- Linux-stable-mirror - lists.linaro.org

[PATCH v2] media: videobuf2: forbid remove_bufs when legacy fileio is active

by Marek Szyprowski

vb2_ioctl_remove_bufs() call manipulates queue internal buffer list, potentially overwriting some pointers used by the legacy fileio access mode. Add a vb2_verify_memory_type() check symmetrical to vb2_ioctl_create_bufs() to forbid that ioctl when fileio is active to protect internal queue state between subsequent read/write calls. CC: stable(a)vger.kernel.org Fixes: a3293a85381e ("media: v4l2: Add REMOVE_BUFS ioctl") Reported-by: Shuangpeng Bai<SJB7183(a)psu.edu> Suggested-by: Benjamin Gaignard <benjamin.gaignard(a)collabora.com> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- v2: - dropped a change to vb2_ioctl_create_bufs(), as it is already handled by the vb2_verify_memory_type() call - replaced queue->type check in vb2_ioctl_remove_bufs() by a call to vb2_verify_memory_type() which covers all cases v1: https://lore.kernel.org/all/20251016111154.993949-1-m.szyprowski@samsung.co… --- drivers/media/common/videobuf2/videobuf2-v4l2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c index d911021c1bb0..0de7490292fe 100644 --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c @@ -1000,9 +1000,11 @@ int vb2_ioctl_remove_bufs(struct file *file, void *priv, struct v4l2_remove_buffers *d) { struct video_device *vdev = video_devdata(file); + int res; - if (vdev->queue->type != d->type) - return -EINVAL; + res = vb2_verify_memory_type(vdev->queue, vdev->queue->memory, d->type); + if (res) + return res; if (d->count == 0) return 0; -- 2.34.1

1 week, 6 days

3
4
0 0

[PATCH v2 2/4] net: ravb: Allocate correct number of queues based on SoC support

by Prabhakar

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> On SoCs that only support the best-effort queue and not the network control queue, calling alloc_etherdev_mqs() with fixed values for TX/RX queues is not appropriate. Use the nc_queues flag from the per-SoC match data to determine whether the network control queue is available, and fall back to a single TX/RX queue when it is not. This ensures correct queue allocation across all supported SoCs. Fixes: a92f4f0662bf ("ravb: Add nc_queue to struct ravb_hw_info") Cc: stable(a)vger.kernel.org Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas(a)ragnatech.se> --- v1->v2: - Added Reviewed-by tag from Niklas. --- drivers/net/ethernet/renesas/ravb_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 69d382e8757d..a200e205825a 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2926,13 +2926,14 @@ static int ravb_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, PTR_ERR(rstc), "failed to get cpg reset\n"); + info = of_device_get_match_data(&pdev->dev); + ndev = alloc_etherdev_mqs(sizeof(struct ravb_private), - NUM_TX_QUEUE, NUM_RX_QUEUE); + info->nc_queues ? NUM_TX_QUEUE : 1, + info->nc_queues ? NUM_RX_QUEUE : 1); if (!ndev) return -ENOMEM; - info = of_device_get_match_data(&pdev->dev); - ndev->features = info->net_features; ndev->hw_features = info->net_hw_features; ndev->vlan_features = info->vlan_features; -- 2.43.0

1 week, 6 days

3
2
0 0

[PATCH v2 1/4] net: ravb: Make DBAT entry count configurable per-SoC

by Prabhakar

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> The number of CDARq (Current Descriptor Address Register) registers is not fixed to 22 across all SoC variants. For example, the GBETH implementation uses only two entries. Hardcoding the value leads to incorrect resource allocation on such platforms. Pass the DBAT entry count through the per-SoC hardware info struct and use it during probe instead of relying on a fixed constant. This ensures correct descriptor table sizing and initialization across different SoCs. Fixes: feab85c7ccea ("ravb: Add support for RZ/G2L SoC") Cc: stable(a)vger.kernel.org Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas(a)ragnatech.se> --- v1->v2: - Added Reviewed-by tag from Niklas. --- drivers/net/ethernet/renesas/ravb.h | 2 +- drivers/net/ethernet/renesas/ravb_main.c | 9 +++++++-- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h index 7b48060c250b..d65cd83ddd16 100644 --- a/drivers/net/ethernet/renesas/ravb.h +++ b/drivers/net/ethernet/renesas/ravb.h @@ -1017,7 +1017,6 @@ enum CSR2_BIT { #define CSR2_CSUM_ENABLE (CSR2_RTCP4 | CSR2_RUDP4 | CSR2_RICMP4 | \ CSR2_RTCP6 | CSR2_RUDP6 | CSR2_RICMP6) -#define DBAT_ENTRY_NUM 22 #define RX_QUEUE_OFFSET 4 #define NUM_RX_QUEUE 2 #define NUM_TX_QUEUE 2 @@ -1062,6 +1061,7 @@ struct ravb_hw_info { u32 rx_max_frame_size; u32 rx_buffer_size; u32 rx_desc_size; + u32 dbat_entry_num; unsigned aligned_tx: 1; unsigned coalesce_irqs:1; /* Needs software IRQ coalescing */ diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 9d3bd65b85ff..69d382e8757d 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2694,6 +2694,7 @@ static const struct ravb_hw_info ravb_gen2_hw_info = { .rx_buffer_size = SZ_2K + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)), .rx_desc_size = sizeof(struct ravb_ex_rx_desc), + .dbat_entry_num = 22, .aligned_tx = 1, .gptp = 1, .nc_queues = 1, @@ -2717,6 +2718,7 @@ static const struct ravb_hw_info ravb_gen3_hw_info = { .rx_buffer_size = SZ_2K + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)), .rx_desc_size = sizeof(struct ravb_ex_rx_desc), + .dbat_entry_num = 22, .internal_delay = 1, .tx_counters = 1, .multi_irqs = 1, @@ -2743,6 +2745,7 @@ static const struct ravb_hw_info ravb_gen4_hw_info = { .rx_buffer_size = SZ_2K + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)), .rx_desc_size = sizeof(struct ravb_ex_rx_desc), + .dbat_entry_num = 22, .internal_delay = 1, .tx_counters = 1, .multi_irqs = 1, @@ -2769,6 +2772,7 @@ static const struct ravb_hw_info ravb_rzv2m_hw_info = { .rx_buffer_size = SZ_2K + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)), .rx_desc_size = sizeof(struct ravb_ex_rx_desc), + .dbat_entry_num = 22, .multi_irqs = 1, .err_mgmt_irqs = 1, .gptp = 1, @@ -2794,6 +2798,7 @@ static const struct ravb_hw_info gbeth_hw_info = { .rx_max_frame_size = SZ_8K, .rx_buffer_size = SZ_2K, .rx_desc_size = sizeof(struct ravb_rx_desc), + .dbat_entry_num = 2, .aligned_tx = 1, .coalesce_irqs = 1, .tx_counters = 1, @@ -3025,7 +3030,7 @@ static int ravb_probe(struct platform_device *pdev) ravb_parse_delay_mode(np, ndev); /* Allocate descriptor base address table */ - priv->desc_bat_size = sizeof(struct ravb_desc) * DBAT_ENTRY_NUM; + priv->desc_bat_size = sizeof(struct ravb_desc) * info->dbat_entry_num; priv->desc_bat = dma_alloc_coherent(ndev->dev.parent, priv->desc_bat_size, &priv->desc_bat_dma, GFP_KERNEL); if (!priv->desc_bat) { @@ -3035,7 +3040,7 @@ static int ravb_probe(struct platform_device *pdev) error = -ENOMEM; goto out_rpm_put; } - for (q = RAVB_BE; q < DBAT_ENTRY_NUM; q++) + for (q = RAVB_BE; q < info->dbat_entry_num; q++) priv->desc_bat[q].die_dt = DT_EOS; /* Initialise HW timestamp list */ -- 2.43.0

1 week, 6 days

3
2
0 0

1_855-219-0007 Round-the-Clock Qu!ckB00ks® Enterprise™ Help Line Numbers

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 Qu!ckB00ks® Enterprise™ Supp0rt Helpline Directory – Always Open

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 24/7 Qu!ckB00ks® Enterprise™ Customer Supp0rt Numbers – Full Directory

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 Complete Qu!ckB00ks® Enterprise™ Helpline Directory (24/7 Supp0rt)

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 24/7 Qu!ckB00ks® Enterprise™ Supp0rt Directory – Live Help Numbers

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 Real-Time Supp0rt Directory for Qu!ckB00ks® Enterprise™ (Live Help 24/7)

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 How to Reach Qu!ckB00ks® Enterprise™ Live Supp0rt Anytime (24/7 Directory)

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 Directory of Live Qu!ckB00ks® Enterprise™ Helplines (24/7 Assistance)

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 Speak to a Live Agent: 24/7 Qu!ckB00ks® Enterprise™ Supp0rt Directory

by penelopemorrison＠xutin.org

📞 Call 24/7 QuickBooks® Enterprise™ Support: 1-855-219-0007 Are you facing issues with QuickBooks® Enterprise™ and need immediate assistance? Do not worry--help is just a phone call away! Our 24/7 QuickBooks® Enterprise™ Support is available at 1-855-219-0007, ready to help you resolve any accounting or technical issues around the clock. Whether it is late at night, early morning, or during a holiday, our expert team is standing by to provide fast, friendly support. Why Call 24/7 QuickBooks® Enterprise™ Support? 📈 QuickBooks® Enterprise™ is a powerful accounting solution used by thousands of businesses across the U.S. But even the most robust software can run into occasional hiccups--and when it does, you need help fast. ✅ Real-time support ✅ Certified QuickBooks experts ✅ 100% U.S.-based support ✅ No waiting--live agents on call Just call 1-855-219-0007 anytime--our agents are trained to assist with setup, installation, payroll, multi-user issues, and any technical errors that may arise. Common Issues We Can Help With 🔧 When you are stuck, time is money. Our QuickBooks® Enterprise™ specialists can walk you through even the most complex problems. Call us now at 1-855-219-0007 for help with: 🛠️ Error codes like H202, 6000 series, or 6177 🧾 Company file not opening or loading 🔄 Data sync and backup issues 👥 Multi-user mode configuration problems 💰 Payroll setup or tax form errors 📊 Custom reports or chart of accounts Whether it is a small bug or a major crash, just call 1-855-219-0007 and get back to business quickly. Available 24/7 – Even on Weekends and Holidays 🕒 Many business owners work after hours or need help outside of 9 to 5. That is why our QuickBooks® Enterprise™ Support Line (1-855-219-0007) never closes. We are open 24 hours a day, 7 days a week--including weekends and holidays! 🌙 Working late? Call us. 🎄 It is a holiday? We are still here. 🚨 Emergency? We will pick up. It is like having your own IT department, just a phone call away--1-855-219-0007. Live Help from Certified Experts 👨‍💻👩‍💻 Not all support is created equal. When you call 1-855-219-0007, you are speaking with professionals who are: ✔️ Intuit Certified ProAdvisors ✔️ Highly trained in QuickBooks® Enterprise™ ✔️ Experienced in handling business accounting for all industries ✔️ Friendly, patient, and clear communicators We do not read from scripts. We solve real problems with real people--fast. Remote Assistance Available 🔐 Some problems need hands-on troubleshooting. We offer secure remote support--with your permission--so our experts can access your system and fix the issue in real time. All you need to do is call 1-855-219-0007, and we will guide you step-by-step. Your data is safe and confidential--always protected under strict security protocols. 🔒 Get Help Now – Do not Wait! 🚀 When QuickBooks® Enterprise™ stops working, your workflow stalls. That is why you should not wait hours or search forums for answers. Get direct access to our support team now by calling: 📞 1-855-219-0007 Do not let technical issues slow you down. Our friendly agents are available day or night to get you back on track--usually within minutes. Who Can Call This Support Line? 📣 This support service is perfect for: ✅ Small to mid-size businesses ✅ Accountants and bookkeepers ✅ Enterprise-level organizations ✅ First-time QuickBooks users ✅ Long-time users with new errors If you are using QuickBooks® Enterprise™, this number is for you: 1-855-219-0007. Do not Risk Losing Data or Time – Call Now! ⏳ Even minor issues in QuickBooks can lead to hours of lost time or incorrect financials. Whether you are experiencing performance lags, crashing software, or user access issues, do not try to fix it alone. Instead, call the experts at 1-855-219-0007--your trusted QuickBooks® Enterprise™ Support directory. We will diagnose and resolve the problem, often on the first call. 📞 Call Now: 1-855-219-0007 – QuickBooks® Enterprise™ Support You Can Trust! Let us handle the stress while you focus on growing your business. Fast. Friendly. 24/7. Qu!ckB00ks helpline Qu!ckB00ks support contact Qu!ckB00ks customer care Qu!ckB00ks phone support Qu!ckB00ks support email Qu!ckB00ks live chat Qu!ckB00ks help desk Qu!ckB00ks contact support Qu!ckB00ks support team Qu!ckB00ks customer assistance Qu!ckB00ks service hotline Qu!ckB00ks technical support Qu!ckB00ks issue resolution Qu!ckB00ks account help Qu!ckB00ks payment support Qu!ckB00ks withdrawal issues Qu!ckB00ks login help Qu!ckB00ks verification support Qu!ckB00ks account recovery Qu!ckB00ks lost access Qu!ckB00ks security issues Qu!ckB00ks fraud support Qu!ckB00ks billing support Qu!ckB00ks transaction problems Qu!ckB00ks support Qu!ckB00ks wallet issues Qu!ckB00ks mobile app support Qu!ckB00ks crypto transfer help Qu!ckB00ks error fixing Qu!ckB00ks support login Qu!ckB00ks problem resolution Qu!ckB00ks feedback contact Qu!ckB00ks account suspension help Qu!ckB00ks withdrawal delay Qu!ckB00ks deposit issues Qu!ckB00ks crypto conversion help Qu!ckB00ks order status Qu!ckB00ks refund support Qu!ckB00ks tax document support Qu!ckB00ks international support Qu!ckB00ks 24/7 support Qu!ckB00ks account settings help Qu!ckB00ks password reset Qu!ckB00ks two-factor authentication help Qu!ckB00ks customer inquiry Qu!ckB00ks support number USA Qu!ckB00ks help center phone number

1 week, 6 days

1
0
0 0

1_855-219-0007 𝓛𝓲𝓿𝓮 𝓠𝓾!𝓬𝓴𝓑00𝓴𝓼® 𝓔𝓷𝓽𝓮𝓻𝓹𝓻𝓲𝓼𝓮™ 𝓢𝓾𝓹𝓹0𝓻𝓽 – 𝓕𝓾𝓵𝓵 24/7 𝓗𝓮𝓵𝓹𝓵𝓲𝓷𝓮 𝓓𝓲𝓻𝓮𝓬𝓽𝓸𝓻𝔂

by penelopemorrison＠xutin.org

📞 𝖢𝖺𝗅𝗅 24/7 𝖰𝗎𝗂𝖼𝗄𝖡𝗈𝗈𝗄𝗌® 𝖤𝗇𝗍𝖾𝗋𝗉𝗋𝗂𝗌𝖾™ 𝖲𝗎𝗉𝗉𝗈𝗋𝗍: 1-855-219-0007 𝖠𝗋𝖾 𝗒𝗈𝗎 𝖿𝖺𝖼𝗂𝗇𝗀 𝗂𝗌𝗌𝗎𝖾𝗌 𝗐𝗂𝗍𝗁 𝖰𝗎𝗂𝖼𝗄𝖡𝗈𝗈𝗄𝗌® 𝖤𝗇𝗍𝖾𝗋𝗉𝗋𝗂𝗌𝖾™ 𝖺𝗇𝖽 𝗇𝖾𝖾𝖽 𝗂𝗆𝗆𝖾𝖽𝗂𝖺𝗍𝖾 𝖺𝗌𝗌𝗂𝗌𝗍𝖺𝗇𝖼𝖾? 𝖣𝗈 𝗇𝗈𝗍 𝗐𝗈𝗋𝗋𝗒--𝗁𝖾𝗅𝗉 𝗂𝗌 𝗃𝗎𝗌𝗍 𝖺 𝗉𝗁𝗈𝗇𝖾 𝖼𝖺𝗅𝗅 𝖺𝗐𝖺𝗒! 𝖮𝗎𝗋 24/7 𝖰𝗎𝗂𝖼𝗄𝖡𝗈𝗈𝗄𝗌® 𝖤𝗇𝗍𝖾𝗋𝗉𝗋𝗂𝗌𝖾™ 𝖲𝗎𝗉𝗉𝗈𝗋𝗍 𝗂𝗌 𝖺𝗏𝖺𝗂𝗅𝖺𝖻𝗅𝖾 𝖺𝗍 1-855-219-0007, 𝗋𝖾𝖺𝖽𝗒 𝗍𝗈 𝗁𝖾𝗅𝗉 𝗒𝗈𝗎 𝗋𝖾𝗌𝗈𝗅𝗏𝖾 𝖺𝗇𝗒 𝖺𝖼𝖼𝗈𝗎𝗇𝗍𝗂𝗇𝗀 𝗈𝗋 𝗍𝖾𝖼𝗁𝗇𝗂𝖼𝖺𝗅 𝗂𝗌𝗌𝗎𝖾𝗌 𝖺𝗋𝗈𝗎𝗇𝖽 𝗍𝗁𝖾 𝖼𝗅𝗈𝖼𝗄. 𝖶𝗁𝖾𝗍𝗁𝖾𝗋 𝗂𝗍 𝗂𝗌 𝗅𝖺𝗍𝖾 𝖺𝗍 𝗇𝗂𝗀𝗁𝗍, 𝖾𝖺𝗋𝗅𝗒 𝗆𝗈𝗋𝗇𝗂𝗇𝗀, 𝗈𝗋 𝖽𝗎𝗋𝗂𝗇𝗀 𝖺 𝗁𝗈𝗅𝗂𝖽𝖺𝗒, 𝗈𝗎𝗋 𝖾𝗑𝗉𝖾𝗋𝗍 𝗍𝖾𝖺𝗆 𝗂𝗌 𝗌𝗍𝖺𝗇𝖽𝗂𝗇𝗀 𝖻𝗒 𝗍𝗈 𝗉𝗋𝗈𝗏𝗂𝖽𝖾 𝖿𝖺𝗌𝗍, 𝖿𝗋𝗂𝖾𝗇𝖽𝗅𝗒 𝗌𝗎𝗉𝗉𝗈𝗋𝗍. 𝖶𝗁𝗒 𝖢𝖺𝗅𝗅 24/7 𝖰𝗎𝗂𝖼𝗄𝖡𝗈𝗈𝗄𝗌® 𝖤𝗇𝗍𝖾𝗋𝗉𝗋𝗂𝗌𝖾™ 𝖲𝗎𝗉𝗉𝗈𝗋𝗍? 📈 𝖰𝗎𝗂𝖼𝗄𝖡𝗈𝗈𝗄𝗌® 𝖤𝗇𝗍𝖾𝗋𝗉𝗋𝗂𝗌𝖾™ 𝗂𝗌 𝖺 𝗉𝗈𝗐𝖾𝗋𝖿𝗎𝗅 𝖺𝖼𝖼𝗈𝗎𝗇𝗍𝗂𝗇𝗀 𝗌𝗈𝗅𝗎𝗍𝗂𝗈𝗇 𝗎𝗌𝖾𝖽 𝖻𝗒 𝗍𝗁𝗈𝗎𝗌𝖺𝗇𝖽𝗌 𝗈𝖿 𝖻𝗎𝗌𝗂𝗇𝖾𝗌𝗌𝖾𝗌 𝖺𝖼𝗋𝗈𝗌𝗌 𝗍𝗁𝖾 𝖴.𝖲. 𝖡𝗎𝗍 𝖾𝗏𝖾𝗇 𝗍𝗁𝖾 𝗆𝗈𝗌𝗍 𝗋𝗈𝖻𝗎𝗌𝗍 𝗌𝗈𝖿𝗍𝗐𝖺𝗋𝖾 𝖼𝖺𝗇 𝗋𝗎𝗇 𝗂𝗇𝗍𝗈 𝗈𝖼𝖼𝖺𝗌𝗂𝗈𝗇𝖺𝗅 𝗁𝗂𝖼𝖼𝗎𝗉𝗌--𝖺𝗇𝖽 𝗐𝗁𝖾𝗇 𝗂𝗍 𝖽𝗈𝖾𝗌, 𝗒𝗈𝗎 𝗇𝖾𝖾𝖽 𝗁𝖾𝗅𝗉 𝖿𝖺𝗌𝗍. ✅ 𝖱𝖾𝖺𝗅-𝗍𝗂𝗆𝖾 𝗌𝗎𝗉𝗉𝗈𝗋𝗍 ✅ 𝖢𝖾𝗋𝗍𝗂𝖿𝗂𝖾𝖽 𝖰𝗎𝗂𝖼𝗄𝖡𝗈𝗈𝗄𝗌 𝖾𝗑𝗉𝖾𝗋𝗍𝗌 ✅ 100% 𝖴.𝖲.-𝖻𝖺𝗌𝖾𝖽 𝗌𝗎𝗉𝗉𝗈𝗋𝗍 ✅ 𝖭𝗈 𝗐𝖺𝗂𝗍𝗂𝗇𝗀--𝗅𝗂𝗏𝖾 𝖺𝗀𝖾𝗇𝗍𝗌 𝗈𝗇 𝖼𝖺𝗅𝗅 𝖩𝗎𝗌𝗍 𝖼𝖺𝗅𝗅 1-855-219-0007 𝖺𝗇𝗒𝗍𝗂𝗆𝖾--𝗈𝗎𝗋 𝖺𝗀𝖾𝗇𝗍𝗌 𝖺𝗋𝖾 𝗍𝗋𝖺𝗂𝗇𝖾𝖽 𝗍𝗈 𝖺𝗌𝗌𝗂𝗌𝗍 𝗐𝗂𝗍𝗁 𝗌𝖾𝗍𝗎𝗉, 𝗂𝗇𝗌𝗍𝖺𝗅𝗅𝖺𝗍𝗂𝗈𝗇, 𝗉𝖺𝗒𝗋𝗈𝗅𝗅, 𝗆𝗎𝗅𝗍𝗂-𝗎𝗌𝖾𝗋 𝗂𝗌𝗌𝗎𝖾𝗌, 𝖺𝗇𝖽 𝖺𝗇𝗒 𝗍𝖾𝖼𝗁𝗇𝗂𝖼𝖺𝗅 𝖾𝗋𝗋𝗈𝗋𝗌 𝗍𝗁𝖺𝗍 𝗆𝖺𝗒 𝖺𝗋𝗂𝗌𝖾.

1 week, 6 days

1
0
0 0

[PATCH v2 04/20] ASoC: qcom: q6asm-dai: perform correct state check before closing

by Srinivas Kandagatla

Do not stop a q6asm stream if its not started, this can result in unnecessary dsp command which will timeout anyway something like below: q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout Fix this by correctly checking the state. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: <Stable(a)vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov(a)linaro.org> # RB5, RB3 --- sound/soc/qcom/qdsp6/q6asm-dai.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index e8129510a734..0eae8c6e42b8 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -233,13 +233,14 @@ static int q6asm_dai_prepare(struct snd_soc_component *component, prtd->pcm_count = snd_pcm_lib_period_bytes(substream); prtd->pcm_irq_pos = 0; /* rate and channels are sent to audio driver */ - if (prtd->state) { + if (prtd->state == Q6ASM_STREAM_RUNNING) { /* clear the previous setup if any */ q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); q6routing_stream_close(soc_prtd->dai_link->id, substream->stream); + prtd->state = Q6ASM_STREAM_STOPPED; } ret = q6asm_map_memory_regions(substream->stream, prtd->audio_client, -- 2.51.0

1 week, 6 days

1
0
0 0

[PATCH v2 03/20] ASoC: qcom: qdsp6: q6asm-dai: set 10 ms period and buffer alignment.

by Srinivas Kandagatla

DSP expects the periods to be aligned to fragment sizes, currently setting up to hw constriants on periods bytes is not going to work correctly as we can endup with periods sizes aligned to 32 bytes however not aligned to fragment size. Update the constriants to use fragment size, and also set at step of 10ms for period size to accommodate DSP requirements of 10ms latency. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: <Stable(a)vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov(a)linaro.org> # RB5, RB3 --- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index b616ce316d2f..e8129510a734 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -403,13 +403,13 @@ static int q6asm_dai_open(struct snd_soc_component *component, } ret = snd_pcm_hw_constraint_step(runtime, 0, - SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32); + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 480); if (ret < 0) { dev_err(dev, "constraint for period bytes step ret = %d\n", ret); } ret = snd_pcm_hw_constraint_step(runtime, 0, - SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32); + SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 480); if (ret < 0) { dev_err(dev, "constraint for buffer bytes step ret = %d\n", ret); -- 2.51.0

1 week, 6 days

1
0
0 0

[PATCH v2 02/20] ASoC: qcom: q6adm: the the copp device only during last instance

by Srinivas Kandagatla

A matching Common object post processing instance is normally resused across multiple streams. However currently we close this on DSP even though there is a refcount on this copp object, this can result in below error. q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0 qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2 q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2] q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0 qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2 q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2] qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2 qcom-q6adm aprsvc:service:4:8: DSP returned error[2] qcom-q6adm aprsvc:service:4:8: Failed to close copp -22 qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2 qcom-q6adm aprsvc:service:4:8: DSP returned error[2] qcom-q6adm aprsvc:service:4:8: Failed to close copp -22 Fix this by addressing moving the adm_close to copp_kref destructor callback. Fixes: 7b20b2be51e1 ("ASoC: qdsp6: q6adm: Add q6adm driver") Cc: <Stable(a)vger.kernel.org> Reported-by: Martino Facchin <m.facchin(a)arduino.cc> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov(a)linaro.org> # RB5, RB3 --- sound/soc/qcom/qdsp6/q6adm.c | 146 +++++++++++++++++------------------ 1 file changed, 71 insertions(+), 75 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6adm.c b/sound/soc/qcom/qdsp6/q6adm.c index 1530e98df165..75a029a696ac 100644 --- a/sound/soc/qcom/qdsp6/q6adm.c +++ b/sound/soc/qcom/qdsp6/q6adm.c @@ -109,11 +109,75 @@ static struct q6copp *q6adm_find_copp(struct q6adm *adm, int port_idx, } +static int q6adm_apr_send_copp_pkt(struct q6adm *adm, struct q6copp *copp, + struct apr_pkt *pkt, uint32_t rsp_opcode) +{ + struct device *dev = adm->dev; + uint32_t opcode = pkt->hdr.opcode; + int ret; + + mutex_lock(&adm->lock); + copp->result.opcode = 0; + copp->result.status = 0; + ret = apr_send_pkt(adm->apr, pkt); + if (ret < 0) { + dev_err(dev, "Failed to send APR packet\n"); + ret = -EINVAL; + goto err; + } + + /* Wait for the callback with copp id */ + if (rsp_opcode) + ret = wait_event_timeout(copp->wait, + (copp->result.opcode == opcode) || + (copp->result.opcode == rsp_opcode), + msecs_to_jiffies(TIMEOUT_MS)); + else + ret = wait_event_timeout(copp->wait, + (copp->result.opcode == opcode), + msecs_to_jiffies(TIMEOUT_MS)); + + if (!ret) { + dev_err(dev, "ADM copp cmd timedout\n"); + ret = -ETIMEDOUT; + } else if (copp->result.status > 0) { + dev_err(dev, "DSP returned error[%d]\n", + copp->result.status); + ret = -EINVAL; + } + +err: + mutex_unlock(&adm->lock); + return ret; +} + +static int q6adm_device_close(struct q6adm *adm, struct q6copp *copp, + int port_id, int copp_idx) +{ + struct apr_pkt close; + + close.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, + APR_HDR_LEN(APR_HDR_SIZE), + APR_PKT_VER); + close.hdr.pkt_size = sizeof(close); + close.hdr.src_port = port_id; + close.hdr.dest_port = copp->id; + close.hdr.token = port_id << 16 | copp_idx; + close.hdr.opcode = ADM_CMD_DEVICE_CLOSE_V5; + + return q6adm_apr_send_copp_pkt(adm, copp, &close, 0); +} + static void q6adm_free_copp(struct kref *ref) { struct q6copp *c = container_of(ref, struct q6copp, refcount); struct q6adm *adm = c->adm; unsigned long flags; + int ret; + + ret = q6adm_device_close(adm, c, c->afe_port, c->copp_idx); + if (ret < 0) + dev_err(adm->dev, "Failed to close copp %d\n", ret); spin_lock_irqsave(&adm->copps_list_lock, flags); clear_bit(c->copp_idx, &adm->copp_bitmap[c->afe_port]); @@ -155,13 +219,13 @@ static int q6adm_callback(struct apr_device *adev, struct apr_resp_pkt *data) switch (result->opcode) { case ADM_CMD_DEVICE_OPEN_V5: case ADM_CMD_DEVICE_CLOSE_V5: - copp = q6adm_find_copp(adm, port_idx, copp_idx); - if (!copp) - return 0; - - copp->result = *result; - wake_up(&copp->wait); - kref_put(&copp->refcount, q6adm_free_copp); + list_for_each_entry(copp, &adm->copps_list, node) { + if ((port_idx == copp->afe_port) && (copp_idx == copp->copp_idx)) { + copp->result = *result; + wake_up(&copp->wait); + break; + } + } break; case ADM_CMD_MATRIX_MAP_ROUTINGS_V5: adm->result = *result; @@ -234,65 +298,6 @@ static struct q6copp *q6adm_alloc_copp(struct q6adm *adm, int port_idx) return c; } -static int q6adm_apr_send_copp_pkt(struct q6adm *adm, struct q6copp *copp, - struct apr_pkt *pkt, uint32_t rsp_opcode) -{ - struct device *dev = adm->dev; - uint32_t opcode = pkt->hdr.opcode; - int ret; - - mutex_lock(&adm->lock); - copp->result.opcode = 0; - copp->result.status = 0; - ret = apr_send_pkt(adm->apr, pkt); - if (ret < 0) { - dev_err(dev, "Failed to send APR packet\n"); - ret = -EINVAL; - goto err; - } - - /* Wait for the callback with copp id */ - if (rsp_opcode) - ret = wait_event_timeout(copp->wait, - (copp->result.opcode == opcode) || - (copp->result.opcode == rsp_opcode), - msecs_to_jiffies(TIMEOUT_MS)); - else - ret = wait_event_timeout(copp->wait, - (copp->result.opcode == opcode), - msecs_to_jiffies(TIMEOUT_MS)); - - if (!ret) { - dev_err(dev, "ADM copp cmd timedout\n"); - ret = -ETIMEDOUT; - } else if (copp->result.status > 0) { - dev_err(dev, "DSP returned error[%d]\n", - copp->result.status); - ret = -EINVAL; - } - -err: - mutex_unlock(&adm->lock); - return ret; -} - -static int q6adm_device_close(struct q6adm *adm, struct q6copp *copp, - int port_id, int copp_idx) -{ - struct apr_pkt close; - - close.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, - APR_HDR_LEN(APR_HDR_SIZE), - APR_PKT_VER); - close.hdr.pkt_size = sizeof(close); - close.hdr.src_port = port_id; - close.hdr.dest_port = copp->id; - close.hdr.token = port_id << 16 | copp_idx; - close.hdr.opcode = ADM_CMD_DEVICE_CLOSE_V5; - - return q6adm_apr_send_copp_pkt(adm, copp, &close, 0); -} - static struct q6copp *q6adm_find_matching_copp(struct q6adm *adm, int port_id, int topology, int mode, int rate, @@ -567,15 +572,6 @@ EXPORT_SYMBOL_GPL(q6adm_matrix_map); */ int q6adm_close(struct device *dev, struct q6copp *copp) { - struct q6adm *adm = dev_get_drvdata(dev->parent); - int ret = 0; - - ret = q6adm_device_close(adm, copp, copp->afe_port, copp->copp_idx); - if (ret < 0) { - dev_err(adm->dev, "Failed to close copp %d\n", ret); - return ret; - } - kref_put(&copp->refcount, q6adm_free_copp); return 0; -- 2.51.0

1 week, 6 days

1
0
0 0

[PATCH v2 01/20] ASoC: qcom: q6apm-dai: set flags to reflect correct operation of appl_ptr

by Srinivas Kandagatla

Driver does not expect the appl_ptr to move backward and requires explict sync. Make sure that the userspace does not do appl_ptr rewinds by specifying the correct flags in pcm_info. Without this patch, the result could be a forever loop as current logic assumes that appl_ptr can only move forward. Fixes: 3d4a4411aa8b ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs") Cc: <Stable(a)vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov(a)linaro.org> # RB5, RB3 --- sound/soc/qcom/qdsp6/q6apm-dai.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c index 4ecaff45c518..786ab3222515 100644 --- a/sound/soc/qcom/qdsp6/q6apm-dai.c +++ b/sound/soc/qcom/qdsp6/q6apm-dai.c @@ -86,6 +86,7 @@ static const struct snd_pcm_hardware q6apm_dai_hardware_capture = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | + SNDRV_PCM_INFO_NO_REWINDS | SNDRV_PCM_INFO_SYNC_APPLPTR | SNDRV_PCM_INFO_BATCH), .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE), .rates = SNDRV_PCM_RATE_8000_48000, @@ -105,6 +106,7 @@ static const struct snd_pcm_hardware q6apm_dai_hardware_playback = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | + SNDRV_PCM_INFO_NO_REWINDS | SNDRV_PCM_INFO_SYNC_APPLPTR | SNDRV_PCM_INFO_BATCH), .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE), .rates = SNDRV_PCM_RATE_8000_192000, -- 2.51.0

1 week, 6 days

1
0
0 0

[RFT PATCH] mfd: max77620: Fix potential IRQ chip conflict when probing two devices

by Krzysztof Kozlowski

MAX77620 is most likely always a single device on the board, however nothing stops board designers to have two of them, thus same device driver could probe twice. Or user could manually try to probing second time. Device driver is not ready for that case, because it allocates statically 'struct regmap_irq_chip' as non-const and stores during probe in 'irq_drv_data' member a pointer to per-probe state container ('struct max77620_chip'). devm_regmap_add_irq_chip() does not make a copy of 'struct regmap_irq_chip' but store the pointer. Second probe - either successful or failure - would overwrite the 'irq_drv_data' from previous device probe, so interrupts would be executed in a wrong context. Fixes: 3df140d11c6d ("mfd: max77620: Mask/unmask interrupt before/after servicing it") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Not tested on hardware --- drivers/mfd/max77620.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c index 21d2ab3db254..3af2974b3023 100644 --- a/drivers/mfd/max77620.c +++ b/drivers/mfd/max77620.c @@ -254,7 +254,7 @@ static int max77620_irq_global_unmask(void *irq_drv_data) return ret; } -static struct regmap_irq_chip max77620_top_irq_chip = { +static const struct regmap_irq_chip max77620_top_irq_chip = { .name = "max77620-top", .irqs = max77620_top_irqs, .num_irqs = ARRAY_SIZE(max77620_top_irqs), @@ -498,6 +498,7 @@ static int max77620_probe(struct i2c_client *client) const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct regmap_config *rmap_config; struct max77620_chip *chip; + struct regmap_irq_chip *chip_desc; const struct mfd_cell *mfd_cells; int n_mfd_cells; bool pm_off; @@ -508,6 +509,14 @@ static int max77620_probe(struct i2c_client *client) return -ENOMEM; i2c_set_clientdata(client, chip); + + chip_desc = devm_kmemdup(&client->dev, &max77620_top_irq_chip, + sizeof(max77620_top_irq_chip), + GFP_KERNEL); + if (!chip_desc) + return -ENOMEM; + chip_desc->irq_drv_data = chip; + chip->dev = &client->dev; chip->chip_irq = client->irq; chip->chip_id = (enum max77620_chip_id)id->driver_data; @@ -544,11 +553,9 @@ static int max77620_probe(struct i2c_client *client) if (ret < 0) return ret; - max77620_top_irq_chip.irq_drv_data = chip; ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq, IRQF_ONESHOT | IRQF_SHARED, 0, - &max77620_top_irq_chip, - &chip->top_irq_data); + chip_desc, &chip->top_irq_data); if (ret < 0) { dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret); return ret; -- 2.48.1

1 week, 6 days

1
0
0 0

[PATCH RFC 0/2] ASoC: codecs: pm4125: Two minor fixes for potential issues

by Krzysztof Kozlowski

I marked these as fixes, but the issue is not likely to trigger in normal conditions. Not tested on hardware, please kindly provide tested-by, the best with some probe bind/unbind cycle. Best regards, Krzysztof --- Krzysztof Kozlowski (2): ASoC: codecs: pm4125: Fix potential conflict when probing two devices ASoC: codecs: pm4125: Remove irq_chip on component unbind sound/soc/codecs/pm4125.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) --- base-commit: d22122bd89bc5ce7b3e057d99679ca50a72a8245 change-id: 20251023-asoc-regmap-irq-chip-bb2053c32168 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

1 week, 6 days

1
3
0 0

FAILED: patch "[PATCH] dm: fix NULL pointer dereference in __dm_suspend()" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 8d33a030c566e1f105cd5bf27f37940b6367f3be # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101316-favored-pulsate-a811@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8d33a030c566e1f105cd5bf27f37940b6367f3be Mon Sep 17 00:00:00 2001 From: Zheng Qixing <zhengqixing(a)huawei.com> Date: Tue, 26 Aug 2025 15:42:04 +0800 Subject: [PATCH] dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. Fixes: c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion") Cc: stable(a)vger.kernel.org Signed-off-by: Zheng Qixing <zhengqixing(a)huawei.com> Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 7222f20c1a83..66dd5f6ce778 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2908,7 +2908,7 @@ static int __dm_suspend(struct mapped_device *md, struct dm_table *map, { bool do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG; bool noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG; - int r; + int r = 0; lockdep_assert_held(&md->suspend_lock); @@ -2960,7 +2960,7 @@ static int __dm_suspend(struct mapped_device *md, struct dm_table *map, * Stop md->queue before flushing md->wq in case request-based * dm defers requests to md->wq from md->queue. */ - if (dm_request_based(md)) { + if (map && dm_request_based(md)) { dm_stop_queue(md->queue); set_bit(DMF_QUEUE_STOPPED, &md->flags); } @@ -2972,7 +2972,8 @@ static int __dm_suspend(struct mapped_device *md, struct dm_table *map, * We call dm_wait_for_completion to wait for all existing requests * to finish. */ - r = dm_wait_for_completion(md, task_state); + if (map) + r = dm_wait_for_completion(md, task_state); if (!r) set_bit(dmf_suspended_flag, &md->flags);

1 week, 6 days

5
12
0 0

[PATCH] usb: renesas_usbhs: Fix synchronous external abort on unbind

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1 The issue occurs because usbhs_sys_function_pullup(), which accesses the IP registers, is executed after the USBHS clocks have been disabled. The problem is reproducible on the Renesas RZ/G3S SoC starting with the addition of module stop in the clock enable/disable APIs. With module stop functionality enabled, a bus error is expected if a master accesses a module whose clock has been stopped and module stop activated. Disable the IP clocks at the end of remove. Cc: stable(a)vger.kernel.org Fixes: f1407d5c6624 ("usb: renesas_usbhs: Add Renesas USBHS common code") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Patch was tested with continuous unbind/bind and the configuration sequence described above on the devices with the following device trees: - r8a774a1-hihope-rzg2m-ex.dts - r8a774b1-hihope-rzg2n-ex.dts - r8a774e1-hihope-rzg2h-ex.dts - r9a07g043u11-smarc.dts - r9a07g044c2-smarc.dts - r9a07g044l2-smarc.dts - r9a07g054l2-smarc.dts drivers/usb/renesas_usbhs/common.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8f536f2c500f..b8b55d08ac52 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -813,18 +813,18 @@ static void usbhs_remove(struct platform_device *pdev) flush_delayed_work(&priv->notify_hotplug_work); - /* power off */ - if (!usbhs_get_dparam(priv, runtime_pwctrl)) - usbhsc_power_ctrl(priv, 0); - - pm_runtime_disable(&pdev->dev); - usbhs_platform_call(priv, hardware_exit, pdev); usbhsc_clk_put(priv); reset_control_assert(priv->rsts); usbhs_mod_remove(priv); usbhs_fifo_remove(priv); usbhs_pipe_remove(priv); + + /* power off */ + if (!usbhs_get_dparam(priv, runtime_pwctrl)) + usbhsc_power_ctrl(priv, 0); + + pm_runtime_disable(&pdev->dev); } static int usbhsc_suspend(struct device *dev) -- 2.43.0

1 week, 6 days

3
2
0 0

[PATCH 5.15 000/276] 5.15.195-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.195 release. There are 276 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sun, 19 Oct 2025 14:50:59 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.195-r… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 5.15.195-rc1 Matthieu Baerts (NGI0) <matttbe(a)kernel.org> selftests: mptcp: join: validate C-flag + def limit Matthieu Baerts (NGI0) <matttbe(a)kernel.org> mptcp: pm: in-kernel: usable client side with C-flag Dan Carpenter <dan.carpenter(a)linaro.org> mm/slab: make __free(kfree) accept error pointers Mikhail Kobuk <m.kobuk(a)ispras.ru> media: pci: ivtv: Add check for DMA map result Jason Andryuk <jason.andryuk(a)amd.com> xen/events: Update virq_to_irq on migration Thomas Fourier <fourier.thomas(a)gmail.com> media: pci: ivtv: Add missing check after DMA map Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> media: pci/ivtv: switch from 'pci_' to 'dma_' API Catalin Marinas <catalin.marinas(a)arm.com> arm64: mte: Do not flag the zero page as PG_mte_tagged Thomas Fourier <fourier.thomas(a)gmail.com> media: cx18: Add missing check after DMA map Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> media: switch from 'pci_' to 'dma_' API Jan Kara <jack(a)suse.cz> writeback: Avoid excessively long inode switching times Jan Kara <jack(a)suse.cz> writeback: Avoid softlockup when switching many inodes Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> cramfs: Verify inode mode when loading from disk Lichen Liu <lichliu(a)redhat.com> fs: Add 'initramfs_options' to set initramfs mount options Oleg Nesterov <oleg(a)redhat.com> pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers gaoxiang17 <gaoxiang17(a)xiaomi.com> pid: Add a judgment for ns null in pid_nr_ns Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> minixfs: Verify inode mode when loading from disk David Laight <David.Laight(a)ACULAB.COM> minmax.h: remove some #defines that are only expanded once David Laight <David.Laight(a)ACULAB.COM> minmax.h: simplify the variants of clamp() David Laight <David.Laight(a)ACULAB.COM> minmax.h: move all the clamp() definitions after the min/max() ones David Laight <David.Laight(a)ACULAB.COM> minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp() David Laight <David.Laight(a)ACULAB.COM> minmax.h: reduce the #define expansion of min(), max() and clamp() David Laight <David.Laight(a)ACULAB.COM> minmax.h: update some comments David Laight <David.Laight(a)ACULAB.COM> minmax.h: add whitespace around operators and after commas Linus Torvalds <torvalds(a)linux-foundation.org> minmax: fix up min3() and max3() too Linus Torvalds <torvalds(a)linux-foundation.org> minmax: improve macro expansion and type checking Linus Torvalds <torvalds(a)linux-foundation.org> minmax: simplify min()/max()/clamp() implementation Linus Torvalds <torvalds(a)linux-foundation.org> minmax: don't use max() in situations that want a C constant expression Linus Torvalds <torvalds(a)linux-foundation.org> minmax: make generic MIN() and MAX() macros available everywhere Linus Torvalds <torvalds(a)linux-foundation.org> minmax: simplify and clarify min_t()/max_t() implementation Linus Torvalds <torvalds(a)linux-foundation.org> minmax: add a few more MIN_T/MAX_T users Linus Torvalds <torvalds(a)linux-foundation.org> minmax: avoid overly complicated constant expressions in VM code David Laight <David.Laight(a)ACULAB.COM> minmax: fix indentation of __cmp_once() and __clamp_once() Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> minmax: deduplicate __unconst_integer_typeof() Herve Codina <herve.codina(a)bootlin.com> minmax: Introduce {min,max}_array() Stephan Gerhold <stephan.gerhold(a)linaro.org> arm64: dts: qcom: sdm845: Fix slimbam num-channels/ees Qu Wenruo <wqu(a)suse.com> btrfs: fix the incorrect max_bytes value for find_lock_delalloc_range() Aleksa Sarai <cyphar(a)cyphar.com> fscontext: do not consume log entries when returning -EMSGSIZE Peter Zijlstra <peterz(a)infradead.org> locking: Introduce __cleanup() based infrastructure Zheng Qixing <zhengqixing(a)huawei.com> dm: fix NULL pointer dereference in __dm_suspend() Yuan Chen <chenyuan(a)kylinos.cn> tracing: Fix race condition in kprobe initialization causing NULL pointer dereference Matvey Kovalev <matvey.kovalev(a)ispras.ru> ksmbd: fix error code overwriting in smb2_get_info_filesystem() Oleksij Rempel <linux(a)rempel-privat.de> net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Hans de Goede <hansg(a)kernel.org> mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> mfd: intel_soc_pmic_chtdc_ti: Drop unneeded assignment for cache_type Hans de Goede <hdegoede(a)redhat.com> mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value Edward Adam Davis <eadavis(a)qq.com> media: mc: Clear minor number before put device Phillip Lougher <phillip(a)squashfs.org.uk> Squashfs: reject negative file sizes in squashfs_read_inode() Phillip Lougher <phillip(a)squashfs.org.uk> Squashfs: add additional inode sanity checking Ma Ke <make24(a)iscas.ac.cn> ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data() Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> ASoC: codecs: wcd934x: Simplify with dev_err_probe Sean Christopherson <seanjc(a)google.com> KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O Nathan Chancellor <nathan(a)kernel.org> lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older Jan Kara <jack(a)suse.cz> ext4: free orphan info with kvfree Ahmet Eray Karadag <eraykrdg1(a)gmail.com> ext4: guard against EA inode refcount underflow in xattr update Ojaswin Mujoo <ojaswin(a)linux.ibm.com> ext4: correctly handle queries for metadata mappings Yongjian Sun <sunyongjian1(a)huawei.com> ext4: increase i_disksize to offset + len in ext4_update_disksize_before_punch() Jan Kara <jack(a)suse.cz> ext4: verify orphan file size is not too big Olga Kornievskaia <okorniev(a)redhat.com> nfsd: nfserr_jukebox in nlm_fopen should lead to a retry Thorsten Blum <thorsten.blum(a)linux.dev> NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul() Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com> mm/page_alloc: only set ALLOC_HIGHATOMIC for __GPF_HIGH allocations Sean Christopherson <seanjc(a)google.com> x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases) Sean Christopherson <seanjc(a)google.com> x86/umip: Check that the instruction opcode is at least two bytes Pratyush Yadav <pratyush(a)kernel.org> spi: cadence-quadspi: Flush posted register writes before DAC access Pratyush Yadav <pratyush(a)kernel.org> spi: cadence-quadspi: Flush posted register writes before INDAC access Niklas Cassel <cassel(a)kernel.org> PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq() Siddharth Vadapalli <s-vadapalli(a)ti.com> PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit Lukas Wunner <lukas(a)wunner.de> PCI/AER: Support errors introduced by PCIe r6.0 Niklas Schnelle <schnelle(a)linux.ibm.com> PCI/AER: Fix missing uevent on recovery when a reset is requested Lukas Wunner <lukas(a)wunner.de> PCI/ERR: Fix uevent on failure to recover Niklas Schnelle <schnelle(a)linux.ibm.com> PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV Brian Norris <briannorris(a)google.com> PCI/sysfs: Ensure devices are powered for config reads Sean Christopherson <seanjc(a)google.com> rseq/selftests: Use weak symbol reference, not definition, to link with glibc Esben Haabendal <esben(a)geanix.com> rtc: interface: Fix long-standing race when setting alarm Esben Haabendal <esben(a)geanix.com> rtc: interface: Ensure alarm irq is enabled when UIE is enabled Zhen Ni <zhen.ni(a)easystack.cn> memory: samsung: exynos-srom: Fix of_iomap leak in exynos_srom_probe Rex Chen <rex.chen_1(a)nxp.com> mmc: core: SPI mode remove cmd7 Linus Walleij <linus.walleij(a)linaro.org> mtd: rawnand: fsmc: Default to autodetect buswidth Ma Ke <make24(a)iscas.ac.cn> sparc: fix error handling in scan_one_device() Anthony Yznaga <anthony.yznaga(a)oracle.com> sparc64: fix hugetlb for sun4u Eric Biggers <ebiggers(a)kernel.org> sctp: Fix MAC comparison to be constant-time Thorsten Blum <thorsten.blum(a)linux.dev> scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() Jisheng Zhang <jszhang(a)kernel.org> pwm: berlin: Fix wrong register in suspend/resume Nam Cao <namcao(a)linutronix.de> powerpc/pseries/msi: Fix potential underflow and leak issue Nam Cao <namcao(a)linutronix.de> powerpc/powernv/pci: Fix underflow and leak issue Georg Gottleuber <ggo(a)tuxedocomputers.com> nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk Sam James <sam(a)gentoo.org> parisc: don't reference obsolete termio struct for TC* constants Askar Safin <safinaskar(a)zohomail.com> openat2: don't trigger automounts with RESOLVE_NO_XDEV Johan Hovold <johan(a)kernel.org> lib/genalloc: fix device leak in of_gen_pool_get() Eric Biggers <ebiggers(a)kernel.org> KEYS: trusted_tpm1: Compare HMAC values in constant time Lu Baolu <baolu.lu(a)linux.intel.com> iommu/vt-d: PRS isn't usable if PDS isn't supported Sean Nyekjaer <sean(a)geanix.com> iio: imu: inv_icm42600: Drop redundant pm_runtime reinitialization in resume Huacai Chen <chenhuacai(a)kernel.org> init: handle bootloader identifier in kernel parameters Michael Hennerich <michael.hennerich(a)analog.com> iio: frequency: adf4350: Fix prescaler usage. Qianfeng Rong <rongqianfeng(a)vivo.com> iio: dac: ad5421: use int type to store negative error codes Qianfeng Rong <rongqianfeng(a)vivo.com> iio: dac: ad5360: use int type to store negative error codes Haoxiang Li <haoxiang_li2024(a)163.com> fs/ntfs3: Fix a resource leak bug in wnd_extend() Thomas Fourier <fourier.thomas(a)gmail.com> crypto: atmel - Fix dma_unmap_sg() direction Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request() Simon Schuster <schuster.simon(a)siemens-energy.com> copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64) Adam Xue <zxue(a)semtech.com> bus: mhi: host: Do not use uninitialized 'dev' pointer in mhi_init_irq_setup() Anderson Nascimento <anderson(a)allelesecurity.com> btrfs: avoid potential out-of-bounds in btrfs_encode_fh() Shuhao Fu <sfual(a)cse.ust.hk> drm/nouveau: fix bad ret code in nouveau_bo_move_prep Qianfeng Rong <rongqianfeng(a)vivo.com> media: i2c: mt9v111: fix incorrect type for ret Johan Hovold <johan(a)kernel.org> firmware: meson_sm: fix device leak at probe Lukas Wunner <lukas(a)wunner.de> xen/manage: Fix suspend error path Jason Andryuk <jason.andryuk(a)amd.com> xen/events: Cleanup find_virq() return codes Miaoqian Lin <linmq006(a)gmail.com> ARM: OMAP2+: pm33xx-core: ix device node reference leaks in amx3_idle_init Stephan Gerhold <stephan.gerhold(a)linaro.org> arm64: dts: qcom: msm8916: Add missing MDSS reset Amir Mohammad Jahangirzad <a.jahangirzad(a)gmail.com> ACPI: debug: fix signedness issues in read/write helpers Daniel Tang <danielzgtg.opensource(a)gmail.com> ACPI: TAD: Add missing sysfs_remove_group() for ACPI_TAD_RT KaFai Wan <kafai.wan(a)linux.dev> bpf: Avoid RCU context warning when unpinning htab with internal structs Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> gpio: wcd934x: mark the GPIO controller as sleeping Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells Gunnar Kudrjavets <gunnarku(a)amazon.com> tpm_tis: Fix incorrect arguments in tpm_tis_probe_irq_single Herbert Xu <herbert(a)gondor.apana.org.au> crypto: essiv - Check ssize for decryption and in-place encryption Eric Woudstra <ericwouds(a)gmail.com> bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu() Timur Kristóf <timur.kristof(a)gmail.com> drm/amd/display: Properly disable scaling on DCE6 Timur Kristóf <timur.kristof(a)gmail.com> drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6 Timur Kristóf <timur.kristof(a)gmail.com> drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: Add additional DCE6 SCL registers Daniel Borkmann <daniel(a)iogearbox.net> bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Harini T <harini.t(a)amd.com> mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes Harini T <harini.t(a)amd.com> mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call Leo Yan <leo.yan(a)arm.com> tools build: Align warning options with perf Erick Karanja <karanja99erick(a)gmail.com> net: fsl_pq_mdio: Fix device node reference leak in fsl_pq_mdio_probe Kuniyuki Iwashima <kuniyu(a)google.com> tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request(). Alexandr Sapozhnikov <alsp705(a)gmail.com> net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce() Ian Forbes <ian.forbes(a)broadcom.com> drm/vmwgfx: Fix Use-after-free in validation Thomas Zimmermann <tzimmermann(a)suse.de> drm/vmwgfx: Copy DRM hash-table code into driver Vineeth Vijayan <vneethv(a)linux.ibm.com> s390/cio: Update purge function to unregister the unused subchannels Vineeth Vijayan <vneethv(a)linux.ibm.com> s390/cio: unregister the subchannel while purging Dan Carpenter <dan.carpenter(a)linaro.org> net/mlx4: prevent potential use after free in mlx4_en_do_uc_filter() Duoming Zhou <duoming(a)zju.edu.cn> scsi: mvsas: Fix use-after-free bugs in mvs_work_queue John Garry <john.garry(a)huawei.com> scsi: mvsas: Use sas_task_find_rq() for tagging John Garry <john.garry(a)huawei.com> scsi: mvsas: Delete mvs_tag_init() John Garry <john.garry(a)huawei.com> scsi: libsas: Add sas_task_find_rq() Aaron Kling <webgeek1234(a)gmail.com> cpufreq: tegra186: Set target frequency for all cpus in policy Alok Tiwari <alok.a.tiwari(a)oracle.com> clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver Brian Masney <bmasney(a)redhat.com> clk: nxp: lpc18xx-cgu: convert from round_rate() to determine_rate() Ian Rogers <irogers(a)google.com> perf test: Don't leak workload gopipe in PERF_RECORD_* Leo Yan <leo.yan(a)arm.com> perf session: Fix handling when buffer exceeds 2 GiB Leo Yan <leo.yan(a)arm.com> perf arm_spe: Correct memory level for remote access Leo Yan <leo.yan(a)arm.com> perf arm-spe: Rename the common data source encoding German Gomez <german.gomez(a)arm.com> perf arm-spe: Refactor arm-spe to support operation packet type Jing Zhang <renyu.zj(a)linux.alibaba.com> perf arm-spe: augment the data source type with neoverse_spe list Leo Yan <leo.yan(a)arm.com> perf arm_spe: Correct setting remote access Ali Saidi <alisaidi(a)amazon.com> perf arm-spe: Use SPE data source for neoverse cores German Gomez <german.gomez(a)arm.com> perf arm-spe: Save context ID in record Rob Herring (Arm) <robh(a)kernel.org> rtc: x1205: Fix Xicor X1205 vendor prefix Yunseong Kim <ysk(a)kzalloc.com> perf util: Fix compression checks returning -1 as bool Brian Masney <bmasney(a)redhat.com> clk: at91: peripheral: fix return value Ian Rogers <irogers(a)google.com> libperf event: Ensure tracing data is multiple of 8 sized Ian Rogers <irogers(a)google.com> perf evsel: Avoid container_of on a NULL leader Michael Hennerich <michael.hennerich(a)analog.com> iio: frequency: adf4350: Fix ADF4350_REG3_12BIT_CLKDIV_MODE Zhen Ni <zhen.ni(a)easystack.cn> clocksource/drivers/clps711x: Fix resource leaks in error paths Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> fs: always return zero on success from replace_fd() Miaoqian Lin <linmq006(a)gmail.com> usb: cdns3: cdnsp-pci: remove redundant pci_disable_device() call Salah Triki <salah.triki(a)gmail.com> bus: fsl-mc: Check return value of platform_get_resource() Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> pinctrl: check the return value of pinmux_ops::get_function_name() Zhen Ni <zhen.ni(a)easystack.cn> Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak Marek Vasut <marek.vasut(a)mailbox.org> Input: atmel_mxt_ts - allow reset GPIO to sleep Guangshuo Li <lgs201920130244(a)gmail.com> nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe() Yang Shi <yang(a)os.amperecomputing.com> mm: hugetlb: avoid soft lockup when mprotect to large memory area Jan Kara <jack(a)suse.cz> ext4: fix checks for orphan inodes Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> mfd: vexpress-sysreg: Check the return value of devm_gpiochip_add_data() Deepak Sharma <deepak.sharma.472935(a)gmail.com> net: nfc: nci: Add parameter validation for packet data Larshin Sergey <Sergey.Larshin(a)kaspersky.com> fs: udf: fix OOB read in lengthAllocDescs handling Naman Jain <namjain(a)linux.microsoft.com> uio_hv_generic: Let userspace take care of interrupt mask Phillip Lougher <phillip(a)squashfs.org.uk> Squashfs: fix uninit-value in squashfs_get_parent Jakub Kicinski <kuba(a)kernel.org> Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set" Yeounsu Moon <yyyynoom(a)gmail.com> net: dlink: handle copy_thresh allocation failure Kohei Enju <enjuk(a)amazon.com> net: ena: return 0 in ena_get_rxfh_key_size() when RSS hash key is not configurable Kohei Enju <enjuk(a)amazon.com> nfp: fix RSS hash key size when RSS is not supported Donet Tom <donettom(a)linux.ibm.com> drivers/base/node: fix double free in register_one_node() Dan Carpenter <dan.carpenter(a)linaro.org> ocfs2: fix double free in user_cluster_connect() Nishanth Menon <nm(a)ti.com> hwrng: ks-sa - fix division by zero in ks_sa_rng_init Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Bluetooth: MGMT: Fix not exposing debug UUID on MGMT_OP_READ_EXP_FEATURES_INFO I Viswanath <viswanathiyyappan(a)gmail.com> net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast Bernard Metzler <bernard.metzler(a)linux.dev> RDMA/siw: Always report immediate post SQ errors Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> usb: vhci-hcd: Prevent suspending virtually attached devices Ranjan Kumar <ranjan.kumar(a)broadcom.com> scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() Slavin Liu <slavin452(a)gmail.com> ipvs: Defer ip_vs_ftp unregister during netns cleanup Anthony Iliopoulos <ailiop(a)suse.com> NFSv4.1: fix backchannel max_resp_sz verification check Leo Yan <leo.yan(a)arm.com> coresight: trbe: Return NULL pointer for allocation failures Stephan Gerhold <stephan.gerhold(a)linaro.org> remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice Michael Karcher <kernel(a)mkarcher.dialup.fu-berlin.de> sparc: fix accurate exception reporting in copy_{from,to}_user for M7 Michael Karcher <kernel(a)mkarcher.dialup.fu-berlin.de> sparc: fix accurate exception reporting in copy_to_user for Niagara 4 Michael Karcher <kernel(a)mkarcher.dialup.fu-berlin.de> sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara Michael Karcher <kernel(a)mkarcher.dialup.fu-berlin.de> sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III Michael Karcher <kernel(a)mkarcher.dialup.fu-berlin.de> sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC Baochen Qiang <baochen.qiang(a)oss.qualcomm.com> wifi: ath10k: avoid unnecessary wait for service ready message Bagas Sanjaya <bagasdotme(a)gmail.com> Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram Vlad Dumitrescu <vdumitrescu(a)nvidia.com> IB/sa: Fix sa_local_svc_timeout_ms read race Parav Pandit <parav(a)nvidia.com> RDMA/core: Resolve MAC of next-hop device without ARP support Michal Pecio <michal.pecio(a)gmail.com> Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running" Qianfeng Rong <rongqianfeng(a)vivo.com> scsi: qla2xxx: Fix incorrect sign of error code in START_SP_W_RETRIES() Qianfeng Rong <rongqianfeng(a)vivo.com> scsi: qla2xxx: edif: Fix incorrect sign of error code Colin Ian King <colin.i.king(a)gmail.com> ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message Abdun Nihaal <abdun.nihaal(a)gmail.com> wifi: mt76: fix potential memory leak in mt76_wmac_probe() Håkon Bugge <haakon.bugge(a)oracle.com> RDMA/cm: Rate limit destroy CM ID timeout error message Donet Tom <donettom(a)linux.ibm.com> drivers/base/node: handle error properly in register_one_node() Christophe Leroy <christophe.leroy(a)csgroup.eu> watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog Zhen Ni <zhen.ni(a)easystack.cn> netfilter: ipset: Remove unused htable_bits in macro ahash_region Hans de Goede <hansg(a)kernel.org> iio: consumers: Fix offset handling in iio_convert_raw_to_processed() Vitaly Grigoryev <Vitaly.Grigoryev(a)kaspersky.com> fs: ntfs3: Fix integer overflow in run_unpack() Takashi Iwai <tiwai(a)suse.de> ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping Takashi Iwai <tiwai(a)suse.de> ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mapping Takashi Iwai <tiwai(a)suse.de> ASoC: Intel: bytcht_es8316: Fix invalid quirk input mapping Wang Liang <wangliang74(a)huawei.com> pps: fix warning in pps_register_cdev when register device fail Colin Ian King <colin.i.king(a)gmail.com> misc: genwqe: Fix incorrect cmd field being reported in error William Wu <william.wu(a)rock-chips.com> usb: gadget: configfs: Correctly set use_os_string at bind Xichao Zhao <zhao.xichao(a)vivo.com> usb: phy: twl6030: Fix incorrect type for ret Qianfeng Rong <rongqianfeng(a)vivo.com> drm/amdkfd: Fix error code sign for EINVAL in svm_ioctl() Eric Dumazet <edumazet(a)google.com> tcp: fix __tcp_close() to only send RST when required Alok Tiwari <alok.a.tiwari(a)oracle.com> PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation Stefan Kerkmann <s.kerkmann(a)pengutronix.de> wifi: mwifiex: send world regulatory domain to driver Timur Kristóf <timur.kristof(a)gmail.com> drm/amdgpu: Power up UVD 3 for FW validation (v2) Qianfeng Rong <rongqianfeng(a)vivo.com> ALSA: lx_core: use int type to store negative error codes Zhang Shurong <zhang_shurong(a)foxmail.com> media: rj54n1cb0c: Fix memleak in rj54n1_probe() Thomas Fourier <fourier.thomas(a)gmail.com> scsi: myrs: Fix dma_alloc_coherent() error check Niklas Cassel <cassel(a)kernel.org> scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod Dan Carpenter <dan.carpenter(a)linaro.org> usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup Brahmajit Das <listout(a)listout.xyz> drm/radeon/r600_cs: clean up of dead code in r600_cs Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> i2c: designware: Add disabling clocks when probe fails Leilk.Liu <leilk.liu(a)mediatek.com> i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD Dmitry Baryshkov <dmitry.baryshkov(a)oss.qualcomm.com> thermal/drivers/qcom/lmh: Add missing IRQ includes Dmitry Baryshkov <dmitry.baryshkov(a)oss.qualcomm.com> thermal/drivers/qcom: Make LMH select QCOM_SCM Zhouyi Zhou <zhouzhouyi(a)gmail.com> tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> smp: Fix up and expand the smp_call_function_many() kerneldoc Paul Chaignon <paul.chaignon(a)gmail.com> bpf: Explicitly check accesses to bpf_sock_addr Akhilesh Patil <akhilesh(a)ee.iitb.ac.in> selftests: watchdog: skip ping loop if WDIOF_KEEPALIVEPING not supported Stanley Chu <stanley.chuys(a)gmail.com> i3c: master: svc: Recycle unused IBI slot Daniel Wagner <wagi(a)kernel.org> nvmet-fc: move lsop put work to nvmet_fc_ls_req_op Uwe Kleine-König <u.kleine-koenig(a)baylibre.com> pwm: tiehrpwm: Fix corner case in clock divisor calculation AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> arm64: dts: mediatek: mt8516-pumpkin: Fix machine compatible Johan Hovold <johan(a)kernel.org> firmware: firmware: meson-sm: fix compile-test default Qianfeng Rong <rongqianfeng(a)vivo.com> pinctrl: renesas: Use int type to store negative error codes Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> PM: sleep: core: Clear power.must_resume in noirq suspend error path Qianfeng Rong <rongqianfeng(a)vivo.com> block: use int to store blk_stack_limits() return value Qianfeng Rong <rongqianfeng(a)vivo.com> regulator: scmi: Use int type to store negative error codes Nicolas Ferre <nicolas.ferre(a)microchip.com> ARM: at91: pm: fix MCKx restore routine Li Nan <linan122(a)huawei.com> blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx Da Xue <da(a)libre.computer> pinctrl: meson-gxl: add missing i2c_d pinmux Sneh Mankad <sneh.mankad(a)oss.qualcomm.com> soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS Huisong Li <lihuisong(a)huawei.com> ACPI: processor: idle: Fix memory leak when register cpuidle device failed Florian Fainelli <florian.fainelli(a)broadcom.com> cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus() Yureka Lilian <yuka(a)yuka.dev> libbpf: Fix reuse of DEVMAP Geert Uytterhoeven <geert+renesas(a)glider.be> regmap: Remove superfluous check for !config in __regmap_init() Uros Bizjak <ubizjak(a)gmail.com> x86/vdso: Fix output operand size of RDPID Leo Yan <leo.yan(a)arm.com> perf: arm_spe: Prevent overflow in PERF_IDX2OFF() Leo Yan <leo.yan(a)arm.com> coresight: trbe: Prevent overflow in PERF_IDX2OFF() Bala-Vignesh-Reddy <reddybalavignesh9979(a)gmail.com> selftests: arm64: Check fread return value in exec_target Jeff Layton <jlayton(a)kernel.org> filelock: add FL_RECLAIM to show_fl_flags() macro Nalivayko Sergey <Sergey.Nalivayko(a)kaspersky.com> net/9p: fix double req put in p9_fd_cancelled Matthew Wilcox (Oracle) <willy(a)infradead.org> minmax: add in_range() macro Herbert Xu <herbert(a)gondor.apana.org.au> crypto: rng - Ensure set_ent is always present Hans de Goede <hdegoede(a)redhat.com> platform/x86: int3472: Check for adev == NULL Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> driver core/PM: Set power.no_callbacks along with power.no_pm Ovidiu Panait <ovidiu.panait.oss(a)gmail.com> staging: axis-fifo: flush RX FIFO on read errors Ovidiu Panait <ovidiu.panait.oss(a)gmail.com> staging: axis-fifo: fix maximum TX packet length check Raphael Gallais-Pou <raphael.gallais-pou(a)foss.st.com> serial: stm32: allow selecting console when the driver is module Arnaud Lecomte <contact(a)arnaud-lcm.com> hid: fix I2C read buffer overflow in raw_event() for mcp2221 hupu <hupu.gm(a)gmail.com> perf subcmd: avoid crash in exclude_cmds when excludes is empty Mikulas Patocka <mpatocka(a)redhat.com> dm-integrity: limit MAX_TAG_SIZE to 255 Bitterblue Smith <rtl8821cerfe2(a)gmail.com> wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188 Xiaowei Li <xiaowei.li(a)simcom.com> USB: serial: option: add SIMCom 8230C compositions Duoming Zhou <duoming(a)zju.edu.cn> media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe Duoming Zhou <duoming(a)zju.edu.cn> media: tuner: xc5000: Fix use-after-free in xc5000_release Ricardo Ribalda <ribalda(a)chromium.org> media: tunner: xc5000: Refactor firmware load Kuniyuki Iwashima <kuniyu(a)amazon.com> udp: Fix memory accounting leak. Will Deacon <will(a)kernel.org> KVM: arm64: Fix softirq masking in FPSIMD register saving sequence Larshin Sergey <Sergey.Larshin(a)kaspersky.com> media: rc: fix races with imon_disconnect() Duoming Zhou <duoming(a)zju.edu.cn> media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove Wang Haoran <haoranwangsec(a)gmail.com> scsi: target: target_core_configfs: Add length check to avoid buffer overflow Vasant Hegde <vasant.hegde(a)amd.com> iommu/amd: Add map/unmap_pages() iommu_domain_ops callback support ------------- Diffstat: Documentation/admin-guide/kernel-parameters.txt | 3 + Documentation/gpu/todo.rst | 11 + Documentation/trace/histogram-design.rst | 4 +- Makefile | 4 +- arch/arm/mach-at91/pm_suspend.S | 4 +- arch/arm/mach-omap2/pm33xx-core.c | 6 +- arch/arm/mm/pageattr.c | 6 +- arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts | 2 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- arch/arm64/kernel/cpufeature.c | 10 +- arch/arm64/kernel/fpsimd.c | 8 +- arch/arm64/kernel/mte.c | 3 +- arch/parisc/include/uapi/asm/ioctls.h | 8 +- arch/powerpc/platforms/powernv/pci-ioda.c | 2 +- arch/powerpc/platforms/pseries/msi.c | 2 +- arch/sparc/kernel/of_device_32.c | 1 + arch/sparc/kernel/of_device_64.c | 1 + arch/sparc/lib/M7memcpy.S | 20 +- arch/sparc/lib/Memcpy_utils.S | 9 + arch/sparc/lib/NG4memcpy.S | 2 +- arch/sparc/lib/NGmemcpy.S | 29 ++- arch/sparc/lib/U1memcpy.S | 19 +- arch/sparc/lib/U3memcpy.S | 2 +- arch/sparc/mm/hugetlbpage.c | 20 ++ arch/um/drivers/mconsole_user.c | 2 + arch/x86/include/asm/segment.h | 8 +- arch/x86/kernel/umip.c | 15 +- arch/x86/kvm/emulate.c | 11 +- arch/x86/kvm/kvm_emulate.h | 2 +- arch/x86/kvm/x86.c | 9 +- arch/x86/mm/pgtable.c | 2 +- block/blk-mq-sysfs.c | 6 +- block/blk-settings.c | 3 +- crypto/essiv.c | 14 +- crypto/rng.c | 8 + drivers/acpi/acpi_dbg.c | 26 +- drivers/acpi/acpi_tad.c | 3 + drivers/acpi/nfit/core.c | 2 +- drivers/acpi/processor_idle.c | 3 + drivers/base/node.c | 4 + drivers/base/power/main.c | 14 +- drivers/base/regmap/regmap.c | 2 +- drivers/bus/fsl-mc/fsl-mc-bus.c | 3 + drivers/bus/mhi/host/init.c | 5 +- drivers/char/hw_random/ks-sa-rng.c | 4 + drivers/char/tpm/tpm_tis_core.c | 4 +- drivers/clk/at91/clk-peripheral.c | 7 +- drivers/clk/nxp/clk-lpc18xx-cgu.c | 20 +- drivers/clocksource/clps711x-timer.c | 23 +- drivers/cpufreq/intel_pstate.c | 8 +- drivers/cpufreq/scmi-cpufreq.c | 10 + drivers/cpufreq/tegra186-cpufreq.c | 8 +- drivers/crypto/atmel-tdes.c | 2 +- drivers/dma/ioat/dma.c | 12 +- drivers/edac/sb_edac.c | 4 +- drivers/edac/skx_common.h | 1 - drivers/firmware/meson/Kconfig | 2 +- drivers/firmware/meson/meson_sm.c | 7 +- drivers/gpio/gpio-wcd934x.c | 3 +- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 2 + drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c | 29 ++- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 2 +- drivers/gpu/drm/amd/display/dc/dce/dce_transform.c | 21 +- drivers/gpu/drm/amd/display/dc/dce/dce_transform.h | 4 + .../gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c | 2 + .../gpu/drm/amd/include/asic_reg/dce/dce_6_0_d.h | 7 + .../drm/amd/include/asic_reg/dce/dce_6_0_sh_mask.h | 2 + drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppevvmath.h | 14 +- .../drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 2 + drivers/gpu/drm/arm/display/include/malidp_utils.h | 2 +- .../drm/arm/display/komeda/komeda_pipeline_state.c | 24 +- drivers/gpu/drm/drm_color_mgmt.c | 2 +- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 6 - drivers/gpu/drm/nouveau/nouveau_bo.c | 2 +- drivers/gpu/drm/radeon/evergreen_cs.c | 2 + drivers/gpu/drm/radeon/r600_cs.c | 4 +- drivers/gpu/drm/vmwgfx/Makefile | 2 +- drivers/gpu/drm/vmwgfx/ttm_object.c | 52 ++-- drivers/gpu/drm/vmwgfx/ttm_object.h | 3 +- drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c | 24 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 6 +- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_hashtab.c | 199 ++++++++++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_hashtab.h | 83 +++++++ drivers/gpu/drm/vmwgfx/vmwgfx_validation.c | 26 +- drivers/gpu/drm/vmwgfx/vmwgfx_validation.h | 7 +- drivers/hid/hid-mcp2221.c | 4 + drivers/hwmon/adt7475.c | 24 +- drivers/hwtracing/coresight/coresight-trbe.c | 9 +- drivers/i2c/busses/i2c-designware-platdrv.c | 1 + drivers/i2c/busses/i2c-mt65xx.c | 17 +- drivers/i3c/master/svc-i3c-master.c | 1 + drivers/iio/dac/ad5360.c | 2 +- drivers/iio/dac/ad5421.c | 2 +- drivers/iio/frequency/adf4350.c | 20 +- drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 4 - drivers/iio/inkern.c | 2 +- drivers/infiniband/core/addr.c | 10 +- drivers/infiniband/core/cm.c | 4 +- drivers/infiniband/core/sa_query.c | 6 +- drivers/infiniband/sw/siw/siw_verbs.c | 25 +- drivers/input/misc/uinput.c | 1 + drivers/input/touchscreen/atmel_mxt_ts.c | 2 +- drivers/input/touchscreen/cyttsp4_core.c | 2 +- drivers/iommu/amd/iommu.c | 3 +- drivers/iommu/intel/iommu.c | 2 +- drivers/irqchip/irq-sun6i-r.c | 2 +- drivers/mailbox/zynqmp-ipi-mailbox.c | 7 +- drivers/md/dm-integrity.c | 6 +- drivers/md/dm.c | 7 +- drivers/media/dvb-frontends/stv0367_priv.h | 3 + drivers/media/i2c/mt9v111.c | 2 +- drivers/media/i2c/rj54n1cb0c.c | 9 +- drivers/media/i2c/tc358743.c | 4 +- drivers/media/mc/mc-devnode.c | 6 +- drivers/media/pci/b2c2/flexcop-pci.c | 2 +- drivers/media/pci/cobalt/cobalt-driver.c | 4 +- drivers/media/pci/cx18/cx18-driver.c | 2 +- drivers/media/pci/cx18/cx18-queue.c | 20 +- drivers/media/pci/cx18/cx18-streams.c | 16 +- drivers/media/pci/ddbridge/ddbridge-main.c | 4 +- drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 2 +- drivers/media/pci/ivtv/ivtv-driver.c | 2 +- drivers/media/pci/ivtv/ivtv-irq.c | 2 +- drivers/media/pci/ivtv/ivtv-queue.c | 18 +- drivers/media/pci/ivtv/ivtv-streams.c | 22 +- drivers/media/pci/ivtv/ivtv-udma.c | 27 ++- drivers/media/pci/ivtv/ivtv-yuv.c | 24 +- drivers/media/pci/ivtv/ivtvfb.c | 6 +- drivers/media/pci/netup_unidvb/netup_unidvb_core.c | 2 +- drivers/media/pci/pluto2/pluto2.c | 20 +- drivers/media/pci/pt1/pt1.c | 2 +- drivers/media/pci/tw5864/tw5864-core.c | 2 +- drivers/media/rc/imon.c | 27 ++- drivers/media/tuners/xc5000.c | 41 ++-- drivers/memory/samsung/exynos-srom.c | 10 +- drivers/mfd/intel_soc_pmic_chtdc_ti.c | 5 +- drivers/mfd/vexpress-sysreg.c | 6 +- drivers/misc/genwqe/card_ddcb.c | 2 +- drivers/mmc/core/sdio.c | 6 +- drivers/mtd/nand/raw/fsmc_nand.c | 6 +- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 5 +- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 18 +- drivers/net/ethernet/dlink/dl2k.c | 7 +- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 + drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +- .../ethernet/mellanox/mlx5/core/en/port_buffer.h | 12 - drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 17 +- .../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- drivers/net/fjes/fjes_main.c | 4 +- drivers/net/usb/asix_devices.c | 35 ++- drivers/net/usb/rtl8150.c | 2 - drivers/net/wireless/ath/ath10k/wmi.c | 39 ++- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 7 +- drivers/net/wireless/mediatek/mt76/mt7603/soc.c | 2 +- .../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c | 1 - drivers/nfc/pn544/i2c.c | 2 - drivers/nvme/host/pci.c | 2 + drivers/nvme/target/fc.c | 19 +- drivers/pci/controller/dwc/pci-keystone.c | 4 +- drivers/pci/controller/dwc/pcie-tegra194.c | 4 +- drivers/pci/controller/pci-tegra.c | 2 +- drivers/pci/iov.c | 5 + drivers/pci/pci-driver.c | 1 + drivers/pci/pci-sysfs.c | 20 +- drivers/pci/pcie/aer.c | 12 +- drivers/pci/pcie/err.c | 8 +- drivers/perf/arm_spe_pmu.c | 3 +- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 10 + drivers/pinctrl/pinmux.c | 2 +- drivers/pinctrl/renesas/pinctrl.c | 3 +- drivers/platform/x86/intel/int3472/discrete.c | 3 + drivers/platform/x86/intel/int3472/tps68470.c | 3 + drivers/platform/x86/sony-laptop.c | 1 - drivers/pps/kapi.c | 5 +- drivers/pps/pps.c | 5 +- drivers/pwm/pwm-berlin.c | 4 +- drivers/pwm/pwm-tiehrpwm.c | 4 +- drivers/regulator/scmi-regulator.c | 3 +- drivers/remoteproc/qcom_q6v5.c | 3 - drivers/rtc/interface.c | 27 +++ drivers/rtc/rtc-x1205.c | 2 +- drivers/s390/cio/device.c | 35 ++- drivers/scsi/hpsa.c | 21 +- drivers/scsi/isci/init.c | 6 +- drivers/scsi/mpt3sas/mpt3sas_transport.c | 8 +- drivers/scsi/mvsas/mv_defs.h | 1 + drivers/scsi/mvsas/mv_init.c | 13 +- drivers/scsi/mvsas/mv_sas.c | 42 ++-- drivers/scsi/mvsas/mv_sas.h | 8 +- drivers/scsi/myrs.c | 8 +- drivers/scsi/pm8001/pm8001_sas.c | 9 +- drivers/scsi/qla2xxx/qla_edif.c | 4 +- drivers/scsi/qla2xxx/qla_init.c | 4 +- drivers/soc/qcom/rpmh-rsc.c | 7 +- drivers/spi/spi-cadence-quadspi.c | 5 + drivers/staging/axis-fifo/axis-fifo.c | 32 ++- .../pci/hive_isp_css_include/math_support.h | 5 - drivers/target/target_core_configfs.c | 2 +- drivers/thermal/qcom/Kconfig | 3 +- drivers/thermal/qcom/lmh.c | 2 + drivers/tty/serial/Kconfig | 2 +- drivers/uio/uio_hv_generic.c | 7 +- drivers/usb/cdns3/cdnsp-pci.c | 5 +- drivers/usb/gadget/configfs.c | 2 + drivers/usb/host/max3421-hcd.c | 2 +- drivers/usb/host/xhci-ring.c | 11 +- drivers/usb/phy/phy-twl6030-usb.c | 3 +- drivers/usb/serial/option.c | 6 + drivers/usb/usbip/vhci_hcd.c | 22 ++ drivers/virt/acrn/ioreq.c | 4 +- drivers/watchdog/mpc8xxx_wdt.c | 2 + drivers/xen/events/events_base.c | 20 +- drivers/xen/manage.c | 3 +- fs/btrfs/export.c | 8 +- fs/btrfs/extent_io.c | 14 +- fs/btrfs/misc.h | 2 - fs/btrfs/tree-checker.c | 2 +- fs/cramfs/inode.c | 11 +- fs/erofs/zdata.h | 2 +- fs/ext2/balloc.c | 2 - fs/ext4/ext4.h | 12 +- fs/ext4/file.c | 2 +- fs/ext4/fsmap.c | 14 +- fs/ext4/inode.c | 12 +- fs/ext4/orphan.c | 23 +- fs/ext4/super.c | 4 +- fs/ext4/xattr.c | 15 +- fs/file.c | 5 +- fs/fs-writeback.c | 32 ++- fs/fsopen.c | 70 +++--- fs/ksmbd/smb2pdu.c | 3 +- fs/minix/inode.c | 8 +- fs/namei.c | 8 + fs/namespace.c | 11 +- fs/nfs/nfs4proc.c | 2 +- fs/nfsd/lockd.c | 15 ++ fs/nfsd/nfs4proc.c | 2 +- fs/ntfs3/bitmap.c | 1 + fs/ntfs3/run.c | 12 +- fs/ocfs2/stack_user.c | 1 + fs/squashfs/inode.c | 31 ++- fs/squashfs/squashfs_fs_i.h | 2 +- fs/udf/inode.c | 3 + fs/ufs/util.h | 6 - include/linux/cleanup.h | 171 +++++++++++++ include/linux/compiler-clang.h | 9 + include/linux/compiler.h | 9 + include/linux/compiler_attributes.h | 6 + include/linux/device.h | 10 + include/linux/file.h | 6 + include/linux/iio/frequency/adf4350.h | 2 +- include/linux/irqflags.h | 7 + include/linux/minmax.h | 264 +++++++++++++++------ include/linux/mutex.h | 4 + include/linux/percpu.h | 4 + include/linux/preempt.h | 47 ++++ include/linux/rcupdate.h | 3 + include/linux/rwsem.h | 8 + include/linux/sched/task.h | 2 + include/linux/slab.h | 3 + include/linux/spinlock.h | 32 +++ include/linux/srcu.h | 5 + include/scsi/libsas.h | 18 ++ include/trace/events/filelock.h | 3 +- init/main.c | 14 ++ kernel/bpf/inode.c | 4 +- kernel/fork.c | 2 +- kernel/pid.c | 5 +- kernel/smp.c | 11 +- kernel/trace/preemptirq_delay_test.c | 2 - kernel/trace/trace_kprobe.c | 11 +- kernel/trace/trace_probe.h | 9 +- kernel/trace/trace_uprobe.c | 12 +- lib/btree.c | 1 - lib/crypto/Makefile | 4 + lib/decompress_unlzma.c | 2 + lib/genalloc.c | 5 +- lib/logic_pio.c | 3 - lib/vsprintf.c | 2 +- lib/zstd/zstd_internal.h | 2 - mm/hugetlb.c | 2 + mm/page_alloc.c | 2 +- mm/zsmalloc.c | 1 - net/9p/trans_fd.c | 8 +- net/bluetooth/mgmt.c | 10 +- net/bridge/br_vlan.c | 2 +- net/core/filter.c | 18 +- net/ipv4/proc.c | 2 +- net/ipv4/tcp.c | 9 +- net/ipv4/tcp_input.c | 1 - net/ipv4/udp.c | 16 +- net/ipv6/proc.c | 2 +- net/mptcp/pm.c | 7 +- net/mptcp/pm_netlink.c | 49 +++- net/mptcp/protocol.h | 8 + net/netfilter/ipset/ip_set_hash_gen.h | 8 +- net/netfilter/ipvs/ip_vs_ftp.c | 4 +- net/netfilter/nf_nat_core.c | 6 +- net/nfc/nci/ntf.c | 135 ++++++++--- net/sctp/sm_make_chunk.c | 3 +- net/sctp/sm_statefuns.c | 6 +- net/tipc/core.h | 2 +- net/tipc/link.c | 10 +- scripts/checkpatch.pl | 2 +- security/keys/trusted-keys/trusted_tpm1.c | 7 +- sound/pci/lx6464es/lx_core.c | 4 +- sound/soc/codecs/wcd934x.c | 30 ++- sound/soc/intel/boards/bytcht_es8316.c | 20 +- sound/soc/intel/boards/bytcr_rt5640.c | 7 +- sound/soc/intel/boards/bytcr_rt5651.c | 26 +- tools/build/feature/Makefile | 4 +- tools/include/nolibc/std.h | 2 +- tools/lib/bpf/libbpf.c | 10 + tools/lib/perf/include/perf/event.h | 1 + tools/lib/subcmd/help.c | 3 + tools/perf/tests/perf-record.c | 4 + tools/perf/util/arm-spe-decoder/arm-spe-decoder.c | 33 ++- tools/perf/util/arm-spe-decoder/arm-spe-decoder.h | 60 ++++- tools/perf/util/arm-spe.c | 146 ++++++++++-- tools/perf/util/evsel.c | 2 + tools/perf/util/lzma.c | 2 +- tools/perf/util/session.c | 2 +- tools/perf/util/zlib.c | 2 +- tools/testing/nvdimm/test/ndtest.c | 13 +- tools/testing/selftests/arm64/pauth/exec_target.c | 7 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 10 + tools/testing/selftests/rseq/rseq.c | 8 +- tools/testing/selftests/vm/mremap_test.c | 2 + tools/testing/selftests/watchdog/watchdog-test.c | 6 + 333 files changed, 2761 insertions(+), 1057 deletions(-)

1 week, 6 days

7
287
0 0

[PATCH 5.15.y] Revert "perf test: Don't leak workload gopipe in PERF_RECORD_*"

by niko.mauno＠vaisala.com

From: Niko Mauno <niko.mauno(a)vaisala.com> This reverts commit b7e5c59f3b0971f56ebbceb9d42cc45e9ac1cd94. Commit in question broke building perf followingly with v5.15.195: | ld: perf-in.o: in function `test__PERF_RECORD': | tools/perf/tests/perf-record.c:142: undefined reference to `evlist__cancel_workload' The 'evlist__cancel_workload' seems to be introduced in commit e880a70f8046 ("perf stat: Close cork_fd when create_perf_stat_counter() failed") which is currently not included in the 5.15 stable series. Fixes: b7e5c59f3b09 ("perf test: Don't leak workload gopipe in PERF_RECORD_*") Cc: stable(a)vger.kernel.org # 5.15 Signed-off-by: Niko Mauno <niko.mauno(a)vaisala.com> --- tools/perf/tests/perf-record.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/tools/perf/tests/perf-record.c b/tools/perf/tests/perf-record.c index b215e89b65f7..0df471bf1590 100644 --- a/tools/perf/tests/perf-record.c +++ b/tools/perf/tests/perf-record.c @@ -115,7 +115,6 @@ int test__PERF_RECORD(struct test *test __maybe_unused, int subtest __maybe_unus if (err < 0) { pr_debug("sched__get_first_possible_cpu: %s\n", str_error_r(errno, sbuf, sizeof(sbuf))); - evlist__cancel_workload(evlist); goto out_delete_evlist; } @@ -127,7 +126,6 @@ int test__PERF_RECORD(struct test *test __maybe_unused, int subtest __maybe_unus if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, &cpu_mask) < 0) { pr_debug("sched_setaffinity: %s\n", str_error_r(errno, sbuf, sizeof(sbuf))); - evlist__cancel_workload(evlist); goto out_delete_evlist; } @@ -139,7 +137,6 @@ int test__PERF_RECORD(struct test *test __maybe_unused, int subtest __maybe_unus if (err < 0) { pr_debug("perf_evlist__open: %s\n", str_error_r(errno, sbuf, sizeof(sbuf))); - evlist__cancel_workload(evlist); goto out_delete_evlist; } @@ -152,7 +149,6 @@ int test__PERF_RECORD(struct test *test __maybe_unused, int subtest __maybe_unus if (err < 0) { pr_debug("evlist__mmap: %s\n", str_error_r(errno, sbuf, sizeof(sbuf))); - evlist__cancel_workload(evlist); goto out_delete_evlist; } -- 2.39.5

1 week, 6 days

1
0
0 0

[PATCH 6.12 000/135] 6.12.55-rc2 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.12.55 release. There are 135 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Fri, 24 Oct 2025 06:01:25 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.12.55-rc… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.12.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 6.12.55-rc2 Guenter Roeck <linux(a)roeck-us.net> dmaengine: Add missing cleanup on module unload Mark Rutland <mark.rutland(a)arm.com> arm64: errata: Apply workarounds for Neoverse-V3AE Mark Rutland <mark.rutland(a)arm.com> arm64: cputype: Add Neoverse-V3AE definitions Jakub Acs <acsjakub(a)amazon.de> mm/ksm: fix flag-dropping behavior in ksm_madvise Chuck Lever <chuck.lever(a)oracle.com> NFSD: Define a proc_layoutcommit for the FlexFiles layout type Devarsh Thakkar <devarsht(a)ti.com> phy: cadence: cdns-dphy: Update calibration wait time for startup state machine Matthieu Baerts (NGI0) <matttbe(a)kernel.org> mptcp: reset blackhole on success with non-loopback ifaces Kuniyuki Iwashima <kuniyu(a)google.com> mptcp: Use __sk_dst_get() and dst_dev_rcu() in mptcp_active_enable(). Kuniyuki Iwashima <kuniyu(a)google.com> mptcp: Call dst_release() in mptcp_active_enable(). Sharath Chandra Vurukala <quic_sharathv(a)quicinc.com> net: Add locking to protect skb->dev access in ip_output Eric Dumazet <edumazet(a)google.com> ipv4: adopt dst_dev, skb_dst_dev and skb_dst_dev_net[_rcu] Eric Dumazet <edumazet(a)google.com> net: dst: add four helpers to annotate data-races around dst->dev Eric Dumazet <edumazet(a)google.com> tcp: cache RTAX_QUICKACK metric in a hot cache line Eric Dumazet <edumazet(a)google.com> tcp: convert to dev_net_rcu() Jedrzej Jagielski <jedrzej.jagielski(a)intel.com> ixgbevf: fix mailbox API compatibility by negotiating supported features Jedrzej Jagielski <jedrzej.jagielski(a)intel.com> ixgbevf: fix getting link speed data for E610 devices Piotr Kwapulinski <piotr.kwapulinski(a)intel.com> ixgbevf: Add support for Intel(R) E610 device Piotr Kwapulinski <piotr.kwapulinski(a)intel.com> PCI: Add PCI_VDEVICE_SUB helper macro Jan Kara <jack(a)suse.cz> vfs: Don't leak disconnected dentries on umount Al Viro <viro(a)zeniv.linux.org.uk> d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier Babu Moger <babu.moger(a)amd.com> x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID Babu Moger <babu.moger(a)amd.com> x86/resctrl: Refactor resctrl_arch_rmid_read() Yu Kuai <yukuai3(a)huawei.com> md: fix mssing blktrace bio split events John Garry <john.g.garry(a)oracle.com> md/raid10: Handle bio_split() errors John Garry <john.g.garry(a)oracle.com> md/raid1: Handle bio_split() errors John Garry <john.g.garry(a)oracle.com> md/raid0: Handle bio_split() errors Xiao Liang <shaw.leon(a)gmail.com> padata: Reset next CPU when reorder sequence wraps around Darrick J. Wong <djwong(a)kernel.org> xfs: use deferred intent items for reaping crosslinked blocks Fedor Pchelkin <pchelkin(a)ispras.ru> wifi: rtw89: avoid possible TX wait initialization race Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Fix last write offset handling in layoutcommit Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Implement large extent array support in pNFS Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Minor cleanup in layoutcommit processing Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Rework encoding and decoding of nfsd4_deviceid Sergey Bashirov <sergeybashirov(a)gmail.com> nfsd: Drop dprintk in blocklayout xdr functions Sergey Bashirov <sergeybashirov(a)gmail.com> nfsd: Use correct error code when decoding extents Sean Nyekjaer <sean(a)geanix.com> iio: imu: inv_icm42600: Avoid configuring if already pm_runtime suspended Sean Nyekjaer <sean(a)geanix.com> iio: imu: inv_icm42600: Simplify pm_runtime setup Bence Csókás <csokas.bence(a)prolan.hu> PM: runtime: Add new devm functions Devarsh Thakkar <devarsht(a)ti.com> phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> phy: cdns-dphy: Store hs_clk_rate and return it Christoph Hellwig <hch(a)lst.de> xfs: fix log CRC mismatches between i386 and other architectures Christoph Hellwig <hch(a)lst.de> xfs: rename the old_crc variable in xlog_recover_process Viacheslav Dubeyko <slava(a)dubeyko.com> hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp() Wilfred Mallawa <wilfred.mallawa(a)wdc.com> nvme/tcp: handle tls partially sent records in write_space() Xing Guo <higuoxing(a)gmail.com> selftests: arg_parsing: Ensure data is flushed to disk before reading. Li Qiang <liqiang01(a)kylinos.cn> ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com> HID: multitouch: fix name of Stylus input devices Dmitry Torokhov <dmitry.torokhov(a)gmail.com> HID: hid-input: only ignore 0 battery events for digitizers Jiaming Zhang <r772577952(a)gmail.com> ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card Andrii Nakryiko <andrii(a)kernel.org> selftests/bpf: make arg_parsing.c more robust to crashes Pranjal Ramajor Asha Kanojiya <quic_pkanojiy(a)quicinc.com> accel/qaic: Synchronize access to DBC request queue head & tail pointer Youssef Samir <quic_yabdulra(a)quicinc.com> accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages() Jeffrey Hugo <quic_jhugo(a)quicinc.com> accel/qaic: Fix bootlog initialization ordering Randy Dunlap <rdunlap(a)infradead.org> ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings Vincent Guittot <vincent.guittot(a)linaro.org> sched/fair: Fix pelt lost idle time detection Alok Tiwari <alok.a.tiwari(a)oracle.com> drm/rockchip: vop2: use correct destination rectangle height check Francesco Valla <francesco(a)valla.it> drm/draw: fix color truncation in drm_draw_fill24 Timur Kristóf <timur.kristof(a)gmail.com> drm/amd/powerplay: Fix CIK shutdown temperature Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: fix handling of harvesting for ip_discovery firmware Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: add support for cyan skillfish without IP discovery Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: add ip offset support for cyan skillfish Zhanjun Dong <zhanjun.dong(a)intel.com> drm/i915/guc: Skip communication warning on reset in progress Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Generalize helper to clear IRQ status Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Cancel jdet_work before handling jack ejection Christophe Leroy <christophe.leroy(a)csgroup.eu> ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec Marek Vasut <marek.vasut(a)mailbox.org> drm/bridge: lt9211: Drop check for last nibble of version register Fabian Vogt <fvogt(a)suse.de> riscv: kprobes: Fix probe address validation Amit Chaudhary <achaudhary(a)purestorage.com> nvme-multipath: Skip nr_active increments in RETRY disposition Ketil Johnsen <ketil.johnsen(a)arm.com> drm/panthor: Ensure MCU is disabled on suspend I Viswanath <viswanathiyyappan(a)gmail.com> net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset Oleksij Rempel <o.rempel(a)pengutronix.de> net: usb: lan78xx: Add error handling to lan78xx_init_mac_address Breno Leitao <leitao(a)debian.org> netdevsim: set the carrier when the device goes up Sabrina Dubroca <sd(a)queasysnail.net> tls: don't rely on tx_work during send() Sabrina Dubroca <sd(a)queasysnail.net> tls: wait for pending async decryptions if tls_strp_msg_hold fails Sabrina Dubroca <sd(a)queasysnail.net> tls: always set record_type in tls_process_cmsg Sabrina Dubroca <sd(a)queasysnail.net> tls: wait for async encrypt in case of error during latter iterations of sendmsg Sabrina Dubroca <sd(a)queasysnail.net> tls: trim encrypted message to match the plaintext on short splice Alexey Simakov <bigalex934(a)gmail.com> tg3: prevent use of uninitialized remote_adv and local_adv variables Marios Makassikis <mmakassikis(a)freebox.fr> ksmbd: fix recursive locking in RPC handle list access Eric Dumazet <edumazet(a)google.com> tcp: fix tcp_tso_should_defer() vs large RTT Raju Rangoju <Raju.Rangoju(a)amd.com> amd-xgbe: Avoid spurious link down messages during interface toggle Dmitry Safonov <0x7f454c46(a)gmail.com> net/ip6_tunnel: Prevent perpetual tunnel growth Linmao Li <lilinmao(a)kylinos.cn> r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H Nicolas Dichtel <nicolas.dichtel(a)6wind.com> doc: fix seg6_flowlabel path Yeounsu Moon <yyyynoom(a)gmail.com> net: dlink: handle dma_map_single() failure properly Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: fix CAN state in system PM Sean Nyekjaer <sean(a)geanix.com> can: m_can: call deinit/init callback when going into suspend/resume Sean Nyekjaer <sean(a)geanix.com> can: m_can: add deinit callback Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: m_can_chip_config(): bring up interface in correct state Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: m_can_plat_remove(): add missing pm_runtime_disable() Yuezhang Mo <Yuezhang.Mo(a)sony.com> dax: skip read lock assertion for read-only filesystems Benjamin Tissoires <bentiss(a)kernel.org> HID: multitouch: fix sticky fingers Jens Axboe <axboe(a)kernel.dk> Revert "io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()" Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_rndis: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_ecm: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_acm: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_ncm: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: Introduce free_usb_request helper Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: Store endpoint pointer in usb_request Kaustabh Chakraborty <kauschluss(a)disroot.org> drm/exynos: exynos7_drm_decon: remove ctx->suspended Kaustabh Chakraborty <kauschluss(a)disroot.org> drm/exynos: exynos7_drm_decon: properly clear channels during bind Kaustabh Chakraborty <kauschluss(a)disroot.org> drm/exynos: exynos7_drm_decon: fix uninitialized crtc reference in functions Guoniu Zhou <guoniu.zhou(a)nxp.com> media: nxp: imx8-isi: m2m: Fix streaming cleanup on release Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> media: nxp: imx8-isi: Drop unused argument to mxc_isi_channel_chain() Akhil P Oommen <akhilpo(a)oss.qualcomm.com> drm/msm/a6xx: Fix PDC sleep sequence Miaoqian Lin <linmq006(a)gmail.com> cdx: Fix device node reference leak in cdx_msi_domain_init Jiri Slaby (SUSE) <jirislaby(a)kernel.org> irqdomain: cdx: Switch to of_fwnode_handle() Mario Limonciello <mario.limonciello(a)amd.com> drm/amd: Check whether secure display TA loaded successfully Adrian Hunter <adrian.hunter(a)intel.com> perf/core: Fix MMAP2 event device with backing files Adrian Hunter <adrian.hunter(a)intel.com> perf/core: Fix MMAP event path names with backing files Adrian Hunter <adrian.hunter(a)intel.com> perf/core: Fix address filter match with backing files Jonathan Kim <jonathan.kim(a)amd.com> drm/amdgpu: fix gfx12 mes packet status return check Gui-Dong Han <hanguidong02(a)gmail.com> drm/amdgpu: use atomic functions with memory barriers for vm fault info Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies Eugene Korenevsky <ekorenevsky(a)aliyun.com> cifs: parse_dfs_referrals: prevent oob on malformed input Celeste Liu <uwu(a)coelacanthus.name> can: gs_usb: increase max interface to U8_MAX Celeste Liu <uwu(a)coelacanthus.name> can: gs_usb: gs_make_candev(): populate net_device->dev_port Filipe Manana <fdmanana(a)suse.com> btrfs: do not assert we found block group item when creating free space tree Miquel Sabaté Solà <mssola(a)mssola.com> btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST Boris Burkov <boris(a)bur.io> btrfs: fix incorrect readahead expansion length Miquel Sabaté Solà <mssola(a)mssola.com> btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl Filipe Manana <fdmanana(a)suse.com> btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already running Deepanshu Kartikey <kartikey406(a)gmail.com> ext4: detect invalid INLINE_DATA + EXTENTS flag combination Zhang Yi <yi.zhang(a)huawei.com> ext4: wait for ongoing I/O to complete before freeing blocks Zhang Yi <yi.zhang(a)huawei.com> jbd2: ensure that all ongoing I/O complete before freeing blocks Jaegeuk Kim <jaegeuk(a)kernel.org> f2fs: fix wrong block mapping for multi-devices Oliver Upton <oliver.upton(a)linux.dev> KVM: arm64: Prevent access to vCPU events before init Yi Cong <yicong(a)kylinos.cn> r8152: add error handling in rtl8152_driver_init Hao Ge <gehao(a)kylinos.cn> slab: reset slab->obj_ext when freeing and it is OBJEXTS_ALLOC_FAIL Shuhao Fu <sfual(a)cse.ust.hk> smb: client: Fix refcount leak for cifs_sb_tlink Conor Dooley <conor.dooley(a)microchip.com> rust: cfi: only 64-bit arm and x86 support CFI_CLANG Shuicheng Lin <shuicheng.lin(a)intel.com> drm/xe/guc: Check GuC running state before deregistering exec queue ------------- Diffstat: Documentation/arch/arm64/silicon-errata.rst | 2 + Documentation/networking/seg6-sysctl.rst | 3 + Makefile | 4 +- arch/Kconfig | 1 + arch/arm64/Kconfig | 1 + arch/arm64/include/asm/cputype.h | 2 + arch/arm64/kernel/cpu_errata.c | 1 + arch/arm64/kvm/arm.c | 6 + arch/riscv/kernel/probes/kprobes.c | 13 +- arch/x86/kernel/cpu/resctrl/monitor.c | 46 +++-- drivers/accel/qaic/qaic.h | 2 + drivers/accel/qaic/qaic_control.c | 2 +- drivers/accel/qaic/qaic_data.c | 12 +- drivers/accel/qaic/qaic_debugfs.c | 5 +- drivers/accel/qaic/qaic_drv.c | 3 + drivers/base/power/runtime.c | 44 ++++ drivers/cdx/cdx_msi.c | 5 +- drivers/cpufreq/cppc_cpufreq.c | 14 +- drivers/dma/idxd/init.c | 2 + drivers/gpu/drm/amd/amdgpu/Makefile | 3 +- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 5 +- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 48 ++++- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +- .../gpu/drm/amd/amdgpu/cyan_skillfish_reg_init.c | 56 +++++ drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c | 7 +- drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 7 +- drivers/gpu/drm/amd/amdgpu/mes_v12_0.c | 7 +- drivers/gpu/drm/amd/amdgpu/nv.h | 1 + .../gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 3 +- drivers/gpu/drm/bridge/lontium-lt9211.c | 3 +- drivers/gpu/drm/drm_draw.c | 2 +- drivers/gpu/drm/drm_draw_internal.h | 2 +- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 98 ++++----- drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c | 9 +- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 28 ++- drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 6 + drivers/gpu/drm/panthor/panthor_fw.c | 1 + drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 2 +- drivers/gpu/drm/scheduler/sched_main.c | 13 +- drivers/gpu/drm/xe/xe_guc_submit.c | 13 +- drivers/hid/hid-input.c | 5 +- drivers/hid/hid-multitouch.c | 28 +-- drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 35 ++-- drivers/md/md-linear.c | 1 + drivers/md/raid0.c | 16 ++ drivers/md/raid1.c | 37 +++- drivers/md/raid10.c | 55 ++++- drivers/md/raid5.c | 2 + .../media/platform/nxp/imx8-isi/imx8-isi-core.h | 2 +- drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c | 2 +- drivers/media/platform/nxp/imx8-isi/imx8-isi-m2m.c | 225 +++++++++------------ .../media/platform/nxp/imx8-isi/imx8-isi-pipe.c | 2 +- drivers/net/can/m_can/m_can.c | 86 +++++--- drivers/net/can/m_can/m_can.h | 1 + drivers/net/can/m_can/m_can_platform.c | 2 +- drivers/net/can/usb/gs_usb.c | 23 +-- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 1 - drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 1 + drivers/net/ethernet/broadcom/tg3.c | 5 +- drivers/net/ethernet/dlink/dl2k.c | 23 ++- drivers/net/ethernet/intel/ixgbevf/defines.h | 6 +- drivers/net/ethernet/intel/ixgbevf/ipsec.c | 10 + drivers/net/ethernet/intel/ixgbevf/ixgbevf.h | 13 +- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 46 ++++- drivers/net/ethernet/intel/ixgbevf/mbx.h | 8 + drivers/net/ethernet/intel/ixgbevf/vf.c | 194 +++++++++++++++--- drivers/net/ethernet/intel/ixgbevf/vf.h | 5 +- drivers/net/ethernet/realtek/r8169_main.c | 5 +- drivers/net/netdevsim/netdev.c | 7 + drivers/net/usb/lan78xx.c | 38 +++- drivers/net/usb/r8152.c | 7 +- drivers/net/wireless/realtek/rtw89/core.c | 39 ++-- drivers/net/wireless/realtek/rtw89/core.h | 6 +- drivers/net/wireless/realtek/rtw89/mac80211.c | 2 +- drivers/net/wireless/realtek/rtw89/pci.c | 2 - drivers/nvme/host/multipath.c | 6 +- drivers/nvme/host/tcp.c | 3 + drivers/phy/cadence/cdns-dphy.c | 133 +++++++++--- drivers/usb/gadget/function/f_acm.c | 42 ++-- drivers/usb/gadget/function/f_ecm.c | 48 ++--- drivers/usb/gadget/function/f_ncm.c | 78 +++---- drivers/usb/gadget/function/f_rndis.c | 85 ++++---- drivers/usb/gadget/udc/core.c | 3 + fs/btrfs/extent_io.c | 2 +- fs/btrfs/free-space-tree.c | 15 +- fs/btrfs/ioctl.c | 2 +- fs/btrfs/relocation.c | 13 +- fs/btrfs/zoned.c | 2 +- fs/dax.c | 2 +- fs/dcache.c | 12 +- fs/ext4/ext4_jbd2.c | 11 +- fs/ext4/inode.c | 8 + fs/f2fs/data.c | 2 +- fs/hfsplus/unicode.c | 24 +++ fs/jbd2/transaction.c | 13 +- fs/nfsd/blocklayout.c | 33 +-- fs/nfsd/blocklayoutxdr.c | 171 ++++++++++------ fs/nfsd/blocklayoutxdr.h | 8 +- fs/nfsd/flexfilelayout.c | 8 + fs/nfsd/flexfilelayoutxdr.c | 3 +- fs/nfsd/nfs4layouts.c | 1 - fs/nfsd/nfs4proc.c | 36 ++-- fs/nfsd/nfs4xdr.c | 25 +-- fs/nfsd/nfsd.h | 1 + fs/nfsd/pnfs.h | 1 + fs/nfsd/xdr4.h | 39 +++- fs/smb/client/inode.c | 6 +- fs/smb/client/misc.c | 17 ++ fs/smb/client/smb2ops.c | 8 +- fs/smb/server/mgmt/user_session.c | 7 +- fs/smb/server/smb2pdu.c | 9 +- fs/smb/server/transport_ipc.c | 12 ++ fs/xfs/libxfs/xfs_log_format.h | 30 ++- fs/xfs/libxfs/xfs_ondisk.h | 2 + fs/xfs/scrub/reap.c | 9 +- fs/xfs/xfs_log.c | 8 +- fs/xfs/xfs_log_priv.h | 4 +- fs/xfs/xfs_log_recover.c | 34 +++- include/linux/mm.h | 2 +- include/linux/pci.h | 14 ++ include/linux/pm_runtime.h | 4 + include/linux/usb/gadget.h | 25 +++ include/net/dst.h | 32 +++ include/net/inet6_hashtables.h | 2 +- include/net/inet_connection_sock.h | 3 +- include/net/inet_hashtables.h | 2 +- include/net/ip.h | 11 +- include/net/ip_tunnels.h | 15 ++ include/net/route.h | 2 +- io_uring/rw.c | 2 +- kernel/events/core.c | 8 +- kernel/padata.c | 6 +- kernel/sched/fair.c | 26 +-- mm/slub.c | 9 +- net/core/dst.c | 4 +- net/core/sock.c | 14 +- net/ipv4/icmp.c | 24 ++- net/ipv4/igmp.c | 2 +- net/ipv4/ip_fragment.c | 2 +- net/ipv4/ip_output.c | 19 +- net/ipv4/ip_tunnel.c | 14 -- net/ipv4/ip_vti.c | 4 +- net/ipv4/netfilter.c | 4 +- net/ipv4/route.c | 8 +- net/ipv4/tcp_fastopen.c | 4 +- net/ipv4/tcp_input.c | 3 +- net/ipv4/tcp_ipv4.c | 12 +- net/ipv4/tcp_metrics.c | 8 +- net/ipv4/tcp_output.c | 19 +- net/ipv4/xfrm4_output.c | 2 +- net/ipv6/ip6_tunnel.c | 3 +- net/ipv6/tcp_ipv6.c | 22 +- net/mptcp/ctrl.c | 9 +- net/tls/tls_main.c | 7 +- net/tls/tls_sw.c | 31 ++- rust/bindings/bindings_helper.h | 1 + sound/firewire/amdtp-stream.h | 2 +- sound/soc/amd/acp/acp-sdw-sof-mach.c | 2 +- sound/soc/codecs/idt821034.c | 12 +- sound/soc/codecs/nau8821.c | 53 +++-- sound/usb/card.c | 10 +- .../testing/selftests/bpf/prog_tests/arg_parsing.c | 12 +- 162 files changed, 1911 insertions(+), 959 deletions(-)

1 week, 6 days

11
10
0 0

[PATCH 6.17 000/160] 6.17.5-rc2 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.17.5 release. There are 160 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Fri, 24 Oct 2025 05:33:10 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.17.5-rc2… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.17.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 6.17.5-rc2 Dan Carpenter <dan.carpenter(a)linaro.org> drm/xe: Fix an IS_ERR() vs NULL bug in xe_tile_alloc_vram() Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage Matthew Brost <matthew.brost(a)intel.com> drm/xe: Don't allow evicting of BOs in same VM in array of VM binds Lucas De Marchi <lucas.demarchi(a)intel.com> drm/xe: Move rebar to be done earlier Piotr Piórkowski <piotr.piorkowski(a)intel.com> drm/xe: Unify the initialization of VRAM regions Piotr Piórkowski <piotr.piorkowski(a)intel.com> drm/xe: Move struct xe_vram_region to a dedicated header Piotr Piórkowski <piotr.piorkowski(a)intel.com> drm/xe: Use dynamic allocation for tile and device VRAM region structures Piotr Piórkowski <piotr.piorkowski(a)intel.com> drm/xe: Use devm_ioremap_wc for VRAM mapping and drop manual unmap Devarsh Thakkar <devarsht(a)ti.com> phy: cadence: cdns-dphy: Update calibration wait time for startup state machine Dave Jiang <dave.jiang(a)intel.com> cxl: Fix match_region_by_range() to use region_res_match_cxl_range() Babu Moger <babu.moger(a)amd.com> x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID Babu Moger <babu.moger(a)amd.com> x86/resctrl: Refactor resctrl_arch_rmid_read() Chuck Lever <chuck.lever(a)oracle.com> NFSD: Define a proc_layoutcommit for the FlexFiles layout type Devarsh Thakkar <devarsht(a)ti.com> phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> phy: cdns-dphy: Store hs_clk_rate and return it Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Fix last write offset handling in layoutcommit Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Implement large extent array support in pNFS Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Minor cleanup in layoutcommit processing Sergey Bashirov <sergeybashirov(a)gmail.com> NFSD: Rework encoding and decoding of nfsd4_deviceid Christoph Hellwig <hch(a)lst.de> xfs: fix log CRC mismatches between i386 and other architectures Christoph Hellwig <hch(a)lst.de> xfs: rename the old_crc variable in xlog_recover_process Mark Rutland <mark.rutland(a)arm.com> arm64: errata: Apply workarounds for Neoverse-V3AE Mark Rutland <mark.rutland(a)arm.com> arm64: cputype: Add Neoverse-V3AE definitions Ada Couprie Diaz <ada.coupriediaz(a)arm.com> arm64: debug: always unmask interrupts in el0_softstp() Viacheslav Dubeyko <slava(a)dubeyko.com> hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp() Miguel Ojeda <ojeda(a)kernel.org> rust: cpufreq: fix formatting Wilfred Mallawa <wilfred.mallawa(a)wdc.com> nvme/tcp: handle tls partially sent records in write_space() Xing Guo <higuoxing(a)gmail.com> selftests: arg_parsing: Ensure data is flushed to disk before reading. Matthew Auld <matthew.auld(a)intel.com> drm/xe/evict: drop bogus assert Li Qiang <liqiang01(a)kylinos.cn> ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails Thadeu Lima de Souza Cascardo <cascardo(a)igalia.com> HID: multitouch: fix name of Stylus input devices Dmitry Torokhov <dmitry.torokhov(a)gmail.com> HID: hid-input: only ignore 0 battery events for digitizers Ming Lei <ming.lei(a)redhat.com> block: Remove elevator_lock usage from blkg_conf frozen operations Yu Kuai <yukuai3(a)huawei.com> blk-mq: fix stale tag depth for shared sched tags in blk_mq_update_nr_requests() Jiaming Zhang <r772577952(a)gmail.com> ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card Andrii Nakryiko <andrii(a)kernel.org> selftests/bpf: make arg_parsing.c more robust to crashes Alison Schofield <alison.schofield(a)intel.com> cxl/trace: Subtract to find an hpa_alias0 in cxl_poison events Martin George <martinus.gpy(a)gmail.com> nvme-auth: update sc_c in host response Pranjal Ramajor Asha Kanojiya <quic_pkanojiy(a)quicinc.com> accel/qaic: Synchronize access to DBC request queue head & tail pointer Youssef Samir <quic_yabdulra(a)quicinc.com> accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages() Jeff Hugo <jeff.hugo(a)oss.qualcomm.com> accel/qaic: Fix bootlog initialization ordering Randy Dunlap <rdunlap(a)infradead.org> ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings Vincent Guittot <vincent.guittot(a)linaro.org> sched/fair: Fix pelt lost idle time detection Peter Zijlstra (Intel) <peterz(a)infradead.org> sched/deadline: Stop dl_server before CPU goes offline Even Xu <even.xu(a)intel.com> HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection Alok Tiwari <alok.a.tiwari(a)oracle.com> drm/rockchip: vop2: use correct destination rectangle height check Francesco Valla <francesco(a)valla.it> drm/draw: fix color truncation in drm_draw_fill24 Ingo Molnar <mingo(a)kernel.org> x86/mm: Fix SMP ordering in switch_mm_irqs_off() Dave Jiang <dave.jiang(a)intel.com> cxl/features: Add check for no entries in cxl_feature_info Vinay Belgaumkar <vinay.belgaumkar(a)intel.com> drm/xe: Enable media sampler power gating Timur Kristóf <timur.kristof(a)gmail.com> drm/amd/powerplay: Fix CIK shutdown temperature Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: drop unused structures in amdgpu_drm.h Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: set an error on all fences from a bad context Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: handle wrap around in reemit handling Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: fix handling of harvesting for ip_discovery firmware Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: add support for cyan skillfish without IP discovery Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: add ip offset support for cyan skillfish Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/i915/fb: Fix the set_tiling vs. addfb race, again Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/i915/frontbuffer: Move bo refcounting intel_frontbuffer_{get,release}() Zhanjun Dong <zhanjun.dong(a)intel.com> drm/i915/guc: Skip communication warning on reset in progress Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Consistently clear interrupts before unmasking Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Generalize helper to clear IRQ status Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> ASoC: nau8821: Cancel jdet_work before handling jack ejection Christophe Leroy <christophe.leroy(a)csgroup.eu> ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec Sourabh Jain <sourabhjain(a)linux.ibm.com> powerpc/fadump: skip parameter area allocation when fadump is disabled Marek Vasut <marek.vasut(a)mailbox.org> drm/bridge: lt9211: Drop check for last nibble of version register Fabian Vogt <fvogt(a)suse.de> riscv: kprobes: Fix probe address validation Amit Chaudhary <achaudhary(a)purestorage.com> nvme-multipath: Skip nr_active increments in RETRY disposition Ketil Johnsen <ketil.johnsen(a)arm.com> drm/panthor: Ensure MCU is disabled on suspend I Viswanath <viswanathiyyappan(a)gmail.com> net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset Breno Leitao <leitao(a)debian.org> netdevsim: set the carrier when the device goes up Sabrina Dubroca <sd(a)queasysnail.net> tls: don't rely on tx_work during send() Sabrina Dubroca <sd(a)queasysnail.net> tls: wait for pending async decryptions if tls_strp_msg_hold fails Sabrina Dubroca <sd(a)queasysnail.net> tls: always set record_type in tls_process_cmsg Sabrina Dubroca <sd(a)queasysnail.net> tls: wait for async encrypt in case of error during latter iterations of sendmsg Sabrina Dubroca <sd(a)queasysnail.net> tls: trim encrypted message to match the plaintext on short splice Alexey Simakov <bigalex934(a)gmail.com> tg3: prevent use of uninitialized remote_adv and local_adv variables Marios Makassikis <mmakassikis(a)freebox.fr> ksmbd: fix recursive locking in RPC handle list access Florian Westphal <fw(a)strlen.de> net: core: fix lockdep splat on device unregister Wang Liang <wangliang74(a)huawei.com> selftests: net: check jq command is supported Lorenzo Bianconi <lorenzo(a)kernel.org> net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit() Eric Dumazet <edumazet(a)google.com> tcp: fix tcp_tso_should_defer() vs large RTT Zqiang <qiang.zhang(a)linux.dev> usbnet: Fix using smp_processor_id() in preemptible code warnings Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> Octeontx2-af: Fix missing error code in cgx_probe() Raju Rangoju <Raju.Rangoju(a)amd.com> amd-xgbe: Avoid spurious link down messages during interface toggle Marek Vasut <marek.vasut(a)mailbox.org> net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present Koichiro Den <den(a)valinux.co.jp> ixgbe: fix too early devlink_free() in ixgbe_remove() Milena Olech <milena.olech(a)intel.com> idpf: cleanup remaining SKBs in PTP flows Dmitry Safonov <0x7f454c46(a)gmail.com> net/ip6_tunnel: Prevent perpetual tunnel growth Kamil Horák - 2N <kamilh(a)axis.com> net: phy: bcm54811: Fix GMII/MII/MII-Lite selection Linmao Li <lilinmao(a)kylinos.cn> r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H Ivan Vecera <ivecera(a)redhat.com> dpll: zl3073x: Handle missing or corrupted flash configuration Ivan Vecera <ivecera(a)redhat.com> dpll: zl3073x: Refactor DPLL initialization Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> can: j1939: add missing calls in NETDEV_UNREGISTER notification handler Nicolas Dichtel <nicolas.dichtel(a)6wind.com> doc: fix seg6_flowlabel path Yeounsu Moon <yyyynoom(a)gmail.com> net: dlink: handle dma_map_single() failure properly Rex Lu <rex.lu(a)mediatek.com> net: mtk: wed: add dma mask limitation and GFP_DMA32 for device with more than 4GB DRAM Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: fix CAN state in system PM Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: m_can_chip_config(): bring up interface in correct state Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active Marc Kleine-Budde <mkl(a)pengutronix.de> can: m_can: m_can_plat_remove(): add missing pm_runtime_disable() Christian Brauner <brauner(a)kernel.org> coredump: fix core_pattern input validation Yuezhang Mo <Yuezhang.Mo(a)sony.com> dax: skip read lock assertion for read-only filesystems Benjamin Tissoires <bentiss(a)kernel.org> HID: multitouch: fix sticky fingers Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_ncm: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_ecm: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_acm: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: f_rndis: Refactor bind path to use __free() Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: Introduce free_usb_request helper Kuen-Han Tsai <khtsai(a)google.com> usb: gadget: Store endpoint pointer in usb_request Guoniu Zhou <guoniu.zhou(a)nxp.com> media: nxp: imx8-isi: m2m: Fix streaming cleanup on release Mario Limonciello (AMD) <superm1(a)kernel.org> drm/amd: Fix hybrid sleep Mario Limonciello (AMD) <superm1(a)kernel.org> PM: hibernate: Add pm_hibernation_mode_is_suspend() Mario Limonciello <mario.limonciello(a)amd.com> drm/amd: Check whether secure display TA loaded successfully Adrian Hunter <adrian.hunter(a)intel.com> perf/core: Fix MMAP2 event device with backing files Adrian Hunter <adrian.hunter(a)intel.com> perf/core: Fix MMAP event path names with backing files Adrian Hunter <adrian.hunter(a)intel.com> perf/core: Fix address filter match with backing files Kenneth Graunke <kenneth(a)whitecape.org> drm/xe: Increase global invalidation timeout to 1000us Jonathan Kim <jonathan.kim(a)amd.com> drm/amdgpu: fix gfx12 mes packet status return check Gui-Dong Han <hanguidong02(a)gmail.com> drm/amdgpu: use atomic functions with memory barriers for vm fault info Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies Denis Arefev <arefev(a)swemel.ru> ALSA: hda: Fix missing pointer check in hda_component_manager_init function Denis Arefev <arefev(a)swemel.ru> ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state() Takashi Iwai <tiwai(a)suse.de> ALSA: hda/realtek: Add quirk entry for HP ZBook 17 G6 Stuart Hayhurst <stuart.a.hayhurst(a)gmail.com> ALSA: hda/intel: Add MSI X870E Tomahawk to denylist Dave Jiang <dave.jiang(a)intel.com> cxl/acpi: Fix setup of memory resource in cxl_acpi_set_cache_size() Eugene Korenevsky <ekorenevsky(a)aliyun.com> cifs: parse_dfs_referrals: prevent oob on malformed input Celeste Liu <uwu(a)coelacanthus.name> can: gs_usb: increase max interface to U8_MAX Celeste Liu <uwu(a)coelacanthus.name> can: gs_usb: gs_make_candev(): populate net_device->dev_port Filipe Manana <fdmanana(a)suse.com> btrfs: do not assert we found block group item when creating free space tree Miquel Sabaté Solà <mssola(a)mssola.com> btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST Boris Burkov <boris(a)bur.io> btrfs: fix incorrect readahead expansion length Qu Wenruo <wqu(a)suse.com> btrfs: only set the device specific options after devices are opened Miquel Sabaté Solà <mssola(a)mssola.com> btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl Filipe Manana <fdmanana(a)suse.com> btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already running Deepanshu Kartikey <kartikey406(a)gmail.com> ext4: detect invalid INLINE_DATA + EXTENTS flag combination Zhang Yi <yi.zhang(a)huawei.com> ext4: wait for ongoing I/O to complete before freeing blocks Zhang Yi <yi.zhang(a)huawei.com> jbd2: ensure that all ongoing I/O complete before freeing blocks Tim Hostetler <thostet(a)google.com> gve: Check valid ts bit on RX descriptor before hw timestamping Jaegeuk Kim <jaegeuk(a)kernel.org> f2fs: fix wrong block mapping for multi-devices Oliver Upton <oliver.upton(a)linux.dev> KVM: arm64: Prevent access to vCPU events before init Bhanu Seshu Kumar Valluri <bhanuseshukumar(a)gmail.com> net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom Yi Cong <yicong(a)kylinos.cn> r8152: add error handling in rtl8152_driver_init Matthew Schwartz <matthew.schwartz(a)linux.dev> Revert "drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume" Pavel Begunkov <asml.silence(a)gmail.com> io_uring: protect mem region deregistration Jens Axboe <axboe(a)kernel.dk> Revert "io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()" Hao Ge <gehao(a)kylinos.cn> slab: reset slab->obj_ext when freeing and it is OBJEXTS_ALLOC_FAIL Rong Zhang <i(a)rong.moe> x86/CPU/AMD: Prevent reset reasons from being retained across reboot Shuhao Fu <sfual(a)cse.ust.hk> smb: client: Fix refcount leak for cifs_sb_tlink Conor Dooley <conor.dooley(a)microchip.com> rust: cfi: only 64-bit arm and x86 support CFI_CLANG Jedrzej Jagielski <jedrzej.jagielski(a)intel.com> ixgbevf: fix mailbox API compatibility by negotiating supported features Jedrzej Jagielski <jedrzej.jagielski(a)intel.com> ixgbevf: fix getting link speed data for E610 devices Shuicheng Lin <shuicheng.lin(a)intel.com> drm/xe/guc: Check GuC running state before deregistering exec queue Lorenzo Pieralisi <lpieralisi(a)kernel.org> arm64/sysreg: Fix GIC CDEOI instruction encoding Damien Le Moal <dlemoal(a)kernel.org> ata: libata-core: relax checks in ata_read_log_directory() Jan Kara <jack(a)suse.cz> vfs: Don't leak disconnected dentries on umount Inochi Amaoto <inochiama(a)gmail.com> PCI: vmd: Override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info() Andrey Albershteyn <aalbersh(a)redhat.com> Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP" Jonathan Corbet <corbet(a)lwn.net> docs: kdoc: handle the obsolescensce of docutils.ErrorString() ------------- Diffstat: Documentation/arch/arm64/silicon-errata.rst | 2 + Documentation/networking/seg6-sysctl.rst | 3 + Documentation/sphinx/kernel_feat.py | 4 +- Documentation/sphinx/kernel_include.py | 6 +- Documentation/sphinx/maintainers_include.py | 4 +- Makefile | 4 +- arch/Kconfig | 1 + arch/arm64/Kconfig | 1 + arch/arm64/include/asm/cputype.h | 2 + arch/arm64/include/asm/sysreg.h | 11 +- arch/arm64/kernel/cpu_errata.c | 1 + arch/arm64/kernel/entry-common.c | 8 +- arch/arm64/kvm/arm.c | 6 + arch/powerpc/kernel/fadump.c | 3 + arch/riscv/kernel/probes/kprobes.c | 13 +- arch/x86/kernel/cpu/amd.c | 16 +- arch/x86/kernel/cpu/resctrl/monitor.c | 46 ++-- arch/x86/mm/tlb.c | 24 +- block/blk-cgroup.c | 13 +- block/blk-mq-sched.c | 2 +- block/blk-mq-tag.c | 5 +- block/blk-mq.c | 2 +- block/blk-mq.h | 3 +- drivers/accel/qaic/qaic.h | 2 + drivers/accel/qaic/qaic_control.c | 2 +- drivers/accel/qaic/qaic_data.c | 12 +- drivers/accel/qaic/qaic_debugfs.c | 5 +- drivers/accel/qaic/qaic_drv.c | 3 + drivers/ata/libata-core.c | 11 +- drivers/cxl/acpi.c | 2 +- drivers/cxl/core/features.c | 3 + drivers/cxl/core/region.c | 7 +- drivers/cxl/core/trace.h | 2 +- drivers/dpll/zl3073x/core.c | 280 +++++++++++++-------- drivers/dpll/zl3073x/core.h | 3 + drivers/dpll/zl3073x/devlink.c | 18 +- drivers/dpll/zl3073x/regs.h | 3 + drivers/gpu/drm/amd/amdgpu/Makefile | 3 +- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 5 +- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 48 +++- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 54 +++- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h | 2 +- .../gpu/drm/amd/amdgpu/cyan_skillfish_reg_init.c | 56 +++++ drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c | 7 +- drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 7 +- drivers/gpu/drm/amd/amdgpu/mes_v12_0.c | 7 +- drivers/gpu/drm/amd/amdgpu/nv.h | 1 + drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 7 - .../gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 3 +- drivers/gpu/drm/bridge/lontium-lt9211.c | 3 +- drivers/gpu/drm/drm_draw.c | 2 +- drivers/gpu/drm/drm_draw_internal.h | 2 +- drivers/gpu/drm/i915/display/intel_fb.c | 38 +-- drivers/gpu/drm/i915/display/intel_frontbuffer.c | 10 +- .../gpu/drm/i915/gem/i915_gem_object_frontbuffer.h | 2 - drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c | 9 +- drivers/gpu/drm/panthor/panthor_fw.c | 1 + drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 2 +- drivers/gpu/drm/scheduler/sched_main.c | 13 +- drivers/gpu/drm/xe/display/xe_fb_pin.c | 5 +- drivers/gpu/drm/xe/display/xe_plane_initial.c | 3 +- drivers/gpu/drm/xe/regs/xe_gt_regs.h | 1 + drivers/gpu/drm/xe/xe_assert.h | 4 +- drivers/gpu/drm/xe/xe_bo.c | 1 + drivers/gpu/drm/xe/xe_bo.h | 4 +- drivers/gpu/drm/xe/xe_bo_evict.c | 8 - drivers/gpu/drm/xe/xe_bo_types.h | 1 + drivers/gpu/drm/xe/xe_device.c | 22 +- drivers/gpu/drm/xe/xe_device_types.h | 62 +---- drivers/gpu/drm/xe/xe_gt_idle.c | 8 + drivers/gpu/drm/xe/xe_gt_pagefault.c | 13 +- drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c | 3 +- drivers/gpu/drm/xe/xe_guc_submit.c | 13 +- drivers/gpu/drm/xe/xe_migrate.c | 25 +- drivers/gpu/drm/xe/xe_pci.c | 8 + drivers/gpu/drm/xe/xe_query.c | 5 +- drivers/gpu/drm/xe/xe_svm.c | 63 ++--- drivers/gpu/drm/xe/xe_tile.c | 58 +++-- drivers/gpu/drm/xe/xe_tile.h | 14 +- drivers/gpu/drm/xe/xe_ttm_stolen_mgr.c | 10 +- drivers/gpu/drm/xe/xe_ttm_vram_mgr.c | 22 +- drivers/gpu/drm/xe/xe_ttm_vram_mgr.h | 3 +- drivers/gpu/drm/xe/xe_vm.c | 32 ++- drivers/gpu/drm/xe/xe_vm_types.h | 2 + drivers/gpu/drm/xe/xe_vram.c | 245 +++++++++++++----- drivers/gpu/drm/xe/xe_vram.h | 14 +- drivers/gpu/drm/xe/xe_vram_types.h | 85 +++++++ drivers/hid/hid-input.c | 5 +- drivers/hid/hid-multitouch.c | 28 ++- .../intel-quickspi/quickspi-protocol.c | 3 +- drivers/media/platform/nxp/imx8-isi/imx8-isi-m2m.c | 226 +++++++---------- drivers/net/can/m_can/m_can.c | 64 +++-- drivers/net/can/m_can/m_can_platform.c | 2 +- drivers/net/can/usb/gs_usb.c | 23 +- drivers/net/ethernet/airoha/airoha_eth.c | 16 +- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 1 - drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 1 + drivers/net/ethernet/broadcom/tg3.c | 5 +- drivers/net/ethernet/dlink/dl2k.c | 23 +- drivers/net/ethernet/google/gve/gve.h | 2 + drivers/net/ethernet/google/gve/gve_desc_dqo.h | 3 +- drivers/net/ethernet/google/gve/gve_rx_dqo.c | 16 +- drivers/net/ethernet/intel/idpf/idpf_ptp.c | 3 + .../net/ethernet/intel/idpf/idpf_virtchnl_ptp.c | 1 + drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +- drivers/net/ethernet/intel/ixgbevf/defines.h | 1 + drivers/net/ethernet/intel/ixgbevf/ipsec.c | 10 + drivers/net/ethernet/intel/ixgbevf/ixgbevf.h | 7 + drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 34 ++- drivers/net/ethernet/intel/ixgbevf/mbx.h | 8 + drivers/net/ethernet/intel/ixgbevf/vf.c | 182 +++++++++++--- drivers/net/ethernet/intel/ixgbevf/vf.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 1 + drivers/net/ethernet/mediatek/mtk_wed.c | 8 +- drivers/net/ethernet/realtek/r8169_main.c | 5 +- drivers/net/netdevsim/netdev.c | 7 + drivers/net/phy/broadcom.c | 20 +- drivers/net/phy/realtek/realtek_main.c | 23 +- drivers/net/usb/lan78xx.c | 19 +- drivers/net/usb/r8152.c | 7 +- drivers/net/usb/usbnet.c | 2 + drivers/nvme/host/auth.c | 6 +- drivers/nvme/host/multipath.c | 6 +- drivers/nvme/host/tcp.c | 3 + drivers/pci/controller/vmd.c | 13 + drivers/phy/cadence/cdns-dphy.c | 133 +++++++--- drivers/usb/gadget/function/f_acm.c | 42 ++-- drivers/usb/gadget/function/f_ecm.c | 48 ++-- drivers/usb/gadget/function/f_ncm.c | 78 +++--- drivers/usb/gadget/function/f_rndis.c | 85 +++---- drivers/usb/gadget/udc/core.c | 3 + fs/btrfs/extent_io.c | 2 +- fs/btrfs/free-space-tree.c | 15 +- fs/btrfs/ioctl.c | 2 +- fs/btrfs/relocation.c | 13 +- fs/btrfs/super.c | 3 +- fs/btrfs/zoned.c | 2 +- fs/coredump.c | 2 +- fs/dax.c | 2 +- fs/dcache.c | 2 + fs/exec.c | 2 +- fs/ext4/ext4_jbd2.c | 11 +- fs/ext4/inode.c | 8 + fs/f2fs/data.c | 2 +- fs/file_attr.c | 12 +- fs/fuse/ioctl.c | 4 - fs/hfsplus/unicode.c | 24 ++ fs/jbd2/transaction.c | 13 +- fs/nfsd/blocklayout.c | 25 +- fs/nfsd/blocklayoutxdr.c | 86 ++++--- fs/nfsd/blocklayoutxdr.h | 4 +- fs/nfsd/flexfilelayout.c | 8 + fs/nfsd/flexfilelayoutxdr.c | 3 +- fs/nfsd/nfs4layouts.c | 1 - fs/nfsd/nfs4proc.c | 36 ++- fs/nfsd/nfs4xdr.c | 25 +- fs/nfsd/pnfs.h | 1 + fs/nfsd/xdr4.h | 39 ++- fs/overlayfs/copy_up.c | 2 +- fs/overlayfs/inode.c | 5 +- fs/smb/client/inode.c | 6 +- fs/smb/client/misc.c | 17 ++ fs/smb/client/smb2ops.c | 8 +- fs/smb/server/mgmt/user_session.c | 7 +- fs/smb/server/smb2pdu.c | 9 +- fs/smb/server/transport_ipc.c | 12 + fs/xfs/libxfs/xfs_log_format.h | 30 ++- fs/xfs/libxfs/xfs_ondisk.h | 2 + fs/xfs/xfs_log.c | 8 +- fs/xfs/xfs_log_priv.h | 4 +- fs/xfs/xfs_log_recover.c | 34 ++- include/linux/brcmphy.h | 1 + include/linux/libata.h | 6 + include/linux/suspend.h | 6 + include/linux/usb/gadget.h | 25 ++ include/net/ip_tunnels.h | 15 ++ include/uapi/drm/amdgpu_drm.h | 21 -- io_uring/register.c | 1 + io_uring/rw.c | 2 +- kernel/events/core.c | 8 +- kernel/power/hibernate.c | 11 + kernel/sched/core.c | 2 + kernel/sched/deadline.c | 3 + kernel/sched/fair.c | 26 +- mm/slub.c | 9 +- net/can/j1939/main.c | 2 + net/core/dev.c | 40 ++- net/ipv4/ip_tunnel.c | 14 -- net/ipv4/tcp_output.c | 19 +- net/ipv6/ip6_tunnel.c | 3 +- net/tls/tls_main.c | 7 +- net/tls/tls_sw.c | 31 ++- rust/kernel/cpufreq.rs | 3 +- sound/firewire/amdtp-stream.h | 2 +- sound/hda/codecs/realtek/alc269.c | 1 + sound/hda/codecs/side-codecs/cs35l41_hda.c | 2 + sound/hda/codecs/side-codecs/hda_component.c | 4 + sound/hda/controllers/intel.c | 1 + sound/soc/amd/acp/acp-sdw-sof-mach.c | 2 +- sound/soc/codecs/idt821034.c | 12 +- sound/soc/codecs/nau8821.c | 115 +++++---- sound/usb/card.c | 10 +- .../testing/selftests/bpf/prog_tests/arg_parsing.c | 12 +- tools/testing/selftests/net/rtnetlink.sh | 2 + tools/testing/selftests/net/vlan_bridge_binding.sh | 2 + 209 files changed, 2401 insertions(+), 1254 deletions(-)

1 week, 6 days

14
13
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror