util_service *srv) recv_buffer = srv->recv_buffer; kvp_transaction.recv_channel = srv->channel; - init_completion(&release_event); /* * When this driver loads, the user level daemon that * processes the host requests may not yet be running. @@ -750,5 +747,4 @@ void hv_kvp_deinit(void) cancel_delayed_work_sync(&kvp_timeout_work); cancel_work_sync(&kvp_sendkey_work); hvutil_transport_destroy(hvt); - wait_for_completion(&release_event); } --- a/drivers/hv/hv_snapshot.c +++ b/drivers/hv/hv_snapshot.c @@ -66,7 +66,6 @@ static int dm_reg_value; static const char vss_devname[] = "vmbus/hv_vss"; static __u8 *recv_buffer; static struct hvutil_transport *hvt; -static struct completion release_event; static void vss_timeout_func(struct work_struct *dummy); static void vss_handle_request(struct work_struct *dummy); @@ -331,13 +330,11 @@ static void vss_on_reset(void) if (cancel_delayed_work_sync(&vss_timeout_work)) vss_respond_to_host(HV_E_FAIL); vss_transaction.state = HVUTIL_DEVICE_INIT; - complete(&release_event); } int hv_vss_init(struct hv_util_service *srv) { - init_completion(&release_event); if (vmbus_proto_version < VERSION_WIN8_1) { pr_warn("Integration service 'Backup (volume snapshot)'" " not supported on this host version.\n"); @@ -368,5 +365,4 @@ void hv_vss_deinit(void) cancel_delayed_work_sync(&vss_timeout_work); cancel_work_sync(&vss_handle_request_work); hvutil_transport_destroy(hvt); - wait_for_completion(&release_event); } --- a/drivers/hv/hv_utils_transport.c +++ b/drivers/hv/hv_utils_transport.c @@ -182,10 +182,11 @@ static int hvt_op_release(struct inode * * connects back. */ hvt_reset(hvt); - mutex_unlock(&hvt->lock); if (mode_old == HVUTIL_TRANSPORT_DESTROY) - hvt_transport_free(hvt); + complete(&hvt->release); + + mutex_unlock(&hvt->lock); return 0; } @@ -304,6 +305,7 @@ struct hvutil_transport *hvutil_transpor init_waitqueue_head(&hvt->outmsg_q); mutex_init(&hvt->lock); + init_completion(&hvt->release); spin_lock(&hvt_list_lock); list_add(&hvt->list, &hvt_list); @@ -351,6 +353,8 @@ void hvutil_transport_destroy(struct hvu if (hvt->cn_id.idx > 0 && hvt->cn_id.val > 0) cn_del_callback(&hvt->cn_id); - if (mode_old != HVUTIL_TRANSPORT_CHARDEV) - hvt_transport_free(hvt); + if (mode_old == HVUTIL_TRANSPORT_CHARDEV) + wait_for_completion(&hvt->release); + + hvt_transport_free(hvt); } --- a/drivers/hv/hv_utils_transport.h +++ b/drivers/hv/hv_utils_transport.h @@ -41,6 +41,7 @@ struct hvutil_transport { int outmsg_len; /* its length */ wait_queue_head_t outmsg_q; /* poll/read wait queue */ struct mutex lock; /* protects struct members */ + struct completion release; /* synchronize with fd release */ }; struct hvutil_transport *hvutil_transport_init(const char *name, Patches currently in stable-queue which might be from vkuznets(a)redhat.com are queue-4.9/drivers-hv-util-move-waiting-for-release-to-hv_utils_transport-itself.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-ti-dma-crossbar-correct-am335x-am43xx-mux-value-type.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 8 Nov 2017 12:02:25 +0200 Subject: dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit 288e7560e4d3e259aa28f8f58a8dfe63627a1bf6 ] The used 0x1f mask is only valid for am335x family of SoC, different family using this type of crossbar might have different number of electable events. In case of am43xx family 0x3f mask should have been used for example. Instead of trying to handle each family's mask, just use u8 type to store the mux value since the event offsets are aligned to byte offset. Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx") Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/ti-dma-crossbar.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/dma/ti-dma-crossbar.c +++ b/drivers/dma/ti-dma-crossbar.c @@ -49,12 +49,12 @@ struct ti_am335x_xbar_data { struct ti_am335x_xbar_map { u16 dma_line; - u16 mux_val; + u8 mux_val; }; -static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u16 val) +static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val) { - writeb_relaxed(val & 0x1f, iomem + event); + writeb_relaxed(val, iomem + event); } static void ti_am335x_xbar_free(struct device *dev, void *route_data) @@ -105,7 +105,7 @@ static void *ti_am335x_xbar_route_alloca } map->dma_line = (u16)dma_spec->args[0]; - map->mux_val = (u16)dma_spec->args[2]; + map->mux_val = (u8)dma_spec->args[2]; dma_spec->args[2] = 0; dma_spec->args_count = 2; Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.9/dmaengine-ti-dma-crossbar-correct-am335x-am43xx-mux-value-type.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "dmaengine: rcar-dmac: use TCRB instead of TCR for residue" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: rcar-dmac: use TCRB instead of TCR for residue to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-rcar-dmac-use-tcrb-instead-of-tcr-for-residue.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Date: Thu, 19 Oct 2017 01:15:13 +0000 Subject: dmaengine: rcar-dmac: use TCRB instead of TCR for residue From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> [ Upstream commit 847449f23dcbff68234525f90dd53c7c7db18cad ] SYS/RT/Audio DMAC includes independent data buffers for reading and writing. Therefore, the read transfer counter and write transfer counter have different values. TCR indicates read counter, and TCRB indicates write counter. The relationship is like below. TCR TCRB [SOURCE] -> [DMAC] -> [SINK] In the MEM_TO_DEV direction, what really matters is how much data has been written to the device. If the DMA is interrupted between read and write, then, the data doesn't end up in the destination, so shouldn't be counted. TCRB is thus the register we should use in this cases. In the DEV_TO_MEM direction, the situation is more complex. Both the read and write side are important. What matters from a data consumer point of view is how much data has been written to memory. On the other hand, if the transfer is interrupted between read and write, we'll end up losing data. It can also be important to report. In the MEM_TO_MEM direction, what matters is of course how much data has been written to memory from data consumer point of view. Here, because read and write have independent data buffers, it will take a while for TCR and TCRB to become equal. Thus we should check TCRB in this case, too. Thus, all cases we should check TCRB instead of TCR. Without this patch, Sound Capture has noise after PluseAudio support (= 07b7acb51d2 ("ASoC: rsnd: update pointer more accurate")), because the recorder will use wrong residue counter which indicates transferred from sound device, but in reality the data was not yet put to memory and recorder will record it. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> [Kuninori: added detail information in log] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/sh/rcar-dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1289,7 +1289,7 @@ static unsigned int rcar_dmac_chan_get_r } /* Add the residue for the current chunk. */ - residue += rcar_dmac_chan_read(chan, RCAR_DMATCR) << desc->xfer_shift; + residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift; return residue; } Patches currently in stable-queue which might be from hiroyuki.yokoyama.vx(a)renesas.com are queue-4.9/dmaengine-rcar-dmac-use-tcrb-instead-of-tcr-for-residue.patch queue-4.9/asoc-rcar-clear-de-bit-only-in-pdmachcr-when-it-stops.patch queue-4.9/asoc-rsnd-fix-sound-route-path-when-using-src6-src9.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "dmaengine: Fix array index out of bounds warning in __get_unmap_pool()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: Fix array index out of bounds warning in __get_unmap_pool() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-fix-array-index-out-of-bounds-warning-in-__get_unmap_pool.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Matthias Kaehlcke <mka(a)chromium.org> Date: Mon, 13 Mar 2017 14:30:29 -0700 Subject: dmaengine: Fix array index out of bounds warning in __get_unmap_pool() From: Matthias Kaehlcke <mka(a)chromium.org> [ Upstream commit 23f963e91fd81f44f6b316b1c24db563354c6be8 ] This fixes the following warning when building with clang and CONFIG_DMA_ENGINE_RAID=n : drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[2]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { ^ drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[3]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { Signed-off-by: Matthias Kaehlcke <mka(a)chromium.org> Reviewed-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/dmaengine.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -1107,12 +1107,14 @@ static struct dmaengine_unmap_pool *__ge switch (order) { case 0 ... 1: return &unmap_pool[0]; +#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID) case 2 ... 4: return &unmap_pool[1]; case 5 ... 7: return &unmap_pool[2]; case 8: return &unmap_pool[3]; +#endif default: BUG(); return NULL; Patches currently in stable-queue which might be from mka(a)chromium.org are queue-4.9/bluetooth-btusb-driver-to-enable-the-usb-wakeup-feature.patch queue-4.9/dmaengine-fix-array-index-out-of-bounds-warning-in-__get_unmap_pool.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "crypto: tcrypt - fix buffer lengths in test_aead_speed()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: tcrypt - fix buffer lengths in test_aead_speed() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-tcrypt-fix-buffer-lengths-in-test_aead_speed.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Robert Baronescu <robert.baronescu(a)nxp.com> Date: Tue, 10 Oct 2017 13:22:00 +0300 Subject: crypto: tcrypt - fix buffer lengths in test_aead_speed() From: Robert Baronescu <robert.baronescu(a)nxp.com> [ Upstream commit 7aacbfcb331ceff3ac43096d563a1f93ed46e35e ] Fix the way the length of the buffers used for encryption / decryption are computed. For e.g. in case of encryption, input buffer does not contain an authentication tag. Signed-off-by: Robert Baronescu <robert.baronescu(a)nxp.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/tcrypt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -342,7 +342,7 @@ static void test_aead_speed(const char * } sg_init_aead(sg, xbuf, - *b_size + (enc ? authsize : 0)); + *b_size + (enc ? 0 : authsize)); sg_init_aead(sgout, xoutbuf, *b_size + (enc ? authsize : 0)); @@ -350,7 +350,9 @@ static void test_aead_speed(const char * sg_set_buf(&sg[0], assoc, aad_size); sg_set_buf(&sgout[0], assoc, aad_size); - aead_request_set_crypt(req, sg, sgout, *b_size, iv); + aead_request_set_crypt(req, sg, sgout, + *b_size + (enc ? 0 : authsize), + iv); aead_request_set_ad(req, aad_size); if (secs) Patches currently in stable-queue which might be from robert.baronescu(a)nxp.com are queue-4.9/crypto-tcrypt-fix-buffer-lengths-in-test_aead_speed.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "clk: tegra: Fix cclk_lp divisor register" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: tegra: Fix cclk_lp divisor register to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-tegra-fix-cclk_lp-divisor-register.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Michał Mirosław <mirq-linux(a)rere.qmqm.pl> Date: Tue, 19 Sep 2017 04:48:10 +0200 Subject: clk: tegra: Fix cclk_lp divisor register From: Michał Mirosław <mirq-linux(a)rere.qmqm.pl> [ Upstream commit 54eff2264d3e9fd7e3987de1d7eba1d3581c631e ] According to comments in code and common sense, cclk_lp uses its own divisor, not cclk_g's. Fixes: b08e8c0ecc42 ("clk: tegra: add clock support for Tegra30") Signed-off-by: Michał Mirosław <mirq-linux(a)rere.qmqm.pl> Acked-By: Peter De Schrijver <pdeschrijver(a)nvidia.com> Signed-off-by: Thierry Reding <treding(a)nvidia.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/tegra/clk-tegra30.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -963,7 +963,7 @@ static void __init tegra30_super_clk_ini * U71 divider of cclk_lp. */ clk = tegra_clk_register_divider("pll_p_out3_cclklp", "pll_p_out3", - clk_base + SUPER_CCLKG_DIVIDER, 0, + clk_base + SUPER_CCLKLP_DIVIDER, 0, TEGRA_DIVIDER_INT, 16, 8, 1, NULL); clk_register_clkdev(clk, "pll_p_out3_cclklp", NULL); Patches currently in stable-queue which might be from mirq-linux(a)rere.qmqm.pl are queue-4.9/clk-tegra-fix-cclk_lp-divisor-register.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "clk: mediatek: add the option for determining PLL source clock" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: mediatek: add the option for determining PLL source clock to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-mediatek-add-the-option-for-determining-pll-source-clock.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Chen Zhong <chen.zhong(a)mediatek.com> Date: Thu, 5 Oct 2017 11:50:23 +0800 Subject: clk: mediatek: add the option for determining PLL source clock From: Chen Zhong <chen.zhong(a)mediatek.com> [ Upstream commit c955bf3998efa3355790a4d8c82874582f1bc727 ] Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by: Chen Zhong <chen.zhong(a)mediatek.com> Signed-off-by: Sean Wang <sean.wang(a)mediatek.com> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/mediatek/clk-mtk.h | 1 + drivers/clk/mediatek/clk-pll.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) --- a/drivers/clk/mediatek/clk-mtk.h +++ b/drivers/clk/mediatek/clk-mtk.h @@ -185,6 +185,7 @@ struct mtk_pll_data { uint32_t pcw_reg; int pcw_shift; const struct mtk_pll_div_table *div_table; + const char *parent_name; }; void mtk_clk_register_plls(struct device_node *node, --- a/drivers/clk/mediatek/clk-pll.c +++ b/drivers/clk/mediatek/clk-pll.c @@ -302,7 +302,10 @@ static struct clk *mtk_clk_register_pll( init.name = data->name; init.ops = &mtk_pll_ops; - init.parent_names = &parent_name; + if (data->parent_name) + init.parent_names = &data->parent_name; + else + init.parent_names = &parent_name; init.num_parents = 1; clk = clk_register(NULL, &pll->hw); Patches currently in stable-queue which might be from chen.zhong(a)mediatek.com are queue-4.9/clk-mediatek-add-the-option-for-determining-pll-source-clock.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-imx6-refine-hdmi_isfr-s-parent-to-make-hdmi-work-on-i.mx6-socs-w-o-vpu.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Sébastien Szymanski <sebastien.szymanski(a)armadeus.com> Date: Tue, 1 Aug 2017 12:40:07 +0200 Subject: clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU From: Sébastien Szymanski <sebastien.szymanski(a)armadeus.com> [ Upstream commit c68ee58d9ee7b856ac722f18f4f26579c8fbd2b4 ] On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver fails to probe: [ 2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller (0000:00:00) [ 2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops): -19 [ 2.557403] imx-drm display-subsystem: master bind failed: -19 That's because hdmi_isfr's parent, video_27m, is not correctly ungated. As explained in commit 5ccc248cc537 ("ARM: imx6q: clk: Add support for mipi_core_cfg clock as a shared clock gate"), video_27m is gated by CCM_CCGR3[CG8]. On i.MX6 SoCs with VPU, the hdmi is working thanks to the CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever is in CCM_CCGR3[CG8]. The issue can be reproduced by setting CCMEOR[mod_en_ov_vpu] to 0. Make the HDMI work in every case by setting hdmi_isfr's parent to mipi_core_cfg. Signed-off-by: SÃ©bastien Szymanski <sebastien.szymanski(a)armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -487,7 +487,7 @@ static void __init imx6q_clocks_init(str clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); - clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4); + clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "mipi_core_cfg", base + 0x70, 4); clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6); clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8); clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); Patches currently in stable-queue which might be from sebastien.szymanski(a)armadeus.com are queue-4.9/clk-imx6-refine-hdmi_isfr-s-parent-to-make-hdmi-work-on-i.mx6-socs-w-o-vpu.patch queue-4.9/hid-cp2112-fix-broken-gpio_direction_input-callback.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "clk: hi6220: mark clock cs_atb_syspll as critical" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: hi6220: mark clock cs_atb_syspll as critical to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-hi6220-mark-clock-cs_atb_syspll-as-critical.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Leo Yan <leo.yan(a)linaro.org> Date: Fri, 1 Sep 2017 08:47:14 +0800 Subject: clk: hi6220: mark clock cs_atb_syspll as critical From: Leo Yan <leo.yan(a)linaro.org> [ Upstream commit d2a3671ebe6479483a12f94fcca63c058d95ad64 ] Clock cs_atb_syspll is pll used for coresight trace bus; when clock cs_atb_syspll is disabled and operates its child clock node cs_atb results in system hang. So mark clock cs_atb_syspll as critical to keep it enabled. Cc: Guodong Xu <guodong.xu(a)linaro.org> Cc: Zhangfei Gao <zhangfei.gao(a)linaro.org> Cc: Haojian Zhuang <haojian.zhuang(a)linaro.org> Signed-off-by: Leo Yan <leo.yan(a)linaro.org> Signed-off-by: Michael Turquette <mturquette(a)baylibre.com> Link: lkml.kernel.org/r/1504226835-2115-2-git-send-email-leo.yan@linaro.org Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/hisilicon/clk-hi6220.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/hisilicon/clk-hi6220.c +++ b/drivers/clk/hisilicon/clk-hi6220.c @@ -144,7 +144,7 @@ static struct hisi_gate_clock hi6220_sep { HI6220_BBPPLL_SEL, "bbppll_sel", "pll0_bbp_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 9, 0, }, { HI6220_MEDIA_PLL_SRC, "media_pll_src", "pll_media_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 10, 0, }, { HI6220_MMC2_SEL, "mmc2_sel", "mmc2_mux1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 11, 0, }, - { HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 12, 0, }, + { HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IS_CRITICAL, 0x270, 12, 0, }, }; static struct hisi_mux_clock hi6220_mux_clks_sys[] __initdata = { Patches currently in stable-queue which might be from leo.yan(a)linaro.org are queue-4.9/thermal-drivers-step_wise-fix-temperature-regulation-misbehavior.patch queue-4.9/clk-hi6220-mark-clock-cs_atb_syspll-as-critical.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "btrfs: tests: Fix a memory leak in error handling path in 'run_test()'" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled btrfs: tests: Fix a memory leak in error handling path in 'run_test()' to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-tests-fix-a-memory-leak-in-error-handling-path-in-run_test.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sun, 10 Sep 2017 13:19:38 +0200 Subject: btrfs: tests: Fix a memory leak in error handling path in 'run_test()' From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 9ca2e97fa3c3216200afe35a3b111ec51cc796d2 ] If 'btrfs_alloc_path()' fails, we must free the resources already allocated, as done in the other error handling paths in this function. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Reviewed-by: Qu Wenruo <quwenruo.btrfs(a)gmx.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/tests/free-space-tree-tests.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/fs/btrfs/tests/free-space-tree-tests.c +++ b/fs/btrfs/tests/free-space-tree-tests.c @@ -501,7 +501,8 @@ static int run_test(test_func_t test_fun path = btrfs_alloc_path(); if (!path) { test_msg("Couldn't allocate path\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out; } ret = add_block_group_free_space(&trans, root->fs_info, cache); Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.9/video-fbdev-au1200fb-release-some-resources-if-a-memory-allocation-fails.patch queue-4.9/video-fbdev-au1200fb-return-an-error-code-if-a-memory-allocation-fails.patch queue-4.9/btrfs-tests-fix-a-memory-leak-in-error-handling-path-in-run_test.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "btrfs: add missing memset while reading compressed inline extents" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled btrfs: add missing memset while reading compressed inline extents to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-add-missing-memset-while-reading-compressed-inline-extents.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Zygo Blaxell <ce3g8jdj(a)umail.furryterror.org> Date: Fri, 10 Mar 2017 16:45:44 -0500 Subject: btrfs: add missing memset while reading compressed inline extents From: Zygo Blaxell <ce3g8jdj(a)umail.furryterror.org> [ Upstream commit e1699d2d7bf6e6cce3e1baff19f9dd4595a58664 ] This is a story about 4 distinct (and very old) btrfs bugs. Commit c8b978188c ("Btrfs: Add zlib compression support") added three data corruption bugs for inline extents (bugs #1-3). Commit 93c82d5750 ("Btrfs: zero page past end of inline file items") fixed bug #1: uncompressed inline extents followed by a hole and more extents could get non-zero data in the hole as they were read. The fix was to add a memset in btrfs_get_extent to zero out the hole. Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption") fixed bug #2: compressed inline extents which contained non-zero bytes might be replaced with zero bytes in some cases. This patch removed an unhelpful memset from uncompress_inline, but the case where memset is required was missed. There is also a memset in the decompression code, but this only covers decompressed data that is shorter than the ram_bytes from the extent ref record. This memset doesn't cover the region between the end of the decompressed data and the end of the page. It has also moved around a few times over the years, so there's no single patch to refer to. This patch fixes bug #3: compressed inline extents followed by a hole and more extents could get non-zero data in the hole as they were read (i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/). The fix is the same: zero out the hole in the compressed case too, by putting a memset back in uncompress_inline, but this time with correct parameters. The last and oldest bug, bug #0, is the cause of the offending inline extent/hole/extent pattern. Bug #0 is a subtle and mostly-harmless quirk of behavior somewhere in the btrfs write code. In a few special cases, an inline extent and hole are allowed to persist where they normally would be combined with later extents in the file. A fast reproducer for bug #0 is presented below. A few offending extents are also created in the wild during large rsync transfers with the -S flag. A Linux kernel build (git checkout; make allyesconfig; make -j8) will produce a handful of offending files as well. Once an offending file is created, it can present different content to userspace each time it is read. Bug #0 is at least 4 and possibly 8 years old. I verified every vX.Y kernel back to v3.5 has this behavior. There are fossil records of this bug's effects in commits all the way back to v2.6.32. I have no reason to believe bug #0 wasn't present at the beginning of btrfs compression support in v2.6.29, but I can't easily test kernels that old to be sure. It is not clear whether bug #0 is worth fixing. A fix would likely require injecting extra reads into currently write-only paths, and most of the exceptional cases caused by bug #0 are already handled now. Whether we like them or not, bug #0's inline extents followed by holes are part of the btrfs de-facto disk format now, and we need to be able to read them without data corruption or an infoleak. So enough about bug #0, let's get back to bug #3 (this patch). An example of on-disk structure leading to data corruption found in the wild: item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160 inode generation 50 transid 50 size 47424 nbytes 49141 block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0 flags 0x0(none) item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20 inode ref index 3 namelen 10 name: DB_File.so item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362 inline extent data size 1341 ram 4085 compress(zlib) item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53 extent data disk byte 5367308288 nr 20480 extent data offset 0 nr 45056 ram 45056 extent compression(zlib) Different data appears in userspace during each read of the 11 bytes between 4085 and 4096. The extent in item 63 is not long enough to fill the first page of the file, so a memset is required to fill the space between item 63 (ending at 4085) and item 64 (beginning at 4096) with zero. Here is a reproducer from Liu Bo, which demonstrates another method of creating the same inline extent and hole pattern: Using 'page_poison=on' kernel command line (or enable CONFIG_PAGE_POISONING) run the following: # touch foo # chattr +c foo # xfs_io -f -c "pwrite -W 0 1000" foo # xfs_io -f -c "falloc 4 8188" foo # od -x foo # echo 3 >/proc/sys/vm/drop_caches # od -x foo This produce the following on my box: Correct output: file contains 1000 data bytes followed by zeros: 0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd * 0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000 0001760 0000 0000 0000 0000 0000 0000 0000 0000 * 0020000 Actual output: the data after the first 1000 bytes will be different each run: 0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd * 0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d 0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400 0002000 435f 0056 5f74 6164 7400 645f 0062 5f74 (...) Signed-off-by: Zygo Blaxell <ce3g8jdj(a)umail.furryterror.org> Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com> Reviewed-by: Chris Mason <clm(a)fb.com> Signed-off-by: Chris Mason <clm(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/inode.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6812,6 +6812,20 @@ static noinline int uncompress_inline(st max_size = min_t(unsigned long, PAGE_SIZE, max_size); ret = btrfs_decompress(compress_type, tmp, page, extent_offset, inline_size, max_size); + + /* + * decompression code contains a memset to fill in any space between the end + * of the uncompressed data and the end of max_size in case the decompressed + * data ends up shorter than ram_bytes. That doesn't cover the hole between + * the end of an inline extent and the beginning of the next block, so we + * cover that region here. + */ + + if (max_size + pg_offset < PAGE_SIZE) { + char *map = kmap(page); + memset(map + pg_offset + max_size, 0, PAGE_SIZE - max_size - pg_offset); + kunmap(page); + } kfree(tmp); return ret; } Patches currently in stable-queue which might be from ce3g8jdj(a)umail.furryterror.org are queue-4.9/btrfs-add-missing-memset-while-reading-compressed-inline-extents.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "bnxt_en: Ignore 0 value in autoneg supported speed from firmware." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Ignore 0 value in autoneg supported speed from firmware. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-ignore-0-value-in-autoneg-supported-speed-from-firmware.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Michael Chan <michael.chan(a)broadcom.com> Date: Wed, 8 Mar 2017 18:44:35 -0500 Subject: bnxt_en: Ignore 0 value in autoneg supported speed from firmware. From: Michael Chan <michael.chan(a)broadcom.com> [ Upstream commit 520ad89a54edea84496695d528f73ddcf4a52ea4 ] In some situations, the firmware will return 0 for autoneg supported speed. This may happen if the firmware detects no SFP module, for example. The driver should ignore this so that we don't end up with an invalid autoneg setting with nothing advertised. When SFP module is inserted, we'll get the updated settings from firmware at that time. Signed-off-by: Michael Chan <michael.chan(a)broadcom.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -5132,8 +5132,9 @@ static int bnxt_hwrm_phy_qcaps(struct bn bp->lpi_tmr_hi = le32_to_cpu(resp->valid_tx_lpi_timer_high) & PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_HIGH_MASK; } - link_info->support_auto_speeds = - le16_to_cpu(resp->supported_speeds_auto_mode); + if (resp->supported_speeds_auto_mode) + link_info->support_auto_speeds = + le16_to_cpu(resp->supported_speeds_auto_mode); hwrm_phy_qcaps_exit: mutex_unlock(&bp->hwrm_cmd_lock); Patches currently in stable-queue which might be from michael.chan(a)broadcom.com are queue-4.9/bnxt_en-ignore-0-value-in-autoneg-supported-speed-from-firmware.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "blk-mq: Fix tagset reinit in the presence of cpu hot-unplug" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: Fix tagset reinit in the presence of cpu hot-unplug to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-fix-tagset-reinit-in-the-presence-of-cpu-hot-unplug.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Sagi Grimberg <sagi(a)grimberg.me> Date: Mon, 13 Mar 2017 16:10:11 +0200 Subject: blk-mq: Fix tagset reinit in the presence of cpu hot-unplug From: Sagi Grimberg <sagi(a)grimberg.me> [ Upstream commit 0067d4b020ea07a58540acb2c5fcd3364bf326e0 ] In case cpu was unplugged, we need to make sure not to assume that the tags for that cpu are still allocated. so check for null tags when reinitializing a tagset. Reported-by: Yi Zhang <yizhan(a)redhat.com> Signed-off-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq-tag.c | 3 +++ 1 file changed, 3 insertions(+) --- a/block/blk-mq-tag.c +++ b/block/blk-mq-tag.c @@ -311,6 +311,9 @@ int blk_mq_reinit_tagset(struct blk_mq_t for (i = 0; i < set->nr_hw_queues; i++) { struct blk_mq_tags *tags = set->tags[i]; + if (!tags) + continue; + for (j = 0; j < tags->nr_tags; j++) { if (!tags->rqs[j]) continue; Patches currently in stable-queue which might be from sagi(a)grimberg.me are queue-4.9/blk-mq-fix-tagset-reinit-in-the-presence-of-cpu-hot-unplug.patch queue-4.9/nvmet-confirm-sq-percpu-has-scheduled-and-switched-to-atomic.patch queue-4.9/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.9/nvme-loop-fix-a-possible-use-after-free-when-destroying-the-admin-queue.patch queue-4.9/nvmet-rdma-fix-a-possible-uninitialized-variable-dereference.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "bcache: fix wrong cache_misses statistics" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: fix wrong cache_misses statistics to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-fix-wrong-cache_misses-statistics.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: "tang.junhui" <tang.junhui(a)zte.com.cn> Date: Mon, 30 Oct 2017 14:46:34 -0700 Subject: bcache: fix wrong cache_misses statistics From: "tang.junhui" <tang.junhui(a)zte.com.cn> [ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ] Currently, Cache missed IOs are identified by s->cache_miss, but actually, there are many situations that missed IOs are not assigned a value for s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO (s->iop.bypass = 1), or the cache_bio allocate failed. In these situations, it will go to out_put or out_submit, and s->cache_miss is null, which leads bch_mark_cache_accounting() to treat this IO as a hit IO. [ML: applied by 3-way merge] Signed-off-by: tang.junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Reviewed-by: Coly Li <colyli(a)suse.de> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/request.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -468,6 +468,7 @@ struct search { unsigned recoverable:1; unsigned write:1; unsigned read_dirty_data:1; + unsigned cache_missed:1; unsigned long start_time; @@ -653,6 +654,7 @@ static inline struct search *search_allo s->orig_bio = bio; s->cache_miss = NULL; + s->cache_missed = 0; s->d = d; s->recoverable = 1; s->write = op_is_write(bio_op(bio)); @@ -771,7 +773,7 @@ static void cached_dev_read_done_bh(stru struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); bch_mark_cache_accounting(s->iop.c, s->d, - !s->cache_miss, s->iop.bypass); + !s->cache_missed, s->iop.bypass); trace_bcache_read(s->orig_bio, !s->cache_miss, s->iop.bypass); if (s->iop.error) @@ -790,6 +792,8 @@ static int cached_dev_cache_miss(struct struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); struct bio *miss, *cache_bio; + s->cache_missed = 1; + if (s->cache_miss || s->iop.bypass) { miss = bio_next_split(bio, sectors, GFP_NOIO, s->d->bio_split); ret = miss == bio ? MAP_DONE : MAP_CONTINUE; Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-4.9/bcache-fix-wrong-cache_misses-statistics.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "bcache: explicitly destroy mutex while exiting" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: explicitly destroy mutex while exiting to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-explicitly-destroy-mutex-while-exiting.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Liang Chen <liangchen.linux(a)gmail.com> Date: Mon, 30 Oct 2017 14:46:35 -0700 Subject: bcache: explicitly destroy mutex while exiting From: Liang Chen <liangchen.linux(a)gmail.com> [ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ] mutex_destroy does nothing most of time, but it's better to call it to make the code future proof and it also has some meaning for like mutex debug. As Coly pointed out in a previous review, bcache_exit() may not be able to handle all the references properly if userspace registers cache and backing devices right before bch_debug_init runs and bch_debug_init failes later. So not exposing userspace interface until everything is ready to avoid that issue. Signed-off-by: Liang Chen <liangchen.linux(a)gmail.com> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Reviewed-by: Coly Li <colyli(a)suse.de> Reviewed-by: Eric Wheeler <bcache(a)linux.ewheeler.net> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/super.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -2091,6 +2091,7 @@ static void bcache_exit(void) if (bcache_major) unregister_blkdev(bcache_major, "bcache"); unregister_reboot_notifier(&reboot); + mutex_destroy(&bch_register_lock); } static int __init bcache_init(void) @@ -2109,14 +2110,15 @@ static int __init bcache_init(void) bcache_major = register_blkdev(0, "bcache"); if (bcache_major < 0) { unregister_reboot_notifier(&reboot); + mutex_destroy(&bch_register_lock); return bcache_major; } if (!(bcache_wq = alloc_workqueue("bcache", WQ_MEM_RECLAIM, 0)) || !(bcache_kobj = kobject_create_and_add("bcache", fs_kobj)) || - sysfs_create_files(bcache_kobj, files) || bch_request_init() || - bch_debug_init(bcache_kobj)) + bch_debug_init(bcache_kobj) || + sysfs_create_files(bcache_kobj, files)) goto err; return 0; Patches currently in stable-queue which might be from liangchen.linux(a)gmail.com are queue-4.9/bcache-explicitly-destroy-mutex-while-exiting.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "badblocks: fix wrong return value in badblocks_set if badblocks are disabled" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled badblocks: fix wrong return value in badblocks_set if badblocks are disabled to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: badblocks-fix-wrong-return-value-in-badblocks_set-if-badblocks-are-disabled.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Liu Bo <bo.li.liu(a)oracle.com> Date: Fri, 3 Nov 2017 11:24:44 -0600 Subject: badblocks: fix wrong return value in badblocks_set if badblocks are disabled From: Liu Bo <bo.li.liu(a)oracle.com> [ Upstream commit 39b4954c0a1556f8f7f1fdcf59a227117fcd8a0b ] MD's rdev_set_badblocks() expects that badblocks_set() returns 1 if badblocks are disabled, otherwise, rdev_set_badblocks() will record superblock changes and return success in that case and md will fail to report an IO error which it should. This bug has existed since badblocks were introduced in commit 9e0e252a048b ("badblocks: Add core badblock management code"). Signed-off-by: Liu Bo <bo.li.liu(a)oracle.com> Acked-by: Guoqing Jiang <gqjiang(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/badblocks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/block/badblocks.c +++ b/block/badblocks.c @@ -178,7 +178,7 @@ int badblocks_set(struct badblocks *bb, if (bb->shift < 0) /* badblocks are disabled */ - return 0; + return 1; if (bb->shift) { /* round the start down, and the end up */ Patches currently in stable-queue which might be from bo.li.liu(a)oracle.com are queue-4.9/badblocks-fix-wrong-return-value-in-badblocks_set-if-badblocks-are-disabled.patch queue-4.9/btrfs-add-missing-memset-while-reading-compressed-inline-extents.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ath9k: fix tx99 potential info leak" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath9k: fix tx99 potential info leak to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath9k-fix-tx99-potential-info-leak.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Miaoqing Pan <miaoqing(a)codeaurora.org> Date: Wed, 27 Sep 2017 09:13:34 +0800 Subject: ath9k: fix tx99 potential info leak From: Miaoqing Pan <miaoqing(a)codeaurora.org> [ Upstream commit ee0a47186e2fa9aa1c56cadcea470ca0ba8c8692 ] When the user sets count to zero the string buffer would remain completely uninitialized which causes the kernel to parse its own stack data, potentially leading to an info leak. In addition to that, the string might be not terminated properly when the user data does not contain a 0-terminator. Signed-off-by: Miaoqing Pan <miaoqing(a)codeaurora.org> Reviewed-by: Christoph Böhmwalder <christoph(a)boehmwalder.at> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath9k/tx99.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/net/wireless/ath/ath9k/tx99.c +++ b/drivers/net/wireless/ath/ath9k/tx99.c @@ -179,6 +179,9 @@ static ssize_t write_file_tx99(struct fi ssize_t len; int r; + if (count < 1) + return -EINVAL; + if (sc->cur_chan->nvifs > 1) return -EOPNOTSUPP; @@ -186,6 +189,8 @@ static ssize_t write_file_tx99(struct fi if (copy_from_user(buf, user_buf, len)) return -EFAULT; + buf[len] = '\0'; + if (strtobool(buf, &start)) return -EINVAL; Patches currently in stable-queue which might be from miaoqing(a)codeaurora.org are queue-4.9/ath9k-fix-tx99-potential-info-leak.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rsnd-rsnd_ssi_run_mods-needs-to-care-ssi_parent_mod.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Date: Wed, 1 Nov 2017 07:16:58 +0000 Subject: ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 21781e87881f9c420871b1d1f3f29d4cd7bffb10 ] SSI parent mod might be NULL. ssi_parent_mod() needs to care about it. Otherwise, it uses negative shift. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sh/rcar/ssi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -172,10 +172,15 @@ static u32 rsnd_ssi_run_mods(struct rsnd { struct rsnd_mod *ssi_mod = rsnd_io_to_mod_ssi(io); struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io); + u32 mods; - return rsnd_ssi_multi_slaves_runtime(io) | - 1 << rsnd_mod_id(ssi_mod) | - 1 << rsnd_mod_id(ssi_parent_mod); + mods = rsnd_ssi_multi_slaves_runtime(io) | + 1 << rsnd_mod_id(ssi_mod); + + if (ssi_parent_mod) + mods |= 1 << rsnd_mod_id(ssi_parent_mod); + + return mods; } u32 rsnd_ssi_multi_slaves_runtime(struct rsnd_dai_stream *io) Patches currently in stable-queue which might be from kuninori.morimoto.gx(a)renesas.com are queue-4.9/dmaengine-rcar-dmac-use-tcrb-instead-of-tcr-for-residue.patch queue-4.9/asoc-rcar-clear-de-bit-only-in-pdmachcr-when-it-stops.patch queue-4.9/asoc-rsnd-rsnd_ssi_run_mods-needs-to-care-ssi_parent_mod.patch queue-4.9/asoc-rsnd-fix-sound-route-path-when-using-src6-src9.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ASoC: rsnd: fix sound route path when using SRC6/SRC9" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rsnd: fix sound route path when using SRC6/SRC9 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rsnd-fix-sound-route-path-when-using-src6-src9.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Date: Wed, 1 Mar 2017 03:51:00 +0000 Subject: ASoC: rsnd: fix sound route path when using SRC6/SRC9 From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> [ Upstream commit a1c2ff53726907aff5feb37e4cfd45c1ff626431 ] This patch fixes the problem that the missing value of the route path setting table and incorrect values are set in the CMD_ROUTE_SELECT register. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> [Kuninori: shared data on MIX and non-MIX case] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sh/rcar/cmd.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) --- a/sound/soc/sh/rcar/cmd.c +++ b/sound/soc/sh/rcar/cmd.c @@ -31,23 +31,24 @@ static int rsnd_cmd_init(struct rsnd_mod struct rsnd_mod *mix = rsnd_io_to_mod_mix(io); struct device *dev = rsnd_priv_to_dev(priv); u32 data; + u32 path[] = { + [1] = 1 << 0, + [5] = 1 << 8, + [6] = 1 << 12, + [9] = 1 << 15, + }; if (!mix && !dvc) return 0; + if (ARRAY_SIZE(path) < rsnd_mod_id(mod) + 1) + return -ENXIO; + if (mix) { struct rsnd_dai *rdai; struct rsnd_mod *src; struct rsnd_dai_stream *tio; int i; - u32 path[] = { - [0] = 0, - [1] = 1 << 0, - [2] = 0, - [3] = 0, - [4] = 0, - [5] = 1 << 8 - }; /* * it is assuming that integrater is well understanding about @@ -70,16 +71,19 @@ static int rsnd_cmd_init(struct rsnd_mod } else { struct rsnd_mod *src = rsnd_io_to_mod_src(io); - u32 path[] = { - [0] = 0x30000, - [1] = 0x30001, - [2] = 0x40000, - [3] = 0x10000, - [4] = 0x20000, - [5] = 0x40100 + u8 cmd_case[] = { + [0] = 0x3, + [1] = 0x3, + [2] = 0x4, + [3] = 0x1, + [4] = 0x2, + [5] = 0x4, + [6] = 0x1, + [9] = 0x2, }; - data = path[rsnd_mod_id(src)]; + data = path[rsnd_mod_id(src)] | + cmd_case[rsnd_mod_id(src)] << 16; } dev_dbg(dev, "ctu/mix path = 0x%08x", data); Patches currently in stable-queue which might be from hiroyuki.yokoyama.vx(a)renesas.com are queue-4.9/dmaengine-rcar-dmac-use-tcrb-instead-of-tcr-for-residue.patch queue-4.9/asoc-rcar-clear-de-bit-only-in-pdmachcr-when-it-stops.patch queue-4.9/asoc-rsnd-fix-sound-route-path-when-using-src6-src9.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ASoC: rcar: clear DE bit only in PDMACHCR when it stops" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rcar: clear DE bit only in PDMACHCR when it stops to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rcar-clear-de-bit-only-in-pdmachcr-when-it-stops.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Date: Tue, 14 Mar 2017 09:34:49 +0900 Subject: ASoC: rcar: clear DE bit only in PDMACHCR when it stops From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 62a10498afb27370ec6018e9d802b74850fd8d9a ] R-Car datasheet indicates "Clear DE in PDMACHCR" for transfer stop, but current code clears all bits in PDMACHCR. Because of this, DE bit might never been cleared, and it causes CMD overflow. This patch fixes this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sh/rcar/dma.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -361,6 +361,20 @@ static u32 rsnd_dmapp_read(struct rsnd_d return ioread32(rsnd_dmapp_addr(dmac, dma, reg)); } +static void rsnd_dmapp_bset(struct rsnd_dma *dma, u32 data, u32 mask, u32 reg) +{ + struct rsnd_mod *mod = rsnd_mod_get(dma); + struct rsnd_priv *priv = rsnd_mod_to_priv(mod); + struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv); + volatile void __iomem *addr = rsnd_dmapp_addr(dmac, dma, reg); + u32 val = ioread32(addr); + + val &= ~mask; + val |= (data & mask); + + iowrite32(val, addr); +} + static int rsnd_dmapp_stop(struct rsnd_mod *mod, struct rsnd_dai_stream *io, struct rsnd_priv *priv) @@ -368,10 +382,10 @@ static int rsnd_dmapp_stop(struct rsnd_m struct rsnd_dma *dma = rsnd_mod_to_dma(mod); int i; - rsnd_dmapp_write(dma, 0, PDMACHCR); + rsnd_dmapp_bset(dma, 0, PDMACHCR_DE, PDMACHCR); for (i = 0; i < 1024; i++) { - if (0 == rsnd_dmapp_read(dma, PDMACHCR)) + if (0 == (rsnd_dmapp_read(dma, PDMACHCR) & PDMACHCR_DE)) return 0; udelay(1); } Patches currently in stable-queue which might be from kuninori.morimoto.gx(a)renesas.com are queue-4.9/dmaengine-rcar-dmac-use-tcrb-instead-of-tcr-for-residue.patch queue-4.9/asoc-rcar-clear-de-bit-only-in-pdmachcr-when-it-stops.patch queue-4.9/asoc-rsnd-rsnd_ssi_run_mods-needs-to-care-ssi_parent_mod.patch queue-4.9/asoc-rsnd-fix-sound-route-path-when-using-src6-src9.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-intel-skylake-fix-uuid_module-memory-leak-in-failure-case.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya(a)intel.com> Date: Tue, 7 Nov 2017 16:16:19 +0530 Subject: ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case From: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya(a)intel.com> [ Upstream commit f8e066521192c7debe59127d90abbe2773577e25 ] In the loop that adds the uuid_module to the uuid_list list, allocated memory is not properly freed in the error path free uuid_list whenever any of the memory allocation in the loop fails to avoid memory leak. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya(a)intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh(a)intel.com> Acked-By: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/skylake/skl-sst-utils.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -295,6 +295,7 @@ int snd_skl_parse_uuids(struct sst_dsp * struct uuid_module *module; struct firmware stripped_fw; unsigned int safe_file; + int ret = 0; /* Get the FW pointer to derive ADSP header */ stripped_fw.data = fw->data; @@ -343,8 +344,10 @@ int snd_skl_parse_uuids(struct sst_dsp * for (i = 0; i < num_entry; i++, mod_entry++) { module = kzalloc(sizeof(*module), GFP_KERNEL); - if (!module) - return -ENOMEM; + if (!module) { + ret = -ENOMEM; + goto free_uuid_list; + } uuid_bin = (uuid_le *)mod_entry->uuid.id; memcpy(&module->uuid, uuid_bin, sizeof(module->uuid)); @@ -355,8 +358,8 @@ int snd_skl_parse_uuids(struct sst_dsp * size = sizeof(int) * mod_entry->instance_max_count; module->instance_id = devm_kzalloc(ctx->dev, size, GFP_KERNEL); if (!module->instance_id) { - kfree(module); - return -ENOMEM; + ret = -ENOMEM; + goto free_uuid_list; } list_add_tail(&module->list, &skl->uuid_list); @@ -367,6 +370,10 @@ int snd_skl_parse_uuids(struct sst_dsp * } return 0; + +free_uuid_list: + skl_freeup_uuid_list(skl); + return ret; } void skl_freeup_uuid_list(struct skl_sst *ctx) Patches currently in stable-queue which might be from pankaj.laxminarayan.bharadiya(a)intel.com are queue-4.9/asoc-intel-skylake-fix-uuid_module-memory-leak-in-failure-case.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm64-prevent-regressions-in-compressed-kernel-image-size-when-upgrading-to-binutils-2.27.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Nick Desaulniers <ndesaulniers(a)google.com> Date: Fri, 27 Oct 2017 09:33:41 -0700 Subject: arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27 From: Nick Desaulniers <ndesaulniers(a)google.com> [ Upstream commit fd9dde6abcb9bfe6c6bee48834e157999f113971 ] Upon upgrading to binutils 2.27, we found that our lz4 and gzip compressed kernel images were significantly larger, resulting is 10ms boot time regressions. As noted by Rahul: "aarch64 binaries uses RELA relocations, where each relocation entry includes an addend value. This is similar to x86_64. On x86_64, the addend values are also stored at the relocation offset for relative relocations. This is an optimization: in the case where code does not need to be relocated, the loader can simply skip processing relative relocations. In binutils-2.25, both bfd and gold linkers did this for x86_64, but only the gold linker did this for aarch64. The kernel build here is using the bfd linker, which stored zeroes at the relocation offsets for relative relocations. Since a set of zeroes compresses better than a set of non-zero addend values, this behavior was resulting in much better lz4 compression. The bfd linker in binutils-2.27 is now storing the actual addend values at the relocation offsets. The behavior is now consistent with what it does for x86_64 and what gold linker does for both architectures. The change happened in this upstream commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=1f56df9d0d5ad8980… Since a bunch of zeroes got replaced by non-zero addend values, we see the side effect of lz4 compressed image being a bit bigger. To get the old behavior from the bfd linker, "--no-apply-dynamic-relocs" flag can be used: $ LDFLAGS="--no-apply-dynamic-relocs" make With this flag, the compressed image size is back to what it was with binutils-2.25. If the kernel is using ASLR, there aren't additional runtime costs to --no-apply-dynamic-relocs, as the relocations will need to be applied again anyway after the kernel is relocated to a random address. If the kernel is not using ASLR, then presumably the current default behavior of the linker is better. Since the static linker performed the dynamic relocs, and the kernel is not moved to a different address at load time, it can skip applying the relocations all over again." Some measurements: $ ld -v GNU ld (binutils-2.25-f3d35cf6) 2.25.51.20141117 ^ $ ls -l vmlinux -rwxr-x--- 1 ndesaulniers eng 300652760 Oct 26 11:57 vmlinux $ ls -l Image.lz4-dtb -rw-r----- 1 ndesaulniers eng 16932627 Oct 26 11:57 Image.lz4-dtb $ ld -v GNU ld (binutils-2.27-53dd00a1) 2.27.0.20170315 ^ pre patch: $ ls -l vmlinux -rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 11:43 vmlinux $ ls -l Image.lz4-dtb -rw-r----- 1 ndesaulniers eng 18159474 Oct 26 11:43 Image.lz4-dtb post patch: $ ls -l vmlinux -rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 12:06 vmlinux $ ls -l Image.lz4-dtb -rw-r----- 1 ndesaulniers eng 16932466 Oct 26 12:06 Image.lz4-dtb By Siqi's measurement w/ gzip: binutils 2.27 with this patch (with --no-apply-dynamic-relocs): Image 41535488 Image.gz 13404067 binutils 2.27 without this patch (without --no-apply-dynamic-relocs): Image 41535488 Image.gz 14125516 Any compression scheme should be able to get better results from the longer runs of zeros, not just GZIP and LZ4. 10ms boot time savings isn't anything to get excited about, but users of arm64+compression+bfd-2.27 should not have to pay a penalty for no runtime improvement. Reported-by: Gopinath Elanchezhian <gelanchezhian(a)google.com> Reported-by: Sindhuri Pentyala <spentyala(a)google.com> Reported-by: Wei Wang <wvw(a)google.com> Suggested-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Suggested-by: Rahul Chaudhry <rahulchaudhry(a)google.com> Suggested-by: Siqi Lin <siqilin(a)google.com> Suggested-by: Stephen Hines <srhines(a)google.com> Signed-off-by: Nick Desaulniers <ndesaulniers(a)google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> [will: added comment to Makefile] Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm64/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -14,8 +14,12 @@ LDFLAGS_vmlinux :=-p --no-undefined -X CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) GZFLAGS :=-9 -ifneq ($(CONFIG_RELOCATABLE),) -LDFLAGS_vmlinux += -pie -shared -Bsymbolic +ifeq ($(CONFIG_RELOCATABLE), y) +# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour +# for relative relocs, since this leads to better Image compression +# with the relocation offsets always being zero. +LDFLAGS_vmlinux += -pie -shared -Bsymbolic \ + $(call ld-option, --no-apply-dynamic-relocs) endif ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) Patches currently in stable-queue which might be from ndesaulniers(a)google.com are queue-4.9/arm64-prevent-regressions-in-compressed-kernel-image-size-when-upgrading-to-binutils-2.27.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "arm-ccn: perf: Prevent module unload while PMU is in use" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm-ccn: perf: Prevent module unload while PMU is in use to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-ccn-perf-prevent-module-unload-while-pmu-is-in-use.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:35 CET 2017 From: Suzuki K Poulose <suzuki.poulose(a)arm.com> Date: Fri, 3 Nov 2017 11:45:18 +0000 Subject: arm-ccn: perf: Prevent module unload while PMU is in use From: Suzuki K Poulose <suzuki.poulose(a)arm.com> [ Upstream commit c7f5828bf77dcbd61d51f4736c1d5aa35663fbb4 ] When the PMU driver is built as a module, the perf expects the pmu->module to be valid, so that the driver is prevented from being unloaded while it is in use. Fix the CCN pmu driver to fill in this field. Fixes: a33b0daab73a0 ("bus: ARM CCN PMU driver") Cc: Pawel Moll <pawel.moll(a)arm.com> Cc: Will Deacon <will.deacon(a)arm.com> Acked-by: Mark Rutland <mark.rutland(a)arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/arm-ccn.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -1280,6 +1280,7 @@ static int arm_ccn_pmu_init(struct arm_c /* Perf driver registration */ ccn->dt.pmu = (struct pmu) { + .module = THIS_MODULE, .attr_groups = arm_ccn_pmu_attr_groups, .task_ctx_nr = perf_invalid_context, .event_init = arm_ccn_pmu_event_init, Patches currently in stable-queue which might be from suzuki.poulose(a)arm.com are queue-4.9/arm-ccn-perf-prevent-module-unload-while-pmu-is-in-use.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Prevent callback expiry timer overflow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Prevent callback expiry timer overflow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-prevent-callback-expiry-timer-overflow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Tina Ruchandani <ruchandani.tina(a)gmail.com> Date: Thu, 16 Mar 2017 16:27:46 +0000 Subject: afs: Prevent callback expiry timer overflow From: Tina Ruchandani <ruchandani.tina(a)gmail.com> [ Upstream commit 56e714312e7dbd6bb83b2f78d3ec19a404c7649f ] get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs_vnode record to use ktime_get_real_seconds() instead, for the fields cb_expires and cb_expires_at. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/fsclient.c | 2 +- fs/afs/inode.c | 7 ++++--- fs/afs/internal.h | 4 ++-- 3 files changed, 7 insertions(+), 6 deletions(-) --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -139,7 +139,7 @@ static void xdr_decode_AFSCallBack(const vnode->cb_version = ntohl(*bp++); vnode->cb_expiry = ntohl(*bp++); vnode->cb_type = ntohl(*bp++); - vnode->cb_expires = vnode->cb_expiry + get_seconds(); + vnode->cb_expires = vnode->cb_expiry + ktime_get_real_seconds(); *_bp = bp; } --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -245,12 +245,13 @@ struct inode *afs_iget(struct super_bloc vnode->cb_version = 0; vnode->cb_expiry = 0; vnode->cb_type = 0; - vnode->cb_expires = get_seconds(); + vnode->cb_expires = ktime_get_real_seconds(); } else { vnode->cb_version = cb->version; vnode->cb_expiry = cb->expiry; vnode->cb_type = cb->type; - vnode->cb_expires = vnode->cb_expiry + get_seconds(); + vnode->cb_expires = vnode->cb_expiry + + ktime_get_real_seconds(); } } @@ -323,7 +324,7 @@ int afs_validate(struct afs_vnode *vnode !test_bit(AFS_VNODE_CB_BROKEN, &vnode->flags) && !test_bit(AFS_VNODE_MODIFIED, &vnode->flags) && !test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) { - if (vnode->cb_expires < get_seconds() + 10) { + if (vnode->cb_expires < ktime_get_real_seconds() + 10) { _debug("callback expired"); set_bit(AFS_VNODE_CB_BROKEN, &vnode->flags); } else { --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -373,8 +373,8 @@ struct afs_vnode { struct rb_node server_rb; /* link in server->fs_vnodes */ struct rb_node cb_promise; /* link in server->cb_promises */ struct work_struct cb_broken_work; /* work to be done on callback break */ - time_t cb_expires; /* time at which callback expires */ - time_t cb_expires_at; /* time used to order cb_promise */ + time64_t cb_expires; /* time at which callback expires */ + time64_t cb_expires_at; /* time used to order cb_promise */ unsigned cb_version; /* callback version */ unsigned cb_expiry; /* callback expiry time */ afs_callback_type_t cb_type; /* type of callback */ Patches currently in stable-queue which might be from ruchandani.tina(a)gmail.com are queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Populate group ID from vnode status" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Populate group ID from vnode status to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-populate-group-id-from-vnode-status.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Marc Dionne <marc.dionne(a)auristor.com> Date: Thu, 16 Mar 2017 16:27:43 +0000 Subject: afs: Populate group ID from vnode status From: Marc Dionne <marc.dionne(a)auristor.com> [ Upstream commit 6186f0788b31f44affceeedc7b48eb10faea120d ] The group was hard coded to GLOBAL_ROOT_GID; use the group ID that was received from the server. Signed-off-by: Marc Dionne <marc.dionne(a)auristor.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -70,7 +70,7 @@ static int afs_inode_map_status(struct a set_nlink(inode, vnode->status.nlink); inode->i_uid = vnode->status.owner; - inode->i_gid = GLOBAL_ROOT_GID; + inode->i_gid = vnode->status.group; inode->i_size = vnode->status.size; inode->i_ctime.tv_sec = vnode->status.mtime_server; inode->i_ctime.tv_nsec = 0; Patches currently in stable-queue which might be from marc.dionne(a)auristor.com are queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-deal-with-an-empty-callback-array.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Populate and use client modification time" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Populate and use client modification time to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-populate-and-use-client-modification-time.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Marc Dionne <marc.dionne(a)auristor.com> Date: Thu, 16 Mar 2017 16:27:47 +0000 Subject: afs: Populate and use client modification time From: Marc Dionne <marc.dionne(a)auristor.com> [ Upstream commit ab94f5d0dd6fd82e7eeca5e7c8096eaea0a0261f ] The inode timestamps should be set from the client time in the status received from the server, rather than the server time which is meant for internal server use. Set AFS_SET_MTIME and populate the mtime for operations that take an input status, such as file/dir creation and StoreData. If an input time is not provided the server will set the vnode times based on the current server time. In a situation where the server has some skew with the client, this could lead to the client seeing a timestamp in the future for a file that it just created or wrote. Signed-off-by: Marc Dionne <marc.dionne(a)auristor.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/fsclient.c | 18 +++++++++--------- fs/afs/inode.c | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-) --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -105,7 +105,7 @@ static void xdr_decode_AFSFetchStatus(co vnode->vfs_inode.i_mode = mode; } - vnode->vfs_inode.i_ctime.tv_sec = status->mtime_server; + vnode->vfs_inode.i_ctime.tv_sec = status->mtime_client; vnode->vfs_inode.i_mtime = vnode->vfs_inode.i_ctime; vnode->vfs_inode.i_atime = vnode->vfs_inode.i_ctime; vnode->vfs_inode.i_version = data_version; @@ -676,8 +676,8 @@ int afs_fs_create(struct afs_server *ser memset(bp, 0, padsz); bp = (void *) bp + padsz; } - *bp++ = htonl(AFS_SET_MODE); - *bp++ = 0; /* mtime */ + *bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME); + *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */ *bp++ = 0; /* owner */ *bp++ = 0; /* group */ *bp++ = htonl(mode & S_IALLUGO); /* unix mode */ @@ -945,8 +945,8 @@ int afs_fs_symlink(struct afs_server *se memset(bp, 0, c_padsz); bp = (void *) bp + c_padsz; } - *bp++ = htonl(AFS_SET_MODE); - *bp++ = 0; /* mtime */ + *bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME); + *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */ *bp++ = 0; /* owner */ *bp++ = 0; /* group */ *bp++ = htonl(S_IRWXUGO); /* unix mode */ @@ -1145,8 +1145,8 @@ static int afs_fs_store_data64(struct af *bp++ = htonl(vnode->fid.vnode); *bp++ = htonl(vnode->fid.unique); - *bp++ = 0; /* mask */ - *bp++ = 0; /* mtime */ + *bp++ = htonl(AFS_SET_MTIME); /* mask */ + *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */ *bp++ = 0; /* owner */ *bp++ = 0; /* group */ *bp++ = 0; /* unix mode */ @@ -1222,8 +1222,8 @@ int afs_fs_store_data(struct afs_server *bp++ = htonl(vnode->fid.vnode); *bp++ = htonl(vnode->fid.unique); - *bp++ = 0; /* mask */ - *bp++ = 0; /* mtime */ + *bp++ = htonl(AFS_SET_MTIME); /* mask */ + *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */ *bp++ = 0; /* owner */ *bp++ = 0; /* group */ *bp++ = 0; /* unix mode */ --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -72,7 +72,7 @@ static int afs_inode_map_status(struct a inode->i_uid = vnode->status.owner; inode->i_gid = vnode->status.group; inode->i_size = vnode->status.size; - inode->i_ctime.tv_sec = vnode->status.mtime_server; + inode->i_ctime.tv_sec = vnode->status.mtime_client; inode->i_ctime.tv_nsec = 0; inode->i_atime = inode->i_mtime = inode->i_ctime; inode->i_blocks = 0; Patches currently in stable-queue which might be from marc.dionne(a)auristor.com are queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-deal-with-an-empty-callback-array.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Migrate vlocation fields to 64-bit" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Migrate vlocation fields to 64-bit to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-migrate-vlocation-fields-to-64-bit.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Tina Ruchandani <ruchandani.tina(a)gmail.com> Date: Thu, 16 Mar 2017 16:27:46 +0000 Subject: afs: Migrate vlocation fields to 64-bit From: Tina Ruchandani <ruchandani.tina(a)gmail.com> [ Upstream commit 8a79790bf0b7da216627ffb85f52cfb4adbf1e4e ] get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs's vlocation record to use ktime_get_real_seconds() instead, for the fields time_of_death and update_at. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/callback.c | 7 ++++--- fs/afs/internal.h | 7 ++++--- fs/afs/server.c | 6 +++--- fs/afs/vlocation.c | 16 +++++++++------- 4 files changed, 20 insertions(+), 16 deletions(-) --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -362,7 +362,7 @@ static void afs_callback_updater(struct { struct afs_server *server; struct afs_vnode *vnode, *xvnode; - time_t now; + time64_t now; long timeout; int ret; @@ -370,7 +370,7 @@ static void afs_callback_updater(struct _enter(""); - now = get_seconds(); + now = ktime_get_real_seconds(); /* find the first vnode to update */ spin_lock(&server->cb_lock); @@ -424,7 +424,8 @@ static void afs_callback_updater(struct /* and then reschedule */ _debug("reschedule"); - vnode->update_at = get_seconds() + afs_vnode_update_timeout; + vnode->update_at = ktime_get_real_seconds() + + afs_vnode_update_timeout; spin_lock(&server->cb_lock); --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -11,6 +11,7 @@ #include <linux/compiler.h> #include <linux/kernel.h> +#include <linux/ktime.h> #include <linux/fs.h> #include <linux/pagemap.h> #include <linux/rxrpc.h> @@ -245,7 +246,7 @@ struct afs_cache_vhash { */ struct afs_vlocation { atomic_t usage; - time_t time_of_death; /* time at which put reduced usage to 0 */ + time64_t time_of_death; /* time at which put reduced usage to 0 */ struct list_head link; /* link in cell volume location list */ struct list_head grave; /* link in master graveyard list */ struct list_head update; /* link in master update list */ @@ -256,7 +257,7 @@ struct afs_vlocation { struct afs_cache_vlocation vldb; /* volume information DB record */ struct afs_volume *vols[3]; /* volume access record pointer (index by type) */ wait_queue_head_t waitq; /* status change waitqueue */ - time_t update_at; /* time at which record should be updated */ + time64_t update_at; /* time at which record should be updated */ spinlock_t lock; /* access lock */ afs_vlocation_state_t state; /* volume location state */ unsigned short upd_rej_cnt; /* ENOMEDIUM count during update */ @@ -269,7 +270,7 @@ struct afs_vlocation { */ struct afs_server { atomic_t usage; - time_t time_of_death; /* time at which put reduced usage to 0 */ + time64_t time_of_death; /* time at which put reduced usage to 0 */ struct in_addr addr; /* server address */ struct afs_cell *cell; /* cell in which server resides */ struct list_head link; /* link in cell's server list */ --- a/fs/afs/server.c +++ b/fs/afs/server.c @@ -242,7 +242,7 @@ void afs_put_server(struct afs_server *s spin_lock(&afs_server_graveyard_lock); if (atomic_read(&server->usage) == 0) { list_move_tail(&server->grave, &afs_server_graveyard); - server->time_of_death = get_seconds(); + server->time_of_death = ktime_get_real_seconds(); queue_delayed_work(afs_wq, &afs_server_reaper, afs_server_timeout * HZ); } @@ -277,9 +277,9 @@ static void afs_reap_server(struct work_ LIST_HEAD(corpses); struct afs_server *server; unsigned long delay, expiry; - time_t now; + time64_t now; - now = get_seconds(); + now = ktime_get_real_seconds(); spin_lock(&afs_server_graveyard_lock); while (!list_empty(&afs_server_graveyard)) { --- a/fs/afs/vlocation.c +++ b/fs/afs/vlocation.c @@ -340,7 +340,8 @@ static void afs_vlocation_queue_for_upda struct afs_vlocation *xvl; /* wait at least 10 minutes before updating... */ - vl->update_at = get_seconds() + afs_vlocation_update_timeout; + vl->update_at = ktime_get_real_seconds() + + afs_vlocation_update_timeout; spin_lock(&afs_vlocation_updates_lock); @@ -506,7 +507,7 @@ void afs_put_vlocation(struct afs_vlocat if (atomic_read(&vl->usage) == 0) { _debug("buried"); list_move_tail(&vl->grave, &afs_vlocation_graveyard); - vl->time_of_death = get_seconds(); + vl->time_of_death = ktime_get_real_seconds(); queue_delayed_work(afs_wq, &afs_vlocation_reap, afs_vlocation_timeout * HZ); @@ -543,11 +544,11 @@ static void afs_vlocation_reaper(struct LIST_HEAD(corpses); struct afs_vlocation *vl; unsigned long delay, expiry; - time_t now; + time64_t now; _enter(""); - now = get_seconds(); + now = ktime_get_real_seconds(); spin_lock(&afs_vlocation_graveyard_lock); while (!list_empty(&afs_vlocation_graveyard)) { @@ -622,13 +623,13 @@ static void afs_vlocation_updater(struct { struct afs_cache_vlocation vldb; struct afs_vlocation *vl, *xvl; - time_t now; + time64_t now; long timeout; int ret; _enter(""); - now = get_seconds(); + now = ktime_get_real_seconds(); /* find a record to update */ spin_lock(&afs_vlocation_updates_lock); @@ -684,7 +685,8 @@ static void afs_vlocation_updater(struct /* and then reschedule */ _debug("reschedule"); - vl->update_at = get_seconds() + afs_vlocation_update_timeout; + vl->update_at = ktime_get_real_seconds() + + afs_vlocation_update_timeout; spin_lock(&afs_vlocation_updates_lock); Patches currently in stable-queue which might be from ruchandani.tina(a)gmail.com are queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Invalid op ID should abort with RXGEN_OPCODE" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Invalid op ID should abort with RXGEN_OPCODE to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-invalid-op-id-should-abort-with-rxgen_opcode.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:47 +0000 Subject: afs: Invalid op ID should abort with RXGEN_OPCODE From: David Howells <dhowells(a)redhat.com> [ Upstream commit 1157f153f37a8586765034470e4f00a4a6c4ce6f ] When we are given an invalid operation ID, we should abort that with RXGEN_OPCODE rather than RX_INVALID_OPERATION. Also map RXGEN_OPCODE to -ENOTSUPP. Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/misc.c | 2 ++ fs/afs/rxrpc.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) --- a/fs/afs/misc.c +++ b/fs/afs/misc.c @@ -84,6 +84,8 @@ int afs_abort_to_error(u32 abort_code) case RXKADDATALEN: return -EKEYREJECTED; case RXKADILLEGALLEVEL: return -EKEYREJECTED; + case RXGEN_OPCODE: return -ENOTSUPP; + default: return -EREMOTEIO; } } --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -440,7 +440,7 @@ static void afs_deliver_to_call(struct a abort_code, -ret, "KNC"); goto do_abort; case -ENOTSUPP: - abort_code = RX_INVALID_OPERATION; + abort_code = RXGEN_OPCODE; rxrpc_kernel_abort_call(afs_socket, call->rxcall, abort_code, -ret, "KIV"); goto do_abort; Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Flush outstanding writes when an fd is closed" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Flush outstanding writes when an fd is closed to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-flush-outstanding-writes-when-an-fd-is-closed.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:45 +0000 Subject: afs: Flush outstanding writes when an fd is closed From: David Howells <dhowells(a)redhat.com> [ Upstream commit 58fed94dfb17e89556b5705f20f90e5b2971b6a1 ] Flush outstanding writes in afs when an fd is closed. This is what NFS and CIFS do. Reported-by: Marc Dionne <marc.c.dionne(a)gmail.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/file.c | 1 + fs/afs/internal.h | 1 + fs/afs/write.c | 14 ++++++++++++++ 3 files changed, 16 insertions(+) --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -29,6 +29,7 @@ static int afs_readpages(struct file *fi const struct file_operations afs_file_operations = { .open = afs_open, + .flush = afs_flush, .release = afs_release, .llseek = generic_file_llseek, .read_iter = generic_file_read_iter, --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -752,6 +752,7 @@ extern int afs_writepages(struct address extern void afs_pages_written_back(struct afs_vnode *, struct afs_call *); extern ssize_t afs_file_write(struct kiocb *, struct iov_iter *); extern int afs_writeback_all(struct afs_vnode *); +extern int afs_flush(struct file *, fl_owner_t); extern int afs_fsync(struct file *, loff_t, loff_t, int); --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -736,6 +736,20 @@ out: } /* + * Flush out all outstanding writes on a file opened for writing when it is + * closed. + */ +int afs_flush(struct file *file, fl_owner_t id) +{ + _enter(""); + + if ((file->f_mode & FMODE_WRITE) == 0) + return 0; + + return vfs_fsync(file, 0); +} + +/* * notification that a previously read-only page is about to become writable * - if it returns an error, the caller will deliver a bus error signal */ Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Fix the maths in afs_fs_store_data()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Fix the maths in afs_fs_store_data() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-fix-the-maths-in-afs_fs_store_data.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:47 +0000 Subject: afs: Fix the maths in afs_fs_store_data() From: David Howells <dhowells(a)redhat.com> [ Upstream commit 146a1192783697810b63a1e41c4d59fc93387340 ] afs_fs_store_data() works out of the size of the write it's going to make, but it uses 32-bit unsigned subtraction in one place that gets automatically cast to loff_t. However, if to < offset, then the number goes negative, but as the result isn't signed, this doesn't get sign-extended to 64-bits when placed in a loff_t. Fix by casting the operands to loff_t. Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/fsclient.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -1178,7 +1178,7 @@ int afs_fs_store_data(struct afs_server _enter(",%x,{%x:%u},,", key_serial(wb->key), vnode->fid.vid, vnode->fid.vnode); - size = to - offset; + size = (loff_t)to - (loff_t)offset; if (first != last) size += (loff_t)(last - first) << PAGE_SHIFT; pos = (loff_t)first << PAGE_SHIFT; Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Fix page leak in afs_write_begin()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Fix page leak in afs_write_begin() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-fix-page-leak-in-afs_write_begin.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:48 +0000 Subject: afs: Fix page leak in afs_write_begin() From: David Howells <dhowells(a)redhat.com> [ Upstream commit 6d06b0d25209c80e99c1e89700f1e09694a3766b ] afs_write_begin() leaks a ref and a lock on a page if afs_fill_page() fails. Fix the leak by unlocking and releasing the page in the error path. Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/write.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -148,12 +148,12 @@ int afs_write_begin(struct file *file, s kfree(candidate); return -ENOMEM; } - *pagep = page; - /* page won't leak in error case: it eventually gets cleaned off LRU */ if (!PageUptodate(page) && len != PAGE_SIZE) { ret = afs_fill_page(vnode, key, index << PAGE_SHIFT, page); if (ret < 0) { + unlock_page(page); + put_page(page); kfree(candidate); _leave(" = %d [prep]", ret); return ret; @@ -161,6 +161,9 @@ int afs_write_begin(struct file *file, s SetPageUptodate(page); } + /* page won't leak in error case: it eventually gets cleaned off LRU */ + *pagep = page; + try_again: spin_lock(&vnode->writeback_lock); Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Fix missing put_page()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Fix missing put_page() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-fix-missing-put_page.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:43 +0000 Subject: afs: Fix missing put_page() From: David Howells <dhowells(a)redhat.com> [ Upstream commit 29c8bbbd6e21daa0997d1c3ee886b897ee7ad652 ] In afs_writepages_region(), inside the loop where we find dirty pages to deal with, one of the if-statements is missing a put_page(). Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/write.c | 1 + 1 file changed, 1 insertion(+) --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -502,6 +502,7 @@ static int afs_writepages_region(struct if (PageWriteback(page) || !PageDirty(page)) { unlock_page(page); + put_page(page); continue; } Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Fix afs_kill_pages()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Fix afs_kill_pages() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-fix-afs_kill_pages.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:48 +0000 Subject: afs: Fix afs_kill_pages() From: David Howells <dhowells(a)redhat.com> [ Upstream commit 7286a35e893176169b09715096a4aca557e2ccd2 ] Fix afs_kill_pages() in two ways: (1) If a writeback has been partially flushed, then if we try and kill the pages it contains, some of them may no longer be undergoing writeback and end_page_writeback() will assert. Fix this by checking to see whether the page in question is actually undergoing writeback before ending that writeback. (2) The loop that scans for pages to kill doesn't increase the first page index, and so the loop may not terminate, but it will try to process the same pages over and over again. Fix this by increasing the first page index to one after the last page we processed. Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/write.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -299,10 +299,14 @@ static void afs_kill_pages(struct afs_vn ASSERTCMP(pv.nr, ==, count); for (loop = 0; loop < count; loop++) { - ClearPageUptodate(pv.pages[loop]); + struct page *page = pv.pages[loop]; + ClearPageUptodate(page); if (error) - SetPageError(pv.pages[loop]); - end_page_writeback(pv.pages[loop]); + SetPageError(page); + if (PageWriteback(page)) + end_page_writeback(page); + if (page->index >= first) + first = page->index + 1; } __pagevec_release(&pv); Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Fix abort on signal while waiting for call completion" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Fix abort on signal while waiting for call completion to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-fix-abort-on-signal-while-waiting-for-call-completion.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:49 +0000 Subject: afs: Fix abort on signal while waiting for call completion From: David Howells <dhowells(a)redhat.com> [ Upstream commit 954cd6dc02a65065aecb7150962c0870c5b0e322 ] Fix the way in which a call that's in progress and being waited for is aborted in the case that EINTR is detected. We should be sending RX_USER_ABORT rather than RX_CALL_DEAD as the abort code. Note that since the only two ways out of the loop are if the call completes or if a signal happens, the kill-the-call clause after the loop has finished can only happen in the case of EINTR. This means that we only have one abort case to deal with, not two, and the "KWC" case can never happen and so can be deleted. Note further that simply aborting the call isn't necessarily the best thing here since at this point: the request has been entirely sent and it's likely the server will do the operation anyway - whether we abort it or not. In future, we should punt the handling of the remainder of the call off to a background thread. Reported-by: Marc Dionne <marc.c.dionne(a)auristor.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/rxrpc.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -492,7 +492,6 @@ call_complete: */ static int afs_wait_for_call_to_complete(struct afs_call *call) { - const char *abort_why; int ret; DECLARE_WAITQUEUE(myself, current); @@ -511,13 +510,8 @@ static int afs_wait_for_call_to_complete continue; } - abort_why = "KWC"; - ret = call->error; - if (call->state == AFS_CALL_COMPLETE) - break; - abort_why = "KWI"; - ret = -EINTR; - if (signal_pending(current)) + if (call->state == AFS_CALL_COMPLETE || + signal_pending(current)) break; schedule(); } @@ -525,15 +519,14 @@ static int afs_wait_for_call_to_complete remove_wait_queue(&call->waitq, &myself); __set_current_state(TASK_RUNNING); - /* kill the call */ + /* Kill off the call if it's still live. */ if (call->state < AFS_CALL_COMPLETE) { - _debug("call incomplete"); + _debug("call interrupted"); rxrpc_kernel_abort_call(afs_socket, call->rxcall, - RX_CALL_DEAD, -ret, abort_why); - } else if (call->error < 0) { - ret = call->error; + RX_USER_ABORT, -EINTR, "KWI"); } + ret = call->error; _debug("call complete"); afs_end_call(call); _leave(" = %d", ret); Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Deal with an empty callback array" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Deal with an empty callback array to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-deal-with-an-empty-callback-array.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Marc Dionne <marc.dionne(a)auristor.com> Date: Thu, 16 Mar 2017 16:27:44 +0000 Subject: afs: Deal with an empty callback array From: Marc Dionne <marc.dionne(a)auristor.com> [ Upstream commit bcd89270d93b7edebb5de5e5e7dca1a77a33496e ] Servers may send a callback array that is the same size as the FID array, or an empty array. If the callback count is 0, the code would attempt to read (fid_count * 12) bytes of data, which would fail and result in an unmarshalling error. This would lead to stale data for remotely modified files or directories. Store the callback array size in the internal afs_call structure and use that to determine the amount of data to read. Signed-off-by: Marc Dionne <marc.dionne(a)auristor.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/cmservice.c | 11 +++++------ fs/afs/internal.h | 5 ++++- 2 files changed, 9 insertions(+), 7 deletions(-) --- a/fs/afs/cmservice.c +++ b/fs/afs/cmservice.c @@ -168,7 +168,6 @@ static int afs_deliver_cb_callback(struc struct afs_callback *cb; struct afs_server *server; __be32 *bp; - u32 tmp; int ret, loop; _enter("{%u}", call->unmarshall); @@ -230,9 +229,9 @@ static int afs_deliver_cb_callback(struc if (ret < 0) return ret; - tmp = ntohl(call->tmp); - _debug("CB count: %u", tmp); - if (tmp != call->count && tmp != 0) + call->count2 = ntohl(call->tmp); + _debug("CB count: %u", call->count2); + if (call->count2 != call->count && call->count2 != 0) return -EBADMSG; call->offset = 0; call->unmarshall++; @@ -240,14 +239,14 @@ static int afs_deliver_cb_callback(struc case 4: _debug("extract CB array"); ret = afs_extract_data(call, call->buffer, - call->count * 3 * 4, false); + call->count2 * 3 * 4, false); if (ret < 0) return ret; _debug("unmarshall CB array"); cb = call->request; bp = call->buffer; - for (loop = call->count; loop > 0; loop--, cb++) { + for (loop = call->count2; loop > 0; loop--, cb++) { cb->version = ntohl(*bp++); cb->expiry = ntohl(*bp++); cb->type = ntohl(*bp++); --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -105,7 +105,10 @@ struct afs_call { unsigned request_size; /* size of request data */ unsigned reply_max; /* maximum size of reply */ unsigned first_offset; /* offset into mapping[first] */ - unsigned last_to; /* amount of mapping[last] */ + union { + unsigned last_to; /* amount of mapping[last] */ + unsigned count2; /* count used in unmarshalling */ + }; unsigned char unmarshall; /* unmarshalling phase */ bool incoming; /* T if incoming call */ bool send_pages; /* T if data from mapping should be sent */ Patches currently in stable-queue which might be from marc.dionne(a)auristor.com are queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-deal-with-an-empty-callback-array.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Better abort and net error handling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Better abort and net error handling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-better-abort-and-net-error-handling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: David Howells <dhowells(a)redhat.com> Date: Thu, 16 Mar 2017 16:27:47 +0000 Subject: afs: Better abort and net error handling From: David Howells <dhowells(a)redhat.com> [ Upstream commit 70af0e3bd65142f9e674961c975451638a7ce1d5 ] If we receive a network error, a remote abort or a protocol error whilst we're still transmitting data, make sure we return an appropriate error to the caller rather than ESHUTDOWN or ECONNABORTED. Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/rxrpc.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -321,6 +321,8 @@ int afs_make_call(struct in_addr *addr, struct rxrpc_call *rxcall; struct msghdr msg; struct kvec iov[1]; + size_t offset; + u32 abort_code; int ret; _enter("%x,{%d},", addr->s_addr, ntohs(call->port)); @@ -368,9 +370,11 @@ int afs_make_call(struct in_addr *addr, msg.msg_controllen = 0; msg.msg_flags = (call->send_pages ? MSG_MORE : 0); - /* have to change the state *before* sending the last packet as RxRPC - * might give us the reply before it returns from sending the - * request */ + /* We have to change the state *before* sending the last packet as + * rxrpc might give us the reply before it returns from sending the + * request. Further, if the send fails, we may already have been given + * a notification and may have collected it. + */ if (!call->send_pages) call->state = AFS_CALL_AWAIT_REPLY; ret = rxrpc_kernel_send_data(afs_socket, rxcall, @@ -389,7 +393,17 @@ int afs_make_call(struct in_addr *addr, return wait_mode->wait(call); error_do_abort: - rxrpc_kernel_abort_call(afs_socket, rxcall, RX_USER_ABORT, -ret, "KSD"); + call->state = AFS_CALL_COMPLETE; + if (ret != -ECONNABORTED) { + rxrpc_kernel_abort_call(afs_socket, rxcall, RX_USER_ABORT, + -ret, "KSD"); + } else { + abort_code = 0; + offset = 0; + rxrpc_kernel_recv_data(afs_socket, rxcall, NULL, 0, &offset, + false, &abort_code); + ret = call->type->abort_to_error(abort_code); + } error_kill_call: afs_end_call(call); _leave(" = %d", ret); @@ -434,16 +448,18 @@ static void afs_deliver_to_call(struct a case -EINPROGRESS: case -EAGAIN: goto out; + case -ECONNABORTED: + goto call_complete; case -ENOTCONN: abort_code = RX_CALL_DEAD; rxrpc_kernel_abort_call(afs_socket, call->rxcall, abort_code, -ret, "KNC"); - goto do_abort; + goto save_error; case -ENOTSUPP: abort_code = RXGEN_OPCODE; rxrpc_kernel_abort_call(afs_socket, call->rxcall, abort_code, -ret, "KIV"); - goto do_abort; + goto save_error; case -ENODATA: case -EBADMSG: case -EMSGSIZE: @@ -453,7 +469,7 @@ static void afs_deliver_to_call(struct a abort_code = RXGEN_SS_UNMARSHAL; rxrpc_kernel_abort_call(afs_socket, call->rxcall, abort_code, EBADMSG, "KUM"); - goto do_abort; + goto save_error; } } @@ -464,8 +480,9 @@ out: _leave(""); return; -do_abort: +save_error: call->error = ret; +call_complete: call->state = AFS_CALL_COMPLETE; goto done; } @@ -513,6 +530,8 @@ static int afs_wait_for_call_to_complete _debug("call incomplete"); rxrpc_kernel_abort_call(afs_socket, call->rxcall, RX_CALL_DEAD, -ret, abort_why); + } else if (call->error < 0) { + ret = call->error; } _debug("call complete"); Patches currently in stable-queue which might be from dhowells(a)redhat.com are queue-4.9/afs-flush-outstanding-writes-when-an-fd-is-closed.patch queue-4.9/afs-fix-the-maths-in-afs_fs_store_data.patch queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-prevent-callback-expiry-timer-overflow.patch queue-4.9/crypto-rsa-fix-buffer-overread-when-stripping-leading-zeroes.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/rxrpc-wake-up-the-transmitter-if-rx-window-size-increases-on-the-peer.patch queue-4.9/afs-invalid-op-id-should-abort-with-rxgen_opcode.patch queue-4.9/afs-fix-page-leak-in-afs_write_begin.patch queue-4.9/afs-better-abort-and-net-error-handling.patch queue-4.9/afs-fix-missing-put_page.patch queue-4.9/afs-migrate-vlocation-fields-to-64-bit.patch queue-4.9/rxrpc-ignore-busy-packets-on-old-calls.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-fix-afs_kill_pages.patch queue-4.9/afs-fix-abort-on-signal-while-waiting-for-call-completion.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "afs: Adjust mode bits processing" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled afs: Adjust mode bits processing to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: afs-adjust-mode-bits-processing.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 14:12:34 CET 2017 From: Marc Dionne <marc.dionne(a)auristor.com> Date: Thu, 16 Mar 2017 16:27:44 +0000 Subject: afs: Adjust mode bits processing From: Marc Dionne <marc.dionne(a)auristor.com> [ Upstream commit 627f46943ff90bcc32ddeb675d881c043c6fa2ae ] Mode bits for an afs file should not be enforced in the usual way. For files, the absence of user bits can restrict file access with respect to what is granted by the server. These bits apply regardless of the owner or the current uid; the rest of the mode bits (group, other) are ignored. Signed-off-by: Marc Dionne <marc.dionne(a)auristor.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/afs/security.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/fs/afs/security.c +++ b/fs/afs/security.c @@ -340,17 +340,22 @@ int afs_permission(struct inode *inode, } else { if (!(access & AFS_ACE_LOOKUP)) goto permission_denied; + if ((mask & MAY_EXEC) && !(inode->i_mode & S_IXUSR)) + goto permission_denied; if (mask & (MAY_EXEC | MAY_READ)) { if (!(access & AFS_ACE_READ)) goto permission_denied; + if (!(inode->i_mode & S_IRUSR)) + goto permission_denied; } else if (mask & MAY_WRITE) { if (!(access & AFS_ACE_WRITE)) goto permission_denied; + if (!(inode->i_mode & S_IWUSR)) + goto permission_denied; } } key_put(key); - ret = generic_permission(inode, mask); _leave(" = %d", ret); return ret; Patches currently in stable-queue which might be from marc.dionne(a)auristor.com are queue-4.9/afs-populate-group-id-from-vnode-status.patch queue-4.9/afs-adjust-mode-bits-processing.patch queue-4.9/afs-populate-and-use-client-modification-time.patch queue-4.9/afs-deal-with-an-empty-callback-array.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 4.14

by alexander.levin＠verizon.com

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 4.14 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 51a2a68fde2035887c0d74aee1c9569c691dfd61: Linux 4.14.4 (2017-12-05 11:26:38 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.14-14122017 for you to fetch changes up to 439d41e248c2514299ac7e95a43d3072ac9b14ad: x86/intel_rdt: Fix potential deadlock during resctrl unmount (2017-12-14 10:22:24 -0500) - ---------------------------------------------------------------- for-greg-4.14-14122017 - ---------------------------------------------------------------- Adam Sampson (1): media: usbtv: fix brightness and contrast controls Adriana Reus (1): clk: imx: imx7d: Fix parent clock for OCRAM_CLK Alex Vesker (1): IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop Alex Williamson (1): PCI: Detach driver before procfs & sysfs teardown on device remove Alexander Duyck (1): macvlan: Only deliver one copy of the frame to the macvlan interface Alexey Khoroshilov (1): mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() Anand Jain (2): btrfs: fix false EIO for missing device btrfs: undo writable superblocke when sprouting fails Arnd Bergmann (1): scsi: aacraid: use timespec64 instead of timeval Artur Paszkiewicz (1): raid5-ppl: check recovery_offset when performing ppl recovery Arun Kumar Neelakantam (1): rpmsg: glink: Initialize the "intent_req_comp" completion variable Bart Van Assche (4): target/iscsi: Detect conn_cmd_list corruption early target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() IB/core: Fix endianness annotation in rdma_is_multicast_addr() RDMA/cma: Avoid triggering undefined behavior Bartosz Chronowski (1): Bluetooth: btusb: Add new NFA344A entry. Bob Peterson (1): GFS2: Take inode off order_write list when setting jdata flag Breno Leitao (1): powerpc/xmon: Check before calling xive functions Brian Foster (1): xfs: fix log block underflow during recovery cycle verification Brian Norris (2): ath10k: fix core PCI suspend when WoWLAN is supported but disabled ath10k: fix build errors with !CONFIG_PM Chen Zhong (1): clk: mediatek: add the option for determining PLL source clock Christoph Hellwig (2): nvme: use kref_get_unless_zero in nvme_find_get_ns xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real Christophe JAILLET (3): video: fbdev: au1200fb: Release some resources if a memory allocation fails video: fbdev: au1200fb: Return an error code if a memory allocation fails btrfs: tests: Fix a memory leak in error handling path in 'run_test()' Christophe Leroy (1): powerpc/ipic: Fix status get and status clear Chuck Lever (1): xprtrdma: Don't defer fencing an async RPC's chunks Colin Ian King (2): btrfs: avoid null pointer dereference on fs_info when calling btrfs_crit ipmi_si: fix memory leak on new_smi Dan Carpenter (2): misc: pci_endpoint_test: Avoid triggering a BUG() scsi: bfa: integer overflow in debugfs Daniel Lezcano (1): thermal/drivers/step_wise: Fix temperature regulation misbehavior Darrick J. Wong (1): xfs: return a distinct error code value for IGET_INCORE cache misses Don Hiatt (1): IB/hfi1: Mask out A bit from psn trace Douglas Gilbert (1): scsi: scsi_debug: write_same: fix error report Egil Hjelmeland (1): net: dsa: lan9303: Do not disable switch fabric port 0 at .probe Eric Dumazet (1): ipv4: ipv4_default_advmss() should use route mtu Eryu Guan (1): xfs: truncate pagecache before writeback in xfs_setattr_size() Felix Manlunas (1): liquidio: fix kernel panic in VF driver Fuyun Liang (1): net: hns3: fix for getting advertised_caps in hns3_get_link_ksettings Gao Feng (1): ppp: Destroy the mutex when cleanup Gary R Hook (1): iommu/amd: Limit the IOVA page range to the specified addresses Geert Uytterhoeven (2): fbdev: controlfb: Add missing modes to fix out of bounds access mtd: spi-nor: stm32-quadspi: Fix uninitialized error return code Guoqing Jiang (1): md-cluster: fix wrong condition check in raid1_write_request Gustavo A. R. Silva (1): thunderbolt: tb: fix use after free in tb_activate_pcie_devices Guy Levi (1): IB/mlx4: Fix RSS's QPC attributes assignments Hans Holmberg (1): lightnvm: pblk: prevent gc kicks when gc is not operational Hans de Goede (1): staging: rtl8188eu: Revert part of "staging: rtl8188eu: fix comments with lines over 80 characters" Hiroyuki Yokoyama (1): dmaengine: rcar-dmac: use TCRB instead of TCR for residue Jan Kara (2): mm: Handle 0 flags in _calc_vm_trans() macro udf: Avoid overflow when session starts at large offset Javier GonzÃ¡lez (3): lightnvm: pblk: use right flag for GC allocation lightnvm: pblk: initialize debug stat counter lightnvm: pblk: fix min size for page mempool Jia-Ju Bai (3): vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd Jiang Yi (1): target/file: Do not return error for UNMAP if length is zero Jiri Slaby (1): l2tp: cleanup l2tp_tunnel_delete calls Johan Hovold (1): serdev: ttyport: enforce tty-driver open() requirement KUWAZAWA Takuya (1): netfilter: ipvs: Fix inappropriate output of procfs Kishon Vijay Abraham I (1): misc: pci_endpoint_test: Fix failure path return values in probe Kuninori Morimoto (1): ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod Kuppuswamy Sathyanarayanan (1): platform/x86: intel_punit_ipc: Fix resource ioremap warning Kurt Garloff (1): scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry Ladislav Michl (1): video: udlfb: Fix read EDID timeout Leo Yan (1): clk: hi6220: mark clock cs_atb_syspll as critical Leon Romanovsky (1): RDMA/cxgb4: Declare stag as __be32 Liang Chen (1): bcache: explicitly destroy mutex while exiting Linus Walleij (1): pinctrl: adi2: Fix Kconfig build problem Lipeng (6): net: hns3: fix a bug in hclge_uninit_client_instance net: hns3: add nic_client check when initialize roce base information net: hns3: fix the bug of hns3_set_txbd_baseinfo net: hns3: fix the TX/RX ring.queue_index in hns3_ring_get_cfg net: hns3: fix the bug when map buffer fail net: hns3: fix a bug when alloc new buffer Liu Bo (1): badblocks: fix wrong return value in badblocks_set if badblocks are disabled Markus Elfring (1): platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() Martin Wilck (2): scsi: hpsa: cleanup sas_phy structures in sysfs when unloading scsi: hpsa: destroy sas transport properties before scsi_host Matteo Croce (1): icmp: don't fail on fragment reassembly time exceeded Matthias Brugger (2): iommu/mediatek: Fix driver name soc: mediatek: pwrap: fix compiler errors Mauro Carvalho Chehab (1): media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() Miaoqing Pan (1): ath9k: fix tx99 potential info leak Michael Ellerman (1): powerpc/perf/hv-24x7: Fix incorrect comparison in memord MichaÅ‚ MirosÅ‚aw (1): clk: tegra: Fix cclk_lp divisor register Mika Westerberg (1): PCI: Do not allocate more buses than available in parent Ming Lei (1): blk-mq-sched: dispatch from scheduler IFF progress is made in ->dispatch Neil Armstrong (1): ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply NeilBrown (1): raid5: Set R5_Expanded on parity devices as well as data. Nick Desaulniers (1): arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27 Nicolin Chen (1): clk: tegra: Use readl_relaxed_poll_timeout_atomic() in tegra210_clock_init() Nikolay Borisov (1): btrfs: Explicitly handle btrfs_update_root failure Osama Khan (1): platform/x86: hp_accel: Add quirk for HP ProBook 440 G4 Pankaj Bharadiya (1): ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case Parav Pandit (2): IB/core: Fix use workqueue without WQ_MEM_RECLAIM IB/core: Fix calculation of maximum RoCE MTU Patel Jay P (1): Ib/hfi1: Return actual operational VLs in port info query Peter Ujfalusi (1): dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type Philipp Zabel (1): rtc: pcf8563: fix output clock rate Pixel Ding (1): drm/amdgpu: bypass lru touch for KIQ ring submission Qiang (1): PCI/PME: Handle invalid data when reading Root Status Rajat Jain (1): PM / s2idle: Clear the events_check_enabled flag Rakesh Pandit (2): lightnvm: pblk: fix changing GC group list for a line lightnvm: pblk: protect line bitmap while submitting meta io Reinette Chatre (1): x86/intel_rdt: Fix potential deadlock during resctrl unmount Robert Baronescu (1): crypto: tcrypt - fix buffer lengths in test_aead_speed() Robert Stonehouse (1): sfc: don't warn on successful change of MAC Ronald TschalÃ¤r (1): Bluetooth: hci_ldisc: Fix another race when closing the tty. Ross Zwisler (1): dev/dax: fix uninitialized variable build warning Sergey Matyukevich (1): qtnfmac: modify full Tx queue error reporting Shriya (1): powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo Suzuki K Poulose (1): arm-ccn: perf: Prevent module unload while PMU is in use SÃ©bastien Szymanski (2): HID: cp2112: fix broken gpio_direction_input callback clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU Tushar Dave (1): samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp1 Tyrel Datwyler (1): powerpc/pseries/vio: Dispose of virq mapping on vdevice unregister Wanpeng Li (1): KVM: nVMX: Fix EPT switching advertising Wei Yongjun (2): mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create() nullb: fix error return code in null_init() William A. Kennington III (1): powerpc/opal: Fix EBUSY bug in acquiring tokens Xiaofei Tan (1): scsi: hisi_sas: fix the risk of freeing slot twice nixiaoming (1): tty fix oops when rmmod 8250 qumingguang (1): net: hns3: Fix a misuse to devm_free_irq tang.junhui (1): bcache: fix wrong cache_misses statistics tangwenji (2): iscsi-target: fix memory leak in lio_target_tiqn_addtpg() target:fix condition return in core_pr_dump_initiator_port() weiping zhang (2): scsi: sd: change manage_start_stop to bool in sysfs interface scsi: sd: change allow_restart to bool in sysfs interface arch/arm64/Makefile | 8 +++-- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 + arch/blackfin/Kconfig | 7 +++-- arch/blackfin/Kconfig.debug | 1 + arch/powerpc/perf/hv-24x7.c | 2 +- arch/powerpc/platforms/powernv/opal-async.c | 6 ++-- arch/powerpc/platforms/powernv/setup.c | 2 +- arch/powerpc/platforms/pseries/vio.c | 2 ++ arch/powerpc/sysdev/ipic.c | 4 +-- arch/powerpc/xmon/xmon.c | 5 +++ arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 10 +++--- arch/x86/kvm/vmx.c | 5 +-- block/badblocks.c | 2 +- block/blk-mq-sched.c | 12 ++++---- crypto/tcrypt.c | 6 ++-- drivers/block/null_blk.c | 4 ++- drivers/bluetooth/btusb.c | 1 + drivers/bluetooth/hci_ldisc.c | 4 +-- drivers/bus/arm-ccn.c | 1 + drivers/char/ipmi/ipmi_si_intf.c | 1 + drivers/clk/hisilicon/clk-hi6220.c | 2 +- drivers/clk/imx/clk-imx6q.c | 2 +- drivers/clk/imx/clk-imx7d.c | 2 +- drivers/clk/mediatek/clk-mtk.h | 1 + drivers/clk/mediatek/clk-pll.c | 5 ++- drivers/clk/tegra/clk-tegra210.c | 4 +-- drivers/clk/tegra/clk-tegra30.c | 2 +- drivers/dax/device.c | 3 +- drivers/dma/sh/rcar-dmac.c | 2 +- drivers/dma/ti-dma-crossbar.c | 8 ++--- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 3 +- drivers/hid/hid-cp2112.c | 8 +++-- drivers/infiniband/core/addr.c | 2 +- drivers/infiniband/core/cma.c | 11 ++++--- drivers/infiniband/hw/cxgb4/t4.h | 2 +- drivers/infiniband/hw/hfi1/chip.c | 2 +- drivers/infiniband/hw/hfi1/trace.c | 4 +-- drivers/infiniband/hw/mlx4/qp.c | 16 +++++----- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 ++++- drivers/iommu/amd_iommu.c | 2 +- drivers/iommu/mtk_iommu_v1.c | 2 +- drivers/lightnvm/pblk-core.c | 8 +++-- drivers/lightnvm/pblk-gc.c | 9 +++--- drivers/lightnvm/pblk-init.c | 21 +++++++------ drivers/lightnvm/pblk-read.c | 9 ++++-- drivers/lightnvm/pblk.h | 2 +- drivers/md/bcache/request.c | 6 +++- drivers/md/bcache/super.c | 6 ++-- drivers/md/raid1.c | 10 +++--- drivers/md/raid5-ppl.c | 3 +- drivers/md/raid5.c | 5 ++- drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 3 ++ drivers/media/usb/usbtv/usbtv-video.c | 4 +-- drivers/mfd/mxs-lradc.c | 6 ++-- drivers/misc/pci_endpoint_test.c | 4 +++ drivers/mtd/spi-nor/stm32-quadspi.c | 4 +-- drivers/net/dsa/lan9303-core.c | 2 +- drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 6 ++-- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 12 ++++++-- .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 15 +++++---- .../ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 3 ++ drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 + drivers/net/ethernet/sfc/ef10.c | 2 +- drivers/net/macvlan.c | 2 +- drivers/net/ppp/ppp_generic.c | 1 + drivers/net/wireless/ath/ath10k/pci.c | 29 +++++++++-------- drivers/net/wireless/ath/ath9k/tx99.c | 5 +++ .../net/wireless/quantenna/qtnfmac/pearl/pcie.c | 2 +- drivers/nvme/host/core.c | 3 +- drivers/pci/pcie/pme.c | 5 ++- drivers/pci/probe.c | 7 ++++- drivers/pci/remove.c | 2 +- drivers/pinctrl/Kconfig | 3 +- drivers/platform/x86/hp_accel.c | 1 + drivers/platform/x86/intel_punit_ipc.c | 8 ++--- drivers/platform/x86/sony-laptop.c | 14 +++++---- drivers/rpmsg/qcom_glink_native.c | 1 + drivers/rtc/rtc-pcf8563.c | 2 +- drivers/scsi/aacraid/commsup.c | 26 ++++++++-------- drivers/scsi/bfa/bfad_debugfs.c | 5 +-- drivers/scsi/hisi_sas/hisi_sas_main.c | 9 ++++-- drivers/scsi/hpsa.c | 6 ++-- drivers/scsi/scsi_debug.c | 6 ++-- drivers/scsi/scsi_devinfo.c | 2 +- drivers/scsi/sd.c | 12 ++++++-- drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +- drivers/staging/rtl8188eu/core/rtw_ap.c | 2 +- drivers/staging/rtl8188eu/core/rtw_cmd.c | 4 +-- drivers/staging/vt6655/device_main.c | 3 +- drivers/target/iscsi/iscsi_target.c | 3 +- drivers/target/iscsi/iscsi_target_configfs.c | 3 +- drivers/target/iscsi/iscsi_target_util.c | 4 +++ drivers/target/target_core_file.c | 4 +++ drivers/target/target_core_pr.c | 4 ++- drivers/thermal/step_wise.c | 11 ++++--- drivers/thunderbolt/tb.c | 1 + drivers/tty/serdev/serdev-ttyport.c | 14 ++++++--- drivers/video/fbdev/au1200fb.c | 7 +++-- drivers/video/fbdev/controlfb.h | 2 ++ drivers/video/fbdev/udlfb.c | 10 +++--- fs/btrfs/ioctl.c | 7 ++++- fs/btrfs/super.c | 4 +-- fs/btrfs/tests/free-space-tree-tests.c | 3 +- fs/btrfs/volumes.c | 7 ++++- fs/gfs2/file.c | 4 ++- fs/proc/proc_tty.c | 3 +- fs/udf/super.c | 2 +- fs/xfs/libxfs/xfs_bmap.c | 2 +- fs/xfs/xfs_icache.c | 2 +- fs/xfs/xfs_iops.c | 36 ++++++++++++---------- fs/xfs/xfs_log_recover.c | 2 +- include/linux/mman.h | 3 +- include/rdma/ib_addr.h | 11 ++++--- include/rdma/ib_pack.h | 19 +++++++----- kernel/power/suspend.c | 2 +- net/ipv4/icmp.c | 15 +++++++-- net/ipv4/route.c | 2 +- net/l2tp/l2tp_core.c | 2 +- net/l2tp/l2tp_netlink.c | 2 +- net/netfilter/ipvs/ip_vs_ctl.c | 4 +++ net/sunrpc/xprtrdma/transport.c | 2 +- samples/bpf/xdp1_user.c | 8 +++++ sound/soc/intel/skylake/skl-sst-utils.c | 15 ++++++--- sound/soc/sh/rcar/ssi.c | 11 +++++-- 124 files changed, 451 insertions(+), 257 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaMqMbAAoJEN6mb/eXdyzcc7EP/2qrNQ4olHsqnUiMqIwO7oYa KUBXgoMV7qtJPXOp206B7M37FxxXtp3gfQYZf2LT8AMSGYL2a5d1pIi0voV94n2d 6RcXzJLihbeEg9IR3xwxltX2Xex4TeO5g1BoQQVakg7wE5TUDU9w2kX7qwUn+ewx Vxuz88DUF6J4C2PtpXoA0pc7LeolDjYc4Ugwz2O9DzhzsSc0cQ8XGFqokaWY/xMM 3wdKnVtIV6UtSI3XqBqGYJVDIXnVGCH8GTt/4HU/m5OXiz+2pLWmD36zL/WZaFIY ikxIvN/UkBn6W08AHXVjMaMryOFGYh++3UQmbCBlUSIQJkwJhdGi28wzouAa4RNt My5TyFMcdnPQCDfF5/1t2n/9CDLVFO1ckliOugkb8PJkj58BdXB4Gk7uIV34Y6vl mm7964MSs/BBJyfGn8RTRRbSFXbJvOH9yaftECX1ZFmrjfQ8UhNVBGc0AX3WouKj aeukJaxtJKWDRWN2XbCv7BSUBb6E8FckNgB9k/fuFWJOvIhY523fmCipGJrx2CW0 HSHF2XGio2w3XWzkaAjjV8ak3yWuQRp3yV+jgAfekhHK2XlBTCEC9JIfDkXS7g5z vRDGGCrAWfSk/AwZOEwAjCsvTggLOD7+WPcTp5/PeqBm9GD2soVB3u7M8DEUYnsq BZzwfU8QKuB78Daa1ZZj =ZnEU -----END PGP SIGNATURE-----

7 years, 6 months

2
1
0 0

[Linux-stable-mirror] Patch "xprtrdma: Don't defer fencing an async RPC's chunks" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xprtrdma: Don't defer fencing an async RPC's chunks to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xprtrdma-don-t-defer-fencing-an-async-rpc-s-chunks.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Chuck Lever <chuck.lever(a)oracle.com> Date: Mon, 9 Oct 2017 12:03:26 -0400 Subject: xprtrdma: Don't defer fencing an async RPC's chunks From: Chuck Lever <chuck.lever(a)oracle.com> [ Upstream commit 8f66b1a529047a972cb9602a919c53a95f3d7a2b ] In current kernels, waiting in xprt_release appears to be safe to do. I had erroneously believed that for ASYNC RPCs, waiting of any kind in xprt_release->xprt_rdma_free would result in deadlock. I've done injection testing and consulted with Trond to confirm that waiting in the RPC release path is safe. For the very few times where RPC resources haven't yet been released earlier by the reply handler, it is safe to wait synchronously in xprt_rdma_free for invalidation rather than defering it to MR recovery. Note: When the QP is error state, posting a LocalInvalidate should flush and mark the MR as bad. There is no way the remote HCA can access that MR via a QP in error state, so it is effectively already inaccessible and thus safe for the Upper Layer to access. The next time the MR is used it should be recognized and cleaned up properly by frwr_op_map. Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sunrpc/xprtrdma/transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/sunrpc/xprtrdma/transport.c +++ b/net/sunrpc/xprtrdma/transport.c @@ -686,7 +686,7 @@ xprt_rdma_free(struct rpc_task *task) dprintk("RPC: %s: called on 0x%p\n", __func__, req->rl_reply); if (!list_empty(&req->rl_registered)) - ia->ri_ops->ro_unmap_safe(r_xprt, req, !RPC_IS_ASYNC(task)); + ia->ri_ops->ro_unmap_sync(r_xprt, &req->rl_registered); rpcrdma_unmap_sges(ia, req); rpcrdma_buffer_put(req); } Patches currently in stable-queue which might be from chuck.lever(a)oracle.com are queue-4.14/xprtrdma-don-t-defer-fencing-an-async-rpc-s-chunks.patch queue-4.14/sunrpc-fix-a-race-in-the-receive-code-path.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "xfs: truncate pagecache before writeback in xfs_setattr_size()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfs: truncate pagecache before writeback in xfs_setattr_size() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfs-truncate-pagecache-before-writeback-in-xfs_setattr_size.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Eryu Guan <eguan(a)redhat.com> Date: Wed, 1 Nov 2017 21:43:50 -0700 Subject: xfs: truncate pagecache before writeback in xfs_setattr_size() From: Eryu Guan <eguan(a)redhat.com> [ Upstream commit 350976ae21873b0d36584ea005076356431b8f79 ] On truncate down, if new size is not block size aligned, we zero the rest of block to avoid exposing stale data to user, and iomap_truncate_page() skips zeroing if the range is already in unwritten state or a hole. Then we writeback from on-disk i_size to the new size if this range hasn't been written to disk yet, and truncate page cache beyond new EOF and set in-core i_size. The problem is that we could write data between di_size and newsize before removing the page cache beyond newsize, as the extents may still be in unwritten state right after a buffer write. As such, the page of data that newsize lies in has not been zeroed by page cache invalidation before it is written, and xfs_do_writepage() hasn't triggered it's "zero data beyond EOF" case because we haven't updated in-core i_size yet. Then a subsequent mmap read could see non-zeros past EOF. I occasionally see this in fsx runs in fstests generic/112, a simplified fsx operation sequence is like (assuming 4k block size xfs): fallocate 0x0 0x1000 0x0 keep_size write 0x0 0x1000 0x0 truncate 0x0 0x800 0x1000 punch_hole 0x0 0x800 0x800 mapread 0x0 0x800 0x800 where fallocate allocates unwritten extent but doesn't update i_size, buffer write populates the page cache and extent is still unwritten, truncate skips zeroing page past new EOF and writes the page to disk, punch_hole invalidates the page cache, at last mapread reads the block back and sees non-zero beyond EOF. Fix it by moving truncate_setsize() to before writeback so the page cache invalidation zeros the partial page at the new EOF. This also triggers "zero data beyond EOF" in xfs_do_writepage() at writeback time, because newsize has been set and page straddles the newsize. Also fixed the wrong 'end' param of filemap_write_and_wait_range() call while we're at it, the 'end' is inclusive and should be 'newsize - 1'. Suggested-by: Dave Chinner <dchinner(a)redhat.com> Signed-off-by: Eryu Guan <eguan(a)redhat.com> Acked-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Brian Foster <bfoster(a)redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/xfs/xfs_iops.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -886,22 +886,6 @@ xfs_setattr_size( return error; /* - * We are going to log the inode size change in this transaction so - * any previous writes that are beyond the on disk EOF and the new - * EOF that have not been written out need to be written here. If we - * do not write the data out, we expose ourselves to the null files - * problem. Note that this includes any block zeroing we did above; - * otherwise those blocks may not be zeroed after a crash. - */ - if (did_zeroing || - (newsize > ip->i_d.di_size && oldsize != ip->i_d.di_size)) { - error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, - ip->i_d.di_size, newsize); - if (error) - return error; - } - - /* * We've already locked out new page faults, so now we can safely remove * pages from the page cache knowing they won't get refaulted until we * drop the XFS_MMAP_EXCL lock after the extent manipulations are @@ -917,9 +901,29 @@ xfs_setattr_size( * user visible changes). There's not much we can do about this, except * to hope that the caller sees ENOMEM and retries the truncate * operation. + * + * And we update in-core i_size and truncate page cache beyond newsize + * before writeback the [di_size, newsize] range, so we're guaranteed + * not to write stale data past the new EOF on truncate down. */ truncate_setsize(inode, newsize); + /* + * We are going to log the inode size change in this transaction so + * any previous writes that are beyond the on disk EOF and the new + * EOF that have not been written out need to be written here. If we + * do not write the data out, we expose ourselves to the null files + * problem. Note that this includes any block zeroing we did above; + * otherwise those blocks may not be zeroed after a crash. + */ + if (did_zeroing || + (newsize > ip->i_d.di_size && oldsize != ip->i_d.di_size)) { + error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, + ip->i_d.di_size, newsize - 1); + if (error) + return error; + } + error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0, &tp); if (error) return error; Patches currently in stable-queue which might be from eguan(a)redhat.com are queue-4.14/ext4-fix-fdatasync-2-after-fallocate-2-operation.patch queue-4.14/xfs-truncate-pagecache-before-writeback-in-xfs_setattr_size.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "xfs: return a distinct error code value for IGET_INCORE cache misses" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfs: return a distinct error code value for IGET_INCORE cache misses to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfs-return-a-distinct-error-code-value-for-iget_incore-cache-misses.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: "Darrick J. Wong" <darrick.wong(a)oracle.com> Date: Tue, 17 Oct 2017 21:37:32 -0700 Subject: xfs: return a distinct error code value for IGET_INCORE cache misses From: "Darrick J. Wong" <darrick.wong(a)oracle.com> [ Upstream commit ed438b476b611c67089760037139f93ea8ed41d5 ] For an XFS_IGET_INCORE iget operation, if the inode isn't in the cache, return ENODATA so that we don't confuse it with the pre-existing ENOENT cases (inode is in cache, but freed). Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Reviewed-by: Brian Foster <bfoster(a)redhat.com> Reviewed-by: Dave Chinner <dchinner(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/xfs/xfs_icache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/xfs/xfs_icache.c +++ b/fs/xfs/xfs_icache.c @@ -610,7 +610,7 @@ again: } else { rcu_read_unlock(); if (flags & XFS_IGET_INCORE) { - error = -ENOENT; + error = -ENODATA; goto out_error_or_again; } XFS_STATS_INC(mp, xs_ig_missed); Patches currently in stable-queue which might be from darrick.wong(a)oracle.com are queue-4.14/xfs-fix-incorrect-extent-state-in-xfs_bmap_add_extent_unwritten_real.patch queue-4.14/xfs-fix-log-block-underflow-during-recovery-cycle-verification.patch queue-4.14/xfs-truncate-pagecache-before-writeback-in-xfs_setattr_size.patch queue-4.14/xfs-return-a-distinct-error-code-value-for-iget_incore-cache-misses.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "xfs: fix log block underflow during recovery cycle verification" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfs: fix log block underflow during recovery cycle verification to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfs-fix-log-block-underflow-during-recovery-cycle-verification.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Brian Foster <bfoster(a)redhat.com> Date: Thu, 26 Oct 2017 09:31:16 -0700 Subject: xfs: fix log block underflow during recovery cycle verification From: Brian Foster <bfoster(a)redhat.com> [ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ] It is possible for mkfs to format very small filesystems with too small of an internal log with respect to the various minimum size and block count requirements. If this occurs when the log happens to be smaller than the scan window used for cycle verification and the scan wraps the end of the log, the start_blk calculation in xlog_find_head() underflows and leads to an attempt to scan an invalid range of log blocks. This results in log recovery failure and a failed mount. Since there may be filesystems out in the wild with this kind of geometry, we cannot simply refuse to mount. Instead, cap the scan window for cycle verification to the size of the physical log. This ensures that the cycle verification proceeds as expected when the scan wraps the end of the log. Reported-by: Zorro Lang <zlang(a)redhat.com> Signed-off-by: Brian Foster <bfoster(a)redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/xfs/xfs_log_recover.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -753,7 +753,7 @@ xlog_find_head( * in the in-core log. The following number can be made tighter if * we actually look at the block size of the filesystem. */ - num_scan_bblks = XLOG_TOTAL_REC_SHIFT(log); + num_scan_bblks = min_t(int, log_bbnum, XLOG_TOTAL_REC_SHIFT(log)); if (head_blk >= num_scan_bblks) { /* * We are guaranteed that the entire check can be performed Patches currently in stable-queue which might be from bfoster(a)redhat.com are queue-4.14/xfs-fix-incorrect-extent-state-in-xfs_bmap_add_extent_unwritten_real.patch queue-4.14/xfs-fix-log-block-underflow-during-recovery-cycle-verification.patch queue-4.14/xfs-truncate-pagecache-before-writeback-in-xfs_setattr_size.patch queue-4.14/xfs-return-a-distinct-error-code-value-for-iget_incore-cache-misses.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfs-fix-incorrect-extent-state-in-xfs_bmap_add_extent_unwritten_real.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Christoph Hellwig <hch(a)lst.de> Date: Tue, 17 Oct 2017 14:16:19 -0700 Subject: xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real From: Christoph Hellwig <hch(a)lst.de> [ Upstream commit 5e422f5e4fd71d18bc6b851eeb3864477b3d842e ] There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the passed in new extent state but always converted to normal, leading to wrong behavior when converting from normal to unwritten. Only found by code inspection, it seems like this code path to move partial extent from written to unwritten while merging it with the next extent is rarely exercised. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Brian Foster <bfoster(a)redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/xfs/libxfs/xfs_bmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -2560,7 +2560,7 @@ xfs_bmap_add_extent_unwritten_real( &i))) goto done; XFS_WANT_CORRUPTED_GOTO(mp, i == 0, done); - cur->bc_rec.b.br_state = XFS_EXT_NORM; + cur->bc_rec.b.br_state = new->br_state; if ((error = xfs_btree_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(mp, i == 1, done); Patches currently in stable-queue which might be from hch(a)lst.de are queue-4.14/xfs-fix-incorrect-extent-state-in-xfs_bmap_add_extent_unwritten_real.patch queue-4.14/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.14/target-iscsi-detect-conn_cmd_list-corruption-early.patch queue-4.14/target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch queue-4.14/scsi-core-fix-a-scsi_show_rq-null-pointer-dereference.patch queue-4.14/scsi-libsas-fix-length-error-in-sas_smp_handler.patch queue-4.14/blk-mq-sched-dispatch-from-scheduler-iff-progress-is-made-in-dispatch.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vt6655-fix-a-possible-sleep-in-atomic-bug-in-vt6655_suspend.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Mon, 9 Oct 2017 16:45:55 +0800 Subject: vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 42c8eb3f6e15367981b274cb79ee4657e2c6949d ] The driver may sleep under a spinlock, and the function call path is: vt6655_suspend (acquire the spinlock) pci_set_power_state __pci_start_power_transition (drivers/pci/pci.c) msleep --> may sleep To fix it, pci_set_power_state is called without having a spinlock. This bug is found by my static analysis tool and my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/vt6655/device_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1693,10 +1693,11 @@ static int vt6655_suspend(struct pci_dev MACbShutdown(priv); pci_disable_device(pcid); - pci_set_power_state(pcid, pci_choose_state(pcid, state)); spin_unlock_irqrestore(&priv->lock, flags); + pci_set_power_state(pcid, pci_choose_state(pcid, state)); + return 0; } Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.14/rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_createbss_cmd.patch queue-4.14/rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_disassoc_cmd.patch queue-4.14/vt6655-fix-a-possible-sleep-in-atomic-bug-in-vt6655_suspend.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "video: udlfb: Fix read EDID timeout" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: udlfb: Fix read EDID timeout to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-udlfb-fix-read-edid-timeout.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Ladislav Michl <ladis(a)linux-mips.org> Date: Thu, 9 Nov 2017 18:09:30 +0100 Subject: video: udlfb: Fix read EDID timeout From: Ladislav Michl <ladis(a)linux-mips.org> [ Upstream commit c98769475575c8a585f5b3952f4b5f90266f699b ] While usb_control_msg function expects timeout in miliseconds, a value of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error message which looks like: udlfb: Read EDID byte 78 failed err ffffff92 as error is either negative errno or number of bytes transferred use %d format specifier. Returned EDID is in second byte, so return error when less than two bytes are received. Fixes: 18dffdf8913a ("staging: udlfb: enhance EDID and mode handling support") Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> Cc: Bernie Thompson <bernie(a)plugable.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/udlfb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -769,11 +769,11 @@ static int dlfb_get_edid(struct dlfb_dat for (i = 0; i < len; i++) { ret = usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), (0x02), - (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2, - HZ); - if (ret < 1) { - pr_err("Read EDID byte %d failed err %x\n", i, ret); + usb_rcvctrlpipe(dev->udev, 0), 0x02, + (0x80 | (0x02 << 5)), i << 8, 0xA1, + rbuf, 2, USB_CTRL_GET_TIMEOUT); + if (ret < 2) { + pr_err("Read EDID byte %d failed: %d\n", i, ret); i--; break; } Patches currently in stable-queue which might be from ladis(a)linux-mips.org are queue-4.14/video-udlfb-fix-read-edid-timeout.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "video: fbdev: au1200fb: Return an error code if a memory allocation fails" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: au1200fb: Return an error code if a memory allocation fails to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-au1200fb-return-an-error-code-if-a-memory-allocation-fails.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Thu, 9 Nov 2017 18:09:28 +0100 Subject: video: fbdev: au1200fb: Return an error code if a memory allocation fails From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 8cae353e6b01ac3f18097f631cdbceb5ff28c7f3 ] 'ret' is known to be 0 at this point. In case of memory allocation error in 'framebuffer_alloc()', return -ENOMEM instead. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Cc: Tejun Heo <tj(a)kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/au1200fb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/video/fbdev/au1200fb.c +++ b/drivers/video/fbdev/au1200fb.c @@ -1681,8 +1681,10 @@ static int au1200fb_drv_probe(struct pla fbi = framebuffer_alloc(sizeof(struct au1200fb_device), &dev->dev); - if (!fbi) + if (!fbi) { + ret = -ENOMEM; goto failed; + } _au1200fb_infos[plane] = fbi; fbdev = fbi->par; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.14/video-fbdev-au1200fb-release-some-resources-if-a-memory-allocation-fails.patch queue-4.14/video-fbdev-au1200fb-return-an-error-code-if-a-memory-allocation-fails.patch queue-4.14/btrfs-tests-fix-a-memory-leak-in-error-handling-path-in-run_test.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "video: fbdev: au1200fb: Release some resources if a memory allocation fails" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: au1200fb: Release some resources if a memory allocation fails to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-au1200fb-release-some-resources-if-a-memory-allocation-fails.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Thu, 9 Nov 2017 18:09:28 +0100 Subject: video: fbdev: au1200fb: Release some resources if a memory allocation fails From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 451f130602619a17c8883dd0b71b11624faffd51 ] We should go through the error handling code instead of returning -ENOMEM directly. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Cc: Tejun Heo <tj(a)kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/au1200fb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/video/fbdev/au1200fb.c +++ b/drivers/video/fbdev/au1200fb.c @@ -1701,7 +1701,8 @@ static int au1200fb_drv_probe(struct pla if (!fbdev->fb_mem) { print_err("fail to allocate frambuffer (size: %dK))", fbdev->fb_len / 1024); - return -ENOMEM; + ret = -ENOMEM; + goto failed; } /* Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.14/video-fbdev-au1200fb-release-some-resources-if-a-memory-allocation-fails.patch queue-4.14/video-fbdev-au1200fb-return-an-error-code-if-a-memory-allocation-fails.patch queue-4.14/btrfs-tests-fix-a-memory-leak-in-error-handling-path-in-run_test.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "udf: Avoid overflow when session starts at large offset" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled udf: Avoid overflow when session starts at large offset to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: udf-avoid-overflow-when-session-starts-at-large-offset.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Jan Kara <jack(a)suse.cz> Date: Mon, 16 Oct 2017 11:38:11 +0200 Subject: udf: Avoid overflow when session starts at large offset From: Jan Kara <jack(a)suse.cz> [ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ] When session starts beyond offset 2^31 the arithmetics in udf_check_vsd() would overflow. Make sure the computation is done in large enough type. Reported-by: Cezary Sliwa <sliwa(a)ifpan.edu.pl> Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/udf/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -703,7 +703,7 @@ static loff_t udf_check_vsd(struct super else sectorsize = sb->s_blocksize; - sector += (sbi->s_session << sb->s_blocksize_bits); + sector += (((loff_t)sbi->s_session) << sb->s_blocksize_bits); udf_debug("Starting at sector %u (%ld byte sectors)\n", (unsigned int)(sector >> sb->s_blocksize_bits), Patches currently in stable-queue which might be from jack(a)suse.cz are queue-4.14/mm-handle-0-flags-in-_calc_vm_trans-macro.patch queue-4.14/udf-avoid-overflow-when-session-starts-at-large-offset.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "tty fix oops when rmmod 8250" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tty fix oops when rmmod 8250 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tty-fix-oops-when-rmmod-8250.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: nixiaoming <nixiaoming(a)huawei.com> Date: Fri, 15 Sep 2017 17:45:56 +0800 Subject: tty fix oops when rmmod 8250 From: nixiaoming <nixiaoming(a)huawei.com> [ Upstream commit c79dde629d2027ca80329c62854a7635e623d527 ] After rmmod 8250.ko tty_kref_put starts kwork (release_one_tty) to release proc interface oops when accessing driver->driver_name in proc_tty_unregister_driver Use jprobe, found driver->driver_name point to 8250.ko static static struct uart_driver serial8250_reg .driver_name= serial, Use name in proc_dir_entry instead of driver->driver_name to fix oops test on linux 4.1.12: BUG: unable to handle kernel paging request at ffffffffa01979de IP: [<ffffffff81310f40>] strchr+0x0/0x30 PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ... ... [last unloaded: 8250] CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G O 4.1.12 #1 Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015 Workqueue: events release_one_tty task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000 RIP: 0010:[<ffffffff81310f40>] [<ffffffff81310f40>] strchr+0x0/0x30 RSP: 0018:ffff880852887c90 EFLAGS: 00010282 RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004 RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0 R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0 Stack: ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2 ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010 ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08 Call Trace: [<ffffffff812349b1>] ? __xlate_proc_name+0x71/0xd0 [<ffffffff812354f0>] remove_proc_entry+0x40/0x180 [<ffffffff815f6811>] ? _raw_spin_lock_irqsave+0x41/0x60 [<ffffffff813be520>] ? destruct_tty_driver+0x60/0xe0 [<ffffffff81237c68>] proc_tty_unregister_driver+0x28/0x40 [<ffffffff813be548>] destruct_tty_driver+0x88/0xe0 [<ffffffff813be5bd>] tty_driver_kref_put+0x1d/0x20 [<ffffffff813becca>] release_one_tty+0x5a/0xd0 [<ffffffff81074159>] process_one_work+0x139/0x420 [<ffffffff810745a1>] worker_thread+0x121/0x450 [<ffffffff81074480>] ? process_scheduled_works+0x40/0x40 [<ffffffff8107a16c>] kthread+0xec/0x110 [<ffffffff81080000>] ? tg_rt_schedulable+0x210/0x220 [<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80 [<ffffffff815f7292>] ret_from_fork+0x42/0x70 [<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80 Signed-off-by: nixiaoming <nixiaoming(a)huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/proc/proc_tty.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/fs/proc/proc_tty.c +++ b/fs/proc/proc_tty.c @@ -15,6 +15,7 @@ #include <linux/tty.h> #include <linux/seq_file.h> #include <linux/bitops.h> +#include "internal.h" /* * The /proc/tty directory inodes... @@ -165,7 +166,7 @@ void proc_tty_unregister_driver(struct t if (!ent) return; - remove_proc_entry(driver->driver_name, proc_tty_driver); + remove_proc_entry(ent->name, proc_tty_driver); driver->proc_entry = NULL; } Patches currently in stable-queue which might be from nixiaoming(a)huawei.com are queue-4.14/tty-fix-oops-when-rmmod-8250.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "thunderbolt: tb: fix use after free in tb_activate_pcie_devices" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled thunderbolt: tb: fix use after free in tb_activate_pcie_devices to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: thunderbolt-tb-fix-use-after-free-in-tb_activate_pcie_devices.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Sat, 4 Nov 2017 23:52:54 -0500 Subject: thunderbolt: tb: fix use after free in tb_activate_pcie_devices From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit a2e373438f72391493a4425efc1b82030b6b4fd5 ] Add a ̣̣continue statement in order to avoid using a previously free'd pointer tunnel in list_add. Addresses-Coverity-ID: 1415336 Fixes: 9d3cce0b6136 ("thunderbolt: Introduce thunderbolt bus and connection manager") Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Acked-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/thunderbolt/tb.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -225,6 +225,7 @@ static void tb_activate_pcie_devices(str tb_port_info(up_port, "PCIe tunnel activation failed, aborting\n"); tb_pci_free(tunnel); + continue; } list_add(&tunnel->list, &tcm->tunnel_list); Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-4.14/thunderbolt-tb-fix-use-after-free-in-tb_activate_pcie_devices.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "thermal/drivers/step_wise: Fix temperature regulation misbehavior" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled thermal/drivers/step_wise: Fix temperature regulation misbehavior to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: thermal-drivers-step_wise-fix-temperature-regulation-misbehavior.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Daniel Lezcano <daniel.lezcano(a)linaro.org> Date: Thu, 19 Oct 2017 19:05:58 +0200 Subject: thermal/drivers/step_wise: Fix temperature regulation misbehavior From: Daniel Lezcano <daniel.lezcano(a)linaro.org> [ Upstream commit 07209fcf33542c1ff1e29df2dbdf8f29cdaacb10 ] There is a particular situation when the cooling device is cpufreq and the heat dissipation is not efficient enough where the temperature increases little by little until reaching the critical threshold and leading to a SoC reset. The behavior is reproducible on a hikey6220 with bad heat dissipation (eg. stacked with other boards). Running a simple C program doing while(1); for each CPU of the SoC makes the temperature to reach the passive regulation trip point and ends up to the maximum allowed temperature followed by a reset. This issue has been also reported by running the libhugetlbfs test suite. What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz while the temperature continues to grow. It appears the step wise governor calls get_target_state() the first time with the throttle set to true and the trend to 'raising'. The code selects logically the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so good. The temperature decreases immediately but still stays greater than the trip point, then get_target_state() is called again, this time with the throttle set to true *and* the trend to 'dropping'. From there the algorithm assumes we have to step down the state and the cpu frequency jumps back to 1.2GHz. But the temperature is still higher than the trip point, so get_target_state() is called with throttle=1 and trend='raising' again, we jump to 900MHz, then get_target_state() is called with throttle=1 and trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not stabilizes and continues to increase. [ 237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 237.922690] thermal cooling_device0: cur_state=0 [ 237.922701] thermal cooling_device0: old_target=0, target=1 [ 238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 238.026694] thermal cooling_device0: cur_state=1 [ 238.026707] thermal cooling_device0: old_target=1, target=0 [ 238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 238.134679] thermal cooling_device0: cur_state=0 [ 238.134690] thermal cooling_device0: old_target=0, target=1 In this situation the temperature continues to increase while the trend is oscillating between 'dropping' and 'raising'. We need to keep the current state untouched if the throttle is set, so the temperature can decrease or a higher state could be selected, thus preventing this oscillation. Keeping the next_target untouched when 'throttle' is true at 'dropping' time fixes the issue. The following traces show the governor does not change the next state if trend==2 (dropping) and throttle==1. [ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2306.128021] thermal cooling_device0: cur_state=0 [ 2306.128031] thermal cooling_device0: old_target=0, target=1 [ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 2306.232030] thermal cooling_device0: cur_state=1 [ 2306.232042] thermal cooling_device0: old_target=1, target=1 [ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1 [ 2306.336021] thermal cooling_device0: cur_state=1 [ 2306.336034] thermal cooling_device0: old_target=1, target=1 [ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2306.440022] thermal cooling_device0: cur_state=1 [ 2306.440034] thermal cooling_device0: old_target=1, target=0 [ ... ] After a while, if the temperature continues to increase, the next state becomes 2 which is 720MHz on the hikey. That results in the temperature stabilizing around the trip point. [ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0 [ 2455.832019] thermal cooling_device0: cur_state=1 [ 2455.832032] thermal cooling_device0: old_target=1, target=1 [ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2455.936027] thermal cooling_device0: cur_state=1 [ 2455.936040] thermal cooling_device0: old_target=1, target=1 [ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2456.044023] thermal cooling_device0: cur_state=1 [ 2456.044036] thermal cooling_device0: old_target=1, target=1 [ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2456.148042] thermal cooling_device0: cur_state=1 [ 2456.148055] thermal cooling_device0: old_target=1, target=2 [ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2456.252058] thermal cooling_device0: cur_state=2 [ 2456.252075] thermal cooling_device0: old_target=2, target=1 IOW, this change is needed to keep the state for a cooling device if the temperature trend is oscillating while the temperature increases slightly. Without this change, the situation above leads to a catastrophic crash by a hardware reset on hikey. This issue has been reported to happen on an OMAP dra7xx also. Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> Cc: Keerthy <j-keerthy(a)ti.com> Cc: John Stultz <john.stultz(a)linaro.org> Cc: Leo Yan <leo.yan(a)linaro.org> Tested-by: Keerthy <j-keerthy(a)ti.com> Reviewed-by: Keerthy <j-keerthy(a)ti.com> Signed-off-by: Eduardo Valentin <edubezval(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/thermal/step_wise.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -31,8 +31,7 @@ * If the temperature is higher than a trip point, * a. if the trend is THERMAL_TREND_RAISING, use higher cooling * state for this trip point - * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling - * state for this trip point + * b. if the trend is THERMAL_TREND_DROPPING, do nothing * c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit * for this trip point * d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit @@ -94,9 +93,11 @@ static unsigned long get_target_state(st if (!throttle) next_target = THERMAL_NO_TARGET; } else { - next_target = cur_state - 1; - if (next_target > instance->upper) - next_target = instance->upper; + if (!throttle) { + next_target = cur_state - 1; + if (next_target > instance->upper) + next_target = instance->upper; + } } break; case THERMAL_TREND_DROP_FULL: Patches currently in stable-queue which might be from daniel.lezcano(a)linaro.org are queue-4.14/thermal-drivers-step_wise-fix-temperature-regulation-misbehavior.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Bart Van Assche <bart.vanassche(a)wdc.com> Date: Tue, 31 Oct 2017 11:03:17 -0700 Subject: target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() From: Bart Van Assche <bart.vanassche(a)wdc.com> [ Upstream commit cfe2b621bb18d86e93271febf8c6e37622da2d14 ] Avoid that cmd->se_cmd.se_tfo is read after a command has already been freed. Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Mike Christie <mchristi(a)redhat.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/iscsi/iscsi_target.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -834,6 +834,7 @@ static int iscsit_add_reject_from_cmd( unsigned char *buf) { struct iscsi_conn *conn; + const bool do_put = cmd->se_cmd.se_tfo != NULL; if (!cmd->conn) { pr_err("cmd->conn is NULL for ITT: 0x%08x\n", @@ -864,7 +865,7 @@ static int iscsit_add_reject_from_cmd( * Perform the kref_put now if se_cmd has already been setup by * scsit_setup_scsi_cmd() */ - if (cmd->se_cmd.se_tfo != NULL) { + if (do_put) { pr_debug("iscsi reject: calling target_put_sess_cmd >>>>>>\n"); target_put_sess_cmd(&cmd->se_cmd); } Patches currently in stable-queue which might be from bart.vanassche(a)wdc.com are queue-4.14/ib-core-fix-endianness-annotation-in-rdma_is_multicast_addr.patch queue-4.14/target-iscsi-detect-conn_cmd_list-corruption-early.patch queue-4.14/target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch queue-4.14/rdma-cma-avoid-triggering-undefined-behavior.patch queue-4.14/scsi-core-fix-a-scsi_show_rq-null-pointer-dereference.patch queue-4.14/blk-mq-sched-dispatch-from-scheduler-iff-progress-is-made-in-dispatch.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "target/iscsi: Detect conn_cmd_list corruption early" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled target/iscsi: Detect conn_cmd_list corruption early to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: target-iscsi-detect-conn_cmd_list-corruption-early.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Bart Van Assche <bart.vanassche(a)wdc.com> Date: Tue, 31 Oct 2017 11:03:18 -0700 Subject: target/iscsi: Detect conn_cmd_list corruption early From: Bart Van Assche <bart.vanassche(a)wdc.com> [ Upstream commit 6eaf69e4ec075f5af236c0c89f75639a195db904 ] Certain behavior of the initiator can cause the target driver to send both a reject and a SCSI response. If that happens two target_put_sess_cmd() calls will occur without the command having been removed from conn_cmd_list. In other words, conn_cmd_list will get corrupted once the freed memory is reused. Although the Linux kernel can detect list corruption if list debugging is enabled, in this case the context in which list corruption is detected is not related to the context that caused list corruption. Hence add WARN_ON() statements that report the context that is causing list corruption. Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Mike Christie <mchristi(a)redhat.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/iscsi/iscsi_target_util.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -694,6 +694,8 @@ void iscsit_release_cmd(struct iscsi_cmd struct iscsi_session *sess; struct se_cmd *se_cmd = &cmd->se_cmd; + WARN_ON(!list_empty(&cmd->i_conn_node)); + if (cmd->conn) sess = cmd->conn->sess; else @@ -716,6 +718,8 @@ void __iscsit_free_cmd(struct iscsi_cmd { struct iscsi_conn *conn = cmd->conn; + WARN_ON(!list_empty(&cmd->i_conn_node)); + if (cmd->data_direction == DMA_TO_DEVICE) { iscsit_stop_dataout_timer(cmd); iscsit_free_r2ts_from_list(cmd); Patches currently in stable-queue which might be from bart.vanassche(a)wdc.com are queue-4.14/ib-core-fix-endianness-annotation-in-rdma_is_multicast_addr.patch queue-4.14/target-iscsi-detect-conn_cmd_list-corruption-early.patch queue-4.14/target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch queue-4.14/rdma-cma-avoid-triggering-undefined-behavior.patch queue-4.14/scsi-core-fix-a-scsi_show_rq-null-pointer-dereference.patch queue-4.14/blk-mq-sched-dispatch-from-scheduler-iff-progress-is-made-in-dispatch.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "target:fix condition return in core_pr_dump_initiator_port()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled target:fix condition return in core_pr_dump_initiator_port() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: target-fix-condition-return-in-core_pr_dump_initiator_port.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: tangwenji <tang.wenji(a)zte.com.cn> Date: Thu, 24 Aug 2017 19:59:37 +0800 Subject: target:fix condition return in core_pr_dump_initiator_port() From: tangwenji <tang.wenji(a)zte.com.cn> [ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ] When is pr_reg->isid_present_at_reg is false,this function should return. This fixes a regression originally introduced by: commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5 Author: Andy Grover <agrover(a)redhat.com> Date: Thu May 16 10:40:55 2013 -0700 target: Alter core_pr_dump_initiator_port for ease of use Signed-off-by: tangwenji <tang.wenji(a)zte.com.cn> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/target_core_pr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -58,8 +58,10 @@ void core_pr_dump_initiator_port( char *buf, u32 size) { - if (!pr_reg->isid_present_at_reg) + if (!pr_reg->isid_present_at_reg) { buf[0] = '\0'; + return; + } snprintf(buf, size, ",i,0x%s", pr_reg->pr_reg_isid); } Patches currently in stable-queue which might be from tang.wenji(a)zte.com.cn are queue-4.14/target-fix-condition-return-in-core_pr_dump_initiator_port.patch queue-4.14/iscsi-target-fix-memory-leak-in-lio_target_tiqn_addtpg.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "target/file: Do not return error for UNMAP if length is zero" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled target/file: Do not return error for UNMAP if length is zero to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: target-file-do-not-return-error-for-unmap-if-length-is-zero.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Jiang Yi <jiangyilism(a)gmail.com> Date: Fri, 11 Aug 2017 11:29:44 +0800 Subject: target/file: Do not return error for UNMAP if length is zero From: Jiang Yi <jiangyilism(a)gmail.com> [ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ] The function fd_execute_unmap() in target_core_file.c calles ret = file->f_op->fallocate(file, mode, pos, len); Some filesystems implement fallocate() to return error if length is zero (e.g. btrfs) but according to SCSI Block Commands spec UNMAP should return success for zero length. Signed-off-by: Jiang Yi <jiangyilism(a)gmail.com> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/target_core_file.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -482,6 +482,10 @@ fd_execute_unmap(struct se_cmd *cmd, sec struct inode *inode = file->f_mapping->host; int ret; + if (!nolb) { + return 0; + } + if (cmd->se_dev->dev_attrib.pi_prot_type) { ret = fd_do_prot_unmap(cmd, lba, nolb); if (ret) Patches currently in stable-queue which might be from jiangyilism(a)gmail.com are queue-4.14/target-file-do-not-return-error-for-unmap-if-length-is-zero.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "staging: rtl8188eu: Revert part of "staging: rtl8188eu: fix comments with lines over 80 characters"" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: rtl8188eu: Revert part of "staging: rtl8188eu: fix comments with lines over 80 characters" to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-rtl8188eu-revert-part-of-staging-rtl8188eu-fix-comments-with-lines-over-80-characters.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Hans de Goede <hdegoede(a)redhat.com> Date: Thu, 2 Nov 2017 10:30:11 +0100 Subject: staging: rtl8188eu: Revert part of "staging: rtl8188eu: fix comments with lines over 80 characters" From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 4004a9870bbefdb6644c3d2033f5315920a3b669 ] Commit 74e1e498e84e ("staging: rtl8188eu: fix comments with lines over 80 characters") not only changed comments but also changed an if check: -if (pmlmepriv->cur_network.join_res != true) { +if (!(pmlmepriv->cur_network.join_res)) { This is not equivalent as join_res is an int and can have values such as -2 and -3. Note for the next time, please only make one type of changes in a single clean-up commit. Fixes: 74e1e498e84e ("staging: rtl8188eu: fix comments with lines over 80 ...") Cc: Juliana Rodrigues <juliana.orod(a)gmail.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/rtl8188eu/core/rtw_ap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/staging/rtl8188eu/core/rtw_ap.c +++ b/drivers/staging/rtl8188eu/core/rtw_ap.c @@ -754,7 +754,7 @@ static void start_bss_network(struct ada } /* setting only at first time */ - if (!(pmlmepriv->cur_network.join_res)) { + if (pmlmepriv->cur_network.join_res != true) { /* WEP Key will be set before this function, do not * clear CAM. */ Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.14/usb-uas-and-storage-add-us_fl_broken_fua-for-another-jmicron-jms567-id.patch queue-4.14/staging-rtl8188eu-revert-part-of-staging-rtl8188eu-fix-comments-with-lines-over-80-characters.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "soc: mediatek: pwrap: fix compiler errors" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled soc: mediatek: pwrap: fix compiler errors to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: soc-mediatek-pwrap-fix-compiler-errors.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Matthias Brugger <matthias.bgg(a)gmail.com> Date: Sat, 21 Oct 2017 10:17:47 +0200 Subject: soc: mediatek: pwrap: fix compiler errors From: Matthias Brugger <matthias.bgg(a)gmail.com> [ Upstream commit fb2c1934f30577756e55e24e8870b45c78da3bc2 ] When compiling using sparse, we got the following error: drivers/soc/mediatek/mtk-pmic-wrap.c:686:25: error: dubious one-bit signed bitfield Changing the data type to unsigned fixes this. Signed-off-by: Matthias Brugger <matthias.bgg(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -522,7 +522,7 @@ struct pmic_wrapper_type { u32 int_en_all; u32 spi_w; u32 wdt_src; - int has_bridge:1; + unsigned int has_bridge:1; int (*init_reg_clock)(struct pmic_wrapper *wrp); int (*init_soc_specific)(struct pmic_wrapper *wrp); }; Patches currently in stable-queue which might be from matthias.bgg(a)gmail.com are queue-4.14/soc-mediatek-pwrap-fix-compiler-errors.patch queue-4.14/iommu-mediatek-fix-driver-name.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "sfc: don't warn on successful change of MAC" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sfc: don't warn on successful change of MAC to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sfc-don-t-warn-on-successful-change-of-mac.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Robert Stonehouse <rstonehouse(a)solarflare.com> Date: Tue, 7 Nov 2017 17:30:30 +0000 Subject: sfc: don't warn on successful change of MAC From: Robert Stonehouse <rstonehouse(a)solarflare.com> [ Upstream commit cbad52e92ad7f01f0be4ca58bde59462dc1afe3a ] Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by: Bert Kenward <bkenward(a)solarflare.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/sfc/ef10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -5726,7 +5726,7 @@ static int efx_ef10_set_mac_address(stru * MCFW do not support VFs. */ rc = efx_ef10_vport_set_mac_address(efx); - } else { + } else if (rc) { efx_mcdi_display_error(efx, MC_CMD_VADAPTOR_SET_MAC, sizeof(inbuf), NULL, 0, rc); } Patches currently in stable-queue which might be from rstonehouse(a)solarflare.com are queue-4.14/sfc-don-t-warn-on-successful-change-of-mac.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "serdev: ttyport: enforce tty-driver open() requirement" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serdev: ttyport: enforce tty-driver open() requirement to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serdev-ttyport-enforce-tty-driver-open-requirement.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 16 Oct 2017 15:06:19 +0200 Subject: serdev: ttyport: enforce tty-driver open() requirement From: Johan Hovold <johan(a)kernel.org> [ Upstream commit dee7d0f3b200c67c6ee96bd37c6e8fa52690ab56 ] The tty-driver open routine is mandatory, but the serdev tty-port-controller implementation did not treat it as such and would instead fall back to calling tty_port_open() directly. Signed-off-by: Johan Hovold <johan(a)kernel.org> Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serdev/serdev-ttyport.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -120,10 +120,10 @@ static int ttyport_open(struct serdev_co return PTR_ERR(tty); serport->tty = tty; - if (tty->ops->open) - tty->ops->open(serport->tty, NULL); - else - tty_port_open(serport->port, tty, NULL); + if (!tty->ops->open) + goto err_unlock; + + tty->ops->open(serport->tty, NULL); /* Bring the UART into a known 8 bits no parity hw fc state */ ktermios = tty->termios; @@ -140,6 +140,12 @@ static int ttyport_open(struct serdev_co tty_unlock(serport->tty); return 0; + +err_unlock: + tty_unlock(tty); + tty_release_struct(tty, serport->tty_idx); + + return -ENODEV; } static void ttyport_close(struct serdev_controller *ctrl) Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.14/serdev-ttyport-enforce-tty-driver-open-requirement.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: sd: change manage_start_stop to bool in sysfs interface" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: sd: change manage_start_stop to bool in sysfs interface to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-sd-change-manage_start_stop-to-bool-in-sysfs-interface.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: weiping zhang <zhangweiping(a)didichuxing.com> Date: Thu, 12 Oct 2017 14:57:06 +0800 Subject: scsi: sd: change manage_start_stop to bool in sysfs interface From: weiping zhang <zhangweiping(a)didichuxing.com> [ Upstream commit 623401ee33e42cee64d333877892be8db02951eb ] /sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0 unexpectly by writing an invalid string. Signed-off-by: weiping zhang <zhangweiping(a)didichuxing.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/sd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -231,11 +231,15 @@ manage_start_stop_store(struct device *d { struct scsi_disk *sdkp = to_scsi_disk(dev); struct scsi_device *sdp = sdkp->device; + bool v; if (!capable(CAP_SYS_ADMIN)) return -EACCES; - sdp->manage_start_stop = simple_strtoul(buf, NULL, 10); + if (kstrtobool(buf, &v)) + return -EINVAL; + + sdp->manage_start_stop = v; return count; } Patches currently in stable-queue which might be from zhangweiping(a)didichuxing.com are queue-4.14/scsi-sd-change-allow_restart-to-bool-in-sysfs-interface.patch queue-4.14/scsi-sd-change-manage_start_stop-to-bool-in-sysfs-interface.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: sd: change allow_restart to bool in sysfs interface" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: sd: change allow_restart to bool in sysfs interface to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-sd-change-allow_restart-to-bool-in-sysfs-interface.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: weiping zhang <zhangweiping(a)didichuxing.com> Date: Thu, 12 Oct 2017 14:56:44 +0800 Subject: scsi: sd: change allow_restart to bool in sysfs interface From: weiping zhang <zhangweiping(a)didichuxing.com> [ Upstream commit 658e9a6dc1126f21fa417cd213e1cdbff8be0ba2 ] /sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0 unexpectedly by writing an invalid string such as the following: echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart Signed-off-by: weiping zhang <zhangweiping(a)didichuxing.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/sd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -257,6 +257,7 @@ static ssize_t allow_restart_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + bool v; struct scsi_disk *sdkp = to_scsi_disk(dev); struct scsi_device *sdp = sdkp->device; @@ -266,7 +267,10 @@ allow_restart_store(struct device *dev, if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) return -EINVAL; - sdp->allow_restart = simple_strtoul(buf, NULL, 10); + if (kstrtobool(buf, &v)) + return -EINVAL; + + sdp->allow_restart = v; return count; } Patches currently in stable-queue which might be from zhangweiping(a)didichuxing.com are queue-4.14/scsi-sd-change-allow_restart-to-bool-in-sysfs-interface.patch queue-4.14/scsi-sd-change-manage_start_stop-to-bool-in-sysfs-interface.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-scsi_devinfo-add-reportlun2-to-emc-symmetrix-blacklist-entry.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Kurt Garloff <garloff(a)suse.de> Date: Tue, 17 Oct 2017 09:10:45 +0200 Subject: scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry From: Kurt Garloff <garloff(a)suse.de> [ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ] All EMC SYMMETRIX support REPORT_LUNS, even if configured to report SCSI-2 for whatever reason. Signed-off-by: Kurt Garloff <garloff(a)suse.de> Signed-off-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_devinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -161,7 +161,7 @@ static struct { {"DGC", "RAID", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, storage on LUN 0 */ {"DGC", "DISK", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, no storage on LUN 0 */ {"EMC", "Invista", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, - {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_FORCELUN}, + {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_REPORTLUN2}, {"EMULEX", "MD21/S2 ESDI", NULL, BLIST_SINGLELUN}, {"easyRAID", "16P", NULL, BLIST_NOREPORTLUN}, {"easyRAID", "X6P", NULL, BLIST_NOREPORTLUN}, Patches currently in stable-queue which might be from garloff(a)suse.de are queue-4.14/scsi-scsi_devinfo-add-reportlun2-to-emc-symmetrix-blacklist-entry.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: scsi_debug: write_same: fix error report" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: scsi_debug: write_same: fix error report to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-scsi_debug-write_same-fix-error-report.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Douglas Gilbert <dgilbert(a)interlog.com> Date: Sun, 29 Oct 2017 10:47:19 -0400 Subject: scsi: scsi_debug: write_same: fix error report From: Douglas Gilbert <dgilbert(a)interlog.com> [ Upstream commit e33d7c56450b0a5c7290cbf9e1581fab5174f552 ] The scsi_debug driver incorrectly suggests there is an error with the SCSI WRITE SAME command when the number_of_logical_blocks is greater than 1. It will also suggest there is an error when NDOB (no data-out buffer) is set and the number_of_logical_blocks is greater than 0. Both are valid, fix. Signed-off-by: Douglas Gilbert <dgilbert(a)interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_debug.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -3001,11 +3001,11 @@ static int resp_write_same(struct scsi_c if (-1 == ret) { write_unlock_irqrestore(&atomic_rw, iflags); return DID_ERROR << 16; - } else if (sdebug_verbose && (ret < (num * sdebug_sector_size))) + } else if (sdebug_verbose && !ndob && (ret < sdebug_sector_size)) sdev_printk(KERN_INFO, scp->device, - "%s: %s: cdb indicated=%u, IO sent=%d bytes\n", + "%s: %s: lb size=%u, IO sent=%d bytes\n", my_name, "write same", - num * sdebug_sector_size, ret); + sdebug_sector_size, ret); /* Copy first sector to remaining blocks */ for (i = 1 ; i < num ; i++) Patches currently in stable-queue which might be from dgilbert(a)interlog.com are queue-4.14/scsi-scsi_debug-write_same-fix-error-report.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: hpsa: destroy sas transport properties before scsi_host" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: hpsa: destroy sas transport properties before scsi_host to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-hpsa-destroy-sas-transport-properties-before-scsi_host.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Martin Wilck <mwilck(a)suse.de> Date: Fri, 20 Oct 2017 16:51:08 -0500 Subject: scsi: hpsa: destroy sas transport properties before scsi_host From: Martin Wilck <mwilck(a)suse.de> [ Upstream commit dfb2e6f46b3074eb85203d8f0888b71ec1c2e37a ] This patch cleans up a lot of warnings when unloading the driver. A current example of the stack trace starts with: [ 142.570715] sysfs group 'power' not found for kobject 'port-5:0' There can be hundreds of these messages during a driver unload. I am resubmitting this patch on behalf of Martin Wilck with his permission. His original patch can be found here: https://www.spinics.net/lists/linux-scsi/msg102085.html This patch did not help until Hannes's commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod") was applied to the kernel. --------------------------- Original patch description: --------------------------- Unloading the hpsa driver causes warnings [ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240() [ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0' with two different stacks: 1) [ 1063.793774] [<ffffffff81448af4>] device_del+0x54/0x240 [ 1063.793780] [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60 [ 1063.793784] [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0 [ 1063.793802] [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas] [ 1063.793819] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa] 2) [ 1063.797103] [<ffffffff81448af4>] device_del+0x54/0x240 [ 1063.797118] [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas] [ 1063.797134] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa] This is caused by the fact that host device hostX is deleted before the SAS transport devices hostX/port-a:b. This patch fixes this by reverting the order of device deletions. Tested-by: Don Brace <don.brace(a)microsemi.com> Reviewed-by: Don Brace <don.brace(a)microsemi.com> Signed-off-by: Martin Wilck <mwilck(a)suse.de> Signed-off-by: Don Brace <don.brace(a)microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/hpsa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -8684,6 +8684,8 @@ static void hpsa_remove_one(struct pci_d destroy_workqueue(h->rescan_ctlr_wq); destroy_workqueue(h->resubmit_wq); + hpsa_delete_sas_host(h); + /* * Call before disabling interrupts. * scsi_remove_host can trigger I/O operations especially @@ -8718,8 +8720,6 @@ static void hpsa_remove_one(struct pci_d h->lockup_detected = NULL; /* init_one 2 */ /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */ - hpsa_delete_sas_host(h); - kfree(h); /* init_one 1 */ } Patches currently in stable-queue which might be from mwilck(a)suse.de are queue-4.14/scsi-hpsa-cleanup-sas_phy-structures-in-sysfs-when-unloading.patch queue-4.14/scsi-hpsa-destroy-sas-transport-properties-before-scsi_host.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: hpsa: cleanup sas_phy structures in sysfs when unloading" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: hpsa: cleanup sas_phy structures in sysfs when unloading to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-hpsa-cleanup-sas_phy-structures-in-sysfs-when-unloading.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Martin Wilck <mwilck(a)suse.de> Date: Fri, 20 Oct 2017 16:51:14 -0500 Subject: scsi: hpsa: cleanup sas_phy structures in sysfs when unloading From: Martin Wilck <mwilck(a)suse.de> [ Upstream commit 55ca38b4255bb336c2d35990bdb2b368e19b435a ] I am resubmitting this patch on behalf of Martin Wilck with his permission. The original patch can be found here: https://www.spinics.net/lists/linux-scsi/msg102083.html This patch did not help until Hannes's commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod") was applied to the kernel. -------------------------------------- Original patch description from Martin: -------------------------------------- When the hpsa module is unloaded using rmmod, dangling symlinks remain under /sys/class/sas_phy. Fix this by calling sas_phy_delete() rather than sas_phy_free (which, according to comments, should not be called for PHYs that have been set up successfully, anyway). Tested-by: Don Brace <don.brace(a)microsemi.com> Reviewed-by: Don Brace <don.brace(a)microsemi.com> Signed-off-by: Martin Wilck <mwilck(a)suse.de> Signed-off-by: Don Brace <don.brace(a)microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/hpsa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -9207,9 +9207,9 @@ static void hpsa_free_sas_phy(struct hps struct sas_phy *phy = hpsa_sas_phy->phy; sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy); - sas_phy_free(phy); if (hpsa_sas_phy->added_to_port) list_del(&hpsa_sas_phy->phy_list_entry); + sas_phy_delete(phy); kfree(hpsa_sas_phy); } Patches currently in stable-queue which might be from mwilck(a)suse.de are queue-4.14/scsi-hpsa-cleanup-sas_phy-structures-in-sysfs-when-unloading.patch queue-4.14/scsi-hpsa-destroy-sas-transport-properties-before-scsi_host.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: hisi_sas: fix the risk of freeing slot twice" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: hisi_sas: fix the risk of freeing slot twice to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-hisi_sas-fix-the-risk-of-freeing-slot-twice.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Xiaofei Tan <tanxiaofei(a)huawei.com> Date: Tue, 24 Oct 2017 23:51:38 +0800 Subject: scsi: hisi_sas: fix the risk of freeing slot twice From: Xiaofei Tan <tanxiaofei(a)huawei.com> [ Upstream commit 6ba0fbc35aa9f3bc8c12be3b4047055c9ce2ac92 ] The function hisi_sas_slot_task_free() is used to free the slot and do tidy-up of LLDD resources. The LLDD generally should know the state of a slot and decide when to free it, and it should only be done once. For some scenarios, we really don't know the state, like when TMF timeout. In this case, we check task->lldd_task before calling hisi_sas_slot_task_free(). However, we may miss some scenarios when we should also check task->lldd_task, and it is not SMP safe to check task->lldd_task as we don't protect it within spin lock. This patch is to fix this risk of freeing slot twice, as follows: 1. Check task->lldd_task in the hisi_sas_slot_task_free(), and give up freeing of this time if task->lldd_task is NULL. 2. Set slot->buf to NULL after it is freed. Signed-off-by: Xiaofei Tan <tanxiaofei(a)huawei.com> Signed-off-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/hisi_sas/hisi_sas_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -185,13 +185,16 @@ void hisi_sas_slot_task_free(struct hisi struct domain_device *device = task->dev; struct hisi_sas_device *sas_dev = device->lldd_dev; + if (!task->lldd_task) + return; + + task->lldd_task = NULL; + if (!sas_protocol_ata(task->task_proto)) if (slot->n_elem) dma_unmap_sg(dev, task->scatter, slot->n_elem, task->data_dir); - task->lldd_task = NULL; - if (sas_dev) atomic64_dec(&sas_dev->running_req); } @@ -199,8 +202,8 @@ void hisi_sas_slot_task_free(struct hisi if (slot->buf) dma_pool_free(hisi_hba->buffer_pool, slot->buf, slot->buf_dma); - list_del_init(&slot->entry); + slot->buf = NULL; slot->task = NULL; slot->port = NULL; hisi_sas_slot_index_free(hisi_hba, slot->idx); Patches currently in stable-queue which might be from tanxiaofei(a)huawei.com are queue-4.14/scsi-hisi_sas-fix-the-risk-of-freeing-slot-twice.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: bfa: integer overflow in debugfs" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: bfa: integer overflow in debugfs to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-bfa-integer-overflow-in-debugfs.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Wed, 4 Oct 2017 10:50:37 +0300 Subject: scsi: bfa: integer overflow in debugfs From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ] We could allocate less memory than intended because we do: bfad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. I fixed the network version of this in March with commit 13e2d5187f6b ("bna: integer overflow bug in debugfs"). Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/bfa/bfad_debugfs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/scsi/bfa/bfad_debugfs.c +++ b/drivers/scsi/bfa/bfad_debugfs.c @@ -255,7 +255,8 @@ bfad_debugfs_write_regrd(struct file *fi struct bfad_s *bfad = port->bfad; struct bfa_s *bfa = &bfad->bfa; struct bfa_ioc_s *ioc = &bfa->ioc; - int addr, len, rc, i; + int addr, rc, i; + u32 len; u32 *regbuf; void __iomem *rb, *reg_addr; unsigned long flags; @@ -266,7 +267,7 @@ bfad_debugfs_write_regrd(struct file *fi return PTR_ERR(kern_buf); rc = sscanf(kern_buf, "%x:%x", &addr, &len); - if (rc < 2) { + if (rc < 2 || len > (UINT_MAX >> 2)) { printk(KERN_INFO "bfad[%d]: %s failed to read user buf\n", bfad->inst_no, __func__); Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.14/scsi-bfa-integer-overflow-in-debugfs.patch queue-4.14/fbdev-controlfb-add-missing-modes-to-fix-out-of-bounds-access.patch queue-4.14/misc-pci_endpoint_test-avoid-triggering-a-bug.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "scsi: aacraid: use timespec64 instead of timeval" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: aacraid: use timespec64 instead of timeval to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-aacraid-use-timespec64-instead-of-timeval.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Arnd Bergmann <arnd(a)arndb.de> Date: Tue, 7 Nov 2017 11:46:05 +0100 Subject: scsi: aacraid: use timespec64 instead of timeval From: Arnd Bergmann <arnd(a)arndb.de> [ Upstream commit 820f188659122602ab217dd80cfa32b3ac0c55c0 ] aacraid passes the current time to the firmware in one of two ways, either as year/month/day/... or as 32-bit unsigned seconds. The first one is broken on 32-bit architectures as it cannot go past year 2038. Using timespec64 here makes it behave properly on both 32-bit and 64-bit architectures, and avoids relying on signed integer overflow to pass times into the second interface. The interface used in aac_send_hosttime() however is still problematic in year 2106 when 32-bit seconds overflow. Hopefully we don't have to worry about aacraid by that time. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Reviewed-by: Dave Carroll <david.carroll(a)microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/aacraid/commsup.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -2383,19 +2383,19 @@ fib_free_out: goto out; } -int aac_send_safw_hostttime(struct aac_dev *dev, struct timeval *now) +int aac_send_safw_hostttime(struct aac_dev *dev, struct timespec64 *now) { struct tm cur_tm; char wellness_str[] = "<HW>TD\010\0\0\0\0\0\0\0\0\0DW\0\0ZZ"; u32 datasize = sizeof(wellness_str); - unsigned long local_time; + time64_t local_time; int ret = -ENODEV; if (!dev->sa_firmware) goto out; - local_time = (u32)(now->tv_sec - (sys_tz.tz_minuteswest * 60)); - time_to_tm(local_time, 0, &cur_tm); + local_time = (now->tv_sec - (sys_tz.tz_minuteswest * 60)); + time64_to_tm(local_time, 0, &cur_tm); cur_tm.tm_mon += 1; cur_tm.tm_year += 1900; wellness_str[8] = bin2bcd(cur_tm.tm_hour); @@ -2412,7 +2412,7 @@ out: return ret; } -int aac_send_hosttime(struct aac_dev *dev, struct timeval *now) +int aac_send_hosttime(struct aac_dev *dev, struct timespec64 *now) { int ret = -ENOMEM; struct fib *fibptr; @@ -2424,7 +2424,7 @@ int aac_send_hosttime(struct aac_dev *de aac_fib_init(fibptr); info = (__le32 *)fib_data(fibptr); - *info = cpu_to_le32(now->tv_sec); + *info = cpu_to_le32(now->tv_sec); /* overflow in y2106 */ ret = aac_fib_send(SendHostTime, fibptr, sizeof(*info), FsaNormal, 1, 1, NULL, NULL); @@ -2496,7 +2496,7 @@ int aac_command_thread(void *data) } if (!time_before(next_check_jiffies,next_jiffies) && ((difference = next_jiffies - jiffies) <= 0)) { - struct timeval now; + struct timespec64 now; int ret; /* Don't even try to talk to adapter if its sick */ @@ -2506,15 +2506,15 @@ int aac_command_thread(void *data) next_check_jiffies = jiffies + ((long)(unsigned)check_interval) * HZ; - do_gettimeofday(&now); + ktime_get_real_ts64(&now); /* Synchronize our watches */ - if (((1000000 - (1000000 / HZ)) > now.tv_usec) - && (now.tv_usec > (1000000 / HZ))) - difference = (((1000000 - now.tv_usec) * HZ) - + 500000) / 1000000; + if (((NSEC_PER_SEC - (NSEC_PER_SEC / HZ)) > now.tv_nsec) + && (now.tv_nsec > (NSEC_PER_SEC / HZ))) + difference = (((NSEC_PER_SEC - now.tv_nsec) * HZ) + + NSEC_PER_SEC / 2) / NSEC_PER_SEC; else { - if (now.tv_usec > 500000) + if (now.tv_nsec > NSEC_PER_SEC / 2) ++now.tv_sec; if (dev->sa_firmware) Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.14/scsi-aacraid-use-timespec64-instead-of-timeval.patch queue-4.14/string.h-workaround-for-increased-stack-usage.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp1" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp1 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: samples-bpf-adjust-rlimit-rlimit_memlock-for-xdp1.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Tushar Dave <tushar.n.dave(a)oracle.com> Date: Fri, 27 Oct 2017 16:12:30 -0700 Subject: samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp1 From: Tushar Dave <tushar.n.dave(a)oracle.com> [ Upstream commit 6dfca831c03ef654b1f7bff1b8d487d330e9f76b ] Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure. e.g. [root@lab bpf]#./xdp1 -N $(</sys/class/net/eth2/ifindex) failed to create a map: 1 Operation not permitted Fix it. Signed-off-by: Tushar Dave <tushar.n.dave(a)oracle.com> Acked-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- samples/bpf/xdp1_user.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/samples/bpf/xdp1_user.c +++ b/samples/bpf/xdp1_user.c @@ -14,6 +14,7 @@ #include <string.h> #include <unistd.h> #include <libgen.h> +#include <sys/resource.h> #include "bpf_load.h" #include "bpf_util.h" @@ -69,6 +70,7 @@ static void usage(const char *prog) int main(int argc, char **argv) { + struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY}; const char *optstr = "SN"; char filename[256]; int opt; @@ -91,6 +93,12 @@ int main(int argc, char **argv) usage(basename(argv[0])); return 1; } + + if (setrlimit(RLIMIT_MEMLOCK, &r)) { + perror("setrlimit(RLIMIT_MEMLOCK)"); + return 1; + } + ifindex = strtoul(argv[optind], NULL, 0); snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]); Patches currently in stable-queue which might be from tushar.n.dave(a)oracle.com are queue-4.14/samples-bpf-adjust-rlimit-rlimit_memlock-for-xdp1.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_disassoc_cmd.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Sun, 8 Oct 2017 19:54:07 +0800 Subject: rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 08880f8e08cbd814e870e9d3ab9530abc1bce226 ] The driver may sleep under a spinlock, and the function call path is: rtw_set_802_11_bssid(acquire the spinlock) rtw_disassoc_cmd kzalloc(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool and my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/staging/rtl8188eu/core/rtw_cmd.c +++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c @@ -508,7 +508,7 @@ u8 rtw_disassoc_cmd(struct adapter *pada if (enqueue) { /* need enqueue, prepare cmd_obj and enqueue */ - cmdobj = kzalloc(sizeof(*cmdobj), GFP_KERNEL); + cmdobj = kzalloc(sizeof(*cmdobj), GFP_ATOMIC); if (!cmdobj) { res = _FAIL; kfree(param); Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.14/rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_createbss_cmd.patch queue-4.14/rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_disassoc_cmd.patch queue-4.14/vt6655-fix-a-possible-sleep-in-atomic-bug-in-vt6655_suspend.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_createbss_cmd.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Sun, 8 Oct 2017 19:54:45 +0800 Subject: rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 2bf9806d4228f7a6195f8e03eda0479d2a93b411 ] The driver may sleep under a spinlock, and the function call path is: rtw_surveydone_event_callback(acquire the spinlock) rtw_createbss_cmd kzalloc(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool and my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/staging/rtl8188eu/core/rtw_cmd.c +++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c @@ -333,7 +333,7 @@ u8 rtw_createbss_cmd(struct adapter *pa else RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, (" createbss for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid)); - pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + pcmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (!pcmd) { res = _FAIL; goto exit; Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.14/rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_createbss_cmd.patch queue-4.14/rtl8188eu-fix-a-possible-sleep-in-atomic-bug-in-rtw_disassoc_cmd.patch queue-4.14/vt6655-fix-a-possible-sleep-in-atomic-bug-in-vt6655_suspend.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "rtc: pcf8563: fix output clock rate" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: pcf8563: fix output clock rate to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-pcf8563-fix-output-clock-rate.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Philipp Zabel <p.zabel(a)pengutronix.de> Date: Tue, 7 Nov 2017 13:12:17 +0100 Subject: rtc: pcf8563: fix output clock rate From: Philipp Zabel <p.zabel(a)pengutronix.de> [ Upstream commit a3350f9c57ffad569c40f7320b89da1f3061c5bb ] The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by: Philipp Zabel <p.zabel(a)pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-pcf8563.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -422,7 +422,7 @@ static unsigned long pcf8563_clkout_reca return 0; buf &= PCF8563_REG_CLKO_F_MASK; - return clkout_rates[ret]; + return clkout_rates[buf]; } static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate, Patches currently in stable-queue which might be from p.zabel(a)pengutronix.de are queue-4.14/rtc-pcf8563-fix-output-clock-rate.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "rpmsg: glink: Initialize the "intent_req_comp" completion variable" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rpmsg: glink: Initialize the "intent_req_comp" completion variable to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rpmsg-glink-initialize-the-intent_req_comp-completion-variable.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Arun Kumar Neelakantam <aneela(a)codeaurora.org> Date: Mon, 30 Oct 2017 11:11:24 +0530 Subject: rpmsg: glink: Initialize the "intent_req_comp" completion variable From: Arun Kumar Neelakantam <aneela(a)codeaurora.org> [ Upstream commit 2394facb17bcace4b3c19b50202177a5d8903b64 ] The "intent_req_comp" variable is used without initialization which results in NULL pointer dereference in qcom_glink_request_intent(). we need to initialize the completion variable before using it. Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable") Signed-off-by: Arun Kumar Neelakantam <aneela(a)codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rpmsg/qcom_glink_native.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/rpmsg/qcom_glink_native.c +++ b/drivers/rpmsg/qcom_glink_native.c @@ -227,6 +227,7 @@ static struct glink_channel *qcom_glink_ init_completion(&channel->open_req); init_completion(&channel->open_ack); + init_completion(&channel->intent_req_comp); INIT_LIST_HEAD(&channel->done_intents); INIT_WORK(&channel->intent_work, qcom_glink_rx_done_work); Patches currently in stable-queue which might be from aneela(a)codeaurora.org are queue-4.14/rpmsg-glink-initialize-the-intent_req_comp-completion-variable.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "RDMA/cxgb4: Declare stag as __be32" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/cxgb4: Declare stag as __be32 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-cxgb4-declare-stag-as-__be32.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Leon Romanovsky <leon(a)kernel.org> Date: Wed, 25 Oct 2017 07:41:11 +0300 Subject: RDMA/cxgb4: Declare stag as __be32 From: Leon Romanovsky <leon(a)kernel.org> [ Upstream commit 35fb2a88ed4b77356fa679a8525c869a3594e287 ] The scqe.stag is actually __b32, fix it. drivers/infiniband/hw/cxgb4/cq.c:754:52: warning: cast to restricted __be32 Cc: Steve Wise <swise(a)opengridcomputing.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Reviewed-by: Steve Wise <swise(a)opengridcomputing.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/cxgb4/t4.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/hw/cxgb4/t4.h +++ b/drivers/infiniband/hw/cxgb4/t4.h @@ -171,7 +171,7 @@ struct t4_cqe { __be32 msn; } rcqe; struct { - u32 stag; + __be32 stag; u16 nada2; u16 cidx; } scqe; Patches currently in stable-queue which might be from leon(a)kernel.org are queue-4.14/ib-core-don-t-enforce-pkey-security-on-smi-mads.patch queue-4.14/ib-core-bound-check-alternate-path-port-number.patch queue-4.14/ib-core-fix-calculation-of-maximum-roce-mtu.patch queue-4.14/ib-core-fix-use-workqueue-without-wq_mem_reclaim.patch queue-4.14/ib-mlx4-fix-rss-s-qpc-attributes-assignments.patch queue-4.14/rdma-cxgb4-declare-stag-as-__be32.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "RDMA/cma: Avoid triggering undefined behavior" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/cma: Avoid triggering undefined behavior to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-cma-avoid-triggering-undefined-behavior.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Bart Van Assche <bart.vanassche(a)wdc.com> Date: Wed, 11 Oct 2017 10:48:45 -0700 Subject: RDMA/cma: Avoid triggering undefined behavior From: Bart Van Assche <bart.vanassche(a)wdc.com> [ Upstream commit c0b64f58e8d49570aa9ee55d880f92c20ff0166b ] According to the C standard the behavior of computations with integer operands is as follows: * A computation involving unsigned operands can never overflow, because a result that cannot be represented by the resulting unsigned integer type is reduced modulo the number that is one greater than the largest value that can be represented by the resulting type. * The behavior for signed integer underflow and overflow is undefined. Hence only use unsigned integers when checking for integer overflow. This patch is what I came up with after having analyzed the following smatch warnings: drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len' drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len' Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Acked-by: Sean Hefty <sean.hefty(a)intel.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/core/cma.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1540,7 +1540,7 @@ static struct rdma_id_private *cma_id_fr return id_priv; } -static inline int cma_user_data_offset(struct rdma_id_private *id_priv) +static inline u8 cma_user_data_offset(struct rdma_id_private *id_priv) { return cma_family(id_priv) == AF_IB ? 0 : sizeof(struct cma_hdr); } @@ -1942,7 +1942,8 @@ static int cma_req_handler(struct ib_cm_ struct rdma_id_private *listen_id, *conn_id = NULL; struct rdma_cm_event event; struct net_device *net_dev; - int offset, ret; + u8 offset; + int ret; listen_id = cma_id_from_event(cm_id, ib_event, &net_dev); if (IS_ERR(listen_id)) @@ -3440,7 +3441,8 @@ static int cma_resolve_ib_udp(struct rdm struct ib_cm_sidr_req_param req; struct ib_cm_id *id; void *private_data; - int offset, ret; + u8 offset; + int ret; memset(&req, 0, sizeof req); offset = cma_user_data_offset(id_priv); @@ -3497,7 +3499,8 @@ static int cma_connect_ib(struct rdma_id struct rdma_route *route; void *private_data; struct ib_cm_id *id; - int offset, ret; + u8 offset; + int ret; memset(&req, 0, sizeof req); offset = cma_user_data_offset(id_priv); Patches currently in stable-queue which might be from bart.vanassche(a)wdc.com are queue-4.14/ib-core-fix-endianness-annotation-in-rdma_is_multicast_addr.patch queue-4.14/target-iscsi-detect-conn_cmd_list-corruption-early.patch queue-4.14/target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch queue-4.14/rdma-cma-avoid-triggering-undefined-behavior.patch queue-4.14/scsi-core-fix-a-scsi_show_rq-null-pointer-dereference.patch queue-4.14/blk-mq-sched-dispatch-from-scheduler-iff-progress-is-made-in-dispatch.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "raid5: Set R5_Expanded on parity devices as well as data." has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled raid5: Set R5_Expanded on parity devices as well as data. to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: raid5-set-r5_expanded-on-parity-devices-as-well-as-data.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: NeilBrown <neilb(a)suse.com> Date: Tue, 17 Oct 2017 16:18:36 +1100 Subject: raid5: Set R5_Expanded on parity devices as well as data. From: NeilBrown <neilb(a)suse.com> [ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ] When reshaping a fully degraded raid5/raid6 to a larger nubmer of devices, the new device(s) are not in-sync and so that can make the newly grown stripe appear to be "failed". To avoid this, we set the R5_Expanded flag to say "Even though this device is not fully in-sync, this block is safe so don't treat the device as failed for this stripe". This flag is set for data devices, not not for parity devices. Consequently, if you have a RAID6 with two devices that are partly recovered and a spare, and start a reshape to include the spare, then when the reshape gets past the point where the recovery was up to, it will think the stripes are failed and will get into an infinite loop, failing to make progress. So when contructing parity on an EXPAND_READY stripe, set R5_Expanded. Reported-by: Curt <lightspd(a)gmail.com> Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/raid5.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1818,8 +1818,11 @@ static void ops_complete_reconstruct(voi struct r5dev *dev = &sh->dev[i]; if (dev->written || i == pd_idx || i == qd_idx) { - if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) + if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) { set_bit(R5_UPTODATE, &dev->flags); + if (test_bit(STRIPE_EXPAND_READY, &sh->state)) + set_bit(R5_Expanded, &dev->flags); + } if (fua) set_bit(R5_WantFUA, &dev->flags); if (sync) Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.14/autofs-fix-careless-error-in-recent-commit.patch queue-4.14/raid5-set-r5_expanded-on-parity-devices-as-well-as-data.patch queue-4.14/kernel-make-groups_sort-calling-a-responsibility-group_info-allocators.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "raid5-ppl: check recovery_offset when performing ppl recovery" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled raid5-ppl: check recovery_offset when performing ppl recovery to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: raid5-ppl-check-recovery_offset-when-performing-ppl-recovery.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Artur Paszkiewicz <artur.paszkiewicz(a)intel.com> Date: Fri, 29 Sep 2017 22:54:19 +0200 Subject: raid5-ppl: check recovery_offset when performing ppl recovery From: Artur Paszkiewicz <artur.paszkiewicz(a)intel.com> [ Upstream commit 07719ff767dcd8cc42050f185d332052f3816546 ] If starting an array that is undergoing rebuild, make ppl recovery honor the recovery_offset of a member disk and don't read data that is not yet in-sync. Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz(a)intel.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/raid5-ppl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/md/raid5-ppl.c +++ b/drivers/md/raid5-ppl.c @@ -758,7 +758,8 @@ static int ppl_recover_entry(struct ppl_ (unsigned long long)sector); rdev = conf->disks[dd_idx].rdev; - if (!rdev) { + if (!rdev || (!test_bit(In_sync, &rdev->flags) && + sector >= rdev->recovery_offset)) { pr_debug("%s:%*s data member disk %d missing\n", __func__, indent, "", dd_idx); update_parity = false; Patches currently in stable-queue which might be from artur.paszkiewicz(a)intel.com are queue-4.14/raid5-ppl-check-recovery_offset-when-performing-ppl-recovery.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "qtnfmac: modify full Tx queue error reporting" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qtnfmac: modify full Tx queue error reporting to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qtnfmac-modify-full-tx-queue-error-reporting.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Sergey Matyukevich <sergey.matyukevich.os(a)quantenna.com> Date: Mon, 30 Oct 2017 13:13:46 +0300 Subject: qtnfmac: modify full Tx queue error reporting From: Sergey Matyukevich <sergey.matyukevich.os(a)quantenna.com> [ Upstream commit e9931f984dd1e80adb3b5e095ef175fe383bc92d ] Under heavy load it is normal that h/w Tx queue is almost full all the time and reclaim should be done before transmitting next packet. Warning still should be reported as well as s/w Tx queues should be stopped in the case when reclaim failed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os(a)quantenna.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/quantenna/qtnfmac/pearl/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/wireless/quantenna/qtnfmac/pearl/pcie.c +++ b/drivers/net/wireless/quantenna/qtnfmac/pearl/pcie.c @@ -643,11 +643,11 @@ static int qtnf_tx_queue_ready(struct qt { if (!CIRC_SPACE(priv->tx_bd_w_index, priv->tx_bd_r_index, priv->tx_bd_num)) { - pr_err_ratelimited("reclaim full Tx queue\n"); qtnf_pcie_data_tx_reclaim(priv); if (!CIRC_SPACE(priv->tx_bd_w_index, priv->tx_bd_r_index, priv->tx_bd_num)) { + pr_warn_ratelimited("reclaim full Tx queue\n"); priv->tx_full_count++; return 0; } Patches currently in stable-queue which might be from sergey.matyukevich.os(a)quantenna.com are queue-4.14/qtnfmac-modify-full-tx-queue-error-reporting.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ppp: Destroy the mutex when cleanup" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ppp: Destroy the mutex when cleanup to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ppp-destroy-the-mutex-when-cleanup.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Gao Feng <gfree.wind(a)vip.163.com> Date: Tue, 31 Oct 2017 18:25:37 +0800 Subject: ppp: Destroy the mutex when cleanup From: Gao Feng <gfree.wind(a)vip.163.com> [ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ] The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the good readbility, it's better to invoke it in exit func when the init func invokes mutex_init. Signed-off-by: Gao Feng <gfree.wind(a)vip.163.com> Acked-by: Guillaume Nault <g.nault(a)alphalink.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ppp/ppp_generic.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -959,6 +959,7 @@ static __net_exit void ppp_exit_net(stru unregister_netdevice_many(&list); rtnl_unlock(); + mutex_destroy(&pn->all_ppp_mutex); idr_destroy(&pn->units_idr); } Patches currently in stable-queue which might be from gfree.wind(a)vip.163.com are queue-4.14/ppp-destroy-the-mutex-when-cleanup.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/xmon: Check before calling xive functions" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/xmon: Check before calling xive functions to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-xmon-check-before-calling-xive-functions.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Breno Leitao <leitao(a)debian.org> Date: Tue, 17 Oct 2017 16:20:18 -0200 Subject: powerpc/xmon: Check before calling xive functions From: Breno Leitao <leitao(a)debian.org> [ Upstream commit 402e172a2ce76210f2fe921cf419d12103851344 ] Currently xmon could call XIVE functions from OPAL even if the XIVE is disabled or does not exist in the system, as in POWER8 machines. This causes the following exception: 1:mon> dx cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450] pc: c00000000009cfa4: opal_xive_dump+0x50/0x68 lr: c0000000000997b8: opal_return+0x0/0x50 This patch simply checks if XIVE is enabled before calling XIVE functions. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Suggested-by: Guilherme G. Piccoli <gpiccoli(a)linux.vnet.ibm.com> Signed-off-by: Breno Leitao <leitao(a)debian.org> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/xmon/xmon.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2475,6 +2475,11 @@ static void dump_xives(void) unsigned long num; int c; + if (!xive_enabled()) { + printf("Xive disabled on this system\n"); + return; + } + c = inchar(); if (c == 'a') { dump_all_xives(); Patches currently in stable-queue which might be from leitao(a)debian.org are queue-4.14/powerpc-xmon-check-before-calling-xive-functions.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/pseries/vio: Dispose of virq mapping on vdevice unregister" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/pseries/vio: Dispose of virq mapping on vdevice unregister to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-pseries-vio-dispose-of-virq-mapping-on-vdevice-unregister.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Tyrel Datwyler <tyreld(a)linux.vnet.ibm.com> Date: Thu, 28 Sep 2017 20:19:20 -0400 Subject: powerpc/pseries/vio: Dispose of virq mapping on vdevice unregister From: Tyrel Datwyler <tyreld(a)linux.vnet.ibm.com> [ Upstream commit b8f89fea599d91e674497aad572613eb63181f31 ] When a vdevice is DLPAR removed from the system the vio subsystem doesn't bother unmapping the virq from the irq_domain. As a result we have a virq mapped to a hardware irq that is no longer valid for the irq_domain. A side effect is that we are left with /proc/irq/<irq#> affinity entries, and attempts to modify the smp_affinity of the irq will fail. In the following observed example the kernel log is spammed by ics_rtas_set_affinity errors after the removal of a VSCSI adapter. This is a result of irqbalance trying to adjust the affinity every 10 seconds. rpadlpar_io: slot U8408.E8E.10A7ACV-V5-C25 removed ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3 ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3 This patch fixes the issue by calling irq_dispose_mapping() on the virq of the viodev on unregister. Fixes: f2ab6219969f ("powerpc/pseries: Add PFO support to the VIO bus") Signed-off-by: Tyrel Datwyler <tyreld(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/pseries/vio.c | 2 ++ 1 file changed, 2 insertions(+) --- a/arch/powerpc/platforms/pseries/vio.c +++ b/arch/powerpc/platforms/pseries/vio.c @@ -1592,6 +1592,8 @@ ATTRIBUTE_GROUPS(vio_dev); void vio_unregister_device(struct vio_dev *viodev) { device_unregister(&viodev->dev); + if (viodev->family == VDEVICE) + irq_dispose_mapping(viodev->irq); } EXPORT_SYMBOL(vio_unregister_device); Patches currently in stable-queue which might be from tyreld(a)linux.vnet.ibm.com are queue-4.14/powerpc-pseries-vio-dispose-of-virq-mapping-on-vdevice-unregister.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Shriya <shriyak(a)linux.vnet.ibm.com> Date: Fri, 13 Oct 2017 10:06:41 +0530 Subject: powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo From: Shriya <shriyak(a)linux.vnet.ibm.com> [ Upstream commit cd77b5ce208c153260ed7882d8910f2395bfaabd ] The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which returns the last frequency requested by the kernel, but may not reflect the actual frequency the processor is running at. This patch makes a call to cpufreq_get() instead which returns the current frequency reported by the hardware. Fixes: fb5153d05a7d ("powerpc: powernv: Implement ppc_md.get_proc_freq()") Signed-off-by: Shriya <shriyak(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/powernv/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -319,7 +319,7 @@ static unsigned long pnv_get_proc_freq(u { unsigned long ret_freq; - ret_freq = cpufreq_quick_get(cpu) * 1000ul; + ret_freq = cpufreq_get(cpu) * 1000ul; /* * If the backend cpufreq driver does not exist, Patches currently in stable-queue which might be from shriyak(a)linux.vnet.ibm.com are queue-4.14/powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/perf/hv-24x7: Fix incorrect comparison in memord" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/perf/hv-24x7: Fix incorrect comparison in memord to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-perf-hv-24x7-fix-incorrect-comparison-in-memord.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Mon, 9 Oct 2017 21:52:44 +1100 Subject: powerpc/perf/hv-24x7: Fix incorrect comparison in memord From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit 05c14c03138532a3cb2aa29c2960445c8753343b ] In the hv-24x7 code there is a function memord() which tries to implement a sort function return -1, 0, 1. However one of the conditions is incorrect, such that it can never be true, because we will have already returned. I don't believe there is a bug in practice though, because the comparisons are an optimisation prior to calling memcmp(). Fix it by swapping the second comparision, so it can be true. Reported-by: David Binderman <dcb314(a)hotmail.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/perf/hv-24x7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -540,7 +540,7 @@ static int memord(const void *d1, size_t { if (s1 < s2) return 1; - if (s2 > s1) + if (s1 > s2) return -1; return memcmp(d1, d2, s1); Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.14/powerpc-xmon-check-before-calling-xive-functions.patch queue-4.14/powerpc-perf-hv-24x7-fix-incorrect-comparison-in-memord.patch queue-4.14/powerpc-powernv-cpufreq-fix-the-frequency-read-by-proc-cpuinfo.patch queue-4.14/powerpc-pseries-vio-dispose-of-virq-mapping-on-vdevice-unregister.patch queue-4.14/powerpc-ipic-fix-status-get-and-status-clear.patch queue-4.14/powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/opal: Fix EBUSY bug in acquiring tokens" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/opal: Fix EBUSY bug in acquiring tokens to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: "William A. Kennington III" <wak(a)google.com> Date: Fri, 22 Sep 2017 16:58:00 -0700 Subject: powerpc/opal: Fix EBUSY bug in acquiring tokens From: "William A. Kennington III" <wak(a)google.com> [ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ] The current code checks the completion map to look for the first token that is complete. In some cases, a completion can come in but the token can still be on lease to the caller processing the completion. If this completed but unreleased token is the first token found in the bitmap by another tasks trying to acquire a token, then the __test_and_set_bit call will fail since the token will still be on lease. The acquisition will then fail with an EBUSY. This patch reorganizes the acquisition code to look at the opal_async_token_map for an unleased token. If the token has no lease it must have no outstanding completions so we should never see an EBUSY, unless we have leased out too many tokens. Since opal_async_get_token_inrerruptible is protected by a semaphore, we will practically never see EBUSY anymore. Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion") Signed-off-by: William A. Kennington III <wak(a)google.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/powernv/opal-async.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/powerpc/platforms/powernv/opal-async.c +++ b/arch/powerpc/platforms/powernv/opal-async.c @@ -39,18 +39,18 @@ int __opal_async_get_token(void) int token; spin_lock_irqsave(&opal_async_comp_lock, flags); - token = find_first_bit(opal_async_complete_map, opal_max_async_tokens); + token = find_first_zero_bit(opal_async_token_map, opal_max_async_tokens); if (token >= opal_max_async_tokens) { token = -EBUSY; goto out; } - if (__test_and_set_bit(token, opal_async_token_map)) { + if (!__test_and_clear_bit(token, opal_async_complete_map)) { token = -EBUSY; goto out; } - __clear_bit(token, opal_async_complete_map); + __set_bit(token, opal_async_token_map); out: spin_unlock_irqrestore(&opal_async_comp_lock, flags); Patches currently in stable-queue which might be from wak(a)google.com are queue-4.14/powerpc-opal-fix-ebusy-bug-in-acquiring-tokens.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/ipic: Fix status get and status clear" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/ipic: Fix status get and status clear to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-ipic-fix-status-get-and-status-clear.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Christophe Leroy <christophe.leroy(a)c-s.fr> Date: Wed, 18 Oct 2017 11:16:47 +0200 Subject: powerpc/ipic: Fix status get and status clear From: Christophe Leroy <christophe.leroy(a)c-s.fr> [ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ] IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR which is the mask register. Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/sysdev/ipic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -846,12 +846,12 @@ void ipic_disable_mcp(enum ipic_mcp_irq u32 ipic_get_mcp_status(void) { - return ipic_read(primary_ipic->regs, IPIC_SERMR); + return ipic_read(primary_ipic->regs, IPIC_SERSR); } void ipic_clear_mcp_status(u32 mask) { - ipic_write(primary_ipic->regs, IPIC_SERMR, mask); + ipic_write(primary_ipic->regs, IPIC_SERSR, mask); } /* Return an interrupt vector or 0 if no interrupt is pending. */ Patches currently in stable-queue which might be from christophe.leroy(a)c-s.fr are queue-4.14/powerpc-ipic-fix-status-get-and-status-clear.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PM / s2idle: Clear the events_check_enabled flag" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PM / s2idle: Clear the events_check_enabled flag to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pm-s2idle-clear-the-events_check_enabled-flag.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Rajat Jain <rajatja(a)google.com> Date: Tue, 31 Oct 2017 14:44:24 -0700 Subject: PM / s2idle: Clear the events_check_enabled flag From: Rajat Jain <rajatja(a)google.com> [ Upstream commit 95b982b45122c57da2ee0b46cce70775e1d987af ] Problem: This flag does not get cleared currently in the suspend or resume path in the following cases: * In case some driver's suspend routine returns an error. * Successful s2idle case * etc? Why is this a problem: What happens is that the next suspend attempt could fail even though the user did not enable the flag by writing to /sys/power/wakeup_count. This is 1 use case how the issue can be seen (but similar use case with driver suspend failure can be thought of): 1. Read /sys/power/wakeup_count 2. echo count > /sys/power/wakeup_count 3. echo freeze > /sys/power/wakeup_count 4. Let the system suspend, and wakeup the system using some wake source that calls pm_wakeup_event() e.g. power button or something. 5. Note that the combined wakeup count would be incremented due to the pm_wakeup_event() in the resume path. 6. After resuming the events_check_enabled flag is still set. At this point if the user attempts to freeze again (without writing to /sys/power/wakeup_count), the suspend would fail even though there has been no wake event since the past resume. Address that by clearing the flag just before a resume is completed, so that it is always cleared for the corner cases mentioned above. Signed-off-by: Rajat Jain <rajatja(a)google.com> Acked-by: Pavel Machek <pavel(a)ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/power/suspend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -437,7 +437,6 @@ static int suspend_enter(suspend_state_t error = suspend_ops->enter(state); trace_suspend_resume(TPS("machine_suspend"), state, false); - events_check_enabled = false; } else if (*wakeup) { error = -EBUSY; } @@ -582,6 +581,7 @@ static int enter_state(suspend_state_t s pm_restore_gfp_mask(); Finish: + events_check_enabled = false; pm_pr_dbg("Finishing wakeup.\n"); suspend_finish(); Unlock: Patches currently in stable-queue which might be from rajatja(a)google.com are queue-4.14/pm-s2idle-clear-the-events_check_enabled-flag.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-sony-laptop-fix-error-handling-in-sony_nc_setup_rfkill.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Wed, 1 Nov 2017 18:42:45 +0100 Subject: platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill() From: Markus Elfring <elfring(a)users.sourceforge.net> [ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ] Source code review for a specific software refactoring showed the need for another correction because the error code "-1" was returned so far if a call of the function "sony_call_snc_handle" failed here. Thus assign the return value from these two function calls also to the variable "err" and provide it in case of a failure. Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw") Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Link: https://lkml.org/lkml/2017/10/31/463 Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg(a)mail.gmail.com> Signed-off-by: Markus Elfring <elfring(a)users.sourceforge.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/sony-laptop.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1660,17 +1660,19 @@ static int sony_nc_setup_rfkill(struct a if (!rfk) return -ENOMEM; - if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) { + err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result); + if (err < 0) { rfkill_destroy(rfk); - return -1; + return err; } hwblock = !(result & 0x1); - if (sony_call_snc_handle(sony_rfkill_handle, - sony_rfkill_address[nc_type], - &result) < 0) { + err = sony_call_snc_handle(sony_rfkill_handle, + sony_rfkill_address[nc_type], + &result); + if (err < 0) { rfkill_destroy(rfk); - return -1; + return err; } swblock = !(result & 0x2); Patches currently in stable-queue which might be from elfring(a)users.sourceforge.net are queue-4.14/platform-x86-sony-laptop-fix-error-handling-in-sony_nc_setup_rfkill.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: intel_punit_ipc: Fix resource ioremap warning" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: intel_punit_ipc: Fix resource ioremap warning to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-intel_punit_ipc-fix-resource-ioremap-warning.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> Date: Sun, 29 Oct 2017 02:49:54 -0700 Subject: platform/x86: intel_punit_ipc: Fix resource ioremap warning From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> [ Upstream commit 6cc8cbbc8868033f279b63e98b26b75eaa0006ab ] For PUNIT device, ISPDRIVER_IPC and GTDDRIVER_IPC resources are not mandatory. So when PMC IPC driver creates a PUNIT device, if these resources are not available then it creates dummy resource entries for these missing resources. But during PUNIT device probe, doing ioremap on these dummy resources generates following warning messages. intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] This patch fixes this issue by adding extra check for resource size before performing ioremap operation. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/intel_punit_ipc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -252,28 +252,28 @@ static int intel_punit_get_bars(struct p * - GTDRIVER_IPC BASE_IFACE */ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; } res = platform_get_resource(pdev, IORESOURCE_MEM, 3); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; } res = platform_get_resource(pdev, IORESOURCE_MEM, 4); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; } res = platform_get_resource(pdev, IORESOURCE_MEM, 5); - if (res) { + if (res && resource_size(res) > 1) { addr = devm_ioremap_resource(&pdev->dev, res); if (!IS_ERR(addr)) punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; Patches currently in stable-queue which might be from sathyanarayanan.kuppuswamy(a)linux.intel.com are queue-4.14/platform-x86-intel_punit_ipc-fix-resource-ioremap-warning.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "platform/x86: hp_accel: Add quirk for HP ProBook 440 G4" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: hp_accel: Add quirk for HP ProBook 440 G4 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-hp_accel-add-quirk-for-hp-probook-440-g4.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Osama Khan <osama.khan(a)ericsson.com> Date: Sat, 21 Oct 2017 10:42:21 +0000 Subject: platform/x86: hp_accel: Add quirk for HP ProBook 440 G4 From: Osama Khan <osama.khan(a)ericsson.com> [ Upstream commit 163ca80013aafb6dc9cb295de3db7aeab9ab43f8 ] Added support for HP ProBook 440 G4 laptops by including the accelerometer orientation quirk for that device. Testing was performed based on the axis orientation guidelines here: https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d which states "If the left side is elevated, X increases (becomes positive)". When tested, on lifting the left edge, x values became increasingly negative thus indicating an inverted x-axis on the installed lis3lv02d chip. This was compensated by adding an entry for this device in hp_accel.c specifying the quirk as x_inverted. The patch was tested on a ProBook 440 G4 device and x-axis as well as y and z-axis values are now generated as per spec. Signed-off-by: Osama Khan <osama.khan(a)ericsson.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/hp_accel.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left), AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd), + AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted), AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left), AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted), AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap), Patches currently in stable-queue which might be from osama.khan(a)ericsson.com are queue-4.14/platform-x86-hp_accel-add-quirk-for-hp-probook-440-g4.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "pinctrl: adi2: Fix Kconfig build problem" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pinctrl: adi2: Fix Kconfig build problem to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pinctrl-adi2-fix-kconfig-build-problem.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Linus Walleij <linus.walleij(a)linaro.org> Date: Wed, 11 Oct 2017 11:57:15 +0200 Subject: pinctrl: adi2: Fix Kconfig build problem From: Linus Walleij <linus.walleij(a)linaro.org> [ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ] The build robot is complaining on Blackfin: drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup': >> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing pointer to incomplete type 'struct gpio_port_t' writew(readw(&regs->port_fer) & ~BIT(offset), ^~ drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq': >> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing pointer to incomplete type 'struct bfin_pint_regs' if (readl(&regs->invert_set) & pintbit) ^~ It seems the driver need to include <asm/gpio.h> and <asm/irq.h> to compile. The Blackfin architecture was re-defining the Kconfig PINCTRL symbol which is not OK, so replaced this with PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2 just like most arches do. Further, the old GPIO driver symbol GPIO_ADI was possible to select at the same time as selecting PINCTRL. This was not working because the arch-local <asm/gpio.h> header contains an explicit #ifndef PINCTRL clause making compilation break if you combine them. The same is true for DEBUG_MMRS. Make sure the ADI2 pinctrl driver is not selected at the same time as the old GPIO implementation. (This should be converted to use gpiolib or pincontrol and move to drivers/...) Also make sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at the same time as the new PINCTRL implementation, and only make PINCTRL_ADI2 selectable for the Blackfin families that actually have it. This way it is still possible to add e.g. I2C-based pin control expanders on the Blackfin. Cc: Steven Miao <realmz6(a)gmail.com> Cc: Huanhuan Feng <huanhuan.feng(a)analog.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/blackfin/Kconfig | 7 +++++-- arch/blackfin/Kconfig.debug | 1 + drivers/pinctrl/Kconfig | 3 ++- 3 files changed, 8 insertions(+), 3 deletions(-) --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -321,11 +321,14 @@ config BF53x config GPIO_ADI def_bool y + depends on !PINCTRL depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561) -config PINCTRL +config PINCTRL_BLACKFIN_ADI2 def_bool y - depends on BF54x || BF60x + depends on (BF54x || BF60x) + select PINCTRL + select PINCTRL_ADI2 config MEM_MT48LC64M4A2FB_7E bool --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -18,6 +18,7 @@ config DEBUG_VERBOSE config DEBUG_MMRS tristate "Generate Blackfin MMR tree" + depends on !PINCTRL select DEBUG_FS help Create a tree of Blackfin MMRs via the debugfs tree. If --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -33,7 +33,8 @@ config DEBUG_PINCTRL config PINCTRL_ADI2 bool "ADI pin controller driver" - depends on BLACKFIN + depends on (BF54x || BF60x) + depends on !GPIO_ADI select PINMUX select IRQ_DOMAIN help Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are queue-4.14/pinctrl-adi2-fix-kconfig-build-problem.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI/PME: Handle invalid data when reading Root Status" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI/PME: Handle invalid data when reading Root Status to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-pme-handle-invalid-data-when-reading-root-status.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Qiang <zhengqiang10(a)huawei.com> Date: Thu, 28 Sep 2017 11:54:34 +0800 Subject: PCI/PME: Handle invalid data when reading Root Status From: Qiang <zhengqiang10(a)huawei.com> [ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ] PCIe PME and native hotplug share the same interrupt number, so hotplug interrupts are also processed by PME. In some cases, e.g., a Link Down interrupt, a device may be present but unreachable, so when we try to read its Root Status register, the read fails and we get all ones data (0xffffffff). Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e., "some device has asserted PME," so we scheduled pcie_pme_work_fn(). This caused an infinite loop because pcie_pme_work_fn() tried to handle PME requests until PCI_EXP_RTSTA_PME is cleared, but with the link down, PCI_EXP_RTSTA_PME can't be cleared. Check for the invalid 0xffffffff data everywhere we read the Root Status register. 1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from non-existent devices") added similar checks in the hotplug driver. Signed-off-by: Qiang Zheng <zhengqiang10(a)huawei.com> [bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow other similar checks] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/pcie/pme.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -226,6 +226,9 @@ static void pcie_pme_work_fn(struct work break; pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); + if (rtsta == (u32) ~0) + break; + if (rtsta & PCI_EXP_RTSTA_PME) { /* * Clear PME status of the port. If there are other @@ -273,7 +276,7 @@ static irqreturn_t pcie_pme_irq(int irq, spin_lock_irqsave(&data->lock, flags); pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); - if (!(rtsta & PCI_EXP_RTSTA_PME)) { + if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) { spin_unlock_irqrestore(&data->lock, flags); return IRQ_NONE; } Patches currently in stable-queue which might be from zhengqiang10(a)huawei.com are queue-4.14/pci-pme-handle-invalid-data-when-reading-root-status.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: Do not allocate more buses than available in parent" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: Do not allocate more buses than available in parent to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-do-not-allocate-more-buses-than-available-in-parent.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Mika Westerberg <mika.westerberg(a)linux.intel.com> Date: Fri, 13 Oct 2017 21:35:43 +0300 Subject: PCI: Do not allocate more buses than available in parent From: Mika Westerberg <mika.westerberg(a)linux.intel.com> [ Upstream commit a20c7f36bd3d20d245616ae223bb9d05dfb6f050 ] One can ask more buses to be reserved for hotplug bridges by passing pci=hpbussize=N in the kernel command line. If the parent bus does not have enough bus space available we incorrectly create child bus with the requested number of subordinate buses. In the example below hpbussize is set to one more than we have available buses in the root port: pci 0000:07:00.0: [8086:1578] type 01 class 0x060400 pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:07:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:08: busn_res: can not insert [bus 08-ff] under [bus 07-3f] (conflicts with (null) [bus 07-3f]) pci_bus 0000:08: scanning bus ... pci_bus 0000:0a: bus scan returning with max=40 pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 40 pci_bus 0000:0a: [bus 0a-40] partially hidden behind bridge 0000:07 [bus 07-3f] pci_bus 0000:08: bus scan returning with max=40 pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 40 Instead of allowing this, limit the subordinate number to be less than or equal the maximum subordinate number allocated for the parent bus (if it has any). Signed-off-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> [bhelgaas: remove irrelevant dmesg messages] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/probe.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1076,7 +1076,8 @@ int pci_scan_bridge(struct pci_bus *bus, child = pci_add_new_bus(bus, dev, max+1); if (!child) goto out; - pci_bus_insert_busn_res(child, max+1, 0xff); + pci_bus_insert_busn_res(child, max+1, + bus->busn_res.end); } max++; buses = (buses & 0xff000000) @@ -2433,6 +2434,10 @@ unsigned int pci_scan_child_bus(struct p if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) { if (max - bus->busn_res.start < pci_hotplug_bus_size - 1) max = bus->busn_res.start + pci_hotplug_bus_size - 1; + + /* Do not allocate more buses than we have room left */ + if (max > bus->busn_res.end) + max = bus->busn_res.end; } /* Patches currently in stable-queue which might be from mika.westerberg(a)linux.intel.com are queue-4.14/thunderbolt-tb-fix-use-after-free-in-tb_activate_pcie_devices.patch queue-4.14/pci-do-not-allocate-more-buses-than-available-in-parent.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: Detach driver before procfs & sysfs teardown on device remove" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: Detach driver before procfs & sysfs teardown on device remove to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-detach-driver-before-procfs-sysfs-teardown-on-device-remove.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Alex Williamson <alex.williamson(a)redhat.com> Date: Wed, 11 Oct 2017 15:35:56 -0600 Subject: PCI: Detach driver before procfs & sysfs teardown on device remove From: Alex Williamson <alex.williamson(a)redhat.com> [ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ] When removing a device, for example a VF being removed due to SR-IOV teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual hot-unplug, we first remove the procfs and sysfs attributes for the device before attempting to release the device from any driver bound to it. Unbinding the driver from the device can take time. The device might need to write out data or it might be actively in use. If it's in use by userspace through a vfio driver, the unbind might block until the user releases the device. This leads to a potentially non-trivial amount of time where the device exists, but we've torn down the interfaces that userspace uses to examine devices, for instance lspci might generate this sort of error: pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config lspci: Unable to read the standard configuration space header of device 0000:01:0a.3 We don't seem to have any dependence on this teardown ordering in the kernel, so let's unbind the driver first, which is also more symmetric with the instantiation of the device in pci_bus_add_device(). Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/remove.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -19,9 +19,9 @@ static void pci_stop_dev(struct pci_dev pci_pme_active(dev, false); if (dev->is_added) { + device_release_driver(&dev->dev); pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); - device_release_driver(&dev->dev); dev->is_added = 0; } Patches currently in stable-queue which might be from alex.williamson(a)redhat.com are queue-4.14/pci-detach-driver-before-procfs-sysfs-teardown-on-device-remove.patch queue-4.14/iommu-amd-limit-the-iova-page-range-to-the-specified-addresses.patch queue-4.14/iommu-mediatek-fix-driver-name.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "nvme: use kref_get_unless_zero in nvme_find_get_ns" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvme: use kref_get_unless_zero in nvme_find_get_ns to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Christoph Hellwig <hch(a)lst.de> Date: Wed, 18 Oct 2017 13:20:01 +0200 Subject: nvme: use kref_get_unless_zero in nvme_find_get_ns From: Christoph Hellwig <hch(a)lst.de> [ Upstream commit 2dd4122854f697afc777582d18548dded03ce5dd ] For kref_get_unless_zero to protect against lookup vs free races we need to use it in all places where we aren't guaranteed to already hold a reference. There is no such guarantee in nvme_find_get_ns, so switch to kref_get_unless_zero in this function. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Sagi Grimberg <sagi(a)grimberg.me> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/host/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2299,7 +2299,8 @@ static struct nvme_ns *nvme_find_get_ns( mutex_lock(&ctrl->namespaces_mutex); list_for_each_entry(ns, &ctrl->namespaces, list) { if (ns->ns_id == nsid) { - kref_get(&ns->kref); + if (!kref_get_unless_zero(&ns->kref)) + continue; ret = ns; break; } Patches currently in stable-queue which might be from hch(a)lst.de are queue-4.14/xfs-fix-incorrect-extent-state-in-xfs_bmap_add_extent_unwritten_real.patch queue-4.14/nvme-use-kref_get_unless_zero-in-nvme_find_get_ns.patch queue-4.14/target-iscsi-detect-conn_cmd_list-corruption-early.patch queue-4.14/target-iscsi-fix-a-race-condition-in-iscsit_add_reject_from_cmd.patch queue-4.14/scsi-core-fix-a-scsi_show_rq-null-pointer-dereference.patch queue-4.14/scsi-libsas-fix-length-error-in-sas_smp_handler.patch queue-4.14/blk-mq-sched-dispatch-from-scheduler-iff-progress-is-made-in-dispatch.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "nullb: fix error return code in null_init()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nullb: fix error return code in null_init() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nullb-fix-error-return-code-in-null_init.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Wei Yongjun <weiyongjun1(a)huawei.com> Date: Tue, 17 Oct 2017 12:11:46 +0000 Subject: nullb: fix error return code in null_init() From: Wei Yongjun <weiyongjun1(a)huawei.com> [ Upstream commit 30c516d750396c5f3ec9cb04c9e025c25e91495e ] Fix to return error code -ENOMEM from the null_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 2984c8684f96 ("nullb: factor disk parameters") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/null_blk.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/block/null_blk.c +++ b/drivers/block/null_blk.c @@ -1985,8 +1985,10 @@ static int __init null_init(void) for (i = 0; i < nr_devices; i++) { dev = null_alloc_dev(); - if (!dev) + if (!dev) { + ret = -ENOMEM; goto err_dev; + } ret = null_add_dev(dev); if (ret) { null_free_dev(dev); Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are queue-4.14/nullb-fix-error-return-code-in-null_init.patch queue-4.14/mlxsw-spectrum-fix-error-return-code-in-mlxsw_sp_port_create.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "netfilter: ipvs: Fix inappropriate output of procfs" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: ipvs: Fix inappropriate output of procfs to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-ipvs-fix-inappropriate-output-of-procfs.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: KUWAZAWA Takuya <albatross0(a)gmail.com> Date: Sun, 15 Oct 2017 20:54:10 +0900 Subject: netfilter: ipvs: Fix inappropriate output of procfs From: KUWAZAWA Takuya <albatross0(a)gmail.com> [ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ] Information about ipvs in different network namespace can be seen via procfs. How to reproduce: # ip netns add ns01 # ip netns add ns02 # ip netns exec ns01 ip a add dev lo 127.0.0.1/8 # ip netns exec ns02 ip a add dev lo 127.0.0.1/8 # ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80 # ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80 The ipvsadm displays information about its own network namespace only. # ip netns exec ns01 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.1:80 wlc # ip netns exec ns02 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.2:80 wlc But I can see information about other network namespace via procfs. # ip netns exec ns01 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010101:0050 wlc TCP 0A010102:0050 wlc # ip netns exec ns02 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010102:0050 wlc Signed-off-by: KUWAZAWA Takuya <albatross0(a)gmail.com> Acked-by: Julian Anastasov <ja(a)ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netfilter/ipvs/ip_vs_ctl.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2034,12 +2034,16 @@ static int ip_vs_info_seq_show(struct se seq_puts(seq, " -> RemoteAddress:Port Forward Weight ActiveConn InActConn\n"); } else { + struct net *net = seq_file_net(seq); + struct netns_ipvs *ipvs = net_ipvs(net); const struct ip_vs_service *svc = v; const struct ip_vs_iter *iter = seq->private; const struct ip_vs_dest *dest; struct ip_vs_scheduler *sched = rcu_dereference(svc->scheduler); char *sched_name = sched ? sched->name : "none"; + if (svc->ipvs != ipvs) + return 0; if (iter->table == ip_vs_svc_table) { #ifdef CONFIG_IP_VS_IPV6 if (svc->af == AF_INET6) Patches currently in stable-queue which might be from albatross0(a)gmail.com are queue-4.14/netfilter-ipvs-fix-inappropriate-output-of-procfs.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: fix the TX/RX ring.queue_index in hns3_ring_get_cfg" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix the TX/RX ring.queue_index in hns3_ring_get_cfg to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Lipeng <lipeng321(a)huawei.com> Date: Mon, 23 Oct 2017 19:51:05 +0800 Subject: net: hns3: fix the TX/RX ring.queue_index in hns3_ring_get_cfg From: Lipeng <lipeng321(a)huawei.com> [ Upstream commit 66b447301ac710ee237dba8b653244018fbb6168 ] The interface hns3_ring_get_cfg only update TX ring queue_index, but do not update RX ring queue_index. This patch fixes it. Fixes: 76ad4f0 (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC) Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -2488,16 +2488,16 @@ static int hns3_ring_get_cfg(struct hnae if (ring_type == HNAE3_RING_TYPE_TX) { ring_data[q->tqp_index].ring = ring; + ring_data[q->tqp_index].queue_index = q->tqp_index; ring->io_base = (u8 __iomem *)q->io_base + HNS3_TX_REG_OFFSET; } else { ring_data[q->tqp_index + queue_num].ring = ring; + ring_data[q->tqp_index + queue_num].queue_index = q->tqp_index; ring->io_base = q->io_base; } hnae_set_bit(ring->flag, HNAE3_RING_TYPE_B, ring_type); - ring_data[q->tqp_index].queue_index = q->tqp_index; - ring->tqp = q; ring->desc = NULL; ring->desc_cb = NULL; Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.14/net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch queue-4.14/net-hns3-fix-the-bug-when-map-buffer-fail.patch queue-4.14/net-hns3-fix-a-bug-when-alloc-new-buffer.patch queue-4.14/net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch queue-4.14/net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch queue-4.14/net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: fix the bug when map buffer fail" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix the bug when map buffer fail to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-the-bug-when-map-buffer-fail.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Lipeng <lipeng321(a)huawei.com> Date: Mon, 23 Oct 2017 19:51:02 +0800 Subject: net: hns3: fix the bug when map buffer fail From: Lipeng <lipeng321(a)huawei.com> [ Upstream commit 564883bb4dc1a4f3cba6344e77743175694b0761 ] If one buffer had been recieved to stack, driver will alloc a new buffer, map the buffer to device and replace the old buffer. When map fail, should only free the new alloced buffer, but not free all buffers in the ring. Fixes: 76ad4f0 (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC) Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -1546,7 +1546,7 @@ static int hns3_reserve_buffer_map(struc return 0; out_with_buf: - hns3_free_buffers(ring); + hns3_free_buffer(ring, cb); out: return ret; } Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.14/net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch queue-4.14/net-hns3-fix-the-bug-when-map-buffer-fail.patch queue-4.14/net-hns3-fix-a-bug-when-alloc-new-buffer.patch queue-4.14/net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch queue-4.14/net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch queue-4.14/net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: fix the bug of hns3_set_txbd_baseinfo" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix the bug of hns3_set_txbd_baseinfo to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Lipeng <lipeng321(a)huawei.com> Date: Tue, 24 Oct 2017 21:02:09 +0800 Subject: net: hns3: fix the bug of hns3_set_txbd_baseinfo From: Lipeng <lipeng321(a)huawei.com> [ Upstream commit 7036d26f328f12a323069eb16d965055b4cb3795 ] The SC bits of TX BD mean switch control. For this area, value 0 indicates no switch control, the packet is routed according to the forwarding table. Value 1 indicates that the packet is transmitted to the network bypassing the forwarding table. As HNS3 driver need support VF later, VF conmunicate with its own PF need forwarding table. This patch sets SC bits of TX BD 0 and use forwarding table. Fixes: 76ad4f0 (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC) Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -721,7 +721,7 @@ static void hns3_set_txbd_baseinfo(u16 * HNS3_TXD_BDTYPE_M, 0); hnae_set_bit(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_FE_B, !!frag_end); hnae_set_bit(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_VLD_B, 1); - hnae_set_field(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_SC_M, HNS3_TXD_SC_S, 1); + hnae_set_field(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_SC_M, HNS3_TXD_SC_S, 0); } static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv, Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.14/net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch queue-4.14/net-hns3-fix-the-bug-when-map-buffer-fail.patch queue-4.14/net-hns3-fix-a-bug-when-alloc-new-buffer.patch queue-4.14/net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch queue-4.14/net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch queue-4.14/net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: fix for getting advertised_caps in hns3_get_link_ksettings" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix for getting advertised_caps in hns3_get_link_ksettings to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Fuyun Liang <liangfuyun1(a)huawei.com> Date: Fri, 3 Nov 2017 12:18:26 +0800 Subject: net: hns3: fix for getting advertised_caps in hns3_get_link_ksettings From: Fuyun Liang <liangfuyun1(a)huawei.com> [ Upstream commit 2b39cabb2a283cea0c3d96d9370575371726164f ] This patch fixes a bug for ethtool's get_link_ksettings(). The advertising for autoneg is always added to advertised_caps whether autoneg is enable or disable. This patch fixes it. Fixes: 496d03e (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by: Fuyun Liang <liangfuyun1(a)huawei.com> Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c @@ -375,6 +375,9 @@ static int hns3_get_link_ksettings(struc break; } + if (!cmd->base.autoneg) + advertised_caps &= ~HNS3_LM_AUTONEG_BIT; + /* now, map driver link modes to ethtool link modes */ hns3_driv_to_eth_caps(supported_caps, cmd, false); hns3_driv_to_eth_caps(advertised_caps, cmd, true); Patches currently in stable-queue which might be from liangfuyun1(a)huawei.com are queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: Fix a misuse to devm_free_irq" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: Fix a misuse to devm_free_irq to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-a-misuse-to-devm_free_irq.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: qumingguang <qumingguang(a)huawei.com> Date: Thu, 2 Nov 2017 20:45:22 +0800 Subject: net: hns3: Fix a misuse to devm_free_irq From: qumingguang <qumingguang(a)huawei.com> [ Upstream commit ae064e6123f89f90af7e4ea190cc0c612643ca93 ] we should use free_irq to free the nic irq during the unloading time. because we use request_irq to apply it when nic up. It will crash if up net device after reset the port. This patch fixes the issue. Signed-off-by: qumingguang <qumingguang(a)huawei.com> Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -2460,9 +2460,8 @@ static int hns3_nic_uninit_vector_data(s (void)irq_set_affinity_hint( priv->tqp_vector[i].vector_irq, NULL); - devm_free_irq(&pdev->dev, - priv->tqp_vector[i].vector_irq, - &priv->tqp_vector[i]); + free_irq(priv->tqp_vector[i].vector_irq, + &priv->tqp_vector[i]); } priv->ring_data[i].ring->irq_init_flag = HNS3_VECTOR_NOT_INITED; Patches currently in stable-queue which might be from qumingguang(a)huawei.com are queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: fix a bug when alloc new buffer" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix a bug when alloc new buffer to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-a-bug-when-alloc-new-buffer.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Lipeng <lipeng321(a)huawei.com> Date: Mon, 23 Oct 2017 19:51:01 +0800 Subject: net: hns3: fix a bug when alloc new buffer From: Lipeng <lipeng321(a)huawei.com> [ Upstream commit b9077428ec5569aacb2952d8a2ffb51c8988d3c2 ] When alloce new buffer to HW, should unmap the old buffer first. This old code map the old buffer but not unmap the old buffer, this patch fixes it. Fixes: 76ad4f0 (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC) Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -1586,7 +1586,7 @@ out_buffer_fail: static void hns3_replace_buffer(struct hns3_enet_ring *ring, int i, struct hns3_desc_cb *res_cb) { - hns3_map_buffer(ring, &ring->desc_cb[i]); + hns3_unmap_buffer(ring, &ring->desc_cb[i]); ring->desc_cb[i] = *res_cb; ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma); } Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.14/net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch queue-4.14/net-hns3-fix-the-bug-when-map-buffer-fail.patch queue-4.14/net-hns3-fix-a-bug-when-alloc-new-buffer.patch queue-4.14/net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch queue-4.14/net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch queue-4.14/net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: fix a bug in hclge_uninit_client_instance" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix a bug in hclge_uninit_client_instance to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Lipeng <lipeng321(a)huawei.com> Date: Tue, 24 Oct 2017 21:02:11 +0800 Subject: net: hns3: fix a bug in hclge_uninit_client_instance From: Lipeng <lipeng321(a)huawei.com> [ Upstream commit a17dcf3f0124698d1120da71574bf4c339e5a368 ] HNS3 driver initialize hdev->roce_client and vport->roce.client in hclge_init_client_instance, and need set hdev->roce_client and vport->roce.client NULL. If do not set them NULL when uninit, it will fail in the scene: insmod hns3.ko, hns-roce.ko, hns-roce-hw-v3.ko successfully, but rmmod hns3.ko after rmmod hns-roce-hw-v2.ko and hns-roce.ko. This patch fixes the issue. Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -4007,13 +4007,19 @@ static void hclge_uninit_client_instance for (i = 0; i < hdev->num_vmdq_vport + 1; i++) { vport = &hdev->vport[i]; - if (hdev->roce_client) + if (hdev->roce_client) { hdev->roce_client->ops->uninit_instance(&vport->roce, 0); + hdev->roce_client = NULL; + vport->roce.client = NULL; + } if (client->type == HNAE3_CLIENT_ROCE) return; - if (client->ops->uninit_instance) + if (client->ops->uninit_instance) { client->ops->uninit_instance(&vport->nic, 0); + hdev->nic_client = NULL; + vport->nic.client = NULL; + } } } Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.14/net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch queue-4.14/net-hns3-fix-the-bug-when-map-buffer-fail.patch queue-4.14/net-hns3-fix-a-bug-when-alloc-new-buffer.patch queue-4.14/net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch queue-4.14/net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch queue-4.14/net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: hns3: add nic_client check when initialize roce base information" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: add nic_client check when initialize roce base information to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Lipeng <lipeng321(a)huawei.com> Date: Tue, 24 Oct 2017 21:02:10 +0800 Subject: net: hns3: add nic_client check when initialize roce base information From: Lipeng <lipeng321(a)huawei.com> [ Upstream commit 3a46f34d20d453f09defb76b11a567647939c0aa ] Roce driver works base on HNS3 driver.If insmod Roce driver before NIC driver there is a error because do not check nic_client. This patch adds nic_client check when initialize roce base information. Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Lipeng <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3981,7 +3981,7 @@ static int hclge_init_client_instance(st vport->roce.client = client; } - if (hdev->roce_client) { + if (hdev->roce_client && hdev->nic_client) { ret = hclge_init_roce_base_info(vport); if (ret) goto err; Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.14/net-hns3-fix-the-tx-rx-ring.queue_index-in-hns3_ring_get_cfg.patch queue-4.14/net-hns3-fix-the-bug-when-map-buffer-fail.patch queue-4.14/net-hns3-fix-a-bug-when-alloc-new-buffer.patch queue-4.14/net-hns3-fix-the-bug-of-hns3_set_txbd_baseinfo.patch queue-4.14/net-hns3-fix-a-bug-in-hclge_uninit_client_instance.patch queue-4.14/net-hns3-fix-a-misuse-to-devm_free_irq.patch queue-4.14/net-hns3-fix-for-getting-advertised_caps-in-hns3_get_link_ksettings.patch queue-4.14/net-hns3-add-nic_client-check-when-initialize-roce-base-information.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "net: dsa: lan9303: Do not disable switch fabric port 0 at .probe" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: dsa: lan9303: Do not disable switch fabric port 0 at .probe to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-dsa-lan9303-do-not-disable-switch-fabric-port-0-at-.probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Egil Hjelmeland <privat(a)egil-hjelmeland.no> Date: Tue, 24 Oct 2017 17:14:10 +0200 Subject: net: dsa: lan9303: Do not disable switch fabric port 0 at .probe From: Egil Hjelmeland <privat(a)egil-hjelmeland.no> [ Upstream commit 3c91b0c1de8d013490bbc41ce9ee8810ea5baddd ] Make the LAN9303 work when lan9303_probe() is called twice. For some unknown reason the LAN9303 switch fail to forward data when switch fabric port 0 TX is disabled during probe. (Write of LAN9303_MAC_TX_CFG_0 in lan9303_disable_processing_port().) In that situation the switch fabric seem to receive frames, because the ALR is learning addresses. But no frames are transmitted on any of the ports. In our system lan9303_probe() is called twice, first time dsa_register_switch() return -EPROBE_DEFER. As an experiment, modified the code to skip writing LAN9303_MAC_TX_CFG_0, port 0 during the first probe. Then the switch works as expected. Resolve the problem by not calling lan9303_disable_processing_port() on port 0 during probe. Ports 1 and 2 are still disabled. Although unsatisfying that the exact failure mechanism is not known, the patch should not cause any harm. Signed-off-by: Egil Hjelmeland <privat(a)egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/dsa/lan9303-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -569,7 +569,7 @@ static int lan9303_disable_processing(st { int p; - for (p = 0; p < LAN9303_NUM_PORTS; p++) { + for (p = 1; p < LAN9303_NUM_PORTS; p++) { int ret = lan9303_disable_processing_port(chip, p); if (ret) Patches currently in stable-queue which might be from privat(a)egil-hjelmeland.no are queue-4.14/net-dsa-lan9303-do-not-disable-switch-fabric-port-0-at-.probe.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mtd: spi-nor: stm32-quadspi: Fix uninitialized error return code" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: spi-nor: stm32-quadspi: Fix uninitialized error return code to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-spi-nor-stm32-quadspi-fix-uninitialized-error-return-code.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Geert Uytterhoeven <geert(a)linux-m68k.org> Date: Thu, 26 Oct 2017 17:12:33 +0200 Subject: mtd: spi-nor: stm32-quadspi: Fix uninitialized error return code From: Geert Uytterhoeven <geert(a)linux-m68k.org> [ Upstream commit 05521bd3d117704a1458eb4d0c3ae821858658f2 ] With gcc 4.1.2: drivers/mtd/spi-nor/stm32-quadspi.c: In function ‘stm32_qspi_tx_poll’: drivers/mtd/spi-nor/stm32-quadspi.c:230: warning: ‘ret’ may be used uninitialized in this function Indeed, if stm32_qspi_cmd.len is zero, ret will be uninitialized. This length is passed from outside the driver using the spi_nor.{read,write}{,_reg}() callbacks. Several functions in drivers/mtd/spi-nor/spi-nor.c (e.g. write_enable(), write_disable(), and erase_chip()) call spi_nor.write_reg() with a zero length. Fix this by returning an explicit zero on success. Fixes: 0d43d7ab277a048c ("mtd: spi-nor: add driver for STM32 quad spi flash controller") Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> Acked-by: Ludovic Barre <ludovic.barre(a)st.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen(a)wedev4u.fr> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/spi-nor/stm32-quadspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -240,12 +240,12 @@ static int stm32_qspi_tx_poll(struct stm STM32_QSPI_FIFO_TIMEOUT_US); if (ret) { dev_err(qspi->dev, "fifo timeout (stat:%#x)\n", sr); - break; + return ret; } tx_fifo(buf++, qspi->io_base + QUADSPI_DR); } - return ret; + return 0; } static int stm32_qspi_tx_mm(struct stm32_qspi *qspi, Patches currently in stable-queue which might be from geert(a)linux-m68k.org are queue-4.14/fbdev-controlfb-add-missing-modes-to-fix-out-of-bounds-access.patch queue-4.14/mtd-spi-nor-stm32-quadspi-fix-uninitialized-error-return-code.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mm: Handle 0 flags in _calc_vm_trans() macro" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mm: Handle 0 flags in _calc_vm_trans() macro to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mm-handle-0-flags-in-_calc_vm_trans-macro.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Jan Kara <jack(a)suse.cz> Date: Fri, 3 Nov 2017 12:21:21 +0100 Subject: mm: Handle 0 flags in _calc_vm_trans() macro From: Jan Kara <jack(a)suse.cz> [ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ] _calc_vm_trans() does not handle the situation when some of the passed flags are 0 (which can happen if these VM flags do not make sense for the architecture). Improve the _calc_vm_trans() macro to return 0 in such situation. Since all passed flags are constant, this does not add any runtime overhead. Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/mman.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -64,8 +64,9 @@ static inline bool arch_validate_prot(un * ("bit1" and "bit2" must be single bits) */ #define _calc_vm_trans(x, bit1, bit2) \ + ((!(bit1) || !(bit2)) ? 0 : \ ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \ - : ((x) & (bit1)) / ((bit1) / (bit2))) + : ((x) & (bit1)) / ((bit1) / (bit2)))) /* * Combine the mmap "prot" argument into "vm_flags" used internally. Patches currently in stable-queue which might be from jack(a)suse.cz are queue-4.14/mm-handle-0-flags-in-_calc_vm_trans-macro.patch queue-4.14/udf-avoid-overflow-when-session-starts-at-large-offset.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mlxsw-spectrum-fix-error-return-code-in-mlxsw_sp_port_create.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Wei Yongjun <weiyongjun1(a)huawei.com> Date: Mon, 6 Nov 2017 11:11:28 +0000 Subject: mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create() From: Wei Yongjun <weiyongjun1(a)huawei.com> [ Upstream commit d86fd113ebbb37726ef7c7cc6fd6d5ce377455d6 ] Fix to return a negative error code from the VID create error handling case instead of 0, as done elsewhere in this function. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Reviewed-by: Ido Schimmel <idosch(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2974,6 +2974,7 @@ static int mlxsw_sp_port_create(struct m if (IS_ERR(mlxsw_sp_port_vlan)) { dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to create VID 1\n", mlxsw_sp_port->local_port); + err = PTR_ERR(mlxsw_sp_port_vlan); goto err_port_vlan_get; } Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are queue-4.14/nullb-fix-error-return-code-in-null_init.patch queue-4.14/mlxsw-spectrum-fix-error-return-code-in-mlxsw_sp_port_create.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "misc: pci_endpoint_test: Fix failure path return values in probe" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled misc: pci_endpoint_test: Fix failure path return values in probe to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: misc-pci_endpoint_test-fix-failure-path-return-values-in-probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Kishon Vijay Abraham I <kishon(a)ti.com> Date: Wed, 11 Oct 2017 14:14:36 +0530 Subject: misc: pci_endpoint_test: Fix failure path return values in probe From: Kishon Vijay Abraham I <kishon(a)ti.com> [ Upstream commit 80068c93688f6143100859c4856f895801c1a1d9 ] Return value of pci_endpoint_test_probe is not set properly in a couple of failure cases. Fix it here. Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/pci_endpoint_test.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -533,6 +533,7 @@ static int pci_endpoint_test_probe(struc test->base = test->bar[test_reg_bar]; if (!test->base) { + err = -ENOMEM; dev_err(dev, "Cannot perform PCI test without BAR%d\n", test_reg_bar); goto err_iounmap; @@ -542,6 +543,7 @@ static int pci_endpoint_test_probe(struc id = ida_simple_get(&pci_endpoint_test_ida, 0, 0, GFP_KERNEL); if (id < 0) { + err = id; dev_err(dev, "unable to get id\n"); goto err_iounmap; } Patches currently in stable-queue which might be from kishon(a)ti.com are queue-4.14/misc-pci_endpoint_test-fix-failure-path-return-values-in-probe.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "misc: pci_endpoint_test: Avoid triggering a BUG()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled misc: pci_endpoint_test: Avoid triggering a BUG() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: misc-pci_endpoint_test-avoid-triggering-a-bug.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Sat, 30 Sep 2017 11:16:51 +0300 Subject: misc: pci_endpoint_test: Avoid triggering a BUG() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 846df244ebefbc9f7b91e9ae7a5e5a2e69fb4772 ] If you call ida_simple_remove(&pci_endpoint_test_ida, id) with a negative "id" then it triggers an immediate BUG_ON(). Let's not allow that. Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/pci_endpoint_test.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -590,6 +590,8 @@ static void pci_endpoint_test_remove(str if (sscanf(misc_device->name, DRV_MODULE_NAME ".%d", &id) != 1) return; + if (id < 0) + return; misc_deregister(&test->miscdev); ida_simple_remove(&pci_endpoint_test_ida, id); Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.14/scsi-bfa-integer-overflow-in-debugfs.patch queue-4.14/fbdev-controlfb-add-missing-modes-to-fix-out-of-bounds-access.patch queue-4.14/misc-pci_endpoint_test-avoid-triggering-a-bug.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "mfd: mxs-lradc: Fix error handling in mxs_lradc_probe()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mfd-mxs-lradc-fix-error-handling-in-mxs_lradc_probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Date: Sat, 14 Oct 2017 01:06:56 +0300 Subject: mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> [ Upstream commit 362741a21a5c4b9ee31e75ce28d63c6d238a745c ] There is the only path, where mxs_lradc_probe() leaves clk undisabled, since it does return instead of goto err_clk. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mfd/mxs-lradc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/mfd/mxs-lradc.c +++ b/drivers/mfd/mxs-lradc.c @@ -196,8 +196,10 @@ static int mxs_lradc_probe(struct platfo platform_set_drvdata(pdev, lradc); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENOMEM; + if (!res) { + ret = -ENOMEM; + goto err_clk; + } switch (lradc->soc) { case IMX23_LRADC: Patches currently in stable-queue which might be from khoroshilov(a)ispras.ru are queue-4.14/mfd-mxs-lradc-fix-error-handling-in-mxs_lradc_probe.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "media: usbtv: fix brightness and contrast controls" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: usbtv: fix brightness and contrast controls to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-usbtv-fix-brightness-and-contrast-controls.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Adam Sampson <ats(a)offog.org> Date: Tue, 24 Oct 2017 16:14:46 -0400 Subject: media: usbtv: fix brightness and contrast controls From: Adam Sampson <ats(a)offog.org> [ Upstream commit b3168c87c0492661badc3e908f977d79e7738a41 ] Because the brightness and contrast controls share a register, usbtv_s_ctrl needs to read the existing values for both controls before inserting the new value. However, the code accidentally wrote to the registers (from an uninitialised stack array), rather than reading them. The user-visible effect of this was that adjusting the brightness would also set the contrast to a random value, and vice versa -- so it wasn't possible to correctly adjust the brightness of usbtv's video output. Tested with an "EasyDAY" UTV007 device. Fixes: c53a846c48f2 ("usbtv: add video controls") Signed-off-by: Adam Sampson <ats(a)offog.org> Reviewed-by: Lubomir Rintel <lkundrak(a)v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/usbtv/usbtv-video.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/media/usb/usbtv/usbtv-video.c +++ b/drivers/media/usb/usbtv/usbtv-video.c @@ -718,8 +718,8 @@ static int usbtv_s_ctrl(struct v4l2_ctrl */ if (ctrl->id == V4L2_CID_BRIGHTNESS || ctrl->id == V4L2_CID_CONTRAST) { ret = usb_control_msg(usbtv->udev, - usb_sndctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + usb_rcvctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, USBTV_BASE + 0x0244, (void *)data, 3, 0); if (ret < 0) goto error; Patches currently in stable-queue which might be from ats(a)offog.org are queue-4.14/media-usbtv-fix-brightness-and-contrast-controls.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-camss-vfe-always-initialize-reg-at-vfe_set_xbar_cfg.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Date: Wed, 1 Nov 2017 08:09:59 -0400 Subject: media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> [ Upstream commit 9917fbcfa20ab987d6381fd0365665e5c1402d75 ] if output->wm_num is bigger than 2, the value for reg is not initialized, as warned by smatch: drivers/media/platform/qcom/camss-8x16/camss-vfe.c:633 vfe_set_xbar_cfg() error: uninitialized symbol 'reg'. drivers/media/platform/qcom/camss-8x16/camss-vfe.c:637 vfe_set_xbar_cfg() error: uninitialized symbol 'reg'. That shouldn't happen in practice, so add a logic that will break the loop if i > 1, fixing the warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Acked-by: Todor Tomov <todor.tomov(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c +++ b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c @@ -622,6 +622,9 @@ static void vfe_set_xbar_cfg(struct vfe_ reg = VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN; if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV16) reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA; + } else { + /* On current devices output->wm_num is always <= 2 */ + break; } if (output->wm_idx[i] % 2 == 1) Patches currently in stable-queue which might be from mchehab(a)s-opensource.com are queue-4.14/media-usbtv-fix-brightness-and-contrast-controls.patch queue-4.14/media-camss-vfe-always-initialize-reg-at-vfe_set_xbar_cfg.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "md-cluster: fix wrong condition check in raid1_write_request" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled md-cluster: fix wrong condition check in raid1_write_request to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: md-cluster-fix-wrong-condition-check-in-raid1_write_request.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Guoqing Jiang <gqjiang(a)suse.com> Date: Fri, 29 Sep 2017 09:16:43 +0800 Subject: md-cluster: fix wrong condition check in raid1_write_request From: Guoqing Jiang <gqjiang(a)suse.com> [ Upstream commit 385f4d7f946b08f36f68b0a28e95a319925b6b62 ] The check used here is to avoid conflict between write and resync, however we used the wrong logic, it should be the inverse of the checking inside "if". Fixes: 589a1c4 ("Suspend writes in RAID1 if within range") Signed-off-by: Guoqing Jiang <gqjiang(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/raid1.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1309,12 +1309,12 @@ static void raid1_write_request(struct m sigset_t full, old; prepare_to_wait(&conf->wait_barrier, &w, TASK_INTERRUPTIBLE); - if (bio_end_sector(bio) <= mddev->suspend_lo || - bio->bi_iter.bi_sector >= mddev->suspend_hi || - (mddev_is_clustered(mddev) && + if ((bio_end_sector(bio) <= mddev->suspend_lo || + bio->bi_iter.bi_sector >= mddev->suspend_hi) && + (!mddev_is_clustered(mddev) || !md_cluster_ops->area_resyncing(mddev, WRITE, - bio->bi_iter.bi_sector, - bio_end_sector(bio)))) + bio->bi_iter.bi_sector, + bio_end_sector(bio)))) break; sigfillset(&full); sigprocmask(SIG_BLOCK, &full, &old); Patches currently in stable-queue which might be from gqjiang(a)suse.com are queue-4.14/badblocks-fix-wrong-return-value-in-badblocks_set-if-badblocks-are-disabled.patch queue-4.14/md-cluster-fix-wrong-condition-check-in-raid1_write_request.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "macvlan: Only deliver one copy of the frame to the macvlan interface" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled macvlan: Only deliver one copy of the frame to the macvlan interface to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: macvlan-only-deliver-one-copy-of-the-frame-to-the-macvlan-interface.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Alexander Duyck <alexander.h.duyck(a)intel.com> Date: Fri, 13 Oct 2017 13:40:24 -0700 Subject: macvlan: Only deliver one copy of the frame to the macvlan interface From: Alexander Duyck <alexander.h.duyck(a)intel.com> [ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ] This patch intoduces a slight adjustment for macvlan to address the fact that in source mode I was seeing two copies of any packet addressed to the macvlan interface being delivered where there should have been only one. The issue appears to be that one copy was delivered based on the source MAC address and then the second copy was being delivered based on the destination MAC address. To fix it I am just treating a unicast address match as though it is not a match since source based macvlan isn't supposed to be matching based on the destination MAC anyway. Fixes: 79cf79abce71 ("macvlan: add source mode") Signed-off-by: Alexander Duyck <alexander.h.duyck(a)intel.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/macvlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -480,7 +480,7 @@ static rx_handler_result_t macvlan_handl struct macvlan_dev, list); else vlan = macvlan_hash_lookup(port, eth->h_dest); - if (vlan == NULL) + if (!vlan || vlan->mode == MACVLAN_MODE_SOURCE) return RX_HANDLER_PASS; dev = vlan->dev; Patches currently in stable-queue which might be from alexander.h.duyck(a)intel.com are queue-4.14/macvlan-only-deliver-one-copy-of-the-frame-to-the-macvlan-interface.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "liquidio: fix kernel panic in VF driver" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled liquidio: fix kernel panic in VF driver to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: liquidio-fix-kernel-panic-in-vf-driver.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Felix Manlunas <felix.manlunas(a)cavium.com> Date: Thu, 26 Oct 2017 16:46:36 -0700 Subject: liquidio: fix kernel panic in VF driver From: Felix Manlunas <felix.manlunas(a)cavium.com> [ Upstream commit aa28667cfbe4ff6f14454dda210b1f2e485f99b5 ] Doing ifconfig down on VF driver in the middle of receiving line rate traffic causes a kernel panic: LiquidIO_VF 0000:02:00.3: should not come here should not get rx when poll mode = 0 for vf BUG: unable to handle kernel NULL pointer dereference at (null) . . . Call Trace: <IRQ> ? tasklet_action+0x102/0x120 __do_softirq+0x91/0x292 irq_exit+0xb6/0xc0 do_IRQ+0x4f/0xd0 common_interrupt+0x93/0x93 </IRQ> RIP: 0010:cpuidle_enter_state+0x142/0x2f0 RSP: 0018:ffffffffa6403e20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff59 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000002ab7519f RDI: 0000000000000000 RBP: ffffffffa6403e58 R08: 0000000000000084 R09: 0000000000000018 R10: ffffffffa6403df0 R11: 00000000000003c7 R12: 0000000000000003 R13: ffffd27ebd806800 R14: ffffffffa64d40d8 R15: 0000007be072823f cpuidle_enter+0x17/0x20 call_cpuidle+0x23/0x40 do_idle+0x18c/0x1f0 cpu_startup_entry+0x64/0x70 rest_init+0xa5/0xb0 start_kernel+0x45e/0x46b x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x6f/0x72 secondary_startup_64+0xa5/0xa5 Code: Bad RIP value. RIP: (null) RSP: ffff9246ed003f28 CR2: 0000000000000000 ---[ end trace 92731e80f31b7d7d ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x24000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt Reason is: in the function assigned to net_device_ops->ndo_stop, the steps for bringing down the interface are done in the wrong order. The step that notifies the NIC firmware to stop forwarding packets to host is done too late. Fix it by moving that step to the beginning. Signed-off-by: Felix Manlunas <felix.manlunas(a)cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c @@ -1289,6 +1289,9 @@ static int liquidio_stop(struct net_devi struct octeon_device *oct = lio->oct_dev; struct napi_struct *napi, *n; + /* tell Octeon to stop forwarding packets to host */ + send_rx_ctrl_cmd(lio, 0); + if (oct->props[lio->ifidx].napi_enabled) { list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list) napi_disable(napi); @@ -1306,9 +1309,6 @@ static int liquidio_stop(struct net_devi netif_carrier_off(netdev); lio->link_changes++; - /* tell Octeon to stop forwarding packets to host */ - send_rx_ctrl_cmd(lio, 0); - ifstate_reset(lio, LIO_IFSTATE_RUNNING); txqs_stop(netdev); Patches currently in stable-queue which might be from felix.manlunas(a)cavium.com are queue-4.14/liquidio-fix-kernel-panic-in-vf-driver.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "lightnvm: pblk: use right flag for GC allocation" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lightnvm: pblk: use right flag for GC allocation to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lightnvm-pblk-use-right-flag-for-gc-allocation.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Javier González <javier(a)cnexlabs.com> Date: Fri, 13 Oct 2017 14:46:02 +0200 Subject: lightnvm: pblk: use right flag for GC allocation From: Javier González <javier(a)cnexlabs.com> [ Upstream commit 7d327a9ed6c4dca341ebf99012e0a6b80a3050e6 ] The data buffer for the GC path allocates virtual memory through vmalloc. When this change was introduced, a flag signaling kmalloc'ed memory was wrongly introduced. Use the right flag when creating a bio from this buffer. Fixes: de54e703a422 ("lightnvm: pblk: use vmalloc for GC data buffer") Signed-off-by: Javier GonzÃ¡lez <javier(a)cnexlabs.com> Signed-off-by: Matias BjÃ¸rling <m(a)bjorling.me> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/lightnvm/pblk-read.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/lightnvm/pblk-read.c +++ b/drivers/lightnvm/pblk-read.c @@ -499,7 +499,7 @@ int pblk_submit_read_gc(struct pblk *pbl data_len = (*secs_to_gc) * geo->sec_size; bio = pblk_bio_map_addr(pblk, data, *secs_to_gc, data_len, - PBLK_KMALLOC_META, GFP_KERNEL); + PBLK_VMALLOC_META, GFP_KERNEL); if (IS_ERR(bio)) { pr_err("pblk: could not allocate GC bio (%lu)\n", PTR_ERR(bio)); goto err_free_dma; @@ -519,7 +519,7 @@ int pblk_submit_read_gc(struct pblk *pbl if (ret) { bio_endio(bio); pr_err("pblk: GC read request failed\n"); - goto err_free_dma; + goto err_free_bio; } if (!wait_for_completion_io_timeout(&wait, @@ -541,10 +541,13 @@ int pblk_submit_read_gc(struct pblk *pbl atomic_long_sub(*secs_to_gc, &pblk->inflight_reads); #endif + bio_put(bio); out: nvm_dev_dma_free(dev->parent, rqd.meta_list, rqd.dma_meta_list); return NVM_IO_OK; +err_free_bio: + bio_put(bio); err_free_dma: nvm_dev_dma_free(dev->parent, rqd.meta_list, rqd.dma_meta_list); return NVM_IO_ERR; Patches currently in stable-queue which might be from javier(a)cnexlabs.com are queue-4.14/lightnvm-pblk-fix-min-size-for-page-mempool.patch queue-4.14/lightnvm-pblk-use-right-flag-for-gc-allocation.patch queue-4.14/lightnvm-pblk-protect-line-bitmap-while-submitting-meta-io.patch queue-4.14/lightnvm-pblk-initialize-debug-stat-counter.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "lightnvm: pblk: protect line bitmap while submitting meta io" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lightnvm: pblk: protect line bitmap while submitting meta io to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lightnvm-pblk-protect-line-bitmap-while-submitting-meta-io.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Rakesh Pandit <rakesh(a)tuxera.com> Date: Fri, 13 Oct 2017 14:45:56 +0200 Subject: lightnvm: pblk: protect line bitmap while submitting meta io From: Rakesh Pandit <rakesh(a)tuxera.com> [ Upstream commit e57903fd972a398b7140d0bc055714e13a0e58c5 ] It seems pblk_dealloc_page would race against pblk_alloc_pages for line bitmap for sector allocation.The chances are very low but might as well protect the bitmap properly. Signed-off-by: Rakesh Pandit <rakesh(a)tuxera.com> Reviewed-by: Javier González <javier(a)cnexlabs.com> Signed-off-by: Matias Bjørling <m(a)bjorling.me> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/lightnvm/pblk-core.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/lightnvm/pblk-core.c +++ b/drivers/lightnvm/pblk-core.c @@ -486,12 +486,14 @@ void pblk_dealloc_page(struct pblk *pblk u64 addr; int i; + spin_lock(&line->lock); addr = find_next_zero_bit(line->map_bitmap, pblk->lm.sec_per_line, line->cur_sec); line->cur_sec = addr - nr_secs; for (i = 0; i < nr_secs; i++, line->cur_sec--) WARN_ON(!test_and_clear_bit(line->cur_sec, line->map_bitmap)); + spin_unlock(&line->lock); } u64 __pblk_alloc_page(struct pblk *pblk, struct pblk_line *line, int nr_secs) Patches currently in stable-queue which might be from rakesh(a)tuxera.com are queue-4.14/lightnvm-pblk-protect-line-bitmap-while-submitting-meta-io.patch queue-4.14/lightnvm-pblk-fix-changing-gc-group-list-for-a-line.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "lightnvm: pblk: prevent gc kicks when gc is not operational" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lightnvm: pblk: prevent gc kicks when gc is not operational to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lightnvm-pblk-prevent-gc-kicks-when-gc-is-not-operational.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Hans Holmberg <hans.holmberg(a)cnexlabs.com> Date: Fri, 13 Oct 2017 14:46:34 +0200 Subject: lightnvm: pblk: prevent gc kicks when gc is not operational From: Hans Holmberg <hans.holmberg(a)cnexlabs.com> [ Upstream commit 3e3a5b8ebd5d3b1d68facc58b0674a2564653222 ] GC can be kicked after it has been shut down when closing the last line during exit, resulting in accesses to freed structures. Make sure that GC is not triggered while it is not operational. Also make sure that GC won't be re-activated during exit when running on another processor by using timer_del_sync. Signed-off-by: Hans Holmberg <hans.holmberg(a)cnexlabs.com> Signed-off-by: Matias Bjørling <m(a)bjorling.me> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/lightnvm/pblk-gc.c | 9 +++++---- drivers/lightnvm/pblk-init.c | 1 + 2 files changed, 6 insertions(+), 4 deletions(-) --- a/drivers/lightnvm/pblk-gc.c +++ b/drivers/lightnvm/pblk-gc.c @@ -486,10 +486,10 @@ void pblk_gc_should_start(struct pblk *p { struct pblk_gc *gc = &pblk->gc; - if (gc->gc_enabled && !gc->gc_active) + if (gc->gc_enabled && !gc->gc_active) { pblk_gc_start(pblk); - - pblk_gc_kick(pblk); + pblk_gc_kick(pblk); + } } /* @@ -628,7 +628,8 @@ void pblk_gc_exit(struct pblk *pblk) flush_workqueue(gc->gc_reader_wq); flush_workqueue(gc->gc_line_reader_wq); - del_timer(&gc->gc_timer); + gc->gc_enabled = 0; + del_timer_sync(&gc->gc_timer); pblk_gc_stop(pblk, 1); if (gc->gc_ts) --- a/drivers/lightnvm/pblk-init.c +++ b/drivers/lightnvm/pblk-init.c @@ -923,6 +923,7 @@ static void *pblk_init(struct nvm_tgt_de pblk->dev = dev; pblk->disk = tdisk; pblk->state = PBLK_STATE_RUNNING; + pblk->gc.gc_enabled = 0; spin_lock_init(&pblk->trans_lock); spin_lock_init(&pblk->lock); Patches currently in stable-queue which might be from hans.holmberg(a)cnexlabs.com are queue-4.14/lightnvm-pblk-prevent-gc-kicks-when-gc-is-not-operational.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "lightnvm: pblk: initialize debug stat counter" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lightnvm: pblk: initialize debug stat counter to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lightnvm-pblk-initialize-debug-stat-counter.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Javier González <javier(a)cnexlabs.com> Date: Fri, 13 Oct 2017 14:46:01 +0200 Subject: lightnvm: pblk: initialize debug stat counter From: Javier González <javier(a)cnexlabs.com> [ Upstream commit a1121176ff757e3c073490a69608ea0b18a00ec1 ] Initialize the stat counter for garbage collected reads. Fixes: a4bd217b43268 ("lightnvm: physical block device (pblk) target") Signed-off-by: Javier GonzÃ¡lez <javier(a)cnexlabs.com> Signed-off-by: Matias BjÃ¸rling <m(a)bjorling.me> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/lightnvm/pblk-init.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/lightnvm/pblk-init.c +++ b/drivers/lightnvm/pblk-init.c @@ -945,6 +945,7 @@ static void *pblk_init(struct nvm_tgt_de atomic_long_set(&pblk->recov_writes, 0); atomic_long_set(&pblk->recov_writes, 0); atomic_long_set(&pblk->recov_gc_writes, 0); + atomic_long_set(&pblk->recov_gc_reads, 0); #endif atomic_long_set(&pblk->read_failed, 0); Patches currently in stable-queue which might be from javier(a)cnexlabs.com are queue-4.14/lightnvm-pblk-fix-min-size-for-page-mempool.patch queue-4.14/lightnvm-pblk-use-right-flag-for-gc-allocation.patch queue-4.14/lightnvm-pblk-protect-line-bitmap-while-submitting-meta-io.patch queue-4.14/lightnvm-pblk-initialize-debug-stat-counter.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "lightnvm: pblk: fix min size for page mempool" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lightnvm: pblk: fix min size for page mempool to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lightnvm-pblk-fix-min-size-for-page-mempool.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Javier González <javier(a)cnexlabs.com> Date: Fri, 13 Oct 2017 14:46:06 +0200 Subject: lightnvm: pblk: fix min size for page mempool From: Javier González <javier(a)cnexlabs.com> [ Upstream commit bd432417681a224d9fa4a9d43be7d4edc82135b2 ] pblk uses an internal page mempool for allocating pages on internal bios. The main two users of this memory pool are partial reads (reads with some sectors in cache and some on media) and padded writes, which need to add dummy pages to an existing bio already containing valid data (and with a large enough bioset allocated). In both cases, the maximum number of pages per bio is defined by the maximum number of physical sectors supported by the underlying device. This patch fixes a bad mempool allocation, where the min_nr of elements on the pool was fixed (to 16), which is lower than the maximum number of sectors supported by NVMe (as of the time for this patch). Instead, use the maximum number of allowed sectors reported by the device. Reported-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Javier GonzÃ¡lez <javier(a)cnexlabs.com> Signed-off-by: Matias BjÃ¸rling <m(a)bjorling.me> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/lightnvm/pblk-core.c | 6 +++--- drivers/lightnvm/pblk-init.c | 15 ++++++++------- drivers/lightnvm/pblk-read.c | 2 +- drivers/lightnvm/pblk.h | 2 +- 4 files changed, 13 insertions(+), 12 deletions(-) --- a/drivers/lightnvm/pblk-core.c +++ b/drivers/lightnvm/pblk-core.c @@ -193,7 +193,7 @@ void pblk_bio_free_pages(struct pblk *pb bio_advance(bio, off * PBLK_EXPOSED_PAGE_SIZE); for (i = off; i < nr_pages + off; i++) { bv = bio->bi_io_vec[i]; - mempool_free(bv.bv_page, pblk->page_pool); + mempool_free(bv.bv_page, pblk->page_bio_pool); } } @@ -205,14 +205,14 @@ int pblk_bio_add_pages(struct pblk *pblk int i, ret; for (i = 0; i < nr_pages; i++) { - page = mempool_alloc(pblk->page_pool, flags); + page = mempool_alloc(pblk->page_bio_pool, flags); if (!page) goto err; ret = bio_add_pc_page(q, bio, page, PBLK_EXPOSED_PAGE_SIZE, 0); if (ret != PBLK_EXPOSED_PAGE_SIZE) { pr_err("pblk: could not add page to bio\n"); - mempool_free(page, pblk->page_pool); + mempool_free(page, pblk->page_bio_pool); goto err; } } --- a/drivers/lightnvm/pblk-init.c +++ b/drivers/lightnvm/pblk-init.c @@ -132,7 +132,6 @@ static int pblk_rwb_init(struct pblk *pb } /* Minimum pages needed within a lun */ -#define PAGE_POOL_SIZE 16 #define ADDR_POOL_SIZE 64 static int pblk_set_ppaf(struct pblk *pblk) @@ -247,14 +246,16 @@ static int pblk_core_init(struct pblk *p if (pblk_init_global_caches(pblk)) return -ENOMEM; - pblk->page_pool = mempool_create_page_pool(PAGE_POOL_SIZE, 0); - if (!pblk->page_pool) + /* internal bios can be at most the sectors signaled by the device. */ + pblk->page_bio_pool = mempool_create_page_pool(nvm_max_phys_sects(dev), + 0); + if (!pblk->page_bio_pool) return -ENOMEM; pblk->line_ws_pool = mempool_create_slab_pool(PBLK_WS_POOL_SIZE, pblk_blk_ws_cache); if (!pblk->line_ws_pool) - goto free_page_pool; + goto free_page_bio_pool; pblk->rec_pool = mempool_create_slab_pool(geo->nr_luns, pblk_rec_cache); if (!pblk->rec_pool) @@ -309,8 +310,8 @@ free_rec_pool: mempool_destroy(pblk->rec_pool); free_blk_ws_pool: mempool_destroy(pblk->line_ws_pool); -free_page_pool: - mempool_destroy(pblk->page_pool); +free_page_bio_pool: + mempool_destroy(pblk->page_bio_pool); return -ENOMEM; } @@ -322,7 +323,7 @@ static void pblk_core_free(struct pblk * if (pblk->bb_wq) destroy_workqueue(pblk->bb_wq); - mempool_destroy(pblk->page_pool); + mempool_destroy(pblk->page_bio_pool); mempool_destroy(pblk->line_ws_pool); mempool_destroy(pblk->rec_pool); mempool_destroy(pblk->g_rq_pool); --- a/drivers/lightnvm/pblk-read.c +++ b/drivers/lightnvm/pblk-read.c @@ -238,7 +238,7 @@ static int pblk_fill_partial_read_bio(st kunmap_atomic(src_p); kunmap_atomic(dst_p); - mempool_free(src_bv.bv_page, pblk->page_pool); + mempool_free(src_bv.bv_page, pblk->page_bio_pool); hole = find_next_zero_bit(read_bitmap, nr_secs, hole + 1); } while (hole < nr_secs); --- a/drivers/lightnvm/pblk.h +++ b/drivers/lightnvm/pblk.h @@ -618,7 +618,7 @@ struct pblk { struct list_head compl_list; - mempool_t *page_pool; + mempool_t *page_bio_pool; mempool_t *line_ws_pool; mempool_t *rec_pool; mempool_t *g_rq_pool; Patches currently in stable-queue which might be from javier(a)cnexlabs.com are queue-4.14/lightnvm-pblk-fix-min-size-for-page-mempool.patch queue-4.14/lightnvm-pblk-use-right-flag-for-gc-allocation.patch queue-4.14/lightnvm-pblk-protect-line-bitmap-while-submitting-meta-io.patch queue-4.14/lightnvm-pblk-initialize-debug-stat-counter.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "lightnvm: pblk: fix changing GC group list for a line" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lightnvm: pblk: fix changing GC group list for a line to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lightnvm-pblk-fix-changing-gc-group-list-for-a-line.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Rakesh Pandit <rakesh(a)tuxera.com> Date: Fri, 13 Oct 2017 14:46:28 +0200 Subject: lightnvm: pblk: fix changing GC group list for a line From: Rakesh Pandit <rakesh(a)tuxera.com> [ Upstream commit 27b978725d895e704aab44b99242a0514485d798 ] pblk_line_gc_list seems to had a bug since the introduction of pblk in getting GC list for a line. In b20ba1bc7 while redesigning the GC algorithm, the naming for the GC thresholds was altered, but the values for high_thrs and mid_thrs were not. The result is that when moving to the GC lists, the mid threshold is never evaluated. Fixes: a4bd217b4("lightnvm: physical block device (pblk) target") Signed-off-by: Rakesh Pandit <rakesh(a)tuxera.com> Signed-off-by: Matias Bjørling <m(a)bjorling.me> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/lightnvm/pblk-init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/lightnvm/pblk-init.c +++ b/drivers/lightnvm/pblk-init.c @@ -681,8 +681,8 @@ static int pblk_lines_init(struct pblk * lm->blk_bitmap_len = BITS_TO_LONGS(geo->nr_luns) * sizeof(long); lm->sec_bitmap_len = BITS_TO_LONGS(lm->sec_per_line) * sizeof(long); lm->lun_bitmap_len = BITS_TO_LONGS(geo->nr_luns) * sizeof(long); - lm->high_thrs = lm->sec_per_line / 2; - lm->mid_thrs = lm->sec_per_line / 4; + lm->mid_thrs = lm->sec_per_line / 2; + lm->high_thrs = lm->sec_per_line / 4; lm->meta_distance = (geo->nr_luns / 2) * pblk->min_write_pgs; /* Calculate necessary pages for smeta. See comment over struct Patches currently in stable-queue which might be from rakesh(a)tuxera.com are queue-4.14/lightnvm-pblk-protect-line-bitmap-while-submitting-meta-io.patch queue-4.14/lightnvm-pblk-fix-changing-gc-group-list-for-a-line.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "l2tp: cleanup l2tp_tunnel_delete calls" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled l2tp: cleanup l2tp_tunnel_delete calls to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: l2tp-cleanup-l2tp_tunnel_delete-calls.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Jiri Slaby <jslaby(a)suse.cz> Date: Wed, 25 Oct 2017 15:57:55 +0200 Subject: l2tp: cleanup l2tp_tunnel_delete calls From: Jiri Slaby <jslaby(a)suse.cz> [ Upstream commit 4dc12ffeaeac939097a3f55c881d3dc3523dff0c ] l2tp_tunnel_delete does not return anything since commit 62b982eeb458 ("l2tp: fix race condition in l2tp_tunnel_delete"). But call sites of l2tp_tunnel_delete still do casts to void to avoid unused return value warnings. Kill these now useless casts. Signed-off-by: Jiri Slaby <jslaby(a)suse.cz> Cc: Sabrina Dubroca <sd(a)queasysnail.net> Cc: Guillaume Nault <g.nault(a)alphalink.fr> Cc: David S. Miller <davem(a)davemloft.net> Cc: netdev(a)vger.kernel.org Acked-by: Guillaume Nault <g.nault(a)alphalink.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/l2tp/l2tp_core.c | 2 +- net/l2tp/l2tp_netlink.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1891,7 +1891,7 @@ static __net_exit void l2tp_exit_net(str rcu_read_lock_bh(); list_for_each_entry_rcu(tunnel, &pn->l2tp_tunnel_list, list) { - (void)l2tp_tunnel_delete(tunnel); + l2tp_tunnel_delete(tunnel); } rcu_read_unlock_bh(); --- a/net/l2tp/l2tp_netlink.c +++ b/net/l2tp/l2tp_netlink.c @@ -282,7 +282,7 @@ static int l2tp_nl_cmd_tunnel_delete(str l2tp_tunnel_notify(&l2tp_nl_family, info, tunnel, L2TP_CMD_TUNNEL_DELETE); - (void) l2tp_tunnel_delete(tunnel); + l2tp_tunnel_delete(tunnel); l2tp_tunnel_dec_refcount(tunnel); Patches currently in stable-queue which might be from jslaby(a)suse.cz are queue-4.14/l2tp-cleanup-l2tp_tunnel_delete-calls.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: nVMX: Fix EPT switching advertising" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: nVMX: Fix EPT switching advertising to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-nvmx-fix-ept-switching-advertising.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Wanpeng Li <wanpeng.li(a)hotmail.com> Date: Thu, 19 Oct 2017 07:00:34 +0800 Subject: KVM: nVMX: Fix EPT switching advertising From: Wanpeng Li <wanpeng.li(a)hotmail.com> [ Upstream commit 575b3a2cb439b03fd603ea77c73c76f3ed237596 ] I can use vmxcap tool to observe "EPTP Switching yes" even if EPT is not exposed to L1. EPT switching is advertised unconditionally since it is emulated, however, it can be treated as an extended feature for EPT and it should not be advertised if EPT itself is not exposed. This patch fixes it. Reviewed-by: David Hildenbrand <david(a)redhat.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Jim Mattson <jmattson(a)google.com> Signed-off-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/vmx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2845,8 +2845,9 @@ static void nested_vmx_setup_ctls_msrs(s * Advertise EPTP switching unconditionally * since we emulate it */ - vmx->nested.nested_vmx_vmfunc_controls = - VMX_VMFUNC_EPTP_SWITCHING; + if (enable_ept) + vmx->nested.nested_vmx_vmfunc_controls = + VMX_VMFUNC_EPTP_SWITCHING; } /* Patches currently in stable-queue which might be from wanpeng.li(a)hotmail.com are queue-4.14/kvm-nvmx-fix-ept-switching-advertising.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iscsi-target: fix memory leak in lio_target_tiqn_addtpg()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iscsi-target: fix memory leak in lio_target_tiqn_addtpg() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iscsi-target-fix-memory-leak-in-lio_target_tiqn_addtpg.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: tangwenji <tang.wenji(a)zte.com.cn> Date: Fri, 15 Sep 2017 16:03:13 +0800 Subject: iscsi-target: fix memory leak in lio_target_tiqn_addtpg() From: tangwenji <tang.wenji(a)zte.com.cn> [ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ] tpg must free when call core_tpg_register() return fail Signed-off-by: tangwenji <tang.wenji(a)zte.com.cn> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/iscsi/iscsi_target_configfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -1123,7 +1123,7 @@ static struct se_portal_group *lio_targe ret = core_tpg_register(wwn, &tpg->tpg_se_tpg, SCSI_PROTOCOL_ISCSI); if (ret < 0) - return NULL; + goto free_out; ret = iscsit_tpg_add_portal_group(tiqn, tpg); if (ret != 0) @@ -1135,6 +1135,7 @@ static struct se_portal_group *lio_targe return &tpg->tpg_se_tpg; out: core_tpg_deregister(&tpg->tpg_se_tpg); +free_out: kfree(tpg); return NULL; } Patches currently in stable-queue which might be from tang.wenji(a)zte.com.cn are queue-4.14/target-fix-condition-return-in-core_pr_dump_initiator_port.patch queue-4.14/iscsi-target-fix-memory-leak-in-lio_target_tiqn_addtpg.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ipv4: ipv4_default_advmss() should use route mtu" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipv4: ipv4_default_advmss() should use route mtu to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipv4-ipv4_default_advmss-should-use-route-mtu.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Eric Dumazet <edumazet(a)google.com> Date: Wed, 18 Oct 2017 17:02:03 -0700 Subject: ipv4: ipv4_default_advmss() should use route mtu From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit 164a5e7ad531e181334a3d3f03d0d5ad20d6faea ] ipv4_default_advmss() incorrectly uses the device MTU instead of the route provided one. IPv6 has the proper behavior, lets harmonize the two protocols. Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1254,7 +1254,7 @@ static void set_class_tag(struct rtable static unsigned int ipv4_default_advmss(const struct dst_entry *dst) { unsigned int header_size = sizeof(struct tcphdr) + sizeof(struct iphdr); - unsigned int advmss = max_t(unsigned int, dst->dev->mtu - header_size, + unsigned int advmss = max_t(unsigned int, ipv4_mtu(dst) - header_size, ip_rt_min_advmss); return min(advmss, IPV4_MAX_PMTU - header_size); Patches currently in stable-queue which might be from edumazet(a)google.com are queue-4.14/ipv4-ipv4_default_advmss-should-use-route-mtu.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "ipmi_si: fix memory leak on new_smi" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipmi_si: fix memory leak on new_smi to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipmi_si-fix-memory-leak-on-new_smi.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 17 Oct 2017 16:54:52 +0100 Subject: ipmi_si: fix memory leak on new_smi From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit c0a32fe13cd323ca9420500b16fd69589c9ba91e ] The error exit path omits kfree'ing the allocated new_smi, causing a memory leak. Fix this by kfree'ing new_smi. Detected by CoverityScan, CID#14582571 ("Resource Leak") Fixes: 7e030d6dff71 ("ipmi: Prefer ACPI system interfaces over SMBIOS ones") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Corey Minyard <cminyard(a)mvista.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/ipmi/ipmi_si_intf.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -3469,6 +3469,7 @@ static int add_smi(struct smi_info *new_ ipmi_addr_src_to_str(new_smi->addr_source), si_to_str[new_smi->si_type]); rv = -EBUSY; + kfree(new_smi); goto out_err; } } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.14/btrfs-avoid-null-pointer-dereference-on-fs_info-when-calling-btrfs_crit.patch queue-4.14/ipmi_si-fix-memory-leak-on-new_smi.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iommu/mediatek: Fix driver name" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/mediatek: Fix driver name to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-mediatek-fix-driver-name.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Matthias Brugger <matthias.bgg(a)gmail.com> Date: Mon, 30 Oct 2017 12:37:55 +0100 Subject: iommu/mediatek: Fix driver name From: Matthias Brugger <matthias.bgg(a)gmail.com> [ Upstream commit 395df08d2e1de238a9c8c33fdcd0e2160efd63a9 ] There exist two Mediatek iommu drivers for the two different generations of the device. But both drivers have the same name "mtk-iommu". This breaks the registration of the second driver: Error: Driver 'mtk-iommu' is already registered, aborting... Fix this by changing the name for first generation to "mtk-iommu-v1". Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW") Signed-off-by: Matthias Brugger <matthias.bgg(a)gmail.com> Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/mtk_iommu_v1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/iommu/mtk_iommu_v1.c +++ b/drivers/iommu/mtk_iommu_v1.c @@ -708,7 +708,7 @@ static struct platform_driver mtk_iommu_ .probe = mtk_iommu_probe, .remove = mtk_iommu_remove, .driver = { - .name = "mtk-iommu", + .name = "mtk-iommu-v1", .of_match_table = mtk_iommu_of_ids, .pm = &mtk_iommu_pm_ops, } Patches currently in stable-queue which might be from matthias.bgg(a)gmail.com are queue-4.14/soc-mediatek-pwrap-fix-compiler-errors.patch queue-4.14/iommu-mediatek-fix-driver-name.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "iommu/amd: Limit the IOVA page range to the specified addresses" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/amd: Limit the IOVA page range to the specified addresses to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-amd-limit-the-iova-page-range-to-the-specified-addresses.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Gary R Hook <gary.hook(a)amd.com> Date: Fri, 3 Nov 2017 10:50:34 -0600 Subject: iommu/amd: Limit the IOVA page range to the specified addresses From: Gary R Hook <gary.hook(a)amd.com> [ Upstream commit b92b4fb5c14257c0e7eae291ecc1f7b1962e1699 ] The extent of pages specified when applying a reserved region should include up to the last page of the range, but not the page following the range. Signed-off-by: Gary R Hook <gary.hook(a)amd.com> Fixes: 8d54d6c8b8f3 ('iommu/amd: Implement apply_dm_region call-back') Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -3155,7 +3155,7 @@ static void amd_iommu_apply_resv_region( unsigned long start, end; start = IOVA_PFN(region->start); - end = IOVA_PFN(region->start + region->length); + end = IOVA_PFN(region->start + region->length - 1); WARN_ON_ONCE(reserve_iova(&dma_dom->iovad, start, end) == NULL); } Patches currently in stable-queue which might be from gary.hook(a)amd.com are queue-4.14/iommu-amd-limit-the-iova-page-range-to-the-specified-addresses.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "icmp: don't fail on fragment reassembly time exceeded" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled icmp: don't fail on fragment reassembly time exceeded to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: icmp-don-t-fail-on-fragment-reassembly-time-exceeded.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Matteo Croce <mcroce(a)redhat.com> Date: Thu, 12 Oct 2017 16:12:37 +0200 Subject: icmp: don't fail on fragment reassembly time exceeded From: Matteo Croce <mcroce(a)redhat.com> [ Upstream commit 258bbb1b0e594ad5f5652cb526b3c63e6a7fad3d ] The ICMP implementation currently replies to an ICMP time exceeded message (type 11) with an ICMP host unreachable message (type 3, code 1). However, time exceeded messages can either represent "time to live exceeded in transit" (code 0) or "fragment reassembly time exceeded" (code 1). Unconditionally replying to "fragment reassembly time exceeded" with host unreachable messages might cause unjustified connection resets which are now easily triggered as UFO has been removed, because, in turn, sending large buffers triggers IP fragmentation. The issue can be easily reproduced by running a lot of UDP streams which is likely to trigger IP fragmentation: # start netserver in the test namespace ip netns add test ip netns exec test netserver # create a VETH pair ip link add name veth0 type veth peer name veth0 netns test ip link set veth0 up ip -n test link set veth0 up for i in $(seq 20 29); do # assign addresses to both ends ip addr add dev veth0 192.168.$i.1/24 ip -n test addr add dev veth0 192.168.$i.2/24 # start the traffic netperf -L 192.168.$i.1 -H 192.168.$i.2 -t UDP_STREAM -l 0 & done # wait send_data: data send error: No route to host (errno 113) netperf: send_omni: send_data failed: No route to host We need to differentiate instead: if fragment reassembly time exceeded is reported, we need to silently drop the packet, if time to live exceeded is reported, maintain the current behaviour. In both cases increment the related error count "icmpInTimeExcds". While at it, fix a typo in a comment, and convert the if statement into a switch to mate it more readable. Signed-off-by: Matteo Croce <mcroce(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/icmp.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -782,7 +782,7 @@ static bool icmp_tag_validation(int prot } /* - * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, ICMP_QUENCH, and + * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEEDED, ICMP_QUENCH, and * ICMP_PARAMETERPROB. */ @@ -810,7 +810,8 @@ static bool icmp_unreach(struct sk_buff if (iph->ihl < 5) /* Mangled header, drop. */ goto out_err; - if (icmph->type == ICMP_DEST_UNREACH) { + switch (icmph->type) { + case ICMP_DEST_UNREACH: switch (icmph->code & 15) { case ICMP_NET_UNREACH: case ICMP_HOST_UNREACH: @@ -846,8 +847,16 @@ static bool icmp_unreach(struct sk_buff } if (icmph->code > NR_ICMP_UNREACH) goto out; - } else if (icmph->type == ICMP_PARAMETERPROB) + break; + case ICMP_PARAMETERPROB: info = ntohl(icmph->un.gateway) >> 24; + break; + case ICMP_TIME_EXCEEDED: + __ICMP_INC_STATS(net, ICMP_MIB_INTIMEEXCDS); + if (icmph->code == ICMP_EXC_FRAGTIME) + goto out; + break; + } /* * Throw it at our lower layers Patches currently in stable-queue which might be from mcroce(a)redhat.com are queue-4.14/icmp-don-t-fail-on-fragment-reassembly-time-exceeded.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "IB/mlx4: Fix RSS's QPC attributes assignments" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/mlx4: Fix RSS's QPC attributes assignments to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-mlx4-fix-rss-s-qpc-attributes-assignments.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:28:59 CET 2017 From: Guy Levi <guyle(a)mellanox.com> Date: Wed, 25 Oct 2017 22:39:35 +0300 Subject: IB/mlx4: Fix RSS's QPC attributes assignments From: Guy Levi <guyle(a)mellanox.com> [ Upstream commit 108809a0571cd1e1b317c5c083a371e163e1f8f9 ] In the modify QP handler the base_qpn_udp field in the RSS QPC is overwrite later by irrelevant value assignment. Hence, ingress packets which gets to the RSS QP will be steered then to a garbage QPN. The patch fixes this by skipping the above assignment when a RSS QP is modified, also, the RSS context's attributes assignments are relocated just before the context is posted to avoid future issues like this. Additionally, this patch takes the opportunity to change the code to be disciplined to the device's manual and assigns the RSS QP context just at RESET to INIT transition. Fixes:3078f5f1bd8b ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi <guyle(a)mellanox.com> Reviewed-by: Yishai Hadas <yishaih(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/mlx4/qp.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -2182,11 +2182,6 @@ static int __mlx4_ib_modify_qp(void *src context->flags = cpu_to_be32((to_mlx4_state(new_state) << 28) | (to_mlx4_st(dev, qp->mlx4_ib_qp_type) << 16)); - if (rwq_ind_tbl) { - fill_qp_rss_context(context, qp); - context->flags |= cpu_to_be32(1 << MLX4_RSS_QPC_FLAG_OFFSET); - } - if (!(attr_mask & IB_QP_PATH_MIG_STATE)) context->flags |= cpu_to_be32(MLX4_QP_PM_MIGRATED << 11); else { @@ -2387,6 +2382,7 @@ static int __mlx4_ib_modify_qp(void *src context->pd = cpu_to_be32(pd->pdn); if (!rwq_ind_tbl) { + context->params1 = cpu_to_be32(MLX4_IB_ACK_REQ_FREQ << 28); get_cqs(qp, src_type, &send_cq, &recv_cq); } else { /* Set dummy CQs to be compatible with HV and PRM */ send_cq = to_mcq(rwq_ind_tbl->ind_tbl[0]->cq); @@ -2394,7 +2390,6 @@ static int __mlx4_ib_modify_qp(void *src } context->cqn_send = cpu_to_be32(send_cq->mcq.cqn); context->cqn_recv = cpu_to_be32(recv_cq->mcq.cqn); - context->params1 = cpu_to_be32(MLX4_IB_ACK_REQ_FREQ << 28); /* Set "fast registration enabled" for all kernel QPs */ if (!ibuobject) @@ -2513,7 +2508,7 @@ static int __mlx4_ib_modify_qp(void *src MLX4_IB_LINK_TYPE_ETH; if (dev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) { /* set QP to receive both tunneled & non-tunneled packets */ - if (!(context->flags & cpu_to_be32(1 << MLX4_RSS_QPC_FLAG_OFFSET))) + if (!rwq_ind_tbl) context->srqn = cpu_to_be32(7 << 28); } } @@ -2562,6 +2557,13 @@ static int __mlx4_ib_modify_qp(void *src } } + if (rwq_ind_tbl && + cur_state == IB_QPS_RESET && + new_state == IB_QPS_INIT) { + fill_qp_rss_context(context, qp); + context->flags |= cpu_to_be32(1 << MLX4_RSS_QPC_FLAG_OFFSET); + } + err = mlx4_qp_modify(dev->dev, &qp->mtt, to_mlx4_state(cur_state), to_mlx4_state(new_state), context, optpar, sqd_event, &qp->mqp); Patches currently in stable-queue which might be from guyle(a)mellanox.com are queue-4.14/ib-mlx4-fix-rss-s-qpc-attributes-assignments.patch

7 years, 6 months

1
0
0 0

[Linux-stable-mirror] Patch "IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-grab-rtnl-lock-on-heavy-flush-when-calling-ndo_open-stop.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Dec 18 13:29:00 CET 2017 From: Alex Vesker <valex(a)mellanox.com> Date: Tue, 10 Oct 2017 10:36:41 +0300 Subject: IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop From: Alex Vesker <valex(a)mellanox.com> [ Upstream commit b4b678b06f6eef18bff44a338c01870234db0bc9 ] When ndo_open and ndo_stop are called RTNL lock should be held. In this specific case ipoib_ib_dev_open calls the offloaded ndo_open which re-sets the number of TX queue assuming RTNL lock is held. Since RTNL lock is not held, RTNL assert will fail. Signed-off-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -1203,10 +1203,15 @@ static void __ipoib_ib_dev_flush(struct ipoib_ib_dev_down(dev); if (level == IPOIB_FLUSH_HEAVY) { + rtnl_lock(); if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) ipoib_ib_dev_stop(dev); - if (ipoib_ib_dev_open(dev) != 0) + + result = ipoib_ib_dev_open(dev); + rtnl_unlock(); + if (result) return; + if (netif_queue_stopped(dev)) netif_start_queue(dev); } Patches currently in stable-queue which might be from valex(a)mellanox.com are queue-4.14/ib-ipoib-grab-rtnl-lock-on-heavy-flush-when-calling-ndo_open-stop.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror